Our RJ45 field plug pro allows for easy assembly without special tools! Available in 180 and 360 degree variants, these products are multiport capable and allow for up to 32 different cable positions!
Intrinsic Safety Barriers limit the energy delivered from a safe area to a hazardous area. This power limitation prevents the possibility of explosions due to a malfunction of the device. IS Barriers are used instead of explosion proof conduit and heavy cast housings. Electrical energy (voltage and
current) are held within safe limits, as is total energy. This removes the possibility of an explosion due to excessive heat. Intrinsically safe design offers cost and safety advantages in industrial process measurement and control operations.
Our RJ45 field plug pro allows for easy assembly without special tools! Available in 180 and 360 degree variants, these products are multiport capable and allow for up to 32 different cable positions!
Intrinsic Safety Barriers limit the energy delivered from a safe area to a hazardous area. This power limitation prevents the possibility of explosions due to a malfunction of the device. IS Barriers are used instead of explosion proof conduit and heavy cast housings. Electrical energy (voltage and
current) are held within safe limits, as is total energy. This removes the possibility of an explosion due to excessive heat. Intrinsically safe design offers cost and safety advantages in industrial process measurement and control operations.
The iNetVu® FLY-75V Flyaway Antenna is a 75 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere. It can be assembled in 10 minutes by one person.
The Bond Rite Clamp is the only Static Grounding Clamp that provides Operators with a VISUAL Reference that potentially charged equipment is connected to a verified static grounding point.
A dust and water resistant utility tracker for alerting unauthorized engine ignition and live transmission of vehicle travel route; alerts against vehicle thefts, over speeding, network signal loss, opening and shutting vehicle doors, monitors vehicle entries and exits of pre-defined boundaries. Allows remote control cut-off of vehicle engine. This tracker is very useful for light vehicles such as two, three and four wheelers.
This is an upgraded model of the GVT 06 as it has an SOS system that enables the driver of the vehicle to communicate his emergencies to the person monitoring his movements. These emergencies could be road accidents, road crimes, sickness, etc. Besides this, this tracker enables live tracking if vehicle, over speeding alerts, ignition, detection, etc.
4-20mA process current inputs are isolated and transmitted as 4-20mA output signals. Each channel operates independently
and is isolated from the others to prevent interaction between channels.
The Cat6 EcoBand Panel presents 24 Cat6 RJ45 ports in 1U of space with Vertical IDC punch down for
ease of termination. The robust body of the panel provides integrated rear cable management with a range
of cable fixing locations.
Nexans Euromold Separable Elbow Connectors 158LR are designed to terminate and connect high voltage polymeric cables to electrical equipment including motors, switchgear and transformers with Type A 250Amp interface as described by CENELEC EN50180 and 50181.
Nexans Euromold Elbow Connectors type 158LR meet the requirements of CENELEC HD 629.1.
Nexans Euromold separable elbow connectors are designed to terminate high voltage polymeric (XLPE EPR) screened (copper wire or copper tape) cables to CENELEC Interface Type A (250amp) bushings with 7.9mm plug-in pins, 11kV-24kV.
Nexans Euromold 158LR/G and Nexans Euromold 158LR seperable connectors are approved for terminating 11kV/12kV polymeric (XLPE EPR) cables into gas insulated (SF6) switchgear, including ABB Safe Ring Ring Main Units (RMU's) and ABB Safe Plus Switchgear. Euromold 158LR/G connectors include earthing leads.
The iNetVu® FLY-75V Flyaway Antenna is a 75 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere. It can be assembled in 10 minutes by one person.
The Bond Rite Clamp is the only Static Grounding Clamp that provides Operators with a VISUAL Reference that potentially charged equipment is connected to a verified static grounding point.
A dust and water resistant utility tracker for alerting unauthorized engine ignition and live transmission of vehicle travel route; alerts against vehicle thefts, over speeding, network signal loss, opening and shutting vehicle doors, monitors vehicle entries and exits of pre-defined boundaries. Allows remote control cut-off of vehicle engine. This tracker is very useful for light vehicles such as two, three and four wheelers.
This is an upgraded model of the GVT 06 as it has an SOS system that enables the driver of the vehicle to communicate his emergencies to the person monitoring his movements. These emergencies could be road accidents, road crimes, sickness, etc. Besides this, this tracker enables live tracking if vehicle, over speeding alerts, ignition, detection, etc.
