Thank you very much for using Quadcept.
We are offering the new version 9.3.6 that provides new features, improvements and enhancements for a better development environment and service.
Motor-CAD provides links to integrate with ANSYS, Dynardo, Maxwell, Fluent, Icepak, Motor-LAB, and OptiSLang software packages to simplify and speed up electric motor design simulations and calculations. It passes geometry, material properties, and other data to these packages to automatically set up simulations. Results like efficiency maps and thermal data can then be imported back into Motor-CAD to validate models and perform combined multi-physics simulations and optimizations.
Motor-CAD can automatically transfer geometry, material properties, excitations, and boundary conditions to Maxwell for electromagnetic analysis. Electromagnetic results from Maxwell can be imported into Motor-CAD for efficiency mapping and thermal analysis over duty cycles. Motor-CAD geometry can also be exported to ANSYS Workbench and CFD tools like Fluent to enable detailed flow and heat transfer modeling to validate and calibrate Motor-CAD's convection formulations. Links between Motor-CAD and ANSYS multi-physics software simplify and expedite complex motor design simulations and analysis.
High speed and energy-efficient carry skip adder operating under a wide range...LogicMindtech Nologies
This document describes a carry skip adder structure that has higher speed and lower energy consumption than conventional carry skip adders. It achieves speed enhancement through concatenation and incrementation schemes to improve the efficiency of conventional carry skip adders. The proposed structure uses AND-OR-Invert and OR-AND-Invert compound gates for skip logic instead of multiplexers. Simulations show the proposed structure has on average 44% lower delay and 38% lower energy compared to conventional carry skip adders. It also has the lowest power-delay product and energy-delay product that is almost the same as a Kogge-Stone parallel prefix adder but with smaller area and power consumption.
Evolution and roadmap ibm power_system_onepageNengkuan Tu
This document summarizes the Power processor roadmap from 1990 to 2020. It discusses key technologies and features introduced at each step like 64-bit support, multi-processing, simplified processor offerings, NUMA, hypervisor support, and larger page sizes. It notes how the focus has evolved from performance and scale to virtualization and cloud computing. It outlines new directions for Power10 like support for emerging workloads in big data, IoT, AI through technologies like accelerators, GPUs, and high-speed interconnects between components.
This document discusses datapath design and arithmetic operations in computer architecture. It covers:
1) The design of circuits to implement basic fixed-point arithmetic instructions like addition, subtraction, multiplication, and division. Multiplication can be done with combinational or sequential circuits using an array of adders, while division is typically sequential using repeated subtraction.
2) The Arithmetic Logic Unit (ALU) is used to process arithmetic and logical instructions and employs a chain of identical 1-bit adders. Coprocessors can provide fast hardware implementations for complex arithmetic functions.
3) Pipeline processing is used to improve processor throughput by dividing arithmetic operations into stages to allow overlapped processing, at the cost of requiring more hardware resources
Motor-CAD can automatically transfer geometry, material properties, excitations, and boundary conditions to Maxwell for electromagnetic analysis. Electromagnetic results from Maxwell can be imported into Motor-CAD for efficiency mapping and thermal analysis over duty cycles. Motor-CAD geometry can also be exported to ANSYS Workbench and CFD tools like Fluent to allow for detailed flow and heat transfer modeling to validate and calibrate Motor-CAD's convection formulations. Links between Motor-CAD and multi-physics tools like ANSYS and Icepak are being developed to simplify and accelerate integrated magnetic, thermal, and stress analysis calculations.
The Sun Fire X4500 server is the industry's first data server, integrating AMD Opteron processors with massive storage and throughput to deliver the highest storage density, incredibly high throughput rates, and prices half of traditional solutions, allowing customers to deploy applications in new cost-effective ways.
Thank you very much for using Quadcept.
We are offering the new version 9.3.15 that provides new features, improvements and enhancements for a better development environment and service.
Motor-CAD provides links to integrate with ANSYS, Dynardo, Maxwell, Fluent, Icepak, Motor-LAB, and OptiSLang software packages to simplify and speed up electric motor design simulations and calculations. It passes geometry, material properties, and other data to these packages to automatically set up simulations. Results like efficiency maps and thermal data can then be imported back into Motor-CAD to validate models and perform combined multi-physics simulations and optimizations.
