The document provides release notes for Integr8tor version 2018.09. Key highlights include new QED features for minimum trace width, minimum critical trace width, and minimum clearance between traces. The update also allows the user to select keeping the original layer registration during job submission. Other enhancements include improved edge connector and BGA recognition, as well as various code fixes.
1) Nissan uses Siemens NX as its CAD standard and requires suppliers to submit 3D CAD data using a checklist system to ensure data quality.
2) NXdoctor software checks 3D CAD data within NX for errors according to Nissan's specifications. Data without errors is approved and flagged in the submission briefcase.
3) Suppliers use an NX-based toolkit provided by Nissan to prepare data submissions, which are authenticated by NXdoctor before being accepted by Nissan.
The document provides an overview of new and enhanced functionality for Dassault Systemes CATIA P3 Version 5-6 Release 2013. Key updates include improved ENOVIA-CATIA interoperability, sheet metal design, composites design, 3D functional tolerancing and annotation, and expanded data exchange interfaces. Infrastructure changes support 64-bit ENOVIA Application Server on AIX and customizing reconciliation settings.
This document lists new and enhanced functionality for Dassault Systemes CATIA Version 5 Release 21. Key additions and improvements include enhanced ENOVIA-CATIA interoperability, new data exchange interfaces for IGES 2D import, and updates to SMARTEAM CATIA integration to support migration from LUM to DSLS licensing and high secure connection mode. New functionality was also added for generative shape design, multi-axis machining, and SMARTEAM CATIA supply chain engineering exchange.
The CADISON® P&ID Designer plays a decisive role in design, construction, commissioning and maintenance and has an enormous effect on the complete lifecycle of a plant. In this case the preliminary project engineering will be integrated with Basic and Detail Engineering and 2D layout planning. Apart from the P&I diagrams the P&ID Designer even creates block flow charts and process flow diagrams (PFD).
This document provides an overview of enhancements to CATIA Solutions Version 5 Release 18. Key points include:
- Infrastructure solutions have been updated including the CATIA Infrastructure User Guide, data exchange interfaces, and integration with ENOVIA.
- Mechanical design solutions such as assembly design, sheetmetal design, and mold tooling design have been enhanced.
- Shape design and styling solutions including freeform surface modeling tools have received updates.
- Analysis and generative structural analysis capabilities have been improved.
- Equipment and systems engineering solutions for areas like electrical harness design, piping design, and plant layout have new features.
- Additional updates have been made to solutions for machining
This document provides release notes for Integr8tor v2019.07 software. Key highlights include:
- Introduction of C8Inspect, a new cloud-based service for viewing PCB data and reports.
- Enhancements to QED ring analysis to separate values by tool function.
- Code fixes to address issues with file handling, tray script execution, and job editing.
- Download available from the listed FTP site with a recommendation to install the update.
Development of Software for Estimation of Structural Dynamic Characteristics ...IRJET Journal
This document describes the development of software to estimate the structural dynamic characteristics of mechanical systems in real time. The software uses LabVIEW to analyze data from sensors measuring the response of a mechanical beam to applied forces. Signal processing methods extract parameters like resonance frequencies and damping from the sensor data. The software is also designed to provide closed-loop control to achieve a desired acceleration level at a specified point on the structure. This allows testing structural vibration within set parameters in the laboratory prior to flight.
Visualization for the Manufacturing EnterpriseGermar Nikol
Kisters 3DViewStation:
- Your data; how, when, where you want
- Making visual data available for the enterprise
- Modern software technology and robust components
- Simple to deploy & use by all users with extensibility to
- sophisticated role based behavior
- Game changing lightning speed
Why 3DViewStation?
- Breadth of data
- MultiCAD 3D, PDF , graphics
- easily handles large/complex data
- Very Very FAST
- So you can stop waiting to see your data
1) Nissan uses Siemens NX as its CAD standard and requires suppliers to submit 3D CAD data using a checklist system to ensure data quality.
2) NXdoctor software checks 3D CAD data within NX for errors according to Nissan's specifications. Data without errors is approved and flagged in the submission briefcase.
3) Suppliers use an NX-based toolkit provided by Nissan to prepare data submissions, which are authenticated by NXdoctor before being accepted by Nissan.
The document provides an overview of new and enhanced functionality for Dassault Systemes CATIA P3 Version 5-6 Release 2013. Key updates include improved ENOVIA-CATIA interoperability, sheet metal design, composites design, 3D functional tolerancing and annotation, and expanded data exchange interfaces. Infrastructure changes support 64-bit ENOVIA Application Server on AIX and customizing reconciliation settings.
This document lists new and enhanced functionality for Dassault Systemes CATIA Version 5 Release 21. Key additions and improvements include enhanced ENOVIA-CATIA interoperability, new data exchange interfaces for IGES 2D import, and updates to SMARTEAM CATIA integration to support migration from LUM to DSLS licensing and high secure connection mode. New functionality was also added for generative shape design, multi-axis machining, and SMARTEAM CATIA supply chain engineering exchange.
The CADISON® P&ID Designer plays a decisive role in design, construction, commissioning and maintenance and has an enormous effect on the complete lifecycle of a plant. In this case the preliminary project engineering will be integrated with Basic and Detail Engineering and 2D layout planning. Apart from the P&I diagrams the P&ID Designer even creates block flow charts and process flow diagrams (PFD).
