Presentation dmwcfu420
•Download as PPTX, PDF•
0 likes•138 views
The presentation covers domestic hybrid vehicle technologies including batteries, regenerative braking, permanent magnet electric motors, and the Atkinson cycle engine. It discusses nickel metal hydride and lithium-ion batteries, how regenerative braking recharges the battery by reversing current flow through the motor during deceleration, and how permanent magnet motors and the Atkinson cycle with its variable compression and intake valve timing improve fuel efficiency.
Report
Share
Report
Share
Recommended
Pansonic Battery Storage Systems
Panasonic Corp is the biggest supplier of lithium-ion batteries used in electric cars - Panasonic will supply twp billion lithium-ion battery cells to Tesla Motors in the next four years per recently inked new agreement; through 2017
Who Needs An EV1
This document introduces electric vehicle (EV) technology and discusses building an EV versus buying one. It covers the goals of presenting EV part sources and costs, and allowing the reader to determine if EVs are a good transportation option. If so, more information is provided to continue pursuing EVs. The document discusses why EVs are a good option and the components of an EV like batteries, motors, controllers and charging systems. It also addresses costs, suppliers, and future discussions around EVs.
Vaibhav gautam (electric vehicle file )
1) The document discusses the key parts of an electric vehicle, including electric motors, motor controllers, battery packs, transmissions, charging points, brakes, DC-DC converters, and joysticks for controlling modes.
2) It explains that electric cars use electric motors powered by batteries rather than gasoline engines, and that they can use both AC and DC motors.
3) The document provides details on other components like single-speed transmissions, regenerative braking systems, lithium-ion batteries, charging stations, and DC-DC converters that convert voltages to power accessories.
New car battery developed by lg chem
LG Chem has developed a new lithium-ion battery pack for electric vehicles that can provide a cruising range of up to 300 miles, surpassing Tesla's current battery technology. The battery pack has a capacity between 80-120 kWh, higher than Tesla's 85 kWh battery. LG Chem has supplied battery technology to many electric vehicles from various automakers and their new battery is expected to be used in the 2017 Chevy Bolt, Audi Q6 E-Tron, and Porsche models.
AlternativeFuelVehicles
The document discusses alternative fuel vehicles (AFVs) as a way to decrease dependence on fossil fuels for transportation. It describes electric vehicles (EVs) which are powered solely by lithium-ion batteries, as well as solar-battery vehicles which harness energy from the sun but currently cannot power a standard car. The document also mentions compressed air vehicles (CAVs) which use compressed air instead of explosions to power pistons, but have limitations such as long recharging times and issues in cold environments. Overall, the document presents EVs as the most feasible replacement for combustion engine vehicles currently and discusses various AFV technologies and their challenges.
E vechle presetation-1st
This document discusses electric motors as prime movers for automotive applications. It summarizes the energy losses during urban and highway driving for internal combustion and electric vehicles. It then examines the characteristics of variable-speed electric motors, including their speed-torque profiles and tractive effort curves. Finally, it reviews several battery technologies and their suitability for electric vehicles.
Automobile technology future
Electric vehicles are becoming more common as battery technology improves. Self-driving cars may also significantly impact the automobile industry. Additional emerging technologies discussed in the document include augmented reality windshields, which could display information and interfaces directly on the windshield, and energy-storing body panels that could supplement vehicle batteries and enable energy recapture. Vehicle-to-vehicle communication technology may also allow cars to share information to avoid accidents. As batteries and automation advance, electric and self-driving vehicles have the potential to transform personal transportation.
Electric vehicle batteries
Electric vehicle batteries have evolved from early lead-acid batteries to current lithium-ion batteries that provide over 300 km of range. Different battery types include lead-acid, nickel-metal hydride, sodium-nickel chloride, and lithium-ion. Charging can be conducted through conductive coupling to charge ports or inductively. Future battery innovations aim to further increase range and reduce charging times through technologies like carbon nanotubes and battery swapping systems.
Recommended
Pansonic Battery Storage Systems
Panasonic Corp is the biggest supplier of lithium-ion batteries used in electric cars - Panasonic will supply twp billion lithium-ion battery cells to Tesla Motors in the next four years per recently inked new agreement; through 2017
Who Needs An EV1
This document introduces electric vehicle (EV) technology and discusses building an EV versus buying one. It covers the goals of presenting EV part sources and costs, and allowing the reader to determine if EVs are a good transportation option. If so, more information is provided to continue pursuing EVs. The document discusses why EVs are a good option and the components of an EV like batteries, motors, controllers and charging systems. It also addresses costs, suppliers, and future discussions around EVs.
Vaibhav gautam (electric vehicle file )
1) The document discusses the key parts of an electric vehicle, including electric motors, motor controllers, battery packs, transmissions, charging points, brakes, DC-DC converters, and joysticks for controlling modes.
2) It explains that electric cars use electric motors powered by batteries rather than gasoline engines, and that they can use both AC and DC motors.
3) The document provides details on other components like single-speed transmissions, regenerative braking systems, lithium-ion batteries, charging stations, and DC-DC converters that convert voltages to power accessories.
New car battery developed by lg chem
LG Chem has developed a new lithium-ion battery pack for electric vehicles that can provide a cruising range of up to 300 miles, surpassing Tesla's current battery technology. The battery pack has a capacity between 80-120 kWh, higher than Tesla's 85 kWh battery. LG Chem has supplied battery technology to many electric vehicles from various automakers and their new battery is expected to be used in the 2017 Chevy Bolt, Audi Q6 E-Tron, and Porsche models.
AlternativeFuelVehicles
The document discusses alternative fuel vehicles (AFVs) as a way to decrease dependence on fossil fuels for transportation. It describes electric vehicles (EVs) which are powered solely by lithium-ion batteries, as well as solar-battery vehicles which harness energy from the sun but currently cannot power a standard car. The document also mentions compressed air vehicles (CAVs) which use compressed air instead of explosions to power pistons, but have limitations such as long recharging times and issues in cold environments. Overall, the document presents EVs as the most feasible replacement for combustion engine vehicles currently and discusses various AFV technologies and their challenges.
