Prysmian FP Fire Resistant Cable Glands - BICC, BICON, Prysmian
•
1 like•8,263 views
The FP2520 cable gland is suitable for fire performance cables like FP200 Gold and FP Plus. It provides an easy fit for cables with outer diameters between 6-12mm. The gland is IP68 rated and available in red or white colors to match common cable jackets.
Report
Share
Report
Share
Download to read offline
Recommended
CMP Cable Glands - Hazardous Area Zones 1, 2, 21, 22 Flameproof (ATEX) Glands
CMP Cable Glands - Hazardous Area Zones 1, 2, 21, 22 Flameproof (ATEX) Glands Thorne & Derrick International
T&D distribute hazardous area (ATEX) flameproof cable glands to the oil, gas, petrochemical offshore and marine industries.
CMP flameproof cable glands (A2F, E1FW, E2FW, E1FX) with ATEX certification provide an inner and outer proof sheath seal with armour clamp for steel wire, steel tape, screened or braided cables and lead sheathed cables.
CMP flameproof cable glands are Dual Certified for Flameproof EEx d and Increased Safety EEx e methods of explosion protection - CMP Triton cable glands are deluge proof (submersible) and flameproof suitable for terminating SWA, STA and braided cables.
Hazardous area cable glands suit Zone 1, Zone 2, Zone 21 and Zone 22 with Dual Certification (Flameproof Type 'Ex d' and Increased Safety Type 'Ex e').
ATEX Certified Electrical Equipment for Hazardous Areas
ATEX is the name given to a set of European Directives relating to Hazardous Area Electrical Equipment Installations (Flammable Atmospheres) to avoid industrial accident or incident. ATEX Directive 94/9/EC (ATEX 95), is a directive adopted by the EU under the “New Approach” strategy.
The “New Approach” ATEX directive supersedes the “Old Approach” ATEX Directive, the Potentially Explosive Atmospheres Directive, 76/117/EEC – ATEX 94/9/EC (ATEX 95) facilitates free trade in the EC for hazardous area electrical equipment intended to be used in potentially explosive atmospheres. ATEX Directive 94/9/EC (ATEX 95) covers “Electrical Equipment” used in hazardous areas with potentially explosive atmospheres created by presence of gases, vapours, mists or dusts. T&D UK stock and distribute an extensive range of ATEX Certified Electrical Equipment for Hazardous Areas including cable glands, electrical enclosures, junction boxes, plugs and sockets, cable joints, control stations, cable transits, cable cleats, mobile phones, laptops, digital cameras, conduit systems, portable lighting (torches, handlamps, headlamps).
Flameproof Ex "d" Cable Glands - electrical equipment may include arcing and sparking (incendive) devices and flammable mixtures which may enter the enclosure or junction box. The cable gland design is specified to contain an internal explosion and prevent transmission of sufficient energy to ignite a potentially flammable atmosphere outside the enclosure or junction box.
Prysmian BICC BICON Cable Glands - Catalogue
This document provides an introduction and overview of Bicon cable glands manufactured by Prysmian Group. It discusses the company's extensive experience in producing cable glands and accessories and its comprehensive product ranges for both industrial and hazardous applications. The document includes sections on low smoke zero halogen materials, deluge testing, ingress protection indexing, and guides for selecting the appropriate industrial or hazardous area cable gland.
Prysmian Cable Glands Catalogue
This document provides an introduction and overview of Bicon cable glands manufactured by Prysmian Group. It discusses the company's expertise in cable glands spanning over 100 years. The document outlines the types of industrial and hazardous area cable glands available, including materials like brass, aluminum, and LSOH. Selection charts provide guidance on choosing the correct gland based on factors like cable type, diameter, location, and environment.
Prysmian Cable Cleats Catalogue
Prysmian Group is a worldwide leader in cables and accessories for power and telecommunications. They provide cable solutions to major organizations across industries. This document introduces their cable support and fixing systems product range, which includes cleats, joints, and other accessories. It describes the various cleat options for single cables or trefoil formations and notes approvals and testing conducted to rigorous standards. The product range and ordering information is then outlined to help customers select the appropriate cleat for their application and cable type.
Prysmian Offshore Cables - NEK606, IEC60092, BS6883, BS7197 Power & Control C...
Prysmian Offshore Cables - NEK606, IEC60092, BS6883, BS7197 Power & Control C...Thorne & Derrick International
Prysmian TechnergyTM Offshore cables provide integrated cabling solutions for offshore platforms that excel at performing under demanding conditions, preserving human safety, and protecting the environment. The cables have chemical resistant properties and fire safety features that promote longer operational lifetimes and increased safety. Prysmian offers a complete range of customized power and communication cables, as well as installation expertise, for all offshore networking needs.CMP Cable Glands - Industrial, Hazardous Area & High Voltage
CMP Products is a leading specialist manufacturer of Cable Glands, Cable Connectors and associated accessories, used extensively for power, control, lighting and instrumentation cable applications in connection with IEC and NEC cables.
Having the widest portfolio of Cable Gland products to meet every kind of situation imaginable, CMP offers a variety of solutions for use in Marine, Explosive and Non Explosive (Industrial) Atmospheres, for a large selection of cable types. The product search page of the website includes a number of the typical industry standard cable types found around the world that CMP cable glands can be associated with.
CMP design and produce Cable Glands with Ex d/Ex e Zone 1, Zone 2, Zone 21 & Zone 22 Approvals for use in Gas Group IIC environments under CENELEC & IEC Area Classification rules. Additionally Cable Connectors for NEC Classified Explosive Atmospheres Locations, are available for Class I, II & III, Divisions 1 & 2, where Gas Groups A, B, C, D and Dust Groups E, F & G are present.
International Explosive Atmospheres Approvals are held from SIRA, CEPEL/Inmetro, CSA, UL, GOST, NEPSI, TUV, and CIDET. In addition Marine Classification Society Approvals from Lloyds, DNV & ABS are also held.
CMP flameproof cable glands (A2F, E1FW, E2FW, E1FX) with ATEX certification provide an inner and outer proof sheath seal with armour clamp for steel wire, steel tape, screened or braided cables and lead sheathed cables.
CMP flameproof cable glands are Dual Certified for Flameproof EEx d and Increased Safety EEx e methods of explosion protection - CMP Triton cable glands are deluge proof (submersible) and flameproof suitable for terminating SWA, STA and braided cables.
Hazardous area cable glands suit Zone 1, Zone 2, Zone 21 and Zone 22 with Dual Certification (Flameproof Type 'Ex d' and Increased Safety Type 'Ex e').
M25 Conduit ATEX & Flameproof EXD Barrier Glands Zone 1 & Zone 2 Hazardous Areas
M25 Conduit ATEX & Flameproof EXD Barrier Glands Zone 1 & Zone 2 Hazardous AreasThorne & Derrick International
The document describes a flameproof barrier gland for use with flexible conduit systems. It has nickel plated brass construction with a compound barrier seal. It can be used in hazardous zones 1, 2, 21, and 22. It has IP66-IP69K ratings for indoor and outdoor use from -60°C to +85°C. It connects various liquid tight flexible conduits for applications in petrochemical plants, refineries, and other industries.Pipeline Oil & Gas Magazine - October 2014 Thorne & Derrick Editorial
Thorne & Derrick UK is a leading procurement specialist that has served the global oil and gas industry for over 30 years. It provides over 50,000 products from 1,000 categories to customers in industries such as utilities, power, construction, rail, mining, offshore, and petrochemicals. A key recent highlight was extending its distribution agreement with R Stahl to provide entire customized hazardous area systems and solutions.
Recommended
CMP Cable Glands - Hazardous Area Zones 1, 2, 21, 22 Flameproof (ATEX) Glands
CMP Cable Glands - Hazardous Area Zones 1, 2, 21, 22 Flameproof (ATEX) Glands Thorne & Derrick International
T&D distribute hazardous area (ATEX) flameproof cable glands to the oil, gas, petrochemical offshore and marine industries.
CMP flameproof cable glands (A2F, E1FW, E2FW, E1FX) with ATEX certification provide an inner and outer proof sheath seal with armour clamp for steel wire, steel tape, screened or braided cables and lead sheathed cables.
CMP flameproof cable glands are Dual Certified for Flameproof EEx d and Increased Safety EEx e methods of explosion protection - CMP Triton cable glands are deluge proof (submersible) and flameproof suitable for terminating SWA, STA and braided cables.
Hazardous area cable glands suit Zone 1, Zone 2, Zone 21 and Zone 22 with Dual Certification (Flameproof Type 'Ex d' and Increased Safety Type 'Ex e').
ATEX Certified Electrical Equipment for Hazardous Areas
ATEX is the name given to a set of European Directives relating to Hazardous Area Electrical Equipment Installations (Flammable Atmospheres) to avoid industrial accident or incident. ATEX Directive 94/9/EC (ATEX 95), is a directive adopted by the EU under the “New Approach” strategy.