This document provides an overview of enhancements to CATIA Solutions Version 5 Release 18. Key points include:
- Infrastructure solutions have been updated including the CATIA Infrastructure User Guide, data exchange interfaces, and integration with ENOVIA.
- Mechanical design solutions such as assembly design, sheetmetal design, and mold tooling design have been enhanced.
- Shape design and styling solutions including freeform surface modeling tools have received updates.
- Analysis and generative structural analysis capabilities have been improved.
- Equipment and systems engineering solutions for areas like electrical harness design, piping design, and plant layout have new features.
- Additional updates have been made to solutions for machining
This document provides release notes for Integr8tor v2019.07 software. Key highlights include:
- Introduction of C8Inspect, a new cloud-based service for viewing PCB data and reports.
- Enhancements to QED ring analysis to separate values by tool function.
- Code fixes to address issues with file handling, tray script execution, and job editing.
- Download available from the listed FTP site with a recommendation to install the update.
Development of Software for Estimation of Structural Dynamic Characteristics ...IRJET Journal
This document describes the development of software to estimate the structural dynamic characteristics of mechanical systems in real time. The software uses LabVIEW to analyze data from sensors measuring the response of a mechanical beam to applied forces. Signal processing methods extract parameters like resonance frequencies and damping from the sensor data. The software is also designed to provide closed-loop control to achieve a desired acceleration level at a specified point on the structure. This allows testing structural vibration within set parameters in the laboratory prior to flight.
Visualization for the Manufacturing EnterpriseGermar Nikol
Kisters 3DViewStation:
- Your data; how, when, where you want
- Making visual data available for the enterprise
- Modern software technology and robust components
- Simple to deploy & use by all users with extensibility to
- sophisticated role based behavior
- Game changing lightning speed
Why 3DViewStation?
- Breadth of data
- MultiCAD 3D, PDF , graphics
- easily handles large/complex data
- Very Very FAST
- So you can stop waiting to see your data
Zeal Electromech Profile with Machine Details (1).pptxAkshayThoke3
This document provides an overview of Zeal Electromech Pvt Ltd, an electronics system design and manufacturing company. It discusses the company's vision, mission, values, infrastructure including SMT lines and testing equipment, services offered, products, customers, certifications and future plans. The company aims to be a top ESDM player in India and expand its manufacturing capacity and service offerings.
The CADISON software suite provides an integrated digital plant model across the project lifecycle. Some key capabilities and modules include:
- CADISON Project-Engineer - Allows conceptual engineering and costing without CAD, including creating a plant work breakdown structure and change management.
- CADISON P&ID-Designer - Used for process and instrumentation diagram design within the CAD environment. Integrates with the project data.
- CADISON Project-Navigator - A viewing tool that provides access to all engineering data for plant operation and maintenance after handover.
- Integrated data environment - All modules use a single database so changes are reflected across the entire model, ensuring a single source of truth.
-
Design & Implementation Of Fault Identification In Underground Cables Using IOTIRJET Journal
This document describes a project to identify faults in underground cables using IoT. The system uses Ohm's law to determine the distance of a fault by measuring changes in voltage across series resistors in the cable that vary with distance. A microcontroller interfaces with an analog to digital converter to convert voltage measurements to distance readings in kilometers. When a fault occurs, the location is displayed on an LCD screen and sent over the internet via GSM to a website. The system aims to easily locate faults for repair. It was tested accurately identifying faults placed at known distances in a cable model.
CADISON celebrates its 15-year journey this year. Right from the beginning, its unique design philosophy & architecture and engineering data-driven solution approach has been a core strength. It allows seamless unification of data, objects and workflows – naturally yielding the ‘Single Version of Truth’ throughout the project life-cycle across various stakeholders of the enterprise, be it different disciplines or sites or suppliers.
The document discusses the SIMATIC S7-200 programmable logic controller (PLC) from Siemens. It describes the S7-200's positioning within Siemens' automation product line, its features including processor models and expansion modules, expandability through additional modules, communication capabilities including PROFIBUS, Ethernet, and industrial internet protocols, programming software, and provides examples of applications.
The document is a presentation by Naksha Tech Pvt. Ltd. on 3D modeling. It discusses laser scanning as a process to capture 3D surface data of objects using a laser and camera. It then outlines Naksha Tech's 3D modeling workflow including pre-processing captured point cloud data, producing 3D models, quality control checks, and output delivery in formats like AutoCAD, Revit, and Cyclone. Examples of 3D modeling projects are also shown for buildings, industrial facilities, oil and gas plants, and more.
IRJET- Multiple Load Controller for Industry using ARM CortexIRJET Journal
This document describes a multiple load controller system for industrial automation that uses an ARM cortex processor. The system allows for synchronized control and speed of multiple motors to ensure smooth automation processes. An ARM processor constantly supplies PWM signals to operate motors at desired speeds while maintaining synchronization between motors. The system was developed to address issues where synchronization errors in automation lines can damage manufacturing processes. It demonstrates synchronized movement of multiple motors and could enable fast and precise output from automation lines using large industrial motors.
The document demonstrates the capabilities of Cable Project CAD software for designing computer-aided network cabling projects by walking through creating a sample two-floor network cabling project, including importing floor plans, placing work areas and network racks, automatically routing cables between areas, and generating reports. It also shows how the design can be further modified by assigning elements in the vertical plane and customizing tagging on the page.