E vechle presetation-1st
This document discusses electric motors as prime movers for automotive applications. It summarizes the energy losses during urban and highway driving for internal combustion and electric vehicles. It then examines the characteristics of variable-speed electric motors, including their speed-torque profiles and tractive effort curves. Finally, it reviews several battery technologies and their suitability for electric vehicles.
Automobile technology future
Electric vehicles are becoming more common as battery technology improves. Self-driving cars may also significantly impact the automobile industry. Additional emerging technologies discussed in the document include augmented reality windshields, which could display information and interfaces directly on the windshield, and energy-storing body panels that could supplement vehicle batteries and enable energy recapture. Vehicle-to-vehicle communication technology may also allow cars to share information to avoid accidents. As batteries and automation advance, electric and self-driving vehicles have the potential to transform personal transportation.
Electric vehicle batteries
Electric vehicle batteries have evolved from early lead-acid batteries to current lithium-ion batteries that provide over 300 km of range. Different battery types include lead-acid, nickel-metal hydride, sodium-nickel chloride, and lithium-ion. Charging can be conducted through conductive coupling to charge ports or inductively. Future battery innovations aim to further increase range and reduce charging times through technologies like carbon nanotubes and battery swapping systems.
Electric vehicle
The document discusses the benefits of electric vehicles over gas/diesel vehicles, including that EVs can utilize domestically generated and renewable solar and wind energy, have lower costs and are more reliable with no oil spill problems. It notes some challenges of EVs like needing to charge batteries and having a limited range between charges. It also defines different types of electric vehicles like battery electric vehicles, plug-in hybrid electric vehicles, and hybrid electric vehicles which use batteries and internal combustion engines.
Presentación coches eléctricos.eng
This document discusses different types of electric vehicles, including cars, motorbikes, aircraft, buses, and ships. It notes the advantages of electric vehicles as producing no pollutant emissions and having fewer mechanical parts requiring maintenance compared to gas vehicles. However, it also lists disadvantages such as limited driving range before recharging, long recharging times, high upfront costs, and low power output. Specific electric car models from Renault and Nissan are mentioned. The document also discusses an electric solar-powered ship in Guadalest, Spain that can run indefinitely using solar energy and for over 150 hours without sunlight.
Electric Hybrid Vehicles
Hybrid vehicles combine two or more power sources, such as a gasoline engine and electric motor, to improve fuel efficiency. There are several types of hybrid drivetrains including series, parallel, and series-parallel hybrids. Hybrid vehicles can be full hybrids, plug-in hybrids, or mild hybrids depending on their battery and electric motor capabilities. While more expensive initially, hybrids help address issues with electric vehicles like range anxiety and high battery costs.
Top 75 Electric Vehicle Research Project Ideas
Here is a list of top 75 electric vehicle-related project ideas. These project ideas would help PhD, MTech, BTech, MS and other engineering students.
Link to the book: https://www.amazon.com/Electric-Vehicle-Research-Projects-Engineering-ebook/dp/B07J3SHH3K
SSSC Green Technologies
Shelby SuperCars, a Washington State company holding the current record for the Fastest Production Car in the World, is entering a capital investment phase. This ppt explains their history and current investment phase.
Hybrid vehicle
This presentation discusses hybrid vehicles. It defines a hybrid vehicle as being propelled by two power sources, such as diesel-electric or gasoline-electric. The presentation outlines the basic components of a hybrid which include an internal combustion engine, electric motor, generator, battery and transmission. It describes the three main types of hybrid transmissions: series, parallel and series-parallel. Advantages of hybrids are discussed such as better fuel efficiency and lower emissions, while disadvantages include higher initial costs and potential for increased repair expenses.
Ev presentation
This document provides an introduction to electric vehicles (EVs). It defines an EV as a car that uses electric motors for propulsion powered by electricity rather than petrol. There are three main types of EVs: hybrid electric vehicles, plug-in hybrids, and full electric vehicles. EVs work by using electricity stored in a battery to power the electric motor and move the car, rather than using an internal combustion engine fueled by petrol. While EVs have benefits like lower emissions and fuel costs, their disadvantages currently include higher purchase prices and limited range between charges.
OLEV with smart phone control
This document presents a new design concept called the On-Line Electric Vehicle (OLEV) that can be powered and charged wirelessly while driving. OLEV uses underground electric coils to power the vehicle without mechanical contact stations, reducing infrastructure costs compared to other electric vehicles. It then describes the differences between OLEV and traditional electric trams, noting that OLEV does not require overhead power lines or pantographs. The document provides block diagrams of the OLEV system, including its power supply, transmission coils, pickup coils, and Bluetooth module for remote control. It concludes by outlining potential applications and advantages of OLEV over trams.
Electric car
The document discusses the history and components of an electric car. It describes how an electric car uses an electric motor powered by rechargeable batteries instead of a gasoline engine. It then provides details on the motor, batteries, controller, and charging system of the electric car. The electric car can travel about 50 miles on a single charge and goes from 0 to 60 mph in around 15 seconds.
Electric car 1
This ppt is all about Automotive. the part of electric car electric vehicle (EV), also called electrics is a vehicle that uses one or more electric motors or traction motors for propulsion.
Best ppt on Hybrid cars
This document provides an overview of hybrid vehicle technology, including definitions, classifications of hybrid systems, and the history and future of hybrid vehicles. Some key points:
- Hybrid vehicles use both an internal combustion engine and electric motor to propel the vehicle. Most hybrids use a high-voltage battery pack and electric motor/generator to assist a gasoline engine.
- There are three main hybrid classifications: series, parallel, and series-parallel. Series systems use just the electric motor, parallel systems can use engine or motor alone or together, and series-parallel can operate in electric or combined modes.
