This document provides an overview of AutoCAD software. It discusses the history and latest version of AutoCAD, the AutoCAD interface, basic 2D commands like lines and hatching, creating 3D models using extrude, and benefits of AutoCAD like quickly creating accurate designs that can be easily modified and transferred. Project work and commands for trimming and creating viewports are also mentioned.
3. Introduction
Latest Version
AutoCAD Screen
Way to provide command.
Co-ordinate system.
Some 2D command.
Isometric view.
Project work
Benefits of AutoCAD.
6-Mar-18 3
4. The Word AutoCAD is made up of two words
“Auto(logo of company)”and CAD “(computer aided
design)”.
AutoCAD is 2D and 3D modeling software.
It is developed by Autodesk company.
Autodesk is an U.S.A based company.
It is widely used in industry for 2D drawing and 3D
modeling.
In another way we can say that AutoCAD is a designing
course , which is performed by the help of computer.
6-Mar-18 4
5. AutoCAD software was firstly launched by
Autodesk company in Dec. 1982.
It comes in India in 1988.
The first version of AutoCAD was R1 after that
R2,R3,R4…………… and so on.
In 2000,Autodesk launched a version of AutoCAD
2000 after that 2001,2002…… so on.
This time, we have the latest version of AutoCAD
is 2017,which was launched on 21th march 2016.
Latest version is easy to use and over come the
difficulties of old version
.
6-Mar-18 5
8. Every thing that we draw in AutoCAD is exact.
All object drawn on screen is based on simple X-Y co-ordinate
system.
In AutoCAD it is known as Work co-ordinate system (WCS).
We are drawing a line, so we have two points A(-10,-4) and B(9,6).
As shown in figure.
6-Mar-18 8
11. Hatching is used to add shaded patterns to objects and shapes
within an Autocad drawing. Hatch patterns can be used to
indicate a material to be used, such as a concrete hatch.
You will pick:
Pattern
Scale
Angle
points
6-Mar-18 11
14. Line:
Select the coordinates (0,0) as the first point of the rectangle
Take direction toward the x axis and mark length as 100
Now from the adjacent segment take the direction toward the y axis and type the length of line as 150.
Join:
use the join command to join the all line segments and make the a single object
To use join command type join on command line and select the line to be joined.
Extrude:
Extrude command is used to extend the object in the z axis and also also help a to convert the 2D object 3D
object
Type the extrude command on command line
Select the object
Take the cursor toward the z axis and type its length (as 200) in the command line
6-Mar-18 14
15. Trim
Trim command is used to trim or erase the extra portion of line segment.
Type trim command on command line
Select the portion you wish to trim
Viewports:-
Viewports are used to convert the AutoCAD workspace into 4 equal workspace which shows the different
views of the same object
Type view port on the command line
A box will appear which have the options to change the view ports (front ,right, Isometric, left)
6-Mar-18 15
23. Quickly create designs.
Improved quality over hand drafting.
Easily modify.
More Accuracy.
Easy to transfer.
Long time save.
6-Mar-18 23