pre cast
•Download as PPTX, PDF•
4 likes•1,768 views
This report discusses the pre-cast concrete construction of typical 3 bedroom hall kitchen (3BHK) apartments. It includes the floor plan layout, column and beam layout, section details showing wall and slab connections, and isometric views providing 3D renderings. The report was submitted to architecture professors by two 8th semester architecture students as part of their pre-cast concrete construction coursework.
Report
Share
Report
Share
Recommended
SurfaceAtlas Introduction
SurfaceAtlas is software that can model any surface or subsurface using three methods: triangulation, inverse distance weighted interpolation, or surface fitting of varying polynomial orders. It allows users to visualize subsurface structures in 3D and better understand the evolution of the Earth over time. The software was created by Guimin Geophysical.
Date SHeet.docx
This document provides the date sheet for exams for B.Tech and M.Tech students in Civil Engineering at a university. It lists the course exams that will take place each day from November 29th to December 30th for second, third, fourth, fifth, seventh semesters of B.Tech and first and third semesters of regular and part-time M.Tech programs in transportation engineering, structural engineering, and other specializations. The exams will be held in the morning session from 10am to 1pm at the university's main campus.
Structural Design
This document provides information on the structural analysis of a design project completed on May 24, 2018. It was designed by Jayaraj.B and guided by Prasana, containing isometric views and details on loading, shear, moment, stress, job information, and section properties of the structure.
Precast concrete construction
Precast concrete construction involves casting concrete structural elements at a manufacturing facility rather than on site. This allows for rapid construction, high quality control, and easy incorporation of prestressing. Precast concrete provides advantages like speed of erection, durability, and economy, but also has disadvantages such as weight, limited flexibility in design, and need for skilled workmanship and lifting equipment on site. Common precast concrete elements include walls, slabs, beams, and structural framing using techniques like welded plates and rebar splicing.
PreCast Construction
This document discusses precast concrete construction. Some key points:
- Precast concrete elements are cast and cured off-site then transported for assembly, allowing more efficient production and quality control.
- Elements include slabs, beams, columns, and wall panels that are joined on-site through embedded bolts, plates, and grouted connections.
- The precasting process involves casting concrete around prestressing strands to add strength, then cutting sections and transporting them for erection.
PRECAST BUILDING SYSTEM
The document discusses precast concrete buildings. It begins with an introduction to precast construction and its advantages over conventional construction. It then describes various precast elements like beams, columns, slabs, walls, and connections. It discusses construction methodology, design considerations, cost comparison to cast-in-situ, standards, and provides case studies of precast buildings in India and abroad.
Prefabricated structures
This document provides an overview of prefabricated modular structures. It discusses the introduction and features of prefabricated structures, comparing them to site-cast structures. It outlines the design concept, components, types of precast systems including large panel, frame, and lift-slab systems. It also discusses design considerations, equipment used, assembly process, scheduling, advantages including reduced costs and time, limitations, and concludes with examples of prefabricated hospital structures.
Precast Concrete Steps Construction Tutorial by Armtec Ltd.
Armtec Ltd. specializes in the construction of precast concrete steps and precast concrete decks. This tutorial gives insight into the process from start to finish, explaining the intricate stages in deciding on the perfect precast steps and decks for you. Concrete steps are a fast, durable and cost-effective way of providing access to residences, apartments and condominiums.
Recommended
SurfaceAtlas Introduction
SurfaceAtlas is software that can model any surface or subsurface using three methods: triangulation, inverse distance weighted interpolation, or surface fitting of varying polynomial orders. It allows users to visualize subsurface structures in 3D and better understand the evolution of the Earth over time. The software was created by Guimin Geophysical.
Date SHeet.docx
This document provides the date sheet for exams for B.Tech and M.Tech students in Civil Engineering at a university. It lists the course exams that will take place each day from November 29th to December 30th for second, third, fourth, fifth, seventh semesters of B.Tech and first and third semesters of regular and part-time M.Tech programs in transportation engineering, structural engineering, and other specializations. The exams will be held in the morning session from 10am to 1pm at the university's main campus.