- Hybrid technology has improved battery designs over time from nickel-metal hydride to prismatic batteries for better performance
SOLAR ROAD WAYS
Solar Roadways are complex structures of uniquely constructed solar panels.
They were designed in the shape of a hexagon to accommodate curves and hills. (Initial design was 12ft x 12ft panel)
Cable Corridor - sector that contains cables and stormwater capture system
3 Layers
solar road ways presented by Raghunathand Bharath
This document discusses solar roadways, which are roads that generate electricity through solar panels embedded below a glass surface. It provides details on how solar roadways work, including that they are made up of three layers: a road surface/glass layer, electronics layer, and base plate layer. The electronics layer contains photovoltaic cells that convert solar energy to electricity and can heat the road surface. Solar roadways provide benefits like renewable energy generation, road illumination from LEDs, and potential electric vehicle charging. The document describes prototypes created by the company Solar Roadways and a solar parking lot they constructed. It argues solar roadways could provide power at a similar cost to current road/power systems, while reducing pollution and global warming.
The Best Motor for Hybrid Electric Vehicle Powertrains
This webinar examined the differences between permanent magnet AC (PMAC) motors and induction motors for use in hybrid electric vehicle powertrains and their impact on energy consumption and battery costs. It discussed the physical, performance, and efficiency characteristics of each motor type. It also analyzed the energy losses of both motors over various usage cycles representative of city, rural, and highway driving. The presentation concluded that PMAC motors are more efficient, especially over dynamic usage cycles, and can reduce energy storage costs by $350 to $10,500 per vehicle.
EV Development Forum(Chongqing 2009)
The document summarizes an EV development forum held in Chongqing, China in 2009. Several organizations presented on their EV plans and research, including ChanA announcing plans to develop battery EVs by 2012, the US DOE discussing battery challenges for PHEVs, Nissan outlining their Leaf EV plans, and various companies discussing EV components and standards. The key topics were EV and battery technology challenges, plans for commercialization, and need for government support on charging infrastructure.
Hybrid cars
Hybrid cars combine a gasoline engine with an electric motor to improve fuel efficiency. They work by using the electric motor for acceleration and braking and the gasoline engine for maintaining speed. This allows for regenerative braking that captures energy during braking to recharge the batteries. Hybrids get better gas mileage than conventional cars, with emissions reduced by 30-50%. Current hybrid models include the Toyota Prius, Honda Accord Hybrid, and Ford Escape Hybrid.
Solar car by chinna
The first solar car was invented in 1955 by William G. Cobb and was called the "Sun Mobile". It had 12 photovoltaic cells and was about 12 inches in size. A solar car is an electric vehicle that is powered by solar energy obtained from solar panels on its roof. It consists of a solar array, power trackers, an electric motor, and a speed controller. The solar array provides power and the power trackers regulate the electricity delivered to the motor controller or batteries.
Cars of the future
The document discusses various alternative fuel cars of the future, including hydrogen fuel cell cars, biodiesel cars, compressed air cars, pure electric cars. Hydrogen fuel cell cars produce no CO2 emissions but require more hydrogen fueling stations. Biodiesel can be made from various resources but may have slightly higher emissions. Compressed air cars could use air conditioning waste but have limited range. Pure electric cars like Teslas have no emissions but require more charging stations; the government could provide incentives to encourage their development and infrastructure.
Solar roadways technology in the world
The Solar Roadway is a series of structurally-engineered solar panels that are driven upon. The idea is to replace all current petroleum-based asphalt roads, parking lots, and driveways with Solar Road Panels that collect energy to be used by our homes and businesses. The renewable energy generated by solar road panels will replace the current need for fossil fuel which is used for generation of electricity as also oil used for driving the vehicles which in turn reduces the greenhouse gases nearly to half. The implementation of Solar Roadways Technology will create the clean energy boom, spurring private investment on a massive scale, with relatively little extra cost. An intelligent highway infrastructure and a self-healing decentralized power grid that will eliminate our need for fossil fuels. Solar Roadways will also features wildlife preservation, the elimination of impervious surfaces, law enforcement, DUI detection, counter-terrorism, etc. It provides a decentralized, secure, intelligent, self-healing power grid which pays for itself. Today more than ever we see and feel the consequences of the climate change. From
melting ice caps, to the rising sea levels, weather changes and temperature rises, there are
more and more natural disasters that we learn about from the news. People have come up with many different kinds of methods and solutions in order to fight these changes but not many of them are as effective as needed. Thus we need to step on more complex approaches and more general and interlinked solutions for solving the pressing problems.There is, however, a technology that can help us to normalize our climate, but also help in our daily lives. We offer Smart Solar Roadways as one possible solution that can drastically change our way of living for better. Smart Solar roads combine different solutions in one – it can help us to improve energy production from solar panels, to collect and distribute rain water, to provide a digital platform for Smart city, to facilitate emerging electric cars and driver-less cars and much more! We believe that this approach can offer many additional benefits to citizens, to the environment and will contribute for sustainable development as a whole. Some may call it even the next “Industrial revolution”, we like to think of it like a better tomorrow. So it’s time to upgrade our infrastructure (especially roads & power grids) with the 21st century technology i.e.
“Solar Roadways”.
Privacy Balance Sought - Letter to Editor - Applied Clinical Trials 2001
The document discusses how the terrorist attacks on September 11th may impact privacy policies in healthcare. It notes that privacy has been heavily debated with the passage of HIPAA but the full impact on clinical trials is still being assessed. It argues that Americans are willing to concede some privacy for increased security and a similar concession could happen in healthcare that enables faster access to medical advances. However, privacy restrictions currently hinder this by limiting access to databases to match patients to studies and may deny patients treatment opportunities. Striking a balance between privacy and advancing medical treatments, like the balance between privacy and security, will require some concessions to privacy to achieve goals.