Motor-CAD can automatically transfer geometry, material properties, excitations, and boundary conditions to Maxwell for electromagnetic analysis. Electromagnetic results from Maxwell can be imported into Motor-CAD for efficiency mapping and thermal analysis over duty cycles. Motor-CAD geometry can also be exported to ANSYS Workbench and CFD tools like Fluent to enable detailed flow and heat transfer modeling to validate and calibrate Motor-CAD's convection formulations. Links between Motor-CAD and ANSYS multi-physics software simplify and expedite complex motor design simulations and analysis.
High speed and energy-efficient carry skip adder operating under a wide range...LogicMindtech Nologies
This document describes a carry skip adder structure that has higher speed and lower energy consumption than conventional carry skip adders. It achieves speed enhancement through concatenation and incrementation schemes to improve the efficiency of conventional carry skip adders. The proposed structure uses AND-OR-Invert and OR-AND-Invert compound gates for skip logic instead of multiplexers. Simulations show the proposed structure has on average 44% lower delay and 38% lower energy compared to conventional carry skip adders. It also has the lowest power-delay product and energy-delay product that is almost the same as a Kogge-Stone parallel prefix adder but with smaller area and power consumption.
Evolution and roadmap ibm power_system_onepageNengkuan Tu
This document summarizes the Power processor roadmap from 1990 to 2020. It discusses key technologies and features introduced at each step like 64-bit support, multi-processing, simplified processor offerings, NUMA, hypervisor support, and larger page sizes. It notes how the focus has evolved from performance and scale to virtualization and cloud computing. It outlines new directions for Power10 like support for emerging workloads in big data, IoT, AI through technologies like accelerators, GPUs, and high-speed interconnects between components.
This document discusses datapath design and arithmetic operations in computer architecture. It covers:
1) The design of circuits to implement basic fixed-point arithmetic instructions like addition, subtraction, multiplication, and division. Multiplication can be done with combinational or sequential circuits using an array of adders, while division is typically sequential using repeated subtraction.
2) The Arithmetic Logic Unit (ALU) is used to process arithmetic and logical instructions and employs a chain of identical 1-bit adders. Coprocessors can provide fast hardware implementations for complex arithmetic functions.
3) Pipeline processing is used to improve processor throughput by dividing arithmetic operations into stages to allow overlapped processing, at the cost of requiring more hardware resources
Motor-CAD can automatically transfer geometry, material properties, excitations, and boundary conditions to Maxwell for electromagnetic analysis. Electromagnetic results from Maxwell can be imported into Motor-CAD for efficiency mapping and thermal analysis over duty cycles. Motor-CAD geometry can also be exported to ANSYS Workbench and CFD tools like Fluent to allow for detailed flow and heat transfer modeling to validate and calibrate Motor-CAD's convection formulations. Links between Motor-CAD and multi-physics tools like ANSYS and Icepak are being developed to simplify and accelerate integrated magnetic, thermal, and stress analysis calculations.
The Sun Fire X4500 server is the industry's first data server, integrating AMD Opteron processors with massive storage and throughput to deliver the highest storage density, incredibly high throughput rates, and prices half of traditional solutions, allowing customers to deploy applications in new cost-effective ways.
Thank you very much for using Quadcept.
We are offering the new version 9.3.15 that provides new features, improvements and enhancements for a better development environment and service.
The release notes describe updates made in Quadcept Ver9.3.8 including:
1. Enhanced the screen capture function to allow taking regional screenshots of selected areas.
2. Added a feature to toggle the visibility of reference leader lines for easier part placement and name adjustments.
3. Added a feature to freely change zoom level increments when zooming in and out of the design area.
Quadcept ver10.7 release note summarizes the key updates and improvements in the latest version, including:
1) Added over 2,300 Toshiba component libraries for improved design capabilities.
2) Enhanced keep out area functionality to better visualize prohibited design rules through layer-specific fill colors and styles.
