This paper proposes the use of quadrangular Bézier
patches to model and modify the shape of the boundary for
linear elasticity problems in 3D. The representation of the
boundary in this way derives directly from computer graphics
and have been analytically included in developed by the
authors parametric integral equation systems (PIES). PIES
are the modified classical boundary integral equations (BIE)
in which the shape of the boundary can be modeled using a
wide range of parametric curves and surfaces. The proposed
approach eliminates the need for domain and boundary
discretization in the process of solving boundary value
problems, in contrast to popular traditional methods like FEM
and BEM. On the basis of the proposed approach, a computer
code has been written and examined through numerical
examples.
Domain tying across virtual interfaces: coupling X-FEM with the Mortar methodBasavaRaju Akula
In this paper we propose a unified framework of the mortar domain decomposition method and extended finite element method (X-FEM). This framework allows to deal in an efficient manner with two cumbersome aspects of the finite element methods, namely incompatible interface discretizations and internal discontinuities. Features of mortar methods in the context of mesh tying, and of X-FEM in the context of void/inclusion treatment are exploited to formulate the weak coupling along an inclusion’s surface and the virtual surface of the host mesh. It has a potential to address a multitude of problems
from accurate substructuring to efficient wear simulation in contact problems.
Domain tying across virtual interfaces: coupling X-FEM with the Mortar methodBasavaRaju Akula
In this paper we propose a unified framework of the mortar domain decomposition method and extended finite element method (X-FEM). This framework allows to deal in an efficient manner with two cumbersome aspects of the finite element methods, namely incompatible interface discretizations and internal discontinuities. Features of mortar methods in the context of mesh tying, and of X-FEM in the context of void/inclusion treatment are exploited to formulate the weak coupling along an inclusion’s surface and the virtual surface of the host mesh. It has a potential to address a multitude of problems
from accurate substructuring to efficient wear simulation in contact problems.
The Effectiveness of PIES Compared to BEM in the Modelling of 3D Polygonal Pr...IDES Editor
The paper presents the effectiveness of the
parametric integral equation system (PIES) in solving 3D
boundary problems defined by Navier-Lame equations on the
example of the polygonal boundary and in comparison with
the boundary element method (BEM). Analysis was performed
using the commercial software “BEASY” which bases on the
BEM method, whilst in the case of PIES using an authors
software. On the basis of two examples the number of data
necessary to modeling of the boundary geometry, the number
of solved algebraic equations and the stability and accuracy
of the obtained numerical results were compared.
Java3D is an Application Programming Interface used for writing 3D graphics applications and applets. This paper gives a short introduction of java3D, analyses the mathematics of Hermite, Bezier, FourPoints, B-Splines curve, and describes implementation of curve creation and curve
operations using Java3D API.
Image segmentation Based on Chan-Vese Active Contours using Finite Difference...ijsrd.com
There are a lot of image segmentation techniques that try to differentiate between backgrounds and object pixels but many of them fail to discriminate between different objects that are close to each other, e.g. low contrast between foreground and background regions increase the difficulty for segmenting images. So we introduced the Chan-Vese active contours model for image segmentation to detect the objects in given image, which is built based on techniques of curve evolution and level set method. The Chan-Vese model is a special case of Mumford-Shah functional for segmentation and level sets. It differs from other active contour models in that it is not edge dependent, therefore it is more capable of detecting objects whose boundaries may not be defined by a gradient. Finally, we developed code in Matlab 7.8 for solving resulting Partial differential equation numerically by the finite differences schemes on pixel-by-pixel domain.
Representation of curves using cubic polynomials, Hermite form, Bezier form; Surface modelling representations and Solid modelling using B-Rep and CSG techniques are presented in this slide.
Power System State Estimation - A ReviewIDES Editor
The aim of this article is to provide a comprehensive
survey on power system state estimation techniques. The
algorithms used for finding the system states under both static
and dynamic state estimations are discussed in brief. The
authors are opinion that the scope of pursuing research in the
area of state estimation with PMU and SCADA measurements
is the state of the art and timely.