Power Efficient 4 Bit Flash ADC Using Cadence ToolIRJET Journal
This document describes the design and simulation of a 4-bit flash analog-to-digital converter (ADC) using Cadence tools in 180nm technology. It discusses the key components of a flash ADC including the resistor ladder, comparators, encoder, and how they are combined. Simulation results show the designed 4-bit flash ADC has a power dissipation of 2.88mW, frequency of 11MHz, and delay of 12.9ns. The flash ADC architecture is concluded to be suitable for high-speed, low-power applications.
The document summarizes a POC conducted using an Oracle Exadata X7-2 system with Oracle VM (OVM) to evaluate performance against an existing IBM P8 system. The POC involved loading an 18TB database onto different Exadata configurations with varying numbers of vCPUs. Initial loads took 48 hours on Exadata compared to over 54 hours on IBM. Exadata achieved a 2x performance increase with 36 vCPUs and low CPU usage, while IBM achieved a 4x increase but required 14 cores and setting optimizer features to an older version.
22by7 and DellEMC Tech Day July 20 2017 - Power EdgeSashikris
The document discusses Dell EMC's PowerEdge server solutions for modern data centers. It introduces the PowerEdge R940, R740-R740xd, R640, C6420, and M640-FC640 servers and highlights their key features. These include expanded processing, memory, storage and I/O capacity, intelligent automation capabilities, integrated security features, and workload optimization options. The servers are presented as providing adaptable, scalable and protected infrastructure for traditional and emerging workloads in the modern data center.
Newton Software Pvt Ltd. is a reputed name in providing Innovative software solutions for the Civil & Corporate Industry. We have earned for ourselves a rich domain experience primarily in Civil engineering & realty and the Corporate world for the Contract Labour & Visitor Management with integration of face /biometrics & allied products .
We are a team of top notch professionals who believe in continual up gradation of existing products as well as in bringing new & indigenous products into the market. Over the years , we have been able to cater to the varied needs of the Civil & Architectural & the Corporate industry
Our Products :-
1) AutoScan BOQ From Autocad Drawing
2) Auto Steel BOQ/BBS From Autocad Drawing
3) Simplify ERP
4) e-FlatDeal
5) e-Site Management
6) Estimation and Rate Analysis Software
7) PC-Architect 2D
8) Intcos-Simplifying Interior BOQ from Acad
9) E-Gatepass Contract Labour Management System
10) E-Gatepass for Builders
11) Employee Attendance system
12) Canteen Management system
The document summarizes a POC conducted using an Oracle Exadata X7-2 system with Oracle VM virtualization to evaluate its performance and licensing optimization capabilities for a customer's data warehouse migration. Key results were that the Exadata configuration with 36 vCPUs achieved a 2x faster data load speed compared to the customer's IBM system and had low CPU usage. Virtualization on Exadata also allows for improved licensing optimization compared to bare metal deployment.
Edge optimized architecture for fabric defect detection in real-timeShuquan Huang
In textile industry, fabric defect relies on human inspection traditionally, which is inaccurate, inconsistent, inefficient and expensive. There were automatic systems developed on the defect detection by identifying the faults in fabric surface using the image and video processing techniques. However, the existing solution has insufficiencies in defect data sharing, backhaul interconnect, maintenance and etc. By evolving to an edge-optimized architecture, we can help textile industry improve fabric quality, reduce operation cost and increase production efficiency. In this session, I’ll share:
What’s edge computing and why it’s important to intelligence manufacturing
What’s the characteristics, strengths and weaknesses of traditional fabric defect detection method
Why textile industry can benefit from edge computing infrastructure
How to design and implement an edge-enabled application for fabric defect detection in real-time
Insights, synergy and future research directions
The document discusses a project to implement a distributed process control system with wireless accessibility. It describes the Process Control Studio software, which allows designing and monitoring industrial processes on a laptop or PDA. The software includes features like alarming, data storage, and a mobile edition. Wireless connectivity is provided via WiFi, and an Ethernet controller allows interfacing with local measurements and controls. The controller performs data acquisition from analog and digital sensors using an ADC and can control actuators with a DAC. It also implements on-off and PID control algorithms using a microcontroller. The goal is to provide localized wireless monitoring and control of industrial processes.
CV SANDEEP_EKHE_ME_VLSI and Embedded Systems_4.9 year Exp in Embedded Firmwar...Sandeep Ekhe
The document is a cover letter and resume for Sandeep Pradeep Ekhe. It summarizes his educational qualifications including a Master's degree in VLSI and Embedded Systems and a Bachelor's degree in Electronics and Telecommunication. It outlines his work experience over 4 years and 9 months including projects in embedded software development, circuit design, and product development at various companies. It also lists his areas of expertise such as embedded C programming, microcontroller programming, communication protocols, and circuit design.
Micro e systems_mercuryii1900_datasheetElectromate
The document describes the Mercury II 1900 encoder, which provides high resolution and accuracy for position measurement. It has analog sine and cosine outputs, supports both tape and glass scales, and offers resolutions down to 1.2nm. The encoder has a small sensor size, wide operating temperature range, and high shock and vibration tolerances. Optional software is available for setup, monitoring, and diagnostics to optimize encoder performance.
IRJET- A Paper on IoT based Digital Notice Board using Arduino ATMega 328IRJET Journal
1. The document describes an IOT-based digital notice board system using an Arduino microcontroller that can display notices and announcements via a LED display board.
