The document provides biographical information about two speakers for an upcoming seminar on publishing in high-quality journals:
1) Alvin K. Mulashani, who has degrees in oil and natural gas engineering from XSYU and CUG and works in the School of Earth Resources at Wuhan University.
2) Ibrahim AL-Wesabi, who has degrees in artificial intelligence from SU and CUG and is pursuing a PhD in artificial intelligence and optimization algorithms for renewable energy resources at Wuhan University.
The seminar will be held on September 22nd at the Silk Road Institute campus and discuss topics such as introducing artificial intelligence and bioinspired algorithms, using AI in renewable energy, publishing background,
This document provides guidance for postgraduate students on publishing in high impact journals. It discusses the importance of publication and different publication types like journal papers and proceedings papers. It outlines key criteria for writing quality scholarly papers, including structure, language, and originality. The document also reviews the general peer review process, including common reviewer verdicts, perspectives of editors and reviewers, and steps to take if a paper is rejected. The goal is to help students successfully publish their work in high impact journals.
The document provides 10 steps for organizing a research paper, including preparing figures and tables, writing the methods, results and discussion, conclusion, introduction, abstract, title, keywords, acknowledgements, and references. It emphasizes writing sections in a logical order and producing a clear, well-structured paper. The document also discusses the role and value of open access journals in disseminating research and advancing fields like biosensors and bioelectronics.
This document provides guidance on publishing research results in technical periodicals and conferences. It discusses conducting a thorough literature review to demonstrate how the research contributes new knowledge. Authors must follow ethical standards, including properly attributing sources to avoid plagiarism. The document reviews responsibilities of authors and outlines the process of writing and submitting manuscripts, including developing an outline, writing drafts, peer review, and final publication. Following these steps will help authors successfully share their work and advance their field.
This document discusses key aspects of the scientific research process and publishing findings, including:
1) The typical phases of the scientific method such as developing a research question, conducting background research, forming a hypothesis, designing and conducting experiments, analyzing results, and publishing findings.
2) Guidelines for publishing research including selecting appropriate publication venues based on their prestige, impact factor, and indexing in databases. Conferences, journals, books, and dissertation are discussed as common publication types.
3) Metrics for measuring research impact including the number of citations, journal impact factor, and h-index which provides an indicator of productivity and citation impact. Resources for identifying publications and metrics like Web of Science, DBLP, and Google
Workshop IEEE na USP – Como aumentar o impacto de suas pesquisas e publicaçõesSIBiUSP
Workshop IEEE na USP – Como aumentar o impacto de suas pesquisas e publicações foi realizado dia 05 de junho de 2018 na no Auditório da Engenharia Elétrica da Escola Politécnica da USP. O evento foi promovido pelo Sistema Integrado de Bibliotecas da USP - SIBiUSP, a Divisão de Biblioteca da Escola Politécnica da USP e a Biblioteca do IME USP em parceria com a EBSCO e teve como objetivo apresentar dicas sobre como publicar com o IEEE para aumentar a visibilidade, a atividade de pesquisa e a reputação dos pesquisadores em nível internacional. Ministrante: Paul Canning.
How to write a Scientific Manuscript – Pubrica.pptxPubrica
Writing a scientific manuscript is difficult for even the brightest minds, but it is highly satisfying once the project is completed. Researchers meticulously create manuscripts to share their original ideas and fresh discoveries with the scientific community and the general public.
Learn More : https://bit.ly/3ioFNT1
Reference: https://pubrica.com/
Why Pubrica:
When you order our services, we promise you the following – Plagiarism free | always on Time | 24*7 customer support | Written to international Standard | Unlimited Revisions support | Medical writing Expert | Publication Support | Bio statistical experts | High-quality Subject Matter Experts.
Contact us:
Web: https://pubrica.com/
Blog: https://pubrica.com/academy/
Email: sales@pubrica.com
WhatsApp : +91 9884350006
United Kingdom: +44-1618186353
This document provides tips and strategies for effectively reading academic papers. It discusses deciding what papers to read based on relevance and credibility. It recommends making best use of academic resources like preprint sites, blogs, and mailing lists to stay updated. It explains the importance of reading for breadth to understand the big picture and reading for depth to critically examine assumptions, methods, statistics and conclusions. The document concludes by discussing how to take notes and think creatively after reading papers to develop new research ideas.
This document provides guidance on scientific writing and publishing papers in journals. It discusses the main steps in the publishing process from conducting research to writing drafts and revising papers. It emphasizes that publishing research is important to advancing scientific knowledge. It also addresses choosing appropriate journals, writing different sections of a paper, bibliometric indicators for measuring journal impact, and ethics in scientific writing.
This document provides guidance for postgraduate students on publishing in high impact journals. It discusses the importance of publication and different publication types like journal papers and proceedings papers. It outlines key criteria for writing quality scholarly papers, including structure, language, and originality. The document also reviews the general peer review process, including common reviewer verdicts, perspectives of editors and reviewers, and steps to take if a paper is rejected. The goal is to help students successfully publish their work in high impact journals.
The document provides 10 steps for organizing a research paper, including preparing figures and tables, writing the methods, results and discussion, conclusion, introduction, abstract, title, keywords, acknowledgements, and references. It emphasizes writing sections in a logical order and producing a clear, well-structured paper. The document also discusses the role and value of open access journals in disseminating research and advancing fields like biosensors and bioelectronics.
This document provides guidance on publishing research results in technical periodicals and conferences. It discusses conducting a thorough literature review to demonstrate how the research contributes new knowledge. Authors must follow ethical standards, including properly attributing sources to avoid plagiarism. The document reviews responsibilities of authors and outlines the process of writing and submitting manuscripts, including developing an outline, writing drafts, peer review, and final publication. Following these steps will help authors successfully share their work and advance their field.