Artificial Intelligence Technique based Reactive Power Planning Incorporating...IDES Editor
Reactive Power Planning is a major concern in the
operation and control of power systems This paper compares
the effectiveness of Evolutionary Programming (EP) and
New Improved Differential Evolution (NIMDE) to solve
Reactive Power Planning (RPP) problem incorporating
FACTS Controllers like Static VAR Compensator (SVC),
Thyristor Controlled Series Capacitor (TCSC) and Unified
power flow controller (UPFC) considering voltage stability.
With help of Fast Voltage Stability Index (FVSI), the critical
lines and buses are identified to install the FACTS controllers.
The optimal settings of the control variables of the generator
voltages,transformer tap settings and allocation and parameter
settings of the SVC,TCSC,UPFC are considered for reactive
power planning. The test and Validation of the proposed
algorithm are conducted on IEEE 30–bus system and 72-bus
Indian system.Simulation results shows that the UPFC gives
better results than SVC and TCSC and the FACTS controllers
reduce the system losses.
Design and Performance Analysis of Genetic based PID-PSS with SVC in a Multi-...IDES Editor
Damping of power system oscillations with the help
of proposed optimal Proportional Integral Derivative Power
System Stabilizer (PID-PSS) and Static Var Compensator
(SVC)-based controllers are thoroughly investigated in this
paper. This study presents robust tuning of PID-PSS and
SVC-based controllers using Genetic Algorithms (GA) in
multi machine power systems by considering detailed model
of the generators (model 1.1). The effectiveness of FACTSbased
controllers in general and SVC-based controller in
particular depends upon their proper location. Modal
controllability and observability are used to locate SVC–based
controller. The performance of the proposed controllers is
compared with conventional lead-lag power system stabilizer
(CPSS) and demonstrated on 10 machines, 39 bus New England
test system. Simulation studies show that the proposed genetic
based PID-PSS with SVC based controller provides better
performance.
Optimal Placement of DG for Loss Reduction and Voltage Sag Mitigation in Radi...IDES Editor
This paper presents the need to operate the power
system economically and with optimum levels of voltages has
further led to an increase in interest in Distributed
Generation. In order to reduce the power losses and to improve
the voltage in the distribution system, distributed generators
(DGs) are connected to load bus. To reduce the total power
losses in the system, the most important process is to identify
the proper location for fixing and sizing of DGs. It presents a
new methodology using a new population based meta heuristic
approach namely Artificial Bee Colony algorithm(ABC) for
the placement of Distributed Generators(DG) in the radial
distribution systems to reduce the real power losses and to
improve the voltage profile, voltage sag mitigation. The power
loss reduction is important factor for utility companies because
it is directly proportional to the company benefits in a
competitive electricity market, while reaching the better power
quality standards is too important as it has vital effect on
customer orientation. In this paper an ABC algorithm is
developed to gain these goals all together. In order to evaluate
sag mitigation capability of the proposed algorithm, voltage
in voltage sensitive buses is investigated. An existing 20KV
network has been chosen as test network and results are
compared with the proposed method in the radial distribution
system.
Line Losses in the 14-Bus Power System Network using UPFCIDES Editor
Controlling power flow in modern power systems
can be made more flexible by the use of recent developments
in power electronic and computing control technology. The
Unified Power Flow Controller (UPFC) is a Flexible AC
transmission system (FACTS) device that can control all the
three system variables namely line reactance, magnitude and
phase angle difference of voltage across the line. The UPFC
provides a promising means to control power flow in modern
power systems. Essentially the performance depends on proper
control setting achievable through a power flow analysis
program. This paper presents a reliable method to meet the
requirements by developing a Newton-Raphson based load
flow calculation through which control settings of UPFC can
be determined for the pre-specified power flow between the
lines. The proposed method keeps Newton-Raphson Load Flow
(NRLF) algorithm intact and needs (little modification in the
Jacobian matrix). A MATLAB program has been developed to
calculate the control settings of UPFC and the power flow
between the lines after the load flow is converged. Case studies
have been performed on IEEE 5-bus system and 14-bus system
to show that the proposed method is effective. These studies
indicate that the method maintains the basic NRLF properties
such as fast computational speed, high degree of accuracy and
good convergence rate.