SOA Database Connectivity Issues Showing DatabaseException Internal Exception
Imaging activity is causing performance issues in the Production environment. Errors are occurring related to database connections timing out or being disabled. The root causes include slow databases, large payloads, and network interruptions. Increasing the connection timeout values and capacities of the connection pools for databases like SOADataSource can help resolve the issues.
Planning the blog
This blog is being planned as a resource for 5th grade students who are beginners and have difficulties learning. It will include PowerPoint presentations, crossword puzzles, videos with introductions, vocabulary games, and audio to help students compare physical activities and describe their families. The presentation introduces the blogger's plan to create an educational blog for 5th graders.
More Related Content
What's hot
Electric vehicle
The document discusses the benefits of electric vehicles over gas/diesel vehicles, including that EVs can utilize domestically generated and renewable solar and wind energy, have lower costs and are more reliable with no oil spill problems. It notes some challenges of EVs like needing to charge batteries and having a limited range between charges. It also defines different types of electric vehicles like battery electric vehicles, plug-in hybrid electric vehicles, and hybrid electric vehicles which use batteries and internal combustion engines.
Presentación coches eléctricos.eng
This document discusses different types of electric vehicles, including cars, motorbikes, aircraft, buses, and ships. It notes the advantages of electric vehicles as producing no pollutant emissions and having fewer mechanical parts requiring maintenance compared to gas vehicles. However, it also lists disadvantages such as limited driving range before recharging, long recharging times, high upfront costs, and low power output. Specific electric car models from Renault and Nissan are mentioned. The document also discusses an electric solar-powered ship in Guadalest, Spain that can run indefinitely using solar energy and for over 150 hours without sunlight.
Electric Hybrid Vehicles
Hybrid vehicles combine two or more power sources, such as a gasoline engine and electric motor, to improve fuel efficiency. There are several types of hybrid drivetrains including series, parallel, and series-parallel hybrids. Hybrid vehicles can be full hybrids, plug-in hybrids, or mild hybrids depending on their battery and electric motor capabilities. While more expensive initially, hybrids help address issues with electric vehicles like range anxiety and high battery costs.
Top 75 Electric Vehicle Research Project Ideas
Here is a list of top 75 electric vehicle-related project ideas. These project ideas would help PhD, MTech, BTech, MS and other engineering students.
Link to the book: https://www.amazon.com/Electric-Vehicle-Research-Projects-Engineering-ebook/dp/B07J3SHH3K
SSSC Green Technologies
Shelby SuperCars, a Washington State company holding the current record for the Fastest Production Car in the World, is entering a capital investment phase. This ppt explains their history and current investment phase.
Hybrid vehicle
This presentation discusses hybrid vehicles. It defines a hybrid vehicle as being propelled by two power sources, such as diesel-electric or gasoline-electric. The presentation outlines the basic components of a hybrid which include an internal combustion engine, electric motor, generator, battery and transmission. It describes the three main types of hybrid transmissions: series, parallel and series-parallel. Advantages of hybrids are discussed such as better fuel efficiency and lower emissions, while disadvantages include higher initial costs and potential for increased repair expenses.
Ev presentation
This document provides an introduction to electric vehicles (EVs). It defines an EV as a car that uses electric motors for propulsion powered by electricity rather than petrol. There are three main types of EVs: hybrid electric vehicles, plug-in hybrids, and full electric vehicles. EVs work by using electricity stored in a battery to power the electric motor and move the car, rather than using an internal combustion engine fueled by petrol. While EVs have benefits like lower emissions and fuel costs, their disadvantages currently include higher purchase prices and limited range between charges.
OLEV with smart phone control
This document presents a new design concept called the On-Line Electric Vehicle (OLEV) that can be powered and charged wirelessly while driving. OLEV uses underground electric coils to power the vehicle without mechanical contact stations, reducing infrastructure costs compared to other electric vehicles. It then describes the differences between OLEV and traditional electric trams, noting that OLEV does not require overhead power lines or pantographs. The document provides block diagrams of the OLEV system, including its power supply, transmission coils, pickup coils, and Bluetooth module for remote control. It concludes by outlining potential applications and advantages of OLEV over trams.
Electric car
The document discusses the history and components of an electric car. It describes how an electric car uses an electric motor powered by rechargeable batteries instead of a gasoline engine. It then provides details on the motor, batteries, controller, and charging system of the electric car. The electric car can travel about 50 miles on a single charge and goes from 0 to 60 mph in around 15 seconds.
Electric car 1
This ppt is all about Automotive. the part of electric car electric vehicle (EV), also called electrics is a vehicle that uses one or more electric motors or traction motors for propulsion.
Best ppt on Hybrid cars
This document provides an overview of hybrid vehicle technology, including definitions, classifications of hybrid systems, and the history and future of hybrid vehicles. Some key points:
- Hybrid vehicles use both an internal combustion engine and electric motor to propel the vehicle. Most hybrids use a high-voltage battery pack and electric motor/generator to assist a gasoline engine.
- There are three main hybrid classifications: series, parallel, and series-parallel. Series systems use just the electric motor, parallel systems can use engine or motor alone or together, and series-parallel can operate in electric or combined modes.
- Hybrid technology has improved battery designs over time from nickel-metal hydride to prismatic batteries for better performance
SOLAR ROAD WAYS
Solar Roadways are complex structures of uniquely constructed solar panels.
They were designed in the shape of a hexagon to accommodate curves and hills. (Initial design was 12ft x 12ft panel)
Cable Corridor - sector that contains cables and stormwater capture system
3 Layers
solar road ways presented by Raghunathand Bharath
This document discusses solar roadways, which are roads that generate electricity through solar panels embedded below a glass surface. It provides details on how solar roadways work, including that they are made up of three layers: a road surface/glass layer, electronics layer, and base plate layer. The electronics layer contains photovoltaic cells that convert solar energy to electricity and can heat the road surface. Solar roadways provide benefits like renewable energy generation, road illumination from LEDs, and potential electric vehicle charging. The document describes prototypes created by the company Solar Roadways and a solar parking lot they constructed. It argues solar roadways could provide power at a similar cost to current road/power systems, while reducing pollution and global warming.
