The municipality of Prnjavor has a developed metal processing sector, with the largest number of companies operating in this field. Metal processing is a major industry in Prnjavor and represents an opportunity for new investment. Some of the most important subsectors are production of reinforcing meshes, boilers, metal machining, and metal constructions. In 2017 there were 17 metal companies in Prnjavor employing 640 people and generating over $10 million in revenue, making it one of the most important sectors of the local economy.
Laktaši - DRVNA INDUSTRIJA - Prilike za ulaganja i spoljnotrgovinsku saradnjukomorabl
The wood processing industry is an important sector for the municipality of Laktaši, employing over 300 workers. The largest wood processing companies, such as DRVOFLOR and SG GRADNJA, have seen increases in revenue and employment in recent years. The municipality supports the industry through two industrial zones and by offering tax incentives to investors. Foreign investment is seen as an opportunity to apply new technologies that could increase the sector's contribution to the local economy.
Doing business and investing in the Russian Federation, 2015PwC Russia
This guide has been prepared for general guidance on matters of interest only, and does not constitute professional advice. You should not act upon the information contained in this guide without obtaining specific professional advice. No representation or warranty (express or implied) is given as to the accuracy, timeliness or completeness of the information contained in this guide, and, to the extent permitted by law, PwC, its members, employees and agents accept no liability, and disclaim all responsibility, for the consequences of you or anyone else acting, or refraining to act, in reliance on the information
contained in this guide or for any decision based on it.
The document discusses the wood processing sector and investment opportunities in Prnjavor, Bosnia and Herzegovina. It notes that Prnjavor has a developed economy with active wood processing capacities. Wood processing and furniture production are important for the local economy. It also describes the Business-Tourist Zone Vijaka, which has areas designated for industrial and tourism/recreation development near good transportation connections. The top wood processing companies in Prnjavor are noted.
The municipality of Prnjavor, Bosnia and Herzegovina has potential for investment in agro-business due to its fertile land, favorable climate, and dairy and meat production. There are opportunities for processors of milk, meat, and fruit. The municipality aims to improve the business environment and support investors and agriculture through regulatory reform, incentive funds, and an aftercare program for existing investors. The Vijaka business-tourist zone located near highways provides opportunities for greenfield investments in industry and tourism.
laktaši - agro biznis - Prilike za ulaganja i spoljnotrgovinsku saradnjukomorabl
The municipality of Laktaši in Bosnia and Herzegovina promotes investment opportunities in agribusiness. Key points include:
- Laktaši has over 25,000 hectares of agricultural land and is one of the most developed agricultural areas in the country.
- There are opportunities to invest in developing purchasing and processing capacities for fruits and vegetables to add value to agricultural production.
- The largest agribusiness companies in Laktaši employ over 370 people and generated 6.3% of the municipality's total income in 2017.
- A new 80 hectare Agro Business Park is planned to attract more investment and companies in the food industry sector.
Laktaši - DRVNA INDUSTRIJA - Prilike za ulaganja i spoljnotrgovinsku saradnjukomorabl
The wood processing industry is an important sector for the municipality of Laktaši, employing over 300 workers. The largest wood processing companies, such as DRVOFLOR and SG GRADNJA, have seen increases in revenue and employment in recent years. The municipality supports the industry through two industrial zones and by offering tax incentives to investors. Foreign investment is seen as an opportunity to apply new technologies that could increase the sector's contribution to the local economy.
Doing business and investing in the Russian Federation, 2015PwC Russia
This guide has been prepared for general guidance on matters of interest only, and does not constitute professional advice. You should not act upon the information contained in this guide without obtaining specific professional advice. No representation or warranty (express or implied) is given as to the accuracy, timeliness or completeness of the information contained in this guide, and, to the extent permitted by law, PwC, its members, employees and agents accept no liability, and disclaim all responsibility, for the consequences of you or anyone else acting, or refraining to act, in reliance on the information
contained in this guide or for any decision based on it.
The document discusses the wood processing sector and investment opportunities in Prnjavor, Bosnia and Herzegovina. It notes that Prnjavor has a developed economy with active wood processing capacities. Wood processing and furniture production are important for the local economy. It also describes the Business-Tourist Zone Vijaka, which has areas designated for industrial and tourism/recreation development near good transportation connections. The top wood processing companies in Prnjavor are noted.
The municipality of Prnjavor, Bosnia and Herzegovina has potential for investment in agro-business due to its fertile land, favorable climate, and dairy and meat production. There are opportunities for processors of milk, meat, and fruit. The municipality aims to improve the business environment and support investors and agriculture through regulatory reform, incentive funds, and an aftercare program for existing investors. The Vijaka business-tourist zone located near highways provides opportunities for greenfield investments in industry and tourism.
laktaši - agro biznis - Prilike za ulaganja i spoljnotrgovinsku saradnjukomorabl
The municipality of Laktaši in Bosnia and Herzegovina promotes investment opportunities in agribusiness. Key points include:
- Laktaši has over 25,000 hectares of agricultural land and is one of the most developed agricultural areas in the country.
- There are opportunities to invest in developing purchasing and processing capacities for fruits and vegetables to add value to agricultural production.
- The largest agribusiness companies in Laktaši employ over 370 people and generated 6.3% of the municipality's total income in 2017.
- A new 80 hectare Agro Business Park is planned to attract more investment and companies in the food industry sector.
Srbac - AGRO BIZNIS - Prilike za ulaganja i spoljnotrgovinsku saradnjukomorabl
The municipality of Srbac has great potential for agricultural investment and development due to its fertile land, long tradition of farming, and strategic location. Key opportunities include expanding greenhouse vegetable production, developing fruit orchards, and constructing facilities like refrigerators and tunnels to add value to local agricultural production. The municipality aims to further agriculture and attract agro-industry investment to create jobs and improve livelihoods in Srbac.
The document is a 2020 investment passport for the city of Enerhodar, Ukraine. It provides information to prospective national and foreign investors on the city's competitive advantages and investment opportunities. Enerhodar has a strategic location and developed infrastructure. It has a young and educated population with high employment and salaries concentrated in the energy sector. The city has a mono-functional economy dependent on two large power plants. The document outlines Enerhodar's development strategy, living conditions, budget profile, business climate, and specific investment proposals to attract new investment.
This document provides information about Latvia including:
- Key facts such as the capital Riga, population, membership in international organizations, and GDP growth outperforming the EU average.
- Overview of leading industries such as agriculture, forestry, and chemical industries as well as a description of the capital Riga and its infrastructure.
- Details on Latvia's skilled labor force, competitive tax rates, and strong transportation infrastructure including the port, rail, and Riga International Airport.
- Statistics on the tourism industry showing increases in visitors and highlighting Latvia's EU presidency in 2015.
The document provides information about the Sarajevo Macro Region (SMR) in Bosnia and Herzegovina. SMR covers an area of 8,700 km2 and has a population of over 720,000 people spread across 32 municipalities in two entities. It includes the highly populated and industrialized city of Sarajevo. The Sarajevo Development Agency (SERDA) was established in 2003 and works to promote regional economic development projects in SMR, focusing on areas like industry, tourism, rural development, education, and the environment.
INVESTMENT PROPOSALS OF DNIPROPETROVSK REGIONDIA_investment
The document discusses investment opportunities in Dnipropetrovsk region of Ukraine. It describes several industrial parks being developed in the region to attract investors, including Kryvbas Industrial Park, Pavlohrad Industrial Park, and DneprInterHub Industrial Park. It also identifies available land plots for industrial use and development of solar power stations totaling over 2,000 hectares. The Dnipropetrovsk Regional Investment Agency is introduced as the organization assisting investors with all stages of project implementation from site selection to construction and operation.
The document provides an investment guide for the Pelagonija region in Macedonia. It highlights the region's fertile soil, developed industry, energy production, and natural and cultural attractions as offering opportunities for investments in agriculture, industry, tourism and other sectors. The guide details incentives for investors including tax benefits, low labor costs, and support from local institutions. It also provides information on individual municipalities in the region and their resources and potential investment projects.
200416_ CERBA_WEBINAR_Reforms and Opportunities in Uzbekistan.ppsxJaloladdinYoqubov
The document discusses opportunities for foreign investment in Uzbekistan. It provides background on Uzbekistan's population, GDP, economic sectors, trading partners, tax system, and key industries such as agriculture, textiles, automotive, and mining. It outlines the country's development strategy and changes since 2016 to improve investment climate such as currency liberalization and tax reforms. The document also describes Uzbekistan's free economic zones and privileges for investors. It lists industries of interest such as chemicals, tourism, and mobile apps and major foreign investors. In conclusion, it promotes services from Schneider Group to support market entry and operations in Uzbekistan.
The investment passport of the city ZhmerinkaSergey Nikityuk
The city of Zhmerinka, Ukraine is inviting investors to take advantage of the city's strategic location, infrastructure, and available land plots. Zhmerinka has a population of 35,000 people and is located on a major railway line with convenient access to Kiev and other major cities. The city administration guarantees support for investors and offers several greenfield land plots ranging from 2 to 9 hectares for industrial development. The land plots have access to utilities and transportation infrastructure. Zhmerinka seeks to attract efficient investors to facilitate the growth of local industry and economy.