Study of Structural Behaviour of Gravity Dam with Various Features of Gallery...IDES Editor
The size and shape of opening in dam causes the
stress concentration, it also causes the stress variation in the
rest of the dam cross section. The gravity method of the analysis
does not consider the size of opening and the elastic property
of dam material. Thus the objective of study is comprises of
the Finite Element Method which considers the size of
opening, elastic property of material, and stress distribution
because of geometric discontinuity in cross section of dam.
Stress concentration inside the dam increases with the opening
in dam which results in the failure of dam. Hence it is
necessary to analyses large opening inside the dam. By making
the percentage area of opening constant and varying size and
shape of opening the analysis is carried out. For this purpose
a section of Koyna Dam is considered. Dam is defined as a
plane strain element in FEM, based on geometry and loading
condition. Thus this available information specified our path
of approach to carry out 2D plane strain analysis. The results
obtained are then compared mutually to get most efficient
way of providing large opening in the gravity dam.
Assessing Uncertainty of Pushover Analysis to Geometric ModelingIDES Editor
Pushover Analysis a popular tool for seismic
performance evaluation of existing and new structures and is
nonlinear Static procedure where in monotonically increasing
loads are applied to the structure till the structure is unable
to resist the further load .During the analysis, whatever the
strength of concrete and steel is adopted for analysis of
structure may not be the same when real structure is
constructed and the pushover analysis results are very sensitive
to material model adopted, geometric model adopted, location
of plastic hinges and in general to procedure followed by the
analyzer. In this paper attempt has been made to assess
uncertainty in pushover analysis results by considering user
defined hinges and frame modeled as bare frame and frame
with slab modeled as rigid diaphragm and results compared
with experimental observations. Uncertain parameters
considered includes the strength of concrete, strength of steel
and cover to the reinforcement which are randomly generated
and incorporated into the analysis. The results are then
compared with experimental observations.
Secure Multi-Party Negotiation: An Analysis for Electronic Payments in Mobile...IDES Editor
This paper is an attempt to base on auctions which
presents a frame work for the secure multi-party decision
protocols. In addition to the implementations which are very
light weighted, the main focus is on synchronizing security
features for avoiding agreements manipulations and reducing
the user traffic. Through this paper one can understand that
this different auction protocols on top of the frame work can
be collaborated using mobile devices. This paper present the
negotiation between auctioneer and the proffered and this
negotiation shows that multiparty security is far better than
the existing system.
Selfish Node Isolation & Incentivation using Progressive ThresholdsIDES Editor
The problems associated with selfish nodes in
MANET are addressed by a collaborative watchdog approach
which reduces the detection time for selfish nodes thereby
improves the performance and accuracy of watchdogs[1]. In
the related works they make use of credit based systems, reputation
based mechanisms, pathrater and watchdog mechanism
to detect such selfish nodes. In this paper we follow an approach
of collaborative watchdog which reduces the detection
time for selfish nodes and also involves the removal of such
selfish nodes based on some progressively assessed thresholds.
The threshold gives the nodes a chance to stop misbehaving
before it is permanently deleted from the network.
The node passes through several isolation processes before it
is permanently removed. Another version of AODV protocol
is used here which allows the simulation of selfish nodes in
NS2 by adding or modifying log files in the protocol.
Various OSI Layer Attacks and Countermeasure to Enhance the Performance of WS...IDES Editor
Wireless sensor networks are networks having non
wired infrastructure and dynamic topology. In OSI model each
layer is prone to various attacks, which halts the performance
of a network .In this paper several attacks on four layers of
OSI model are discussed and security mechanism is described
to prevent attack in network layer i.e wormhole attack. In
Wormhole attack two or more malicious nodes makes a covert
channel which attracts the traffic towards itself by depicting a
low latency link and then start dropping and replaying packets
in the multi-path route. This paper proposes promiscuous mode
method to detect and isolate the malicious node during
wormhole attack by using Ad-hoc on demand distance vector
routing protocol (AODV) with omnidirectional antenna. The
methodology implemented notifies that the nodes which are
not participating in multi-path routing generates an alarm
message during delay and then detects and isolate the
malicious node from network. We also notice that not only
the same kind of attacks but also the same kind of
countermeasures can appear in multiple layer. For example,
misbehavior detection techniques can be applied to almost all
the layers we discussed.
