IEEE 2015-15 Power Electronics and Power System Project titles for ME and BE Students,Bangalore.power electronics and power system projects in bangalore.
Now day’s the power factor has become a major problem in power system to improve the power quality of the grid, as power factor is affected on the grid due to the nonlinear loads connected to it. Single phase bridgeless AC/DC power factor correction (PFC) topology to improve the power factor as well as the total harmonic distortion (THD) of the utility grid is proposed. By removing the input bridge in conventional PFC converters, the control circuit is simplified; the total harmonics distortion (THD) and power factor (PF) are improved. The PI controller operates in two loops one is the outer control loop which calculates the reference current through LC filter and signal processing. Inner current loop generates PWM switching signals through the PI controller. The output of the proposed PFC topology is verified for prototype using MATLAB circuit simulations. The experimental system is developed, and the simulation results are obtained.
IMPLEMENTATION OF DISCONTINUOUS INDUCTOR CURRENT MODE IN CUK CONVERTERS FED B...Journal For Research
This paper presents a bridgeless Cuk converter-fed brushless DC (BLDC) motor drive. A Bridgeless Cuk converter is constructed to operate at discontinuous inductor current mode to improve the quality of power and power factor at the AC mains for better speed control. The bridgeless converter is designed for obtaining the low conduction losses and requirement of low size of heat sink for the switches. TI-TMS320-F2812-based Digital Signal Processor (DSP) is used for the development of the hardware prototype of proposed BLDC motor drive.
AN ACTIVE PFC WITH FLYBACK DESIGN FOR INTELLIGENCE IN STREET LIGHT APPLICATIONJournal For Research
As the requirement of energy demand is increasing due to rapid industrial development, it is necessary to meet the growing demand of energy. This can be achieved in two ways: find alternate resource to supply power or energy; or reduce the energy consumption of present resources available. The proposed work is basically the design and implementation of an intelligent street light of 50 W power output from the offline converter by using power LED. As power LED draws huge non sinusoidal current due to the presence of AC-DC converter, a Boost PFC and a fly back converter is used for better power factor and for dc voltage regulation. Along with this a PIR sensor and LDR sensors are also used. A PIC microcontroller is used for PWM dimming. This makes to reduce the power consumption in street light especially in urban cities in which most of the power is wasted in lighting streets during late night.
A Low Cost Single-Switch Bridgeless Boost PFC ConverterIJPEDS-IAES
This paper proposes the single-switch bridgeless boost power factor correction (PFC) converter to achieve high efficiency in low cost. The proposed converter utilizes only one active switching device forPFC operation as well as expecting higher efficiency than typical boost PFC converters. On the other hand, the implementation cost is less than traditional bridgeless boost PFC converters, in where two active switching deivces are necessary. The operational principle, the modeling, and the control scheme of the proposed converter arediscussed in detail. In order to verify the operation of the proposed converter, a 500W switching model is built in PSIM software package. The simulation results show that the proposed converter perfectly achieves PFC operation with only a single active switch.
Now day’s the power factor has become a major problem in power system to improve the power quality of the grid, as power factor is affected on the grid due to the nonlinear loads connected to it. Single phase bridgeless AC/DC power factor correction (PFC) topology to improve the power factor as well as the total harmonic distortion (THD) of the utility grid is proposed. By removing the input bridge in conventional PFC converters, the control circuit is simplified; the total harmonics distortion (THD) and power factor (PF) are improved. The PI controller operates in two loops one is the outer control loop which calculates the reference current through LC filter and signal processing. Inner current loop generates PWM switching signals through the PI controller. The output of the proposed PFC topology is verified for prototype using MATLAB circuit simulations. The experimental system is developed, and the simulation results are obtained.
IMPLEMENTATION OF DISCONTINUOUS INDUCTOR CURRENT MODE IN CUK CONVERTERS FED B...Journal For Research
This paper presents a bridgeless Cuk converter-fed brushless DC (BLDC) motor drive. A Bridgeless Cuk converter is constructed to operate at discontinuous inductor current mode to improve the quality of power and power factor at the AC mains for better speed control. The bridgeless converter is designed for obtaining the low conduction losses and requirement of low size of heat sink for the switches. TI-TMS320-F2812-based Digital Signal Processor (DSP) is used for the development of the hardware prototype of proposed BLDC motor drive.
AN ACTIVE PFC WITH FLYBACK DESIGN FOR INTELLIGENCE IN STREET LIGHT APPLICATIONJournal For Research
As the requirement of energy demand is increasing due to rapid industrial development, it is necessary to meet the growing demand of energy. This can be achieved in two ways: find alternate resource to supply power or energy; or reduce the energy consumption of present resources available. The proposed work is basically the design and implementation of an intelligent street light of 50 W power output from the offline converter by using power LED. As power LED draws huge non sinusoidal current due to the presence of AC-DC converter, a Boost PFC and a fly back converter is used for better power factor and for dc voltage regulation. Along with this a PIR sensor and LDR sensors are also used. A PIC microcontroller is used for PWM dimming. This makes to reduce the power consumption in street light especially in urban cities in which most of the power is wasted in lighting streets during late night.