The Best Motor for Hybrid Electric Vehicle Powertrains
This webinar examined the differences between permanent magnet AC (PMAC) motors and induction motors for use in hybrid electric vehicle powertrains and their impact on energy consumption and battery costs. It discussed the physical, performance, and efficiency characteristics of each motor type. It also analyzed the energy losses of both motors over various usage cycles representative of city, rural, and highway driving. The presentation concluded that PMAC motors are more efficient, especially over dynamic usage cycles, and can reduce energy storage costs by $350 to $10,500 per vehicle.
EV Development Forum(Chongqing 2009)
The document summarizes an EV development forum held in Chongqing, China in 2009. Several organizations presented on their EV plans and research, including ChanA announcing plans to develop battery EVs by 2012, the US DOE discussing battery challenges for PHEVs, Nissan outlining their Leaf EV plans, and various companies discussing EV components and standards. The key topics were EV and battery technology challenges, plans for commercialization, and need for government support on charging infrastructure.
Hybrid cars
Hybrid cars combine a gasoline engine with an electric motor to improve fuel efficiency. They work by using the electric motor for acceleration and braking and the gasoline engine for maintaining speed. This allows for regenerative braking that captures energy during braking to recharge the batteries. Hybrids get better gas mileage than conventional cars, with emissions reduced by 30-50%. Current hybrid models include the Toyota Prius, Honda Accord Hybrid, and Ford Escape Hybrid.
Solar car by chinna
The first solar car was invented in 1955 by William G. Cobb and was called the "Sun Mobile". It had 12 photovoltaic cells and was about 12 inches in size. A solar car is an electric vehicle that is powered by solar energy obtained from solar panels on its roof. It consists of a solar array, power trackers, an electric motor, and a speed controller. The solar array provides power and the power trackers regulate the electricity delivered to the motor controller or batteries.
Cars of the future
The document discusses various alternative fuel cars of the future, including hydrogen fuel cell cars, biodiesel cars, compressed air cars, pure electric cars. Hydrogen fuel cell cars produce no CO2 emissions but require more hydrogen fueling stations. Biodiesel can be made from various resources but may have slightly higher emissions. Compressed air cars could use air conditioning waste but have limited range. Pure electric cars like Teslas have no emissions but require more charging stations; the government could provide incentives to encourage their development and infrastructure.
Solar roadways technology in the world
The Solar Roadway is a series of structurally-engineered solar panels that are driven upon. The idea is to replace all current petroleum-based asphalt roads, parking lots, and driveways with Solar Road Panels that collect energy to be used by our homes and businesses. The renewable energy generated by solar road panels will replace the current need for fossil fuel which is used for generation of electricity as also oil used for driving the vehicles which in turn reduces the greenhouse gases nearly to half. The implementation of Solar Roadways Technology will create the clean energy boom, spurring private investment on a massive scale, with relatively little extra cost. An intelligent highway infrastructure and a self-healing decentralized power grid that will eliminate our need for fossil fuels. Solar Roadways will also features wildlife preservation, the elimination of impervious surfaces, law enforcement, DUI detection, counter-terrorism, etc. It provides a decentralized, secure, intelligent, self-healing power grid which pays for itself. Today more than ever we see and feel the consequences of the climate change. From
melting ice caps, to the rising sea levels, weather changes and temperature rises, there are
more and more natural disasters that we learn about from the news. People have come up with many different kinds of methods and solutions in order to fight these changes but not many of them are as effective as needed. Thus we need to step on more complex approaches and more general and interlinked solutions for solving the pressing problems.There is, however, a technology that can help us to normalize our climate, but also help in our daily lives. We offer Smart Solar Roadways as one possible solution that can drastically change our way of living for better. Smart Solar roads combine different solutions in one – it can help us to improve energy production from solar panels, to collect and distribute rain water, to provide a digital platform for Smart city, to facilitate emerging electric cars and driver-less cars and much more! We believe that this approach can offer many additional benefits to citizens, to the environment and will contribute for sustainable development as a whole. Some may call it even the next “Industrial revolution”, we like to think of it like a better tomorrow. So it’s time to upgrade our infrastructure (especially roads & power grids) with the 21st century technology i.e.
“Solar Roadways”.
What's hot (19)
The Best Motor for Hybrid Electric Vehicle Powertrains
The Best Motor for Hybrid Electric Vehicle Powertrains
Viewers also liked
Privacy Balance Sought - Letter to Editor - Applied Clinical Trials 2001
The document discusses how the terrorist attacks on September 11th may impact privacy policies in healthcare. It notes that privacy has been heavily debated with the passage of HIPAA but the full impact on clinical trials is still being assessed. It argues that Americans are willing to concede some privacy for increased security and a similar concession could happen in healthcare that enables faster access to medical advances. However, privacy restrictions currently hinder this by limiting access to databases to match patients to studies and may deny patients treatment opportunities. Striking a balance between privacy and advancing medical treatments, like the balance between privacy and security, will require some concessions to privacy to achieve goals.
SOA Database Connectivity Issues Showing DatabaseException Internal Exception
Imaging activity is causing performance issues in the Production environment. Errors are occurring related to database connections timing out or being disabled. The root causes include slow databases, large payloads, and network interruptions. Increasing the connection timeout values and capacities of the connection pools for databases like SOADataSource can help resolve the issues.
Planning the blog
This blog is being planned as a resource for 5th grade students who are beginners and have difficulties learning. It will include PowerPoint presentations, crossword puzzles, videos with introductions, vocabulary games, and audio to help students compare physical activities and describe their families. The presentation introduces the blogger's plan to create an educational blog for 5th graders.