2. The system consists of an Arduino board connected to a GSM module to receive text messages. When a message is received, the Arduino sends it to control the LED display board. This allows notices to be sent remotely via text and displayed wirelessly.
3. The system aims to provide a low-cost electronic notice board that allows quick dissemination of notices without delays. Notices can be sent from anywhere via the mobile network connected GSM module and displayed immediately on the LED board.
So you think developing an SoC needs to be complex or expensive?Arm
This document discusses how ARM's Cortex-M0 processor and DesignStart program provide a low-cost, simplified path for developing custom system-on-chips (SoCs) for applications such as IoT, medical devices, smart lighting and more. The Cortex-M0 is ARM's smallest processor that brings 32-bit processing capabilities at a low cost point. DesignStart gives access to the Cortex-M0 processor IP as well as tools and services to prototype and produce custom SoCs. This allows startups and small companies to innovate and develop differentiated products.
[Advantech] ADAM-3600 training kit and TaglinkMing-Hung Hseih
This is training tutorial how to use Talink configure toll for IOT gateway ADAM-3600.
Agenda
- Overview of ADAM-3600 &Demo Box Hands-On
- First Step -Build Up Your Own iRTUSystem
- Methods for Trouble Shooting
- Connecting the Dots –Upper Link Setting
Logic Building –Using SoftLogicfor Complex Logic (Demo)
Zeal Electromech Profile with Machine Details (1).pptxAkshayThoke3
This document provides an overview of Zeal Electromech Pvt Ltd, an electronics system design and manufacturing company. It discusses the company's vision, mission, values, infrastructure including SMT lines and testing equipment, services offered, products, customers, certifications and future plans. The company aims to be a top ESDM player in India and expand its manufacturing capacity and service offerings.
The CADISON software suite provides an integrated digital plant model across the project lifecycle. Some key capabilities and modules include:
- CADISON Project-Engineer - Allows conceptual engineering and costing without CAD, including creating a plant work breakdown structure and change management.
- CADISON P&ID-Designer - Used for process and instrumentation diagram design within the CAD environment. Integrates with the project data.
- CADISON Project-Navigator - A viewing tool that provides access to all engineering data for plant operation and maintenance after handover.
- Integrated data environment - All modules use a single database so changes are reflected across the entire model, ensuring a single source of truth.
-
Design & Implementation Of Fault Identification In Underground Cables Using IOTIRJET Journal
This document describes a project to identify faults in underground cables using IoT. The system uses Ohm's law to determine the distance of a fault by measuring changes in voltage across series resistors in the cable that vary with distance. A microcontroller interfaces with an analog to digital converter to convert voltage measurements to distance readings in kilometers. When a fault occurs, the location is displayed on an LCD screen and sent over the internet via GSM to a website. The system aims to easily locate faults for repair. It was tested accurately identifying faults placed at known distances in a cable model.
CADISON celebrates its 15-year journey this year. Right from the beginning, its unique design philosophy & architecture and engineering data-driven solution approach has been a core strength. It allows seamless unification of data, objects and workflows – naturally yielding the ‘Single Version of Truth’ throughout the project life-cycle across various stakeholders of the enterprise, be it different disciplines or sites or suppliers.
The document discusses the SIMATIC S7-200 programmable logic controller (PLC) from Siemens. It describes the S7-200's positioning within Siemens' automation product line, its features including processor models and expansion modules, expandability through additional modules, communication capabilities including PROFIBUS, Ethernet, and industrial internet protocols, programming software, and provides examples of applications.
The document is a presentation by Naksha Tech Pvt. Ltd. on 3D modeling. It discusses laser scanning as a process to capture 3D surface data of objects using a laser and camera. It then outlines Naksha Tech's 3D modeling workflow including pre-processing captured point cloud data, producing 3D models, quality control checks, and output delivery in formats like AutoCAD, Revit, and Cyclone. Examples of 3D modeling projects are also shown for buildings, industrial facilities, oil and gas plants, and more.
IRJET- Multiple Load Controller for Industry using ARM CortexIRJET Journal
This document describes a multiple load controller system for industrial automation that uses an ARM cortex processor. The system allows for synchronized control and speed of multiple motors to ensure smooth automation processes. An ARM processor constantly supplies PWM signals to operate motors at desired speeds while maintaining synchronization between motors. The system was developed to address issues where synchronization errors in automation lines can damage manufacturing processes. It demonstrates synchronized movement of multiple motors and could enable fast and precise output from automation lines using large industrial motors.
The document demonstrates the capabilities of Cable Project CAD software for designing computer-aided network cabling projects by walking through creating a sample two-floor network cabling project, including importing floor plans, placing work areas and network racks, automatically routing cables between areas, and generating reports. It also shows how the design can be further modified by assigning elements in the vertical plane and customizing tagging on the page.
Power Efficient 4 Bit Flash ADC Using Cadence ToolIRJET Journal
This document describes the design and simulation of a 4-bit flash analog-to-digital converter (ADC) using Cadence tools in 180nm technology. It discusses the key components of a flash ADC including the resistor ladder, comparators, encoder, and how they are combined. Simulation results show the designed 4-bit flash ADC has a power dissipation of 2.88mW, frequency of 11MHz, and delay of 12.9ns. The flash ADC architecture is concluded to be suitable for high-speed, low-power applications.