Structural Design
This document provides information on the structural analysis of a design project completed on May 24, 2018. It was designed by Jayaraj.B and guided by Prasana, containing isometric views and details on loading, shear, moment, stress, job information, and section properties of the structure.
Precast concrete construction
Precast concrete construction involves casting concrete structural elements at a manufacturing facility rather than on site. This allows for rapid construction, high quality control, and easy incorporation of prestressing. Precast concrete provides advantages like speed of erection, durability, and economy, but also has disadvantages such as weight, limited flexibility in design, and need for skilled workmanship and lifting equipment on site. Common precast concrete elements include walls, slabs, beams, and structural framing using techniques like welded plates and rebar splicing.
PreCast Construction
This document discusses precast concrete construction. Some key points:
- Precast concrete elements are cast and cured off-site then transported for assembly, allowing more efficient production and quality control.
- Elements include slabs, beams, columns, and wall panels that are joined on-site through embedded bolts, plates, and grouted connections.
- The precasting process involves casting concrete around prestressing strands to add strength, then cutting sections and transporting them for erection.
PRECAST BUILDING SYSTEM
The document discusses precast concrete buildings. It begins with an introduction to precast construction and its advantages over conventional construction. It then describes various precast elements like beams, columns, slabs, walls, and connections. It discusses construction methodology, design considerations, cost comparison to cast-in-situ, standards, and provides case studies of precast buildings in India and abroad.
Prefabricated structures
This document provides an overview of prefabricated modular structures. It discusses the introduction and features of prefabricated structures, comparing them to site-cast structures. It outlines the design concept, components, types of precast systems including large panel, frame, and lift-slab systems. It also discusses design considerations, equipment used, assembly process, scheduling, advantages including reduced costs and time, limitations, and concludes with examples of prefabricated hospital structures.
Precast Concrete Steps Construction Tutorial by Armtec Ltd.
Armtec Ltd. specializes in the construction of precast concrete steps and precast concrete decks. This tutorial gives insight into the process from start to finish, explaining the intricate stages in deciding on the perfect precast steps and decks for you. Concrete steps are a fast, durable and cost-effective way of providing access to residences, apartments and condominiums.
A study on the construction process (Precast concrete, In-situ cast concrete,...
A study on the construction process (Precast concrete, In-situ cast concrete,...Bhaddin Al-Naqshabandi
This document provides an overview of precast concrete construction, in-situ cast concrete construction, shoring, and underpinning. It describes that precast concrete elements are cast off-site and include items like slabs, beams, and wall panels. In-situ concrete is poured on-site and can form any shape but requires more time and resources. Shoring uses temporary structures like rakers to support unstable structures during construction. Underpinning strengthens existing foundations, for example by adding new piles or walls underneath for additional support.Introduction to prestressed concrete
Pre-stressed concrete uses tensioned steel strands or bars to place concrete in compression before application of service loads. This counters the tensile stresses induced by loads and prevents cracking. There are two main methods: pre-tensioning applies tension before pouring concrete, while post-tensioning tensions strands after concrete curing. Pre-stressed concrete allows for smaller and lighter structures that resist loads, deflection, and cracking better than reinforced concrete.
Ferrocement ppt
Ferrocement is a thin reinforced concrete made of wire mesh and cement mortar. It was introduced in 1943 and offers high strength and flexibility compared to conventional concrete. Ferrocement consists of thin layers of wire mesh embedded in and covered by a sand-cement mortar mix, with a typical ratio of 5% wire mesh to 95% mortar. It can be formed into various shapes by hand or machine and has applications in construction, agriculture, transportation and more due to its strength, versatility and affordability.