Responsive Parameter based an AntiWorm Approach to Prevent Wormhole Attack in...IDES Editor
The recent advancements in the wireless technology
and their wide-spread deployment have made remarkable
enhancements in efficiency in the corporate and industrial
and Military sectors The increasing popularity and usage of
wireless technology is creating a need for more secure wireless
Ad hoc networks. This paper aims researched and developed
a new protocol that prevents wormhole attacks on a ad hoc
network. A few existing protocols detect wormhole attacks but
they require highly specialized equipment not found on most
wireless devices. This paper aims to develop a defense against
wormhole attacks as an Anti-worm protocol which is based on
responsive parameters, that does not require as a significant
amount of specialized equipment, trick clock synchronization,
no GPS dependencies.
Cloud Security and Data Integrity with Client Accountability FrameworkIDES Editor
The Cloud based services provide much efficient
and seamless ways for data sharing across the cloud. The fact
that the data owners no longer possess data makes it very
difficult to assure data confidentiality and to enable secure
data sharing in the cloud. Despite of all its advantages this
will remain a major limitation that acts as a barrier to the
wider deployment of cloud based services. One of the possible
ways for ensuring trust in this aspect is the introduction of
accountability feature in the cloud computing scenario. The
Cloud framework requires promotion of distributed
accountability for such dynamic environment[1]. In some
works, there‘s an accountable framework suggested to ensure
distributed accountability for data sharing by the generation
of only a log of data access, but without any embedded feedback
mechanism for owner permission towards data
protection[2].The proposed system is an enhanced client
accountability framework which provides an additional client
side verification for each access towards enhanced security of
data. The integrity of content of data which resides in the
cloud service provider is also maintained by secured
outsourcing. Besides, the authentication of JAR(Java Archive)
files are done to ensure file protection and to maintain a safer
environment for data sharing. The analysis of various
functionalities of the framework depicts both the
accountability and security feature in an efficient manner.
More Related Content
Similar to Quadrangular Bézier Patches in Modeling and Modification of the Curvilinear Boundary Surface in 3D Problems of the Theory of Linear Elasticity in PIES
The Effectiveness of PIES Compared to BEM in the Modelling of 3D Polygonal Pr...IDES Editor
The paper presents the effectiveness of the
parametric integral equation system (PIES) in solving 3D
boundary problems defined by Navier-Lame equations on the
example of the polygonal boundary and in comparison with
the boundary element method (BEM). Analysis was performed
using the commercial software “BEASY” which bases on the
BEM method, whilst in the case of PIES using an authors
software. On the basis of two examples the number of data
necessary to modeling of the boundary geometry, the number
of solved algebraic equations and the stability and accuracy
of the obtained numerical results were compared.
Java3D is an Application Programming Interface used for writing 3D graphics applications and applets. This paper gives a short introduction of java3D, analyses the mathematics of Hermite, Bezier, FourPoints, B-Splines curve, and describes implementation of curve creation and curve
operations using Java3D API.
Image segmentation Based on Chan-Vese Active Contours using Finite Difference...ijsrd.com
There are a lot of image segmentation techniques that try to differentiate between backgrounds and object pixels but many of them fail to discriminate between different objects that are close to each other, e.g. low contrast between foreground and background regions increase the difficulty for segmenting images. So we introduced the Chan-Vese active contours model for image segmentation to detect the objects in given image, which is built based on techniques of curve evolution and level set method. The Chan-Vese model is a special case of Mumford-Shah functional for segmentation and level sets. It differs from other active contour models in that it is not edge dependent, therefore it is more capable of detecting objects whose boundaries may not be defined by a gradient. Finally, we developed code in Matlab 7.8 for solving resulting Partial differential equation numerically by the finite differences schemes on pixel-by-pixel domain.
Representation of curves using cubic polynomials, Hermite form, Bezier form; Surface modelling representations and Solid modelling using B-Rep and CSG techniques are presented in this slide.
Similar to Quadrangular Bézier Patches in Modeling and Modification of the Curvilinear Boundary Surface in 3D Problems of the Theory of Linear Elasticity in PIES (10)
Power System State Estimation - A ReviewIDES Editor
The aim of this article is to provide a comprehensive
survey on power system state estimation techniques. The
algorithms used for finding the system states under both static
and dynamic state estimations are discussed in brief. The
authors are opinion that the scope of pursuing research in the
area of state estimation with PMU and SCADA measurements
is the state of the art and timely.