The “New Approach” ATEX directive supersedes the “Old Approach” ATEX Directive, the Potentially Explosive Atmospheres Directive, 76/117/EEC – ATEX 94/9/EC (ATEX 95) facilitates free trade in the EC for hazardous area electrical equipment intended to be used in potentially explosive atmospheres. ATEX Directive 94/9/EC (ATEX 95) covers “Electrical Equipment” used in hazardous areas with potentially explosive atmospheres created by presence of gases, vapours, mists or dusts. T&D UK stock and distribute an extensive range of ATEX Certified Electrical Equipment for Hazardous Areas including cable glands, electrical enclosures, junction boxes, plugs and sockets, cable joints, control stations, cable transits, cable cleats, mobile phones, laptops, digital cameras, conduit systems, portable lighting (torches, handlamps, headlamps).
Flameproof Ex "d" Cable Glands - electrical equipment may include arcing and sparking (incendive) devices and flammable mixtures which may enter the enclosure or junction box. The cable gland design is specified to contain an internal explosion and prevent transmission of sufficient energy to ignite a potentially flammable atmosphere outside the enclosure or junction box.
Prysmian BICC BICON Cable Glands - Catalogue
This document provides an introduction and overview of Bicon cable glands manufactured by Prysmian Group. It discusses the company's extensive experience in producing cable glands and accessories and its comprehensive product ranges for both industrial and hazardous applications. The document includes sections on low smoke zero halogen materials, deluge testing, ingress protection indexing, and guides for selecting the appropriate industrial or hazardous area cable gland.
Prysmian Cable Glands Catalogue
This document provides an introduction and overview of Bicon cable glands manufactured by Prysmian Group. It discusses the company's expertise in cable glands spanning over 100 years. The document outlines the types of industrial and hazardous area cable glands available, including materials like brass, aluminum, and LSOH. Selection charts provide guidance on choosing the correct gland based on factors like cable type, diameter, location, and environment.
Prysmian Cable Cleats Catalogue
Prysmian Group is a worldwide leader in cables and accessories for power and telecommunications. They provide cable solutions to major organizations across industries. This document introduces their cable support and fixing systems product range, which includes cleats, joints, and other accessories. It describes the various cleat options for single cables or trefoil formations and notes approvals and testing conducted to rigorous standards. The product range and ordering information is then outlined to help customers select the appropriate cleat for their application and cable type.
Prysmian Offshore Cables - NEK606, IEC60092, BS6883, BS7197 Power & Control C...
Prysmian Offshore Cables - NEK606, IEC60092, BS6883, BS7197 Power & Control C...Thorne & Derrick International
Prysmian TechnergyTM Offshore cables provide integrated cabling solutions for offshore platforms that excel at performing under demanding conditions, preserving human safety, and protecting the environment. The cables have chemical resistant properties and fire safety features that promote longer operational lifetimes and increased safety. Prysmian offers a complete range of customized power and communication cables, as well as installation expertise, for all offshore networking needs.CMP Cable Glands - Industrial, Hazardous Area & High Voltage
CMP Products is a leading specialist manufacturer of Cable Glands, Cable Connectors and associated accessories, used extensively for power, control, lighting and instrumentation cable applications in connection with IEC and NEC cables.
Having the widest portfolio of Cable Gland products to meet every kind of situation imaginable, CMP offers a variety of solutions for use in Marine, Explosive and Non Explosive (Industrial) Atmospheres, for a large selection of cable types. The product search page of the website includes a number of the typical industry standard cable types found around the world that CMP cable glands can be associated with.
CMP design and produce Cable Glands with Ex d/Ex e Zone 1, Zone 2, Zone 21 & Zone 22 Approvals for use in Gas Group IIC environments under CENELEC & IEC Area Classification rules. Additionally Cable Connectors for NEC Classified Explosive Atmospheres Locations, are available for Class I, II & III, Divisions 1 & 2, where Gas Groups A, B, C, D and Dust Groups E, F & G are present.
International Explosive Atmospheres Approvals are held from SIRA, CEPEL/Inmetro, CSA, UL, GOST, NEPSI, TUV, and CIDET. In addition Marine Classification Society Approvals from Lloyds, DNV & ABS are also held.
CMP flameproof cable glands (A2F, E1FW, E2FW, E1FX) with ATEX certification provide an inner and outer proof sheath seal with armour clamp for steel wire, steel tape, screened or braided cables and lead sheathed cables.
CMP flameproof cable glands are Dual Certified for Flameproof EEx d and Increased Safety EEx e methods of explosion protection - CMP Triton cable glands are deluge proof (submersible) and flameproof suitable for terminating SWA, STA and braided cables.
Hazardous area cable glands suit Zone 1, Zone 2, Zone 21 and Zone 22 with Dual Certification (Flameproof Type 'Ex d' and Increased Safety Type 'Ex e').
M25 Conduit ATEX & Flameproof EXD Barrier Glands Zone 1 & Zone 2 Hazardous Areas
M25 Conduit ATEX & Flameproof EXD Barrier Glands Zone 1 & Zone 2 Hazardous AreasThorne & Derrick International
The document describes a flameproof barrier gland for use with flexible conduit systems. It has nickel plated brass construction with a compound barrier seal. It can be used in hazardous zones 1, 2, 21, and 22. It has IP66-IP69K ratings for indoor and outdoor use from -60°C to +85°C. It connects various liquid tight flexible conduits for applications in petrochemical plants, refineries, and other industries.Pipeline Oil & Gas Magazine - October 2014 Thorne & Derrick Editorial
Thorne & Derrick UK is a leading procurement specialist that has served the global oil and gas industry for over 30 years. It provides over 50,000 products from 1,000 categories to customers in industries such as utilities, power, construction, rail, mining, offshore, and petrochemicals. A key recent highlight was extending its distribution agreement with R Stahl to provide entire customized hazardous area systems and solutions.
Prysmian High Voltage Polymeric Cables - SF6 Immersed Sealing Ends
Prysmian provides a complete range of gas insulated switchgear (GIS) terminations for direct connection to cable systems. Their stress cone technology encases cable ends in an epoxy resin insulator positioned inside the GIS enclosure. Prysmian has extensive experience developing both dry and wet termination designs for worldwide transformer manufacturers. They can also provide customized solutions for non-standard GIS enclosures and plug-in terminations.
Prysmian A220SS 423LSF-71 (3.5-8.5mm) LSF Brass BICON Gland Kits
This document provides information on an A1/A2 LSOH Gland Kit for securing low smoke zero halogen (LSOH) unarmored cables. The kit includes a brass gland, locknut, and LSOH shroud for cables between 3.5-67mm in diameter. It is suitable for indoor and outdoor use in most climatic conditions and is waterproof. The kit complies with various industry standards and has approval for underground installation in subway systems.
Prysmian HV Cables, Joints & Terminations - 66kV 132kV
This document provides information on Prysmian's high voltage (HV) product range, including cables and accessories for 66kV, 132kV, and other voltages. It details cable constructions, available conductor sizes, fault current ratings, and accessories. Prysmian has experience supplying and installing HV cable systems worldwide and provides design, installation, and after-sales support services. The document includes product information sheets on cable types, accessories, joints, link boxes, and bonding/earthing equipment.
Kingsmill - Copper Earthing, Surge Protection & Lightning Protection
Kingsmill Industries (UK) Ltd is a leading manufacturer and distributor of earthing and lightning protection products in the UK and export markets. The company aims to provide high quality products and excellent customer service without compromising on price. All products are manufactured according to British and international standards like BS EN 62305, BS EN 50164, and BS 7430. The catalog provides information on Kingsmill's wide range of earthing and lightning protection products and components. Recent projects utilizing Kingsmill products include restoring the lightning protection system on the historic Jessops Monument tower and supplying materials for international projects in Ireland, Syria, and other locations.
RFS GKFORM60-158
The document provides information about the RFS GKFORM60-158 Grounding Kit. It is a pre-formed copper strap that is 1.5 meters long for grounding CELLFLEX 1-5/8" coaxial cable. It has been tested to withstand lightning currents over 100kA. The kit includes a 6 AWG copper wire, mastic, and tape for weatherproofing. It is compatible with both copper and aluminum cable types.
Panduit Lockout Tagout Electrical Safety Catalogue
The document describes lockout/tagout products from Panduit including training kits, videos and materials to help companies comply with OSHA regulations. It lists various lockout devices such as circuit breaker locks, plug locks, and padlock kits that securely lock out energy sources during equipment service and repair. Contact information is provided for technical support.
SEB - Cable Pulling & Cable Laying Equipment For Low & High Voltage Cables In...
