Piston Assembly
•
0 likes•67 views
This parts list contains 10 items needed to assemble a piston. It includes the master arm, articulated rod, piston head, 4 bushings, 5 pins, 6 bolts, 7 rings, 8 bearings, and their respective quantities. The drawing number is Piston Assembly and it was drawn, checked, and approved by Khanh Tran on 9/20/2016 at a scale of 2.
Report
Share
Report
Share
Download to read offline
Recommended
Vise base4
This document contains technical drawings and specifications for parts of a vise. It includes 6 section views labeled D-D through F-F and 2 detail views J-J and K-K. It also contains a parts list with 14 numbered items, including materials, part numbers, quantities and descriptions of parts like the jaw plate, vise screw, collar, special key and handle components. Dimensioned drawings and notes provide information on hole sizes, threads, and other details to manufacture or assemble the parts.
EX7-72
This document contains drawings and a bill of materials for a bench vice. The drawings include section, top, front and side views showing the dimensions and assembly of the parts. The bill of materials lists 11 components of the vice including the base, sliding jaw, jaw plates, vice screw, collar, special key, handle rod and ball, slide key, set screws, flat head machine screws and taper pins along with their quantities and materials.
ViseEXPLODED
This parts list contains information about the materials, part numbers, quantities, and descriptions for parts that make up a vise. It includes 10 numbered parts for the vise made of materials like steel and SAE alloys. The parts include items like the vise base, sliding jaw, jaw plate, vise screw, collar, and handle components.
Vise base3
This document contains section views, part drawings, and a parts list for a sliding jaw assembly. Section H-H, M-M, and N-N show cross sections of the assembly at three different locations. The part drawings provide detailed dimensions for five individual parts that make up the assembly. The parts list identifies one part, the sliding jaw, along with its material, part number, and quantity needed.
Vise base2
This document contains a scale drawing of a vise base part with labeled dimensions. It includes a parts list identifying the material and part number for the vise base component. Dimensioned details are provided showing features of the vise base including holes, slots, and rounded edges.
Vise base
This parts list contains information about the materials, part numbers, quantities, and descriptions for parts that make up an assembly. It includes 10 numbered items such as a vise base, sliding jaw, jaw plate, vise screw, collar, and set screws. The materials listed include steel in various grades for the different parts.
EX7-72-2
This document contains a technical drawing with dimensions and specifications for the parts of a machine or tool. It includes over 30 individual parts with their dimensions, tolerances, notes on materials, drilling and machining operations. The title and school information at the bottom indicate it is a final project drawing for a student at ITT Technical Institute in Harrisburg, PA.
Pipe Insulation System
This document provides details for insulating pipe systems. It specifies using mineral fiber insulation conforming to ASTM C 547 Class 1, with a factory applied FSK/kraft paper laminate jacket. The insulation will be used on cold water, hot water, and chilled water pipes as described. Half wood sections will be inserted into the insulation and taped with FSK tape to maintain the vapor barrier. 360 degree type 40 pipe protection shields 12 inches long will be used, along with U-bolt or hanger supports conforming to MSS SP 58-69 Type 24 standards.
Recommended
Vise base4
This document contains technical drawings and specifications for parts of a vise. It includes 6 section views labeled D-D through F-F and 2 detail views J-J and K-K. It also contains a parts list with 14 numbered items, including materials, part numbers, quantities and descriptions of parts like the jaw plate, vise screw, collar, special key and handle components. Dimensioned drawings and notes provide information on hole sizes, threads, and other details to manufacture or assemble the parts.
EX7-72
This document contains drawings and a bill of materials for a bench vice. The drawings include section, top, front and side views showing the dimensions and assembly of the parts. The bill of materials lists 11 components of the vice including the base, sliding jaw, jaw plates, vice screw, collar, special key, handle rod and ball, slide key, set screws, flat head machine screws and taper pins along with their quantities and materials.
ViseEXPLODED
This parts list contains information about the materials, part numbers, quantities, and descriptions for parts that make up a vise. It includes 10 numbered parts for the vise made of materials like steel and SAE alloys. The parts include items like the vise base, sliding jaw, jaw plate, vise screw, collar, and handle components.
Vise base3
This document contains section views, part drawings, and a parts list for a sliding jaw assembly. Section H-H, M-M, and N-N show cross sections of the assembly at three different locations. The part drawings provide detailed dimensions for five individual parts that make up the assembly. The parts list identifies one part, the sliding jaw, along with its material, part number, and quantity needed.