This document discusses key aspects of the scientific research process and publishing findings, including:
1) The typical phases of the scientific method such as developing a research question, conducting background research, forming a hypothesis, designing and conducting experiments, analyzing results, and publishing findings.
2) Guidelines for publishing research including selecting appropriate publication venues based on their prestige, impact factor, and indexing in databases. Conferences, journals, books, and dissertation are discussed as common publication types.
3) Metrics for measuring research impact including the number of citations, journal impact factor, and h-index which provides an indicator of productivity and citation impact. Resources for identifying publications and metrics like Web of Science, DBLP, and Google
Workshop IEEE na USP – Como aumentar o impacto de suas pesquisas e publicaçõesSIBiUSP
Workshop IEEE na USP – Como aumentar o impacto de suas pesquisas e publicações foi realizado dia 05 de junho de 2018 na no Auditório da Engenharia Elétrica da Escola Politécnica da USP. O evento foi promovido pelo Sistema Integrado de Bibliotecas da USP - SIBiUSP, a Divisão de Biblioteca da Escola Politécnica da USP e a Biblioteca do IME USP em parceria com a EBSCO e teve como objetivo apresentar dicas sobre como publicar com o IEEE para aumentar a visibilidade, a atividade de pesquisa e a reputação dos pesquisadores em nível internacional. Ministrante: Paul Canning.
How to write a Scientific Manuscript – Pubrica.pptxPubrica
Writing a scientific manuscript is difficult for even the brightest minds, but it is highly satisfying once the project is completed. Researchers meticulously create manuscripts to share their original ideas and fresh discoveries with the scientific community and the general public.
Learn More : https://bit.ly/3ioFNT1
Reference: https://pubrica.com/
Why Pubrica:
When you order our services, we promise you the following – Plagiarism free | always on Time | 24*7 customer support | Written to international Standard | Unlimited Revisions support | Medical writing Expert | Publication Support | Bio statistical experts | High-quality Subject Matter Experts.
Contact us:
Web: https://pubrica.com/
Blog: https://pubrica.com/academy/
Email: sales@pubrica.com
WhatsApp : +91 9884350006
United Kingdom: +44-1618186353
This document provides tips and strategies for effectively reading academic papers. It discusses deciding what papers to read based on relevance and credibility. It recommends making best use of academic resources like preprint sites, blogs, and mailing lists to stay updated. It explains the importance of reading for breadth to understand the big picture and reading for depth to critically examine assumptions, methods, statistics and conclusions. The document concludes by discussing how to take notes and think creatively after reading papers to develop new research ideas.
This document provides guidance on scientific writing and publishing papers in journals. It discusses the main steps in the publishing process from conducting research to writing drafts and revising papers. It emphasizes that publishing research is important to advancing scientific knowledge. It also addresses choosing appropriate journals, writing different sections of a paper, bibliometric indicators for measuring journal impact, and ethics in scientific writing.
Technical writing involves publishing research results in journals to advance the field and receive credit. The process begins with experiments, literature review to identify gaps, and developing a manuscript with an introduction, methods, results and discussion. Key questions to consider are whether the research significantly advances knowledge and is interesting to peers. Thoroughly reviewing previous work and selecting the appropriate journal helps get published. References and citations must properly attribute prior work to avoid plagiarism.
The document provides an overview of the research methodology process for science and technology. It defines research and notes that research involves systematically collecting and analyzing data to increase understanding, interpreting data to draw conclusions, and building on past research rather than just restating facts. The document outlines Wallace's model for the research process and discusses key stages including proposing a research topic after reviewing literature, conducting the research, and documenting the work through publications like conference and journal papers. It also provides guidance on components of documentation like the research proposal, thesis, scientific writing format IMRAD, and considerations for publication.
How to write a Scientific Manuscript – Pubrica.pdfPubrica
Writing a scientific manuscript is difficult for even the brightest minds, but it is highly satisfying once the project is completed. Researchers meticulously create manuscripts to share their original ideas and fresh discoveries with the scientific community and the general public.
Learn More : https://bit.ly/3ioFNT1
Reference: https://pubrica.com/
Why Pubrica:
When you order our services, we promise you the following – Plagiarism free | always on Time | 24*7 customer support | Written to international Standard | Unlimited Revisions support | Medical writing Expert | Publication Support | Bio statistical experts | High-quality Subject Matter Experts.
Contact us:
Web: https://pubrica.com/
Blog: https://pubrica.com/academy/
Email: sales@pubrica.com
WhatsApp : +91 9884350006
United Kingdom: +44-1618186353
An overview of publishing trends in materials science with advice from Dave Flanagan, the Editor-in-Chief of Advanced Functional Materials on getting your best results published in top journals.
I recently gave this talk at the Sino-US Nanomeeting at the University of Science and Technology (USTC), Hefei, China and at a number of universities that I had the opportunity to visit.
Questions and comments are welcome in the discussion below.
The document provides guidance on how to write and publish a world-class paper. It discusses selecting the right audience and journal, the peer-review process, metrics for comparing journals, and tips for conducting effective literature searches and developing a strong manuscript. Key points include identifying a novel, clear message; choosing the journal based on the intended audience and level of interest; and defining the contribution to advance scientific understanding.
Publishing in high impact factor journals - Universiti Putra MalaysiaMohamed Alrshah
This workshop has been organized by the Network, Parallel and Distributed Computing Research Group at the Department of Communication Technology and Networks at Universiti Putra Malaysia. The audience was 40 people from academic staff, master and Ph.D. students from the department.