3) Improved routing efficiency by adding options to fix or change line widths between routing steps.
4) Resolved issues with importing DXF files and improved overall PCB design workflow.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2023/06/state-of-the-art-model-quantization-and-optimization-for-efficient-edge-ai-a-presentation-from-deepx/
Hyunjin Kim, Senior Staff Engineer at DEEPX, presents the “State-of-the-art Model Quantization and Optimization for Efficient Edge AI” tutorial at the May 2023 Embedded Vision Summit.
Extremely efficient edge AI requires more than efficient processors; it also requires tools capable of generating superefficient software. In this talk, Kim explains and demonstrates how DEEPX’s DXNN SDK utilizes state-of-the-art optimization techniques to generate extremely efficient, accurate code for DEEPX’s new M1 neural processor.
Kim begins by describing how the DXNN SDK uses hardware-aware, selective quantization to maintain high accuracy while achieving efficient DNN implementations. Next, he explains how the SDK maps DNN layer operations into processor micro-operations to provide both efficiency and flexibility. Kim also shows how the DEEPX SDK conserves memory by utilizing tiling, layer fusion and feature reuse. Finally, he illustrates the ease of use of the SDK by demonstrating the use of the DXNN SDK to implement a state-of-the-art model on the M1 NPU.
The document provides information about the CP 443-1 communications processor:
- It allows S7-400/S7-400H programmable logic controllers to connect to Industrial Ethernet and supports S7 communication, S5-compatible communication via various interfaces, and time-of-day synchronization.
- It can be configured via MPI or LAN using STEP 7 V3.x or higher and requires compatible S7-400 CPUs.
- The CP supports common communication services and its functionality depends on the version of STEP 7/NCM IE used for configuration.
AFT Arrow apresenta capacidades abrangentes para análise de fluxo de fluidos compressíveis e modelagem de sistemas, combinadas à sua facilidade de uso, desde a construção de modelos através do método drag-and-drop até a completa personalização dos dados de saída. Além da possibilidade de análise de sistemas abertos e fechados, o AFT Arrow inclui uma biblioteca de fluidos e componentes, capacidade de modelagem de ventilador/compressor, de válvula de controle e muito mais. O software vai além dos padrões das análises tradicionais de fluxo de fluido, com capacidades de análises térmicas, incluindo transferência de calor na tubulação, modelagem de trocadores de calor e variação das propriedades dos fluidos.
This document provides release notes for Quadcept version 9.1. It summarizes new features, improvements, and bug fixes in the update. Key additions include enhanced backup features, an improved method for numbering references when placing components, changes to label and port connection specifications to better support multi-sheet designs, and enhancements to route editing capabilities. The update also addresses issues identified by user feedback and makes adjustments to default settings for DRC, ERC and other functions.
The Sysmac Studio software provides a unified design and operation environment for configuring, programming, simulating and monitoring automation systems. It supports configuration of EtherCAT networks and slave terminals, CPU/expansion racks, motion control, and programming of controllers using ladder logic, structured text and inline ST. System requirements include Windows OS, minimum memory and display specifications.
The user guide provides instructions for setting up and using the Wireless-G Access Point. It describes the physical features of the Access Point including the LED lights and ports. It also explains how to connect the Access Point to a network and set up a basic wireless network topology with multiple wireless devices connecting to the Access Point.
Thank you very much for using our Quadcept.
We wish to express our appreciation.
We are offering the new version 9.1.2 that provides new features, improvements and enhancements for a better development environment and service.
AVEVA Instrumentation is a software suite for instrumentation and control engineering that provides tools for design, documentation, and management across the entire plant lifecycle. It comprises four integrated modules for instrument engineering, design, process engineering, and wiring management. The software increases productivity through automated generation of deliverables like loop diagrams, instrument indexes, and cable schedules from a common database.
This document discusses Brückner Maschinenbau's plans to implement a new sensor data analytics system using MongoDB. It notes the large amount of sensor data collected from their packaging film production lines. It evaluates different MongoDB schema designs for storing this sensor data and concludes the bucket schema provides the best performance. The goals are to build a scalable, low-complexity system that enables real-time analytics and intelligent management of production lines. An initial proof-of-concept was successful and the next steps are further developing the user interface, software system, and analytic algorithms.