ECONOMIC AND INVESTMENT POTENTIAL OF DNIPROPETROVSK REGIONDIA_investment
Dnipropetrovsk region in Ukraine is one of the largest economic centers due to its advantageous geographical location and developed infrastructure. It has powerful industries such as metallurgy, mining, chemicals, and is a global leader in rocket and space technology. The region accounts for 20% of Ukraine's industrial output and has the largest reserves of minerals and metals in the country. To attract investment and support business, the regional government established the Dnipropetrovsk Regional Investment Agency which provides assistance throughout the investment process. The region aims to further modernize its industries, diversify its economy, and enhance its investment attractiveness through its development strategy until 2020.
METIS d.d. is a Croatian company that has been operating since 1948, collecting, recycling, and selling waste products. It has headquarters in Kukuljanovo and 5 branch offices across Primorsko–Goranska, Istarska, Karlovačka and Ličko -senjska counties, employing 160 workers. METIS sorts collected waste to separate useful materials, processes the waste, and prepares raw materials for sale to markets in Croatia and the EU.
The document summarizes Serbia's economy and business environment from several perspectives. It states that foreign investors generally have positive experiences operating in Serbia, citing its central location, relatively stable macroeconomic conditions, and harmonization with EU regulations. However, it notes that the government needs to better implement regulations and improve business conditions by reducing bureaucracy, increasing transparency, and fighting corruption. Large foreign companies like Coca-Cola have invested heavily in Serbia and bring economic benefits, but further reforms are still needed to attract more investment and make Serbia's business climate more competitive.
The document is an investment passport for Poltava Oblast in Ukraine created by the State Agency for Investment and National Projects of Ukraine. It provides an overview of the region's competitive advantages and investment opportunities. Section 1 describes the region, covering its geography and climate, demographics, human resources, education system, economic potential, success stories, transportation and communications infrastructure, socio-cultural sphere, and ratings. It aims to disclose and realize the region's investment potential by providing qualitative and up-to-date information to investors.
Research on the Development of Cultural Industry in Shandong ProvinceAM Publications,India
This document discusses research on the development of the cultural industry in Shandong Province, China. It begins by defining cultural industry and outlining the scope. It then analyzes the current situation of cultural industry development in Shandong, including cultural resources, demand for cultural products, and government support. Some issues are identified, such as a lack of high-level talent, low levels of industry development and regional imbalances. The document concludes by proposing recommendations to strengthen resource integration, train cultural talent, broaden industry chains through cultural industry parks, and promote integration of technology and culture to improve competitiveness.
Krajina Steel manufactures complex cast parts for the automotive industry, producing up to 400,000 casting parts per year. The company was founded in 2015 and aims to become a leading supplier in the region through high quality standards. Krajina Steel's production processes exceed industry standards, with rigorous quality control integrated at each step to ensure specifications are met. The company plans future investments to increase production volume and hire more employees.
This document provides an overview of investing in Kosovo, including:
- Kosovo aims to achieve steady annual economic growth of 7-8% through reforms focused on macroeconomic stability, infrastructure development, agriculture, and human capital.
- Kosovo offers competitive advantages for investors like low taxes between 0-10%, young workforce, privatization opportunities, and customs-free access to EU and US markets.
- The government identifies key sectors for investment as IT, mining, energy, food processing, wood processing, metals, textiles, tourism, and construction.
- Reforms are underway to improve the business climate by streamlining regulations and reducing the time and costs of starting a business.
- Serbia offers attractive free trade agreements and competitive taxes to encourage investment and trade. It is a member of CEFTA and has free trade agreements with the EU and EFTA countries, providing access to over 320 million consumers duty-free.
- The city of Niš in southern Serbia promotes itself as a business and investment destination. It has a large, skilled labor force supported by technical universities. Several foreign companies have already established operations in Niš.
- Niš aims to further develop industries like electronics, ICT and mechanical engineering. It offers industrial land, tax incentives, and workforce training programs through initiatives like its electronics cluster NICAT to attract more investment.
Ukraine is a large market in Europe with over 43 million people. It has a developing economy focused on exports and industry, with agriculture and services also important. Ukraine has rich natural resources and is a major global exporter of grains and other crops. It also has potential for growth in tourism, with natural beauty and historic sites. The document promotes Ukraine as having low costs of doing business, including cheap labor, assets, and generally high profitability across sectors. It describes the consulting agency's experience working with international clients in various industries and their services to support business development and travel in Ukraine.
The mining and metallurgy sector is one of the most competitive and dynamically developing industries of Kazakhstan. Kazakhstan has abundant natural resources with almost 100 elements discovered and 60 being actively recovered. Metallurgy occupies over 35 percent of the processing industry volume. The numbers are impressive - Kazakhstan possesses 30% of the world’s chrome ore deposits, 25% of manganese ores, 10% of iron ores.
The document outlines the agenda for a two-day event hosted by the Chamber of Commerce and Industry of Banja Luka Region. On the first day, there will be three presentations: one on avoiding common mistakes in project management, one on stories from European projects, and an introductory presentation on digital transformation. The second day will involve networking for professional fellows. Speakers will discuss tips for digital transformation, lessons from EU-funded projects, and how to avoid common pitfalls in managing initiatives.
Srbac - AGRO BIZNIS - Prilike za ulaganja i spoljnotrgovinsku saradnjukomorabl
The municipality of Srbac has great potential for agricultural investment and development due to its fertile land, long tradition of farming, and strategic location. Key opportunities include expanding greenhouse vegetable production, developing fruit orchards, and constructing facilities like refrigerators and tunnels to add value to local agricultural production. The municipality aims to further agriculture and attract agro-industry investment to create jobs and improve livelihoods in Srbac.
The document is a 2020 investment passport for the city of Enerhodar, Ukraine. It provides information to prospective national and foreign investors on the city's competitive advantages and investment opportunities. Enerhodar has a strategic location and developed infrastructure. It has a young and educated population with high employment and salaries concentrated in the energy sector. The city has a mono-functional economy dependent on two large power plants. The document outlines Enerhodar's development strategy, living conditions, budget profile, business climate, and specific investment proposals to attract new investment.
This document provides information about Latvia including:
- Key facts such as the capital Riga, population, membership in international organizations, and GDP growth outperforming the EU average.
- Overview of leading industries such as agriculture, forestry, and chemical industries as well as a description of the capital Riga and its infrastructure.
- Details on Latvia's skilled labor force, competitive tax rates, and strong transportation infrastructure including the port, rail, and Riga International Airport.
- Statistics on the tourism industry showing increases in visitors and highlighting Latvia's EU presidency in 2015.
The document provides information about the Sarajevo Macro Region (SMR) in Bosnia and Herzegovina. SMR covers an area of 8,700 km2 and has a population of over 720,000 people spread across 32 municipalities in two entities. It includes the highly populated and industrialized city of Sarajevo. The Sarajevo Development Agency (SERDA) was established in 2003 and works to promote regional economic development projects in SMR, focusing on areas like industry, tourism, rural development, education, and the environment.
INVESTMENT PROPOSALS OF DNIPROPETROVSK REGIONDIA_investment
The document discusses investment opportunities in Dnipropetrovsk region of Ukraine. It describes several industrial parks being developed in the region to attract investors, including Kryvbas Industrial Park, Pavlohrad Industrial Park, and DneprInterHub Industrial Park. It also identifies available land plots for industrial use and development of solar power stations totaling over 2,000 hectares. The Dnipropetrovsk Regional Investment Agency is introduced as the organization assisting investors with all stages of project implementation from site selection to construction and operation.
The document provides an investment guide for the Pelagonija region in Macedonia. It highlights the region's fertile soil, developed industry, energy production, and natural and cultural attractions as offering opportunities for investments in agriculture, industry, tourism and other sectors. The guide details incentives for investors including tax benefits, low labor costs, and support from local institutions. It also provides information on individual municipalities in the region and their resources and potential investment projects.
200416_ CERBA_WEBINAR_Reforms and Opportunities in Uzbekistan.ppsxJaloladdinYoqubov
The document discusses opportunities for foreign investment in Uzbekistan. It provides background on Uzbekistan's population, GDP, economic sectors, trading partners, tax system, and key industries such as agriculture, textiles, automotive, and mining. It outlines the country's development strategy and changes since 2016 to improve investment climate such as currency liberalization and tax reforms. The document also describes Uzbekistan's free economic zones and privileges for investors. It lists industries of interest such as chemicals, tourism, and mobile apps and major foreign investors. In conclusion, it promotes services from Schneider Group to support market entry and operations in Uzbekistan.
The investment passport of the city ZhmerinkaSergey Nikityuk
The city of Zhmerinka, Ukraine is inviting investors to take advantage of the city's strategic location, infrastructure, and available land plots. Zhmerinka has a population of 35,000 people and is located on a major railway line with convenient access to Kiev and other major cities. The city administration guarantees support for investors and offers several greenfield land plots ranging from 2 to 9 hectares for industrial development. The land plots have access to utilities and transportation infrastructure. Zhmerinka seeks to attract efficient investors to facilitate the growth of local industry and economy.