Artificial Intelligence Technique based Reactive Power Planning Incorporating...IDES Editor
Reactive Power Planning is a major concern in the
operation and control of power systems This paper compares
the effectiveness of Evolutionary Programming (EP) and
New Improved Differential Evolution (NIMDE) to solve
Reactive Power Planning (RPP) problem incorporating
FACTS Controllers like Static VAR Compensator (SVC),
Thyristor Controlled Series Capacitor (TCSC) and Unified
power flow controller (UPFC) considering voltage stability.
With help of Fast Voltage Stability Index (FVSI), the critical
lines and buses are identified to install the FACTS controllers.
The optimal settings of the control variables of the generator
voltages,transformer tap settings and allocation and parameter
settings of the SVC,TCSC,UPFC are considered for reactive
power planning. The test and Validation of the proposed
algorithm are conducted on IEEE 30–bus system and 72-bus
Indian system.Simulation results shows that the UPFC gives
better results than SVC and TCSC and the FACTS controllers
reduce the system losses.
Design and Performance Analysis of Genetic based PID-PSS with SVC in a Multi-...IDES Editor
Damping of power system oscillations with the help
of proposed optimal Proportional Integral Derivative Power
System Stabilizer (PID-PSS) and Static Var Compensator
(SVC)-based controllers are thoroughly investigated in this
paper. This study presents robust tuning of PID-PSS and
SVC-based controllers using Genetic Algorithms (GA) in
multi machine power systems by considering detailed model
of the generators (model 1.1). The effectiveness of FACTSbased
controllers in general and SVC-based controller in
particular depends upon their proper location. Modal
controllability and observability are used to locate SVC–based
controller. The performance of the proposed controllers is
compared with conventional lead-lag power system stabilizer
(CPSS) and demonstrated on 10 machines, 39 bus New England
test system. Simulation studies show that the proposed genetic
based PID-PSS with SVC based controller provides better
performance.
Optimal Placement of DG for Loss Reduction and Voltage Sag Mitigation in Radi...IDES Editor
This paper presents the need to operate the power
system economically and with optimum levels of voltages has
further led to an increase in interest in Distributed
Generation. In order to reduce the power losses and to improve
the voltage in the distribution system, distributed generators
(DGs) are connected to load bus. To reduce the total power
losses in the system, the most important process is to identify
the proper location for fixing and sizing of DGs. It presents a
new methodology using a new population based meta heuristic
approach namely Artificial Bee Colony algorithm(ABC) for
the placement of Distributed Generators(DG) in the radial
distribution systems to reduce the real power losses and to
improve the voltage profile, voltage sag mitigation. The power
loss reduction is important factor for utility companies because
it is directly proportional to the company benefits in a
competitive electricity market, while reaching the better power
quality standards is too important as it has vital effect on
customer orientation. In this paper an ABC algorithm is
developed to gain these goals all together. In order to evaluate
sag mitigation capability of the proposed algorithm, voltage
in voltage sensitive buses is investigated. An existing 20KV
network has been chosen as test network and results are
compared with the proposed method in the radial distribution
system.
Line Losses in the 14-Bus Power System Network using UPFCIDES Editor
Controlling power flow in modern power systems
can be made more flexible by the use of recent developments
in power electronic and computing control technology. The
Unified Power Flow Controller (UPFC) is a Flexible AC
transmission system (FACTS) device that can control all the
three system variables namely line reactance, magnitude and
phase angle difference of voltage across the line. The UPFC
provides a promising means to control power flow in modern
power systems. Essentially the performance depends on proper
control setting achievable through a power flow analysis
program. This paper presents a reliable method to meet the
requirements by developing a Newton-Raphson based load
flow calculation through which control settings of UPFC can
be determined for the pre-specified power flow between the
lines. The proposed method keeps Newton-Raphson Load Flow
(NRLF) algorithm intact and needs (little modification in the
Jacobian matrix). A MATLAB program has been developed to
calculate the control settings of UPFC and the power flow
between the lines after the load flow is converged. Case studies
have been performed on IEEE 5-bus system and 14-bus system
to show that the proposed method is effective. These studies
indicate that the method maintains the basic NRLF properties
such as fast computational speed, high degree of accuracy and
good convergence rate.