SEB - Cable Pulling & Cable Laying Equipment For Low & High Voltage Cables In...Thorne & Derrick International
SEB Cable Laying & Cable Pulling Equipment enables the installation of LV-HV power, fibre optic, telecoms, subsea cables and umbilicals into cable duct or cable trench.
T&D service utilities, power, construction, rail, mining, street lighting, subsea, offshore, oil, gas and petrochemical industries with global market leading SEB Cable Laying & Cable Pulling Equipment.
T&D distribute the complete range of SEB Cable Pulling and Cable Laying Equipment for low and high voltage (LV-HV) power cable installations into underground trench or cable duct - this includes XLPE, PILC, EPR, waveform, service cables, triplex, 11kV, 33kV, EHV, fibre optic, telecoms and street lighting cables. We supply cable rollers, cable socks, cable jacks, drum trailers, cable pulling lubricant, underground cable protection (Stokbord & Tape Tile Cable Covers) and conduit duct rod - we service the utility cable laying contractor, electrical contractor and export markets.
SEB Cable Laying Solutions for Renewable Energy Projects
A comprehensive cable laying package includes cable rollers (straight and corner), cable drum jacks, cable winches and cable socks including stainless steel socks for pulling large diameter, high voltage subsea power cables and umbilicals up to 400kV.
Axon ffc flat-cables
This document provides information about Axon Cable's flat flexible cables and flat cable assemblies. It discusses their flat flexible cables (AXOJUMP), flat cables with round pins (AXOSTRIP), bulk flat cables (FLEXLINK), flat display connections (AXOLINK), and flat display connections for high speed transmission (FDC 100). It provides details on specifications, applications, advantages, production, quality assurance, and connection methods. Axon Cable offers a comprehensive range of flat cable products and custom assembly designs to meet various application needs.
RFS GKFORM60-58
This document provides information about the RFS GKFORM60-58 Grounding Kit. It is a standard grounding kit for 5/8" CELLFLEX coaxial cable that features a pre-formed tin-plated copper strap to properly attach the cable to ground and withstand lightning currents. The kit includes a 6-AWG copper wire, mastic, and electrical tape. It is compatible with both copper and aluminum cable types.
RFS FD9R6004/1C-3L
This document provides product information and instructions for purchasing an RFS FD9R6004/1C-3L ShareLite Wideband Diplexer. It includes details on the product's specifications, features, applications, frequency ranges, connectors, dimensions, and warranty. It also provides contact information for placing orders and inquiries.
Everest Cables And Connectors Private Limited, Delhi
Everest Cables And Connectors Private Limited, DelhiTradeIndia, B2B, B2C, at A-86 Okhla - 2 New Delhi, India
Everest Cables And Connectors Private Limited, Delhi, India
Started to create milestones, we Everest Cables And Connectors Private Limited marked our presence in the year 1965 and operates in the manufacturing/servicing of Everest LAN Cables, Radio Coaxial Cables, Data Cables, Alarm Cables, Wire Harness Assemblies since 47 years. Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of Everest LAN Cables, Radio Coaxial Cables, Data Cables, Alarm Cables, Wire Harness Assemblies, LAN Cables that has made us to deepen our roots in the market.
Get more details visit us : http://www.everestcables.co.in
2014 Kingsmill Product Catalogue (Edition 6)
This document is a product catalogue from Kingsmill Industries, a leading manufacturer of earthing and lightning protection products in the UK. It includes information on their company background and commitment to standards like BS EN 62305, BS EN 50164, and BS 7430. The catalogue consists of specifications, drawings and data on their various products, which range from earth rods and plates to conductors, connectors, and surge protection devices. It provides contact details for ordering and notes their technical testing meets ISO 9001 standards for quality assurance.
Profi bus DATA SHEET
The document provides information on Profibus fieldbus connectors:
- The connectors are available in aluminum and stainless steel housings for connecting 1-8 measuring devices to a Profibus trunk line via spur lines.
- They feature tension clamp connection technology, overvoltage protection, fusing for individual spur lines, EMC cable glands, and M12 connectors.
- Variants are available for Profibus-DP and Profibus-PA networks with different technical specifications and connection options.
- Accessories and ordering information is provided for the Profibus connectors.
Platform touch voltage protection membrane system and other railways buildin...
We are now experience witness of Metro Rails Project in India &travelling by Metro RIDERS increasing&this is another comforts shorts distance travelling for Official&Personal Trip.
Electrical Safety&Lots of Building Automaton&Networking involve to ensure Fast ,Smooth&Hassall Free Travelling for Passenger Like Automation of Ticket&Smart Card,Lifts&Escalators, Message Display ,Public Announcement ,Free Wi-fi , CCTV,Fire Alarm, Access Controls, Security Systems, Platform Screen Door. LED Lighting , Air Ventilation&Conditioning, Publicity&Refreshment Counters Now Offering Shuttles Road Transportation Electric Vehicles&Electric Vehicle Charging Infra.
Power for Traction&Building form Substation 33KV to 25KV for Traction&11KV for Building Power is established with Support Solar PV &High Energy Storage Battery System to Untrip Power 24X7.
Electrical Safety is very essential&Mandatory as per NBC2016 which take care of 440V AC Power running to power each and every equipment's. Earthing for Buildings, Traffic, Signal &Telecom design as per IEEE80 ,IS3043&Touch &Step Potential Voltage should be with in Limit for Safety of Person Operating Metro also for Metro Rider against Direct or Indirect shock.
Lightning&Surge Protection for all Power Data&Communication Write us LinkVue System Pvt Ltd
Upcom product overview 2018 www.upcom.com.tr
Fiber optic cables, copper cables, rack cabinets and fiber optic connectivity products. including tight buffer, loose tube cables. CPR certified, euro class.
Emtelle PowerProtect Cable Duct Systems, Class 1 33kV
Emtelle produces duct systems for underground power cables that can withstand high compression forces at elevated temperatures. Their comprehensive product range includes solid wall uPVC and HDPE duct systems designed to meet stringent demands for establishing power networks and accommodate new high temperature cables. Emtelle works closely with clients from project start to provide expertise on specification and installation of their duct systems.
Polypipe - LV & HV Underground Power Cable Ducting & Cable Protection
This document provides information on Polypipe's cable protection systems for motorway communications applications. It describes Ridgiduct comms ducting in 94mm, 100mm, and 150mm sizes which is certified as a sealed system to BS EN 61386-24 and MCHW 1530 standards. The Ridgiduct comms duct is available in 6 and 9 meter lengths with couplers and seals to connect lengths and make the system waterproof. It conforms to Highways Agency specifications for sealed cable protection on motorways.
Hellermann Tyton - Cable Ties, Fixings & Stainless Steel Cable Ties
Hellermann Tyton stainless steel cable ties include MLT, MBT and MAT ranges for long term cable bunding of low and high voltage cables in industrial and hazardous areas.
Hellermann Tyton MBT (Metal Ball Bearing) stainless steel cable ties have a non-releasable locking mechanism in grade 304 and 316 stainless steel. The MBT range of stainless steel cable ties are suitable for use in arduous conditions or where additional security, strength, fire resistance and chemical resistance is required. MBT cable ties have a patented non-releasable locking feature and offer infinite adjustment within their length. Hellermann Tyton MBT FC cable ties have fully coated straps on the tie for extra cable protection and corrosion resistance on the overall installation to metal cable trays.
Hellermann Tyton MAT stainless steel cable ties feature a ratchet type design and are available in 316 stainless steel. MAT stainless steel cable ties can be used in the most arduous of conditions or where the additional security, strength and fire resistance of a metal fixing is required. Hellermann Tyton MAT stainless steel cable ties can be put on in stages (locking in the strip).
Hellermann Tyton MLT 316 stainless steel cable ties are reuseable - MLT cable ties incorporate a ‘buckle’ type locking mechanism. They are a heavy duty type of cable tie but they can be opened and re-used if required. The MLT product range is available in both coated and un-coated stainless steel cable tie versions. MLT cable ties are simple to install either by hand or with a tensioning tool and once installed they offer an extremely secure method of cable bundling. Manufactured from 316 stainless steel MLT cable ties are tough, corrosion resistant with a temperature range from -80° C to +538° C.
Hellermann Tyton stainless steel cable ties are used in mass transit, ship building, oil rigs, hazardous areas, mining, petrochemicals and rail industries. All MBT Hellermann Tyton Stainless Steel Cable Ties have full LUL (London Underground & TfL) approval (Standard 1-085, Product Register No: 2002).
Panduit Cable Ties & Accerssories
This document provides an overview of electrical solutions offered by Panduit, including:
1) Cable ties in various styles, materials, and sizes for bundling, mounting, and identifying cables.
2) Cable accessories like wiring ducts, raceways, abrasion protection, and cable management products.