A Low Cost Single-Switch Bridgeless Boost PFC ConverterIJPEDS-IAES
This paper proposes the single-switch bridgeless boost power factor correction (PFC) converter to achieve high efficiency in low cost. The proposed converter utilizes only one active switching device forPFC operation as well as expecting higher efficiency than typical boost PFC converters. On the other hand, the implementation cost is less than traditional bridgeless boost PFC converters, in where two active switching deivces are necessary. The operational principle, the modeling, and the control scheme of the proposed converter arediscussed in detail. In order to verify the operation of the proposed converter, a 500W switching model is built in PSIM software package. The simulation results show that the proposed converter perfectly achieves PFC operation with only a single active switch.
Review of Integrated Power Factor Correction (PFC) Boost converter topologies...IJARBEST JOURNAL
This paper provides a review of various Power Factor Correction (PFC) boost
converter topologies suitable for telecoms. A novel integrated PFC topology is proposed which acts
as a backup power supply for telecommunication systems. The advantage of the proposed circuit is
that it operates based on soft switching principle thereby reducing the switching losses in the
converter. The topologies analyzed in this paper are conventional average current mode control
boost PFC, bridgeless boost PFC, semi-bridgeless boost PFC, totem-pole bridgeless boost PFC and
proposed integrated boost PFC. All these topology studies are investigated by carrying out the
simulation of the converter circuits using PSIM software. A detailed comparison of all the
topologies have been done and they are compared in terms of supply power factor, supply current
THD and displacement factor. From the results, it is inferred that the proposed integrated PFC
provides a reduced supply current THD and improved power factor. The results are validated.
Comprehensive Study of Single-Phase AC-DC Power Factor Corrected Converters w...Asoka Technologies
Solid-state switch mode AC-DC converters having high-frequency transformer isolation are developed in buck, boost, and buck-boost configurations with improved power quality in terms of reduced total harmonic distortion (THD) of input current, power-factor correction (PFC) at AC mains and precisely regulated and isolated DC output voltage feeding to loads from few Watts to several kW. This paper presents a comprehensive study on state of art of power factor corrected single-phase AC-DC converters configurations, control strategies, selection of components and design considerations, performance evaluation, power quality considerations, selection criteria and potential applications, latest trends, and future developments. Simulation results as well as comparative performance are presented and discussed for most of the proposed topologies.
Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed.
A three level quasi-two-stage single-phase pfc converter with flexible output...LeMeniz Infotech
A three level quasi-two-stage single-phase pfc converter with flexible output voltage and improved conversion efficiency
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Three Phase Single Stage Isolated Cuk based PFC ConverterAsoka Technologies
In this paper, analysis and design of a three phase isolated Cuk based power factor correction (PFC) converter has been proposed. The proposed converter is operated in discontinuous output inductor current mode (DOICM) to achieve PFC at ac input. This avoids the inner current control loop which further eliminates the sensing of current. This makes the system more reliable and robust. The converter requires only one simple voltage control loop for output voltage regulation and all the power switches are driven by the same gate signal which simplifies the gate driver circuit. The detailed operation of the converter and design calculations are presented. And also a small signal model of the converter by using CIECE approach is presented to aid the controller design. The experimental results from a 2-kW laboratory prototype with 208-V line-to-line input voltage, 400-V output voltage are presented to confirm the operation of the proposed converter. An input power factor of 0.999, an input current total harmonic distortion of as low as 4.06% and a high conversion efficiency of 95.1% are achieved from laboratory prototype.
Analysis and design of single switch forward-flyback two-channel led driver w...LeMeniz Infotech
Analysis and design of single switch forward-flyback two-channel led driver with resonant-blocking capacitor
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Prof. Cuk invited talk at APEC 2011 plenary session to celebrate
35 years of his creation of this modeling and analysis method.
This talk was also recorded on video by IEEE.tv and can be viewed together. Here is a link to that video.
https://youtu.be/BLx57J2fF5w
Note: first few minutes of the video is Prof. Cuk's interview made after his presentation. This is thern followed by full 25 minutes presentation, which can be followed by the enclosed 67 slides.
A unity power factor bridgeless isolated cuk converter fed brushless dc motor...LeMeniz Infotech
A unity power factor bridgeless isolated cuk converter fed brushless dc motor drive
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Improvement In Pre-Regulation For Power Factor Using CUK ConverterIJRES Journal
Cuk converters, operating in Discontinuous Capacitor Voltage Mode can achieve unity power factor when used as rectifiers with no need of duty-cycle modulation. This operating mode causes high voltage stresses across the semiconductors, calling for high-voltage switches like IGBT's. However, zero-voltage turn-off is achieved, resulting in limited power loss even at high frequency. Both current- and voltage-fed approaches as well as constant- and variable-frequency control are analyzed in the paper. Simulation and experimental results are Explained, which demonstrate actual converter performance. Most of the power factor regulator topologies in continuous conduction mode result in bulky magnetic, and in discontinuous conduction mode result in high harmonic content. To solve these problems a Cuk topology is presented in discontinuous conduction mode with coupled inductors for power factor regulation, the unique feature exhibited by the converter that makes the converter better than the other converter in operation for power factor regulation. Inductive coupling is used to transfer the ripple from the input to the output side thereby reducing the switching harmonics in the line current. Experimental results obtained on a some Watt prototype are also presented.
