Oilmax produces centrifugal oil cleaners for marine applications to remove fine particles from engine oil. Their oil cleaners can remove particles down to 1 micron in size, improving engine performance and life by reducing wear. They operate by spinning oil at high speeds to separate dirt via centrifugal force. Oilmax models are available for engine mounting or standalone use and can save customers money through extended oil change intervals and reduced maintenance costs compared to traditional oil filters.

1. Oilmax
CENTRIFUGAL OIL CLEANER
FOR MARINE APPLICATIONS
Use Your Oil Maximum
Oilmax Systems Pvt. Ltd.
Ashtavinayak Ind. Estate Narhe Dhayari
Road,Narhe,Pune-411 041 (INDIA)
Ph: +91 020 2543 1052/ 3250 1464
Visit us at: www.oilmaxsystems.com
1

2. Why Centrifugal Oil Cleaner?
Centrifugal Oil Cleaner
removes very fine dirt from
lube oil below 1µ . Present
engine filtration system can
not remove such fine
particles. With clean lube oil,
Engine wear & tear is
Substantially reduced,
particularly of the tight
clearance components like
Piston Rings and Liners,
Camshafts & Bearings, Turbo
Charger, Gear Train etc.
Effective removal of Carbon
soot prevents Ring sticking
and Clogging of oil passages,
improving engine
performance.
Fine particles in the range of 1-5 µ get trapped into the
dynamic clearance causing the maximum wear & tear.
Centrifugal oil cleaner removes these fine particles
enabling extension of component life
2

3. Advantages
 No Replacement Element
 No Recurring cost
 Increased Engine Life
 Improved Engine Operation
 Extended Oil Change Period
 Finest Filtration upto 1µ
 Reduce Storage / Disposal Coast of waste Oil
 Reduce Pollution & Environmental Impact
 Substantial Savings on Operating &
maintenance expenses…
Applications








Auxiliary Engines
Main Propulsion Engines
On Board Cranes
RTG Cranes
Reach Stackers
Stuffing Box Oil
Gear Box Oil
Hydraulic Oil
3

4. Working Principle
Centrifugal oil cleaner operates on reaction turbine
principle. Oil enters the centrifuge under pressure and
flows into rotor thru hollow rotor shaft. The oil
pressure and flow is converted in rotational energy as
oil escapes through Rotor jets, producing speed upto
8000 rpm. The resultant centrifugal force removes dirt
from engine oil , depositing it on the inner wall of
rotor in a dense cake form. Clean oil drains back to
the engine oil by gravity.
4

5. Engine Wear Reduction by installing
Centrifugal Oil Cleaner
5

6. Selection Chart
(Engine Mounted Centrifuge)
Centrifuge
Model
Nominal
Flow Rate
Dirt
Holding
Capacity
SCC 020
200 LPH
200 cc
20 Ltr.
SCC 025
250 LPH
250 cc
30 Ltr.
SCC 050
500 LPH
500 cc
60 Ltr.
SCC 060
600 LPH
600 cc
80 Ltr.
SCC 100
700 LPH
1000 cc
120 Ltr.
SCC 200
1200 LPH
2000 cc
700 Ltr.
SCC 400
3000 LPH
4000 cc
2000 Ltr
SCC 600
4000 LPH
6000 cc.
3000 Ltr.
Suitable for Engine
Oil Sump Capacity
6

7. Installation Kit – SCC 200
7

8. Assembly Drawing
Standalone System ( With Motor Pump)
8

9. 9

10. Engine Mounted Centrifuge
Standalone System
(With Motor & Pump)
Sludge Collected
In Rotor
10

11. Installations
Engine
Mounted Unit
Standalone Unit
(With Motor& Pump)
11

12. Installations
DAIHATSU 5 DK 20
STX MAN B&W 5L 16/24
MAN B&W 7 L 23/30
YANMAR M 200L SN
12

13. Installations
Daihatsu 5DK-20 A/E
MAN B&W 8L23/30
MAK 6 M 25 C
13

14. THIS ANALYSIS IS JUST FOR REFERENCE;VALUES MAY CHANGE FOR DIFFERENT ENGINES AND PARAMETERS.
Sample Saving Analysis
-
Oilmax Centrifugal Oil Cleaner
Engine Model
: MAN B & W 6L23/30 800 KW DG SET
Engine Oil Capacity
: 700 Liters
Cost of Lube Oil
: 05 USD per Litre
Cost of Full flow Filter Element : 50 USD
Engine running per year
: 6000 Hrs.
A)
Saving on Cost of Fullflow Filter Element Replacement (Cartridge Type)
Engine without
Engine with Centrifugal
Centrifugal
Oil
Oil Cleaner
Cleaner
1) Full flow Filter Change Period
500
1000
2) No. of elements changed per
6000 / 500 x 2 = 24
6000/1000 x 2 =12
year
3) Cost of element replacement per
24 x 50 =1200 USD
12 X 50 =600 USD
year
Saving per year : 600 USD
B)
Saving on Account of Extended Oil Change Period
Engine without
Engine with Centrifugal
Centrifugal
Oil
Oil Cleaner
Cleaner
1) Oil change period
1500 Hrs.
2000 Hrs.
2) No. of oil changes
6000/1500 =04
6000/2000 =03
3) Total oil changed
700 X 4 =2800 Ltrs
700 x 3 =2100 Ltrs.
4) Cost of oil change
2800 x 5 =14000 USD
2100 X 5 =10500 USD
Saving per year : 3500 USD
C)
Saving on Account of Reduced Wear & Tear
Overhaul period (MTBO)
: 12,000 Hrs. (2 years)
Overhauling cost (of wear parts)
: 12000 USD
Overhauling cost per year
: 12000/2 =6000 USD
Overhauling cost per year (at 25% reduction in wear rate) : 12000/2.5 = 4800 USD
Saving per year : 1200 USD
TOTAL SAVING PER YEAR = A+B+C
: 5300 USD
OUR CENTRIFUGE MODEL COST
: 1500 USD
PAYBACK PERIOD
:
04 MONTHS
14

15. Our Valued Customers
Fleet
Management
Ltd.
ASP Ship
Anglo
 V Ships
Eastern
Wallem
Mgmt.
 Executive
Ship Mgmt
SCF Unicom Navig8 Ship
Masterbulk
Wilhelmsen
Univan
Carisbrooke
Shipping Ltd
Chemikalien
Mgmt.
Thome Ship
Mgmt.
MTM Ship
Mgmt.
 Maersk
Tankers
Sea Transport
Gearbulk
15

16. Our Valued Customers
B S Ship Mgmt
Seaspan Ship
Management
Synergy Maritime
Target Ship Mgmt.
Odfjell Ship Mgmt.
Berge Bulk
Shipping Corporation
Of India Ltd.
British Marine
Mercator Ltd.
Norbulk Shipping
MSI Ship Mgmt.
India Steamship
Goodwood Ship Mgmt
16