TTK #6
•
1 like•627 views
The document discusses various aspects of crankshafts, pistons, and rings. It covers crankshaft design basics like the spacing between journals on 4, 6, and 8 cylinder engines. It also discusses forged versus cast construction, checking crankshafts, resurfacing, piston temperature differences, oil control rings, and balance shafts.
Report
Share
Report
Share
Recommended
TTK.#7
The document discusses various aspects of engine heads and valves, including installed spring height being important for lifter setup, pressure testing for leaks, alloy crack detection using staggered plugs, guide wear measurement, different types of valve guides, exhaust valve running temperatures, atomizer effect on oil consumption, grinding valve seats and angles, overhang measurements, and CVCC compound vortex combustion control.
TTK #8
The document discusses engine breathing and valve operation. It notes that the normal loading between a cam lobe and valve lifter often reaches 100,000 PSI. It also references steel tube cams with powder metal lobes, thimble travel distances, disc valve adjustments, wear areas on lifters, and maintaining the same lift and duration. The document briefly mentions compound vortex combustion.
TTK.#5
The document discusses various procedures and considerations for engine block construction and service, including precautions for engine removal, proper tool usage, protecting engine components, short and long block assembly, checking components for damage or alignment issues, honing cylinders, installing dry sleeves, and cam bearing hole alignment. Proper techniques and following guidelines are emphasized for tasks such as deck surfacing, bore gauging, and sleeve installation.
Cartouche rdc+1°2°3°et type-c (1) (1)
This document appears to be a technical report containing data and measurements related to studying planets. It includes tables of letters and numbers that could represent measurements of different planets or planetary properties. The document also includes totals for area, volume, and various measurement values that were recorded.
Bellman ford (part-ii)
The document describes the Dijkstra's algorithm for finding the shortest paths between vertices in a graph. It provides an example graph with 8 vertices (A-H) and runs the algorithm on it. The algorithm works by first assigning a distance of 0 to the source vertex A and infinity to others. It then iteratively finds the closest unvisited vertex and updates distances until all vertices are visited. The example runs the algorithm on the graph in 4 steps, updating distances and parents at each step until it converges to the final shortest paths.
ViseEXPLODED
This parts list contains information about the materials, part numbers, quantities, and descriptions for parts that make up a vise. It includes 10 numbered parts for the vise made of materials like steel and SAE alloys. The parts include items like the vise base, sliding jaw, jaw plate, vise screw, collar, and handle components.
Vise base4
This document contains technical drawings and specifications for parts of a vise. It includes 6 section views labeled D-D through F-F and 2 detail views J-J and K-K. It also contains a parts list with 14 numbered items, including materials, part numbers, quantities and descriptions of parts like the jaw plate, vise screw, collar, special key and handle components. Dimensioned drawings and notes provide information on hole sizes, threads, and other details to manufacture or assemble the parts.
EX7-72
This document contains drawings and a bill of materials for a bench vice. The drawings include section, top, front and side views showing the dimensions and assembly of the parts. The bill of materials lists 11 components of the vice including the base, sliding jaw, jaw plates, vice screw, collar, special key, handle rod and ball, slide key, set screws, flat head machine screws and taper pins along with their quantities and materials.
Recommended
TTK.#7
The document discusses various aspects of engine heads and valves, including installed spring height being important for lifter setup, pressure testing for leaks, alloy crack detection using staggered plugs, guide wear measurement, different types of valve guides, exhaust valve running temperatures, atomizer effect on oil consumption, grinding valve seats and angles, overhang measurements, and CVCC compound vortex combustion control.
TTK #8
The document discusses engine breathing and valve operation. It notes that the normal loading between a cam lobe and valve lifter often reaches 100,000 PSI. It also references steel tube cams with powder metal lobes, thimble travel distances, disc valve adjustments, wear areas on lifters, and maintaining the same lift and duration. The document briefly mentions compound vortex combustion.
TTK.#5
The document discusses various procedures and considerations for engine block construction and service, including precautions for engine removal, proper tool usage, protecting engine components, short and long block assembly, checking components for damage or alignment issues, honing cylinders, installing dry sleeves, and cam bearing hole alignment. Proper techniques and following guidelines are emphasized for tasks such as deck surfacing, bore gauging, and sleeve installation.
Cartouche rdc+1°2°3°et type-c (1) (1)
This document appears to be a technical report containing data and measurements related to studying planets. It includes tables of letters and numbers that could represent measurements of different planets or planetary properties. The document also includes totals for area, volume, and various measurement values that were recorded.
Bellman ford (part-ii)
The document describes the Dijkstra's algorithm for finding the shortest paths between vertices in a graph. It provides an example graph with 8 vertices (A-H) and runs the algorithm on it. The algorithm works by first assigning a distance of 0 to the source vertex A and infinity to others. It then iteratively finds the closest unvisited vertex and updates distances until all vertices are visited. The example runs the algorithm on the graph in 4 steps, updating distances and parents at each step until it converges to the final shortest paths.
ViseEXPLODED
This parts list contains information about the materials, part numbers, quantities, and descriptions for parts that make up a vise. It includes 10 numbered parts for the vise made of materials like steel and SAE alloys. The parts include items like the vise base, sliding jaw, jaw plate, vise screw, collar, and handle components.