A Novel Approach of Position Estimation and Power Factor Corrector Converter ...IJPEDS-IAES
This paper proposes a Power factor Corrected (PFC) Bridgeless Buck-Boost converter fed BLDC motor drive. The Bridgeless configuration eliminates the Diode Bridge Rectifier in order to reduce the number of components and the conduction loss. The position sensors used in BLDC drives have drawbacks of additional cost, mechanical alignment problems. These bottle necks results in sensorless technique. The Sensorless technique mostly relies on measurement of Back EMF to determine relative positions of stator and rotor for the correct coil energising sequence can be implemented. This paper introduces the offline Finite Element method for sensorless operation. The proposed sensorless scheme estimates the motor position at standstill and running condition. The obtained Power Factor is within the acceptable limits IEC 61000-3-2. The proposed drive is simulated in MATLAB/Simulink the obtained results are validated experimentally on a developed prototype of the drive.
Design of an Integrated Power Factor Converter with PI Controller for Low Pow...IOSRJEEE
In this paper, an integrated power factor converter with PI controller is proposed. The circuit topology is obtained by integrating two converters namely the buck converter and a boost converter. The boost converter is normally a step up converter which obtain an unity power factor and performs low harmonics at the input. Based on the simple circuit topology and easy control the boost converter or buck-boost converter is used as power factor correctors. Similarly the buck converter regulates the dc-link voltage and provide a stable dc output voltage. To achieve unity power factor, the output voltage of both converter should be higher than the amplitude of the ac line voltage. The steady -state analysis is developed and a design is provided
New Topology for Transformer less Single Stage -Single Switch AC/DC ConverterIJMER
This paper presents a transformer less single-stage single-switch ac/dc converter suitable for universal line applications (90–270 Vrms). The topology consists of a buck-type power-factor correction (PFC) cell with a buck–boost dc/dc cell and part of the input power is directly coupled to the output after the first power processing. With this direct power transfer and sharing capacitor voltages, the converter is able to achieve efficient power conversion, high power factor, low voltage stress on intermediate bus (less than 120 V) and low output voltage without a high step-down transformer. The absence of transformer reduces the size of the circuit , component counts and cost of the converter. Unlike most of the boost-type PFC cell, the main switch of the proposed converter only handles the peak inductor current of dc/dc cell rather than the superposition of both inductor currents. Tight voltage regulation is provided by using PID controller. Detailed analysis and design procedures and simulation of the proposed circuit are given .
Asoka Technologies offer latest IEEE Electrical projects for BTech and MTech. We have many projects and we do provide abstract, paper explanation, simulink model explanation and exact results within time.
We do develop your own ideas also.
Best EEE projects for Electrical engineering final year students, Electrical projects ideas for final year EEE, ECE, EIE students. For more projects check my blog : http://microcontrollerslab.com/electrical-projects-ideas/
Review of Integrated Power Factor Correction (PFC) Boost converter topologies...IJARBEST JOURNAL
This paper provides a review of various Power Factor Correction (PFC) boost
converter topologies suitable for telecoms. A novel integrated PFC topology is proposed which acts
as a backup power supply for telecommunication systems. The advantage of the proposed circuit is
that it operates based on soft switching principle thereby reducing the switching losses in the
converter. The topologies analyzed in this paper are conventional average current mode control
boost PFC, bridgeless boost PFC, semi-bridgeless boost PFC, totem-pole bridgeless boost PFC and
proposed integrated boost PFC. All these topology studies are investigated by carrying out the
simulation of the converter circuits using PSIM software. A detailed comparison of all the
topologies have been done and they are compared in terms of supply power factor, supply current
THD and displacement factor. From the results, it is inferred that the proposed integrated PFC
provides a reduced supply current THD and improved power factor. The results are validated.
Comprehensive Study of Single-Phase AC-DC Power Factor Corrected Converters w...Asoka Technologies
Solid-state switch mode AC-DC converters having high-frequency transformer isolation are developed in buck, boost, and buck-boost configurations with improved power quality in terms of reduced total harmonic distortion (THD) of input current, power-factor correction (PFC) at AC mains and precisely regulated and isolated DC output voltage feeding to loads from few Watts to several kW. This paper presents a comprehensive study on state of art of power factor corrected single-phase AC-DC converters configurations, control strategies, selection of components and design considerations, performance evaluation, power quality considerations, selection criteria and potential applications, latest trends, and future developments. Simulation results as well as comparative performance are presented and discussed for most of the proposed topologies.
Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed.
A three level quasi-two-stage single-phase pfc converter with flexible output...LeMeniz Infotech
A three level quasi-two-stage single-phase pfc converter with flexible output voltage and improved conversion efficiency
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Three Phase Single Stage Isolated Cuk based PFC ConverterAsoka Technologies
In this paper, analysis and design of a three phase isolated Cuk based power factor correction (PFC) converter has been proposed. The proposed converter is operated in discontinuous output inductor current mode (DOICM) to achieve PFC at ac input. This avoids the inner current control loop which further eliminates the sensing of current. This makes the system more reliable and robust. The converter requires only one simple voltage control loop for output voltage regulation and all the power switches are driven by the same gate signal which simplifies the gate driver circuit. The detailed operation of the converter and design calculations are presented. And also a small signal model of the converter by using CIECE approach is presented to aid the controller design. The experimental results from a 2-kW laboratory prototype with 208-V line-to-line input voltage, 400-V output voltage are presented to confirm the operation of the proposed converter. An input power factor of 0.999, an input current total harmonic distortion of as low as 4.06% and a high conversion efficiency of 95.1% are achieved from laboratory prototype.