The document summarizes a POC conducted using an Oracle Exadata X7-2 system with Oracle VM (OVM) to evaluate performance against an existing IBM P8 system. The POC involved loading an 18TB database onto different Exadata configurations with varying numbers of vCPUs. Initial loads took 48 hours on Exadata compared to over 54 hours on IBM. Exadata achieved a 2x performance increase with 36 vCPUs and low CPU usage, while IBM achieved a 4x increase but required 14 cores and setting optimizer features to an older version.
22by7 and DellEMC Tech Day July 20 2017 - Power EdgeSashikris
The document discusses Dell EMC's PowerEdge server solutions for modern data centers. It introduces the PowerEdge R940, R740-R740xd, R640, C6420, and M640-FC640 servers and highlights their key features. These include expanded processing, memory, storage and I/O capacity, intelligent automation capabilities, integrated security features, and workload optimization options. The servers are presented as providing adaptable, scalable and protected infrastructure for traditional and emerging workloads in the modern data center.
Newton Software Pvt Ltd. is a reputed name in providing Innovative software solutions for the Civil & Corporate Industry. We have earned for ourselves a rich domain experience primarily in Civil engineering & realty and the Corporate world for the Contract Labour & Visitor Management with integration of face /biometrics & allied products .
We are a team of top notch professionals who believe in continual up gradation of existing products as well as in bringing new & indigenous products into the market. Over the years , we have been able to cater to the varied needs of the Civil & Architectural & the Corporate industry
Our Products :-
1) AutoScan BOQ From Autocad Drawing
2) Auto Steel BOQ/BBS From Autocad Drawing
3) Simplify ERP
4) e-FlatDeal
5) e-Site Management
6) Estimation and Rate Analysis Software
7) PC-Architect 2D
8) Intcos-Simplifying Interior BOQ from Acad
9) E-Gatepass Contract Labour Management System
10) E-Gatepass for Builders
11) Employee Attendance system
12) Canteen Management system
The document summarizes a POC conducted using an Oracle Exadata X7-2 system with Oracle VM virtualization to evaluate its performance and licensing optimization capabilities for a customer's data warehouse migration. Key results were that the Exadata configuration with 36 vCPUs achieved a 2x faster data load speed compared to the customer's IBM system and had low CPU usage. Virtualization on Exadata also allows for improved licensing optimization compared to bare metal deployment.
Edge optimized architecture for fabric defect detection in real-timeShuquan Huang
In textile industry, fabric defect relies on human inspection traditionally, which is inaccurate, inconsistent, inefficient and expensive. There were automatic systems developed on the defect detection by identifying the faults in fabric surface using the image and video processing techniques. However, the existing solution has insufficiencies in defect data sharing, backhaul interconnect, maintenance and etc. By evolving to an edge-optimized architecture, we can help textile industry improve fabric quality, reduce operation cost and increase production efficiency. In this session, I’ll share:
What’s edge computing and why it’s important to intelligence manufacturing
What’s the characteristics, strengths and weaknesses of traditional fabric defect detection method
Why textile industry can benefit from edge computing infrastructure
How to design and implement an edge-enabled application for fabric defect detection in real-time
Insights, synergy and future research directions
The document discusses a project to implement a distributed process control system with wireless accessibility. It describes the Process Control Studio software, which allows designing and monitoring industrial processes on a laptop or PDA. The software includes features like alarming, data storage, and a mobile edition. Wireless connectivity is provided via WiFi, and an Ethernet controller allows interfacing with local measurements and controls. The controller performs data acquisition from analog and digital sensors using an ADC and can control actuators with a DAC. It also implements on-off and PID control algorithms using a microcontroller. The goal is to provide localized wireless monitoring and control of industrial processes.
CV SANDEEP_EKHE_ME_VLSI and Embedded Systems_4.9 year Exp in Embedded Firmwar...Sandeep Ekhe
The document is a cover letter and resume for Sandeep Pradeep Ekhe. It summarizes his educational qualifications including a Master's degree in VLSI and Embedded Systems and a Bachelor's degree in Electronics and Telecommunication. It outlines his work experience over 4 years and 9 months including projects in embedded software development, circuit design, and product development at various companies. It also lists his areas of expertise such as embedded C programming, microcontroller programming, communication protocols, and circuit design.
Micro e systems_mercuryii1900_datasheetElectromate
The document describes the Mercury II 1900 encoder, which provides high resolution and accuracy for position measurement. It has analog sine and cosine outputs, supports both tape and glass scales, and offers resolutions down to 1.2nm. The encoder has a small sensor size, wide operating temperature range, and high shock and vibration tolerances. Optional software is available for setup, monitoring, and diagnostics to optimize encoder performance.
IRJET- A Paper on IoT based Digital Notice Board using Arduino ATMega 328IRJET Journal
1. The document describes an IOT-based digital notice board system using an Arduino microcontroller that can display notices and announcements via a LED display board.
2. The system consists of an Arduino board connected to a GSM module to receive text messages. When a message is received, the Arduino sends it to control the LED display board. This allows notices to be sent remotely via text and displayed wirelessly.
3. The system aims to provide a low-cost electronic notice board that allows quick dissemination of notices without delays. Notices can be sent from anywhere via the mobile network connected GSM module and displayed immediately on the LED board.