Vise base4
This document contains technical drawings and specifications for parts of a vise. It includes 6 section views labeled D-D through F-F and 2 detail views J-J and K-K. It also contains a parts list with 14 numbered items, including materials, part numbers, quantities and descriptions of parts like the jaw plate, vise screw, collar, special key and handle components. Dimensioned drawings and notes provide information on hole sizes, threads, and other details to manufacture or assemble the parts.
EX7-72
This document contains drawings and a bill of materials for a bench vice. The drawings include section, top, front and side views showing the dimensions and assembly of the parts. The bill of materials lists 11 components of the vice including the base, sliding jaw, jaw plates, vice screw, collar, special key, handle rod and ball, slide key, set screws, flat head machine screws and taper pins along with their quantities and materials.
Vise base2
This document contains a scale drawing of a vise base part with labeled dimensions. It includes a parts list identifying the material and part number for the vise base component. Dimensioned details are provided showing features of the vise base including holes, slots, and rounded edges.
004.STC.001.PDF
This document provides a bill of materials and exploded view diagram for a steam collector. It includes 29 items such as pipes, valves, flanges, gaskets, and supports. The diagram shows how the components connect and assemble to allow steam expansion from a collector pipe to the atmosphere.
Ut t04
The document contains two tables showing measurements for points on a shell plan and roof plan. The shell plan table lists point numbers, measurements for 15 points, and notes N/A for some empty cells. The roof plan table similarly lists 6 points and measurements, along with labels for various locations around the roof perimeter.
Vise base
This parts list contains information about the materials, part numbers, quantities, and descriptions for parts that make up an assembly. It includes 10 numbered items such as a vise base, sliding jaw, jaw plate, vise screw, collar, and set screws. The materials listed include steel in various grades for the different parts.
Llavero javier
The document contains engineering drawings for a keychain including dimensions and views. It includes a top view with dimensions, a section view cutting through the center, and an enlarged detail view of one end. The drawings were created by Javier Combita, checked by Oscar Fernandez, and approved on April 5, 2016 for the keychain project.
3D Drawing Samples
This document contains parts lists and drawings for various compressor components including pistons, rods, valves, and related parts. It provides item numbers, part names and descriptions for 19 items in a packing case assembly, 10 items in a discharge valve assembly, 11 items in a suction valve assembly, 9 items for a piston rod assembly, and lists other drawings for additional assemblies. Dimensions, materials, weights and other specifications are included for the different parts.
EX7-72-2
This document contains a technical drawing with dimensions and specifications for the parts of a machine or tool. It includes over 30 individual parts with their dimensions, tolerances, notes on materials, drilling and machining operations. The title and school information at the bottom indicate it is a final project drawing for a student at ITT Technical Institute in Harrisburg, PA.
Planos section 2
The document appears to be a technical drawing sheet showing a cross section of a part called the "MAIN PART / SECTION 2" for a product called the "CRABBY VALV". It includes labels for dimensions and features like "A", "B", "C", and "D". The drawing is sheet 5 of 5, was drawn by Diego Moreno, checked by Oscar Fernandez, and approved on February 6, 2016.
Vise base3
This document contains section views, part drawings, and a parts list for a sliding jaw assembly. Section H-H, M-M, and N-N show cross sections of the assembly at three different locations. The part drawings provide detailed dimensions for five individual parts that make up the assembly. The parts list identifies one part, the sliding jaw, along with its material, part number, and quantity needed.
مته های حفاری
This document discusses different types of drill bits used in oil and gas drilling operations, including roller cone bits, fixed cutter bits, drag bits, and other specialized bit designs. It covers the main components of a drilling system from drill collars and drill pipe to the drill bit itself. The document also lists various bit cutting structures like milled tooth, tungsten carbide inserts, and different kinds of diamond compact bits.
Flanges
This document contains specifications for Cameron flanges in various sizes, including the flange size, gasket size, inner diameter, bolt size, bolt circle diameter, and number of bolts. Flange sizes listed are 4-1/16 inch, 3-1/16 inch, 3-1/8 inch, and 2-9/16 inch, each available in 15K, 10K, and 5K pressure ratings. The specifications provide the necessary details to ensure proper fitting and installation of the Cameron flanges.
Otis Portfolio 01
The document is a shot list for a scene called "004_20" that is 57 minutes and 10 seconds long. It contains 61 panels of varying durations that make up the scene. The shot list provides the page number and duration for each panel.
Oil saver parts
Western Silverline carries replacement parts for Type H and Type HD Oil Savers. They provide contact information including their website, email, phone number, and address in Edmonton, Alberta. The document then lists 19 individual repair parts for oil savers along with the number of each part required for single and double models.
Karmas world portfolio 01
The document describes 11 scenes with varying numbers of panels and durations. Each scene contains information on its duration, number of panels, and the duration of each panel. Page numbers are provided at the end of each entry. The content appears to be a shot list or storyboard for a video or film.
Piston Assembly
This parts list contains 10 items needed to assemble a piston. It includes the master arm, articulated rod, piston head, 4 bushings, 5 pins, 6 bolts, 7 rings, 8 bearings, and their respective quantities. The drawing number is Piston Assembly and it was drawn, checked, and approved by Khanh Tran on 9/20/2016 at a scale of 2.