Publishing in High Impact Journals-by Dr. Faizan QamarFAIZAN QAMAR
DR. FAIZAN QAMAR
Senior Lecturer (Assistant Professor)
Center for Cyber Security (CYBER), Faculty of Information Science and Technology (FTSM), Universiti Kebangsaan Malaysia (UKM - The National University of Malaysia). 43600 UKM Bangi, Selangor, Malaysia.
Email: dr.faizanqamar@gmail.com , faizanqamar@ukm.edu.my
PROFILE:
DR. FAIZAN QAMAR is currently serving as Senior Lecturer (Assistant Professor) in the Faculty of Information Science and Technology, Universiti Kebangsaan Malaysia (UKM) (The National University of Malaysia), Selangor, Malaysia.
He has a Ph.D. degree in Wireless from the Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia in December 2019. He had completed M.E. degree in Telecommunication from NED University, Karachi, Pakistan in 2013, and B.E. degree in Electronics from Hamdard University, Karachi, Pakistan, in 2010.
He has more than Ten years of research and teaching experience.
He has authored and co-authored more than 45 ISI & Scopus journals and IEEE conference papers. The publications include several high impact Q1/Q2 ranking journals such has Computer Networks, IEEE Access, Adhoc Network, etc.
He is also serving as a reviewer and editorial board member in more than 30 high reputation journals with many well-known publishers such as IEEE, Elsevier, Springer, Wiley, Hindawi, etc.
Research interests include Interference Management, Wireless Sensor Network, Internet of Things, Mobile Adhoc Networks, D2D communication, Millimeter-Wave Communication, Machine Learning and Artificial Intelligence approaches in 5G and Beyond Network Designs.
This document summarizes different types of library sources for ITCT students and how to evaluate sources. It discusses scholarly journals, trade journals, conference papers, and technical reports. It explains the importance of peer review in evaluating scholarly sources and outlines the CRAAP test for assessing source credibility based on currency, relevance, authority, accuracy, and purpose. The document also provides tips for searching academic databases and continuing research after graduation through open access journals, institutional repositories, and pre-prints.
Course Thesis Writing for MBA Technical University of Moldovacicbinovatii
Course Thesis Writing for MBA students for the e-Agrimba Program at the Technical University of Moldova in Chisinau
In this course four elements are important:
Information (lectures),
Application (personal assignments),
Presentation by students,
Evaluation and feed-back (Students and Lecturers).
Presentations, personal assignments and feed-back (comments) will be evaluated and marked (no exam).
The document provides information about publishing in high impact journals. It discusses types of academic papers such as original papers, letters, review papers, and design papers. It also outlines the structure of different paper types. The document is presented by Dr. Mohamed A. Alrshah, a senior lecturer and journal referee for various high impact IEEE and Elsevier journals.
This document provides guidance on writing a successful research proposal. It discusses the key components of a proposal such as the title, abstract, introduction, literature review, aims and objectives, methodology, timeline, budget, and references. The objective is to describe what will be done, why it should be done, how it will be done, and what results are expected. An effective proposal clearly outlines the research problem, methodology, intended outcomes, and significance of the study. It also demonstrates the qualifications of the research team and feasibility of the budget. Overall, this document serves as a useful guide for developing a well-structured research proposal that persuades reviewers of the study's importance and viability.
The document discusses how to find information in civil and environmental engineering. It outlines the scientific method and how it relates to information retrieval. It describes various information sources like journals, conference proceedings, magazines, books, and databases. It provides tips on developing effective search strategies, evaluating results, and citing sources properly.
TRANSFORMASI DATA MENJADI JURNAL ILMIAH.pptxRidha778536
The document discusses transforming research data into an internationally standardized scientific journal. It begins by explaining that research results should be accurately expressed in accordance with journal publication rules to ensure acceptability. It then discusses the experience of accepted article rates, the role of reviewers in assessing manuscripts, and factors considered in publication decisions. Finally, it provides guidance on writing different sections of a research paper such as the introduction, methods, results, and discussion to clearly present findings and facilitate reader understanding.
Deductive vs Inductive ReasoningDeductive reasoning starts out w.docxsimonithomas47935
This document provides guidance for writing a research report, including its structure, formatting, and content. It outlines a five-chapter model for the report, with each chapter addressing a different component: Chapter 1 provides an introduction and background; Chapter 2 presents a literature review; Chapter 3 describes the methodology; Chapter 4 presents the findings and results; and Chapter 5 offers conclusions. Additional sections like the abstract, references, and appendices are also noted. Specific requirements are given for formatting the report, citing sources, and ensuring academic integrity. The document serves as a reference for students in developing an original research report that demonstrates their expertise on the chosen topic area.
The document provides an overview of tools and resources for conducting literature reviews from Clarivate, including:
- Web of Science for searching publications and tracking citation networks
- Journal Citation Reports for evaluating journals
- InCites for analyzing institutional research output
- Additional tools for reference management, manuscript submission, and accessing full text
It also covers the process of literature reviews including searching, evaluating, analyzing sources, and writing up findings.
Publishing with IEEE Workshop February 2019uoblibraries
The document provides tips on improving research paper submissions to IEEE publications, including choosing the right publication, structure and format of papers, ethics in publishing, open access options, and using impact factors. It also outlines next steps for authors such as conducting a literature review and search on IEEE Xplore. The document is intended to help authors share critical information and innovations with the global engineering and technology community through IEEE publishing.
The document discusses the use of information technology in scientific article writing and publication strategies. It provides examples of digital tools that can help with tasks like finding relevant papers, summarizing research, editing manuscripts, and improving writing quality. AI tools are presented that can assist with activities involving scientific publications such as paper editing, paraphrasing sentences, and journal review. Guidelines are offered for selecting suitable journals for publication and navigating the submission process.