Agenda enero27 2014
El resumen presenta la agenda semanal del 27 de enero al 31 de enero en el Instituto Santa María Goretti. Cada día de la semana incluye las horas de entrada y salida de los estudiantes, así como las actividades planeadas como ambientación sobre funciones democráticas y gobierno escolar. El jueves incluye un consejo académico y una inducción a nuevos estudiantes, mientras que el viernes es el plazo para entregar planificaciones y proyectos del primer período, y se realizará una reunión de teatro. El s
The simple truth
A survey found that the top reasons employees waste time at work are lack of challenge (34%), long hours (34%), lack of incentive to work harder (32%), job dissatisfaction (30%), boredom (23%), and low wages (18%). The survey suggests employees slip into time wasting habits due to feeling unmotivated or unrewarded in their roles.
Las redes sociales
Las redes sociales son plataformas virtuales que conectan a las personas y les permiten compartir información e ideas. Estas redes han evolucionado de sistemas analógicos a plataformas digitales como Facebook y Twitter que brindan nuevas formas de que las personas se comuniquen y colaboren en línea de manera global.
Redes sociales
Aquí voy a hablar a cerca de las redes sociales y cuales tienen mas popularidad hasta ahora.
Generalmente nos brindan muchos beneficios en la vida cotidiana como resolución de problemas, hacer planes, comunicarse, divertirse, informarse, desarrollar trabajos con mas facilidad y otras cosas.
Schema Upgradation from previous version to latest version in Oracle database
To upgrade an Oracle schema from version 11.1.6.0 to 11.1.1.9, first navigate to the Oracle Home bin directory. Run the PSA tool to start the upgrade wizard. Select the component to upgrade along with any prerequisites and enter connection details for the MDS and SOAINFRA schemas. Monitor the installation process and then verify the schema versions have updated correctly.
Risk assessment of pharmacueticals
This document provides an overview and summary of a conference on the perception and management of drug safety risks. It discusses the increasing public focus on drug risks over the past decades and the challenges around balancing risks and benefits. The conference brought together experts from academia, pharmaceutical companies, regulatory agencies, and consumer advocacy groups to have an open dialogue on improving understanding of risk perception, benefit-risk assessment, and risk communication regarding pharmaceutical products on an international level. It aimed to recognize the social dimensions of drug safety and risk management and identify opportunities for multidisciplinary collaboration to address existing issues.
6 Steps to Accelerate the Development Cycle | Life Science Parker Hannifin
6 Steps to Accelerate the Development Cycle | Life Science Parker HannifinParker Hannifin Corporation
Six Strategies to Get Your Instrument Development Moving
Speeding up the instrument specification process and reducing the need for extensive iterations can greatly accelerate development time. The keys are to fail early and fail on paper, eliminating expensive and time consuming hardware iterations.
Download the whitepaper.
http://solutions.parker.com/6steps-motion-system-ontime-and-underbudgetPatient centric site training to enhance clinical trial performance
In the quest to accelerate the clinical trial process, we involve patients as partners;
We obtain patient insights that are used to:
Fine tune aspects of the clinical protocol for compliance and adherence
Train sites on how to effectively communicate with patients about the clinical trial to increase recruitment rates
Prepare sites to manage patient expectations about clinical trial participation to increase retention rates
We conduct dynamically facilitated Study Seminars that prepare sites for the patient encounter
We have measurable results: Study sites that participate in patient-centric Study Seminars will perform at a higher rate for patient recruitment and retention
Instructivo para la instalacion en linux de la impresora multifuncional canon...
Este documento proporciona instrucciones para configurar una impresora multifuncional Canon ImageRunner 1025N en Linux. Primero, se verifica si el sistema reconoce el dispositivo USB y se actualizan los drivers. Luego, se descarga el driver específico para la impresora desde un enlace proporcionado y se instala usando comandos como dpkg. Finalmente, se usa CUPS para completar la instalación de la impresora y probarla imprimiendo una página.
Faiz's resume 130316
1. Ahmad Faiz bin Mohd Nor is seeking employment as an electrical and instrumentation technician with over 15 years of experience in various roles.
2. He holds several certificates in relevant fields and has worked at BASF Petronas Chemical and Lynas Malaysia, where he was involved in plant maintenance, shutdown activities, and safety committees.
3. He has skills in programmable logic control, distributed control systems, calibration, troubleshooting, and nuclear radiation protection.
Terence Moses Resume
Terence Moses is a 51-year-old Malaysian man with over 21 years of experience in advertising and casting. He currently works as the casting director for Orbit One Casting and has worked on commercials for brands like Colgate, Maxis, Samsung, and more. In addition to his work experience, the document provides details on his personal information, languages spoken, education history, and hobbies which include football, running, movies and traveling.
Viewers also liked (17)
Privacy Balance Sought - Letter to Editor - Applied Clinical Trials 2001
Privacy Balance Sought - Letter to Editor - Applied Clinical Trials 2001
SOA Database Connectivity Issues Showing DatabaseException Internal Exception
SOA Database Connectivity Issues Showing DatabaseException Internal Exception
Schema Upgradation from previous version to latest version in Oracle database
Schema Upgradation from previous version to latest version in Oracle database
6 Steps to Accelerate the Development Cycle | Life Science Parker Hannifin
6 Steps to Accelerate the Development Cycle | Life Science Parker Hannifin
Patient centric site training to enhance clinical trial performance
Patient centric site training to enhance clinical trial performance
Instructivo para la instalacion en linux de la impresora multifuncional canon...
Instructivo para la instalacion en linux de la impresora multifuncional canon...
Similar to Presentation dmwcfu420
Microhybrid Goes Mainstream: Battery Selection and Trends
Microhybrid technologies are becoming standard features to help vehicles meet tightening fuel economy and emissions regulations in Europe. Lead-acid batteries are currently the mainstream solution for energy storage in first-generation microhybrids, but will need to significantly improve their dynamic charge acceptance to remain competitive against alternatives for next-generation microhybrids launching in 2013 and beyond. Dual storage systems combining lead-acid with supercapacitors or lithium-ion batteries could meet higher demands but at a higher cost.