Fersa summary 2018
This document provides specifications for Fersa single row tapered roller bearings in metric series. It lists the dimensions including inner diameter (d), outer diameter (D), and width (T) for various bearing models in the 302, 303, 313, 320, 322, and 323 series. Dimensions are provided in millimeters. The document appears to be an excerpt from a Fersa bearing catalog, showing metric single row tapered roller bearing options.
Cebeco.pdf
Cebeco Pty Ltd is a leading manufacturer and supplier of quality products for the oil and gas, petrochemical, process and mining industry. visit - cebeco.com.au
YDM Replaceable Type
This document lists dental instruments and their part numbers, including explorers, periodontal probes, scalers, gracey curettes, composite filling instruments, and spreaders. The instruments have replaceable tips that should be removed before sterilization. Some instruments can be combined by attaching different tips, such as an explorer and probe or explorer and scaler. Each instrument part is listed along with its number.
นำเสนอคุ้มกันวัยใส
This document contains various statistical data organized into tables and lists. The data includes percentages, counts, and numerical values related to categories 1 through 5. The document also describes 4 statistical models labeled G&B TR5 with associated statistical values.
1119 broks street houston, tx 77009
The document contains architectural plans, elevations, sections and 3D views of a building project. It includes floor plans of the ground floor and first floor, large scale views of specific areas like the kitchen and bathrooms, and 3D exterior and interior views of the building. Metadata at the bottom provides information about the scale, author, date and other details pertaining to the project.
TTK .#4
The document discusses various engine diagnosis topics for a T.T.K. #4 engine, including oil consumption, leaks, valve carbon coking, exhaust temperatures, compression and leak down testing, vacuum readings, ignition timing, pre-ignition vs detonation, compression ratios, volumetric efficiency, cooling system pressure testing, radiator caps, hoses, water pumps, coolant condition, gear backlash, timing chains, and items to check on single overhead cam engines.
More Related Content
What's hot
Vise base2
This document contains a scale drawing of a vise base part with labeled dimensions. It includes a parts list identifying the material and part number for the vise base component. Dimensioned details are provided showing features of the vise base including holes, slots, and rounded edges.
004.STC.001.PDF
This document provides a bill of materials and exploded view diagram for a steam collector. It includes 29 items such as pipes, valves, flanges, gaskets, and supports. The diagram shows how the components connect and assemble to allow steam expansion from a collector pipe to the atmosphere.
Ut t04
The document contains two tables showing measurements for points on a shell plan and roof plan. The shell plan table lists point numbers, measurements for 15 points, and notes N/A for some empty cells. The roof plan table similarly lists 6 points and measurements, along with labels for various locations around the roof perimeter.
Vise base
This parts list contains information about the materials, part numbers, quantities, and descriptions for parts that make up an assembly. It includes 10 numbered items such as a vise base, sliding jaw, jaw plate, vise screw, collar, and set screws. The materials listed include steel in various grades for the different parts.
Llavero javier
The document contains engineering drawings for a keychain including dimensions and views. It includes a top view with dimensions, a section view cutting through the center, and an enlarged detail view of one end. The drawings were created by Javier Combita, checked by Oscar Fernandez, and approved on April 5, 2016 for the keychain project.
3D Drawing Samples
This document contains parts lists and drawings for various compressor components including pistons, rods, valves, and related parts. It provides item numbers, part names and descriptions for 19 items in a packing case assembly, 10 items in a discharge valve assembly, 11 items in a suction valve assembly, 9 items for a piston rod assembly, and lists other drawings for additional assemblies. Dimensions, materials, weights and other specifications are included for the different parts.
EX7-72-2
This document contains a technical drawing with dimensions and specifications for the parts of a machine or tool. It includes over 30 individual parts with their dimensions, tolerances, notes on materials, drilling and machining operations. The title and school information at the bottom indicate it is a final project drawing for a student at ITT Technical Institute in Harrisburg, PA.
Planos section 2
The document appears to be a technical drawing sheet showing a cross section of a part called the "MAIN PART / SECTION 2" for a product called the "CRABBY VALV". It includes labels for dimensions and features like "A", "B", "C", and "D". The drawing is sheet 5 of 5, was drawn by Diego Moreno, checked by Oscar Fernandez, and approved on February 6, 2016.
Vise base3
This document contains section views, part drawings, and a parts list for a sliding jaw assembly. Section H-H, M-M, and N-N show cross sections of the assembly at three different locations. The part drawings provide detailed dimensions for five individual parts that make up the assembly. The parts list identifies one part, the sliding jaw, along with its material, part number, and quantity needed.
مته های حفاری
This document discusses different types of drill bits used in oil and gas drilling operations, including roller cone bits, fixed cutter bits, drag bits, and other specialized bit designs. It covers the main components of a drilling system from drill collars and drill pipe to the drill bit itself. The document also lists various bit cutting structures like milled tooth, tungsten carbide inserts, and different kinds of diamond compact bits.