Thank you very much for using Quadcept.
We are offering the new version 9.3.0 that provides new features, improvements and enhancements for a better development environment and service.
The document provides release notes for Integr8tor version 2018.09. Key highlights include new QED features for minimum trace width, minimum critical trace width, and minimum clearance between traces. The update also allows the user to select keeping the original layer registration during job submission. Other enhancements include improved edge connector and BGA recognition, as well as various code fixes.
The C9200-48P-E is a Cisco Catalyst 9200 48-port PoE+ switch that provides up to 48 ports of full Power over Ethernet Plus capability. It offers simplicity with features like redundant power supply, fans, and modular uplinks. The switch also provides security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems. It can be managed through Cisco Software-Defined Access and Cisco DNA Center for network assurance and improved issue resolution time.
adjust.IT - Improving Spatial Accuracy through ConflationJustin Eldridge
The document describes a conflation project to improve the spatial accuracy of a utility's GIS data. It involved adjusting assets mapped in an old land base to a new, higher accuracy land base using shift models. The methodology included defining shift models, generating shift vectors, adjusting assets in job areas, delivering adjustments to production GIS in groups, and propagating jobs to alternative trees. Visual inspection and customer review were part of the QA/QC process. The approach aimed to preserve network connectivity while allowing continued work during adjustment.
This document provides a user manual for KCam CNC control software version 4.0.25. It includes sections on getting started with KCam, descriptions of the pull down menus and their functions, supported G and M codes, hardware connections, and more. The manual provides concise explanations of how to use KCam's interface elements like the plot window, gcode editor, machine setups, port setup, and jogging controls to design, view, edit and run CNC programs. It also lists file formats KCam can import and export and provides a table of contents to help users navigate the manual.
This document provides an overview and summary of Siemens S7-300 PLC programming. It covers the STEP 7 programming software, comparing CPU models and modules, addressing modules, loading memory, data types, and instructions for statement list programming, logic, math, timers, and more. Programming examples are also included at the end.
The document summarizes the key changes and new features in Version 4.40 of the CAESAR II pipe stress analysis software. Some of the main updates include revised piping codes, addition of the B31.11 code, expanded static load case options, automatic generation of hydrotest load cases, updates to the 3D graphics, and addition of new configuration options. The installation process for Version 4.40 is described, which includes running an installation driver from the included CD-ROM.
Power generation, process automation, and factory automation in manufacturing industries require rigorous, continuous monitoring in the control room. Yokogawa's DX series recorders are purpose-built data acquisition systems designed for industrial automation.
The release notes describe updates made in Quadcept Ver9.3.8 including:
1. Enhanced the screen capture function to allow taking regional screenshots of selected areas.
2. Added a feature to toggle the visibility of reference leader lines for easier part placement and name adjustments.
3. Added a feature to freely change zoom level increments when zooming in and out of the design area.
Quadcept ver10.7 release note summarizes the key updates and improvements in the latest version, including:
1) Added over 2,300 Toshiba component libraries for improved design capabilities.
2) Enhanced keep out area functionality to better visualize prohibited design rules through layer-specific fill colors and styles.
3) Improved routing efficiency by adding options to fix or change line widths between routing steps.
4) Resolved issues with importing DXF files and improved overall PCB design workflow.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2023/06/state-of-the-art-model-quantization-and-optimization-for-efficient-edge-ai-a-presentation-from-deepx/
Hyunjin Kim, Senior Staff Engineer at DEEPX, presents the “State-of-the-art Model Quantization and Optimization for Efficient Edge AI” tutorial at the May 2023 Embedded Vision Summit.
Extremely efficient edge AI requires more than efficient processors; it also requires tools capable of generating superefficient software. In this talk, Kim explains and demonstrates how DEEPX’s DXNN SDK utilizes state-of-the-art optimization techniques to generate extremely efficient, accurate code for DEEPX’s new M1 neural processor.