3) Connectors for terminals, power, and grounding applications.
4) Labeling systems, markers, and lockout/tagout safety solutions.
The document describes Panduit's extensive line of cable ties and provides charts for selecting the appropriate tie for an application based on required functions, material properties, and performance needs.
Product Catalogue 2015
Optifab International is a leading UK fibre optic manufacturer and supplier based in Milton Keynes. They specialize in manufacturing fibre optic communication and networking products for bespoke and general optical applications. Their product range includes passive infrastructure, active categories like FTTH, patch cords, pigtails, MPO/MTP solutions, pre-terminated fibre, cable, panels, closures, splitters, wall boxes, and test equipment. Optifab aims to provide cost-effective and reliable solutions to clients in different industries.
CW LSF Brass Cable Glands - Prysmian BICC BICON 422LSF NEW
This document provides specifications for a CW LSOH Gland Kit that includes brass glands, earth tags, locknuts, and shrouds for securing low smoke zero halogen (LSOH) cables. The kit is suitable for indoor and outdoor use with galvanized steel or plastic/rubber sheathed LSOH cables in most climatic conditions. It has three-part armor locking and meets fire performance standards with approval from London Underground for subsurface installations. Specifications include kit contents and dimensions, material information, temperature rating, compliance standards, and manufacturer details.
Prysmian CW LSF Brass Cable Glands - BICC, BICON, Prysmian
The CW LSOH Brass Gland Kit is an indoor/outdoor cable gland for securing single-wire-armored cables. It consists of a brass gland, brass earth tag, brass locknut, and silicone shroud. The kit is rated for IP66 protection and operates in temperatures from -20°C to +90°C. It is suitable for cables up to 75mm and made from corrosion-resistant brass alloy.
More Related Content
What's hot
Prysmian High Voltage Polymeric Cables - SF6 Immersed Sealing Ends
Prysmian provides a complete range of gas insulated switchgear (GIS) terminations for direct connection to cable systems. Their stress cone technology encases cable ends in an epoxy resin insulator positioned inside the GIS enclosure. Prysmian has extensive experience developing both dry and wet termination designs for worldwide transformer manufacturers. They can also provide customized solutions for non-standard GIS enclosures and plug-in terminations.
Prysmian A220SS 423LSF-71 (3.5-8.5mm) LSF Brass BICON Gland Kits
This document provides information on an A1/A2 LSOH Gland Kit for securing low smoke zero halogen (LSOH) unarmored cables. The kit includes a brass gland, locknut, and LSOH shroud for cables between 3.5-67mm in diameter. It is suitable for indoor and outdoor use in most climatic conditions and is waterproof. The kit complies with various industry standards and has approval for underground installation in subway systems.
Prysmian HV Cables, Joints & Terminations - 66kV 132kV
This document provides information on Prysmian's high voltage (HV) product range, including cables and accessories for 66kV, 132kV, and other voltages. It details cable constructions, available conductor sizes, fault current ratings, and accessories. Prysmian has experience supplying and installing HV cable systems worldwide and provides design, installation, and after-sales support services. The document includes product information sheets on cable types, accessories, joints, link boxes, and bonding/earthing equipment.
Kingsmill - Copper Earthing, Surge Protection & Lightning Protection
Kingsmill Industries (UK) Ltd is a leading manufacturer and distributor of earthing and lightning protection products in the UK and export markets. The company aims to provide high quality products and excellent customer service without compromising on price. All products are manufactured according to British and international standards like BS EN 62305, BS EN 50164, and BS 7430. The catalog provides information on Kingsmill's wide range of earthing and lightning protection products and components. Recent projects utilizing Kingsmill products include restoring the lightning protection system on the historic Jessops Monument tower and supplying materials for international projects in Ireland, Syria, and other locations.
RFS GKFORM60-158
The document provides information about the RFS GKFORM60-158 Grounding Kit. It is a pre-formed copper strap that is 1.5 meters long for grounding CELLFLEX 1-5/8" coaxial cable. It has been tested to withstand lightning currents over 100kA. The kit includes a 6 AWG copper wire, mastic, and tape for weatherproofing. It is compatible with both copper and aluminum cable types.
Panduit Lockout Tagout Electrical Safety Catalogue
The document describes lockout/tagout products from Panduit including training kits, videos and materials to help companies comply with OSHA regulations. It lists various lockout devices such as circuit breaker locks, plug locks, and padlock kits that securely lock out energy sources during equipment service and repair. Contact information is provided for technical support.
SEB - Cable Pulling & Cable Laying Equipment For Low & High Voltage Cables In...
SEB - Cable Pulling & Cable Laying Equipment For Low & High Voltage Cables In...Thorne & Derrick International
SEB Cable Laying & Cable Pulling Equipment enables the installation of LV-HV power, fibre optic, telecoms, subsea cables and umbilicals into cable duct or cable trench.
T&D service utilities, power, construction, rail, mining, street lighting, subsea, offshore, oil, gas and petrochemical industries with global market leading SEB Cable Laying & Cable Pulling Equipment.
T&D distribute the complete range of SEB Cable Pulling and Cable Laying Equipment for low and high voltage (LV-HV) power cable installations into underground trench or cable duct - this includes XLPE, PILC, EPR, waveform, service cables, triplex, 11kV, 33kV, EHV, fibre optic, telecoms and street lighting cables. We supply cable rollers, cable socks, cable jacks, drum trailers, cable pulling lubricant, underground cable protection (Stokbord & Tape Tile Cable Covers) and conduit duct rod - we service the utility cable laying contractor, electrical contractor and export markets.
SEB Cable Laying Solutions for Renewable Energy Projects
A comprehensive cable laying package includes cable rollers (straight and corner), cable drum jacks, cable winches and cable socks including stainless steel socks for pulling large diameter, high voltage subsea power cables and umbilicals up to 400kV.
Axon ffc flat-cables
This document provides information about Axon Cable's flat flexible cables and flat cable assemblies. It discusses their flat flexible cables (AXOJUMP), flat cables with round pins (AXOSTRIP), bulk flat cables (FLEXLINK), flat display connections (AXOLINK), and flat display connections for high speed transmission (FDC 100). It provides details on specifications, applications, advantages, production, quality assurance, and connection methods. Axon Cable offers a comprehensive range of flat cable products and custom assembly designs to meet various application needs.
RFS GKFORM60-58
This document provides information about the RFS GKFORM60-58 Grounding Kit. It is a standard grounding kit for 5/8" CELLFLEX coaxial cable that features a pre-formed tin-plated copper strap to properly attach the cable to ground and withstand lightning currents. The kit includes a 6-AWG copper wire, mastic, and electrical tape. It is compatible with both copper and aluminum cable types.
RFS FD9R6004/1C-3L
This document provides product information and instructions for purchasing an RFS FD9R6004/1C-3L ShareLite Wideband Diplexer. It includes details on the product's specifications, features, applications, frequency ranges, connectors, dimensions, and warranty. It also provides contact information for placing orders and inquiries.
Everest Cables And Connectors Private Limited, Delhi
Everest Cables And Connectors Private Limited, DelhiTradeIndia, B2B, B2C, at A-86 Okhla - 2 New Delhi, India
Everest Cables And Connectors Private Limited, Delhi, India
Started to create milestones, we Everest Cables And Connectors Private Limited marked our presence in the year 1965 and operates in the manufacturing/servicing of Everest LAN Cables, Radio Coaxial Cables, Data Cables, Alarm Cables, Wire Harness Assemblies since 47 years. Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of Everest LAN Cables, Radio Coaxial Cables, Data Cables, Alarm Cables, Wire Harness Assemblies, LAN Cables that has made us to deepen our roots in the market.
Get more details visit us : http://www.everestcables.co.in
2014 Kingsmill Product Catalogue (Edition 6)
This document is a product catalogue from Kingsmill Industries, a leading manufacturer of earthing and lightning protection products in the UK. It includes information on their company background and commitment to standards like BS EN 62305, BS EN 50164, and BS 7430. The catalogue consists of specifications, drawings and data on their various products, which range from earth rods and plates to conductors, connectors, and surge protection devices. It provides contact details for ordering and notes their technical testing meets ISO 9001 standards for quality assurance.
Profi bus DATA SHEET
The document provides information on Profibus fieldbus connectors:
- The connectors are available in aluminum and stainless steel housings for connecting 1-8 measuring devices to a Profibus trunk line via spur lines.
- They feature tension clamp connection technology, overvoltage protection, fusing for individual spur lines, EMC cable glands, and M12 connectors.
- Variants are available for Profibus-DP and Profibus-PA networks with different technical specifications and connection options.
- Accessories and ordering information is provided for the Profibus connectors.
Platform touch voltage protection membrane system and other railways buildin...