ECONOMIC AND INVESTMENT POTENTIAL OF DNIPROPETROVSK REGIONDIA_investment
Dnipropetrovsk region in Ukraine is one of the largest economic centers due to its advantageous geographical location and developed infrastructure. It has powerful industries such as metallurgy, mining, chemicals, and is a global leader in rocket and space technology. The region accounts for 20% of Ukraine's industrial output and has the largest reserves of minerals and metals in the country. To attract investment and support business, the regional government established the Dnipropetrovsk Regional Investment Agency which provides assistance throughout the investment process. The region aims to further modernize its industries, diversify its economy, and enhance its investment attractiveness through its development strategy until 2020.
METIS d.d. is a Croatian company that has been operating since 1948, collecting, recycling, and selling waste products. It has headquarters in Kukuljanovo and 5 branch offices across Primorsko–Goranska, Istarska, Karlovačka and Ličko -senjska counties, employing 160 workers. METIS sorts collected waste to separate useful materials, processes the waste, and prepares raw materials for sale to markets in Croatia and the EU.
The document summarizes Serbia's economy and business environment from several perspectives. It states that foreign investors generally have positive experiences operating in Serbia, citing its central location, relatively stable macroeconomic conditions, and harmonization with EU regulations. However, it notes that the government needs to better implement regulations and improve business conditions by reducing bureaucracy, increasing transparency, and fighting corruption. Large foreign companies like Coca-Cola have invested heavily in Serbia and bring economic benefits, but further reforms are still needed to attract more investment and make Serbia's business climate more competitive.
The document is an investment passport for Poltava Oblast in Ukraine created by the State Agency for Investment and National Projects of Ukraine. It provides an overview of the region's competitive advantages and investment opportunities. Section 1 describes the region, covering its geography and climate, demographics, human resources, education system, economic potential, success stories, transportation and communications infrastructure, socio-cultural sphere, and ratings. It aims to disclose and realize the region's investment potential by providing qualitative and up-to-date information to investors.
Research on the Development of Cultural Industry in Shandong ProvinceAM Publications,India
This document discusses research on the development of the cultural industry in Shandong Province, China. It begins by defining cultural industry and outlining the scope. It then analyzes the current situation of cultural industry development in Shandong, including cultural resources, demand for cultural products, and government support. Some issues are identified, such as a lack of high-level talent, low levels of industry development and regional imbalances. The document concludes by proposing recommendations to strengthen resource integration, train cultural talent, broaden industry chains through cultural industry parks, and promote integration of technology and culture to improve competitiveness.
Krajina Steel manufactures complex cast parts for the automotive industry, producing up to 400,000 casting parts per year. The company was founded in 2015 and aims to become a leading supplier in the region through high quality standards. Krajina Steel's production processes exceed industry standards, with rigorous quality control integrated at each step to ensure specifications are met. The company plans future investments to increase production volume and hire more employees.
This document provides an overview of investing in Kosovo, including:
- Kosovo aims to achieve steady annual economic growth of 7-8% through reforms focused on macroeconomic stability, infrastructure development, agriculture, and human capital.
- Kosovo offers competitive advantages for investors like low taxes between 0-10%, young workforce, privatization opportunities, and customs-free access to EU and US markets.
- The government identifies key sectors for investment as IT, mining, energy, food processing, wood processing, metals, textiles, tourism, and construction.
- Reforms are underway to improve the business climate by streamlining regulations and reducing the time and costs of starting a business.
- Serbia offers attractive free trade agreements and competitive taxes to encourage investment and trade. It is a member of CEFTA and has free trade agreements with the EU and EFTA countries, providing access to over 320 million consumers duty-free.
- The city of Niš in southern Serbia promotes itself as a business and investment destination. It has a large, skilled labor force supported by technical universities. Several foreign companies have already established operations in Niš.
- Niš aims to further develop industries like electronics, ICT and mechanical engineering. It offers industrial land, tax incentives, and workforce training programs through initiatives like its electronics cluster NICAT to attract more investment.
Ukraine is a large market in Europe with over 43 million people. It has a developing economy focused on exports and industry, with agriculture and services also important. Ukraine has rich natural resources and is a major global exporter of grains and other crops. It also has potential for growth in tourism, with natural beauty and historic sites. The document promotes Ukraine as having low costs of doing business, including cheap labor, assets, and generally high profitability across sectors. It describes the consulting agency's experience working with international clients in various industries and their services to support business development and travel in Ukraine.
The mining and metallurgy sector is one of the most competitive and dynamically developing industries of Kazakhstan. Kazakhstan has abundant natural resources with almost 100 elements discovered and 60 being actively recovered. Metallurgy occupies over 35 percent of the processing industry volume. The numbers are impressive - Kazakhstan possesses 30% of the world’s chrome ore deposits, 25% of manganese ores, 10% of iron ores.
The document outlines the agenda for a two-day event hosted by the Chamber of Commerce and Industry of Banja Luka Region. On the first day, there will be three presentations: one on avoiding common mistakes in project management, one on stories from European projects, and an introductory presentation on digital transformation. The second day will involve networking for professional fellows. Speakers will discuss tips for digital transformation, lessons from EU-funded projects, and how to avoid common pitfalls in managing initiatives.
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
The Genesis of BriansClub.cm Famous Dark WEb PlatformSabaaSudozai
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...APCO
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
How to Implement a Real Estate CRM SoftwareSalesTown
To implement a CRM for real estate, set clear goals, choose a CRM with key real estate features, and customize it to your needs. Migrate your data, train your team, and use automation to save time. Monitor performance, ensure data security, and use the CRM to enhance marketing. Regularly check its effectiveness to improve your business.
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Digital Marketing with a Focus on Sustainabilitysssourabhsharma
Digital Marketing best practices including influencer marketing, content creators, and omnichannel marketing for Sustainable Brands at the Sustainable Cosmetics Summit 2024 in New York
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
1. pRNJAVOR - The potentials for Investment in metal PROCESSING SECTOR
PRNJAVOR - Metalska industrija - Prilike za ulaganja i spoljnotrgovinsku saradnju
INVESTPRNJAVOR
2. INVESTPRNJAVOR
www.investprnjavor.com
The municipality of Prnjavor is located in the north-western part of the Republic of Srpska and Bosnia and Herzegovina, at a
distance of 50 km from the border with the Republic of Croatia/European Union. The municipality of Prnjavor is characterised by
a pronounced entrepreneurial tradition and developed agricultural production and food industry. The basis for the development of
the municipality is small and medium enterprises.
The largest number of companies operates in the field of metalworking, food and leather and footwear production, but it is also
important to mention the production capacities in the field of wood processing, furniture production and building materials.
The most important natural resources of the municipality of Prnjavor consist of agricultural land, forest resources, and, to a lesser
extent, hydro-potential and mineral deposits. Prnjavor is among the leaders in Srpska for the quantity of produced milk for pur-
chase, with 8-10 million litres of produced milk per year.
In order to improve the business environment and the efficiency of services for investors, the municipality of Prnjavor
has:
1. Conducted regulatory reform through which it enabled investors:
• reducing the costs and risks of doing business by simplifying administrative procedures within the competence of the
municipality and reducing the cost of municipal administration services,
• transparent access to information through the establishment of an E-registry available on the official municipal website
2. The Municipality of Prnjavor continuously pays the incentive funds for the development of agriculture to agricultural produc-
ers through the payment of incentives and the reimbursement of interest on agricultural loans. Since 2018, the municipality
of Prnjavor has allocated funds in the budget for stimulating employment in the economy.
3. The Municipality of Prnjavor has established a program of post-investment support to existing investors (aftercare program).
4. The Municipality of Prnjavor is in the process of certification for a Business Friendly Environment (BFC)
Karađorđeva 2, 78430 Prnjavor
+387 51 663 740 loc 232
+387 51 660 224
ler@prnjavor.ba
www.opstinaprnjavor.net
www.investprnjavor.com
3. INVESTPRNJAVOR
www.investprnjavor.com
Opština Prnjavor se nalazi u sjeverozapadnom dijelu Republike Srpske i Bosne i Hercegovine, na udaljenosti oko 50 km od granice
sa Republikom Hrvatskom/Evropskom Unijom. Opštinu Prnjavor karakterišu izražena preduzetnička tradicija i razvijena poljop-
rivredna proizvodnja te prehrambena industrija. Okosnicu razvoja opštine čine mala i srednja preduzeća.
Najveći broj preduzeća djeluje u oblasti metaloprerađivačke, prehrambene i proizvodnje kože i obuće, ali je značajno spomenuti i
proizvodne kapacitete iz oblasti prerade drveta, proizvodnje namještaja i građevinskog materijala. Najznačajnije prirodne resurse
opštine Prnjavor čine poljoprivredno zemljište, šumsko bogatstvo, a manjim dijelom hidropotencijal i mineralna nalazišta. Prnjavor
je među vodećim u Srpskoj po količini proizvedenog mlijeka za otkup, sa 8-10 miliona litara proizvedenog mlijeka godišnje.
U cilju unapređenja poslovnog okruženja i poboljšanja efikasnosti usluga za investitore, opština Prnjavor je:
1. Provela Regulatornu reformu kroz koju je investitorima omogućila:
• smanjenje troškova i rizika poslovanja kroz pojednostavljenje administrativnih postupaka u nadležnosti Opštine i sman-
jenje cijene usluga opštinske administracije,
• transparentan pristup informacijama kroz uspostavu E-registra dostupnog na zvaničnoj Internet stranici opštine
2. Opština Prnjavor kontinuirano isplaćuje podsticajna sredstva za razvoj poljoprivrede poljoprivrednim proizvođačima kroz
isplatu podsticaja i regresiranja kamata na poljoprivredne kredite. Od 2018. godine opština Prnjavor izdvaja sredstva u
budžetu za podsticaj zapošljavanja u privredi.