Study of Structural Behaviour of Gravity Dam with Various Features of Gallery...IDES Editor
The size and shape of opening in dam causes the
stress concentration, it also causes the stress variation in the
rest of the dam cross section. The gravity method of the analysis
does not consider the size of opening and the elastic property
of dam material. Thus the objective of study is comprises of
the Finite Element Method which considers the size of
opening, elastic property of material, and stress distribution
because of geometric discontinuity in cross section of dam.
Stress concentration inside the dam increases with the opening
in dam which results in the failure of dam. Hence it is
necessary to analyses large opening inside the dam. By making
the percentage area of opening constant and varying size and
shape of opening the analysis is carried out. For this purpose
a section of Koyna Dam is considered. Dam is defined as a
plane strain element in FEM, based on geometry and loading
condition. Thus this available information specified our path
of approach to carry out 2D plane strain analysis. The results
obtained are then compared mutually to get most efficient
way of providing large opening in the gravity dam.
Assessing Uncertainty of Pushover Analysis to Geometric ModelingIDES Editor
Pushover Analysis a popular tool for seismic
performance evaluation of existing and new structures and is
nonlinear Static procedure where in monotonically increasing
loads are applied to the structure till the structure is unable
to resist the further load .During the analysis, whatever the
strength of concrete and steel is adopted for analysis of
structure may not be the same when real structure is
constructed and the pushover analysis results are very sensitive
to material model adopted, geometric model adopted, location
of plastic hinges and in general to procedure followed by the
analyzer. In this paper attempt has been made to assess
uncertainty in pushover analysis results by considering user
defined hinges and frame modeled as bare frame and frame
with slab modeled as rigid diaphragm and results compared
with experimental observations. Uncertain parameters
considered includes the strength of concrete, strength of steel
and cover to the reinforcement which are randomly generated
and incorporated into the analysis. The results are then
compared with experimental observations.
Secure Multi-Party Negotiation: An Analysis for Electronic Payments in Mobile...IDES Editor
This paper is an attempt to base on auctions which
presents a frame work for the secure multi-party decision
protocols. In addition to the implementations which are very
light weighted, the main focus is on synchronizing security
features for avoiding agreements manipulations and reducing
the user traffic. Through this paper one can understand that
this different auction protocols on top of the frame work can
be collaborated using mobile devices. This paper present the
negotiation between auctioneer and the proffered and this
negotiation shows that multiparty security is far better than
the existing system.
Selfish Node Isolation & Incentivation using Progressive ThresholdsIDES Editor
The problems associated with selfish nodes in
MANET are addressed by a collaborative watchdog approach
which reduces the detection time for selfish nodes thereby
improves the performance and accuracy of watchdogs[1]. In
the related works they make use of credit based systems, reputation
based mechanisms, pathrater and watchdog mechanism
to detect such selfish nodes. In this paper we follow an approach
of collaborative watchdog which reduces the detection
time for selfish nodes and also involves the removal of such
selfish nodes based on some progressively assessed thresholds.
The threshold gives the nodes a chance to stop misbehaving
before it is permanently deleted from the network.
The node passes through several isolation processes before it
is permanently removed. Another version of AODV protocol
is used here which allows the simulation of selfish nodes in
NS2 by adding or modifying log files in the protocol.
Various OSI Layer Attacks and Countermeasure to Enhance the Performance of WS...IDES Editor
Wireless sensor networks are networks having non
wired infrastructure and dynamic topology. In OSI model each
layer is prone to various attacks, which halts the performance
of a network .In this paper several attacks on four layers of
OSI model are discussed and security mechanism is described
to prevent attack in network layer i.e wormhole attack. In
Wormhole attack two or more malicious nodes makes a covert
channel which attracts the traffic towards itself by depicting a
low latency link and then start dropping and replaying packets
in the multi-path route. This paper proposes promiscuous mode
method to detect and isolate the malicious node during
wormhole attack by using Ad-hoc on demand distance vector
routing protocol (AODV) with omnidirectional antenna. The
methodology implemented notifies that the nodes which are
not participating in multi-path routing generates an alarm
message during delay and then detects and isolate the
malicious node from network. We also notice that not only
the same kind of attacks but also the same kind of
countermeasures can appear in multiple layer. For example,
misbehavior detection techniques can be applied to almost all
the layers we discussed.