Km62 solar powered ebike (wecompress)
Mechanical engineering project topics for final year, 1000KV Technologies, Live projects 1000kv technologies, EEE project list, mechatronics projects, live projects ameerpet, live projects near me, live projects institutes Hyderabad, mechanical projects hyderabad,
1000KV Technologies Live projects 9030844877, 9030844866 Educational consultant in Hyderabad, Telangana
Address: #A2, Eureka court complex, 2nd floor, kallu compound road, 2nd floor, A2 flat, image hospital near, Ameerpet, Hyderabad, Telangana 500016
IRJET- Electric Vehicle Mechanism
This document discusses electric vehicle mechanisms. It begins by defining electric vehicles and noting they use electric motors powered by batteries or solar panels rather than gasoline. It then covers the history of electric vehicles dating back to 1827 and discusses how they gained more popularity in the early 1900s but declined due to battery limitations. The main sections summarize the working of electric vehicle components like induction motors, inverters, and lithium-ion batteries. It compares electric vehicles favorably to internal combustion engines in aspects like direct rotational motion, uniform power output, and higher power-to-weight ratios. The conclusion discusses the need to improve batteries and charging to make electric vehicles more viable and reduce pollution from gasoline vehicles.
Generator Based Alternate Charging and Discharging Battery System
This document proposes a new concept for charging electric vehicle batteries using a generator attached to the front wheels. As the vehicle moves, the generator will produce a variable voltage to charge the batteries. A voltage regulator is used to stabilize the output voltage and charge the batteries effectively while driving. A second battery is also used so that one battery can charge while the other powers the vehicle. Testing showed the generator could produce 10-35V, and with a boost converter, efficiently charge the battery to 80% in 3 hours during driving. This concept aims to improve electric vehicle range by opportunistically charging the batteries during motion.
PHEV PPT.pptx
1) The document discusses different types of hybrid electric vehicles, including series, parallel, and series-parallel configurations. It describes the basic components and power flow characteristics of each.
2) Control strategies for hybrid electric vehicles aim to optimize fuel efficiency, emissions, costs, and performance by regulating power flow between components like the internal combustion engine and electric motor(s). The optimal operating points for factors like engine speed and load are considered.
3) Hybrid drive trains can operate in different modes like using the engine and motor together during acceleration, the engine alone during normal driving, or capturing energy during braking. The complex interactions between components require sophisticated control systems.
hybrid electric truck document
The document discusses hybrid electric trucks (HETs). It provides details on the key components of HETs including lithium-ion batteries, electric motors, generators, and power converters. It describes the two main types of powertrain systems for HETs - series and parallel. The series system has no direct mechanical connection between the engine and transmission, allowing the engine to run at peak efficiency. The parallel system allows both the electric motor and engine to power the vehicle directly or together. Charging can occur through standard outlets, charging stations, regenerative braking, and with a range extender during low battery voltage. Driving an HET differs in not requiring a clutch compared to mechanical vehicles.
First
This document summarizes the history and technology trends of electric vehicles. It discusses the different types of electric motors that have been used in EVs, including DC motors, induction motors, permanent magnet synchronous motors, and reluctance motors. It also describes different driveline configurations and the factors influencing battery selection. While induction motors currently dominate the market, the document concludes that permanent magnet motors and reluctance motors show better performance but that all motor types could see increased use as the EV market grows.
Teslas JB Straubel at SCES2014 - Future of EVS gigafactories, battery storage...
The document summarizes a presentation given by JB Straubel, CTO and co-founder of Tesla, at the Southern California Energy Summit on October 10th, 2014. The presentation discussed Tesla's history of developing electric vehicles using lithium-ion batteries, which provide major improvements over lead-acid batteries. It also outlined Tesla's plans to produce the Model X SUV in 2015, and an affordable Model 3 sedan for the mass market by about 2020. Finally, it described Tesla's plans for a Gigafactory to produce lithium-ion battery cells at massive scale to enable electric vehicles to achieve cost and performance parity with gasoline vehicles.
Hybrid electric vehicle
This document discusses hybrid electric vehicles (HEVs). It describes three main HEV drivetrain architectures: series, parallel, and series-parallel. It also discusses different types of electric motor drives used in HEVs, including permanent magnet motors, induction motors, and switched reluctance motors. For energy storage, it covers chemical batteries, ultracapacitors, and hybrid energy storage systems combining the two. In conclusion, it states that HEVs provide a solution to problems like air pollution and are a viable alternative in the short term.
Hybrid Electric Vehicle By Arjun T R
A detailed presentation about hybrid car and its motor drives.It helps you to understand more about HEV in detail.And also it contains all parts of HEV.
Design and Analysis Of Hybrid Car Using Tubular Frame Chasis and Helium Gas
This document describes the design and analysis of a hybrid car using a tubular frame chassis and helium gas. It discusses the components of the car including the electric DC motor, frame, battery, and drive. Chromoly steel 4130 is selected for the tubular frame chassis due to its high strength and stiffness properties. Helium gas is selected to fill the chassis due to its low density, lifting properties, and compliance with regulations. Structural analysis using ANSYS software shows the maximum deformation of the chassis design is within permissible limits. The car is powered by a battery and electric DC motor, with the goal of reducing weight through the use of helium gas in the frame.
ELECTRICAL VEHICLES
This document discusses electric vehicles as an alternative to combustion engine vehicles. It provides information on:
1) The energy losses associated with different types of vehicles, such as combustion engine vehicles losing 76% of energy during urban driving, while electric vehicles only lose 10% of energy from the motor.
2) The characteristics and performance of electric traction motors, including their constant torque at low speeds and constant power at high speeds.