Research!
Linked Assignments
Annotated Bibliography
Length: 5 citations and annotations
Value: 15%
Research Paper
Length: 2-3 pages
Value: 20%
Research Infographic Assignment
Length: One poster page
Value 10%
Annotated Bibliography
Provide a working bibliography of FIVE (5) sources, with annotations indicating why you believe the work you have chosen is a suitable one for your research paper. Use the criteria from the course notes to prove that your source is appropriate.
Each entry should include:
1. Full bibliographical information: author, title, publisher, date, internet address (URL) or library database. For this class we will be using APA format.
2. Two to four sentences that summarize what the article/book/video (or other item) is about. Two to four sentences that discuss the usefulness of this article to your paper. One or two sentences identifying why you determined whether this was an appropriate source.
Each of the annotations should be about a paragraph, no more than half a page. You will be judged on accuracy, quality of research and critical ability. Note that all five works are expected to be judged suitable.
Sample
See handout
Research Paper
Using the Powerpoint presentation for inspiration, research a technology, idea or concept that you would like to see implemented in the field of public health, food security, public art, or climate change adaptation to address an issue or problem you have identified. Your goal is to write a short paper in which you try to convince your audience to adopt this new technology, concept or idea. This paper is based on the concept of a policy briefing, though we will be adapting the format to suit our needs.
Audience: your audience should be a person or group of people who have the capacity to implement the technology, idea or concept you are proposing. For example, if you think that a great climate change adaptation idea is to build porous sidewalks and alleys as they have in Chicago and other cities, then you would address your paper to city council. If you think that Camosun College should have more public art, then you would address your paper to Camosun College Administration. So do a bit of research and discover whom to address your paper to.
Tone and Terminology: Make sure that the tone you use in your writing is appropriate. In most cases, your tone should be professional and concise. Avoid jargon that your audience would not know. (And please remember that I need to understand what you are writing). Your goal is to communicate, not to confuse.
Purpose: Your purpose is to persuade your reader to adopt the technology, idea or concept that you are presenting. Make sure to inform your reader what the current issue or problem is, as well as how it will be addressed by adopting the technology, idea or concept you propose. To do this, you will have to research what the current dialogue or conversation on the topic is. A strong persuasive paper will inclu.
Technical writing involves publishing research results in journals to advance the field and receive credit. The process begins with experiments, literature review to identify gaps, and developing a manuscript with an introduction, methods, results and discussion. Key questions to consider are whether the research significantly advances knowledge and is interesting to peers. Thoroughly reviewing previous work and selecting the appropriate journal helps get published. References and citations must properly attribute prior work to avoid plagiarism.
The document provides an overview of the research methodology process for science and technology. It defines research and notes that research involves systematically collecting and analyzing data to increase understanding, interpreting data to draw conclusions, and building on past research rather than just restating facts. The document outlines Wallace's model for the research process and discusses key stages including proposing a research topic after reviewing literature, conducting the research, and documenting the work through publications like conference and journal papers. It also provides guidance on components of documentation like the research proposal, thesis, scientific writing format IMRAD, and considerations for publication.
How to write a Scientific Manuscript – Pubrica.pdfPubrica
Writing a scientific manuscript is difficult for even the brightest minds, but it is highly satisfying once the project is completed. Researchers meticulously create manuscripts to share their original ideas and fresh discoveries with the scientific community and the general public.
Learn More : https://bit.ly/3ioFNT1
Reference: https://pubrica.com/
Why Pubrica:
When you order our services, we promise you the following – Plagiarism free | always on Time | 24*7 customer support | Written to international Standard | Unlimited Revisions support | Medical writing Expert | Publication Support | Bio statistical experts | High-quality Subject Matter Experts.
Contact us:
Web: https://pubrica.com/
Blog: https://pubrica.com/academy/
Email: sales@pubrica.com
WhatsApp : +91 9884350006
United Kingdom: +44-1618186353
An overview of publishing trends in materials science with advice from Dave Flanagan, the Editor-in-Chief of Advanced Functional Materials on getting your best results published in top journals.
I recently gave this talk at the Sino-US Nanomeeting at the University of Science and Technology (USTC), Hefei, China and at a number of universities that I had the opportunity to visit.
Questions and comments are welcome in the discussion below.
The document provides guidance on how to write and publish a world-class paper. It discusses selecting the right audience and journal, the peer-review process, metrics for comparing journals, and tips for conducting effective literature searches and developing a strong manuscript. Key points include identifying a novel, clear message; choosing the journal based on the intended audience and level of interest; and defining the contribution to advance scientific understanding.
Publishing in high impact factor journals - Universiti Putra MalaysiaMohamed Alrshah
This workshop has been organized by the Network, Parallel and Distributed Computing Research Group at the Department of Communication Technology and Networks at Universiti Putra Malaysia. The audience was 40 people from academic staff, master and Ph.D. students from the department.
Publishing in High Impact Journals-by Dr. Faizan QamarFAIZAN QAMAR
DR. FAIZAN QAMAR
Senior Lecturer (Assistant Professor)
Center for Cyber Security (CYBER), Faculty of Information Science and Technology (FTSM), Universiti Kebangsaan Malaysia (UKM - The National University of Malaysia). 43600 UKM Bangi, Selangor, Malaysia.
Email: dr.faizanqamar@gmail.com , faizanqamar@ukm.edu.my
PROFILE:
DR. FAIZAN QAMAR is currently serving as Senior Lecturer (Assistant Professor) in the Faculty of Information Science and Technology, Universiti Kebangsaan Malaysia (UKM) (The National University of Malaysia), Selangor, Malaysia.