Prestressed concrete
This document discusses different methods of prestressing concrete, including pretensioning and post-tensioning. Pretensioning involves stressing steel tendons before placing concrete around them, while post-tensioning involves stressing tendons after the concrete has cured using hydraulic jacks. Post-tensioning allows for longer spans, thinner slabs, and more architectural freedom compared to conventional reinforced concrete or pretensioned concrete. Common applications of post-tensioning include parking structures, bridges, and building floors and roofs.
Environment friendly building_material_technologies_for_low_cost_housing
Environment friendly building_material_technologies_for_low_cost_housing where u can use the various materials and there impact on enviroment
There implication with other materials .
SHOTCRETE TECHNOLOGY
Shotcrete, or sprayed concrete, was first used in 1907 and involves pneumatically projecting a concrete or mortar mixture at high velocity onto a surface. There are two main processes - dry process involves adding water at the nozzle, while wet process fully mixes all ingredients beforehand. Shotcrete provides advantages for constructing curved surfaces like domes and tunnels efficiently due to its ability to be sprayed onto irregular surfaces with little formwork needed. It allows for material placement in hard to access areas.
10 tips to improve the way you speak english
CAN I NEUTRALISE MY ACCENT ?
Yes, you can. All you need to do is train yourself to speak English as comfortably and perfectly as you speak your mother tongue.
Pre-cast Concrete Panel Use in Freeway Rehabilitation
This document discusses how non-destructive testing can help prolong the life of aging infrastructure like highways. It describes the highway design and repair processes and the types of non-destructive tests used in evaluating highways, including falling weight deflectometer testing and ground penetrating radar. The document also outlines guidelines for determining the appropriate repair method based on load transfer efficiency test results and considers how non-destructive testing may be applied at the construction level and help the future of highway repair.
Steel frame work
The document discusses options for constructing a mobile showroom with large spans and within a short timeframe. It analyzes using pre-cast concrete or a steel frame. A steel frame is proposed due to requirements for immediacy, its single-story design, ability to have large spans without restrictions, and advantages of speedy erection, less on-site work, flexibility, and value. Standard steel sections, connections, and passive fire protection via spray coating are presented.
Slipform construction
Slip form construction is a method where concrete is poured into a continuously moving form to construct structures without joints. There are two main types - vertical slip forming used for tall structures like buildings and towers, and horizontal slip forming for pavement. The moving formwork is supported by hydraulic jacks and remains intact until the entire structure is completed, allowing faster construction at lower cost compared to traditional formwork. Slip forming produces monolithic, jointless structures but requires careful planning of the construction process and a skilled workforce.
6 shotcrete
Shotcrete can be used to seal surfaces, preserve ground strength, support individual blocks, and form structural arches. It acts as a barrier to water movement and seals weak or expanding clays. By sealing surfaces and providing continuous support, shotcrete minimizes ground loosening and smoothes surface contours to preserve ground strength. It also acts as a simple bridge of support between individual blocks. Shotcrete thus provides various functions to stabilize underground structures through sealing, strengthening, and supporting excavated grounds and installed structures.
Experimental study of precast portal frame
This document describes an experimental study comparing the structural behavior of monolithic and precast concrete portal frames. Scaled models of a monolithic frame and two precast frames (one with a corbel connection and one without) were tested under a two-point load. Test results showed that the monolithic frame had the highest deflections but lowest load capacity, while the precast frame with a corbel connection had the lowest deflections but highest load capacity. Cracks were first observed in the monolithic frame, followed by the precast frame without a corbel, with the frame with a corbel cracking at the highest loads. In conclusion, the monolithic frame was found to be the most ductile but least stiff, while
Shotcrete technology
Shortcreting has proved to be the best method for construction of curved surfaces. Domes are now much easier to construct with the advent of shotcrete technology. Tunnel linings are also becoming easy with this technology. Not only are these but there a wide range of applications where this technology has been a leading one. This technical paper includes the concept of shotcrete and how it differs from conventional concrete. It also enumerates the different types of process involved in shotcreting i.e. dry mix process and wet mix process. Advantages of shotcrete and its applications in various fields like tunneling, canals, buildings etc. are specified in detail. This paper presents an overview of shotcreting technology along with its applications.