Kim begins by describing how the DXNN SDK uses hardware-aware, selective quantization to maintain high accuracy while achieving efficient DNN implementations. Next, he explains how the SDK maps DNN layer operations into processor micro-operations to provide both efficiency and flexibility. Kim also shows how the DEEPX SDK conserves memory by utilizing tiling, layer fusion and feature reuse. Finally, he illustrates the ease of use of the SDK by demonstrating the use of the DXNN SDK to implement a state-of-the-art model on the M1 NPU.
The document provides information about the CP 443-1 communications processor:
- It allows S7-400/S7-400H programmable logic controllers to connect to Industrial Ethernet and supports S7 communication, S5-compatible communication via various interfaces, and time-of-day synchronization.
- It can be configured via MPI or LAN using STEP 7 V3.x or higher and requires compatible S7-400 CPUs.
- The CP supports common communication services and its functionality depends on the version of STEP 7/NCM IE used for configuration.
AFT Arrow apresenta capacidades abrangentes para análise de fluxo de fluidos compressíveis e modelagem de sistemas, combinadas à sua facilidade de uso, desde a construção de modelos através do método drag-and-drop até a completa personalização dos dados de saída. Além da possibilidade de análise de sistemas abertos e fechados, o AFT Arrow inclui uma biblioteca de fluidos e componentes, capacidade de modelagem de ventilador/compressor, de válvula de controle e muito mais. O software vai além dos padrões das análises tradicionais de fluxo de fluido, com capacidades de análises térmicas, incluindo transferência de calor na tubulação, modelagem de trocadores de calor e variação das propriedades dos fluidos.
This document provides release notes for Quadcept version 9.1. It summarizes new features, improvements, and bug fixes in the update. Key additions include enhanced backup features, an improved method for numbering references when placing components, changes to label and port connection specifications to better support multi-sheet designs, and enhancements to route editing capabilities. The update also addresses issues identified by user feedback and makes adjustments to default settings for DRC, ERC and other functions.
The Sysmac Studio software provides a unified design and operation environment for configuring, programming, simulating and monitoring automation systems. It supports configuration of EtherCAT networks and slave terminals, CPU/expansion racks, motion control, and programming of controllers using ladder logic, structured text and inline ST. System requirements include Windows OS, minimum memory and display specifications.
The user guide provides instructions for setting up and using the Wireless-G Access Point. It describes the physical features of the Access Point including the LED lights and ports. It also explains how to connect the Access Point to a network and set up a basic wireless network topology with multiple wireless devices connecting to the Access Point.
Thank you very much for using our Quadcept.
We wish to express our appreciation.
We are offering the new version 9.1.2 that provides new features, improvements and enhancements for a better development environment and service.
AVEVA Instrumentation is a software suite for instrumentation and control engineering that provides tools for design, documentation, and management across the entire plant lifecycle. It comprises four integrated modules for instrument engineering, design, process engineering, and wiring management. The software increases productivity through automated generation of deliverables like loop diagrams, instrument indexes, and cable schedules from a common database.
This document discusses Brückner Maschinenbau's plans to implement a new sensor data analytics system using MongoDB. It notes the large amount of sensor data collected from their packaging film production lines. It evaluates different MongoDB schema designs for storing this sensor data and concludes the bucket schema provides the best performance. The goals are to build a scalable, low-complexity system that enables real-time analytics and intelligent management of production lines. An initial proof-of-concept was successful and the next steps are further developing the user interface, software system, and analytic algorithms.
Thank you very much for using Quadcept.
We are offering the new version 9.3.0 that provides new features, improvements and enhancements for a better development environment and service.
The document provides release notes for Integr8tor version 2018.09. Key highlights include new QED features for minimum trace width, minimum critical trace width, and minimum clearance between traces. The update also allows the user to select keeping the original layer registration during job submission. Other enhancements include improved edge connector and BGA recognition, as well as various code fixes.