He has a Ph.D. degree in Wireless from the Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia in December 2019. He had completed M.E. degree in Telecommunication from NED University, Karachi, Pakistan in 2013, and B.E. degree in Electronics from Hamdard University, Karachi, Pakistan, in 2010.
He has more than Ten years of research and teaching experience.
He has authored and co-authored more than 45 ISI & Scopus journals and IEEE conference papers. The publications include several high impact Q1/Q2 ranking journals such has Computer Networks, IEEE Access, Adhoc Network, etc.
He is also serving as a reviewer and editorial board member in more than 30 high reputation journals with many well-known publishers such as IEEE, Elsevier, Springer, Wiley, Hindawi, etc.
Research interests include Interference Management, Wireless Sensor Network, Internet of Things, Mobile Adhoc Networks, D2D communication, Millimeter-Wave Communication, Machine Learning and Artificial Intelligence approaches in 5G and Beyond Network Designs.
This document summarizes different types of library sources for ITCT students and how to evaluate sources. It discusses scholarly journals, trade journals, conference papers, and technical reports. It explains the importance of peer review in evaluating scholarly sources and outlines the CRAAP test for assessing source credibility based on currency, relevance, authority, accuracy, and purpose. The document also provides tips for searching academic databases and continuing research after graduation through open access journals, institutional repositories, and pre-prints.
Course Thesis Writing for MBA Technical University of Moldovacicbinovatii
Course Thesis Writing for MBA students for the e-Agrimba Program at the Technical University of Moldova in Chisinau
In this course four elements are important:
Information (lectures),
Application (personal assignments),
Presentation by students,
Evaluation and feed-back (Students and Lecturers).
Presentations, personal assignments and feed-back (comments) will be evaluated and marked (no exam).
The document provides information about publishing in high impact journals. It discusses types of academic papers such as original papers, letters, review papers, and design papers. It also outlines the structure of different paper types. The document is presented by Dr. Mohamed A. Alrshah, a senior lecturer and journal referee for various high impact IEEE and Elsevier journals.
This document provides guidance on writing a successful research proposal. It discusses the key components of a proposal such as the title, abstract, introduction, literature review, aims and objectives, methodology, timeline, budget, and references. The objective is to describe what will be done, why it should be done, how it will be done, and what results are expected. An effective proposal clearly outlines the research problem, methodology, intended outcomes, and significance of the study. It also demonstrates the qualifications of the research team and feasibility of the budget. Overall, this document serves as a useful guide for developing a well-structured research proposal that persuades reviewers of the study's importance and viability.
The document discusses how to find information in civil and environmental engineering. It outlines the scientific method and how it relates to information retrieval. It describes various information sources like journals, conference proceedings, magazines, books, and databases. It provides tips on developing effective search strategies, evaluating results, and citing sources properly.
TRANSFORMASI DATA MENJADI JURNAL ILMIAH.pptxRidha778536
The document discusses transforming research data into an internationally standardized scientific journal. It begins by explaining that research results should be accurately expressed in accordance with journal publication rules to ensure acceptability. It then discusses the experience of accepted article rates, the role of reviewers in assessing manuscripts, and factors considered in publication decisions. Finally, it provides guidance on writing different sections of a research paper such as the introduction, methods, results, and discussion to clearly present findings and facilitate reader understanding.
Deductive vs Inductive ReasoningDeductive reasoning starts out w.docxsimonithomas47935
This document provides guidance for writing a research report, including its structure, formatting, and content. It outlines a five-chapter model for the report, with each chapter addressing a different component: Chapter 1 provides an introduction and background; Chapter 2 presents a literature review; Chapter 3 describes the methodology; Chapter 4 presents the findings and results; and Chapter 5 offers conclusions. Additional sections like the abstract, references, and appendices are also noted. Specific requirements are given for formatting the report, citing sources, and ensuring academic integrity. The document serves as a reference for students in developing an original research report that demonstrates their expertise on the chosen topic area.
The document provides an overview of tools and resources for conducting literature reviews from Clarivate, including:
- Web of Science for searching publications and tracking citation networks
- Journal Citation Reports for evaluating journals
- InCites for analyzing institutional research output
- Additional tools for reference management, manuscript submission, and accessing full text
It also covers the process of literature reviews including searching, evaluating, analyzing sources, and writing up findings.
Publishing with IEEE Workshop February 2019uoblibraries
The document provides tips on improving research paper submissions to IEEE publications, including choosing the right publication, structure and format of papers, ethics in publishing, open access options, and using impact factors. It also outlines next steps for authors such as conducting a literature review and search on IEEE Xplore. The document is intended to help authors share critical information and innovations with the global engineering and technology community through IEEE publishing.
The document discusses the use of information technology in scientific article writing and publication strategies. It provides examples of digital tools that can help with tasks like finding relevant papers, summarizing research, editing manuscripts, and improving writing quality. AI tools are presented that can assist with activities involving scientific publications such as paper editing, paraphrasing sentences, and journal review. Guidelines are offered for selecting suitable journals for publication and navigating the submission process.
Research!
Linked Assignments
Annotated Bibliography
Length: 5 citations and annotations
Value: 15%
Research Paper
Length: 2-3 pages
Value: 20%
Research Infographic Assignment
Length: One poster page
Value 10%
Annotated Bibliography
Provide a working bibliography of FIVE (5) sources, with annotations indicating why you believe the work you have chosen is a suitable one for your research paper. Use the criteria from the course notes to prove that your source is appropriate.
Each entry should include:
1. Full bibliographical information: author, title, publisher, date, internet address (URL) or library database. For this class we will be using APA format.