DEFINITION OF SHOTCRETE:-
Shotcrete is a mortar or high performance concrete conveyed through a hose and pneumatically projected at high velocity onto a backing surface. It is the force of this spraying action that leads to compaction of the concrete or mortar which then forms layers of concrete to the required thickness. Shotcreting has been an acceptable way of placing cementitious material in a variety of applications.
Usually patented polypropylene fibers are included in the shotcrete which increases the cohesive nature of the shotcrete through mechanically binding the cementitious materials together. This mechanism reduces the rebound waste that occurs through the shotcreting process and these fibers also resist plastic shrinkage and cracking through their ability to enhance the early stage tensile strength of concrete.
Shotcrete also gives better surface finishes and reduces surface tearing on non- linear sections. Cementitious material containing the poly propylene fibers resist cycles of freezing and thawing and also reduces the chances of water and chemical penetrations.
Ferro cement
This document discusses ferrocement, which is a reinforced concrete made of cement mortar and closely spaced steel mesh or rods. It describes the materials used including cement mortar mix, skeleton steel, and steel mesh reinforcement. It outlines the properties of ferrocement such as durability, strength, and flexibility. Finally, it covers the applications, advantages like cost effectiveness, and disadvantages of ferrocement.
prestressed concrete
Prestressed concrete is concrete that is placed under compression prior to service loads being applied through tensioning of steel tendons. This counteracts tensile stresses from loads to improve the performance of the concrete. Eugene Freyssinet is considered the father of prestressed concrete, developing techniques like high strength steel wires and conical wedges for post-tensioning in the 1930s-1940s. Prestressing can be through pre-tensioning or post-tensioning, depending on if the steel is tensioned before or after the concrete is cast. Popular post-tensioning systems include Freyssinet, Magnel Blaton, Gifford-Udall, and Lee-McCall methods. Prestressed concrete provides
Ferrocement
Ferrocement is a thin reinforced concrete made of cement mortar and wire mesh. It is strong, durable, and low-cost. Common applications include walls, floors, roofs, water tanks, bridges, and marine structures. Ferrocement is 2-5 cm thick and has a cement mortar mix reinforced with steel mesh or rods. It was invented in the 1850s and methods of construction include skeletal armature, closed mould, integral mould, and open mould. Ferrocement is used Residential buildings, marine applications, water and sanitation infrastructure, agriculture, renewable energy, and other structures.
Ferro cement
Ferrocement is a composite material made of cement, sand, water and wire mesh. It is thin and lightweight but has high tensile strength. Ferrocement elements are 2-3 cm thick with wire mesh reinforcement. It has applications in water tanks, boats, benches and roofs due to its strength, repair ability and moldability. It can be cast using various techniques like hand plastering, semi-mechanized process, centrifuging and guniting. Centrifuging and guniting provide better compaction for pressure pipes and prefabricated units.
Low cost residential building using locally available materials
The document discusses strategies for low-cost residential building using locally available materials. It proposes using locally sourced materials and construction techniques to reduce costs. Rat-trap bond brickwork, soil cement blocks, hollow concrete blocks, and filler slab roofing are presented as methods to lower expenses. The techniques aim to cut building material and labor costs by 25-40% compared to traditional construction, making housing more affordable.
Ferrocement
The document discusses ferrocement, which is a type of reinforced concrete using closely spaced layers of mesh or small rods encapsulated in mortar. Ferrocement consists of a cement mortar mix reinforced with steel mesh or fiber-reinforced polymer meshes and steel rods. It has several advantages over reinforced concrete including high strength, stiffness, impact resistance, and ability to withstand large deformations. Ferrocement can be used for applications such as tanks, floors, waterproofing, manhole covers, buildings, pipes, bridges, and strengthening existing concrete structures. It is applied using hand plastering, semi-mechanized processes, centrifuging, or guniting.