Analysis and design of single switch forward-flyback two-channel led driver w...LeMeniz Infotech
Analysis and design of single switch forward-flyback two-channel led driver with resonant-blocking capacitor
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Prof. Cuk invited talk at APEC 2011 plenary session to celebrate
35 years of his creation of this modeling and analysis method.
This talk was also recorded on video by IEEE.tv and can be viewed together. Here is a link to that video.
https://youtu.be/BLx57J2fF5w
Note: first few minutes of the video is Prof. Cuk's interview made after his presentation. This is thern followed by full 25 minutes presentation, which can be followed by the enclosed 67 slides.
A unity power factor bridgeless isolated cuk converter fed brushless dc motor...LeMeniz Infotech
A unity power factor bridgeless isolated cuk converter fed brushless dc motor drive
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Improvement In Pre-Regulation For Power Factor Using CUK ConverterIJRES Journal
Cuk converters, operating in Discontinuous Capacitor Voltage Mode can achieve unity power factor when used as rectifiers with no need of duty-cycle modulation. This operating mode causes high voltage stresses across the semiconductors, calling for high-voltage switches like IGBT's. However, zero-voltage turn-off is achieved, resulting in limited power loss even at high frequency. Both current- and voltage-fed approaches as well as constant- and variable-frequency control are analyzed in the paper. Simulation and experimental results are Explained, which demonstrate actual converter performance. Most of the power factor regulator topologies in continuous conduction mode result in bulky magnetic, and in discontinuous conduction mode result in high harmonic content. To solve these problems a Cuk topology is presented in discontinuous conduction mode with coupled inductors for power factor regulation, the unique feature exhibited by the converter that makes the converter better than the other converter in operation for power factor regulation. Inductive coupling is used to transfer the ripple from the input to the output side thereby reducing the switching harmonics in the line current. Experimental results obtained on a some Watt prototype are also presented.
A Novel Approach of Position Estimation and Power Factor Corrector Converter ...IJPEDS-IAES
This paper proposes a Power factor Corrected (PFC) Bridgeless Buck-Boost converter fed BLDC motor drive. The Bridgeless configuration eliminates the Diode Bridge Rectifier in order to reduce the number of components and the conduction loss. The position sensors used in BLDC drives have drawbacks of additional cost, mechanical alignment problems. These bottle necks results in sensorless technique. The Sensorless technique mostly relies on measurement of Back EMF to determine relative positions of stator and rotor for the correct coil energising sequence can be implemented. This paper introduces the offline Finite Element method for sensorless operation. The proposed sensorless scheme estimates the motor position at standstill and running condition. The obtained Power Factor is within the acceptable limits IEC 61000-3-2. The proposed drive is simulated in MATLAB/Simulink the obtained results are validated experimentally on a developed prototype of the drive.
Design of an Integrated Power Factor Converter with PI Controller for Low Pow...IOSRJEEE
In this paper, an integrated power factor converter with PI controller is proposed. The circuit topology is obtained by integrating two converters namely the buck converter and a boost converter. The boost converter is normally a step up converter which obtain an unity power factor and performs low harmonics at the input. Based on the simple circuit topology and easy control the boost converter or buck-boost converter is used as power factor correctors. Similarly the buck converter regulates the dc-link voltage and provide a stable dc output voltage. To achieve unity power factor, the output voltage of both converter should be higher than the amplitude of the ac line voltage. The steady -state analysis is developed and a design is provided
New Topology for Transformer less Single Stage -Single Switch AC/DC ConverterIJMER
This paper presents a transformer less single-stage single-switch ac/dc converter suitable for universal line applications (90–270 Vrms). The topology consists of a buck-type power-factor correction (PFC) cell with a buck–boost dc/dc cell and part of the input power is directly coupled to the output after the first power processing. With this direct power transfer and sharing capacitor voltages, the converter is able to achieve efficient power conversion, high power factor, low voltage stress on intermediate bus (less than 120 V) and low output voltage without a high step-down transformer. The absence of transformer reduces the size of the circuit , component counts and cost of the converter. Unlike most of the boost-type PFC cell, the main switch of the proposed converter only handles the peak inductor current of dc/dc cell rather than the superposition of both inductor currents. Tight voltage regulation is provided by using PID controller. Detailed analysis and design procedures and simulation of the proposed circuit are given .
Asoka Technologies offer latest IEEE Electrical projects for BTech and MTech. We have many projects and we do provide abstract, paper explanation, simulink model explanation and exact results within time.
We do develop your own ideas also.