Flanges
This document contains specifications for Cameron flanges in various sizes, including the flange size, gasket size, inner diameter, bolt size, bolt circle diameter, and number of bolts. Flange sizes listed are 4-1/16 inch, 3-1/16 inch, 3-1/8 inch, and 2-9/16 inch, each available in 15K, 10K, and 5K pressure ratings. The specifications provide the necessary details to ensure proper fitting and installation of the Cameron flanges.
Otis Portfolio 01
The document is a shot list for a scene called "004_20" that is 57 minutes and 10 seconds long. It contains 61 panels of varying durations that make up the scene. The shot list provides the page number and duration for each panel.
Oil saver parts
Western Silverline carries replacement parts for Type H and Type HD Oil Savers. They provide contact information including their website, email, phone number, and address in Edmonton, Alberta. The document then lists 19 individual repair parts for oil savers along with the number of each part required for single and double models.
Karmas world portfolio 01
The document describes 11 scenes with varying numbers of panels and durations. Each scene contains information on its duration, number of panels, and the duration of each panel. Page numbers are provided at the end of each entry. The content appears to be a shot list or storyboard for a video or film.
Piston Assembly
This parts list contains 10 items needed to assemble a piston. It includes the master arm, articulated rod, piston head, 4 bushings, 5 pins, 6 bolts, 7 rings, 8 bearings, and their respective quantities. The drawing number is Piston Assembly and it was drawn, checked, and approved by Khanh Tran on 9/20/2016 at a scale of 2.
Fersa summary 2018
This document provides specifications for Fersa single row tapered roller bearings in metric series. It lists the dimensions including inner diameter (d), outer diameter (D), and width (T) for various bearing models in the 302, 303, 313, 320, 322, and 323 series. Dimensions are provided in millimeters. The document appears to be an excerpt from a Fersa bearing catalog, showing metric single row tapered roller bearing options.
Cebeco.pdf
Cebeco Pty Ltd is a leading manufacturer and supplier of quality products for the oil and gas, petrochemical, process and mining industry. visit - cebeco.com.au
YDM Replaceable Type
This document lists dental instruments and their part numbers, including explorers, periodontal probes, scalers, gracey curettes, composite filling instruments, and spreaders. The instruments have replaceable tips that should be removed before sterilization. Some instruments can be combined by attaching different tips, such as an explorer and probe or explorer and scaler. Each instrument part is listed along with its number.
นำเสนอคุ้มกันวัยใส
This document contains various statistical data organized into tables and lists. The data includes percentages, counts, and numerical values related to categories 1 through 5. The document also describes 4 statistical models labeled G&B TR5 with associated statistical values.
1119 broks street houston, tx 77009
The document contains architectural plans, elevations, sections and 3D views of a building project. It includes floor plans of the ground floor and first floor, large scale views of specific areas like the kitchen and bathrooms, and 3D exterior and interior views of the building. Metadata at the bottom provides information about the scale, author, date and other details pertaining to the project.
What's hot (20)
More from medinage
TTK .#4
The document discusses various engine diagnosis topics for a T.T.K. #4 engine, including oil consumption, leaks, valve carbon coking, exhaust temperatures, compression and leak down testing, vacuum readings, ignition timing, pre-ignition vs detonation, compression ratios, volumetric efficiency, cooling system pressure testing, radiator caps, hoses, water pumps, coolant condition, gear backlash, timing chains, and items to check on single overhead cam engines.
T.t.k.#3 1 eng.operation
The document provides definitions and explanations of key terms related to internal combustion engine cycles and operation. It discusses the four-stroke cycle, including the intake, compression, power, and exhaust strokes. It also defines terms like top dead center, piston stroke, cylinder displacement, compression ratio, and ignition timing. The document reviews cylinder arrangements, valve train configurations like overhead camshafts, crankshaft arrangements, firing orders, and abnormal combustion issues like detonation and pre-ignition.
T.t.k.#2 4 writeitright
This document outlines shop procedures at an automotive repair facility. It discusses procedures for repair orders, requisitioning parts, vehicle handling, clean up, and time cards. Repair orders must be completed before any work begins and keys and batteries must be handled properly. Parts are delivered daily at 11am and clean up is a team effort overseen by a foreman. Neatness and following procedures are emphasized throughout.
T.t.k.#2 3 pretestcritique
The document provides definitions and explanations of key engine parts and concepts. It lists the 16 main engine parts and describes the four strokes of a four-stroke engine cycle. Key terms defined include top dead center, bottom dead center, piston stroke, engine displacement, cylinder bore, compression ratio, heat of compression, preignition, detonation, and volumetric efficiency. Diagrams illustrate the four stroke cycle and compression ratio.
T.T.T.#2 2 chartstoownandsave(wor#089
The document discusses various methods for identifying vehicles and vehicle parts, including VIN numbers, labels, stickers, and physical descriptions. It also covers bolts and fasteners, including different grades, sizes, threads, and torque specifications. Finally, it discusses seals, sealers, locking compounds and lubrication as they relate to vehicle repair and identification.
T.t.k.#2 1 Measuring
The document provides instruction on how to measure using various tools and convert between fraction and decimal units of measurement. It discusses reading rulers, scales, calipers, micrometers and converting between English and metric units. The document aims to teach students the basics of measuring tools, units of measurement, and how to read and set different measuring instruments.