We are now experience witness of Metro Rails Project in India &travelling by Metro RIDERS increasing&this is another comforts shorts distance travelling for Official&Personal Trip.
Electrical Safety&Lots of Building Automaton&Networking involve to ensure Fast ,Smooth&Hassall Free Travelling for Passenger Like Automation of Ticket&Smart Card,Lifts&Escalators, Message Display ,Public Announcement ,Free Wi-fi , CCTV,Fire Alarm, Access Controls, Security Systems, Platform Screen Door. LED Lighting , Air Ventilation&Conditioning, Publicity&Refreshment Counters Now Offering Shuttles Road Transportation Electric Vehicles&Electric Vehicle Charging Infra.
Power for Traction&Building form Substation 33KV to 25KV for Traction&11KV for Building Power is established with Support Solar PV &High Energy Storage Battery System to Untrip Power 24X7.
Electrical Safety is very essential&Mandatory as per NBC2016 which take care of 440V AC Power running to power each and every equipment's. Earthing for Buildings, Traffic, Signal &Telecom design as per IEEE80 ,IS3043&Touch &Step Potential Voltage should be with in Limit for Safety of Person Operating Metro also for Metro Rider against Direct or Indirect shock.
Lightning&Surge Protection for all Power Data&Communication Write us LinkVue System Pvt Ltd
Upcom product overview 2018 www.upcom.com.tr
Fiber optic cables, copper cables, rack cabinets and fiber optic connectivity products. including tight buffer, loose tube cables. CPR certified, euro class.
Emtelle PowerProtect Cable Duct Systems, Class 1 33kV
Emtelle produces duct systems for underground power cables that can withstand high compression forces at elevated temperatures. Their comprehensive product range includes solid wall uPVC and HDPE duct systems designed to meet stringent demands for establishing power networks and accommodate new high temperature cables. Emtelle works closely with clients from project start to provide expertise on specification and installation of their duct systems.
Polypipe - LV & HV Underground Power Cable Ducting & Cable Protection
This document provides information on Polypipe's cable protection systems for motorway communications applications. It describes Ridgiduct comms ducting in 94mm, 100mm, and 150mm sizes which is certified as a sealed system to BS EN 61386-24 and MCHW 1530 standards. The Ridgiduct comms duct is available in 6 and 9 meter lengths with couplers and seals to connect lengths and make the system waterproof. It conforms to Highways Agency specifications for sealed cable protection on motorways.
Hellermann Tyton - Cable Ties, Fixings & Stainless Steel Cable Ties
Hellermann Tyton stainless steel cable ties include MLT, MBT and MAT ranges for long term cable bunding of low and high voltage cables in industrial and hazardous areas.
Hellermann Tyton MBT (Metal Ball Bearing) stainless steel cable ties have a non-releasable locking mechanism in grade 304 and 316 stainless steel. The MBT range of stainless steel cable ties are suitable for use in arduous conditions or where additional security, strength, fire resistance and chemical resistance is required. MBT cable ties have a patented non-releasable locking feature and offer infinite adjustment within their length. Hellermann Tyton MBT FC cable ties have fully coated straps on the tie for extra cable protection and corrosion resistance on the overall installation to metal cable trays.
Hellermann Tyton MAT stainless steel cable ties feature a ratchet type design and are available in 316 stainless steel. MAT stainless steel cable ties can be used in the most arduous of conditions or where the additional security, strength and fire resistance of a metal fixing is required. Hellermann Tyton MAT stainless steel cable ties can be put on in stages (locking in the strip).
Hellermann Tyton MLT 316 stainless steel cable ties are reuseable - MLT cable ties incorporate a ‘buckle’ type locking mechanism. They are a heavy duty type of cable tie but they can be opened and re-used if required. The MLT product range is available in both coated and un-coated stainless steel cable tie versions. MLT cable ties are simple to install either by hand or with a tensioning tool and once installed they offer an extremely secure method of cable bundling. Manufactured from 316 stainless steel MLT cable ties are tough, corrosion resistant with a temperature range from -80° C to +538° C.
Hellermann Tyton stainless steel cable ties are used in mass transit, ship building, oil rigs, hazardous areas, mining, petrochemicals and rail industries. All MBT Hellermann Tyton Stainless Steel Cable Ties have full LUL (London Underground & TfL) approval (Standard 1-085, Product Register No: 2002).
Panduit Cable Ties & Accerssories
This document provides an overview of electrical solutions offered by Panduit, including:
1) Cable ties in various styles, materials, and sizes for bundling, mounting, and identifying cables.
2) Cable accessories like wiring ducts, raceways, abrasion protection, and cable management products.
3) Connectors for terminals, power, and grounding applications.
4) Labeling systems, markers, and lockout/tagout safety solutions.
The document describes Panduit's extensive line of cable ties and provides charts for selecting the appropriate tie for an application based on required functions, material properties, and performance needs.
Product Catalogue 2015
Optifab International is a leading UK fibre optic manufacturer and supplier based in Milton Keynes. They specialize in manufacturing fibre optic communication and networking products for bespoke and general optical applications. Their product range includes passive infrastructure, active categories like FTTH, patch cords, pigtails, MPO/MTP solutions, pre-terminated fibre, cable, panels, closures, splitters, wall boxes, and test equipment. Optifab aims to provide cost-effective and reliable solutions to clients in different industries.
What's hot (20)
Prysmian High Voltage Polymeric Cables - SF6 Immersed Sealing Ends
Prysmian High Voltage Polymeric Cables - SF6 Immersed Sealing Ends
Prysmian A220SS 423LSF-71 (3.5-8.5mm) LSF Brass BICON Gland Kits
Prysmian A220SS 423LSF-71 (3.5-8.5mm) LSF Brass BICON Gland Kits
Prysmian HV Cables, Joints & Terminations - 66kV 132kV
Prysmian HV Cables, Joints & Terminations - 66kV 132kV
Kingsmill - Copper Earthing, Surge Protection & Lightning Protection
Kingsmill - Copper Earthing, Surge Protection & Lightning Protection
Panduit Lockout Tagout Electrical Safety Catalogue
Panduit Lockout Tagout Electrical Safety Catalogue
SEB - Cable Pulling & Cable Laying Equipment For Low & High Voltage Cables In...
SEB - Cable Pulling & Cable Laying Equipment For Low & High Voltage Cables In...
Everest Cables And Connectors Private Limited, Delhi
Everest Cables And Connectors Private Limited, Delhi
Platform touch voltage protection membrane system and other railways buildin...
Platform touch voltage protection membrane system and other railways buildin...
Emtelle PowerProtect Cable Duct Systems, Class 1 33kV
Emtelle PowerProtect Cable Duct Systems, Class 1 33kV
Polypipe - LV & HV Underground Power Cable Ducting & Cable Protection
Polypipe - LV & HV Underground Power Cable Ducting & Cable Protection
Hellermann Tyton - Cable Ties, Fixings & Stainless Steel Cable Ties
Hellermann Tyton - Cable Ties, Fixings & Stainless Steel Cable Ties
Viewers also liked
CW LSF Brass Cable Glands - Prysmian BICC BICON 422LSF NEW
This document provides specifications for a CW LSOH Gland Kit that includes brass glands, earth tags, locknuts, and shrouds for securing low smoke zero halogen (LSOH) cables. The kit is suitable for indoor and outdoor use with galvanized steel or plastic/rubber sheathed LSOH cables in most climatic conditions. It has three-part armor locking and meets fire performance standards with approval from London Underground for subsurface installations. Specifications include kit contents and dimensions, material information, temperature rating, compliance standards, and manufacturer details.
Prysmian CW LSF Brass Cable Glands - BICC, BICON, Prysmian
The CW LSOH Brass Gland Kit is an indoor/outdoor cable gland for securing single-wire-armored cables. It consists of a brass gland, brass earth tag, brass locknut, and silicone shroud. The kit is rated for IP66 protection and operates in temperatures from -20°C to +90°C. It is suitable for cables up to 75mm and made from corrosion-resistant brass alloy.
E1W LSF Brass Cable Glands - BICC, BICON, Prysmian 421LSF
The document describes an E1W gland kit for securing steel wire armored cables. It contains brass glands and accessories for indoor and outdoor use with galvanized steel cables. The gland features a three-part armor lock for simple inspection and checking electrical continuity. Specifications are provided for 13 different gland kits covering a range of cable diameters.
Prysmian E1W LSF Brass Cable Glands - BICC, BICON
This document provides information on the E1W LSOH Brass Gland Kit, including:
- It is an indoor/outdoor cable gland for sealing circular, steel-armored cables in most climates.
- The kit includes a brass gland, earth tag, locknut, and shroud to provide an IP66-rated seal for cables up to 75mm in diameter.
- It is made of corrosion-resistant brass alloy and has zero halogen silicone seals approved for use in the UK.
