Prysmian JBRCC Low Voltage Universal Cable Joint Kits
•
0 likes•455 views
The document discusses JEM resin and JBRCC low voltage universal cable joint kits for joining copper and aluminum conductors from 1.5mm2 to 300mm2. The kits include JEM resin, which has advantages like being isocyanate-free, having low viscosity for void-free filling, and being insensitive to moisture. The kits also include mechanical connectors that require no special tools and allow for a good conductor range, as well as armour bonds. The document provides specifications on the kits, including part numbers for different conductor sizes and core configurations. It also gives dimensions for the joint shells.
Report
Share
Report
Share
Download to read offline
Recommended
Prysmian ZHMB Low Voltage Afumex LSOH Low Smoke Zero Halogen Cable Joint Kits
Prysmian ZHMB Low Voltage Afumex LSOH Low Smoke Zero Halogen Cable Joint KitsThorne & Derrick International
This document provides information on JEM resin cable joint kits for low smoke and halogen free (LSOH) low voltage cables. The kits include glass reinforced phenolic joint shells, low viscosity JEM resin for filling joints, and constant force spring armour bonds. The resin has advantages like being isocyanate-free, easy to mix, extremely low viscosity, and adhesive. It cures under water and is not classified as irritating or sensitizing. Joint shells are fire retardant and LSOH. Tests show the complete joints meet standards and have an A0 smoke emission value less than the maximum 1.5. Tables provide details on joint dimensions, conductor sizes each joint is suitable for, and characteristics like high oxygenPrysmian ZHMPJ Low Voltage Afumex LSOH Low Smoke Zero Halogen Cable Joint Kits
Prysmian ZHMPJ Low Voltage Afumex LSOH Low Smoke Zero Halogen Cable Joint KitsThorne & Derrick International
This document provides information on JEM straight joint kits for low voltage (LV) cables with copper conductors ranging from 1.5mm2 to 400mm2. The joints use a low hazard, isocyanate-free JEM resin for filling that has low viscosity, enhanced adhesion, and will cure under water. They include rigid, glass-reinforced phenolic joint shells that are fire retardant and low smoke, zero halogen (LSOH) material. Technical data is provided on tests and approvals as well as resin and shell characteristics. Dimensions and part numbers are listed for joints accommodating different conductor sizes and core configurations.Instruction- 3 Core Polymeric (XLPE EPR) 6.6kV-7.2kV Heat Shrink Cable Termin...
Instruction- 3 Core Polymeric (XLPE EPR) 6.6kV-7.2kV Heat Shrink Cable Termin...Thorne & Derrick International
This document provides installation instructions for heatshrink termination of 3 core polymeric cables between 7.2kV and 36kV. It describes preparing the cable by removing the outer sheath and screen layers. It then details applying stress control tape and tubes, installing lugs and a breakout boot, and applying an anti-track tube. It provides requirements for indoor terminations including separation distances and positioning cores. It also describes installing rain sheds for outdoor terminations and notes on minimum bending radii during installation.Prysmian JUJCC Low Voltage LV Industrial Cable Joint Kits
The document describes JEM cable joint kits for low voltage cables with copper conductors ranging from 1.5mm2 to 400mm2. The kits feature low hazard JEM resin that is easy to mix and extremely low viscosity, allowing for void-free filling of joints. They include compression connectors and armour bonds and are tested and approved according to relevant standards. A variety of kit sizes are specified to accommodate different cable diameters and conductor sizes.
Nexans Euromold 151SP Screened Separable Straight Connector
This document provides information on cable joints, terminations, and related equipment for voltages up to 24kV. It describes a 151SP straight plug that is used to connect polymeric insulated cables. The plug has a conductive EPDM jacket for safety and insulation. Kit contents and ordering instructions are provided for selecting the proper plug configuration based on cable type and size.
3M LCT1 Cold Shrink Termination Kit 35-50sqmm, 0.6/1kV-3.3kV
This document summarizes 3M's cold shrink joints and terminations for low voltage cables. It describes how the products use prestretched tubes that shrink to provide a waterproof seal over cable connections or terminations. Various kits are listed for splicing or abandoning different cable types and voltages, ranging from 0.6/1kV to 6.6kV. Installation is simple with no special tools or heat required. The products are resistant to environmental factors and suitable for indoor and outdoor use.
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...Thorne & Derrick International
This document provides information on heat shrink terminations for low voltage PILC cables ranging from 0.6/1kV. It lists the part numbers, cable ranges, and tail lengths for single core and 3 core indoor/outdoor heat shrink terminations for XLPE and PILC cables ranging from 1.9/3.6kV. It also lists part numbers for 3/4 core PILC cable terminations ranging from 4-300mm2 with tail lengths of 600mm or 1000mm. An note indicates that for 4 core terminations, the last digit of the part number should read -4.Elastimold Connectors Loadbreak & Deadbreak, Cable Joints & Cable Termination...