2. Two to four sentences that summarize what the article/book/video (or other item) is about. Two to four sentences that discuss the usefulness of this article to your paper. One or two sentences identifying why you determined whether this was an appropriate source.
Each of the annotations should be about a paragraph, no more than half a page. You will be judged on accuracy, quality of research and critical ability. Note that all five works are expected to be judged suitable.
Sample
See handout
Research Paper
Using the Powerpoint presentation for inspiration, research a technology, idea or concept that you would like to see implemented in the field of public health, food security, public art, or climate change adaptation to address an issue or problem you have identified. Your goal is to write a short paper in which you try to convince your audience to adopt this new technology, concept or idea. This paper is based on the concept of a policy briefing, though we will be adapting the format to suit our needs.
Audience: your audience should be a person or group of people who have the capacity to implement the technology, idea or concept you are proposing. For example, if you think that a great climate change adaptation idea is to build porous sidewalks and alleys as they have in Chicago and other cities, then you would address your paper to city council. If you think that Camosun College should have more public art, then you would address your paper to Camosun College Administration. So do a bit of research and discover whom to address your paper to.
Tone and Terminology: Make sure that the tone you use in your writing is appropriate. In most cases, your tone should be professional and concise. Avoid jargon that your audience would not know. (And please remember that I need to understand what you are writing). Your goal is to communicate, not to confuse.
Purpose: Your purpose is to persuade your reader to adopt the technology, idea or concept that you are presenting. Make sure to inform your reader what the current issue or problem is, as well as how it will be addressed by adopting the technology, idea or concept you propose. To do this, you will have to research what the current dialogue or conversation on the topic is. A strong persuasive paper will inclu.
Similar to Publishing in a High Quality Journal.pptx (20)
Communicating effectively and consistently with students can help them feel at ease during their learning experience and provide the instructor with a communication trail to track the course's progress. This workshop will take you through constructing an engaging course container to facilitate effective communication.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) CurriculumMJDuyan
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptxEduSkills OECD
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
How to Setup Warehouse & Location in Odoo 17 InventoryCeline George
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Publishing in a High Quality Journal.pptx
1. ABOUT
ME
• Alvin K. Mulashani
• School of Earth Resources
• In Wuhan since 2018
• B.Eng., MSc and PhD in oil &
Natural gas Engineering
• XSYU, MSc, 2018
• CUG, Ph.D. 2021
丝路博士论坛
Silk Road Doctor Forum
Place: Silk Road Institute (212)Nanwangshan
Campus, CUG
Date: 2022年09月22日)
2. Dr. Fang Zhijian
Ibrahim AL-Wesabi
Topic: Publishing in a High Quality Journal
Speaker: Ibrahim AL-Wesabi
Supervisor: Professor Fang Zhijian
3. PROFILE
Ibrahim Alwesabi
School of Automation
In Wuhan since 2016
A PhD in the field of Artificial
Intelligence and Optimization
Algorithms in Renewable
Energy Recourses
SU, BScs, 2014
CUG, MSc. 2020
4. 04
Contents.
Introduction of the Artificial Intelligence (AI)
and Nature bioinspired Algorithms
Artificial Intelligence in Renewable Energy
Background About Publication
Types of Papers (in general)
Writing Quality Papers
The general review process
Choosing the appropriate journal
Submitting your manuscript
CONTENTS
5. What is the Artificial Intelligence?
Artificial intelligence is a technology that enables
a computer to think or act in a more human way.
It does this by taking the information from it's
surrounding and deciding its response based on
what it learns or sense
Increased Efficiency. One of the greatest advantages
of AI systems is that they enable humans to be more
efficient. ...
Improved Workflows. ...
Lower Human Error Rates. ...
Deeper Data Analysis. ...
More Informed Decision Making. ...
24 / 7 Availability.
Advantages
of Artificial
Intelligence
Introduction of the AI and Nature bioinspired Algorithms
6. Introduction of the AI and Nature bioinspired Algorithms
What is a nature-inspired algorithm?
Nature-inspired algorithms are a set of novel problem-
solving methodologies and approaches derived from
natural processes.
Some of the popular examples of nature-inspired
optimization algorithms include:
genetic algorithm,
particle swarm optimization,
cuckoo search algorithm,
ant colony optimization and so on.
7. AI and in Nature-inspired Algorithm in Renewable Energy
What is renewable energy and examples?
Renewable energy sources are energy sources that
are always being replenished. They can never be
depleted. Some examples of renewable energy
sources are solar energy, wind energy,
hydropower, geothermal energy, and biomass
energy.
What are the benefits of using AI in renewable
energy sector?
AI in renewable energy sector can help: 1. Build
Smart, Centralized Control Centers 2. Improved
Integration of Microgrids 3. Improve Safety and
Reliability 4. Expand the Market 5. Build Smart
Grid with Intelligent Storage
The power grids generate a large amount of data
and data patterns. Based on this data, energy
companies can make decisions and improve supply
chain management.
8. Background About Publication
Facts
Before we start, you must know that
Your research is worthless unless it is published.
The value of an article increases when it is being
cited in other research articles.
The publication is the knowledge sharing
You “Publish or Perish”
9. Background About Publication
Attention
Our focus here will be on the most beneficial publications
types for the graduate students to fulfill the graduation
requirements in their research journeys (Journal and
conference papers)
10. Background About Publication
Aims of Publication
Aims of publication are including:
To build the author's record (CV & reputation) of research
contributions in form of papers.
To guarantee intellectual property of scientific contributions in
academia and industry.
To encourage scientists to share knowledge that they might
otherwise have kept secret.
To create a sense of competition among scientists to be the first
to publish a new scientific finding.
To have other researchers do further research based on the
published paper.