Vise base2
This document contains a scale drawing of a vise base part with labeled dimensions. It includes a parts list identifying the material and part number for the vise base component. Dimensioned details are provided showing features of the vise base including holes, slots, and rounded edges.
Vise base
This parts list contains information about the materials, part numbers, quantities, and descriptions for parts that make up an assembly. It includes 10 numbered items such as a vise base, sliding jaw, jaw plate, vise screw, collar, and set screws. The materials listed include steel in various grades for the different parts.
EX7-72-2
This document contains a technical drawing with dimensions and specifications for the parts of a machine or tool. It includes over 30 individual parts with their dimensions, tolerances, notes on materials, drilling and machining operations. The title and school information at the bottom indicate it is a final project drawing for a student at ITT Technical Institute in Harrisburg, PA.
Pipe Insulation System
This document provides details for insulating pipe systems. It specifies using mineral fiber insulation conforming to ASTM C 547 Class 1, with a factory applied FSK/kraft paper laminate jacket. The insulation will be used on cold water, hot water, and chilled water pipes as described. Half wood sections will be inserted into the insulation and taped with FSK tape to maintain the vapor barrier. 360 degree type 40 pipe protection shields 12 inches long will be used, along with U-bolt or hanger supports conforming to MSS SP 58-69 Type 24 standards.
TTK #6
The document discusses various aspects of crankshafts, pistons, and rings. It covers crankshaft design basics like the spacing between journals on 4, 6, and 8 cylinder engines. It also discusses forged versus cast construction, checking crankshafts, resurfacing, piston temperature differences, oil control rings, and balance shafts.
Tipper-table assembly
This document contains design drawings and part lists for an assembly consisting of a base, lift table, and tabletop. The base assembly drawing shows the main frame, hinge and hydraulic tabs, and notes it is made from 1/4" steel. The lift table assembly lists 6 parts including an assembly frame base, tabletop, hydraulic cylinders, and notes part 6 is the purchased lift table. The tabletop assembly shows the main frame, side frames, rollers, tubing, and tabs, and notes the rollers have springs and hex bolts. Dimensioned detail drawings are provided for many of the individual parts.
TTK.#7
The document discusses various aspects of engine heads and valves, including installed spring height being important for lifter setup, pressure testing for leaks, alloy crack detection using staggered plugs, guide wear measurement, different types of valve guides, exhaust valve running temperatures, atomizer effect on oil consumption, grinding valve seats and angles, overhang measurements, and CVCC compound vortex combustion control.
TTK #8
The document discusses engine breathing and valve operation. It notes that the normal loading between a cam lobe and valve lifter often reaches 100,000 PSI. It also references steel tube cams with powder metal lobes, thimble travel distances, disc valve adjustments, wear areas on lifters, and maintaining the same lift and duration. The document briefly mentions compound vortex combustion.
2015 148. cvvt -KIA HYUNDAI
This technical service bulletin provides information about replacing the timing chain tensioner on some 2014-2016 Kia Cadenza vehicles. Some vehicles may experience a brief chattering or rattling noise from the engine after a cold soak. The bulletin outlines replacing the tensioner on the left (bank 2) side of the engine with an improved part to resolve the issue. Affected vehicles were produced from start of production through January 7, 2016. The repair is covered under warranty.
Daewoo doosan 430 plus skid steer loader service repair manual
This document contains 18 figures that describe parts of an engine. Each figure includes a diagram showing the part and a table listing the associated key components. The tables provide part numbers, descriptions, quantities and whether items are replaceable for the components in each engine part.
Wnner catalogo filtros 2010 2011
The document is a 2010-2011 catalog that lists specifications for oil, air, fuel, and coolant filters for various automotive applications including truck models from Chevrolet, Dodge, Ford, International and others. It provides the filter part numbers needed for each vehicle model, engine size, and year.
560 000-st-i-027
This document provides installation details for a pressure gage system used to monitor water, reagents, and air pressure. It was issued for construction on October 4, 2011. The document includes a parts list and specifications for piping components made of 316 stainless steel, including fittings, valves, tubing, and other accessories rated for 2000 Psi-g at 300°C.
TTK.#5
The document discusses various procedures and considerations for engine block construction and service, including precautions for engine removal, proper tool usage, protecting engine components, short and long block assembly, checking components for damage or alignment issues, honing cylinders, installing dry sleeves, and cam bearing hole alignment. Proper techniques and following guidelines are emphasized for tasks such as deck surfacing, bore gauging, and sleeve installation.