AC Electrical
The document discusses various electrical components and systems related to AC electrical circuits, including relay reviews, clutch circuits, thermistors, thermostats, power steering switches, blower circuits, NPN transistors, plenum controls, ventilation systems, HEPA filters, servo motors, and vacuum valves. It provides information on different sensors, controls, and technologies that are part of automotive air conditioning and ventilation systems.
TTK 2C Retrofit
The document discusses the process and requirements for retrofitting a vehicle's air conditioning system to use R-134a refrigerant instead of R-12. Key points covered include:
- A retrofit takes approximately 1 hour to complete
- R-134a is a hydrofluorocarbon with no chlorine, while R-12 is a chlorofluorocarbon
- Components that typically need to be changed include service fittings, high pressure switch, oil, desiccant, labels, hoses, evaporator, condenser
- The recommended amount of R-134a to use is approximately 80% of the original R-12 charge
TTK 2B Cooling System
The document discusses various components and operation of vehicle cooling systems. It describes water jackets, water pumps, radiator configurations (downflow vs crossflow), radiator construction types, the purpose of radiator caps (prevent surge loss and raise boiling point), seals in radiator caps, replacement radiator caps, coolant recovery bottles, fan clutch operation and types, electric fan operation, thermostats, determining hose condition, bypass hoses, best hose clamps, heater cores, heater hose sizes, types of heater valves, adjusting cable operated heater valves, temperature idiot lights, operation of vapor expansion, balancing coil, and thermostatic coil coolant temperature gauges and sending units, computer
TTK 2A Hoses and Fittings
The document discusses different types of hoses, lines, seals, and fittings used in HVAC systems. It describes older neoprene hoses, newer barrier hoses with nylon cores, and metal lines. It explains that hoses are measured by number designation and discusses how hoses connect to metal tubing, either with barbed or grooved fittings. The document also lists different ways that metal fittings connect, including flange fittings and O-ring configurations. It recommends newer barrier hose because R-134a refrigerant operates at higher pressures and its smaller molecules must not be allowed to escape to the atmosphere.
TTK 1K Orifice Tube
An orifice tube is a fixed restriction located between the condenser and evaporator that throttles refrigerant flow. It can be located anywhere in that section of the AC system. Special tools are required to remove and replace orifice tubes. Technician B is correct that if both sides of the orifice tube are hot, it could indicate the tube is clogged and causing a lack of cooling. Common manufacturers that may use orifice tube systems include GM, Ford, Chrysler and Toyota. Modern systems increasingly use variable displacement compressors and thermostatic expansion valves rather than fixed orifice tubes.
TTK 1N Variable Displacement Compressor
A starved evaporator is more serious than a flooded evaporator because sufficient heat will not be absorbed in the evaporator without enough refrigerant, and refrigerant may be superheated returning to the compressor in a starved evaporator, damaging the compressor. Variable displacement compressors have been used for about 20 years and use reed valves to control refrigerant flow into cylinders. Electronic control makes it easier to run compressors continuously by reducing displacement closer to zero than mechanical controls.
TTK 1M Suction Sontrol Systems
This document discusses several older air conditioning suction control systems used by Chrysler, GM, and Ford from the 1960s through the early 1980s. The Chrysler system used from 1961-1982 maintained a low side pressure of 22-31 psi. GM's pilot operated absolute suction throttling system from 1966-1979 kept an evaporator pressure of 28-32 psi. Ford employed a suction throttle valve system from 1972-1981 and a combo valve that both maintained a low side pressure of 28-32 psi and were used from the 1970s through mid-1980s. GM also utilized a valve in receiver system from 1973-1979 that operated at 28-32 psi low side pressure.
TTK 1K Accumulator
An accumulator separates liquid refrigerant from vapor refrigerant to protect the compressor. It contains a liquid to vapor separator, desiccant, and filter. The liquid to vapor separator allows only vapor to exit the accumulator to the compressor, preventing damage from liquid refrigerant. An accumulator should be replaced when the system is open to the atmosphere for over 20 minutes, a major component is replaced, or during a retrofit. The purpose of the desiccant is to dry the refrigerant.
TTK 1L Filter/Driers
The document discusses filter driers, which are used to remove moisture and contaminants from HVAC/R system refrigerant. Filter driers contain desiccant, which absorbs moisture, preventing damage. Different desiccants are used depending on the refrigerant type (R-12 or R-134a). When servicing a system, the filter drier should be replaced if the system is open to air for over 20 minutes or a major component is changed.
TTK 1K TXV system
A flooded evaporator is more serious than a starved evaporator because liquid refrigerant may return to the compressor, damaging the compressor.
TTK 1H Condenser
Condensers are heat exchangers that transfer heat from the refrigerant to the air. There are different types of condensers including round tube serpentine condensers, oval/flat tube serpentine condensers, and oval/flat tube parallel flow condensers. Flat tube condensers are more efficient. Serpentine condensers have refrigerant flowing back and forth through tubes, while parallel flow condensers have groups of parallel tubes with some carrying refrigerant left to right and others right to left. The purpose of the condenser is to change the refrigerant vapor to a liquid by decreasing its temperature and pressure.