PPT ON SHOTCRETE TECHNOLGY BY MD AMANULLAH
Shotcrete, also known as sprayed concrete, is a concrete conveyed through a hose and pneumatically projected at high velocity onto a surface. It undergoes compaction during placement due to the force of projection. Shotcrete can be used on irregular surfaces like domes and tunnels and has advantages over conventional concrete like requiring little framework. The document discusses shotcrete materials, equipment, processes, applications and advantages/disadvantages versus conventional concrete. Common applications include tunnel linings, slope stabilization, and infrastructure rehabilitation.
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
More Related Content
Viewers also liked
A study on the construction process (Precast concrete, In-situ cast concrete,...
A study on the construction process (Precast concrete, In-situ cast concrete,...Bhaddin Al-Naqshabandi
This document provides an overview of precast concrete construction, in-situ cast concrete construction, shoring, and underpinning. It describes that precast concrete elements are cast off-site and include items like slabs, beams, and wall panels. In-situ concrete is poured on-site and can form any shape but requires more time and resources. Shoring uses temporary structures like rakers to support unstable structures during construction. Underpinning strengthens existing foundations, for example by adding new piles or walls underneath for additional support.Introduction to prestressed concrete
Pre-stressed concrete uses tensioned steel strands or bars to place concrete in compression before application of service loads. This counters the tensile stresses induced by loads and prevents cracking. There are two main methods: pre-tensioning applies tension before pouring concrete, while post-tensioning tensions strands after concrete curing. Pre-stressed concrete allows for smaller and lighter structures that resist loads, deflection, and cracking better than reinforced concrete.
Ferrocement ppt
Ferrocement is a thin reinforced concrete made of wire mesh and cement mortar. It was introduced in 1943 and offers high strength and flexibility compared to conventional concrete. Ferrocement consists of thin layers of wire mesh embedded in and covered by a sand-cement mortar mix, with a typical ratio of 5% wire mesh to 95% mortar. It can be formed into various shapes by hand or machine and has applications in construction, agriculture, transportation and more due to its strength, versatility and affordability.
Prestressed concrete
This document discusses different methods of prestressing concrete, including pretensioning and post-tensioning. Pretensioning involves stressing steel tendons before placing concrete around them, while post-tensioning involves stressing tendons after the concrete has cured using hydraulic jacks. Post-tensioning allows for longer spans, thinner slabs, and more architectural freedom compared to conventional reinforced concrete or pretensioned concrete. Common applications of post-tensioning include parking structures, bridges, and building floors and roofs.
Environment friendly building_material_technologies_for_low_cost_housing
Environment friendly building_material_technologies_for_low_cost_housing where u can use the various materials and there impact on enviroment
There implication with other materials .
SHOTCRETE TECHNOLOGY
Shotcrete, or sprayed concrete, was first used in 1907 and involves pneumatically projecting a concrete or mortar mixture at high velocity onto a surface. There are two main processes - dry process involves adding water at the nozzle, while wet process fully mixes all ingredients beforehand. Shotcrete provides advantages for constructing curved surfaces like domes and tunnels efficiently due to its ability to be sprayed onto irregular surfaces with little formwork needed. It allows for material placement in hard to access areas.
10 tips to improve the way you speak english
CAN I NEUTRALISE MY ACCENT ?
Yes, you can. All you need to do is train yourself to speak English as comfortably and perfectly as you speak your mother tongue.
Pre-cast Concrete Panel Use in Freeway Rehabilitation
This document discusses how non-destructive testing can help prolong the life of aging infrastructure like highways. It describes the highway design and repair processes and the types of non-destructive tests used in evaluating highways, including falling weight deflectometer testing and ground penetrating radar. The document also outlines guidelines for determining the appropriate repair method based on load transfer efficiency test results and considers how non-destructive testing may be applied at the construction level and help the future of highway repair.