Claas ares 630 rx rz tractor parts catalogue manual (sn ct12 s0050 ct12s1535)
This document provides parts lists and specifications for engines and components of ARES 640 RZ / ARES 630 RX/RZ models. It includes over a dozen pages listing part numbers, descriptions, dimensions and quantities for items such as complete engines, crankcases, timing cases, oil pans, cylinder liners, pistons, connecting rods, crankshafts and more. Remarks provide additional details such as machine numbers, dimensions and conditions for some parts.
Part 4
This document summarizes the benefits of genuine DEUTZ cylinder piston assemblies for air-cooled compact engines. It notes that pistons in DEUTZ engines travel the distance between Toronto and New York every day. It then details how genuine DEUTZ parts ensure maximum safety and efficiency through perfect matching of components, minimal noise and optimal cooling. The document concludes that genuine DEUTZ parts save money through reduced fuel and oil consumption and longer service life.
Solid edge
Solid Edge es un sistema de diseño asistido por computadora (CAD) para el modelado mecánico y la producción de dibujos desarrollado por EDS. Utiliza la tecnología STREAM para ofrecer un sistema CAD fácil de usar y más productivo que otras opciones de gama media. Solid Edge incluye módulos para modelado de piezas, ensamblaje, planos y chapa guiados a la producción.
Solid Edge books
CADCIM Technologies publishes Computer Aided Design, Manufacturing, and Engineering (CAD/CAM/CAE), Civil, GIS, Animation, and Computer Programming textbooks with comprehensive study material known for clarity and in-depth coverage of subject. Additionally, it provides free teaching and learning resources with textbooks.
Design improvement-of-the-existing-car-jack-design---24-pages
This document summarizes a student's final project report on improving the design of a car jack. The student conducted research on existing car jack designs and identified key issues like them requiring significant strength and energy to operate. The objective of the project was to redesign the car jack to be more functional and consider human factors. The student followed a process flow chart that included problem analysis, literature review, concept creation, testing, and conclusion. The scope was to design a 3-ton hydraulic car jack that optimizes human power usage by replacing the long arm with a foot pedal for easier operation. CAD drawings and testing of the new design were also part of the project scope.
Design of half shaft and wheel hub assembly for racing car
The Half - Shaft and Wheel Hub of Formula One racing car was designed taking into consideration one of the popular model of Redbull racing car. The various dimension of shaft and hub were altered to attain maximum factor of safety.
Final Project_ Design and FEM Analysis of Scissor Jack
The document describes the design and finite element analysis of a scissor jack. It includes an overview of scissor jack components and operation, as well as calculations of forces and stresses on members. A series of mesh refinement studies were performed on the carrier member, lifting arms, and shaft screw to determine maximum stresses and displacements under expected loading conditions.
01 screw Jack
This document discusses screw jacks and includes:
1) An overview of screw jacks and how they are used to raise heavy loads through small heights using square threads for power transmission.
2) Questions about the type of thread used for screw jacks, their uses, paper sizes, title blocks, and drawing sheet layouts.
3) An assembly drawing assignment to create sectional and top views of a screw jack with a parts list and bill of materials.
Assembly of screw jack
Assembly of screw jack, Computer Aided Machine Drawing (CAMD) of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
Screw jack
The document discusses screw jacks, which are mechanical devices that use a screw mechanism to convert rotational motion into linear motion to raise or lower loads. Screw jacks operate by turning a lead screw, and can be manually operated or powered. Common types include scissor jacks and bottle jacks. The document outlines the components, materials, manufacturing processes, and assembly of a typical screw jack, noting that frames are often made of cast iron while screws use hardened steel or bronze for nuts. Screw jacks provide mechanical advantage through their screw mechanisms to allow lifting of heavy loads with minimal effort.
LMS Imagine.Lab Amesim/STAR-CCM+ co-simulation: solid stress analysis of a ge...
LMS Imagine.Lab Amesim/STAR-CCM+ co-simulation: solid stress analysis of a ge...Siemens PLM Software
This presentation introduces the co-simulation capabilities between LMS Imagine.Lab Amesim and Star-CCM+, illustrated in a gerotor pump example.
Please find more information on our website:
siemens.com/plm/simcenterMore Related Content
What's hot
TTK #6
The document discusses various aspects of crankshafts, pistons, and rings. It covers crankshaft design basics like the spacing between journals on 4, 6, and 8 cylinder engines. It also discusses forged versus cast construction, checking crankshafts, resurfacing, piston temperature differences, oil control rings, and balance shafts.