4-20mA process current inputs are isolated and transmitted as 4-20mA output signals. Each channel operates independently
and is isolated from the others to prevent interaction between channels.
The Cat6 EcoBand Panel presents 24 Cat6 RJ45 ports in 1U of space with Vertical IDC punch down for
ease of termination. The robust body of the panel provides integrated rear cable management with a range
of cable fixing locations.
Nexans Euromold Separable Elbow Connectors 158LR are designed to terminate and connect high voltage polymeric cables to electrical equipment including motors, switchgear and transformers with Type A 250Amp interface as described by CENELEC EN50180 and 50181.
Nexans Euromold Elbow Connectors type 158LR meet the requirements of CENELEC HD 629.1.
Nexans Euromold separable elbow connectors are designed to terminate high voltage polymeric (XLPE EPR) screened (copper wire or copper tape) cables to CENELEC Interface Type A (250amp) bushings with 7.9mm plug-in pins, 11kV-24kV.
Nexans Euromold 158LR/G and Nexans Euromold 158LR seperable connectors are approved for terminating 11kV/12kV polymeric (XLPE EPR) cables into gas insulated (SF6) switchgear, including ABB Safe Ring Ring Main Units (RMU's) and ABB Safe Plus Switchgear. Euromold 158LR/G connectors include earthing leads.
Com base em pesquisas de mercado, cursos do setor, trabalhos realizados e muitas conversas com profissionais relevantes do mercado de marketing e comunicação, eu desenvolvi essa apresentação que revela uma visão sobre a publicidade atual.
O documento possui o foco em mídia digital, englobando os principais conceitos e práticas, inclusive mídia programática, das quais eu trouxe uma análise sobre o tema.
Vale conferir pois me preocupei em deixar bem claro aonde cada especialidade e novidade do mercado se encaixa.
Se tiver dúvidas me procure! Terei muito prazer em conversar sobre o tema!
Grande abraço!
Como a tecnologia mudará a forma de comprar um imóvel. Um novo tipo de consumidor exige novas formas de fazer negócio. O que empresas como Uber, Netflix, Spotify podem ensinar para o mercado imobiliário? E as fintechs? Elas irão atuar nesse mercado?
Palestra realizada em 04/11/2016 no 64º Encontro da ABMI (Associação Brasileira do Mercado Imobiliário) realizado na cidade do Rio de Janeiro.
Upcom optical cable assemblies provide the vital connectivity links and patching for your network.
Our in-house designed assemblies provide 1 to 288 fibers featuring IEC compliant components and a choice of performance levels to suit your network needs.
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold bushings (oil insulated) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series
Euromold 400LB Elbow Connectors & 400TB 440TB Elbow Connectors
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold bushings (oil insulated) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series
Euromold 400LB Elbow Connectors & 400TB 440TB Elbow Connectors
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold bushings (oil insulated) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series
Euromold 400LB Elbow Connectors & 400TB 440TB Elbow Connectors
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold bushings (oil insulated) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series
Euromold 400LB Elbow Connectors & 400TB 440TB Elbow Connectors
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold bushings (oil insulated) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series
Euromold 400LB Elbow Connectors & 400TB 440TB Elbow Connectors
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold bushings (oil insulated) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series
Euromold 400LB Elbow Connectors & 400TB 440TB Elbow Connectors
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
Fiber optic connectors have been around for many years, nearly since the creation of optical fiber itself. A key component of optical fiber is its ability to transmit light signals over long distances without attenuation, in other words without light lost along the optical path. There are many types of connectors to choose from as well as methods to connectorize fiber cables.
MEGA supplies a feature-rich range of North American power cord products, international power cords, assembled plugs and connectors, outlet strips and accessories, and wire and cable products. Each of these products is code-compliant in keeping with the prevailing industry standards, and can be shipped to any location worldwide. MEGA carries a rich inventory of power cords and related accessories at any given time, enabling us to rapidly dispatch the desired products.
Abb Combiflex Lugs 1.5, Abb Combiflex Lugs 2.5 | AKBAR TRADING EST. JUBAILAKBAR TRADING
Contact sockets, silver plated (set of 100 pcs)
10 A, conductor area 0,25-1,5 mm2
20 A, conductor area 1,5-2,5 mm2
1
1
1MRK 002 136-A
1MRK 002 136-D
50 g
90 g
Contact pins, silver plated (set of 100 pcs)
10 A, conductor area 0,25-1,5 mm2
20 A, conductor area 1,5-2,5 mm2
1
1
1MRK 002 136-G
1MRK 002 136-H
60 g
120 g
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Unsubscribed: Combat Subscription Fatigue With a Membership Mentality by Head...