So you think developing an SoC needs to be complex or expensive?Arm
This document discusses how ARM's Cortex-M0 processor and DesignStart program provide a low-cost, simplified path for developing custom system-on-chips (SoCs) for applications such as IoT, medical devices, smart lighting and more. The Cortex-M0 is ARM's smallest processor that brings 32-bit processing capabilities at a low cost point. DesignStart gives access to the Cortex-M0 processor IP as well as tools and services to prototype and produce custom SoCs. This allows startups and small companies to innovate and develop differentiated products.
[Advantech] ADAM-3600 training kit and TaglinkMing-Hung Hseih
This is training tutorial how to use Talink configure toll for IOT gateway ADAM-3600.
Agenda
- Overview of ADAM-3600 &Demo Box Hands-On
- First Step -Build Up Your Own iRTUSystem
- Methods for Trouble Shooting
- Connecting the Dots –Upper Link Setting
Logic Building –Using SoftLogicfor Complex Logic (Demo)
Similar to Integr8tor v2018.09 Release Notes - English (20)
The document describes release notes for Integr8tor v2019.03. Key highlights include new measurement functionality and freely displayable layers in Checkpoint, extended import and export support for advanced ODB++ features, and various code fixes. The timeline shows Integr8tor versions released since 2010 with v2019.03 being the most recent in March 2019.
YELO is a tool set for automated and operator-assisted PCB layout optimization. It aims to support both the quotation stage and CAM. YELO plugs into UcamX and Integr8tor for a highly automated, integrated workflow. It consists of modular tools to optimize signal, plane, and legend layers for increased yield by enforcing design rules and repairing issues like small clearances automatically. YELO documents corrections and issues to facilitate customer communication and approval.
5th LF Energy Power Grid Model Meet-up SlidesDanBrown980551
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor IvaniukFwdays
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
"Choosing proper type of scaling", Olena SyrotaFwdays
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.
AppSec PNW: Android and iOS Application Security with MobSFAjin Abraham
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...Jason Yip
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectorsDianaGray10
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfChart Kalyan
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Main news related to the CCS TSI 2023 (2023/1695)Jakub Marek
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
3. Serving our customer base with regular updates
Version Release date Highlights
7.1 Jun-12 Localized interface. Line width on planes.
7.1.3 Jul-12 Bug fix release for ‘recovered job’.
8.1 May-13 Support for ODB++ v7. Compatible withWindows server 2012 and windows 8.
8.2 Nov-13 Detection and flagging of duplicate archives. Edge connector recognition.
8.3 Jun-14 New standard parameters. Determination of laser/mechanical drilling.
9.1 Dec-14 Support for GerberX2 datasets. Optimized and new QED values.
2015.05 Jun-15 New standard parameters. Determination of laser/mechanical drilling.
2016.04 Apr-16 SMD/BGA pads differentiates copper- and solder mask defined DFM Checks (former Capabilities) revised
2016.12 Dec-16 Introducing Integr8tor Job Perspectives Drill hole tolerances
2017.05 May-17 Support for PCB Surface finish Same-sized jobs detection
2017.12 Dec-17 Checkpoint review extensions for various QED results Analysis of via holes with different solder mask openings top/bottom
2018.09 Sep-18 NewQED feature: Minimum CriticalTraceWidth User-selectable layer registration
Integr8tor v2018.09
Today
2010 2011 2012 2013 2014 2015 2016 2017 2018
Integr8tor v5.1
Jun 2010
Integr8tor v5.2
Nov 2010
Integr8tor v6.1
Mar 2011
Integr8tor v6.2
Oct 2011
Integr8tor v7.1
Jun 2012
Integr8tor v7.1.3
Jul 2012
Integr8tor v8.1
May 2013
Integr8tor v8.2
Nov 2013
Integr8tor v8.3
Jun 2014
Integr8tor v9.1
Dec 2014
Integr8tor v2015.05
May 2015
Integr8tor v2016.04
Apr 2016
Integr8tor v2016.12
Dec 2016
Integr8tor v2017.05
May 2017
Integr8tor v2017.12
Dec 2017
Integr8tor
v2018.09
Sep 2018
4. Integr8tor v2018.09
New features - Overview
New QED features
o MinimumTraceWidth
o MinimumCriticalTraceWidth
o MinimumClearanceTrace toTrace
available on QED PDF, QED XML and Checkpoint review
New Job Submit option: Keep original registration
Zero size apertures display on PDF report images
UTF-8 support for new Integr8tor installations
5. Integr8tor v2018.09
Enhancements - Overview
Min. Same Net Spacing extensions
Extended Edge Connector information
BGA recognition enhancements
Extensions to the QED PDF Routed Holes section
Added routing info to QED.XML
Added base material thickness from Ustack to QED stack-up image
Min. copper width now available in DFM Classes and DFM review
Drill format recognition improvements
Stackup recognition improvements
6. Integr8tor v2018.09
Enhancements - Overview
Gerber X2 data flow enhancements:
o Automatically switch off layer alignment if permitted
o Active usage of .FileFunction “Profile” attribute in outline
determination process
Various industrializations:
o More intuitive and logical QED PDF report structure
o Smoothened installation of the local Checkpoint client
Various additions to Job Flow Control
o Netcompare added to theWork-Up stage
o Creation of the ‘realTray’ variable for better flow control in custom
scripts
7. Integr8tor v2018.09
Code fixes
We are very grateful to our customer base for reporting any software
malfunctions or inconsistencies that may have slipped through the nets
of our quality control…
In line with tradition, this v2018.09 update incorporated a series of fixes
for issues you have cared to flag – details in the last section of these
release notes
Thank you for helping us make an excellent product even better…
9. New QED features MinimumTraceWidth
Minimum CriticalTrace width
Find out about the smallest trace width in the blink of an eye
Trace width is a very important quotation parameter
Trace widths problems are usually much harder to fix in CAM than
copper width problems in regions
Increasing trace widths tends to be less accepted by end users and