Tipper-table assembly
This document contains design drawings and part lists for an assembly consisting of a base, lift table, and tabletop. The base assembly drawing shows the main frame, hinge and hydraulic tabs, and notes it is made from 1/4" steel. The lift table assembly lists 6 parts including an assembly frame base, tabletop, hydraulic cylinders, and notes part 6 is the purchased lift table. The tabletop assembly shows the main frame, side frames, rollers, tubing, and tabs, and notes the rollers have springs and hex bolts. Dimensioned detail drawings are provided for many of the individual parts.
TTK.#7
The document discusses various aspects of engine heads and valves, including installed spring height being important for lifter setup, pressure testing for leaks, alloy crack detection using staggered plugs, guide wear measurement, different types of valve guides, exhaust valve running temperatures, atomizer effect on oil consumption, grinding valve seats and angles, overhang measurements, and CVCC compound vortex combustion control.
TTK #8
The document discusses engine breathing and valve operation. It notes that the normal loading between a cam lobe and valve lifter often reaches 100,000 PSI. It also references steel tube cams with powder metal lobes, thimble travel distances, disc valve adjustments, wear areas on lifters, and maintaining the same lift and duration. The document briefly mentions compound vortex combustion.
2015 148. cvvt -KIA HYUNDAI
This technical service bulletin provides information about replacing the timing chain tensioner on some 2014-2016 Kia Cadenza vehicles. Some vehicles may experience a brief chattering or rattling noise from the engine after a cold soak. The bulletin outlines replacing the tensioner on the left (bank 2) side of the engine with an improved part to resolve the issue. Affected vehicles were produced from start of production through January 7, 2016. The repair is covered under warranty.
Daewoo doosan 430 plus skid steer loader service repair manual
This document contains 18 figures that describe parts of an engine. Each figure includes a diagram showing the part and a table listing the associated key components. The tables provide part numbers, descriptions, quantities and whether items are replaceable for the components in each engine part.
Wnner catalogo filtros 2010 2011
The document is a 2010-2011 catalog that lists specifications for oil, air, fuel, and coolant filters for various automotive applications including truck models from Chevrolet, Dodge, Ford, International and others. It provides the filter part numbers needed for each vehicle model, engine size, and year.
560 000-st-i-027
This document provides installation details for a pressure gage system used to monitor water, reagents, and air pressure. It was issued for construction on October 4, 2011. The document includes a parts list and specifications for piping components made of 316 stainless steel, including fittings, valves, tubing, and other accessories rated for 2000 Psi-g at 300°C.
TTK.#5
The document discusses various procedures and considerations for engine block construction and service, including precautions for engine removal, proper tool usage, protecting engine components, short and long block assembly, checking components for damage or alignment issues, honing cylinders, installing dry sleeves, and cam bearing hole alignment. Proper techniques and following guidelines are emphasized for tasks such as deck surfacing, bore gauging, and sleeve installation.
Claas ares 630 rx rz tractor parts catalogue manual (sn ct12 s0050 ct12s1535)
This document provides parts lists and specifications for engines and components of ARES 640 RZ / ARES 630 RX/RZ models. It includes over a dozen pages listing part numbers, descriptions, dimensions and quantities for items such as complete engines, crankcases, timing cases, oil pans, cylinder liners, pistons, connecting rods, crankshafts and more. Remarks provide additional details such as machine numbers, dimensions and conditions for some parts.
What's hot (10)
Daewoo doosan 430 plus skid steer loader service repair manual
Daewoo doosan 430 plus skid steer loader service repair manual
Claas ares 630 rx rz tractor parts catalogue manual (sn ct12 s0050 ct12s1535)
Claas ares 630 rx rz tractor parts catalogue manual (sn ct12 s0050 ct12s1535)
Viewers also liked
Part 4
This document summarizes the benefits of genuine DEUTZ cylinder piston assemblies for air-cooled compact engines. It notes that pistons in DEUTZ engines travel the distance between Toronto and New York every day. It then details how genuine DEUTZ parts ensure maximum safety and efficiency through perfect matching of components, minimal noise and optimal cooling. The document concludes that genuine DEUTZ parts save money through reduced fuel and oil consumption and longer service life.