Steel frame work
The document discusses options for constructing a mobile showroom with large spans and within a short timeframe. It analyzes using pre-cast concrete or a steel frame. A steel frame is proposed due to requirements for immediacy, its single-story design, ability to have large spans without restrictions, and advantages of speedy erection, less on-site work, flexibility, and value. Standard steel sections, connections, and passive fire protection via spray coating are presented.
Slipform construction
Slip form construction is a method where concrete is poured into a continuously moving form to construct structures without joints. There are two main types - vertical slip forming used for tall structures like buildings and towers, and horizontal slip forming for pavement. The moving formwork is supported by hydraulic jacks and remains intact until the entire structure is completed, allowing faster construction at lower cost compared to traditional formwork. Slip forming produces monolithic, jointless structures but requires careful planning of the construction process and a skilled workforce.
6 shotcrete
Shotcrete can be used to seal surfaces, preserve ground strength, support individual blocks, and form structural arches. It acts as a barrier to water movement and seals weak or expanding clays. By sealing surfaces and providing continuous support, shotcrete minimizes ground loosening and smoothes surface contours to preserve ground strength. It also acts as a simple bridge of support between individual blocks. Shotcrete thus provides various functions to stabilize underground structures through sealing, strengthening, and supporting excavated grounds and installed structures.
Experimental study of precast portal frame
This document describes an experimental study comparing the structural behavior of monolithic and precast concrete portal frames. Scaled models of a monolithic frame and two precast frames (one with a corbel connection and one without) were tested under a two-point load. Test results showed that the monolithic frame had the highest deflections but lowest load capacity, while the precast frame with a corbel connection had the lowest deflections but highest load capacity. Cracks were first observed in the monolithic frame, followed by the precast frame without a corbel, with the frame with a corbel cracking at the highest loads. In conclusion, the monolithic frame was found to be the most ductile but least stiff, while
Shotcrete technology
Shortcreting has proved to be the best method for construction of curved surfaces. Domes are now much easier to construct with the advent of shotcrete technology. Tunnel linings are also becoming easy with this technology. Not only are these but there a wide range of applications where this technology has been a leading one. This technical paper includes the concept of shotcrete and how it differs from conventional concrete. It also enumerates the different types of process involved in shotcreting i.e. dry mix process and wet mix process. Advantages of shotcrete and its applications in various fields like tunneling, canals, buildings etc. are specified in detail. This paper presents an overview of shotcreting technology along with its applications.
DEFINITION OF SHOTCRETE:-
Shotcrete is a mortar or high performance concrete conveyed through a hose and pneumatically projected at high velocity onto a backing surface. It is the force of this spraying action that leads to compaction of the concrete or mortar which then forms layers of concrete to the required thickness. Shotcreting has been an acceptable way of placing cementitious material in a variety of applications.
Usually patented polypropylene fibers are included in the shotcrete which increases the cohesive nature of the shotcrete through mechanically binding the cementitious materials together. This mechanism reduces the rebound waste that occurs through the shotcreting process and these fibers also resist plastic shrinkage and cracking through their ability to enhance the early stage tensile strength of concrete.
Shotcrete also gives better surface finishes and reduces surface tearing on non- linear sections. Cementitious material containing the poly propylene fibers resist cycles of freezing and thawing and also reduces the chances of water and chemical penetrations.
Ferro cement
This document discusses ferrocement, which is a reinforced concrete made of cement mortar and closely spaced steel mesh or rods. It describes the materials used including cement mortar mix, skeleton steel, and steel mesh reinforcement. It outlines the properties of ferrocement such as durability, strength, and flexibility. Finally, it covers the applications, advantages like cost effectiveness, and disadvantages of ferrocement.