The C9200-48P-E is a Cisco Catalyst 9200 48-port PoE+ switch that provides up to 48 ports of full Power over Ethernet Plus capability. It offers simplicity with features like redundant power supply, fans, and modular uplinks. The switch also provides security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems. It can be managed through Cisco Software-Defined Access and Cisco DNA Center for network assurance and improved issue resolution time.
adjust.IT - Improving Spatial Accuracy through ConflationJustin Eldridge
The document describes a conflation project to improve the spatial accuracy of a utility's GIS data. It involved adjusting assets mapped in an old land base to a new, higher accuracy land base using shift models. The methodology included defining shift models, generating shift vectors, adjusting assets in job areas, delivering adjustments to production GIS in groups, and propagating jobs to alternative trees. Visual inspection and customer review were part of the QA/QC process. The approach aimed to preserve network connectivity while allowing continued work during adjustment.
This document provides a user manual for KCam CNC control software version 4.0.25. It includes sections on getting started with KCam, descriptions of the pull down menus and their functions, supported G and M codes, hardware connections, and more. The manual provides concise explanations of how to use KCam's interface elements like the plot window, gcode editor, machine setups, port setup, and jogging controls to design, view, edit and run CNC programs. It also lists file formats KCam can import and export and provides a table of contents to help users navigate the manual.
This document provides an overview and summary of Siemens S7-300 PLC programming. It covers the STEP 7 programming software, comparing CPU models and modules, addressing modules, loading memory, data types, and instructions for statement list programming, logic, math, timers, and more. Programming examples are also included at the end.
The document summarizes the key changes and new features in Version 4.40 of the CAESAR II pipe stress analysis software. Some of the main updates include revised piping codes, addition of the B31.11 code, expanded static load case options, automatic generation of hydrotest load cases, updates to the 3D graphics, and addition of new configuration options. The installation process for Version 4.40 is described, which includes running an installation driver from the included CD-ROM.
Power generation, process automation, and factory automation in manufacturing industries require rigorous, continuous monitoring in the control room. Yokogawa's DX series recorders are purpose-built data acquisition systems designed for industrial automation.
Thank you very much for using Quadcept. We are offering the new version 10.5.0 that provides new features, improvements and enhancements for a better development environment and service.
Thank you very much for using Quadcept. We are offering the new version 10.3.0 that provides new features, improvements and enhancements for a better development environment and service.
Thank you very much for using Quadcept. We are offering the new version 10.2.0 that provides new features, improvements and enhancements for a better development environment and service.
Thank you very much for using Quadcept. We are offering the new version 10.1.0 that provides new features, improvements and enhancements for a better development environment and service.
The Quadcept V10 release note summarizes new features in the software update. Key additions include:
1) Projects now use a file-based structure for less data size and smoother experience. Project data is separated from the database and managed as individual files.
2) A new "master-db" allows sharing libraries read-only across a team. Components can now be placed directly from online search results as well.
3) File locking prevents accidental editing of projects and libraries simultaneously. Project searching and maintenance tools were also enhanced.
SOCRadar's Aviation Industry Q1 Incident Report is out now!
The aviation industry has always been a prime target for cybercriminals due to its critical infrastructure and high stakes. In the first quarter of 2024, the sector faced an alarming surge in cybersecurity threats, revealing its vulnerabilities and the relentless sophistication of cyber attackers.
SOCRadar’s Aviation Industry, Quarterly Incident Report, provides an in-depth analysis of these threats, detected and examined through our extensive monitoring of hacker forums, Telegram channels, and dark web platforms.
Artificia Intellicence and XPath Extension FunctionsOctavian Nadolu
The purpose of this presentation is to provide an overview of how you can use AI from XSLT, XQuery, Schematron, or XML Refactoring operations, the potential benefits of using AI, and some of the challenges we face.
Neo4j - Product Vision and Knowledge Graphs - GraphSummit ParisNeo4j
Dr. Jesús Barrasa, Head of Solutions Architecture for EMEA, Neo4j
Découvrez les dernières innovations de Neo4j, et notamment les dernières intégrations cloud et les améliorations produits qui font de Neo4j un choix essentiel pour les développeurs qui créent des applications avec des données interconnectées et de l’IA générative.
Introducing Crescat - Event Management Software for Venues, Festivals and Eve...Crescat
Crescat is industry-trusted event management software, built by event professionals for event professionals. Founded in 2017, we have three key products tailored for the live event industry.