Elastimold Connectors Loadbreak & Deadbreak, Cable Joints & Cable Termination...Thorne & Derrick International
This document provides a product selection guide for cable accessories used in 5kV-35kV distribution systems, including loadbreak and deadbreak separable connectors, cable joints, cable terminations, and other components. It lists the various elbow connectors, joints, terminations and accessories available from Elastimold in 1-3 sentences per product type and includes voltage ratings, current ratings, and part numbers. Additional sections provide reference information on specifications, cable sizes and standards.Recommended
Prysmian ZHMB Low Voltage Afumex LSOH Low Smoke Zero Halogen Cable Joint Kits
Prysmian ZHMB Low Voltage Afumex LSOH Low Smoke Zero Halogen Cable Joint KitsThorne & Derrick International
This document provides information on JEM resin cable joint kits for low smoke and halogen free (LSOH) low voltage cables. The kits include glass reinforced phenolic joint shells, low viscosity JEM resin for filling joints, and constant force spring armour bonds. The resin has advantages like being isocyanate-free, easy to mix, extremely low viscosity, and adhesive. It cures under water and is not classified as irritating or sensitizing. Joint shells are fire retardant and LSOH. Tests show the complete joints meet standards and have an A0 smoke emission value less than the maximum 1.5. Tables provide details on joint dimensions, conductor sizes each joint is suitable for, and characteristics like high oxygenPrysmian ZHMPJ Low Voltage Afumex LSOH Low Smoke Zero Halogen Cable Joint Kits
Prysmian ZHMPJ Low Voltage Afumex LSOH Low Smoke Zero Halogen Cable Joint KitsThorne & Derrick International
This document provides information on JEM straight joint kits for low voltage (LV) cables with copper conductors ranging from 1.5mm2 to 400mm2. The joints use a low hazard, isocyanate-free JEM resin for filling that has low viscosity, enhanced adhesion, and will cure under water. They include rigid, glass-reinforced phenolic joint shells that are fire retardant and low smoke, zero halogen (LSOH) material. Technical data is provided on tests and approvals as well as resin and shell characteristics. Dimensions and part numbers are listed for joints accommodating different conductor sizes and core configurations.Instruction- 3 Core Polymeric (XLPE EPR) 6.6kV-7.2kV Heat Shrink Cable Termin...
Instruction- 3 Core Polymeric (XLPE EPR) 6.6kV-7.2kV Heat Shrink Cable Termin...Thorne & Derrick International
This document provides installation instructions for heatshrink termination of 3 core polymeric cables between 7.2kV and 36kV. It describes preparing the cable by removing the outer sheath and screen layers. It then details applying stress control tape and tubes, installing lugs and a breakout boot, and applying an anti-track tube. It provides requirements for indoor terminations including separation distances and positioning cores. It also describes installing rain sheds for outdoor terminations and notes on minimum bending radii during installation.Prysmian JUJCC Low Voltage LV Industrial Cable Joint Kits
The document describes JEM cable joint kits for low voltage cables with copper conductors ranging from 1.5mm2 to 400mm2. The kits feature low hazard JEM resin that is easy to mix and extremely low viscosity, allowing for void-free filling of joints. They include compression connectors and armour bonds and are tested and approved according to relevant standards. A variety of kit sizes are specified to accommodate different cable diameters and conductor sizes.
Nexans Euromold 151SP Screened Separable Straight Connector
This document provides information on cable joints, terminations, and related equipment for voltages up to 24kV. It describes a 151SP straight plug that is used to connect polymeric insulated cables. The plug has a conductive EPDM jacket for safety and insulation. Kit contents and ordering instructions are provided for selecting the proper plug configuration based on cable type and size.
3M LCT1 Cold Shrink Termination Kit 35-50sqmm, 0.6/1kV-3.3kV
This document summarizes 3M's cold shrink joints and terminations for low voltage cables. It describes how the products use prestretched tubes that shrink to provide a waterproof seal over cable connections or terminations. Various kits are listed for splicing or abandoning different cable types and voltages, ranging from 0.6/1kV to 6.6kV. Installation is simple with no special tools or heat required. The products are resistant to environmental factors and suitable for indoor and outdoor use.
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...Thorne & Derrick International
This document provides information on heat shrink terminations for low voltage PILC cables ranging from 0.6/1kV. It lists the part numbers, cable ranges, and tail lengths for single core and 3 core indoor/outdoor heat shrink terminations for XLPE and PILC cables ranging from 1.9/3.6kV. It also lists part numbers for 3/4 core PILC cable terminations ranging from 4-300mm2 with tail lengths of 600mm or 1000mm. An note indicates that for 4 core terminations, the last digit of the part number should read -4.Elastimold Connectors Loadbreak & Deadbreak, Cable Joints & Cable Termination...
Elastimold Connectors Loadbreak & Deadbreak, Cable Joints & Cable Termination...Thorne & Derrick International
This document provides a product selection guide for cable accessories used in 5kV-35kV distribution systems, including loadbreak and deadbreak separable connectors, cable joints, cable terminations, and other components. It lists the various elbow connectors, joints, terminations and accessories available from Elastimold in 1-3 sentences per product type and includes voltage ratings, current ratings, and part numbers. Additional sections provide reference information on specifications, cable sizes and standards.SPS Heat Shrink Terminations XLPE/SWA/PVC Cables 0.6/1kV
The document provides information on heat shrink cable terminations for XLPE/SWA/PVC cables with voltages up to 1kV. It lists the available part numbers for 2, 3, and 4 core cable termination kits along with the applicable cable size ranges. Optional accessories include longer tail lengths for the core tubes, bolt-on earth glands, and test reports. Contact and product information is also provided for the manufacturer.
Nexans Euromold 180AR High Voltage Oil Insulated Bushing
This document provides information about cable joints, terminations, glands, cleats, feeder pillars, fuse links, and arc flash equipment. It lists contact information for Thorne and Derrick UK, which supplies 11kV and 33kV cable joints and terminations. The document also provides specifications, ordering instructions, and dimensions for interface equipment bushings rated up to 24kV and 250A.
Instrumentation cables rev2
This document provides information on instrumentation cables, including their purpose, applicable standards, typical configurations, conductor types, insulation, screening, armoring, sheathing, and protection. Instrumentation cables are multiple conductor cables that convey low energy electrical signals for industrial processes. They are commonly used in industrial projects to connect electrical instrument circuits and provide communication services around process plants. The document discusses cable components, materials, and specifications according to various standards like BS 5308.