requires intensive documentation and validation cycles
Plating, etching and quality control departments require
minimum trace width locations on the board to check their
processes
Knowing about the exact minimum trace width is
of paramount importance…
Integr8tor v2018.09
New features – Minimum (Critical)TraceWidth
10. Earlier Integr8tor versions reported Min. CopperWidth and Min. Line
Width
Line widths were electrically significant copper widths, regardless of
the construction (contour, painted, pos/neg,…)
Integr8tor v2018.09 introduces the concept ofTrace Width
Trace widths are copper widths that are made using a single draw with
a positive aperture (no contour, no painted, no pos/neg,…)
If aTrace width is electrically critical, it is reported as
Min. CriticalTraceWidth – if not, it is listed as Min.Trace width
Min. Copper width continues to exist
Min. Line Width has been renamed to Min. Critical CopperWidth for
consistency
Integr8tor v2018.09
New features – Minimum (Critical)TraceWidth
11. Integr8tor v2018.09
New features – Minimum (Critical)TraceWidth – QED PDF
Pre-v2018.09:
v2018.09:
NEW
Electrically critical
Image, critical or not
12. Integr8tor v2018.09
New features – Minimum (Critical)TraceWidth – QED XML
In QED XML
MinTrackAllCopper = Min. copper width
MinTrack = Min. critical copper width
MinTrackAllTrace = Min. trace width
MinTrackCriticalTrace = Min. critical trace width
13. Integr8tor v2018.09
New features – Minimum (Critical) CopperWidth – Checkpoint Review
Min. critical copper width
Electrically critical – if connection breaks,
netlist/electrical function changes
Construction = contour/painted
Min. copper width
Not electrically critical – if connection breaks,
netlist/electrical function remains intact
Construction = contour/painted
14. Integr8tor v2018.09
New features – Minimum CriticalTraceWidth – Checkpoint Review
Min. critical trace width
Electrically critical – if connection
breaks, netlist/electrical function
changes
Construction = single draw with a
circle aperture
And remember
All trace widths are
also copper widths…
But not all copper
widths are trace
widths
15. New QED feature – Min. ClearanceTrace toTrace
The closest distance between any two traces
Min.Trace toTrace info is a key parameter for
assessing the manufacturability of a board and
hence crucial for accurate quoting
Etching, plating and QC departments are helped
enormously with accurate location info on critical
trace clearances
Establishing what the minimum clearance
between 2 traces on a board is, is essential for
both quoting and manufacturing…
Integr8tor v2018.09
New features – Minimum ClearanceTrace toTrace
16. Available on QED PDF, both on a per-copper layer
basis as well as in the consolidated summary section
Available in Checkpoint Review as a separate check
Available in QED XML
Integr8tor v2018.09
New features – Minimum ClearanceTrace toTrace
17. Run-time option to switch layer
registration on/off during job submit
Speed up data input by switching
off layer registration when you
know the layers are already
registered
Easy workaround when the
registration process upsets an
already registered job.This may
happen with highly symmetrical
or low-info boards.
Switched off automatically on
Gerber X2 files with the
attribute:
Integr8tor v2018.09
New features - Job submit option “Keep original registration”
18. New features - Zero size apertures display on PDF report images
Visualization of Gerber zero-sized data on the QED
PDF report
Items that are not part of the physical PCB like an
outline or registration targets sometimes are
drawn with an “invisible” pen (an aperture of size 0)
Even entire layers like drill drawings have been
known to be “hidden” in that way…
This may make you miss important manufacturing
information like tolerance values on drill holes…
V2018.09 makes this information visible and places
it on its PDF drawings fully automatically
Never miss a single instruction or important detail
again, even if it has been drawn with a non-visible,
zero-sized circle aperture in a Gerber layer…
Integr8tor v2018.09
19. UTF-8 support throughout the entire Integr8tor
workflow
Provide your customers with professional-looking QED
material with correct use of diacritical marks and make
a first-class impression on your Central European, Baltic
or Far-East customer base
Smoothen communication and avoid
misunderstandings or questions back, due to
incomplete or incomprehensible customer names,
contact names, article references, Email addresses, …
Integr8tor v2018.09
New features – UTF-8 support for new Integr8tor installations
21. Upgrade of the Min. Same Net spacing information on the
QED PDF report
Same Net Spacing minimum values are amongst the
most critical parameters, not only for quoting but
even more so for fabrication
Overlooking a critical Min. Same Net Spacing value
may lead to incorrect production setup or worse, to
costly production scrap…
V2018.09 makes Min. Same Net Spacing values
eminently visible in the Summary section of the QED
PDF, along with all other vital product parameters
Min. Same Net Spacing now features a link to a
detailed image with valuable location information on
the board
Checkpoint supports Min. Same Net Spacing in case
further references are needed
Integr8tor v2018.09
Enhancements – Min. Same Net Spacing
23. Integr8tor v2018.09
Enhancements – Extended Edge Connector information
Edge connectors are an important cost driver, particularly when
they require an expensive surface finish
Integr8tor’s Edge Connector analysis has been extended to
provide additional information including:
o The number of edge connector fingers
o The largest edge connector finger in the collection
o The surface of the edge connector fingers
Listed for top, bottom and as job grand total
24. Integr8tor v2018.09
Enhancements – BGA recognition enhancements
Integr8tor’s intelligent BGA recognizer now
supports fully drilled BGAs
A vast arsenal of thousands of BGA
components now picked up and
recognized fully automatically
Provide your Sales with accurate
quoting information and cut out the
element of surprise for your CAM
department
25. Integr8tor v2018.09
Enhancements – Rout/Nibble extended information
Nibbling/routing of a large number of slots can jeopardize the
throughput in the drill/rout department.