TTK 1G 2 Cluch Basics
The document discusses different types of cycling switches used in HVAC systems, including thermostatic switches to prevent ice buildup, deice switches located on evaporator housings, and pressure cycling switches. Pressure cycling switches are used to cut power based on refrigerant pressure levels, with high side switches shutting down the system below 50 PSI or above 400 PSI typically. The location of high side pressure switches can vary anywhere in the system. Thermistors are also mentioned as sensors that change resistance with temperature changes.
TTK 1G Cluch Basics
The document discusses various aspects of automotive air conditioning clutches, including:
- Modern clutches typically use a stationary magnetic field rather than a rotating field and do not require brush sets.
- Typical clutch circuits include switches such as de-ice, low pressure, and high pressure switches that are usually placed in the electrical schematic between the A/C control head and clutch coil.
- Additional switches beyond typical de-ice, low pressure, and high pressure switches can be included in a system depending on the engineer's design, though switches are generally placed in the electrical schematic between the control head and clutch coil.
More from medinage (20)
Recently uploaded
一比一原版(Columbia文凭证书)哥伦比亚大学毕业证如何办理
一模一样【微信：176555708】【(Columbia文凭证书)哥伦比亚大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一模一样【微信：176555708】【(WashU文凭证书)圣路易斯华盛顿大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(napier毕业证书)英国龙比亚大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(OP毕业证)奥塔哥理工学院毕业证成绩单如何办理
OP毕业证【微信95270640】《如何办理奥塔哥理工学院毕业证认证》【办证Q微信95270640】《奥塔哥理工学院文凭毕业证制作》《OP学历学位证书哪里买》办理奥塔哥理工学院学位证书扫描件、办理奥塔哥理工学院雅思证书！
国际留学归国服务中心《如何办奥塔哥理工学院毕业证认证》《OP学位证书扫描件哪里买》实体公司，注册经营，行业标杆，精益求精！
如果您是以下情况，我们都能竭诚为您解决实际问题：【公司采用定金+余款的付款流程，以最大化保障您的利益，让您放心无忧】
1、在校期间，因各种原因未能顺利毕业，拿不到官方毕业证+微信95270640
2、面对父母的压力，希望尽快拿到奥塔哥理工学院奥塔哥理工学院毕业证学位证；
3、不清楚流程以及材料该如何准备奥塔哥理工学院奥塔哥理工学院毕业证学位证；
4、回国时间很长，忘记办理；
5、回国马上就要找工作，办给用人单位看；
6、企事业单位必须要求办理的；
面向美国乔治城大学毕业留学生提供以下服务:
【★奥塔哥理工学院奥塔哥理工学院毕业证学位证毕业证、成绩单等全套材料，从防伪到印刷，从水印到钢印烫金，与学校100%相同】
【★真实使馆认证（留学人员回国证明），使馆存档可通过大使馆查询确认】
【★真实教育部认证，教育部存档，教育部留服网站可查】
【★真实留信认证，留信网入库存档，可查奥塔哥理工学院奥塔哥理工学院毕业证学位证】
我们从事工作十余年的有着丰富经验的业务顾问，熟悉海外各国大学的学制及教育体系，并且以挂科生解决毕业材料不全问题为基础，为客户量身定制1对1方案，未能毕业的回国留学生成功搭建回国顺利发展所需的桥梁。我们一直努力以高品质的教育为起点，以诚信、专业、高效、创新作为一切的行动宗旨，始终把“诚信为主、质量为本、客户第一”作为我们全部工作的出发点和归宿点。同时为海内外留学生提供大学毕业证购买、补办成绩单及各类分数修改等服务；归国认证方面，提供《留信网入库》申请、《国外学历学位认证》申请以及真实学籍办理等服务，帮助众多莘莘学子实现了一个又一个梦想。
专业服务，请勿犹豫联系我
如果您真实毕业回国，对于学历认证无从下手，请联系我，我们免费帮您递交
诚招代理：本公司诚聘当地代理人员，如果你有业余时间，或者你有同学朋友需要，有兴趣就请联系我
你赢我赢，共创双赢
你做代理，可以帮助奥塔哥理工学院同学朋友
你做代理，可以拯救奥塔哥理工学院失足青年
你做代理，可以挽救奥塔哥理工学院一个个人才
你做代理，你将是别人人生奥塔哥理工学院的转折点