RAYCHEM TERMINATION KIT-TYCO TERMINATION-케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
This document provides installation instructions for terminating screened single core polymeric insulated cables without armour from 7.2 kV to 36 kV. The instructions summarize preparing the cable by removing the outer sheath and cleaning the insulation. They describe applying sealant tape and void filling strips before installing stress control tubing and sealing tubing. Specific steps vary depending on the cable having wire shielding or metal tape shielding. Dimensions for cutting back materials and positioning heat shrink tubing skirts are provided. General safety instructions recommend using a propane torch, avoiding scorching, and disposing of waste properly.
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.CMP PX2K-20S/16 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S/16 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 6.1mm-11.5mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
Heat Shrink Cable Joints - Low Voltage XLPE SWA 0.6kV-3.3kV SPS Heat Shrink J...
Heat Shrink Cable Joints - Low Voltage XLPE SWA 0.6kV-3.3kV SPS Heat Shrink J...Thorne & Derrick International
Heat shrink cable joints to suit PVC, EPR (BS6883) and XLPE (BS5467) multi-core cables up to 3.3kV - the heat shrink cable joint comprises of adhesive lined connector insulation tubes, heavy duty steel wire armour earth cage, armour support rings and clamps and an outer thick wall adhesive lined heat shrink tube.
SPS Heat Shrink Cable Joints & Cable Terminations - Quality Performance Testing : Shrink Polymer Systems heat shrink cable joints and cable termination kits are tested to BS7888 which incorporates Cenelec Standards HD 628 S1 and 629.1 S2 : 2006, DIN VDE0279 and IEC60502.
Heat shrink joints are also available to suit unarmoured cables (including 624Y twin and earth, RV-K flexible power cable, waveform aluminium cables) and paper insulated lead sheathed cables (PILC). LSF zero halogen heat shrink cable joints for BS6724 cables are also available.
DNV accepted heat shrink ships cable joints are available for power, control, instrumentation, signal and communications cables.
* No resin to mix or curing delays - no hazardous class jointing resins
* Immediate energisation and backfill capability of heat shrink cable joint
* Suitable for ducting, vertical and overhead cable jointing
* Light, compact cable joints for space and weight savings on cable tray
* Suitable for LV jointing of underground cables - submersible joints
available
Instrumentation Cables - Nuhas Oman Catalogue
This document describes Nuhas Oman LLC, a producer of cables and copper products. It provides details about their state-of-the-art facilities, high quality standards, and product certifications. Tables are included that list technical specifications for various instrumentation cable types, including unarmored and armored cables with different conductor sizes and configurations. The document emphasizes Nuhas Oman's commitment to total quality management and product excellence.
Instrumentation Cable
This document summarizes the key components of instrumentation cable and their purposes. It discusses the conductor, insulation, cabling elements, individual screen, assembling of cable elements, overall screen, shielding, inner sheath, armour, and outer sheath. The conductor is typically copper and can be solid or multistranded. Insulation protects individual conductors and varies based on voltage rating. Screens and sheaths protect signals and the cable internally and externally. Requirements for the outer sheath include oxygen index, acid generation, smoke density, and flammability standards.
Pfisterer Rail - Connectors, Clamps, Compensating Devices, Insulators & Elect...
Pfisterer Rail - Connectors, Clamps, Compensating Devices, Insulators & Elect...Thorne & Derrick International
The document discusses components and systems for electrifying railway lines provided by PFISTERER Rail Systems. It describes various fittings such as clamps, insulators, and safety equipment used for connecting, suspending, and grounding contact wires, messenger wires, and feeder cables. It also highlights PFISTERER's patented TENSOREX spring-charged tensioning system, which uses coil springs to automatically maintain constant tension in catenary wires and cables despite temperature fluctuations.How To Determine MV-Connex Cable Connectors
The document is a form from Pfisterer for determining MV-CONNEX cable connectors. It requests information about the cable manufacturer, cable type, size, application, installation details, voltages, and cable design. The cable design section lists options for the conductor, insulation, conducting layers, screens, armorings, outer jacket, and remarks. It will be used to determine the appropriate cable connector for the specified cable.
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kVThorne & Derrick International
This document provides information on heat shrink joints for low voltage cables. It describes the components of the joints, which include adhesive lined tubes, armour cages, rings and clamps, and heat shrink tubes. The joints are intended for voltages up to 3.3kV and cable sizes ranging from 1.5mm2 to 630mm2. Part numbers are provided for single core and multicore joints for XLPE, PILC and transition cables. The joints are designed to meet industry standards and have an unlimited shelf life.Prysmian SIENOPYR-FR MI-VHH 2G625
This document provides technical specifications for Sienopyr-FR fiber optic cables intended for use on ships and offshore units. The cables have a nominal voltage of 300V, can operate between -35°C and 80°C, and have mechanical properties suitable for withstanding ship vibrations and bending radii down to 10 times the cable diameter. The document describes the cable design including its fiber optic, copper conductor, insulation, screening, and outer sheath materials. Electrical, thermal, transmission, and mechanical characteristics are specified.
LV & MV Hydrocarbon Resistant_cable_joints-
This document provides information on low voltage (LV) and medium voltage (MV) cable joints that are resistant to hydrocarbons.
It describes two ranges of joints - LV joints that use Prysmian's low hazard resin and rigid shells, and MV joints that use Prysmian's Elaspeed cold-shrink joint bodies for faster installation. Both LV and MV joints are enclosed in JEM resin and glass reinforced shells to provide excellent resistance to hydrocarbons.
The document provides specifications for various joint models including dimensions, compatible connectors, and cable size ranges for LV straight joints and MV Elaspeed straight joints for 11kV, 33kV applications.