Prysmian (BICON) Cable Glands for FP Cables - FP200, FP Plus, FP400, FP600 an...
Prysmian (BICON) Cable Glands for FP Cables - FP200, FP Plus, FP400, FP600 an...Thorne & Derrick International
Prysmian (BICON) Cable Glands for FP Cables Prysmian (BICON) cable gland kits are suitable for glanding and terminating the Prysmian FP Fire Resistant and Fire Performance range of cables - this includes Prysmian (BICON) cable glands kits for FP100, FP200, FP400, FP600, FP600 Plus and FP Plus fire resistant cables. T&D UK distribute the complete range of Prysmian (BICON) cable gland kits including Industrial BICON Cable Glands (A2, BW, CW, E1W), Hazardous Area Flameproof BICON Cable Glands (E1FW), Barrier BICON Cable Glands and High Voltage BICON Cable Glands. Prysmian BICON FP Cable Gland Kits - Overview : • Prysmian CW BICON Cable Gland Kits LSF LSOH (Indoor Outdoor) - For Steel Wire Armoured Cable - Prysmian FP600S Cables • Prysmian Brass BICON Cable Gland Kits (Indoor Outdoor) - For Steel Wire Armoured Cables - Prysmian FP600 Cables • Prysmian Plastic BICON Cable Gland Kits - Prysmian FP100, FP200 Gold and FP Plus Cables • Prysmian E1W LSF BICON Cable Gland Kits - Prysmian FP400 CablesCablofil EZ Path Fire Protection Seals for Fire Barrier Walls & Floors
Cablofil EZ Path Fire Protection Seals for Fire Barrier Walls & Floors Thorne & Derrick International
Cablofil EZ Path provides a complete a certified fire protection seal for cables and pipe entries or penetrations through fire rated walls and floors - Cablofil EZ Path maintains high performance wall and floor fire barrier.
Cablofil EZ Path offers fire protection (240 minutes) for fire rated floor and wall constructions in accordance with BS476 : Part 20 and European Standard EN1366-3.
Cablofil EZ Path - Intumescent Fire Barrier for Cables
Intumescent products expand with heat creating a fire barrier filling any gaps created as combustible through penetrations (ducts, service entries, floor and wall openings) burn away, which otherwise would leave an opening for the passage of toxic smoke, heated gasses and fire. Cablofil EZ Path provides airtight barriers for toxic smoke and gas ensuring personal safety during a fire. Where cables enter a fire barrer wall or floor Cablofil EZ Path firestop materials can be installed to restore an hourly fire-rating.
Two intumescent fire protection pads cushion and compress the cables top and bottom and prevent smoke propagation through the opening even if the intumescent material does not expand (Cold Smoke). Exposed to fire or high temperatures, the intumescent fire barrier responds to flames or heat by rapidly sealing the cable pathway, duct or service entry and preventing passage of flames and smoke. Cablofil EZ Path ensures maximum fire protection and resistance whether it is empty or full - therefore EZ Path provides excellent fire protection with every new or retrofit cable installation.
Built in Future Use - Cablofil EZ Path features a built-in firestopping system that automatically adjusts to the number of cables running through - cables can be added or changed without the need to remove and re-install fire stopping materials.
Cable Tray -cables present in cable tray can provide a source of fuel to propagate fire, release toxic smoke and gases. They create openings that can compromise the fire barrier allowing spread of fire, toxic smoke and superheated gases.Prysmian FP600S Multicore Fire Resistant Cables
FP600S is a fire resistant armoured cable suitable for essential emergency systems. It has several key features including:
- Maintaining circuit integrity in the event of a fire for up to 120 minutes according to various British Standards.
- Carrying power and control for life safety and firefighting systems such as smoke barriers and fire pumps.
- Having a mineral ceramic insulation and galvanized steel wire armour for protection against heat and mechanical impacts.
- Providing current ratings from 42 to 787 amps depending on the cable size and installation method.
3M Fire Barrier Intumescent Moldable Putty
3M Fire Barrier Moldable Putty+ is an intumescent fire-resistant putty that expands when exposed to heat. It is used to seal openings and maintain the fire rating of structures. The putty comes in stix, pads, and cable wraps and adheres to many surfaces. It has a four hour fire rating and expands to form an insulating char when heated, helping prevent the spread of fire and smoke. The document provides instructions on installing the putty in various applications such as sealing cables penetrating walls.
Top Cable company profile_english
Top Cable manufactures a wide range of cables ranging from control cables for specialized applications to larger power cables for medium voltage applications in various industries. We supply cables for construction projects, railway, mining, marine, areonautical, military, OEM’s and renewable energy plants
Abtech BPG Fire Rated Enclosures - Fire Rated Resistant Enclosures
Fire Rated, LSOH (Low Smoke Zero Halogen LSF) Junction Box Enclosures IEC 331
(750°C for 3 hours) & BS6387 (950°C for 3 hours - Flame Only)
Fire Rated Electrical Enclosures - Mild, Stainless Steel, GRP
When installing essential electrical systems such as emergency lighting or fire safety controls, great emphasis is placed upon the fire survivability of the critical components such as fire dampers, actuators and cables that are contained in the area. Often the specification of the junction boxes and enclosures is neglected with respect to fire resistance and survival. On the basis that any system is only as good as the weakest part, it is important that attention is paid to the junction boxes being utilised for essential systems.
Abtech ensure the fire survival of junction boxes using both the SX (stainless steel enclosure) and BPG (GRP enclosure) ranges.
Fire Rated Electrical Enclosures Tested to IEC 331 - SX Enclosure Range :
IEC331 - 750 Degrees celsius for 3 hours - flame only - PASSED
BS6387 C - 950 Degrees celsius for 3 hours - flame only - PASSED
BS6387 Z - 950 Degrees celius for 3 hours - external impact - PASSED
BS6387 W - 950 Degrees celsius for 3 hours - water spray - PASSED
Abtech SX and BPG electrical enclosures and junction boxes when fitted with ceramic terminals are suitable for use in areas designated to require fire resistant cables according to IEC331, BS6387 C (fire alone), BS6387 Z (impact test) and BS6387 W (fire with water test).
Prysmian FP200 Gold Multicore Fire Resistant Cables
This document provides specifications for FP200 Gold multicore fire resistant cables. It lists the temperature range, fire resistance ratings, low smoke emissions, flexibility, fire performance, bending radius, conductor material, insulation, screening, identification, sheath material and color options, applications, installation guidelines, and current ratings in tabular format for various cable sizes with notes. Key details include a temperature range of -20 to +70°C, fire resistance per various standards, rigid flexibility, use for fire detection/alarm and emergency systems, and recommended accessories for installation.
Charles Endirect - Central Earth Terminal (CET) for Steel Wire Armour (SWA) C...
Charles Endirect - Central Earth Terminal (CET) for Steel Wire Armour (SWA) C...Thorne & Derrick International
This document provides information on earthing components from Charles Endirect, including compression glands, central earth terminals (CETs), saddles, and terminal blocks. It details the different sizes and types of components available to accommodate standard cable sizes. Compression glands are available in various sizes to accept cables from 1.5mm2 to 35mm2. CETs can earth cables from 2.5mm2 to 35mm2, prepared by bending back or splaying the armours. Separate gland plates are also available in different sizes and configurations.Ellis Patents Cable Cleats - General Catalogue
This document provides information about electrical cable cleats manufactured by Ellis Patents. It includes details on various cleat models suitable for different cable and short circuit force applications. The Emperor and Vulcan+ cleats are made of stainless steel and are tested to withstand the highest short circuit forces. The Alpha cleats are made of extruded aluminum and are a robust alternative to traditional aluminum cleats. The document provides specifications, maximum short circuit test levels, recommended cleat spacing and weight for each cleat model suited for trefoil, single or quad cable configurations. It also shares information on testing standards and applications where Ellis cleats are used including rail links, nuclear plants and oil rigs.
Zone 1 & 2 Isolators - ATEX Certified Isolators, 16Amp
This technical data sheet provides information on i-switch ATEX Certified Zone 1 Switch Disconnectors for use in hazardous environments. It lists the electrical ratings and certifications for disconnectors ranging from 16A to 250A. Dimensions and standard configurations are provided for each enclosure type, along with example catalogue numbers. Additional configurations can be custom ordered.
Fire Resistant Cable Joints
This document discusses low voltage zero halogen cable joints that provide limited fire hazard. It offers:
1) A comprehensive range of heat shrink joints for single and multicore low smoke fume zero halogen cables that have been fire tested and compliant with London Underground standards.
2) Joints that incorporate flame retardant, non-halogen heat shrink tubing and a flexible outer fire barrier tube to provide a high degree of fire resistance.
3) Easy to use joints that are slim in profile and can be installed horizontally or vertically with an unlimited shelf life. Part numbers and cable ranges supported are provided.