Platinum Tools 90170 Data Sheet
1. Tele-TitanXg Crimp Tool
P/N 90170
10-Gig Shielded Connector
P/N 106190
Streaming media demands robust,
dependable networks, including 10-Gig
Cat6A shielded cable, to provide the
necessary expanded bandwidth. However,
these larger, shielded cables require special
connectors and tools.
Our 10-Gig shielded connector and
Tele-TitanXg crimp tool are specifically de-
signed to terminate Cat6A cables. A pairing
that assures you will achieve 10-Gig perfor-
mance... a true 10Gig Termination System.
Ï
See Kit
Inside
RJ45 Cat6A/10-Gig shielded connector:
• Max cable OD: 8.5mm/0.335"
• Max conductor OD: 1.35mm/0.053"
• Meets 10-Gig performance standard
• UL and RoHS compliant
Tele-TitanXg Crimp Tool:
• Specifically made for terminating, P/N 106190
• Straight action vertical crimp force
• Minimal hand force for a perfect crimp
Application:
• Cat6E • 10-Gig Cat6A
• Cat7
Tele-TitanXg Crimp Tool
P/N 12515C
RJ45
Cat6A/10-Gig
shielded connector
P/N 106190
For terminating
Cat6E, Cat6A, Cat7
and larger industrial
Ethernet cables.
10Gig Termination System
2. RJ45 Cat6A/10-Gig
Shielded Connectors P/N 106190
• Exceeds 10-Gig performance standard
• UL and RoHS compliant
• Max cable OD: 0.335”/8.5mm
• Max conductor OD: 0.053”/1.35mm
Connector Liner
Tele-TitanXg Crimp Tool P/N 12515C
• Specifically designed for RJ45 Cat6A/10-Gig
shielded connectors (Not for standard RJ45 modular plugs)
• Minimal hand force
• Straight action crimp
• Compact & rugged
• Terminates to industry specified crimp heights
• Stays securely closed with gun-style lock
• Built-in cable stripper for round wire and flat satin
• Easily control the blade
depth when stripping
• Built-in cable cutter
Applications:
• Cat6E, Cat6A, Cat7 &
over-sized Cat5e/6
industrial Ethernet cables
Kit Includes (P/N 90170):
• Tele-TitanXg Cat6A/10-Gig
Crimp Tool
• CT-360 External Ground
Crimp Tool
Cyclops®
2 Cable
Jacket Stripper P/N 15010C
• Self-adjusts to automatically
score PVC and Plenum
• Ready-to-use out of the kit
• Works with shielded/unshielded
twisted pair and fiber optic cables
• Accepts cable ODs
0.10" to 0.43" (2.5mm - 11mm)
CT-360 External Ground Crimp Tool P/N 12360C
• 360˚ crimp on the external ground tab of shielded RJ45 connectors
• Perform concentric termination with full control to prevent
over or under crimping
• Dual cavity covers wide range of cable ODs ranging from
0.245" to 0.335" (6.2mm - 8.5mm)
• Spring-loaded, non-ratcheted design
• Steel frame, black oxide finish, molded handles
• Cyclops®
2 Cable
Jacket Stripper
• RJ45 Cat6A/10-Gig Shielded Connectors
100 each, connectors & liners
10Gig Termination Kit...
meets 10-Gig performance standard.
RJ12/11
10-Gig RJ45
KitIncludes
Description P/N UPC CODE
10Gig Termination Kit 90170 849160006435
Tele-TitanXg 10-Gig Crimp Tool 12515C 849160005223
Cyclops 2 Cable Jacket Stripper 15010C 899740000254
CT-360 External Ground Crimp Tool 12360C 849160005148
RJ45 Cat6A/10-Gig
Shielded Connectors w/Liners, 100 pcs 106190 849160005155
Additional Connector & Liner P/Ns
RJ45 Cat6A/10-Gig
Shielded Connectors w/Liners, 50 pcs 106192C 849160005179
Spare Liners, 50 pcs 106194 849160006442
www.platinumtools.com We Make Connections EZ!
P/N 90170