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...Thorne & Derrick International
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
3M LO42 Cold Shrink Inline Joint Termination, Network Rail Approved
3M produces cold shrink joints and terminations for low voltage cables using prestretched tubes. The tubes are factory expanded and placed over cable connections or terminals, with a removable core inside. Removing the core allows the tube to shrink and provide a waterproof seal. The cold shrink kits can be used on various cable types rated from 0.6/1kV to 1.9/3.3kV, require no special tools or heat, and accommodate a wide range of cable sizes.
Pfisterer Sicon High Voltage Mechanical Shearbolt Connectors
The document describes a new type of cable connector called SICON that uses a stepless shear bolt. Key points:
1) SICON uses a stepless shear bolt that does not have predetermined breaking points, allowing it to achieve optimum clamping force for any conductor size.
2) Previous multi-stage shear bolts had breaking points that created discontinuities and did not allow maximum force. SICON's bolt breaks smoothly.
3) SICON provides up to 30% increased contact force on aluminum conductors compared to conventional connectors and ensures full utilization of the bolt's clamping ability.
Wirelock
The document provides information about Wirelock, a resin used to terminate wire ropes. It discusses Wirelock's specifications, such as its specific gravity of 1.73. It also describes how to use and store Wirelock properly, noting it should be kept between 10-24°C and used within 15 minutes of mixing at 18°C. The document lists Wirelock's approvals and specifications for different wire rope sizes.
Cable Spiker - Accles & Shelvoke
The Accles & Shelvoke Cable Spiker is a tool for safely de-energizing electric power cables before work is done on them. It can penetrate all types of cable coverings and is operated remotely via a lanyard for employee safety. If a live cable is spiked, the fault current will likely trip the circuit breaker without harming the tool. The Cable Spiker provides a safer alternative to manual spiking with hammers or sticks.
Prysmian JSTCC Low Voltage Universal Cable Joint Kits
JEM resin is used to make straight cable joints for low voltage cables with copper and aluminum conductors ranging from 1.5mm2 to 300mm2. The resin has a low viscosity, is moisture insensitive, and adheres well to cable materials. It is mixed in clear sachets and cured underwater if needed. Cable joint kits include transparent shells, mechanical connectors requiring no special tools, and armor bonds. They are tested and approved for joining low voltage SWA cables per various standards.
Prysmian JST Low Voltage Universal Cable Joint Kits
JST low voltage universal cable joint kits can be used for straight joints on SWA cables with copper or aluminum conductors ranging from 1.5mm2 to 400mm2. The kits include JEM resin, which has an extremely low viscosity allowing for void-free filling and enhanced adhesion. The transparent vacuum formed shells of the kits offer greater working dimensions and interlocking flange seals. The kits are tested and approved according to relevant standards and can be used with either compression or mechanical connectors.
Prysmian MPJEM Low Voltage LV Industrial Cable Joint Kits
The document describes MPJEM low voltage cable joint kits for joining copper conductor cables from 1.5mm2 to 400mm2. The kits feature a low hazard, isocyanate-free JEM resin for filling joints, transparent injection molded shells, and compatibility with common compression connectors. Technical specifications are provided for shell dimensions and selecting the appropriate joint based on cable configuration and conductor size.
More Related Content
What's hot
SPS Heat Shrink Terminations XLPE/SWA/PVC Cables 0.6/1kV
The document provides information on heat shrink cable terminations for XLPE/SWA/PVC cables with voltages up to 1kV. It lists the available part numbers for 2, 3, and 4 core cable termination kits along with the applicable cable size ranges. Optional accessories include longer tail lengths for the core tubes, bolt-on earth glands, and test reports. Contact and product information is also provided for the manufacturer.
Nexans Euromold 180AR High Voltage Oil Insulated Bushing
This document provides information about cable joints, terminations, glands, cleats, feeder pillars, fuse links, and arc flash equipment. It lists contact information for Thorne and Derrick UK, which supplies 11kV and 33kV cable joints and terminations. The document also provides specifications, ordering instructions, and dimensions for interface equipment bushings rated up to 24kV and 250A.
Instrumentation cables rev2
This document provides information on instrumentation cables, including their purpose, applicable standards, typical configurations, conductor types, insulation, screening, armoring, sheathing, and protection. Instrumentation cables are multiple conductor cables that convey low energy electrical signals for industrial processes. They are commonly used in industrial projects to connect electrical instrument circuits and provide communication services around process plants. The document discusses cable components, materials, and specifications according to various standards like BS 5308.
RAYCHEM TERMINATION KIT-TYCO TERMINATION-케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
This document provides installation instructions for terminating screened single core polymeric insulated cables without armour from 7.2 kV to 36 kV. The instructions summarize preparing the cable by removing the outer sheath and cleaning the insulation. They describe applying sealant tape and void filling strips before installing stress control tubing and sealing tubing. Specific steps vary depending on the cable having wire shielding or metal tape shielding. Dimensions for cutting back materials and positioning heat shrink tubing skirts are provided. General safety instructions recommend using a propane torch, avoiding scorching, and disposing of waste properly.
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.CMP PX2K-20S/16 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S/16 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 6.1mm-11.5mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
Heat Shrink Cable Joints - Low Voltage XLPE SWA 0.6kV-3.3kV SPS Heat Shrink J...
Heat Shrink Cable Joints - Low Voltage XLPE SWA 0.6kV-3.3kV SPS Heat Shrink J...Thorne & Derrick International
Heat shrink cable joints to suit PVC, EPR (BS6883) and XLPE (BS5467) multi-core cables up to 3.3kV - the heat shrink cable joint comprises of adhesive lined connector insulation tubes, heavy duty steel wire armour earth cage, armour support rings and clamps and an outer thick wall adhesive lined heat shrink tube.