3. Opština Prnjavor je uspostavila program postinvesticione podrške postojećim investitorima (aftercare program).
4. Opština Prnjavor je u postupku sertifikacije za povoljno poslovno okruženje (BFC)
4. INVESTPRNJAVOR
www.investprnjavor.com
■■METAL PROCESSING
The municipality of Prnjavor is characterised by a pronounced entrepreneurial tradition. The largest number of companies in Prn-
javor is in the field of metal processing.
The metal processing sector occupies a significant place in both the overall industry of the Republic of Srpska and the industry
that is the bearer of the development of the municipality of Prnjavor. Most companies in this sector are export-oriented.
Metal processing industry of the municipality of Prnjavor records constant growth rates and represents a great opportunity for
new investments. The development of the metal sector is of great importance because this sector creates a new value added,
leading to an increase in productivity and employment.
In the municipality of Prnjavor, the most important subsectors in the field of metal processing are:
• production of reinforcing and supporting meshes, mesh for walls, ribbed and smooth rods,
• design, production and installation of hot water and steam boilers and metal constructions, execution and design of
central heating and air conditioning systems,
• metal machining and
• manufacture of metal constructions.
5. INVESTPRNJAVOR
www.investprnjavor.com
■■PRERADA METALA
Opštinu Prnjavor karakteriše izražena preduzetnička tradicija. Najveći broj preduzeća u Prnjavoru djeluje u oblasti prerade metala.
Sektor prerade metala zauzima značajno mjesto kako u ukupnoj industriji Republike Srpske, tako i u industriji koja je nosilac
razvoja opštine Prnjavor. Većina preduzeća iz ovog sektora je izvozno orijentisana.
Metaloprerađivačka industrija opštine Prnjavor bilježi konstantne stope rasta,te predstavlja odličnu priliku za nove investicije.
Razvijanje metalskog sektora je od velikog značaja jer ovaj sektor stvara novododatu vrijednost, što dovodi do povećanja produk-
tivnosti i zaposlenosti.
U opštini Prnjavor, najznačajniji podsektori u oblasti prerade metala su:
• Proizvodnja armaturnih i nosivih mreža, mreža za zidove, rebrastih i glatkih šipki,
• Projektovanje, proizvodnja i instalacija toplovodnih i parnih kotlova i metalnih konstrukcija, izvođenje i projektovanje
sistema centralnog grijanja i klimatizacije,
• Mašinska obrada metala, kao i
• Proizvodnja metalnih konstrukcija.
6. INVESTPRNJAVOR
www.investprnjavor.com
In 2020 Prnjavor will be a place where people from this area, no matter where they are now and to which national-
ity they belong, based on their entrepreneurship, knowledge and business connections, will achieve a strong inflow
of investments and a dynamic development of the local economy. As a result of this ten-year economic turmoil and
social progress, Prnjavor will become "Europe in small", with a better quality of life, developed social and utility
infrastructure, a tourist attractive and preserved environment, recognisable by the image of multiculturalism and
tolerance.
In the metal industry, in the territory of the municipality of Prnjavor, in 2017, there were 17 companies, representing a share of
4% in the total number of enterprises in this sector in the Republic of Srpska and 7.2% of the total number of enterprises in the
municipality of Prnjavor. The number of metal sector companies in the total number of processing enterprises in the municipality
of Prnjavor participates with 27.4% and represents one of the most important sectors within the manufacturing industry. In 2017
the metal processing sector employed 640 people, thus representing a share of 6% in the total number of employees in the metal
industry of Srpska. Employees in the metal processing sector account for 17% of the total number of employees in the municipal-
ity of Prnjavor.Metal processing companies from Prnjavor generated 101.3 million KM of revenues, which makes 15% of the total
income of the economy of the entire municipality in 2017.
The most important companies in the field of metal processing are:
METALEX d.o.o; ARMAKO d.o.o; DiS EUROSTANDARD d.o.o; TOPLING d.o.o; TOPINOX d.o.o; FERROSTIL-MONT d.o.o;
STARTPRODUKT d.o.o; STEEL TECHNOLOGY d.o.o; MOSER DiS d.o.o; RASPROM d.o.o; TEŠIĆ d.o.o.
The most important companies in the field of wood processing according to the total income in 2017 and the trend in relation to
the previous year:
The most important companies in the field of wood processing according to the number of employees in 2017 and the trend in
relation to the previous year:
The most important companies in the field of wood processing according to the net profit in 2017 and the trend in relation to the
previous year:
1. METALEX d.o.o. (growth of 2,8%)
2. ARMAKO d.o.o. (growth of 25%)
3. DiS EUROSTANDARD d.o.o. (growth of 16,8%)
1. TOPLING d.o.o. (growth of 8%)
2. METALEXd.o.o. (growth of 9%)
3. DiS EUROSTANDARD d.o.o. (growth of36%)
1. DiS EUROSTANDARD d.o.o. (growth of 14,9%)
2. TOPINOX d.o.o. (growth of 29,2%)
3. METALEX d.o.o. (fall of 28,8%)
7. INVESTPRNJAVOR
www.investprnjavor.com
Prnjavor 2020. godine će biti mjesto gdje će ljudi sa ovog područja, ma gdje se trenutno nalazili i kom narodu
pripadali, na osnovu svoje preduzetnosti, znanja i poslovnih veza, ostvariti snažan priliv investicija i dinamičan
razvoj lokalne privrede. Kao rezultat ovakvog desetogodišnjeg privrednog zamaha i društvenog napretka, Prnjavor
će od „Male Evrope“, postati „Evropa u malom“, sa boljim kvalitetom života, razvijenom društvenom i komunalnom
infrastrukturom, turistički atraktivnom i očuvanom životnom sredinom, prepoznatljiv po imidžu multikulturalnosti
i tolerantnosti.
U metaloprerađivačkoj industriji, na području opštine Prnjavor, u 2017. godini djelatnost je obavljalo 17 preduzeća, što predstavlja
učešće od 4% u ukupnom broju preduzeća ovog sektora u Republici Srpskoj i 7,2% ukupnog broja preduzeća opštine Prnjavor.
Broj preduzeća metalnog sektora u ukupnom broju preduzeća prerađivačke industrije u opštini Prnjavor učestvuje sa 27,4% i
predstavlja jedan od najznačajnijih sektora u okviru prerađivačke industrije. U sektoru prerade metala je u 2017. godini radilo
640 lica, što u ukupnom broju zaposlenih u metaloprerađivačkoj industriji Srpske predstavlja učešće od 6%. Zaposleni u sektoru
prerade metala učestvuju sa 17%u ukupnom broju zaposlenih na području opštine Prnjavor. Metaloprerađivači iz Prnjavora su
ostvarili 101,3 miliona KM prihoda što je 15% od ukupnog prihodaprivrede cijele opštine u 2017.
Najznačajnija preduzeća u oblasti prerade metala:
METALEX d.o.o; ARMAKO d.o.o; DiS EUROSTANDARD d.o.o; TOPLING d.o.o; TOPINOX d.o.o; FERROSTIL-MONT d.o.o;
STARTPRODUKT d.o.o; STEEL TECHNOLOGY d.o.o; MOSER DiS d.o.o; RASPROM d.o.o; TEŠIĆ d.o.o.
1. METALEX d.o.o. (rast od 2,8%)
2. ARMAKO d.o.o. (rast od 25%)
3. DiS EUROSTANDARD d.o.o. (rast od 16,8%)
1. TOPLING d.o.o. (rast od 8%)
2. METALEXd.o.o. (rast od 9%)
3. DiS EUROSTANDARD d.o.o. (rast od 36%)
1. DiS EUROSTANDARD d.o.o. (rast od 14,9%)
2. TOPINOX d.o.o. (rast od 29,2%)
3. METALEX d.o.o. (pad od 28,8%)
Najznačajnija preduzeća u oblasti prerade drveta prema visini ostvarenog prihoda u 2017. godini i trend u odnosu na
prethodnu godinu:
Najznačajnija preduzeća u oblasti prerade drveta prema broju zaposlenih u 2017. godini i trend u odnosu na
prethodnu godinu:
Najznačajnija preduzeća u oblasti prerade drveta prema neto dobiti ostvarenoj u 2017. godini i trend u odnosu na
prethodnu godinu:
8. INVESTPRNJAVOR
www.investprnjavor.com
■■BUSINESS-TOURIST ZONE VIJAKA
The business-tourist zone Vijaka has two parts - the northern one which is intended for the business-industrial zone and the
southern part for tourism and recreation.The space of the business industrial zone is divided into 120 plots where different activi-
ties are performed.The southern part of the zone possesses great tourist potential with the existence of horse farm Vučijak, which
is owned by the Government of the Republic of Srpska and makes this site attractive for the construction of catering facilities,
such as restaurants, bungalows, sports and recreation grounds and excursions.
