Auto sand Option to generate sand

2. POWERSCREEN Track Mobile
Autosand Crusher Model 1000SR

3. POWERSCREEN
Autosand

4. POWERSCREEN 1000SR AUTOSAND Mobile Plant Estimated Operating
Cost
Considering Total Average Production for
-10mm in Basalt which Constitutes
{(0 to 5mm) & (5mm to 10 mm)}
a) (0 to 5mm) = 25
b) (5 to10mm) = 35 Tons/hr
Total ( a+b) i.e ( 0 to 10mm) 60 Tons/hr
Sr. no. Details Unit
1 Fuel Cost * 42.67 Rs/Ton
2
Maintenance cost such as Spares,Belt,
Lubricants, Grease, Filters etc. 10.00 Rs/Ton
3
Cost of Manpower ( Considering as Zero as
existing manpower will be utilised) 0 Rs./Ton
4 Engine Service Cost 4.0 Rs/Ton
5 Cost of Wear and Tear parts 4.50 Rs/ Ton
Total Operating Cost per Ton** 61.17 Rs/ Ton
Parameters considered:-
*Fuel cost considered - 80 Rs/Ltr
Avg Fuel consumption- 32 Ltr/ Hr
Average Liner Life In (0-10) MM considered 50000 Tons
Cost of Liners considered 225000 Rs
**Note :- Above factors vary for different site conditions .Calculations are only rough estimates, actual values may vary depending of
various factors

5. Advantages of Powerscreen 1000SR
Autosand Mobile Track Plant
• Catering to shortage of -5mm and -10mm by utilising over produced 40mm at
site.
• Ease of mobility to cater to different stock piles and different sites with ease.
• Savings over stationary setups with lower fuel consumption with in built engine
as compared to higher capacity gensets employed for stationary setups.
• Better quality of aggregate ( Better E&F Ratio).
• Less micro fines generation in re-crushing as compared to VSI ( Almost 5-7)%.
• Less operation cost for generation of aggregates (0-10)MM from 5-40 MM feed in
comparison to (-600)MM directly as Standalone model 1000SR caters easily to 5-
40 mm feed.

7. THANK YOU
www.powerscreen.com