SPS Heat Shrink Cable Joints & Cable Terminations - Quality Performance Testing : Shrink Polymer Systems heat shrink cable joints and cable termination kits are tested to BS7888 which incorporates Cenelec Standards HD 628 S1 and 629.1 S2 : 2006, DIN VDE0279 and IEC60502.
Heat shrink joints are also available to suit unarmoured cables (including 624Y twin and earth, RV-K flexible power cable, waveform aluminium cables) and paper insulated lead sheathed cables (PILC). LSF zero halogen heat shrink cable joints for BS6724 cables are also available.
DNV accepted heat shrink ships cable joints are available for power, control, instrumentation, signal and communications cables.
* No resin to mix or curing delays - no hazardous class jointing resins
* Immediate energisation and backfill capability of heat shrink cable joint
* Suitable for ducting, vertical and overhead cable jointing
* Light, compact cable joints for space and weight savings on cable tray
* Suitable for LV jointing of underground cables - submersible joints
available
Instrumentation Cables - Nuhas Oman Catalogue
This document describes Nuhas Oman LLC, a producer of cables and copper products. It provides details about their state-of-the-art facilities, high quality standards, and product certifications. Tables are included that list technical specifications for various instrumentation cable types, including unarmored and armored cables with different conductor sizes and configurations. The document emphasizes Nuhas Oman's commitment to total quality management and product excellence.
Instrumentation Cable
This document summarizes the key components of instrumentation cable and their purposes. It discusses the conductor, insulation, cabling elements, individual screen, assembling of cable elements, overall screen, shielding, inner sheath, armour, and outer sheath. The conductor is typically copper and can be solid or multistranded. Insulation protects individual conductors and varies based on voltage rating. Screens and sheaths protect signals and the cable internally and externally. Requirements for the outer sheath include oxygen index, acid generation, smoke density, and flammability standards.
Pfisterer Rail - Connectors, Clamps, Compensating Devices, Insulators & Elect...
Pfisterer Rail - Connectors, Clamps, Compensating Devices, Insulators & Elect...Thorne & Derrick International
The document discusses components and systems for electrifying railway lines provided by PFISTERER Rail Systems. It describes various fittings such as clamps, insulators, and safety equipment used for connecting, suspending, and grounding contact wires, messenger wires, and feeder cables. It also highlights PFISTERER's patented TENSOREX spring-charged tensioning system, which uses coil springs to automatically maintain constant tension in catenary wires and cables despite temperature fluctuations.How To Determine MV-Connex Cable Connectors
The document is a form from Pfisterer for determining MV-CONNEX cable connectors. It requests information about the cable manufacturer, cable type, size, application, installation details, voltages, and cable design. The cable design section lists options for the conductor, insulation, conducting layers, screens, armorings, outer jacket, and remarks. It will be used to determine the appropriate cable connector for the specified cable.
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kVThorne & Derrick International
This document provides information on heat shrink joints for low voltage cables. It describes the components of the joints, which include adhesive lined tubes, armour cages, rings and clamps, and heat shrink tubes. The joints are intended for voltages up to 3.3kV and cable sizes ranging from 1.5mm2 to 630mm2. Part numbers are provided for single core and multicore joints for XLPE, PILC and transition cables. The joints are designed to meet industry standards and have an unlimited shelf life.Prysmian SIENOPYR-FR MI-VHH 2G625
This document provides technical specifications for Sienopyr-FR fiber optic cables intended for use on ships and offshore units. The cables have a nominal voltage of 300V, can operate between -35°C and 80°C, and have mechanical properties suitable for withstanding ship vibrations and bending radii down to 10 times the cable diameter. The document describes the cable design including its fiber optic, copper conductor, insulation, screening, and outer sheath materials. Electrical, thermal, transmission, and mechanical characteristics are specified.
LV & MV Hydrocarbon Resistant_cable_joints-
This document provides information on low voltage (LV) and medium voltage (MV) cable joints that are resistant to hydrocarbons.
It describes two ranges of joints - LV joints that use Prysmian's low hazard resin and rigid shells, and MV joints that use Prysmian's Elaspeed cold-shrink joint bodies for faster installation. Both LV and MV joints are enclosed in JEM resin and glass reinforced shells to provide excellent resistance to hydrocarbons.
The document provides specifications for various joint models including dimensions, compatible connectors, and cable size ranges for LV straight joints and MV Elaspeed straight joints for 11kV, 33kV applications.
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...Thorne & Derrick International
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
3M LO42 Cold Shrink Inline Joint Termination, Network Rail Approved
3M produces cold shrink joints and terminations for low voltage cables using prestretched tubes. The tubes are factory expanded and placed over cable connections or terminals, with a removable core inside. Removing the core allows the tube to shrink and provide a waterproof seal. The cold shrink kits can be used on various cable types rated from 0.6/1kV to 1.9/3.3kV, require no special tools or heat, and accommodate a wide range of cable sizes.
Pfisterer Sicon High Voltage Mechanical Shearbolt Connectors
The document describes a new type of cable connector called SICON that uses a stepless shear bolt. Key points:
1) SICON uses a stepless shear bolt that does not have predetermined breaking points, allowing it to achieve optimum clamping force for any conductor size.
2) Previous multi-stage shear bolts had breaking points that created discontinuities and did not allow maximum force. SICON's bolt breaks smoothly.
3) SICON provides up to 30% increased contact force on aluminum conductors compared to conventional connectors and ensures full utilization of the bolt's clamping ability.
Wirelock
The document provides information about Wirelock, a resin used to terminate wire ropes. It discusses Wirelock's specifications, such as its specific gravity of 1.73. It also describes how to use and store Wirelock properly, noting it should be kept between 10-24°C and used within 15 minutes of mixing at 18°C. The document lists Wirelock's approvals and specifications for different wire rope sizes.