The zone is located 2.5 km from the centre of Prnjavor and has excellent traffic connections since it is located near the highway
"9. januar“ Banja Luka-Doboj as well as near the main road Banja Luka-Prnjavor-Derventa (M-16.1) and the crossroads of the
main road (M-16.1) with the regional road (R-474) Čelinac-Prnjavor-Srbac and (R-476) Srbac-Prnjavor-Doboj. Businessmen who
have their production facilities in the zone have easier placement of products, both in the region and wider. Highway "9. janu-
ar"crosses this zone into two parts, business-industrial and tourist-recreational.
Business-tourist zone Vijaka is intended for Greenfield investments, which are the most attractive type of investment in new
capacities, as they bring explosive growth of economic activities and new employment. Namely, this type of investment implies
that the business starts from the beginning, from the purchase of land, the construction of business facilities to the employment
of workers.
9. INVESTPRNJAVOR
www.investprnjavor.com
■■POSLOVNO-TURISTIČKA ZONA VIJAKA
Poslovno-turistička zona Vijaka ima dva dijela – sjeverni koji je namijenjen za poslovno-industrijsku zonu i južni dio za turizam
i rekreaciju. Prostor poslovno industrijske zone je podijeljen na 120 parcela u kojima se obavljaju različite djelatnosti. Južni dio
zone posjeduje veliki turistički potencijal postojanjem ergele Vučijak koja se nalazi u vlasništvu Vlade Republike Srpske i čini ovaj
lokalitet atraktivnim za izgradnju ugostiteljskih sadržaja, kao što su restorani, bungalovi, tereni za sport i rekreaciju, te izletišta.
Zona se nalazi 2,5 km od centra Prnjavora i ima odličnu saobraćajnu povezanost jer se nalazi u blizini autoputa „9. Januar“ Banja
Luka-Doboj kao i magistralnog puta Banjaluka-Prnjavor-Derventa (M-16.1) i raskrsnice magistralnog puta (M-16.1) sa regional-
nim putem (R-474) Čelinac–Prnjavor–Srbac i (R-476) Srbac–Prnjavor–Doboj. Privrednici koji imaju svoje proizvodne pogone u
zoni ostvaruju lakši plasman proizvoda, kako u regionu tako i šire. Autoput “9. januar” presjeca ovu zonu na dva dijela, poslovno–
industrijski i turističko–rekreativni.
Poslovno-turistička zona Vijaka je namijenjena za greenfield investicije koje predstavljaju najpoželjniji vid ulaganja u nove kapac-
itete, jer donose eksplozivni rast privrednih aktivnosti i nova zapošljavanja. Naime, ova vrsta investicije podrazumijeva da se sa
poslom počinje od početka, od otkupa zemljišta, izgradnje poslovnih objekata do zapošljavanja radnika.
10. *Number of employees in 2017; Source: APIF
METALEX d.o.o.Magistralni put bb
+387 51 645 610,
www.metalex.ba
metalex@blic.net
25.93 Manufacture of wire products, chain and springs
■■ BASIC PRODUCTS
Metalex d.o.o. is predominantly a trading company, with a small
share of production.
The offer of the company consists of nails, chains and wire
products, construction and painting tools, foils, electro materi-
als, paints and facades, electrodes, cutting and abrasive mate-
rials and locks and hardware.
■■ VISION AND MISSION
The vision of Metalex d.o.o. is the expansion and strengthening
of the position in the wholesale and retail market.
"Recognise us as your right partner!"
Today, Metalex takes a leading position in the region and has a steady increase in market share. Company Met-
alex d.o.o. markets its products to the markets of Italy, Germany, the Netherlands, Greece, Turkey, China, and the
markets of the countries in the region. In the coming period the plan is to expand and improve the product range.
Year of establishment: 1978 Number of employees: 121* Size: MEDIUM
11. *Broj zaposlenih u 2017. godini; Izvor: APIF
Godina osnivanja: 1978. Broj zaposlenih: 121* Veličina: SREDNJE
25.93 Proizvodnja proizvoda od žice, lanaca i opruga
■■ OSNOVNI PROIZVOD
Preduzeće Metalex d.o.o. je pretežno trgovačko društvo, sa
malim udjelom proizvodnje.
Ponudu preduzeća čine ekseri, lanci i žičani proizvodi,
građevinski i molerski alat, folije, elektromaterijal, boje i fasade,
elektrode, rezni i brusni materijal i brave i okovi.
■■ VIZIJA I MISIJA
Vizija preduzeća Metalex d.o.o. je širenje i jačanje pozicije na
tržištu veleprodaje i maloprodaje.
„Prepoznajte nas i vi kao korektnog partnera!“
Metalex danas zauzima lidersku poziciju u regionu i ima obezbjeđen stalan rast udjela na tržištu. Preduzeće Metal-
ex d.o.o. svoje proizvode plasira na tržišta Italije, Njemačke, Holandije, Grčke, Turske, Kine, kao i na tržišta zemalja
u okruženju. U narednom periodu u planu je proširenje i poboljšanje asortimana proizvoda.
12. ARMAKO d.o.o.Banjalučki Put 21
+387 51 648 391
www.armako.com
armako@inecco.net
25.11 Manufacture of metal structures and parts of structures
■■ BASIC PRODUCT
Basic product of company Armako d.o.o. is a reinforcing net.
In addition, the company deals with the processing of concrete
iron, the production of reinforcement bars for piles, smooth and
ribbed rods, stirrups and other iron products.
■■ VISION AND MISSION
Mission of existence and business of company Armako d.o.o. is
achieved by meeting the needs and wishes of stakeholders for
the process of production of reinforcement nets with complete
control of the environmental impact. In the development vision
the company Armako d.o.o. puts the satisfaction of its custom-
ers to the first place, and thus the success of the company,
through increasing the production and sales of reinforcement
nets.
Company Armako d.o.o. strives to be among the leading com-
panies in Bosnia and Herzegovina by quality of its products and
services.
■■ DEVELOPMENT GOALS
For achieving the policy and goals set, the company Armako
d.o.o. has established, documented and implemented quality
management systems according to the ISO 9001:2008 standard
and environmental protection according to the ISO 14001:2004
standard. In the following period, the company plans to expand
the production program and hire up to 50 new employees.
Company Armako d.o.o. achieves the current volume of work of 25 000 tons. Of this amount, 60-70% is exported
to the markets of Hungary, Croatia, Montenegro, Serbia and Slovenia. In addition to expanding operations in the
markets of Slovenia, Austria and Hungary, the main goal of the company is to expand the business in Serbia, where
a new plant is opened, which represents a significant investment of the company.
Year of establishment: 1998 Number of employees: 35* Size: SMALL
*Number of employees in 2017; Source: APIF
13. 25.11 Proizvodnja metalnih konstrukcija i njihovih djelova
■■ OSNOVNI PROIZVOD
Osnovni proizvod preduzeća Armako d.o.o. je armaturna mreža.
Pored toga preduzeće se bavi i obradom betonskog željeza, iz-
radom armaturnih koševa za šipove, glatkih i rebrastih šipki,
uzengija i drugih proizvoda od željeza.
■■ VIZIJA I MISIJA
Misija postojanja i poslovanja preduzeća Armako d.o.o. ost-
varuje se zadovoljenjem potreba i želja zainteresovanih strana
za proces proizvodnje armaturnih mreža uz potpunu kontrolu
uticaja na zaštitu životne sredine. U viziji razvoja preduzeće
Armakod.o.o. postavlja na prvo mjesto zadovoljstvo svojih
kupaca, a time i uspjeh preduzeća, kroz povećanje proizvodnje
i prodaje armaturnih mreža.
Preduzeće Armako d.o.o. teži tome da po kvalitetu svojih proiz-
voda i usluga bude među vodećim preduzećima u Bosni i Her-
cegovini.
■■ RAZVOJNI CILJEVI
Za ostvarivanje politike i postavljenih ciljeva, preduzeće Arma-
ko d.o.o. je uspostavilo, dokumentovalo i realizovalo sisteme
menadžmenta, kvalitetom prema standardu ISO 9001:2008 i
zaštitom životne sredine prema standardu ISO 14001:2004.
U narednom periodu preduzeće planira proširenje proizvodnog
programa i zapošljavanje do 50 novih radnika.
Preduzeće Armako d.o.o. ostvaruje trenutni obim posla od 25.000 tona. Od te količine, 60-70% se izvozi na tržišta
Mađarske, Hrvatske, Crne Gore, Srbije i Slovenije. Pored proširenja poslovanja na tržištima Slovenije, Austrije i
Mađarske, osnovni cilj preduzeća je širenje poslovanja u Srbiji, gdje je otvoren novi pogon koji predstavlja značajnu
investiciju preduzeća.
Godina osnivanja: 1998. Broj zaposlenih: 35* Veličina: MALO
*Broj zaposlenih u 2017. godini; Izvor: APIF
14. DiS EUROSTANDARD
d.o.o.
Magistralni put bb
+387 51 640 480
diseurostandard@blic.net
25.11 Manufacture of metal structures and parts of structures
■■ BASIC PRODUCT
Basic products of the company DiS Eurostandard d.o.o. are a
vacuum solar collector and shelves for markets. The company
is engaged in the production of shelves and constructions for
cooling showcases and condensers for cooling technology.
■■ VISION AND MISSION
Company DiS Eurostandard d.o.o. wants to become a leading
company in this field in the region and beyond.
■■ DEVELOPMENT GOALS
In the coming period, company DiS Eurostandard d.o.o. plans
technological advancement through the development of its
own product. The goal of the company is to enter the European
Union market with its basic products.
Company DiS Eurostandard d.o.o. markets its products to the markets of Austria, Italy, Germany and Croatia. Plan
is to expand into new markets.
Year of establishment: 2005 Number of employees: 102* Size: MEDIUM
*Number of employees in 2017; Source: APIF
15. 25.11 Proizvodnja metalnih konstrukcija i njihovih dijelova
■■ OSNOVNI PROIZVOD
Osnovni proizvodi preduzeća DiS Eurostandard d.o.o. su vakumski solarni kolektor i police za markete.Preduzeće se bavi i proiz-
vodnjom polica i konstrukcija za rashladne vitrine i kondenzatora za rashladnu tehniku.
■■ VIZIJA I MISIJA
Preduzeće DiS Eurostandard d.o.o. želi da postane vodeće preduzeće u ovoj oblasti u regionuai šire.
■■ RAZVOJNI CILJEVI
PreduzećeDiS Eurostandard d.o.o. u narednom periodu planira tehnološki napredakkroz razvoj vlastitog proizvoda. Cilj preduzeća-
je da sa svojim osnovnim proizvodima izađe na tržište Evropske unije.
Preduzeće DiS Eurostandard d.o.o. svoje proizvode plasira na tržišta Austrije, Italije, Njemačke i Hrvatske. U planu
je i proširenje na nova tržišta.
Godina osnivanja: 2005. Broj zaposlenih: 102* Veličina: SREDNJE
*Broj zaposlenih u 2017. godini; Izvor: APIF
16. TOPLING d.o.o.Vojvode Stepe 6
+387 51 645 100
+387 65 624 359
www.topling.com
info.topling@gmail.com
25.21 Manufacture of central heating radiators and boilers
■■ BASIC PRODUCT
Company Topling d.o.o. is engaged in the production of hot wa-
ter boilers on biomass for heating of households and industrial
facilities. The company produces about 5 000 household boil-
ers annually, with power of 15-100 kW and about 50 systems
for an industrial program of power from 250 to 6 000 kW. The
production program consists of five different product groups:
solid fuel boilers, pellet boilers, biomass boilers, electric boilers
and other associated equipment for thermal power plants.
■■ VISION AND MISSION
The basic commitment of Topling d.o.o. is to become the lead-
ing manufacturer of industrial systems in Southeast Europe,
and increase the maximum installed power to 12 000 kW.
■■ DEVELOPMENT GOALS
In the upcoming period, Topling plans to automate the produc-
tion by purchasing additional robots and automated lines so as
to increase the productivity.
Year of establishment: 1993 Number of employees: 174* Size: MEDIUM
Company Topling d.o.o. exports its products to European Union markets and countries in the region. Some of the
best export markets are Great Britain, Austria, Slovenia, Croatia, Serbia, Romania and Ukraine. By purchasing
robots and automated lines for sheet processing, the company will have the opportunity to respond to possible
increase in cooperation with foreign partners.
The company's plan is to expand its cooperation with countries such as Germany, the Netherlands, Belgium, and
the Scandinavian countries in the upcoming period.
*Number of employees in 2017; Source: APIF
17. 25.21 Proizvodnja radijatora i kotlova za centralno grijanje
■■ OSNOVNI PROIZVOD
Preduzeće Topling d.o.o. se bavi izradom toplovodnih kotlova na
biomasu za zagrijavanje domaćinstava i industrijskih objekata.
Preduzeće godišnje proizvodi oko 5.000 kotlova za domaćinst-
vo, snage od 15-100 kW i oko 50 sistema za industrijski pro-
gram snage od 250 do 6.000 kW. Proizvodni program čini pet
različitih grupa proizvoda: kotlovi na čvrsto gorivo, kotlovi na
pelet, kotlovi na biomasu, elektro kotlovi te ostala prateća opre-
ma za termoenergetska postrojenja.
■■ VIZIJA I MISIJA
Osnovno opredjeljenje preduzeća Topling d.o.o. je da postane
vodeći proizvođač industrijskih sistema u jugoistočnoj Evropi,
te poveća maksimalnuinstalisanu snagu na 12.000 kW.
■■ RAZVOJNI CILJEVI
Topling u narednom periodu planira da automatizuje proizvod-
nju kupovinom dodatnih robota i automatizovanih linija kako bi
se povećala produktivnost proizvodnje.
Godina osnivanja: 1993. Broj zaposlenih: 174* Veličina: SREDNJE
Privredno društvo Topling d.o.o. svoje proizvode izvozi na tržišta Evropske unije i u zemalja u regionu. Neka od
najboljih izvoznih tržišta su Velika Britanija, Austrija, Slovenija, Hrvatska, Srbija, Rumunija i Ukrajina. Kupovinom
robota i automatizovanih linija za obradu lima, preduzeće će imati mogućnost da odgovori na eventualno povećanje
saradnje sa inostranim partnerima.
Plan preduzeća je da u narednom periodu proširi saradnju sa zemljama sa kojima nema veliku razmjenu, kao što
su Njemačka, Holandija, Belgija, te Skandinavske zemlje.
*Broj zaposlenih u 2017. godini; Izvor: APIF
18. TOPINOX d.o.o.Karac bb
+387 51 655 567
www.topinox.info
mirko.topic@yahoo.com
25.11 Manufacture of metal structures and parts of structures
■■ BASIC PRODUCT
Basic products of Topinox d.o.o. are all types of stainless steel.
The range of enterprise products covers a large number of dif-
ferent areas with particular emphasis on parts or assemblies of
demanding manufacture in the field of food industry, such as
cradles and casings of various industrial machines, and med-
ical equipment and consumer goods. The activity of the com-
pany is the production of all products of stainless steel, of a
greater or lesser degree of complexity.
The technology Topinox d.o.o. has provides it with the ability to
perform laser cutting services, water jet cutting, bending, deep
drawing, welding, grinding and controlling metal products.
■■ VISION AND MISSION
The goal of the business of the company Topinox d.o.o. is meet-
ing customer needs and overcoming their expectations, as well
as rounding up the production process. By constant action and
monitoring in the market of goods and services, both in the
country and abroad, and with the displayed quality and mode
of production, the company comes in a position that enables
continuous growth and development in the future.
■■ DEVELOPMENT GOALS
The main goal of Topinox d.o.o. is an increase in market share
in the European Union.
Year of establishment: 2001 Number of employees: 40* Size: SMALL
Topinox d.o.o. has a stable position on the market in which it operates and its presentation and quality is very
recognisable among customers. The company covers 95% of its production capacity for export to foreign coun-
tries. Topinox customers are companies from Austria, Germany, Switzerland, Sweden and America, with which
the company has a successful cooperation for many years.
*Number of employees in 2017; Source: APIF
19. 25.11 Proizvodnja metalnih konstrukcija i njihovih dijelova
■■ OSNOVNI PROIZVOD
Osnovni proizvodi preduzeća Topinox d.o.o. su sve vrste nerđa-
jućeg čelika. Asortiman proizvoda preduzeća pokriva velik broj
različitih područja sa posebnim naglaskom na dijelove ili sklop-
ove zahtjevne izradeu oblasti prehrambene industrije, kao što
su postolja i kućišta raznih industrijskih mašina, te medicins-
ka oprema i elementi široke potrošnje. Djelatnost preduzeća
je izrada svih proizvoda od inoksa, većeg ili manjeg stepena
složenosti.
Tehnologija kojom Topinox d.o.o. raspolaže pruža mogućnost
vršenja usluga laserskog sječenja, sječenja vodenim mlazom,
savijanja, dubokog izvlačenja, zavarivanja, brušenja i kontrole
proizvoda od metala.
■■ VIZIJA I MISIJA
Cilj poslovanja privrednog društva Topinox d.o.o. je zadovoljen-
je potrebe kupaca i prevazilaženje njihovih očekivanja, te za-
okruženost procesa proizvodnje. Stalnim djelovanjem i praćen-
jem na tržištu robe i usluga, kako u zemlji tako i inostranstvu, te
prikazanim kvalitetom i načinom proizvodnje, preduzeće dolazi
u poziciju koja omogućava stalni rast i razvoj u budućnosti.
■■ RAZVOJNI CILJEVI
Osnovni cilj preduzeća Topinox d.o.o. je povećanje učešća na
tržištu Evropske unije.
Godina osnivanja: 2001. Broj zaposlenih: 40* Veličina: MALO
Topinox d.o.o. posjeduje stabilnu poziciju na tržištu na kojem posluje i svojim prezentacijama i kvalitetom je uve-
liko prepoznatljivo kod kupaca. Preduzeće 95% svog proizvodnog kapaciteta pokriva izvozom u strane zemlje.
Kupci Topinoxa su kompanije iz Austrije, Njemačke, Švajcarske, Švedske i Amerike, sa kojima preduzeće ostvaruje
dugogodišnju uspješnu saradnju.
*Broj zaposlenih u 2017. godini; Izvor: APIF
20. FERROSTIL-MONT
d.o.o.
Jovana Dučića 6
+387 51 660 530
www.ferrostilmont.com
info@ferrostilmont.com
25.11 Manufacture of metal structures and parts of structures
■■ BASIC PRODUCT
FERROSTIL-MONT d.o.o. is a company that has a wide produc-
tion program:
1. design of prefabricated buildings for different purposes,
2. production and installation of steel structures,
3. production of cranes and multipurpose containers,
4. production of lighting poles and pillars of road signage
and
5. production of cold-forming machines, freight cranes and
internal transport equipment.
■■ VISION AND MISSION
Vision of the company FERROSTIL-MONT d.o.o. is to be a syn-
onym for a company that constantly sets higher standards, both
in the field of design, production and sales of steel structures
and machines, as well as in the area of customer relationship
and new business trends. FERROSTIL-MONT d.o.o. has a stra-
tegic interest in being a leader in its business and permanently
working on additional optimisation and improvement of the ef-
ficiency and effectiveness of the entire business. The business
process uses a process approach, which includes the "Plan-
Do-Check-Act-PDCA" cycle and risk-based thinking.
Company FERROSTIL-MONT d.o.o. is focused on continuous
improvement of product quality and improvement and develop-
ment of partnership relations with stakeholders. It also focuses
on continuous planned education, training and motivation of
employees with the aim of efficient and quality execution of
existing and new jobs.
Year of establishment: 2012 Number of employees: 83* Size: MEDIUM
FERROSTIL-MONT d.o.o. is present on the foreign market with the core product, steel structure. The company's products are
placed on the markets of Slovenia, Croatia and Austria. Part of the production of the company is placed on the market of the
European Union through intermediaries. The current position on the market is not satisfactory, as there are no long-term con-
tracts on the delivery and production of product series, but it is only about individual orders. In 2018 company certification
was carried out and CE mark for steel construction was introduced, which is a prerequisite for a successful cooperation with
foreign partners. In the following period, the company will strive to establish contacts with potential buyers and to establish
long-term contracts for cooperation and continuous delivery to the European Union market.
*Number of employees in 2017; Source: APIF
21. 25.11 Proizvodnja metalnih konstrukcija i njihovih dijelova
■■ OSNOVNI PROIZVOD
FERROSTIL-MONT d.o.o. je preduzeće koje ima širok proizvodni
program:
1. projektovanje montažnih objekata za različite namjene,
2. izrada i montaža čeličnih konstrukcija,
3. proizvodnja dizalica i višenamjenskih kontejnera,
4. proizvodnja rasvjetnih stubova i stubova putne signal-
izacije i
5. proizvodnja mašina za obradu lima hladnom deformaci-
jom, mosnih dizalica i opreme za unutrašnji transport.
■■ VIZIJA I MISIJA
Vizija preduzeća FERROSTIL-MONT d.o.o.je da bude sinonim za
preduzeće koje stalno postavlja više standarde, kako u oblas-
ti projektovanja, proizvodnje i prodaje čeličnih konstrukcija i
mašina, tako i u oblasti odnosa sa korisnicimaproizvoda i novim
trendovima poslovanja. FERROSTIL-MONT d.o.o. ima strateški
interes da bude lider u svojoj djelatnosti i da permanentno radi
na dodatnoj optimizaciji i poboljšanju efikasnosti i efektivno-
sti kompletnog poslovanja. U poslovanju preduzeća koristi se
procesni pristup, koji uključuje ciklus „planirajte–uradite–prov-
jerite–djelujte (Plan–Do–Check–Act–PDCA)” i razmišljanje zas-
novano na riziku.
Privredno društvo FERROSTIL-MONT d.o.o. je usmjereno na
stalno poboljšanje kvaliteta proizvoda, unapređenje i razvijanje
partnerskih odnosa sa zainteresovanim stranama. Ta kođe je
usmjereno i na stalno plansko obrazovanje, obukui motivisanje
zaposlenih u cilju efikasnog i kvalitetnog izvršavanja postojećih
i novih poslova.
FERROSTIL-MONT d.o.o. je na inostranom tržištu prisutno sa proizvodom osnovne djelatnosti, čeličnom konstrukcijom. Pre-
duzeće proizvod plasira na tržišta Slovenije, Hrvatske i Austrije. Dio proizvodnje preduzeća se plasira na tržište Evropske
unije preko posrednika.Trenutna pozicija na tržištu nije zadovoljavajuća, jer ne postoje dugoročni ugovori o isporuci i proiz-
vodnji serija proizvoda, već se radi samo o pojedinačnim narudžbama. U 2018. godini sprovedena je sertifikacija preduzeća i
uveden CE znak za čeličnu konstrukciju, što predstavlja preduslov za uspješnu saradnju sa inostranim partnerima. U nared-
nom periodu preduzeće će nastojati da ostvari kontakte sa potencijalnim kupcima i sklopi dugoročne ugovore za saradnju i
kontinuiranu isporuku na tržište Evropske unije.
Godina osnivanja: 2012. Broj zaposlenih: 83* Veličina: SREDNJE
*Broj zaposlenih u 2017. godini; Izvor: APIF
22. STARTPRODUKT
d.o.o.
Magistralni put bb
+387 65 770 647
www.startprodukt.ba
gdjekic@gmail.com
25.11 Manufacture of metal structures and parts of structures
■■ BASIC PRODUCT
Company STARTPRODUKT d.o.o. is engaged in making PVC and
aluminium joinery.
Also, the company carries out the construction and installation
of steel structures.
■■ VISION AND MISSION
Long-term goal of the company STARTPRODUKT d.o.o. is to
achieve the best possible placement of its products and ser-
vices on the markets of the European Union and other coun-
tries. Currently, the company iscommitted to modernise the
production process with as little human factor as possible.
Company STARTPRODUKT d.o.o. plans to introduce modern
technology into the production process. The goal is to do the
work on CNC machines instead of the existing semi-automatic
machines.
Year of establishment: 1993 Number of employees: 16* Size: SMALL
Company STARTPRODUKT d.o.o. exports 5% of its current production volume.
The company is not satisfied with the current position on the foreign market and plans to increase its participation
in the European Union market in the upcoming period.
*Number of employees in 2017; Source: APIF
23. 25.11 Proizvodnja metalnih konstrukcija i njihovih dijelova
■■ OSNOVNI PROIZVOD
Preduzeće STARTPRODUKT d.o.o. se bavi izradom PVC i alu-
minijumske stolarije.
Takođe, preduzeće vrši izradu i montažu čeličnih konstrukcija.
■■ VIZIJA I MISIJA
Dugoročni cilj preduzeća STARTPRODUKT d.o.o. je da ostvari
što veći plasman svojih proizvoda i usluga na tržišta Evropske
unije i drugih zemalja. Trenutno opredjeljenje preduzeća je
modernizacija procesa proizvodnje sa što manjim udjelom ljud-
skog faktora.
Preduzeće STARTPRODUKT d.o.o. ima u planu uvođenje
savremene tehnologije u proces proizvodnje. Cilj je da se
posao obavlja na CNC mašinama umjesto dosadašnjih poluau-
tomatskih strojeva.
Godina osnivanja: 1993. Broj zaposlenih: 16* Veličina: MALO
Preduzeće STARTPRODUKT d.o.o. izvozi 5% od trenutnog obima proizvodnje.
Preduzeće nije zadovoljno trenutnom pozicijom na inostranom tržištu i ima u planu da u narednom periodu poveća
svoje učešće na tržištu Evropske unije.
*Broj zaposlenih u 2017. godini; Izvor: APIF
24. STEEL TECHNOLOGY
d.o.o.
Bože Tatarevića 74
+387 51 647 570
andrej.steeltechnologydoo@gmail.com
25.93 Manufacture of wire products, chain and springs
■■ BASIC PRODUCT
Basic products of STEEL TECHNOLOGY d.o.o. are net of steel
ropes and steel wire for the protection of civilian and military
facilities. These products are used in the protection of road in-
frastructure and settlements from rocks, protection against tor-
rential floods and protection against snow-covered avalanches.
■■ VISION AND MISSION
The basic commitment of STEEL TECHNOLOGY d.o.o. is the
continuous improvement of production technology with the
continuous implementation of research and development, i.e.
the construction of new machines, the improvement of existing
and application of new raw materials for the production of fin-
ished products.
■■ DEVELOPMENT GOALS
In the following period the company STEEL TECHNOLOGY d.o.o.
plans to complete the construction and commissioning of a
new production machine with the application of the relevant
standards of the European Union and, consequently, the begin-
ning of the construction of a new type of protective net. Also,
the modernisation of existing machines is planned, so that the
company will continue to be competitive on the European Union
market.
Year of establishment: 2007 Number of employees: 21* Size: SMALL
"We can proudly say that we are present in the world market."
STEEL TECHNOLOGY d.o.o. through its cooperation with foreign partners, markets products to the markets of the
European Union, Asia and Africa. The company is satisfied with the current position in the foreign market and will
endeavour to retain it by continuously improving its existing capacities with the constant improvement of technol-
ogy.