Underestimating this aspect of production may end up
upsetting delivery times as well as customer relationships…
New handy summary line in the QED PDF Routed Holes
section makes the board totals readily available with full
details on
o the total amount of slots
o the cumulated slot length
o the total number of expected nibble hits
26. Integr8tor v2018.09
Enhancements – Rout/Nibble extended information
The sections Routing tools and Routed holes have been added
to QED XML for fully automatic processing of all rout/nibble
related board information
27. Integr8tor v2018.09
Enhancements – Material base thickness in stack-up image
The correct choice of materials and thickness is essential in
achieving the finished board specification
Extra material base thickness info facilitates easy
cross-checking between Ustack-based material
information and customer requirements
Reduces the risk of costly, inadvertent material mix-up
28. DFM Classes/Review(*) are extremely handy tools to fit
incoming designs into manufacturability classes automatically
Min. copper width is a common criterium that pushes designs
from one class to the next
DFM easily accesses any copper width analysis result and
takes it into account to help establish the appropriate
manufacturing class
Integr8tor v2018.09
Enhancements – Min. copper width for DFM Classes/Review
* licensed Integr8tor option
29. Correct automatic stack-up is the cornerstone of an
accurate analysis and speedy results
Drill format recognition and correct span definition play
an equally important role in this automated process
V2018.09 comes with the largest Integr8tor
knowledge base so far to help you achieve the
highest possible percentage of fully automatic
stack-up assignments and drill file format
recognitions
Installs and loads automatically after software
installation and server startup…
Integr8tor v2018.09
Enhancements – Improved drill format and stack-up recognition
30. The richness of the Gerber X2 format automates the quotation,
engineering and pre-CAM processes to the full, with more jobs
running from start to finish without interruption
Integr8tor now offers these fine new benefits on X2 jobs…
Layer registration
Gerber X2 files can state that they are in register with each other using
the File Attribute
If this info is available, V2018.09 will skip layer registration during
input, bringing faster and more accurate results
Outline detection
Gerber X2 files can express their function within the stack-up using the
File Attribute
V2018.09 actively uses layers with a .FileFunction “Profile” in the
outline determination process
Integr8tor v2018.09
Enhancements – Gerber X2 data flow extensions
31. More intuitive and logical QED PDF report structure
Accurate information, the way you expect it,
in the place you expect it…
Have a closer look at the reworked sections…
o Summary – General
o Summary – Copper layers
o Summary Minimum Design
Characteristics – Locations
o Routed Holes
o Copper Areas
o …
Integr8tor v2018.09
Enhancements –Various industrializations
32. Smoothened installation of local Checkpoint clients
Local Checkpoint clients require local license file information and
environment variable setup at the time of installation
V2018.09 looks after this for you for a hassle-free installation and
minimal disruption
Integr8tor v2018.09
Enhancements –Various industrializations
33. Job Flow Control* is Integr8tor’s powerful programming and scripting tool
to set up alternative routes and automatically steer jobs through them
Job Flow Control is used to achieve full automation or to serve as the
backbone for an interactive quotation web site
For better flow control the following additions have been made:
Netcompare functionality has been added to theWork-Up stage
A new ‘realTray’ variable indicates the real tray behind common/virtual TWU
Integr8tor v2018.09
Enhancements – Job Flow Control Extensions
* licensed Integr8tor option
35. Integr8tor v2018.09
We have taken great care in fixing the items below for you and hope this will
contribute to an even better user experience…
Copper width could be incorrect in case of multiple solder masks per side
Ambiguous contours sometimes were generated in the clean job output
Open job from Integr8tor could fail if afjobqueue_custom_table is not present
PDF files containing attachments were listed twice in the file list section in cockpit
The list of possible import formats offered during job submit contained formats for which
the license had already expired, causing “no license” workflow interruptions
The presence of an extremely high number of tiny isolated draws with only a few microns
in diameter could cause jobs to fail during PDF image generation
Code fixes
36. Integr8tor v2018.09
A layer subclass set manually in Job Editor after a Ustack session did not
always find its way into the clean job when a layer rename script was used
Under circumstances, the shipping panel image generated on the PDF report
did not match the operator’s choice made in Panel Optimizer result.
The presence of blind/buried drill spans had the potential to upset the correct
order of the Summary Sequence Section on the QED PDF report
Some PDF report fields were not correctly updated when moving a job between
2 passive trays
Code fixes
37. Integr8tor v2018.09
• The installer can be downloaded from
ftp://ftp.ucamco.com/Integr8tor
• We recommend that you install this update at your earliest
convenience
• For any further questions you may have, please contact our
local business partner or the Ucamco helpdesk
• We thank you for choosing a Ucamco product
General information