Cable Spiker - Accles & Shelvoke
The Accles & Shelvoke Cable Spiker is a tool for safely de-energizing electric power cables before work is done on them. It can penetrate all types of cable coverings and is operated remotely via a lanyard for employee safety. If a live cable is spiked, the fault current will likely trip the circuit breaker without harming the tool. The Cable Spiker provides a safer alternative to manual spiking with hammers or sticks.
What's hot (19)
SPS Heat Shrink Terminations XLPE/SWA/PVC Cables 0.6/1kV
SPS Heat Shrink Terminations XLPE/SWA/PVC Cables 0.6/1kV
Nexans Euromold 180AR High Voltage Oil Insulated Bushing
Nexans Euromold 180AR High Voltage Oil Insulated Bushing
RAYCHEM TERMINATION KIT-TYCO TERMINATION-케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
RAYCHEM TERMINATION KIT-TYCO TERMINATION-케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
CMP PX2K-20S/16 Barrier Glands Exd Flameproof (ATEX) Cable Glands
CMP PX2K-20S/16 Barrier Glands Exd Flameproof (ATEX) Cable Glands
Heat Shrink Cable Joints - Low Voltage XLPE SWA 0.6kV-3.3kV SPS Heat Shrink J...
Heat Shrink Cable Joints - Low Voltage XLPE SWA 0.6kV-3.3kV SPS Heat Shrink J...
Pfisterer Rail - Connectors, Clamps, Compensating Devices, Insulators & Elect...
Pfisterer Rail - Connectors, Clamps, Compensating Devices, Insulators & Elect...
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...
3M LO42 Cold Shrink Inline Joint Termination, Network Rail Approved
3M LO42 Cold Shrink Inline Joint Termination, Network Rail Approved
Pfisterer Sicon High Voltage Mechanical Shearbolt Connectors
Pfisterer Sicon High Voltage Mechanical Shearbolt Connectors
Similar to Prysmian JBRCC Low Voltage Universal Cable Joint Kits
Prysmian JSTCC Low Voltage Universal Cable Joint Kits
JEM resin is used to make straight cable joints for low voltage cables with copper and aluminum conductors ranging from 1.5mm2 to 300mm2. The resin has a low viscosity, is moisture insensitive, and adheres well to cable materials. It is mixed in clear sachets and cured underwater if needed. Cable joint kits include transparent shells, mechanical connectors requiring no special tools, and armor bonds. They are tested and approved for joining low voltage SWA cables per various standards.
Prysmian JST Low Voltage Universal Cable Joint Kits
JST low voltage universal cable joint kits can be used for straight joints on SWA cables with copper or aluminum conductors ranging from 1.5mm2 to 400mm2. The kits include JEM resin, which has an extremely low viscosity allowing for void-free filling and enhanced adhesion. The transparent vacuum formed shells of the kits offer greater working dimensions and interlocking flange seals. The kits are tested and approved according to relevant standards and can be used with either compression or mechanical connectors.
Prysmian MPJEM Low Voltage LV Industrial Cable Joint Kits
The document describes MPJEM low voltage cable joint kits for joining copper conductor cables from 1.5mm2 to 400mm2. The kits feature a low hazard, isocyanate-free JEM resin for filling joints, transparent injection molded shells, and compatibility with common compression connectors. Technical specifications are provided for shell dimensions and selecting the appropriate joint based on cable configuration and conductor size.
Prysmian FRZHMB Low Voltage LV Fire Performance FP Cable Joint Kits
This document summarizes cable joint kits for fire performance cables with copper conductors ranging from 2.5mm2 to 120mm2. The kits contain low hazard resin, fire retardant joint shells, and meet fire resistance requirements of categories C, W, and Z. They are tested and approved according to relevant standards and provide fire resistance when exposed to flames, water spray, and mechanical shock. The document provides technical details on the resin, joint dimensions, performance ratings, and application guidelines.
Prysmian MPJEM-U Low Voltage LV Industrial Cable Joints For Unarmoured Cables
Prysmian MPJEM-U Low Voltage LV Industrial Cable Joints For Unarmoured CablesThorne & Derrick International
The document describes JEM cable joint kits for low voltage unarmored cables ranging from 1.5mm2 to 300mm2. The kits feature a low hazard isocyanate-free JEM resin for void-free filling and enhanced adhesion. They include transparent injection molded shells and are designed for use with compression connectors. Technical data provides specifications on shell dimensions, suitable joint references for different conductor sizes and numbers of cores, and compression connector references.Prysmian BICAST - LV Cable Joints Hydrocarbon Resistant for Oil, Gas, Petroch...
Prysmian BICAST - LV Cable Joints Hydrocarbon Resistant for Oil, Gas, Petroch...Thorne & Derrick International
This document provides information on low voltage and medium voltage hydrocarbon resistant cable joints for oil, gas, and petrochemical applications. It describes the resin encapsulation and shells that provide resistance to hydrocarbons. Details are given on straight joint designs and sizing for copper and aluminum conductor cables from 1.5mm2 to 500mm2 at voltages of 600/1000V, 11kV, and 33kV. Connector options and build up kits for joining cables of different sizes are also listed.Prysmian Cable Joint Kit - MPJEMJ5
This document provides information on MPJEM low voltage industrial cable joint kits that are used for straight joints on copper conductor cables from 1.5mm2 to 400mm2. The kits feature a low hazard resin that is easy to mix and extremely low viscosity for void-free filling. They include transparent injection molded shells and armor bonds. Technical data is provided on voltage rating, testing approval, resin properties, shell dimensions, joint references for common conductor sizes, and compatible compression connectors.