Best EEE projects for Electrical engineering final year students, Electrical projects ideas for final year EEE, ECE, EIE students. For more projects check my blog : http://microcontrollerslab.com/electrical-projects-ideas/
We Offer M-Tech/M.E,B- Tech/BE,Diploma,engineering and MS Mini and Major projects IEEE projects , final year projects , academic projects, live projects For ECE, EEE, CSE, IT, Mechanical and Civil. Domains Like Embedded Systems( Arduino based, ARM based, raspberry pi based, Internet Of Things (IOT) Based and microcontroller based), VLSI, Image Processing, DIP/DSP, Power Systems, Power Electronics, AUTOCAD, CATIA, Structural Engineering Projects, Transportation Engineering, Geo-Technical Engineering, Construction Technology, Environmental Engineering, aeronautical engineering projects, agricultural engineering projects, ANDROID, JAVA, PHP, CLOUD COMPUTING, C, C++ Language Programming Classes, .NET. BBA Projects for Finance, Marketing and HR ,MBA Projects for Finance, Marketing and HR. MHM Projects,M.com Projects,Msc Projects,B.sc (Bsc) Projects , school science fair projects/ science fair projects for high school,M-Tech/ME and MBA project documentation/project report/project base paper plagiarism checking and Improvement, paper writing and international journal paper publication services for all branches. Internship for MBA Finance, Marketing and HR students. seminar topics for ece,eee,cse/IT,mechanical,civil,We Providing Industrial Training for B- tech/Diploma/Polytechnic Students.MCA/BSC Projects. B-Tech/BE/Diploma Tuitions for ECE, EEE, CSE, IT, MECHANICAL, CIVIL. 10th tuition and inter MPC 1st year and 2nd year tuition, Class XI – XII Tuitions, Projects Training we deal. National Institute Of Technical Service Center NITSC, Dilsukhnagar, chaitanyapuri, kothapet, Hyderabad, Telangana.
NITSC is one of the foremost Engineering, Project Management, Reliability and Mission Assurance as well as Guidance in Academic Projects. We differentiate ourselves from our competition by integrating unique-leading quantitative risk management methodologies into every project to provide superior-quality products and services on time and within budget. NITSC focuses on solving industries most complex technical challenges and other creative knowledge from various top-notch teams of engineers, professional Tutors to make academic projects much easy.
Ieee 2015 16 ped titles for me-mtech @triple n infotec-trichysubhu8430
Triple N Infotech Provides Project Support to Students of all departments in the field of EMBEDDED SYSTEM, DIP, VLSI, NS2, JAVA, DOTNET, POWER ELECTRONICS, POWER SYSTEM and much more technologies. This project Assistance would help enhance the student knowledge in the appropriate field, thus making them more adapt to the current market scenario.
TRIPLE N INFOTECH
73/5,3rd FLOOR,SRI KAMATCHI COMPLEX
OPP.CITY HOSPITAL (NEAR LAKSHMI COMPLEX)
SALAI ROAD,Trichy - 620 018,
Ph: 0431 4050403, 7200021404.
Ieee 2015 16 ped titles for me-mtech @triple n infotec-trichysubhu8430
Triple N Infotech Provides Project Support to Students of all departments in the field of EMBEDDED SYSTEM, DIP, VLSI, NS2, JAVA, DOTNET, POWER ELECTRONICS, POWER SYSTEM and much more technologies. This project Assistance would help enhance the student knowledge in the appropriate field, thus making them more adapt to the current market scenario.
TRIPLE N INFOTECH
73/5,3rd FLOOR,SRI KAMATCHI COMPLEX
OPP.CITY HOSPITAL (NEAR LAKSHMI COMPLEX)
SALAI ROAD,Trichy - 620 018,
Ph: 0431 4050403, 7200021404.
Ieee 2015 16 ped titles for me-mtech @triple n infotec-trichysubhu8430
Triple N Infotech Provides Project Support to Students of all departments in the field of EMBEDDED SYSTEM, DIP, VLSI, NS2, JAVA, DOTNET, POWER ELECTRONICS, POWER SYSTEM and much more technologies. This project Assistance would help enhance the student knowledge in the appropriate field, thus making them more adapt to the current market scenario.
TRIPLE N INFOTECH
73/5,3rd FLOOR,SRI KAMATCHI COMPLEX
OPP.CITY HOSPITAL (NEAR LAKSHMI COMPLEX)
SALAI ROAD,Trichy - 620 018,
Ph: 0431 4050403, 7200021404.
Ieee 2015 16 ped titles for me-mtech @triple n infotec-trichysubhu8430
Triple N Infotech Provides Project Support to Students of all departments in the field of EMBEDDED SYSTEM, DIP, VLSI, NS2, JAVA, DOTNET, POWER ELECTRONICS, POWER SYSTEM and much more technologies. This project Assistance would help enhance the student knowledge in the appropriate field, thus making them more adapt to the current market scenario.
TRIPLE N INFOTECH
73/5,3rd FLOOR,SRI KAMATCHI COMPLEX
OPP.CITY HOSPITAL (NEAR LAKSHMI COMPLEX)
SALAI ROAD,Trichy - 620 018,
Ph: 0431 4050403, 7200021404.
IEEE 2015 Matlab projects,ME Matlab projects bangalore,BE Matlab projects,ME Final year MATLAB Projects,BE Final year MATLAB Projects,IEEE 2015 BE MATLAB projects bangalore,IEEE 2015 BE MATLAB projects bangalore,IEEE 2015 ME MATLAB projects bangalore
Greetings from IGeekS Technologies ….