Responsive Parameter based an AntiWorm Approach to Prevent Wormhole Attack in...IDES Editor
The recent advancements in the wireless technology
and their wide-spread deployment have made remarkable
enhancements in efficiency in the corporate and industrial
and Military sectors The increasing popularity and usage of
wireless technology is creating a need for more secure wireless
Ad hoc networks. This paper aims researched and developed
a new protocol that prevents wormhole attacks on a ad hoc
network. A few existing protocols detect wormhole attacks but
they require highly specialized equipment not found on most
wireless devices. This paper aims to develop a defense against
wormhole attacks as an Anti-worm protocol which is based on
responsive parameters, that does not require as a significant
amount of specialized equipment, trick clock synchronization,
no GPS dependencies.
Cloud Security and Data Integrity with Client Accountability FrameworkIDES Editor
The Cloud based services provide much efficient
and seamless ways for data sharing across the cloud. The fact
that the data owners no longer possess data makes it very
difficult to assure data confidentiality and to enable secure
data sharing in the cloud. Despite of all its advantages this
will remain a major limitation that acts as a barrier to the
wider deployment of cloud based services. One of the possible
ways for ensuring trust in this aspect is the introduction of
accountability feature in the cloud computing scenario. The
Cloud framework requires promotion of distributed
accountability for such dynamic environment[1]. In some
works, there‘s an accountable framework suggested to ensure
distributed accountability for data sharing by the generation
of only a log of data access, but without any embedded feedback
mechanism for owner permission towards data
protection[2].The proposed system is an enhanced client
accountability framework which provides an additional client
side verification for each access towards enhanced security of
data. The integrity of content of data which resides in the
cloud service provider is also maintained by secured
outsourcing. Besides, the authentication of JAR(Java Archive)
files are done to ensure file protection and to maintain a safer
environment for data sharing. The analysis of various
functionalities of the framework depicts both the
accountability and security feature in an efficient manner.
Genetic Algorithm based Layered Detection and Defense of HTTP BotnetIDES Editor
A System state in HTTP botnet uses HTTP protocol
for the creation of chain of Botnets thereby compromising
other systems. By using HTTP protocol and port number 80,
attacks can not only be hidden but also pass through the
firewall without being detected. The DPR based detection
leads to better analysis of botnet attacks [3]. However, it
provides only probabilistic detection of the attacker and also
time consuming and error prone. This paper proposes a Genetic
algorithm based layered approach for detecting as well as
preventing botnet attacks. The paper reviews p2p firewall
implementation which forms the basis of filtering.
Performance evaluation is done based on precision, F-value
and probability. Layered approach reduces the computation
and overall time requirement [7]. Genetic algorithm promises
a low false positive rate.
Enhancing Data Storage Security in Cloud Computing Through SteganographyIDES Editor
in cloud computing data storage is a significant issue
because the entire data reside over a set of interconnected
resource pools that enables the data to be accessed through
virtual machines. It moves the application software’s and
databases to the large data centers where the management of
data is actually done. As the resource pools are situated over
various corners of the world, the management of data and
services may not be fully trustworthy. So, there are various
issues that need to be addressed with respect to the
management of data, service of data, privacy of data, security
of data etc. But the privacy and security of data is highly
challenging. To ensure privacy and security of data-at-rest in
cloud computing, we have proposed an effective and a novel
approach to ensure data security in cloud computing by means
of hiding data within images following is the concept of
steganography. The main objective of this paper is to prevent
data access from cloud data storage centers by unauthorized
users. This scheme perfectly stores data at cloud data storage
centers and retrieves data from it when it is needed.
The main tasks of a Wireless Sensor Network
(WSN) are data collection from its nodes and communication
of this data to the base station (BS). The protocols used for
communication among the WSN nodes and between the WSN
and the BS, must consider the resource constraints of nodes,
battery energy, computational capabilities and memory. The
WSN applications involve unattended operation of the network
over an extended period of time. In order to extend the lifetime
of a WSN, efficient routing protocols need to be adopted. The
proposed low power routing protocol based on tree-based
network structure reliably forwards the measured data towards
the BS using TDMA. An energy consumption analysis of the
WSN making use of this protocol is also carried out. It is
found that the network is energy efficient with an average
duty cycle of 0:7% for the WSN nodes. The OmNET++
simulation platform along with MiXiM framework is made
use of.