Espelho da saúde oral
Este documento fornece informações sobre a boca humana, incluindo a composição, dentes, doenças comuns e cuidados para manter uma boca saudável. Ele discute os dentes, gengivas, língua e palato, bem como condições como placa bacteriana e cárie, e recomenda escovação dental, uso de fio dental e alimentação saudável.
Prysmian Draka - Marine & Offshore LV HV Cables
Prysmian Draka supplies a complete range of marine, offshore oil and gas power, control and instrumentation cables for use on oil platforms and floating oil production units (FPSO). T&D distribute an extensive range of cables from 250V to 33kV - a complete range of marine, offshore oil and gas industry cables to IEEE, UKOOA and IEC specification.
The T&D and Prysmian commercial relationshipgoes back to the previous century. T&D have distributed the Prysmian Components range of cable joints, cable glands, cable cleats and high voltage cable terminations for several decades. The new relationship will now extend T&D's portfolio to embrace Prysmian Draka Offshore Marine, Oil & Gas cables.
Prysmian Draka Marine Offshore Oil & Gas Cables - Overview
RFOU(i) 250V S1/S5 Halogen-free, mud resistant instrumentation cable
RFOU(c)250V S2/S6 Halogen-free, mud resistant instrumentation cable
BFOU(i)250V S3/S7 Halogen-free, mud and fire resistant instrumentation cable
BFOU(c)250V S4/S8 Halogen-free, mud and fire resistant instrumentation cable
RU(i) 250V S11 Halogen-free, unarmoured, mud resistant instrumentation cable
BU(i) 250V S13 Halogen-free, unarmoured, mud resistant instrumentation cable
BU(c) 250V S14 Halogen-free, unarmoured, mud resistant instrumentation cable
RFOU 0,6/1kV P1/P8 Halogen-free, mud resistant power cable
RFOU 6/10(12)kV P3/P10 Halogen-free, mud resistant HV power cable
RFOU 12/20(24)kVP19/P21 Halogen-free, mud resistant HV power cable
BFOU 0,6/1kV P5/P12 Halogen-free, mud resistant, fire resistant power cable
UX 1000V P15 Halogen-free, mud resistant insulated conductor
RU 0,6/1kV P18 Halogen-free, unarmoured, mud resistant power cable
BU 0,6/1kV P17 Halogen-free, fire resistant, unarmoured, mud resistant power cable
QFCI Fire resistant optical fibre cable, halogen-free
AICI Optical cable for industrial environments
IFLI 250V P16 Cables for living quarter and office areas, halogen-free
Fire Alarm & Fire Detection Cables For Building - Why Manage Service Cables I...
Fire Alarm & Fire Detection Cables For Building - Why Manage Service Cables I...Thorne & Derrick International
This document discusses the dangers of plastic cable trunking and ties in building fires. It summarizes several incidents where firefighters died after becoming entangled in cables that had fallen due to melting plastic supports. The coroner's report on one incident recommended replacing all plastic trunking and ties with fire-resistant cable supports. The document advocates changing building regulations to require fire-resistant cable supports for all wires, not just fire alarms. It provides guidance on selecting non-combustible cable accessories and securely fixing cables to prevent collapse in fires.Blockchain 2015: Analyzing the Blockchain in Financial Services
This document summarizes the emergence and growth of blockchain technology in financial services from 1994 to 2015. It notes that while banks were slow to adopt the internet in the 1990s, fintech startups have increasingly disrupted banks since the mid-2000s. In 2014, banks did not strategically plan for blockchain, but the technology is now becoming comparable to the importance of the internet. The document analyzes sectors of the blockchain industry like exchanges, wallets, and applications that could transform financial services in 2016.
O menino de vento
Fernando Marques Pereira é o nome de uma pessoa. O documento fornece apenas um nome, sem outras informações sobre a pessoa ou contexto.
Viewers also liked (20)
CW LSF Brass Cable Glands - Prysmian BICC BICON 422LSF NEW
CW LSF Brass Cable Glands - Prysmian BICC BICON 422LSF NEW
Prysmian CW LSF Brass Cable Glands - BICC, BICON, Prysmian
Prysmian CW LSF Brass Cable Glands - BICC, BICON, Prysmian
E1W LSF Brass Cable Glands - BICC, BICON, Prysmian 421LSF
E1W LSF Brass Cable Glands - BICC, BICON, Prysmian 421LSF
Prysmian (BICON) Cable Glands for FP Cables - FP200, FP Plus, FP400, FP600 an...
Prysmian (BICON) Cable Glands for FP Cables - FP200, FP Plus, FP400, FP600 an...
Cablofil EZ Path Fire Protection Seals for Fire Barrier Walls & Floors
Cablofil EZ Path Fire Protection Seals for Fire Barrier Walls & Floors
Abtech BPG Fire Rated Enclosures - Fire Rated Resistant Enclosures
Abtech BPG Fire Rated Enclosures - Fire Rated Resistant Enclosures
Prysmian FP200 Gold Multicore Fire Resistant Cables
Prysmian FP200 Gold Multicore Fire Resistant Cables
Charles Endirect - Central Earth Terminal (CET) for Steel Wire Armour (SWA) C...
Charles Endirect - Central Earth Terminal (CET) for Steel Wire Armour (SWA) C...
Zone 1 & 2 Isolators - ATEX Certified Isolators, 16Amp
Zone 1 & 2 Isolators - ATEX Certified Isolators, 16Amp
Fire Alarm & Fire Detection Cables For Building - Why Manage Service Cables I...
Fire Alarm & Fire Detection Cables For Building - Why Manage Service Cables I...
Blockchain 2015: Analyzing the Blockchain in Financial Services
Blockchain 2015: Analyzing the Blockchain in Financial Services
Similar to Prysmian FP Fire Resistant Cable Glands - BICC, BICON, Prysmian
Prysmian BICON E10C Cutter Head
This document provides information about a tooling component - a cutter head that can cut aluminum or copper cables up to 100mm in diameter using a BICON hydraulic pump. The cutter head weighs 13.3kg and measures 570mm in length, 250mm in height, and 78mm in width. Replacement blades for the cutter head are available upon request.
Ellis Patents Cable Cleats - Phoenix Cable Cleats Fire Resistant
Holroyd Components Ltd. is a manufacturer of Phoenix Fire Rated Cableclamps made from 316L Stainless Steel. The cableclamps have passed fire resistance testing in accordance with British Standards and short circuit testing in accordance with IEC standards. The document provides specifications for 11 different part numbers of cableclamps, including the cable diameter range each fits, dimensions, weight, and fixing holes of each model.
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...Thorne & Derrick International
The 424TX Series brass barrier gland is certified for use in hazardous areas. It provides an IP66 seal for wire braided cables and can be used in Zone 1, Zone 2, and other hazardous areas. The gland is weatherproof, waterproof, and available in various thread sizes and cable diameter ranges to suit a wide variety of applications.Explosion Proof Cable Glands - Prysmian Barrier Glands (424TP) for Lead Sheat...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TP) for Lead Sheat...Thorne & Derrick International
The document discusses explosion proof cable glands. It describes the Barr-Pb EEx d IIC brass barrier gland, which provides an IP66 seal for lead sheathed cables used in hazardous areas. It can be used in zones 1 and 2, and provides mechanical cable retention, electrical continuity to the armor wire and inner lead sheath. Technical data includes ATEX certification, a service temperature range of -60°C to +90°C, and zones in which it can be used. Tables provide gland details, references, thread sizes, and dimensions.Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...Thorne & Derrick International
This document provides information on heat shrink terminations for low voltage PILC cables ranging from 0.6/1kV. It lists the part numbers, cable ranges, and tail lengths for single core and 3 core indoor/outdoor heat shrink terminations for XLPE and PILC cables ranging from 1.9/3.6kV. It also lists part numbers for 3/4 core PILC cable terminations ranging from 4-300mm2 with tail lengths of 600mm or 1000mm. An note indicates that for 4 core terminations, the last digit of the part number should read -4.Airfield Ground Lighting (AGL) Heat Shrink Cable Joint Kits
This document provides information on heat shrink joint kits for airfield lighting cables and traffic control cables. For airfield lighting cables, it lists part numbers for joint kits for primary and secondary cables with various connector and cable types. For traffic control cables, it similarly lists part numbers for joint kits for loop cables, feeder cables, telephone cables, and motorway cables. The joint kits are approved for use on UK military and civilian airports and by the UK's Department of Transport.
Trefoil cleats BICON-PRYSMIAN
This document summarizes trefoil cleats used for mounting low, medium, and high voltage cables. The cleats are made of high strength glass filled polyamide that is non-magnetic, halogen free, flame retardant, weather resistant, and expected to last over 40 years. They are suitable for cable diameters between 27-118mm and come in 5 sizes that can withstand fault levels between 28-51kA RMS. The cleats have stud holes that accept M10, M12, or M14 fixings and can operate in temperatures between -40°C to +125°C.