We were humbled to receive your enquiry regarding your academic project. We assure you to give all kinds of guidance for you to successfully complete your project.
IGeekS Technologies is a company located in Bangalore, India. We have being recognized as a quality provider of hardware and software solutions for the student’s in order carry out their academic Projects. We offer academic projects at various academic levels ranging from graduates to masters (Diploma, BCA, BE, M. Tech, MCA, M. Sc (CS/IT)). As a part of the development training, we offer Projects in Embedded Systems & Software to the Engineering College students in all major disciplines.
Academic Projects
As a part of our vision to provide a field experience to young graduates, we offering academic projects to MCA/B.Tech/BE/M.Tech/BCA students. Normally our way of project guidance will start with in-depth training. Why because unless and until a student know the technology, he cannot implement a project. We designed such courses based on industry requirements.
Placements
Our support never ends with training. We are maintaining a dedicated consulting division with 5 HR executives to assist our students to find good opportunities. Once a student finishes his course and project, immediately we will collect their profiles and will contact with the companies. Since January 2010, more than 450 students got placed with the help of our quality training, project assistance and placement support.
Facilities
• Project confirmation and completion certificate.
• Project base paper, synopsis and PPT.
• In-depth training by industry experts
• Project guidance from experienced people
• Regular seminars and group discussions
• Lab facility
• Good placement assistance
• A CD which contains all the required softwares and materials.
• Lab modules with 100s of examples to improve students programming skills.
Please visit our websites for further information:-
www.makefinalyearproject.com
www.igeekstechnoloiges.com
We look forward to have you in our office for a detailed technical discussion for in-depth understanding of the base paper and synopsis. Our training methodology includes to first prepare the candidates to the relevant technology used in the selected project and then start the project implementation; this gives the candidate the pre-requisite knowledge to understand not only the project but also the code in which the project is implemented.The program concludes by issuing of project completion certificate from our organization.
We attached the proposed project titles for the academic year 2015. Find the attachment. Select the titles we will send the synopsis and base paper...If have any own topic (base paper) pls send us.we will check and confirm the implementation.
We will explain the base paper and synopsis, for technical discussion or admission contact Mr. Nandu-9590544567.
Greetings from IGeekS Technologies ….
We were humbled to receive your enquiry regarding your academic project. We assure you to give all kinds of guidance for you to successfully complete your project.
IGeekS Technologies is a company located in Bangalore, India. We have being recognized as a quality provider of hardware and software solutions for the student’s in order carry out their academic Projects. We offer academic projects at various academic levels ranging from graduates to masters (Diploma, BCA, BE, M. Tech, MCA, M. Sc (CS/IT)). As a part of the development training, we offer Projects in Embedded Systems & Software to the Engineering College students in all major disciplines.
Academic Projects
As a part of our vision to provide a field experience to young graduates, we offering academic projects to MCA/B.Tech/BE/M.Tech/BCA students. Normally our way of project guidance will start with in-depth training. Why because unless and until a student know the technology, he cannot implement a project. We designed such courses based on industry requirements.
Placements
Our support never ends with training. We are maintaining a dedicated consulting division with 5 HR executives to assist our students to find good opportunities. Once a student finishes his course and project, immediately we will collect their profiles and will contact with the companies. Since January 2010, more than 450 students got placed with the help of our quality training, project assistance and placement support.
Facilities
• Project confirmation and completion certificate.
• Project base paper, synopsis and PPT.
• In-depth training by industry experts
• Project guidance from experienced people
• Regular seminars and group discussions
• Lab facility
• Good placement assistance
• A CD which contains all the required softwares and materials.
• Lab modules with 100s of examples to improve students programming skills.
Please visit our websites for further information:-
www.makefinalyearproject.com
www.igeekstechnoloiges.com
We look forward to have you in our office for a detailed technical discussion for in-depth understanding of the base paper and synopsis. Our training methodology includes to first prepare the candidates to the relevant technology used in the selected project and then start the project implementation; this gives the candidate the pre-requisite knowledge to understand not only the project but also the code in which the project is implemented.The program concludes by issuing of project completion certificate from our organization.
We attached the proposed project titles for the academic year 2015. Find the attachment. Select the titles we will send the synopsis and base paper...If have any own topic (base paper) pls send us.we will check and confirm the implementation.