Prysmian Cable Joint Kit - MPJEMJ2
This document provides information on MPJEM low voltage industrial cable joint kits that are used for straight joints on copper conductor cables from 1.5mm2 to 400mm2. The kits feature a low hazard resin that is easy to mix and extremely low viscosity for void-free filling. They include transparent injection molded shells up to size 4 and vacuum formed clear shells for larger sizes. The kits are for joining low voltage polymeric insulated copper conductor cables to BS5467, BS6346 and IEC 502 standards.
Prysmian Cable Joint Kit - MPJEMJ6
This document provides information on MPJEM low voltage industrial cable joint kits that are used for straight joints on copper conductor cables from 1.5mm2 to 400mm2. The kits feature a low hazard resin that is easy to mix and extremely low viscosity for void-free filling. They include transparent injection molded shells up to size 4 and vacuum formed clear shells for larger sizes. The kits are for joining low voltage polymeric insulated copper conductor cables to BS5467, BS6346 and IEC 502 standards.
Prysmian Cable Joint Kit - MPJEMJ3
This document provides information on MPJEM low voltage industrial cable joint kits that are used for straight joints on copper conductor cables from 1.5mm2 to 400mm2. The kits feature a low hazard resin that is easy to mix and extremely low viscosity for void-free filling. They include transparent injection molded polypropylene shells or vacuum formed clear HIPS shells, as well as constant force spring armor bonds. Technical data and specifications are provided for joint sizing and selection based on cable configuration and conductor size.
Prysmian Cable Joint Kit - MPJEMJ8
This document provides information on MPJEM low voltage industrial cable joint kits that are used for straight joints on copper conductor cables from 1.5mm2 to 400mm2. The kits feature a low hazard resin that is easy to mix and extremely low viscosity for void-free filling. They include transparent injection molded shells up to size 4 and vacuum formed clear shells for larger sizes. The kits are for joining low voltage polymeric insulated copper conductor cables to BS5467, BS6346 and IEC 502 standards.
Prysmian Cable Joint Kit - MPJEMJ7
This document provides information on MPJEM low voltage industrial cable joint kits that are used for straight joints on copper conductor cables from 1.5mm2 to 400mm2. The kits feature a low hazard, isocyanate-free resin that is easy to mix and extremely low viscosity for void-free filling. They include transparent injection molded polypropylene shells or vacuum formed clear HIPS shells, as well as constant force spring armor bonds. Technical data and specifications are provided for joint sizing and compatible connectors.
Prysmian Cable Joint Kit - MPJEMJ4
This document provides information on MPJEM low voltage industrial cable joint kits that are used for straight joints on copper conductor cables from 1.5mm2 to 400mm2. The kits feature a low hazard, isocyanate-free resin that has low viscosity and enhanced adhesion. They include transparent injection molded polypropylene shells or vacuum formed clear HIPS shells, as well as constant force spring armour bonds. Technical data and specifications are provided for joint sizing and compatible connectors.
Prysmian Cable Joint Kit - MPJEMJ1
This document provides information on MPJEM low voltage industrial cable joint kits that are used for straight joints on copper conductor cables from 1.5mm2 to 400mm2. The kits feature a low hazard resin that is easy to mix and extremely low viscosity for void-free filling. They include transparent injection molded shells up to size 4 and vacuum formed clear shells for larger sizes. The kits are for joining low voltage polymeric insulated copper conductor cables to BS5467, BS6346 and IEC 502 standards.
Prysmian Afumex LSX Low Smoke Zero Halogen Cables
This document provides a datasheet and applications guide for AFUMEX LSX screened wiring cables. Some key benefits include being BASEC approved for compliance with BS8436 from 1.0mm2 to 2.5mm2, suitability for use in thin walls and partitions per clause 522.6 of the 17th Edition IEE Wiring Regulations, and independently assessed to pass nail penetration tests. The document provides information on construction, fire performance standards, applications, installation guidelines and current ratings.
PB Weir Substation Earth End Clamps - CE22-BESI-L2 & CE20-ESI-E1
This document provides information about portable earthing equipment for high voltage substations, including:
- It describes the various components of the portable earthing equipment such as earth end clamps, line end clamps, operating sockets, insulated operating poles, and earth leads.
- It explains the design and construction requirements for the equipment to meet safety standards, and provides technical details and specifications for each component.
- It provides guidance on selecting the appropriate equipment based on current rating requirements, and instructions for properly applying and maintaining the earthing equipment.
CTL CB0 Y Branch-Off Low Voltage Cable Joint
This document provides information on various resin cable joint kits for low voltage cables. It lists multiple product ranges for different cable types, including kits for PVC or XLPE cables, mines and quarries applications, cathodic protection joints, multicore control and pilot cables, multipair telecom cables, and special application LV cables. Each product listing provides the part number, cable sizes and cores it can accommodate.
Prysmian FRZHMPJ Low Voltage Fire Performance Cable Joint Kits
This document provides information on Prysmian's FRZHMPJ low voltage fire performance cable joint kits. The joints use a low hazard isocyanate-free JEM resin and rigid glass reinforced phenolic joint shells. They are suitable for copper conductor cables from 4mm2 to 400mm2 and meet the fire resistance requirements of BS6387 categories C, W and Z. Technical data is provided on the joints, including fire test results according to standards BS EN 50393, ENA ER C81 and BS 6387. Tables list the joint reference numbers for different core configurations and conductor sizes as well as compression connector part numbers.
3M LO41 Cold Shrink Cable Termination, Network Rail Approved
3M produces cold shrink joints and terminations for low voltage cables using prestretched tubes. The tubes are factory expanded and placed over cable connections or terminations. When the removable core is taken out, the tube shrinks to provide a waterproof seal without heat or special tools. 3M's LC series kits are suitable for sealing cables rated from 0.6/1kV to 1.9/3.3kV and accommodate a wide range of cable sizes through different kit options identified by code (e.g. LC1, LC2).