Solid edge
Solid Edge es un sistema de diseño asistido por computadora (CAD) para el modelado mecánico y la producción de dibujos desarrollado por EDS. Utiliza la tecnología STREAM para ofrecer un sistema CAD fácil de usar y más productivo que otras opciones de gama media. Solid Edge incluye módulos para modelado de piezas, ensamblaje, planos y chapa guiados a la producción.
Solid Edge books
CADCIM Technologies publishes Computer Aided Design, Manufacturing, and Engineering (CAD/CAM/CAE), Civil, GIS, Animation, and Computer Programming textbooks with comprehensive study material known for clarity and in-depth coverage of subject. Additionally, it provides free teaching and learning resources with textbooks.
Design improvement-of-the-existing-car-jack-design---24-pages
This document summarizes a student's final project report on improving the design of a car jack. The student conducted research on existing car jack designs and identified key issues like them requiring significant strength and energy to operate. The objective of the project was to redesign the car jack to be more functional and consider human factors. The student followed a process flow chart that included problem analysis, literature review, concept creation, testing, and conclusion. The scope was to design a 3-ton hydraulic car jack that optimizes human power usage by replacing the long arm with a foot pedal for easier operation. CAD drawings and testing of the new design were also part of the project scope.
Design of half shaft and wheel hub assembly for racing car
The Half - Shaft and Wheel Hub of Formula One racing car was designed taking into consideration one of the popular model of Redbull racing car. The various dimension of shaft and hub were altered to attain maximum factor of safety.
Final Project_ Design and FEM Analysis of Scissor Jack
The document describes the design and finite element analysis of a scissor jack. It includes an overview of scissor jack components and operation, as well as calculations of forces and stresses on members. A series of mesh refinement studies were performed on the carrier member, lifting arms, and shaft screw to determine maximum stresses and displacements under expected loading conditions.
01 screw Jack
This document discusses screw jacks and includes:
1) An overview of screw jacks and how they are used to raise heavy loads through small heights using square threads for power transmission.
2) Questions about the type of thread used for screw jacks, their uses, paper sizes, title blocks, and drawing sheet layouts.
3) An assembly drawing assignment to create sectional and top views of a screw jack with a parts list and bill of materials.
Assembly of screw jack
Assembly of screw jack, Computer Aided Machine Drawing (CAMD) of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
Screw jack
The document discusses screw jacks, which are mechanical devices that use a screw mechanism to convert rotational motion into linear motion to raise or lower loads. Screw jacks operate by turning a lead screw, and can be manually operated or powered. Common types include scissor jacks and bottle jacks. The document outlines the components, materials, manufacturing processes, and assembly of a typical screw jack, noting that frames are often made of cast iron while screws use hardened steel or bronze for nuts. Screw jacks provide mechanical advantage through their screw mechanisms to allow lifting of heavy loads with minimal effort.
LMS Imagine.Lab Amesim/STAR-CCM+ co-simulation: solid stress analysis of a ge...
LMS Imagine.Lab Amesim/STAR-CCM+ co-simulation: solid stress analysis of a ge...Siemens PLM Software
This presentation introduces the co-simulation capabilities between LMS Imagine.Lab Amesim and Star-CCM+, illustrated in a gerotor pump example.
Please find more information on our website:
siemens.com/plm/simcenterViewers also liked (11)
Design improvement-of-the-existing-car-jack-design---24-pages
Design improvement-of-the-existing-car-jack-design---24-pages
Design of half shaft and wheel hub assembly for racing car
Design of half shaft and wheel hub assembly for racing car
Final Project_ Design and FEM Analysis of Scissor Jack
Final Project_ Design and FEM Analysis of Scissor Jack
LMS Imagine.Lab Amesim/STAR-CCM+ co-simulation: solid stress analysis of a ge...
LMS Imagine.Lab Amesim/STAR-CCM+ co-simulation: solid stress analysis of a ge...
Piston Assembly
- 1. PARTS LIST DESCRIPTIONPART NUMBERQTYITEM Master arm11 Articulated Rod42 Piston head53 4-Rod Bush-Upper54 5-Piston Pin55 6-Bolt56 7-Piston Ring57 8-Rod Bush-Lower58 9-Link Pin59 10-Master Rod Bearing510 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 A A B B C C D D DRAWN CHECKED QA MFG APPROVED KHANH TRAN KHANH TRAN 9/20/2016 DWG NO Piston Assembly TITLE SIZE D SCALE REV 3 2 4 5 7 6 8 9 10 PISTON ASSEMBLY