SPS - LV MV Heat Shrink Cable Joints & Terminations (Full Catalogue)
The document provides information on cable accessories including terminations, joints, heat shrink components, connectors, tapes and tools. It lists various termination kits for single core and three core XLPE and PILC cables from 0.6kV to 33kV. Joints listed include triplex joints for 12kV cables, universal heat shrink joints for 7.2/12kV, 3 core joints for 17.5-33kV cables, and cold shrink joints for 7.2-33kV. Accessories such as heat shrink tubing, anti-track materials, and compression lugs are also listed. The company is based in the UK and specializes in heat shrink and cold shrink cable joints and terminations
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...Thorne & Derrick International
Shrink Polymer Systems high voltage (HV) heat shrink cable joints, cable terminations and busbar tape and tubings for 6.6kV, 11kV, 24kV and 33kV.
SPS HV Cable Joints - Straight, transition, pot-end, trifurcating and branch cable joints for both polymeric and paper cables, 11kV-33kV.
SPS HV Cable Terminations - Single and 3 core, indoor and outdoor high voltage cable terminations for both polymeric and paper cables, 11kV-33kV.
SPS 6.6kV, 11kV and 33kV heat shrink cable joint kits and cable termination kits are quick and easy to install by trained HV jointers providing high reliability and excellent performance for high voltage cable circuits. SPS heat shrink cable termination and joint kits are suitable for three and single core XLPE, EPR and PILC cables, including utility specification Triplex cables 11kV-33kV.
SPS heat shrink cable joints and cable terminations are Tested to International Standards outlined in Cenelec HD 628 S1 and 629.1 S2 : 2006 - encompassing VDE 0278 and IEC 60502 - peace of mind performance.
THORNE & DERRICK UK are Exclusive UK Distributors for SPS Shrink Polymer Systems. T&D SPS provide the most competitive prices, largest stocks and first class service for LV-HV cable joints, cable terminations and accessories up to 33kV.
Tested to Cenelec, VDE, IEC Standards - save time and money without compromising high voltage cable installations.
T&D supply LV-HV Cable Accessories, Cable Jointing & Electrical Eqpt - we service UK and global contractors involved in cable installations, cable jointing, substation and electrical construction at LV, 11kV, 33kV and EHV. We export to utilities, power, construction, rail, mining, offshore, oil, gas and petrochemical industries.
Shrink Polymer Systems Catalogue
Our Catalogue which will include our full range of Cable Joints, Terminations and Accessories, please drop me a message for any specials.
ATEX Control Station EEx with Green LED Lamp Indicator - Walsall LCP151
ATEX Control Station EEx with Green LED Lamp Indicator - Walsall LCP151Thorne & Derrick International
This document provides contact and product information for multiple global locations of Walsall Ltd, an industrial equipment supplier. It also provides specifications for one of their products, the LCP150 Ex e mb LED Indicator Lamp, including electrical and enclosure details, ordering information, hazardous area certification, and dimensional drawings.SPS Heat Shrink Cable Glands, HCS1, 4-12mm
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
SPS HCS3 Heat Shrink Cable Glands 13-26mm
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
SPS HCS2 Heat Shrink Cable Glands 7-17mm
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
Heat Shrink Cable Glands - Shrink Polymer Systems
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
SPS HCS5 Heat Shrink Cable Glands 36-70mm
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
SPS HCS4 Heat Shrink Cable Glands 19-38mm
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
SPS HCS4s Heat Shrink Cable Glands 19-53mm
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
Cable Rollers - Outer Angle Double Cable Rollers - Cable Roller Plumett - Ove...
Cable Rollers - Outer Angle Double Cable Rollers - Cable Roller Plumett - Ove...Thorne & Derrick International
Plumett overhead cable rollers are designed for stringing ABC cable(Aerial Bundled Cables).
Overhead Cable Rollers :
*Mounted on the pole by meads of a ratchet operated nylon strap, fully adjustable to the pole diameter.
*Cable rollers made from cast aluminium fitted with ball bearings and zinc plated steel frame.
*Suitable for straight lines, inner and outer angle cable pulling.
Thorne & Derrick stock an extensive range of cable pulling and laying equipment for underground (trench), duct and overhead cable installations.
T&D UK distribute the complete range of Cable Pulling and Cable Laying Equipment for low and high voltage (LV-HV) power cable installations into underground trench or cable duct - this includes XLPE, PILC, EPR, waveform, service cables, triplex, 11kV, 33kV, EHV, fibre optic, telecoms and street lighting cables. We supply cable rollers, cable socks, cable jacks, drum trailers, cable pulling lubricant, underground cable protection (Stokbord & Tape Tile Cable Covers) and conduit duct rod - we service the utility cable laying contractor, electrical contractor and export markets.
Cable Rollers - Inner Angle Double Cable Rollers - Cable Roller Plumett - Ove...
Cable Rollers - Inner Angle Double Cable Rollers - Cable Roller Plumett - Ove...Thorne & Derrick International
Plumett overhead cable rollers are designed for stringing ABC cable(Aerial Bundled Cables).
Overhead Cable Rollers :
*Mounted on the pole by meads of a ratchet operated nylon strap, fully adjustable to the pole diameter.
*Cable rollers made from cast aluminium fitted with ball bearings and zinc plated steel frame.
*Suitable for straight lines, inner and outer angle cable pulling.
Thorne & Derrick stock an extensive range of cable pulling and laying equipment for underground (trench), duct and overhead cable installations.
T&D UK distribute the complete range of Cable Pulling and Cable Laying Equipment for low and high voltage (LV-HV) power cable installations into underground trench or cable duct - this includes XLPE, PILC, EPR, waveform, service cables, triplex, 11kV, 33kV, EHV, fibre optic, telecoms and street lighting cables. We supply cable rollers, cable socks, cable jacks, drum trailers, cable pulling lubricant, underground cable protection (Stokbord & Tape Tile Cable Covers) and conduit duct rod - we service the utility cable laying contractor, electrical contractor and export markets.
Similar to Prysmian FP Fire Resistant Cable Glands - BICC, BICON, Prysmian (20)
Ellis Patents Cable Cleats - Phoenix Cable Cleats Fire Resistant
Ellis Patents Cable Cleats - Phoenix Cable Cleats Fire Resistant
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TP) for Lead Sheat...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TP) for Lead Sheat...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
Airfield Ground Lighting (AGL) Heat Shrink Cable Joint Kits
Airfield Ground Lighting (AGL) Heat Shrink Cable Joint Kits
SPS - LV MV Heat Shrink Cable Joints & Terminations (Full Catalogue)
SPS - LV MV Heat Shrink Cable Joints & Terminations (Full Catalogue)
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...
ATEX Control Station EEx with Green LED Lamp Indicator - Walsall LCP151
ATEX Control Station EEx with Green LED Lamp Indicator - Walsall LCP151
Cable Rollers - Outer Angle Double Cable Rollers - Cable Roller Plumett - Ove...
Cable Rollers - Outer Angle Double Cable Rollers - Cable Roller Plumett - Ove...
Cable Rollers - Inner Angle Double Cable Rollers - Cable Roller Plumett - Ove...
Cable Rollers - Inner Angle Double Cable Rollers - Cable Roller Plumett - Ove...
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Prysmian FP Fire Resistant Cable Glands - BICC, BICON, Prysmian
- 1. Fire Performace (FP) GlandsIndustrial Cable Glands Features & Benefits Ref: FP2520/08/09 > FP cable gland suitable for a range of fp cables including: rFP200 Gold and FP Plus Application > Easy fit gland > One size fits a range of cables > Available in red or white to match the cable Prysmian Cables & Systems Limited, Components Unit, Oak Road, Wrexham Industrial Estate, Wrexham, LL13 9PH, UK Commercial Enquiries, Tel +44 (0) 845 767 8345, Fax: +44 (0) 23 8029 5465 www.prysmian.co.uk Technical Data > IP68 rated WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK
- 2. Gland Details Ref: FP2520/08/09 FP2520 Cable Gland Prysmian Cables & Systems Limited, Components Unit, Oak Road, Wrexham Industrial Estate, Wrexham, LL13 9PH, UK Commercial Enquiries, Tel +44 (0) 845 767 8345, Fax: +44 (0) 23 8029 5465 www.prysmian.co.uk 30 12 7 HEX 23 A/F Ø26.5 M20 x 1.5 HEX 24 A/F 26.5 A/C SEE NOTE 6 HEX 24 A/F 26.5 A/C Ø12.0 FP2520 Gland is specifically designed for cables’ outer diameter between 6 - 12 mm. WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK