This document contains a bill of materials for a steel roof structure. It lists over 200 items by name, grade, quantity and dimensions. The items include beams, columns, purlins, bracing, plates and other structural elements. It was issued on 20.01.2015 by Tutja Steel (Pty) Ltd for approval of the listed materials.
KUMARS Forge & Valves Pvt Ltd manufactures and exports steel forgings, machined components, valves, flanges, and fittings based in India. The document provides details on their product range, which includes valves in various sizes and pressure classes made from carbon steel, alloy steel, stainless steel, and other materials. It also lists forgings, machined components, fittings, flanges, forged and machined balls, and instrumentation valves as other product offerings. Dimension charts and material specifications are provided for some of their forged gate and globe valve products.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
This document provides a list of parts for a Massey Ferguson 374/3220 tractor engine. It includes 54 items numbered 1 through 54, with part numbers, quantities, descriptions, and comments. The comments reference other parts and provide additional information about locations and specifications.
Cold stretching has been in use for more than 30 years, but not under ASME code rules until 2008(Code Case 2596). Cold stretching (or cold working) increases the yield limit of a stainless steel material by work hardening it after all forming and welded steps are complete. A vessel can be cold stretched by over pressurizing it 1.5 to 1.6 times design pressure under careful control of the deformation vs pressure as outlined in VIII-1 App 44. The resulting permanent plastic deformation increases the diameter up to 7% and the volume by 14%.
This document provides a design for manufacturing (DFM) report for an injection molding tool to produce 8-cavity impeller parts. It includes details on the part, mold layout, gate locations, cooling channels, draft analysis, product engraving specifications, and signatures from both the customer and moldmaker to confirm agreement on the tool design.
This document provides information on ball valves from the FITOK Group. It includes specifications for the BF and BFH series ball valve models. The BF series is suitable for temperatures from 0°F to 450°F and pressures up to 10,000 psig. The BFH series can handle higher temperatures and pressures, up to 450°F and 10,000 psig. The document provides details on materials of construction, end connection options, flow data and dimensional drawings for both 2-way and 3-way valve configurations. Special options are also described such as low temperature service ratings and oxygen cleaning procedures.
KUMARS Forge & Valves Pvt Ltd manufactures and exports steel forgings, machined components, valves, flanges, and fittings based in India. The document provides details on their product range, which includes valves in various sizes and pressure classes made from carbon steel, alloy steel, stainless steel, and other materials. It also lists forgings, machined components, fittings, flanges, forged and machined balls, and instrumentation valves as other product offerings. Dimension charts and material specifications are provided for some of their forged gate and globe valve products.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
This document provides a list of parts for a Massey Ferguson 374/3220 tractor engine. It includes 54 items numbered 1 through 54, with part numbers, quantities, descriptions, and comments. The comments reference other parts and provide additional information about locations and specifications.
Cold stretching has been in use for more than 30 years, but not under ASME code rules until 2008(Code Case 2596). Cold stretching (or cold working) increases the yield limit of a stainless steel material by work hardening it after all forming and welded steps are complete. A vessel can be cold stretched by over pressurizing it 1.5 to 1.6 times design pressure under careful control of the deformation vs pressure as outlined in VIII-1 App 44. The resulting permanent plastic deformation increases the diameter up to 7% and the volume by 14%.
This document provides a design for manufacturing (DFM) report for an injection molding tool to produce 8-cavity impeller parts. It includes details on the part, mold layout, gate locations, cooling channels, draft analysis, product engraving specifications, and signatures from both the customer and moldmaker to confirm agreement on the tool design.
This document provides information on ball valves from the FITOK Group. It includes specifications for the BF and BFH series ball valve models. The BF series is suitable for temperatures from 0°F to 450°F and pressures up to 10,000 psig. The BFH series can handle higher temperatures and pressures, up to 450°F and 10,000 psig. The document provides details on materials of construction, end connection options, flow data and dimensional drawings for both 2-way and 3-way valve configurations. Special options are also described such as low temperature service ratings and oxygen cleaning procedures.
This document is a Welding Performance Qualification Record (WPQR) that qualifies a welder according to the AWS D1.1 welding code. It details the welding procedure used including the base metals, welding process, filler metal, welding positions qualified, and test results. The welder, Elvis Tom Jones, used SMAW with E7018 electrode to weld ASTM A36 steel plate in the flat and horizontal positions. Visual and guided bend tests of the welds met the acceptance criteria of AWS D1.1, qualifying the welding procedure and welder.
This document outlines specifications for structural steel intended for ship construction. It covers steel plates, shapes, bars, and rivets in various strength grades. The document specifies chemical composition requirements and acceptable manufacturing and heat treatment processes for each grade. It also provides requirements for ordering, chemical analysis, metallurgical structure, and impact testing based on steel grade and product thickness.
This document outlines welding and inspection requirements for piping systems. It specifies requirements for welding qualification, procedures, personnel qualifications, inspection methods, and acceptance criteria. Welding qualifications must meet the standards of ASME Section IX or EN 288 and include non-destructive testing, mechanical testing of cross-weld tensiles, bends, impacts at required temperatures, macrosections and hardness testing where specified for different material types. Inspection and non-destructive testing of completed welds must be performed according to the standards by qualified personnel and meet the acceptance criteria.
This document provides guidelines for essential variables that determine the qualification range of a welding procedure specification in accordance with AWS D1.1 Structural Welding Code - Steel. It summarizes the qualification ranges for position, thickness/diameter, base metal selection, preheat requirements, joint details, heat input, and welding processes. The guidelines specify the testing parameters and qualified ranges for groove welds, fillet welds, plate and pipe configurations.
IRJET- A Case Study: In-Situ Weld Repair of Steel Casting of Grade C12A AST...IRJET Journal
The document describes an in-situ weld repair process for cracks found in a steel casting (Grade C12A ASTM A 217M) used in a steam strainer housing of a power plant. Two large cracks were discovered during an inspection. Rather than replacing the casting, which would take 6 months, it was decided to do an in-situ weld repair. The cracks were removed by grinding and the areas were welded using matching electrodes after establishing preheating, inter-pass heating, and post-weld heat treatment procedures. Non-destructive testing confirmed the weld repair was successful and hardness tests showed the weld met design requirements, allowing the component to be reused.
This document provides information on Merkel Guide Ring Guivex KBK piston guides. It describes the product as a profiled guide ring made from fabric-base laminate with patented design. It offers advantages over conventional guides like higher radial load capacity and improved lubrication distribution. The guide rings can be used in long stroke cylinders, short strokes, and mobile/heavy-duty hydraulics. It provides material, temperature, and surface quality specifications. Dimensions, tolerances, and part numbers for various guide ring sizes are listed.
This document is a welding operator qualification test record for Matthew Flud that qualifies him to manually weld schedule 40 carbon steel pipe with E6010 and E7018 electrodes in the 6G position. The test was conducted on August 19th, 2015 and qualified Mr. Flud to weld pipe with an outer diameter of 1.0"-unlimited inches thick using electrodes within the filler metal specifications of SFA 5.1 and 5.5. The guided bend test samples conformed to the requirements for both the face and root bends.
Massey ferguson mf 3425 vsf tractors parts catalogue manualfjskekmdm
This document contains parts listings and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including the cylinder block, crankshaft, piston, connecting rods, cylinder head, and heater/starter switch. The listings provide part numbers, quantities, descriptions, and other identifying information for each component part.
500 Series Thermoelectric Gas Cooler | Universal AnalyzersNeha Gupta
The Series 500 Sample Coolers are our moderate capacity thermoelectric coolers. They provide a self-regulated 4.0°C dew point gas sample. The 500 Series Coolers condense the water from a wet gas sample with minimal loss of the water soluble gas fraction. To know more visit: https://www.universalanalyzers.com/products/gas-sample-coolers/500-series-cooler
This coupon test report summarizes the results of a welding qualification test. It includes details of the welding parameters, materials used, and test results. Six coupons were welded and tested for maximum load, staincile strength, and fracture location. The welder was qualified based on meeting the minimum tensile strength requirements. Additional remarks were provided on the bead, nick-break, and tensile strength tests.
This document outlines specifications for steel castings suitable for fusion welding and intended for high-temperature service. It specifies three grades of steel (WCA, WCB, WCC) based on mechanical properties and chemical composition. The castings must meet visual inspection standards and can be subjected to additional non-destructive testing. Welding repairs are allowed if procedures and personnel are qualified and the repairs meet the same inspection standards as the original casting. Heat treatment is required and must be suitable for the casting design and steel grade. Dimensional and chemical tolerances are provided for each grade.
DB-Security - Sichere und fraglich sichere Techniken | C.HabermuellerChristian Habermueller
IBM Lotus Domino Notes hat ein Hochsicherheitssystem, das auch im Militärischen seinen Einsatz findet. Lernen Sie, wie das Sicherheitssystem von IBM Lotus Domino Notes aufgebaut ist, mit welchen Techniken Sie Daten vor Fremdzugriff schützen können und welche SCHEINBAR sichere Techniken Ihnen KEINERLEI Zugriffsschutz bieten. Sie benötigen nur Notes-Grundkenntnisse, um die Session mit dem bekannten österreichischen "Schmäh" von Herrn Habermüller besuchen zu können.
O documento descreve diferentes modalidades de termoterapia utilizadas em fisioterapia. Resume:
1. A termoterapia é classificada em hipertermoterapia (aumento da temperatura) e hipotermoterapia (diminuição da temperatura), podendo ser superficial ou profunda.
2. A hipertermoterapia superficial inclui técnicas como banho de parafina, compressas quentes e ultrassom, que aquecem os tecidos de forma localizada e pouco profunda, causando aumento da temperatura, expansão dos te
A storyboard project I have been working on for a bit. All boards were done in Photoshop and compiled together in Adobe Bridge. This does have violence so NSFW and not really for kids.
Este documento apresenta uma introdução sobre a Educação Física Escolar no Brasil ao longo do século XX e discute diferentes abordagens pedagógicas aplicadas à Educação Física, incluindo a formação do professor e a aplicabilidade do conhecimento no ensino.
O documento traça a história do futebol desde suas origens na China Antiga e no Japão Antigo, passando pelos jogos gregos e medievais na Europa, até o desenvolvimento das regras modernas na Inglaterra no século XIX e a popularização do esporte em todo o mundo a partir daí, com a criação da FIFA em 1904.
O documento classifica e descreve diferentes tipos de medicamentos de acordo com sua origem, modo de ação, natureza da enfermidade tratada e estrutura química. Ele discute classes como analgésicos, antitérmicos e anti-inflamatórios, listando exemplos específicos de medicamentos em cada categoria e suas indicações.
Was steckt hinter den Hype "Clean Code"? Die meisten denken in erster Linie an Quellcode, jedoch ist es nur ein Teil des Ganzen. Regeln, Konzepte und Richtlinien gehören mit dazu und entscheiden, ob stabile und wartbare Programme entstehen, die zum Unternehmenserfolg oder auch -ruin beitragen.
Zu dem Thema "Clean Code" haben wir am 12.8.2016 ein Webinar abgehalten und das sind die dazugehörigen Folien.
The document is a report by Techsauce, Thailand's leading tech publication, summarizing Thailand's startup ecosystem and investment trends from 2012-2017. Some key findings include:
- Total funding raised by Thai startups grew from $3.1 million in 2011-2012 to over $86 million in 2016.
- Popular categories of startups receiving investment included e-commerce/marketplaces, fintech, logistics, and payments.
- Major acquisitions of Thai startups have totaled over $108 million, with companies being acquired by firms from Southeast Asia, China, and other regions.
Anatomy of Brain by MRI
In this presentation we will discuss the cross sectional anatomy of brain. Then we will discuss the Most common diseases to be evaluated by brain imaging.
In my opinion this presentation is a road map for beginars.
This document is a Welding Performance Qualification Record (WPQR) that qualifies a welder according to the AWS D1.1 welding code. It details the welding procedure used including the base metals, welding process, filler metal, welding positions qualified, and test results. The welder, Elvis Tom Jones, used SMAW with E7018 electrode to weld ASTM A36 steel plate in the flat and horizontal positions. Visual and guided bend tests of the welds met the acceptance criteria of AWS D1.1, qualifying the welding procedure and welder.
This document outlines specifications for structural steel intended for ship construction. It covers steel plates, shapes, bars, and rivets in various strength grades. The document specifies chemical composition requirements and acceptable manufacturing and heat treatment processes for each grade. It also provides requirements for ordering, chemical analysis, metallurgical structure, and impact testing based on steel grade and product thickness.
This document outlines welding and inspection requirements for piping systems. It specifies requirements for welding qualification, procedures, personnel qualifications, inspection methods, and acceptance criteria. Welding qualifications must meet the standards of ASME Section IX or EN 288 and include non-destructive testing, mechanical testing of cross-weld tensiles, bends, impacts at required temperatures, macrosections and hardness testing where specified for different material types. Inspection and non-destructive testing of completed welds must be performed according to the standards by qualified personnel and meet the acceptance criteria.
This document provides guidelines for essential variables that determine the qualification range of a welding procedure specification in accordance with AWS D1.1 Structural Welding Code - Steel. It summarizes the qualification ranges for position, thickness/diameter, base metal selection, preheat requirements, joint details, heat input, and welding processes. The guidelines specify the testing parameters and qualified ranges for groove welds, fillet welds, plate and pipe configurations.
IRJET- A Case Study: In-Situ Weld Repair of Steel Casting of Grade C12A AST...IRJET Journal
The document describes an in-situ weld repair process for cracks found in a steel casting (Grade C12A ASTM A 217M) used in a steam strainer housing of a power plant. Two large cracks were discovered during an inspection. Rather than replacing the casting, which would take 6 months, it was decided to do an in-situ weld repair. The cracks were removed by grinding and the areas were welded using matching electrodes after establishing preheating, inter-pass heating, and post-weld heat treatment procedures. Non-destructive testing confirmed the weld repair was successful and hardness tests showed the weld met design requirements, allowing the component to be reused.
This document provides information on Merkel Guide Ring Guivex KBK piston guides. It describes the product as a profiled guide ring made from fabric-base laminate with patented design. It offers advantages over conventional guides like higher radial load capacity and improved lubrication distribution. The guide rings can be used in long stroke cylinders, short strokes, and mobile/heavy-duty hydraulics. It provides material, temperature, and surface quality specifications. Dimensions, tolerances, and part numbers for various guide ring sizes are listed.
This document is a welding operator qualification test record for Matthew Flud that qualifies him to manually weld schedule 40 carbon steel pipe with E6010 and E7018 electrodes in the 6G position. The test was conducted on August 19th, 2015 and qualified Mr. Flud to weld pipe with an outer diameter of 1.0"-unlimited inches thick using electrodes within the filler metal specifications of SFA 5.1 and 5.5. The guided bend test samples conformed to the requirements for both the face and root bends.
Massey ferguson mf 3425 vsf tractors parts catalogue manualfjskekmdm
This document contains parts listings and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including the cylinder block, crankshaft, piston, connecting rods, cylinder head, and heater/starter switch. The listings provide part numbers, quantities, descriptions, and other identifying information for each component part.
500 Series Thermoelectric Gas Cooler | Universal AnalyzersNeha Gupta
The Series 500 Sample Coolers are our moderate capacity thermoelectric coolers. They provide a self-regulated 4.0°C dew point gas sample. The 500 Series Coolers condense the water from a wet gas sample with minimal loss of the water soluble gas fraction. To know more visit: https://www.universalanalyzers.com/products/gas-sample-coolers/500-series-cooler
This coupon test report summarizes the results of a welding qualification test. It includes details of the welding parameters, materials used, and test results. Six coupons were welded and tested for maximum load, staincile strength, and fracture location. The welder was qualified based on meeting the minimum tensile strength requirements. Additional remarks were provided on the bead, nick-break, and tensile strength tests.
This document outlines specifications for steel castings suitable for fusion welding and intended for high-temperature service. It specifies three grades of steel (WCA, WCB, WCC) based on mechanical properties and chemical composition. The castings must meet visual inspection standards and can be subjected to additional non-destructive testing. Welding repairs are allowed if procedures and personnel are qualified and the repairs meet the same inspection standards as the original casting. Heat treatment is required and must be suitable for the casting design and steel grade. Dimensional and chemical tolerances are provided for each grade.
DB-Security - Sichere und fraglich sichere Techniken | C.HabermuellerChristian Habermueller
IBM Lotus Domino Notes hat ein Hochsicherheitssystem, das auch im Militärischen seinen Einsatz findet. Lernen Sie, wie das Sicherheitssystem von IBM Lotus Domino Notes aufgebaut ist, mit welchen Techniken Sie Daten vor Fremdzugriff schützen können und welche SCHEINBAR sichere Techniken Ihnen KEINERLEI Zugriffsschutz bieten. Sie benötigen nur Notes-Grundkenntnisse, um die Session mit dem bekannten österreichischen "Schmäh" von Herrn Habermüller besuchen zu können.
O documento descreve diferentes modalidades de termoterapia utilizadas em fisioterapia. Resume:
1. A termoterapia é classificada em hipertermoterapia (aumento da temperatura) e hipotermoterapia (diminuição da temperatura), podendo ser superficial ou profunda.
2. A hipertermoterapia superficial inclui técnicas como banho de parafina, compressas quentes e ultrassom, que aquecem os tecidos de forma localizada e pouco profunda, causando aumento da temperatura, expansão dos te
A storyboard project I have been working on for a bit. All boards were done in Photoshop and compiled together in Adobe Bridge. This does have violence so NSFW and not really for kids.
Este documento apresenta uma introdução sobre a Educação Física Escolar no Brasil ao longo do século XX e discute diferentes abordagens pedagógicas aplicadas à Educação Física, incluindo a formação do professor e a aplicabilidade do conhecimento no ensino.
O documento traça a história do futebol desde suas origens na China Antiga e no Japão Antigo, passando pelos jogos gregos e medievais na Europa, até o desenvolvimento das regras modernas na Inglaterra no século XIX e a popularização do esporte em todo o mundo a partir daí, com a criação da FIFA em 1904.
O documento classifica e descreve diferentes tipos de medicamentos de acordo com sua origem, modo de ação, natureza da enfermidade tratada e estrutura química. Ele discute classes como analgésicos, antitérmicos e anti-inflamatórios, listando exemplos específicos de medicamentos em cada categoria e suas indicações.
Was steckt hinter den Hype "Clean Code"? Die meisten denken in erster Linie an Quellcode, jedoch ist es nur ein Teil des Ganzen. Regeln, Konzepte und Richtlinien gehören mit dazu und entscheiden, ob stabile und wartbare Programme entstehen, die zum Unternehmenserfolg oder auch -ruin beitragen.
Zu dem Thema "Clean Code" haben wir am 12.8.2016 ein Webinar abgehalten und das sind die dazugehörigen Folien.
The document is a report by Techsauce, Thailand's leading tech publication, summarizing Thailand's startup ecosystem and investment trends from 2012-2017. Some key findings include:
- Total funding raised by Thai startups grew from $3.1 million in 2011-2012 to over $86 million in 2016.
- Popular categories of startups receiving investment included e-commerce/marketplaces, fintech, logistics, and payments.
- Major acquisitions of Thai startups have totaled over $108 million, with companies being acquired by firms from Southeast Asia, China, and other regions.
Anatomy of Brain by MRI
In this presentation we will discuss the cross sectional anatomy of brain. Then we will discuss the Most common diseases to be evaluated by brain imaging.
In my opinion this presentation is a road map for beginars.
What we carry with us in our everyday lives and interactions is just as important for our success as our technical skills and achievements.
This is what I carry with me. What do YOU carry?
Slides designed and produced with Haiku Deck for iPad. Set your story free with Haiku Deck at http://www.haikudeck.com/
You can learn more about Jonathon Colman at http://www.jonathoncolman.org/
A Guide to SlideShare Analytics - Excerpts from Hubspot's Step by Step Guide ...SlideShare
This document provides a summary of the analytics available through SlideShare for monitoring the performance of presentations. It outlines the key metrics that can be viewed such as total views, actions, and traffic sources over different time periods. The analytics help users identify topics and presentation styles that resonate best with audiences based on view and engagement numbers. They also allow users to calculate important metrics like view-to-contact conversion rates. Regular review of the analytics insights helps users improve future presentations and marketing strategies.
Mehr Wert schaffen: Social Media in der B2B-KommunikationThomas Pleil
Zusammenfassung der Studie "Mehr Wert schaffen. Social Media in der B2B-Kommunikation", herausgegeben von der profilwerkstatt Darmstadt und dem Institut für Kommunikation und Medien der Hochschule Darmstadt.
Die Golden Rules sind ein 1x1, ein ABC, ein Handbuch, ein Insider-Werk mit bewährten, frischen und konkreten Methoden, Tools, Techniken und Tipps für Motivation, Konzentration, Zeitmanagement, Ordnung und Selbstcoaching.
Golden Rules sind ein motivierendes Zeitmanagementbuch - bzw. ein zeitsparendes Motivationsbuch.
Für alle, die noch viel im Leben vorhaben!
Infos: http://www.studienstrategie.de/buecher/golden-rules/
This document contains drawings and a bill of materials for a steel structure. It includes 13 sheets of drawings detailing structural steel beams, stringers, plates and stairs labeled BA1 through BA13, CA1 and PL8. The drawings were prepared using Tekla Structures and contain notes specifying the grade of steel, weld sizes and fabrication requirements. A table lists each steel component along with its profile, grade, quantity and assembly name.
The document discusses the construction of a steel superstructure for a rail-cum-road bridge across the River Ganga in Bihar, India. Key details include a bridge length of 3.690 km using welded steel truss construction. Gammon Infrastructure Projects Ltd has been contracted to fabricate and erect 12 spans of 125m each. The work involves fabricating over 24,000 tons of structural steel at site workshops and erecting the spans by cantilever erection using customized cranes. Challenges include avoiding distortion during fabrication and controlling cantilever erection stresses.
This document provides drawings for a proposed warehouse steel structure project located in Colombia. The drawings include plans for the column layout, mezzanine floor, roof sheeting, elevations, and sections. Notes provide specifications for materials, welding, bolts, and tolerances. Dimensions and views are shown at scales of 1:100 and 1:150. The general contractor for the project is P.K.
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - WATERMANSSunit Dhingra
This document provides details of the structural steelwork and construction for the lower ground floor of a building. It includes a legend explaining the annotations on the drawing. The drawing shows the layout of steel beams, columns, bracing elements and other structural components. A schedule lists the sizes of various plate beams used in the construction. General notes indicate this drawing covers the steel construction up to the ground floor only and provide information on beam sizes and levels.
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - CAPITASunit Dhingra
This document is a pile layout drawing showing the foundation plan for a construction project. It includes details like pile locations, pile caps, ground beams, wall locations, and load information. The piles range in diameter from 600mm to 1200mm. Reinforced concrete walls are 200mm thick generally. The drawing provides guidance for the foundation design and establishes the load transfer structure below ground level.
The document contains a parts list and drawings for a punch die assembly. It includes 16 items in the parts list with details like part numbers, descriptions, materials. The drawings show details of the individual parts and their dimensions, including the upper and lower die, die plate, die punch, guide posts and other components. Tolerances and notes are provided. The assembly is made of materials like steel, cast steel and aluminum.
This document provides information on CombiBox electromagnetic clutch-brake modules. It includes:
- Program schedules and technical data for CombiBox types 10, 09, and 06 which differ in clutch and brake configurations.
- Dimensional drawings and specifications for CombiBox units with various shaft in/shaft out, bore in/bore out, and bore in/shaft out configurations.
- Ordering information examples and details on flange dimensions, torque ratings, and voltage requirements.
Customization and modular options are available to adapt CombiBoxes to specific construction and electrical needs.
JCB 3CX-2 Sitemastr BACKOHE LOADER Parts Catalogue Manual (Serial Number 0029...fujsked9dik
This document provides parts information for the cooling system of a backhoe loader. It includes 18 items related to the radiator assembly, hoses, fittings, and brackets. Another section lists 21 items for the radiator hoses and fittings for both naturally aspirated and turbocharged engines. The final section provides information on the thermostat housing, inlet, and outlet with 17 associated parts.
JCB 3CX-2 Sitemastr BACKOHE LOADER Parts Catalogue Manual (Serial Number 0029...jdjskdkdmmd
This document provides parts information for the cooling system of a backhoe loader. It includes 18 items related to the radiator assembly, hoses, fittings, and brackets. Another section lists 21 items for the radiator hoses and fittings for both naturally aspirated and turbocharged engines. The final section provides information on the thermostat housing, inlet, and outlet with 17 associated parts.
JCB JS360 TRACKED EXCAVATOR Parts Catalogue Manual (Serial Number 01807000-01...kdmdmsmmdm
This document provides part numbers and descriptions for components of an excavator undercarriage assembly and related systems, including:
1. An undercarriage assembly with components listed on other pages.
2. Assemblies for rollers, covers, recoil unit, center joint, and rollers listed on other pages.
3. A traction motor line assembly and traction equipment assembly.
JCB JS360 TRACKED EXCAVATOR Parts Catalogue Manual (Serial Number 01909300-01...kdmdmsmmdm
This document provides part numbers and descriptions for components of an excavator undercarriage assembly and related systems, including:
1. An undercarriage assembly with components listed on other pages.
2. Assemblies for rollers, covers, recoil unit, center joint, and rollers listed on other pages.
3. A traction motor line assembly and traction equipment assembly.
couplings | sight glass | structure and supportsGoel Scientific
Adaptor backing flanges are used to couple glass equipment to non-glass equipment with different bolt configurations. They are made of cast iron and supplied with inserts. PTFE O-rings with locking collars are used as gaskets in glass fittings to correctly locate the glass end. Bellows are used to provide safe branching of pipelines from main glass equipment and accommodate odd degrees and length variations. They are supplied with bellow flanges and bolts to avoid excessive compression or contraction. Glass equipment should be supported rigidly and in compression to prevent stresses. A tubular structure of galvanized steel tubes with fittings provides flexibility and strength for support.
Sample for small_shed_of_steel_structurAymanBadr16
This document contains details of anchor bolt layouts and schedules for a utility building project. It includes dimensions and quantities of different sized anchor bolts, diagrams showing the layout of anchor bolts around concrete columns, and schedules listing anchor bolt component details. Dimensioned drawings provide specifications for anchor bolt installation around columns.
This document provides information on Atlas cable cleats for supporting trefoil and single cable applications. It describes the cleats' unique patented design which provides mechanical support and short circuit withstand capability. The cleats are made of galvanized or stainless steel and include integral pads to protect and cushion cables during short circuit conditions. Tables provide dimensions and weights for various cleat models to accommodate different cable diameters. Test results show the cleats meet the requirements of European standard BS EN 50368:2003 for properties like axial movement, flame resistance, electro-mechanical force resistance, and impact resistance.
The document provides specifications for various models of DeltaTM anchors, CQRTM anchors, and Claw anchors. It includes information on the materials, dimensions, weights, recommended chain sizes, and specifications for each anchor model. The anchors are designed for boats of different lengths, from 6 meters to over 27 meters.
This document provides product data for a vertical split coupled pump including:
- Model number, flow rate of 180 GPM, head of 60 feet, and motor horsepower of 5.00 HP
- Materials of construction including cast iron, bronze, stainless steel, and ductile iron
- Dimensions, weights, performance curves showing flow rate vs head, and NPSH required
- Motor specifications of 380VAC, 3 phase, 60Hz