We will explain the base paper and synopsis, for technical discussion or admission contact Mr. Nandu-9590544567.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
1. POWER ELECTRONICS & POWER SYSTEM TITLES 2015-2016
Power drives :
1. Current Limit Strategy for BLDC Motor Drive with Minimized DC-Link Capacitor
2. A Torque Ripple Compensation Technique for a Low Cost Brushless DCMotor Drive
3. Position Sensorless Control without Phase Shifter for High-speed BLDCMotors with
Low Inductance and Nonideal Back EMF
4. Angular Modulation of Dual-VSI Fed Open-End Motor for Electrical Vehicle
Applications
5. Performance Analysis of Linear Induction Motor of Electromagnetic Catapult
6. Advanced Integrated Modeling and Analysis for Adjustable Speed Drives
ofInduction Motors Operating With Minimum Losses
7. A New Formulation of Reactive Power Based Model Reference Adaptive System for
Sensorless Induction Motor Drive
8. Simple Flux Regulation for Improving State Estimation at Very Low and Zero Speed
of a Speed Sensorless Direct Torque Control of InductionMotor Drive
SOLAR MPPT SYSTEM:
1. Direct MPPT algorithm for PV sources with only voltage measurements
2. P-Q and P-V Control of Photovoltaic Generators in Distribution Systems
3. Real-Time HIL Implementation of Sliding Mode Control for Standalone System
Based on PV Array Without Using Dumpload
4. Energy Storage System from DC Bus with Port for Solar Module
5. A Novel Control Strategy for Stand-alone Solar PV Systems with Enhanced Battery
Life
6. A New Low-Cost Centralized MPPT Controller System for Multiply Distributed
Photovoltaic Power Conditioning Modules
7. An Optimal Maximum Power Point Tracking Algorithm for PV Systems With
Climatic Parameters Estimation
2. POWER ELECTRONICS & POWER SYSTEM TITLES 2015-2016
Z-Network based projects:
1. An Energy Stored Quasi-Z Source Cascade Multilevel Inverter based Photovoltaic
Power Generation System
2. An AC Z-source Converter Based on Gamma Structure with Safe-Commutation
Strategy
3. A Comparison between Single-Phase Quasi-Z-Source and Quasi-Switched-Boost
Inverters
4. A Single-phase PV Quasi-Z-source Inverter with Reduced Capacitance using
Modified Modulation and Double-Frequency Ripple Suppression Control
5. Switched-Coupled-Inductor Quasi-Z-Source Inverter
6. A Novel Quasi-Z-Source Inverter Topology With Special Coupled Inductors For
Input Current Ripples Cancellation.
POWER QUALITY AND HARMONICS FILTERINGS:
1. A PLL-Less Scheme for Single-Phase Grid Interfaced Load Compensating Solar PV
Generation System
2. A Filtering Scheme to Reduce the Penetration of Harmonics Into Transmission
Systems
3. Detection of Grid Voltage Fundamental and Harmonic Components Using
Kalman Filter and Generalized Averaging Method
4. A Single-Phase Active Device for Power Quality Improvement of Electrified
Transportation
5. Control of Single-Phase Power Converters Connected to Low Voltage
Distorted Power Systems with Variable Compensation Objectives
6. Power Factor Corrected Zeta Converter Based Improved Power QualitySwitched
Mode Power Supply
7. A Robust Synchronization to Enhance the Power Quality of Renewable Energy
Systems
8. A Synchronization Method for Single-Phase Grid-Tied Inverters
3. POWER ELECTRONICS & POWER SYSTEM TITLES 2015-2016
9. Variable Forgetting Factor Recursive Least Square Control Algorithm for
DSTATCOM
10. A New Virtual Harmonic Impedance Scheme for Harmonic Power Sharing in an
Islanded Microgrid
11. Optimal Design of High-Order Passive-Damped Filters for Grid-Connected
Applications
PFC CONVERTERS:
1. Efficient Single-Switch Boost-Dual-Input Flyback PFC Converter with Reduced
Switching Loss
2. Implementation of Bridgeless Cuk Power Factor Corrector with Positive Output
Voltage
3. An Integrated High-Power-Factor Converter with ZVS Transition
4. Modified Interleaved Current Sensorless Control for Three-Level
Boost PFCConverter with Considering Voltage Imbalance and Zero-Crossing Current
Distortion
5. A Novel Wall-Switched Step-Dimming Concept in LED Lighting Systems
using PFC Zeta Converter
6. Design of AC-DC PFC High-Order Converters with Regulated Output Current for
Low Power Applications
7. A High Voltage SiC-based Boost PFC for LED Applications
8. Power Factor Corrected Zeta Converter Based Improved Power Quality Switched
Mode Power Supply
9. Line Current Distortion Compensation for DCM/CRM Boost PFCConverters
10. PIC-Based Interleaved Buck Power Factor Corrector With Adaptive Slope
Compensation
11. A Novel Control Scheme of Quasi-Resonant Valley-Switching for High-Power-Factor
AC-to-DC LED Drivers
12. A Bridgeless BHB ZVS-PWM AC-AC Converter for High-Frequency Induction
Heating Applications
MULTI LEVEL INVERTER:
4. POWER ELECTRONICS & POWER SYSTEM TITLES 2015-2016
1. A Fault Tolerant Single Phase Five-level Inverter for Grid Independent PV systems
2. An Energy Stored Quasi-Z Source Cascade Multilevel Inverter based Photovoltaic
Power Generation System
3. A new switching scheme for a new multi level inverter topology for grid connected
PV systems
4. Implementation of SVM to improve the performance of a nine level inverterwith
reduced number of switches