3) Examples of electric vehicles currently in production, such as the Tesla Roadster, eBox, Mitsubishi i-MiEV, Toyota Prius plug-in hybrid, and Chevrolet Volt extended-range electric vehicle.
4) Battery technologies used in
VGEF 2015: The Future of Transportation (JB Straubel, CTO, Tesla Motors Inc)
Presentation from the 2015 Vail Global Energy Forum at Beaver Creek (March 14-15, 2015). More information at www.vailglobalenergyforum.com
Electric car
The document discusses electric vehicles. It begins with an introduction to electric cars, noting they are propelled by electric motors powered by batteries. It then discusses the various types of electric vehicles and the benefits of electric cars over combustion engines, including reduced emissions and less dependency on oil. The document also covers the historical development of electric cars, when they can be purchased, how they work mechanically, and production costs and timelines for an electric car project. It concludes that electric vehicles have significant potential to reduce emissions if charged from renewable sources.
Scope of automobile engineering 2020 - 2050 - (BS6 & Electric Vehicles, Micro...
Inventions
Foot Prints in India
What, When & Why is Bharat Stage Revolution
Bs6 Basics
EVs’ Types
Key Parts of a Battery Electric Vehicle
Charger modes AC and DC Charging Basics
Jobs and Business Opportunities in India
Driverless Technology in India
Automobile Associations in India
EPRI C&I ET Guide - FINAL
This document provides an overview of electric vehicle and equipment opportunities in commercial and industrial sectors. It discusses the benefits of electrification, including reducing emissions, saving money through lower fuel and maintenance costs, and improving productivity. Examples of electric vehicles and equipment currently used in various industries like airports, seaports, mining, goods transportation, and people movement are provided. These include airport ground support equipment, cranes, mining equipment, forklifts, and public transit vehicles. The document also includes a charging primer and discusses infrastructure considerations for commercial electric fleets.
Fabrication of-motorized-hydraulic-jack
With the increasing levels of technology, the efforts are being put to produce any kind of work that has been continuously decreasing. The efforts required in achieving the desired output can be effectively and economically be decreased by the implementation of better designs. Power screws are used to convert rotary motion into reciprocating motion.
eMobility at Daimler Trucks North America by Alex Voets
Alex Voets, eMobility Product and Sales Strategy Manager at Daimler Trucks North America, gave this presentation at Forth's networking event on November 20, 2019.
Design of Electrical Vehicles
The document discusses the design of electrical vehicles. It begins by outlining the problem of air pollution in India and how electric vehicles can help reduce it. It then describes the typical architecture of an electric vehicle, including the electric motor, battery pack, inverter, charger, and DC-DC converter. It discusses different types of electric motors that can be used such as DC motors, induction motors, and permanent magnetic synchronous motors. It also covers various types of batteries used in electric vehicles, notably lithium-ion batteries. In conclusion, the document states that electric vehicles produce fewer greenhouse gases and air pollutants than gasoline or diesel vehicles.
E-mobility | Part 3 - Battery recycling & power electronics (English)
While electric vehicles (EV) are widely viewed as a scalable green mobility solution, running on batteries may pose an impact on the environment as battery retirement concerns arise.
New innovations are emerging across the battery value chain from raw materials and cell components to battery management and sustainability. Governments and companies worldwide are participating in battery recycling efforts to ease battery material demand and alleviate supply chain concerns. As EV adoption continues to scale, regulators are drafting new laws for battery waste management.
Read more here: https://bit.ly/36mSeft
Similar to Presentation dmwcfu420 (20)
Microhybrid Goes Mainstream: Battery Selection and Trends
Microhybrid Goes Mainstream: Battery Selection and Trends
Generator Based Alternate Charging and Discharging Battery System
Generator Based Alternate Charging and Discharging Battery System
Teslas JB Straubel at SCES2014 - Future of EVS gigafactories, battery storage...
Teslas JB Straubel at SCES2014 - Future of EVS gigafactories, battery storage...
Design and Analysis Of Hybrid Car Using Tubular Frame Chasis and Helium Gas
Design and Analysis Of Hybrid Car Using Tubular Frame Chasis and Helium Gas
VGEF 2015: The Future of Transportation (JB Straubel, CTO, Tesla Motors Inc)
VGEF 2015: The Future of Transportation (JB Straubel, CTO, Tesla Motors Inc)
Scope of automobile engineering 2020 - 2050 - (BS6 & Electric Vehicles, Micro...
Scope of automobile engineering 2020 - 2050 - (BS6 & Electric Vehicles, Micro...
eMobility at Daimler Trucks North America by Alex Voets
eMobility at Daimler Trucks North America by Alex Voets
E-mobility | Part 3 - Battery recycling & power electronics (English)
E-mobility | Part 3 - Battery recycling & power electronics (English)
Presentation dmwcfu420
- 2. DOMESTIC HYBRID TECHNOLOGY The main technology's covered in this presentation will be - Batteries - Regenerative braking - Permanent Magnet Electric Motors - Atkinson Cycle
- 4. LITHIUM ION
- 6. REGENERATIVE BRAKING Recharges the battery Uses the inertia of the vehicle Reverses the current flow direction through the battery
- 8. ATKINSON CYCLE Variable compression rate engine Uses variable intake valve timing
- 9. THANK YOU Good luck Types of lithium-ion. (n.d.). batteryuniversity.com/learn/article/types_of_lithium_ion Chevy volt battery. (n.d.). media.gm.com/content/dam/Media/microsites/product/volt/docs/battery_101.pdf C-max technical specs. (2013, 03 13). http://media.ford.com/images/10031/2013_CMAX_Specs.pdf Permanent magnet motors. (n.d.). http://www.element14.com/community/community/news/blog/2011/11/01/permanent-magnet-motor-how-it-works-and-when-to-see-it-in- use Hall-Geisler, K. (2013). How an atkinson cycle engine works. http://auto.howstuffworks.com/atkinson-cycle-engine1.htm