Crescat Event for concert promoters and event agencies. Crescat Venue for music venues, conference centers, wedding venues, concert halls and more. And Crescat Festival for festivals, conferences and complex events.
With a wide range of popular features such as event scheduling, shift management, volunteer and crew coordination, artist booking and much more, Crescat is designed for customisation and ease-of-use.
Over 125,000 events have been planned in Crescat and with hundreds of customers of all shapes and sizes, from boutique event agencies through to international concert promoters, Crescat is rigged for success. What's more, we highly value feedback from our users and we are constantly improving our software with updates, new features and improvements.
If you plan events, run a venue or produce festivals and you're looking for ways to make your life easier, then we have a solution for you. Try our software for free or schedule a no-obligation demo with one of our product specialists today at crescat.io
Flutter is a popular open source, cross-platform framework developed by Google. In this webinar we'll explore Flutter and its architecture, delve into the Flutter Embedder and Flutter’s Dart language, discover how to leverage Flutter for embedded device development, learn about Automotive Grade Linux (AGL) and its consortium and understand the rationale behind AGL's choice of Flutter for next-gen IVI systems. Don’t miss this opportunity to discover whether Flutter is right for your project.
Mobile App Development Company In Noida | Drona InfotechDrona Infotech
Looking for a reliable mobile app development company in Noida? Look no further than Drona Infotech. We specialize in creating customized apps for your business needs.
Visit Us For : https://www.dronainfotech.com/mobile-application-development/
Top Features to Include in Your Winzo Clone App for Business Growth (4).pptxrickgrimesss22
Discover the essential features to incorporate in your Winzo clone app to boost business growth, enhance user engagement, and drive revenue. Learn how to create a compelling gaming experience that stands out in the competitive market.
DDS Security Version 1.2 was adopted in 2024. This revision strengthens support for long runnings systems adding new cryptographic algorithms, certificate revocation, and hardness against DoS attacks.
Odoo ERP software
Odoo ERP software, a leading open-source software for Enterprise Resource Planning (ERP) and business management, has recently launched its latest version, Odoo 17 Community Edition. This update introduces a range of new features and enhancements designed to streamline business operations and support growth.
The Odoo Community serves as a cost-free edition within the Odoo suite of ERP systems. Tailored to accommodate the standard needs of business operations, it provides a robust platform suitable for organisations of different sizes and business sectors. Within the Odoo Community Edition, users can access a variety of essential features and services essential for managing day-to-day tasks efficiently.
This blog presents a detailed overview of the features available within the Odoo 17 Community edition, and the differences between Odoo 17 community and enterprise editions, aiming to equip you with the necessary information to make an informed decision about its suitability for your business.
Neo4j - Product Vision and Knowledge Graphs - GraphSummit ParisNeo4j
Dr. Jesús Barrasa, Head of Solutions Architecture for EMEA, Neo4j
Découvrez les dernières innovations de Neo4j, et notamment les dernières intégrations cloud et les améliorations produits qui font de Neo4j un choix essentiel pour les développeurs qui créent des applications avec des données interconnectées et de l’IA générative.
Hand Rolled Applicative User ValidationCode KataPhilip Schwarz
Could you use a simple piece of Scala validation code (granted, a very simplistic one too!) that you can rewrite, now and again, to refresh your basic understanding of Applicative operators <*>, <*, *>?
The goal is not to write perfect code showcasing validation, but rather, to provide a small, rough-and ready exercise to reinforce your muscle-memory.
Despite its grandiose-sounding title, this deck consists of just three slides showing the Scala 3 code to be rewritten whenever the details of the operators begin to fade away.
The code is my rough and ready translation of a Haskell user-validation program found in a book called Finding Success (and Failure) in Haskell - Fall in love with applicative functors.
Takashi Kobayashi and Hironori Washizaki, "SWEBOK Guide and Future of SE Education," First International Symposium on the Future of Software Engineering (FUSE), June 3-6, 2024, Okinawa, Japan
What is Augmented Reality Image Trackingpavan998932
Augmented Reality (AR) Image Tracking is a technology that enables AR applications to recognize and track images in the real world, overlaying digital content onto them. This enhances the user's interaction with their environment by providing additional information and interactive elements directly tied to physical images.