你做代理，可以改变自己，改变他人，给他人和自己一个机会顿时留恋起家乡的小河潺潺活水清凉无比日子就这样孤寂而快乐地过着寂寞之余山娃最神往最开心就是晚上无论多晚多累父亲总要携山娃出去兜风逛夜市流光溢彩人潮涌动的都市夜生活总让山娃目不暇接惊叹不已父亲老问山娃想买什么想吃什么山娃知道父亲赚钱很辛苦除了书籍和文具山娃啥也不要能牵着父亲的手满城闲逛他已心满意足了父亲连挑了三套童装叫山娃试穿山娃有点不想父亲说城里不比乡下要穿得漂漂亮亮爸怎么不穿得漂亮望着父亲山娃可
一比一原版(AUT毕业证)奥克兰理工大学毕业证成绩单如何办理
AUT毕业证【微信95270640】奥克兰理工大学毕业证购买,办理AUT成绩单,AUT毕业证制作【Q微信95270640】《奥克兰理工大学毕业证》，AUT毕业证购买，AUT学位证，奥克兰理工大学学位证《AUT成绩单制作》【AUT毕业证文凭 AUT本科 澳洲学历认证原版制作《diploma certificate degree transcript 》【留信网认证，本科，硕士，海归，博士，排名，成绩单】代办国外（海外）澳洲、韩国、加拿大、新西兰等各大学毕业证。 ?我们对海外大学及学院的毕业证成绩单所使用的材料，尺寸大小，防伪结构（包括：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。 文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）都有原版本文凭对照。
[留学文凭学历认证(留信认证使馆认证)奥克兰理工大学毕业证成绩单毕业证证书大学Offer请假条成绩单语言证书国际回国人员证明高仿教育部认证申请学校等一切高仿或者真实可查认证服务。
多年留学服务公司,拥有海外样板无数能完美1:1还原海外各国大学degreeDiplomaTranscripts等毕业材料。海外大学毕业材料都有哪些工艺呢？工艺难度主要由：烫金.钢印.底纹.水印.防伪光标.热敏防伪等等组成。而且我们每天都在更新海外文凭的样板以求所有同学都能享受到完美的品质服务。
国外毕业证学位证成绩单办理方法：
1客户提供办理奥克兰理工大学奥克兰理工大学毕业证成绩单信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
— — — — 我们是挂科和未毕业同学们的福音我们是实体公司精益求精的工艺！ — — — -
一真实留信认证的作用(私企外企荣誉的见证):
1：该专业认证可证明留学生真实留学身份同时对留学生所学专业等级给予评定。
2：国家专业人才认证中心颁发入库证书这个入网证书并且可以归档到地方。
3：凡是获得留信网入网的信息将会逐步更新到个人身份内将在公安部网内查询个人身份证信息后同步读取人才网入库信息。
4：个人职称评审加20分个人信誉贷款加10分。
5：在国家人才网主办的全国网络招聘大会中纳入资料供国家500强等高端企业选择人才。电总将小方桌搁在门口看书写作业有一次山娃坐在门口写作业写着写着竟伏在桌上睡着了迷迷糊糊中山娃似乎听到了父亲的脚步声当他晃晃悠悠站起来时才诧然发现一位衣衫破旧的妇女挎着一只硕大的蛇皮袋手里拎着长铁钩正站在门口朝黑色的屋内张望不好坏人小偷山娃一怔却也灵机一动立马仰起头双手拢在嘴边朝楼上大喊：“爸爸爸——有人找——那人一听朝山娃尴尬地笑笑悻悻地走了山娃立马“嘭的一声将铁门锁死心却咚咚地乱跳当山娃跟父亲有
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
学校原件一模一样【微信：741003700 】《(Exeter毕业证书)埃克塞特大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at Multifamily Properties by Kevin Donnelly
Kevin Donnelly gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
AadiShakti Projects ( Asp Cranes ) Raipur
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Skoda Octavia Rs for Sale Perth | Skoda Perth
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Digital Fleet Management - Why Your Business Need It?
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What do the symbols on vehicle dashboard mean?
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Case Study on Failure Product - Tata Nano
This is a detailed case study of Failure Product ( Tata Nano ).
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
AIS毕业证【微信95270640】《如何办理AIS毕业证奥克兰商学院文凭学历》【Q微信95270640】《奥克兰商学院文凭学历证书》《奥克兰商学院毕业证书与成绩单样本图片》毕业证书补办 Fake Degree做学费单《毕业证明信-推荐信》成绩单，录取通知书，Offer，在读证明，雅思托福成绩单，真实大使馆教育部认证，回国人员证明，留信网认证。网上存档永久可查！
如果您是以下情况，我们都能竭诚为您解决实际问题：【公司采用定金+余款的付款流程，以最大化保障您的利益，让您放心无忧】
1、在校期间，因各种原因未能顺利毕业，拿不到官方毕业证+微信95270640
2、面对父母的压力，希望尽快拿到奥克兰商学院奥克兰商学院毕业证学历书；
3、不清楚流程以及材料该如何准备奥克兰商学院奥克兰商学院毕业证学历书；
4、回国时间很长，忘记办理；
5、回国马上就要找工作，办给用人单位看；
6、企事业单位必须要求办理的；
面向美国乔治城大学毕业留学生提供以下服务:
【★奥克兰商学院奥克兰商学院毕业证学历书毕业证、成绩单等全套材料，从防伪到印刷，从水印到钢印烫金，与学校100%相同】