5. Optimal Low Switching Frequency Pulsewidth Modulation of Nine-
LevelCascade Inverter
6. An Innovative Scheme of Symmetric Multilevel Voltage Source Inverter with Lower
Number of Circuit Devices
RESONANT CONVERTERS:
1. Resonant Converter With Resonant-Voltage-Multiplier Rectifier and Constant
Frequency Phase-Shift Control For Isolated Buck-Boost Power Conversion
2. Analysis and Design of Single-Switch Forward-Flyback Two-Channel LED Driver
with Resonant-Blocking Capacitor
3. Efficiency Optimization of LLC Resonant Converters Operating in Wide Input-
and/or Output-Voltage Range by On-the-Fly Topology-Morphing
4. Flying-Capacitor Based Hybrid LLC Converters with Input Voltage Auto-Balance
Ability for High Voltage Applications
5. Proportional-Resonant Current Controllers Design Based on Desired Transient
Performance
6. DCM-based Zero-Voltage Switching Control of a Bidirectional DC-DC
Converter With Variable Switching Frequency
7. Operating Conditions Monitoring for High Power Density and Cost-
Effective Resonant Power Converters
8. Analysis and Parameter Optimization of Start-up Process for LLC Resonant
Converter
9. A Zero-Voltage-Transition Bidirectional DC/DC Converter
Study on the Single-stage Forward-flyback PFC Converter with QR Control
WIND ENERGY CONVERSION SYSTEM:
5. POWER ELECTRONICS & POWER SYSTEM TITLES 2015-2016
1. Split Converter-Fed SRM Drive for Flexible Charging in EV/HEV Applications
2. Contribution of VSC-HVDC to Frequency Regulation of Power SystemsWith
Offshore Wind Generation
3. A Discrete-Time Direct Torque Control for Direct-Drive PMSG-
Based WindEnergy Conversion Systems
4. A Single Sensor Based MPPT Controller for Wind-Driven Induction Generators
Supplying DC Microgrid
5. Wound Rotor Machine With Single-Phase Stator and Three-Phase
RotorWindings Controlled by Isolated Three-Phase Inverter
6. Using Improved Power Electronics Modeling and Turbine Control to
Improve Wind Turbine Reliability
7. On the Design and Capacity of Grounding Systems for Grid-Connected DGUs
8. Maximum Power Point Tracking Strategy for Large-
Scale Wind GenerationSystems Considering Wind Turbine Dynamics
9. Reinforcement Learning-Based Intelligent Maximum Power Point Tracking Control
for Wind Energy Conversion Systems
FACTS CONTROL:
1. A New Control Strategy for Distributed Static Compensators Considering
Transmission Reactive Flow Constraints
2. FACTS Devices Allocation via Sparse Optimization
3. A Fast LP Approach for Enhanced Utilization of Variable Impedance Based
FACTS Devices
4. Individual Phase Current Control Based on Optimal Zero Sequence Current
Separation for a Star-Connected Cascade STATCOM under Unbalanced
Conditions
5. Full-bridge Reactive Power Compensator with Minimized Equipped Capacitor
and its Application to Static Var Compensator
6. Online Reference Limitation Method of Shunt-Connected Converters to the Grid
to Avoid Exceeding Voltage and Current Limits Under Unbalanced Operation
7. Application of PI and Super Twisting Drivers to Voltage Regulation of Wind farm
via StatCom
6. POWER ELECTRONICS & POWER SYSTEM TITLES 2015-2016
8. Reduced Capacitance Thin-Film H-Bridge
Multilevel STATCOM ControlUtilizing an Analytic Filtering Scheme
9. Modulation and Control of Transformer-less UPFC
10. An Integrated Dynamic Voltage Restorer-Ultracapacitor Design for Improving
Power Quality of the Distribution Grid
11. Dynamic Voltage Restorer Based on Three-Phases Inverters Cascaded Through an
Open-End Winding Transformer
12. Control strategy for Single-phase Transformerless Three-leg Unified Power
Quality Conditioner Based on Space Vector Modulation
13. Implementation of Hybrid Filter for 12-Pulse Thyristor Rectifier Supplying High-
Current Variable-Voltage DC Load
14. Shunt Active Power Filter With Open-End Winding Transformer and Series-
Connected Converters
HYBRID CONVERTERS:
1. Performance Analysis of Bidirectional DC–DC Converters for Electric Vehicles
2. Flying-Capacitor Based Hybrid LLC Converters with Input Voltage Auto-Balance
Ability for High Voltage Applications
3. A Hybrid Estimator for Active/Reactive Power Control of Single-Phase Distributed
Generation Systems with Energy Storage
4. Robust Global Stabilization of the DC-DC Boost Converter via HybridControl
5. Hybrid Modulation Scheme for High Frequency AC Link Inverter
6. Hybrid IPT Topologies With Constant Current or Constant Voltage Output for
Battery Charging Applications
7. Design, Operation and Control of S3 Inverter for Single-Phase Micro-Grid
Applications
8. Hybrid Three-Level and Half-Bridge DC-DC Converter With Reduced Circulating
Loss and Output Filter Inductance
9. Analysis of CLL Resonant Converter with Semi Bridgeless Active Rectifier
and Hybrid Control
10. A New Hybrid Boosting Converter (HBC) for Renewable Energy Applications
7. POWER ELECTRONICS & POWER SYSTEM TITLES 2015-2016
11. High Gain Zero Voltage Switching Bidirectional converter with reduced number of
switches
12. The Hybrid-Cascaded DC–DC Converters Suitable for HVdc Applications
13. Hybrid PWM-Resonant Converter for Electric Vehicle On-Board Battery Chargers
14. Burst Mode Elimination in High Power LLC Resonant Battery Charger for Electric
Vehicles