Utilocate offers a comprehensive solution for locate ticket management by automating and streamlining the entire process. By integrating with Geospatial Information Systems (GIS), it provides accurate mapping and visualization of utility locations, enhancing decision-making and reducing the risk of errors. The system's advanced data analytics tools help identify trends, predict potential issues, and optimize resource allocation, making the locate ticket management process smarter and more efficient. Additionally, automated ticket management ensures consistency and reduces human error, while real-time notifications keep all relevant personnel informed and ready to respond promptly.
The system's ability to streamline workflows and automate ticket routing significantly reduces the time taken to process each ticket, making the process faster and more efficient. Mobile access allows field technicians to update ticket information on the go, ensuring that the latest information is always available and accelerating the locate process. Overall, Utilocate not only enhances the efficiency and accuracy of locate ticket management but also improves safety by minimizing the risk of utility damage through precise and timely locates.
A Study of Variable-Role-based Feature Enrichment in Neural Models of CodeAftab Hussain
Understanding variable roles in code has been found to be helpful by students
in learning programming -- could variable roles help deep neural models in
performing coding tasks? We do an exploratory study.
- These are slides of the talk given at InteNSE'23: The 1st International Workshop on Interpretability and Robustness in Neural Software Engineering, co-located with the 45th International Conference on Software Engineering, ICSE 2023, Melbourne Australia
A Study of Variable-Role-based Feature Enrichment in Neural Models of Code
Quadcept v9.3.6 Released
1.
2. We released Quadcept v9.3.6 that includes a number of new features, enhancements and improvements.
In this document, we have highlighted some of newly added and enhanced features.
P2
Quadcept Ver9.3.6 Release Notes - New Features and Improvements -
3. Description
■ Import Gerber
Gerber files in RS-274X format can be now imported. It is useful when comparing the past design data to the current design data, or tracing data designed
in other CAD systems.
* You can import Gerber data which is based on the standard format of RS-274X. Please note that it may not be able to load depending on the file.
P1
Quadcept Ver9.3.6 Release Notes –A Feature to Import Gerber Files Now Supported -
Select Gerber Files
Select [Import Gerber] from the menu bar.
You can set the layer to import to, unit, number of
digits and zero suppression for the Gerber data.
Convert to PCB Data
4. ■With “Object Information” feature, you can check the detailed information of the selected objects.
・By selecting a route object, the detailed information such as “route length” and “the number of pins / vias connected to routes” is referable
on a “Net”, “Route” and “Between Two Points” basis.
・Currently, only route information is available.
・We plan to add referable objects by future updates.
・All the information in the “Route Info” dialog can be copied.
P2
Quadcept Ver9.3.6 Release Notes - More Detailed Route Length Information Is Now Available -
Description
More Detailed Route Length Information Is Now Available With “Object Information” Feature.
5. Description
■ Enhanced Arc Line Creation Feature
With the automatic calculation feature of the arc length, it is now possible to draw arc lines with free angles according to the bending angle.
It now makes it easier to create patterns such as antenna patterns.
P3
Quadcept Ver9.3.6 Release Notes –Enhanced Arc Line Creation Feature -
By Automatic Adjustment of Arc Length, Arc Lines Can Be Now Created More Easily and Smoothly.
6. Description
■ Enhanced Thermal Line Generation Feature
・Enhanced the thermal line generation function and added support for customized pads.
・In the [Dynamic Plane Connection] settings, you can now select “Thermal” as the connection method to customized pads.
・Thermal lines are now created at 90 or 45 degrees when the center of the pad's maximum area is in the pad.
P4
Quadcept Ver9.3.6 Release Notes –Enhanced Thermal Line Generation Feature -
Automatic Generation of Thermal Lines for Customized Pads Is Now Supported.
The [Thermal] settings has been added to "Custom" of "Connection Settings" of
the [Dynamic Plane Connection] setting in the DRC / MRC setting dialog.