To participate in advancing knowledge.
11. Background About Publication
Publication Types
Journal papers
Proceeding papers (Conferences,
Workshops, and so on.)
Magazine papers
Letters
Patents
Chapter in a book
Books
12. Background About Publication
Journal papers
Allow researchers to communicate their researches with their peers.
Provide a great opportunity to get professional comments about your
work.
Usually contain the contribution(s) made by the researcher(s).
Should provide complete information about a particular piece of research.
High impact journals mostly apply the peer-reviewing process.
Publishing a journal paper is a time-intensive process.
To deliver your research to the world faster, try publishing at a conference!
13. Background About Publication
Proceedings papers
Academic articles published based on academic events such as
conferences, workshops, and so on.
Provide a great opportunity to meet with professional researchers in your
area.
Usually contain the contribution(s) made by researcher(s) and presented
at an event.
Awritten record of a research to be presented to fellow researchers.
In some fields, proceedings papers may be considered gray literature.
Published faster than Journal papers.
Many proceedingspublications are peer-reviewed.
14. Background About Publication
Why You Should Publish in a High Impact Journal
Publication in a high impact journal enables you to share with the academic community your novelty ideas,
research findings, and new knowledge gained from the research.
It can help you get permanent positions, get invited as a speaker in a renowned conference, or even help you
get prestigiousgrants.
Getting published in a high impact journal can help advance your academic life and career.
It can also help get your article seen by colleagues in your field and get cited in their own groundbreaking
paper.
15. Background About Publication
Why You Should Publish in a High Impact Journal
16. Types of Papers (in general)
The common types of Papers
Original papers (full papers)
Letters (short papers)
Review or Survey Papers
Design papers
White papers
Book Review
And many more.
17. Types of Papers (in general)
General structure of research articles
Introduction
Methodology
Results
Discussion
Conclusion
References
18. Types of Papers (in general)
Original papers (full papers)
Original papers can be published either in journals or in conferences.
Original research articles must present:
Detailed studies reporting original research.
Satisfactory level of novelty.
The primary literature of the original contribution.
Critical discussion of related works.
Detailed explanation of the proposed work(s) using textual and graphical tools.
Deep discussion and interpretation of the results from all aspects.
Discussion of possible implications (impact and future directions).
Limitations, if any.
19. Types of Papers (in general)
Structure of original papers
Title
Abstract
Keywords }
Make these components as easy as you can.
They must be informative, attractive, and
effective.
Must be helpful for indexing and searching.
Introduction
Related works
Proposed work(s)
Results and discussion
}
Paper space is not boundless and reader's time is
limited.
The work must be clear (nothing is hidden), correct,
complete, precise, concise, straightforward and
reproducible.
Must use simple language.
Conclusion
Acknowledgement
References
Supplementary material
Must be brief and comprehensive (avoid repeating
sentences).
Funding information and thanks for people who helped in
this work.
Must be applicable, accessible, proper and sufficient.
If any (optional).
}
20. Writing Quality Papers
Important criteria for writing scholarly papers
In order to write a high quality scientific paper, you must consider the
following points:
The Formatting (word count, no of figures, no of tables, referencing)
The Language
The Structure
The Clarity
The Coherence
The Completeness
The Originality and Novelty
The Significance
The Plagiarism
21. Writing Quality Papers
Choosing the proper editing tool
MicrosoftWord produces good quality documents.
Libre Office is a free and open-source.
However, Latex produces very high-quality documents.
Changing an article format is easier with Latex (in case of changing journal).
The best tool is the one compatible with the template of the targeted journaI.
22. Writing Quality Papers
Choosing the proper drawing tool
Pixel-based graphs are ok if they are kept with the original ratio.
jpg, png and so on.
Victor-based graphs (eps, epf) are very high quality.
eps usually used with Latex (not supported in MicrosoftWord).
epf usually used with MicrosoftWord.
MicrosoftVisio is a good tool that producesa high-quality diagrams.
Libre draw is a free tool that produces a high-quality diagrams.
There are many tools such as:
Draw.io Diagrams.
Lucidchart.
Cacoo Diagram Maker
23. Writing Quality Papers
Choose the proper reference management tool
Endnotes is a excellent tool, but it is not free.
Mendeley, Zotero, Qiqqa and Bibtex are excellent and free tools.
If you haveArabic references, better choose Zotero or Qiqqa.
If you use Latex, you have to use Bibtex.
24. Writing Quality Papers
Checking the similarity
To avoid plagiarism,produce the similarity report.
There are a lot of tools to check similarity.
However, the journals' editors mostly use Turnitin.
Don't play with the filter's settings to reduce similarity.
Paraphrase the similar parts and re-check withTurnitin.
25. Writing Quality Papers
Editing and proofreading
Make sure that:
The language used in your manuscript is up to the professional level.
The structure of your manuscript is proper and correct.
The flow of ideas is correct.
Make sure that your manuscript is consistent.
Check consistencyof names.
Check the abbreviations.
If you can't do all of these yourself, look for editing and proofreading services
that are: Professional and Official.
See https:ijwww.elsevier.com/authors/author-services
26. The general review process
The Review life cycle: behind the scene
27. The general review process
The possible verdicts
Out of scope (before/after review).
Reject (before/after review).
Reject - Resubmission is NOT recommended.
Reject - Resubmission after amendment is
recommended.
Minor correction (conditional acceptance).
Major correction (conditional acceptance).
Accept.
} be careful both may lead to rejection!
28. The general review process
If your paper was rejected - WHAT NEXT?
Appeal the rejection.
Appealing a rejection is within your rights as an author.
Base your appeal on Iogic andnot emotion.