Permutation of Pixels within the Shares of Visual Cryptography using KBRP for...IDES Editor
The security of authentication of internet based
co-banking services should not be susceptible to high risks.
The passwords are highly vulnerable to virus attacks due to
the lack of high end embedding of security methods. In order
for the passwords to be more secure, people are generally
compelled to select jumbled up character based passwords
which are not only less memorable but are also equally prone
to insecurity. Multiple use of distributed shares has been
studied to solve the problem of authentication by algorithms
based on thresholding of pixels in image processing and visual
cryptography concepts where the subset of shares is considered
for the recovery of the original image for authentication using
correlation function[1][2].The main disadvantage in the above
study is the plain storage of shares and also one of the shares
is being supplied to the customer, which will lead to the
possibility of misuse by a third party. This paper proposes a
technique for scrambling of pixels by key based random
permutation (KBRP) within the shares before the
authentication has been attempted. Total number of shares to
be created is dependent on the multiplicity of ownership of
the account. By this method the problem of uncertainty among
the customers with regard to security, storage, retrieval of
holding of half of the shares is minimized.
This paper presents a trifocal Rotman Lens Design
approach. The effects of focal ratio and element spacing on
the performance of Rotman Lens are described. A three beam
prototype feeding 4 element antenna array working in L-band
has been simulated using RLD v1.7 software. Simulated
results show that the simulated lens has a return loss of –
12.4dB at 1.8GHz. Beam to array port phase error variation
with change in the focal ratio and element spacing has also
been investigated.
Band Clustering for the Lossless Compression of AVIRIS Hyperspectral ImagesIDES Editor
Hyperspectral images can be efficiently compressed
through a linear predictive model, as for example the one
used in the SLSQ algorithm. In this paper we exploit this
predictive model on the AVIRIS images by individuating,
through an off-line approach, a common subset of bands, which
are not spectrally related with any other bands. These bands
are not useful as prediction reference for the SLSQ 3-D
predictive model and we need to encode them via other
prediction strategies which consider only spatial correlation.
We have obtained this subset by clustering the AVIRIS bands
via the clustering by compression approach. The main result
of this paper is the list of the bands, not related with the
others, for AVIRIS images. The clustering trees obtained for
AVIRIS and the relationship among bands they depict is also
an interesting starting point for future research.
Microelectronic Circuit Analogous to Hydrogen Bonding Network in Active Site ...IDES Editor
A microelectronic circuit of block-elements
functionally analogous to two hydrogen bonding networks is
investigated. The hydrogen bonding networks are extracted
from â-lactamase protein and are formed in its active site.
Each hydrogen bond of the network is described in equivalent
electrical circuit by three or four-terminal block-element.
Each block-element is coded in Matlab. Static and dynamic
analyses are performed. The resultant microelectronic circuit
analogous to the hydrogen bonding network operates as
current mirror, sine pulse source, triangular pulse source as
well as signal modulator.
Texture Unit based Monocular Real-world Scene Classification using SOM and KN...IDES Editor
In this paper a method is proposed to discriminate
real world scenes in to natural and manmade scenes of similar
depth. Global-roughness of a scene image varies as a function
of image-depth. Increase in image depth leads to increase in
roughness in manmade scenes; on the contrary natural scenes
exhibit smooth behavior at higher image depth. This particular
arrangement of pixels in scene structure can be well explained
by local texture information in a pixel and its neighborhood.
Our proposed method analyses local texture information of a
scene image using texture unit matrix. For final classification
we have used both supervised and unsupervised learning using
K-Nearest Neighbor classifier (KNN) and Self Organizing
Map (SOM) respectively. This technique is useful for online
classification due to very less computational complexity.
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
GridMate - End to end testing is a critical piece to ensure quality and avoid...ThomasParaiso2
End to end testing is a critical piece to ensure quality and avoid regressions. In this session, we share our journey building an E2E testing pipeline for GridMate components (LWC and Aura) using Cypress, JSForce, FakerJS…
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.