prestressed concrete
Prestressed concrete is concrete that is placed under compression prior to service loads being applied through tensioning of steel tendons. This counteracts tensile stresses from loads to improve the performance of the concrete. Eugene Freyssinet is considered the father of prestressed concrete, developing techniques like high strength steel wires and conical wedges for post-tensioning in the 1930s-1940s. Prestressing can be through pre-tensioning or post-tensioning, depending on if the steel is tensioned before or after the concrete is cast. Popular post-tensioning systems include Freyssinet, Magnel Blaton, Gifford-Udall, and Lee-McCall methods. Prestressed concrete provides
Ferrocement
Ferrocement is a thin reinforced concrete made of cement mortar and wire mesh. It is strong, durable, and low-cost. Common applications include walls, floors, roofs, water tanks, bridges, and marine structures. Ferrocement is 2-5 cm thick and has a cement mortar mix reinforced with steel mesh or rods. It was invented in the 1850s and methods of construction include skeletal armature, closed mould, integral mould, and open mould. Ferrocement is used Residential buildings, marine applications, water and sanitation infrastructure, agriculture, renewable energy, and other structures.
Ferro cement
Ferrocement is a composite material made of cement, sand, water and wire mesh. It is thin and lightweight but has high tensile strength. Ferrocement elements are 2-3 cm thick with wire mesh reinforcement. It has applications in water tanks, boats, benches and roofs due to its strength, repair ability and moldability. It can be cast using various techniques like hand plastering, semi-mechanized process, centrifuging and guniting. Centrifuging and guniting provide better compaction for pressure pipes and prefabricated units.
Low cost residential building using locally available materials
The document discusses strategies for low-cost residential building using locally available materials. It proposes using locally sourced materials and construction techniques to reduce costs. Rat-trap bond brickwork, soil cement blocks, hollow concrete blocks, and filler slab roofing are presented as methods to lower expenses. The techniques aim to cut building material and labor costs by 25-40% compared to traditional construction, making housing more affordable.
Ferrocement
The document discusses ferrocement, which is a type of reinforced concrete using closely spaced layers of mesh or small rods encapsulated in mortar. Ferrocement consists of a cement mortar mix reinforced with steel mesh or fiber-reinforced polymer meshes and steel rods. It has several advantages over reinforced concrete including high strength, stiffness, impact resistance, and ability to withstand large deformations. Ferrocement can be used for applications such as tanks, floors, waterproofing, manhole covers, buildings, pipes, bridges, and strengthening existing concrete structures. It is applied using hand plastering, semi-mechanized processes, centrifuging, or guniting.
PPT ON SHOTCRETE TECHNOLGY BY MD AMANULLAH
Shotcrete, also known as sprayed concrete, is a concrete conveyed through a hose and pneumatically projected at high velocity onto a surface. It undergoes compaction during placement due to the force of projection. Shotcrete can be used on irregular surfaces like domes and tunnels and has advantages over conventional concrete like requiring little framework. The document discusses shotcrete materials, equipment, processes, applications and advantages/disadvantages versus conventional concrete. Common applications include tunnel linings, slope stabilization, and infrastructure rehabilitation.
Viewers also liked (20)
A study on the construction process (Precast concrete, In-situ cast concrete,...
A study on the construction process (Precast concrete, In-situ cast concrete,...
Environment friendly building_material_technologies_for_low_cost_housing
Environment friendly building_material_technologies_for_low_cost_housing
Pre-cast Concrete Panel Use in Freeway Rehabilitation
Pre-cast Concrete Panel Use in Freeway Rehabilitation
Low cost residential building using locally available materials
Low cost residential building using locally available materials
Recently uploaded
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Recently uploaded (20)
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
pre cast
- 1. BuildingConstructionvii Department of Architecture, Guru Nanak Dev University, Amritsar Pre-cast Concrete Construction Report V Submitted to: Ar. P.S. Mahoora Ar. Vishal Sood Submitted by: Gurkomal kaur kalyan (15) Priya Choudhary (23) B.Arch. 8th semester
- 2. Typical Floor Plan of 3BHK Apartments
- 4. Section XX’ (Detail A)
- 5. (Detail B)
- 6. (Detail B)
- 7. Section YY’ (Detail C)
- 8. (Detail D)
- 9. (Detail E)
- 10. Isometric View (Detail F)