Outline your points to the editor without belittling the reviewers or being argumentative.
Appeals based on the scope of the journal are unlikely to succeed.
Resubmit to the same journal.
The journal may reject your initial offering but invite you to resubmit later after addressing the
reviewers' concerns.
Remember, if a journal informed you that they are not interested in accepting any future versions of
the manuscript, you should respect their decision and try a different journal.
Make changes and submit to a different journal.
Consider the given comments and improve the manuscript.
Don't forget to change the format of the manuscript and to modify the cover letter.
Make no changes and submit to another journal.
Not a good idea since your manuscript maybe reviewed by some of the same reviewers at the new
journal.
29. The general review process
Eight reasons EiC rejected your article
1. It fails the technical screening. (plagiarism or under review in another journal)
2. It's incomprehensible. (The language, structure, or figures are so poor that it can't
be assessed)
3. It does not fall within theAims and Scope.
4. It's incomplete (The article contains observations but is not a full study.)
5. The procedures and/or analysis of the data is seen to be defective or deficient.
6. The conclusions cannotbe justified on the basis of the rest of the paper.
The arguments are illogical, unstructured or invalid.
The data does not support the conclusions.
The conclusions ignore large portions of the literature.
7. Its simply a small extensionof a different paper, often from the same authors.
8. It's boring.
30. Choosing the appropriate journal
Important criteria for selection
Based on disciplinary
Multidisciplinary journals.
Interdisciplinary journals.
Specialized journals
Based on accessibility
Open access journals
Subscription-based journals
Based on indexing
Scopus journals
ISi master journals
ISi journals
Based on the review speed
Rapid publication journals.
Traditional journals
31. Choosing the appropriate journal
Check recent papers published in the selected journal
Go to the website of the candidate journal.
Read the scope of the journal carefully.
Download a set of papers related to your topic.
Check the submission, revision and acceptance dates.
If you decided to submit to the selected journal:
Download the journal's template.
Re-format your manuscript based on the template.
33. Submitting your manuscript
Preparing a list of suggested reviewers (if required)
Dear Editor-in-Chief
For this submission, we respectfully suggest the
following reviewers:
1. Carlo Caini, Professor of telecommunications,
University of Bologna.carlo.caini@unibo.it
2. Sandor Molnar,
telecommunications,
Associate
Budapest
Technology. molnar@tmit.bme.hu
3. Chris Blondia, Professor of mathematics and computer
science, University of Antwerp.
chris.blondia@uantwerpen.be
Your cooperation is highly appreciated.
Thank you so much.
Professor
Universit
y
of
of
34. Submitting your manuscript
Preparing a list of conflicted reviewers (if any)
Dear Editor-in-Chief
For this submission, we respectfully would like to inform you that
we have some conflict of interest with the following respectful
names:
1. Xyzl Xyzl, Professor of telecommunications, University of
Xyzl.xyzl@xyz.com
2. Xyz2 Xyz2, Associate Professor of telecommunicati ans, Xyz2
University of Technology. xyz2@xyz.com
Thus, we would be very grateful if these names are avoided.
Your cooperation is highly appreciated. Thank you so
much.
35. Submitting your manuscript
Preparing the authors' biography
It must include:
• The name.
• Membership (optional).
• Current academic position (optional).
• The academic Qualifications with dates and
universities.
• The important academic achievements.
• The research interests.
Author Biographies:
l• Mohamed A. Alrshah: (M'13, ) received his BSc degree In Computer Science from
Naser University • Libya, in 2000, and his MSc degree In computer networks In May
2009 and his Ph.D. In communication technology and networks In Feb 2017 from
Unlversltl Put.ra Malaysia. Currently, he Is a senior lecturer at Al Asma,ya University at
the Faculty of I nformatlon Technology, Zllten, Libya. He has published a number of
artlde-s In highImpact factor scientific journals. His research interests areIn the-field
of high-speed TCP protocols, high-speed network, parallel and distributed algorithms,
softwaredefinednet'INOrklng, network de-signandmanagement, wireless networks.
2· Mo med A. AI-Moqrl: received his BSc degree- In Computer Science from
Alm anseriah University, Iraq, In 2000, and his MSc degrtt Incomputer networks In
2 and his Ph.D. in communication technology and networks in 2016 from
IversItI Putra Malaysia. Hehas published a number of articles in highImpact factor
se:hmtlflc Journals. His research interests areIn the field of high-speed TCP protocols,
high-speed netYIIOrk, QoS, scheduling algorithms, admission control and wireless
networks.
3- Mohamed Othman: (M'04) received his PhD rrom the Unh1ersltl Kebangsaan
Malaysia withdistinction (Best PhD Thesis In 2000 awarded by Sime Darby Malaysia
and Malaysian Mathematical Science Society). Now, he Is a Professor In the Faculty of
Computer ScienceandInformation Technology, Unlversltl Putra Malaysia (UPM).He Is
also an associate researcher at the lab of Computational Science and Mathematical
Physics, Institute of Mathematical Research (INSPEM), UPM. He published more than
160Internatlonal journals and 230 proceeding papers. Hlsmainresearch Interests are
In the fields of high speed network, parallel and distributed algorithms, software
defined networking, network design andmanagement, wireless network (MPOU• and
MSDU•Frame aggregation, TCP Performance, MAC layer, resource management, and
trafficmonitoring) andscientific telegraphequation andmodelling.
36. Submitting your manuscript
Creating your researcher identity
Use one or more of the internationally recognized platforms:
ORCID (Open Researcher and Contributor ID)
Google Citations
Scopus Author.
ResearcherlD
orcid.org/
scholar.google.com.my/citations?hl=en
www.scopus.com/
www.researcherid.com/