3M LA11 Cold Shrink Inline Joint 500-1000sqmm, Network Rail Approved
3M produces cold shrink joints and terminations for low voltage cables using prestretched tubes. The tubes are factory expanded and placed over cable connections or terminals, with a removable core inside. When the core is removed, the tube shrinks to provide a waterproof seal without heat or special tools. The document describes 3M's cold shrink splice kits for cables up to 3.3kV, including acceptable cable sizes and part numbers. It also lists additional cold shrink joint products for railway applications and higher voltage cables up to 6.6kV.
Similar to Prysmian JBRCC Low Voltage Universal Cable Joint Kits (20)
Prysmian JSTCC Low Voltage Universal Cable Joint Kits
Prysmian JSTCC Low Voltage Universal Cable Joint Kits
Prysmian JST Low Voltage Universal Cable Joint Kits
Prysmian JST Low Voltage Universal Cable Joint Kits
Prysmian MPJEM Low Voltage LV Industrial Cable Joint Kits
Prysmian MPJEM Low Voltage LV Industrial Cable Joint Kits
Prysmian FRZHMB Low Voltage LV Fire Performance FP Cable Joint Kits
Prysmian FRZHMB Low Voltage LV Fire Performance FP Cable Joint Kits
Prysmian MPJEM-U Low Voltage LV Industrial Cable Joints For Unarmoured Cables
Prysmian MPJEM-U Low Voltage LV Industrial Cable Joints For Unarmoured Cables
Prysmian BICAST - LV Cable Joints Hydrocarbon Resistant for Oil, Gas, Petroch...
Prysmian BICAST - LV Cable Joints Hydrocarbon Resistant for Oil, Gas, Petroch...
PB Weir Substation Earth End Clamps - CE22-BESI-L2 & CE20-ESI-E1
PB Weir Substation Earth End Clamps - CE22-BESI-L2 & CE20-ESI-E1
Prysmian FRZHMPJ Low Voltage Fire Performance Cable Joint Kits
Prysmian FRZHMPJ Low Voltage Fire Performance Cable Joint Kits
3M LO41 Cold Shrink Cable Termination, Network Rail Approved
3M LO41 Cold Shrink Cable Termination, Network Rail Approved
3M LA11 Cold Shrink Inline Joint 500-1000sqmm, Network Rail Approved
3M LA11 Cold Shrink Inline Joint 500-1000sqmm, Network Rail Approved
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Recently uploaded (20)
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Prysmian JBRCC Low Voltage Universal Cable Joint Kits
- 1. JEM Application Branch joints for LV cables with copper & aluminium conductors from 1.5mm² to 300mm² Features ● Low Hazard Isocynate free JEM resin - Twin Pack mixing in clear laminate sachets - Extremely low viscosity combined with enhanced adhesion ● Transparent vacuum formed shells which offer greater working dimensions & interlocking flange seals. ● Mechanical connectors that need no special tools whilst allowing good conductor range take. JBRCC Low Voltage Universal Cable Joint Kits (Mechanical Connectors Included)
- 2. Technical Data www.prysmian.co.uk JBRCC Low Voltage Universal Cable Joints > Low Voltage Branch Joints for 600/1000 Volt SWA cables to BS5467, BS6346 and IEC 502 - with Polymeric Insulation, aluminium or copper conductors. > Tested and approved to BS EN 50393 & ENA ER C81 > Includes Mechanical connectors (4 cores) requiring no special tooling and constant force spring Armour Bonds. > JEM Resin - Easier mixing in “Twin Pack” totally enclosed mixing in a clear laminate sachet. - Extremely low mix viscosity allows void free joint filling. - JEM Resin is insensitive to moisture and will cure under water. - Enhanced adhesion to XLPE, MDPE, PVC & lead. - High flash point, non-flammable liquid - No special storage or transport requirements. - Not classified as irritating to the skin or eyes. - Does not cause skin sensitization. Prysmian Cables & Systems Limited, Components Unit, Oak Road, Wrexham Industrial Estate, Wrexham, LL13 9PH Commercial Enquiries, Tel +44 (0) 845 767 8345, Fax +44 (0) 23 8029 5465Ref: JBRCC/01/11 Nominal Area of Conductor Two Core Ref. Three Core Ref. Four Core Ref. 1.5mm² JBR6CC JBR6CC JBR6CC 2.5mm² JBR6CC JBR6CC JBR6CC 4mm² JBR6CC JBR6CC JBR6CC 6mm² JBR6CC JBR6CC JBR6CC 10mm² JBR6CC JBR16CC JBR16CC 16mm² JBR16CC JBR16CC JBR16CC 25mm² JBR16CC JBR16CC JBR35CC 35mm² JBR35CC JBR35CC JBR35CC Nominal Area of Conductor Two Core Ref. Three Core Ref. Four Core Ref. 50mm² JBR95CC JBR95CC JBR95CC 70mm² JBR95CC JBR95CC JBR95CC 95mm² JBR95CC JBR95CC JBR95CC 120mm² JBR185CC JBR185CC JBR185CC 150mm² JBR185CC JBR185CC JBR185CC 185mm² JBR185CC JBR185CC JBR185CC 240mm² JBR300CC JBR300CC JBR300CC 300mm² JBR300CC JBR300CC JBR300CC Joint selection for 2, 3 and 4 core cables Shell Dimensions Dimensions (mm) Joint Ref. A B C Min. Box entry Ø ‘D’ Max. Box entry Ø ‘E’ JBR6CC 240 125 75 12 22 JBR16CC 345 160 95 20 35 JBR35CC 435 175 100 24 40 JBR95CC 650 210 190 27 51 JBR185CC 870 250 230 40 65 JBR300CC 1020 300 310 55 80