*Number of employees in 2017; Source: APIF
25. 25.93 Proizvodnja proizvoda od žice, lanaca i opruga
■■ OSNOVNI PROIZVOD
Osnovni proizvodi preduzeća STEEL TECHNOLOGY d.o.o. su
mreže od čeličnih užadi i čelične žice za zaštitu civilnih i vojnih
objekata. Ovi proizvodi se koriste u zaštiti putne infrastrukture i
naselja od odrona stijena ili kamenja, zaštita od bujičnih popla-
va i zaštita od sniježnih lavina.
■■ VIZIJA I MISIJA
Osnovno opredjeljenje preduzeća STEEL TECHNOLOGY d.o.o. je
konstantno unapređenje tehnologije proizvodnje uz kontinuira-
no provođenje istraživanja i razvoja, odnosno konstruisanje
novih mašina, poboljšanje postojećih i primjena novih sirovina
za izradu gotovog proizvoda.
■■ RAZVOJNI CILJEVI
Planovi privrednog društva STEEL TECHNOLOGY d.o.o. u nared-
nom periodu su završetak konstrukcije i puštanje u rad nove
proizvodne mašine sa primjenom odgovarajućih standarda Ev-
ropske unije i samim tim početak izrade novog tipa zaštitne
mreže. Takođe, u planu je i modernizacija postojećih mašina
kako bi preduzeće i dalje bilo konkurentno na tržištu Evropske
unije.
Godina osnivanja: 2007. Broj zaposlenih: 21* Veličina: MALO
„Možemo sa ponosom reći da smo prisutni na svjetskom tržištu.“
Preduzeće STEEL TECHNOLOGY d.o.o. preko saradnje koju ostvaruje sa inostranim partnerima plasira proizvode na
tržišta Evropske unije, Azije i Afrike. Preduzeće je zadovoljno trenutnom pozicijom na inostranom tržištu i trudiće
se da je zadrži, tako što će kontinuirano unapređivatipostojeće kapacitete uz konstantno unapređenje tehnologije.
*Broj zaposlenih u 2017. godini; Izvor: APIF
26. MOSER DiS d.o.o.Magistralni put bb
+387 51 640 480
+387 65 446 923
www.moser-dis.com
moser-dis@blic.net
25.62 Machining
■■ BASIC PRODUCT
Company MOSER DiS d.o.o. deals with laser cutting and CNC
punching. The company operates as a representative of the
company Franz MOSER GmbH - Spittal/Austria for the territory
of Bosnia and Herzegovina.
■■ VISION AND MISSION
The goal of MOSER DiS d.o.o. is to satisfy the needs of the mar-
ket of Bosnia and Herzegovina in terms of quality metalworking
machines, and that customers gain trust and security in the
brand MOSER DiS.
Year of establishment: 2008 Number of employees: 20* Size: SMALL
Company MOSER DiS d.o.o. which acts as a representative of the company Franz MOSER GmbH – Spittal/Austria
is known for its concern for its customers and partners both in Austria and throughout Europe. The company also
provides consulting services for the selection of machines as well as the maintenance it provides within 48 hours.
*Number of employees in 2017; Source: APIF
27. 25.62 Mašinska obrada metala
■■ OSNOVNI PROIZVOD
Preduzeće MOSER DiS d.o.o. se bavi laserskim sječenjem
i CNC probijanjem. Preduzeće posluje kao zastupnik firme
Franz MOSER GmbH - Spittal/Austria za područje Bosne i Her-
cegovine.
■■ VIZIJA I MISIJA
Cilj preduzeća MOSER DiS d.o.o. je da zadovolji potrebe tržišta
Bosne i Hercegovine u pogledu kvalitetnih mašina za obradu
metala, te da kupci steknu povjerenje i sigurnost u ime MOS-
ER DiS.
Godina osnivanja: 2008. Broj zaposlenih: 20* Veličina: MALO
Preduzeće MOSER DiS d.o.o. koje posluje kao zastupnik firme Franz MOSER GmbH - Spittal/Austria je poznato po
brizi o svojim kupcima i partnerima kako u Austriji tako i širom Evrope. Preduzeće pruža i usluge savjetovanja pri
odabiru mašina kao i servise koje obezbjeđuje u roku 48 sati.
*Broj zaposlenih u 2017. godini; Izvor: APIF
28. RASPROM d.o.o.Bože Tatarevića bb
+387 51 660 636
rasprom@yahoo.com
25.12 Manufacture of doors and windows of metal
■■ BASIC PRODUCT
Basic product of company Rasprom d.o.o. is PVC and alumini-
um joinery.
Year of establishment: 1990 Number of employees: 3* Size: MICRO
Company Rasprom d.o.o. markets its products to the Austrian market. Of the total revenue that the company gen-
erates, 15% is revenue from exports.
Company Rasprom d.o.o. in the upcoming period, plans to increase exports and capture new foreign markets. The
plan is to buy a CNC machine, improve the technological part and hire new workers.
*Number of employees in 2017; Source: APIF
29. 25.12 Proizvodnja vrata i prozora od metala
■■ OSNOVNI PROIZVOD
Osnovni proizvod preduzeća Rasprom d.o.o. je PVC i aluminijumska stolarija.
Godina osnivanja: 1990. Broj zaposlenih: 3* Veličina: MIKRO
Preduzeće Rasprom d.o.o. svoje proizvode plasira na tržište Austrije. Od ukupnog prihoda koji preduzeće ostvaruje,
15% je prihod ostvaren od izvoza.
Preduzeće Rasprom d.o.o. u narednom periodu planira povećanje izvoza i osvajanje novih inostranih tržišta. U
planu je kupovina CNC mašine, te poboljšanje tehnološkog dijela i zapošljavanje novih radnika.
*Broj zaposlenih u 2017. godini; Izvor: APIF
30. TEŠIĆ d.o.o.Veljka Milankovića 41
+387 51 663 479
dootesic@gmail.com
33.12 Repair of machinery
■■ BASIC PRODUCT
Company Tešić d.o.o. deals with hydrant network testing, de-
velopment of attachments and elaborates and servicing fire
protecting devices.
In addition, the company also provides fire protection ser-
vices.
■■ DEVELOPMENT GOALS
The development goal of the company Tešić d.o.o. is to pro-
vide another license in the field of occupational safety, which
would lead to an increase in the number of employees.
Year of establishment: Number of employees: 7* Size: MICRO
Company Tešić d.o.o. performs its business only on the domestic market.
*Number of employees in 2017; Source: APIF
31. 33.12 Popravka masina
■■ OSNOVNI PROIZVOD
Preduzeće Tešić d.o.o. se bavi ispitivanje hidrantske mreže,iz-
radom priloga i elaborata i servisiranjem PP aparata. Pored
toga, preduzeće pruža i usluge zaštite od požara.
■■ RAZVOJNI CILJEVI
Razvojni cilj preduzeća Tešić d.o.o. je da obezbijedi još jednu
licencu iz oblasti zaštite na radu, što bi dovelo do povećanja
broja zaposlenih.
Godina osnivanja: Broj zaposlenih: 7* Veličina: MIKRO
Preduzeće Tešić d.o.o. svoje poslovanje obavlja samo na domaćem tržištu.
*Broj zaposlenih u 2017. godini; Izvor: APIF
32. Chamber of Commerce and Industry of the
Republic of Srpska
CHAMBER OF COMMERCE AND INDUSTRY
OF BANJA LUKA REGION
Đure Daničića 1/II, 78000 Banja Luka
+ 387 51 215 998
info@bl.komorars.ba
www.bl.komorars.ba
MUNICIPALITY OF PRNJAVOR
Karađorđeva 2, 78430 Prnjavor
+387 51 663 740, local 232
+387 51 660 224
ler@prnjavor.ba
www.opstinaprnjavor.net
www.investprnjavor.com
Banja Luka, November 2018
This info material was made with the
help of the European Union. The con-
tent of this info-material is the sole
responsibility of the Chamber of Com-
merce and Industry of Banja Luka
Region and in no case does it rep-
resent the position of the European
Union.
The preparation of this info material is
supported through the programme for
local self-government and econom-
ic development in BiH, EU ProLocal,
funded by the European Union and the
Government of Germany and imple-
mented by Deutsche Gesellschaft fur
Intrenationale Zusammenarbeit (GIZ)
GmbH.
33. Privredna komora Republike Srpske
PODRUČNA PRIVREDNA KOMORA BANJA LUKA
Đure Daničića 1/II, 78000 Banja Luka
+ 387 51 215 998
info@bl.komorars.ba
www.bl.komorars.ba
OPŠTINA PRNJAVOR
Karađorđeva 2, 78430 Prnjavor
+387 51 663 740, lokal 232
+387 51 660 224
ler@prnjavor.ba
www.opstinaprnjavor.net
www.investprnjavor.com
Banja Luka, novembar 2018.
Ovaj info-materijal je urađen uz po-
moć Evropske unije. Sadržaj ovog in-
fo-materijala je isključiva odgovornost
Područne privredne komore Banja
Luka i ni u kom slučaju ne predstavlja
stanovišta Evropske unije.
Izradaovoginfo-materijalajepodržana
kroz program za lokalnu samoupravu
i ekonomski razvoj u BiH, EU ProLocal,
koje finansiraju Evropska unija i Vlada
Njemačke a implementira Deutsche
Gesellshaft fur Intrenationale Zusam-
menarbeit (GIZ) GmbH.