【★真实使馆认证（留学人员回国证明），使馆存档可通过大使馆查询确认】
【★真实教育部认证，教育部存档，教育部留服网站可查】
【★真实留信认证，留信网入库存档，可查奥克兰商学院奥克兰商学院毕业证学历书】
我们从事工作十余年的有着丰富经验的业务顾问，熟悉海外各国大学的学制及教育体系，并且以挂科生解决毕业材料不全问题为基础，为客户量身定制1对1方案，未能毕业的回国留学生成功搭建回国顺利发展所需的桥梁。我们一直努力以高品质的教育为起点，以诚信、专业、高效、创新作为一切的行动宗旨，始终把“诚信为主、质量为本、客户第一”作为我们全部工作的出发点和归宿点。同时为海内外留学生提供大学毕业证购买、补办成绩单及各类分数修改等服务；归国认证方面，提供《留信网入库》申请、《国外学历学位认证》申请以及真实学籍办理等服务，帮助众多莘莘学子实现了一个又一个梦想。
专业服务，请勿犹豫联系我
如果您真实毕业回国，对于学历认证无从下手，请联系我，我们免费帮您递交
诚招代理：本公司诚聘当地代理人员，如果你有业余时间，或者你有同学朋友需要，有兴趣就请联系我
你赢我赢，共创双赢
你做代理，可以帮助奥克兰商学院同学朋友
你做代理，可以拯救奥克兰商学院失足青年
你做代理，可以挽救奥克兰商学院一个个人才
你做代理，你将是别人人生奥克兰商学院的转折点
你做代理，可以改变自己，改变他人，给他人和自己一个机会的笑连连说记得记得但别忘了拿奖状进城啊考试一结束山娃就迫不及待地给父亲挂电话：爸我拿奖了三好学生接我进城吧父亲果然没有食言第二天就请假回家接山娃离开爷爷奶奶的那一刻山娃又伤心得泪如雨下宛如军人奔赴前线般难舍和悲壮卧空调大巴挤长蛇列车山娃发现车上挤满了叽叽喳喳的同龄人皆一脸惊喜地四处瞅山娃不认识他们也无暇去套近乎一味地跟着父亲昼夜兼程第二天凌晨就辗转到了父亲的城哇父亲的城真的好大好美哟走出广州火车方
一比一原版(UNITEC毕业证)UNITEC理工学院毕业证成绩单如何办理
UNITEC毕业证【微信95270640】☀《UNITEC理工学院毕业证购买》Q微信95270640《UNITEC毕业证模板办理》文凭、本科、硕士、研究生学历都可以做,《文凭UNITEC毕业证书原版制作UNITEC成绩单》《仿制UNITEC毕业证成绩单UNITEC理工学院学位证书pdf电子图》毕业证
全套服务：UNITEC理工学院UNITEC理工学院硕士毕业证成绩单真实回国人员证明 #真实教育部认证。让您回国发展信心十足#铸就十年品质！信誉！实体公司！可以视频看办公环境样板如需办理真实可查可以先到公司面谈勿轻信小中介黑作坊！
可以提供UNITEC理工学院钢印 #水印 #烫金 #激光防伪 #凹凸版 #最新版的毕业证 #百分之百让您绝对满意
印刷DHL快递毕业证 #成绩单7个工作日真实大使馆教育部认证1个月。为了达到高水准高效率
请您先以qq或微信的方式对我们的服务进行了解后如果有UNITEC理工学院UNITEC理工学院硕士毕业证成绩单帮助再进行电话咨询。
国外毕业证学位证成绩单如何办理：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作UNITEC理工学院毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。嘿嘿的笑连连说记得记得但别忘了拿奖状进城啊考试一结束山娃就迫不及待地给父亲挂电话：爸我拿奖了三好学生接我进城吧父亲果然没有食言第二天就请假回家接山娃离开爷爷奶奶的那一刻山娃又伤心得泪如雨下宛如军人奔赴前线般难舍和悲壮卧空调大巴挤长蛇列车山娃发现车上挤满了叽叽喳喳的同龄人皆一脸惊喜地四处瞅山娃不认识他们也无暇去套近乎一味地跟着父亲昼夜兼程第二天凌晨就辗转到了父亲的城哇父亲的城真的好大好美哟走出广州有
Recently uploaded (20)
final-slide-deck-ACURE-AQ-December-1-webinar-2022.pdf
final-slide-deck-ACURE-AQ-December-1-webinar-2022.pdf
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
EV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at Multifamily Properties by Kevin Donnelly
Digital Fleet Management - Why Your Business Need It?
Digital Fleet Management - Why Your Business Need It?
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
TTK #6
- 1. T.T.K # 6 CRANK’S PISTONS AND RINGS T.T.K # 6 CRANK’S PISTONS AND RINGS
- 4. T.T.K. #6T.T.K. #6 Basic crankshaft design
- 5. K. #6 K. #6 180° APART 720°÷ 4 =180°
- 9. t.t.k. #6 t.t.k. #6 Buick odd fire 90°block with common crank pins
- 11. T.T.K.#6T.T.K.#6 Even fire splayed 90°crankshaft
- 12. T.T.K. #6T.T.K. #6 More harmonic balancer stuff
- 13. T.T.K.#6T.T.K.#6
- 14. T.T.K.#6T.T.K.#6 Harmonic balancer in action
- 15. T.T.K.#6T.T.K.#6
- 17. CASTING
- 18. T.T.K.#6T.T.K.#6
- 19. High tech tool for checking crank journals T.T.K.#6T.T.K.#6
- 20. T.T.K.#6T.T.K.#6 We are all fairly familiar with this procedure by now!
- 22. Cracks are now evident after Magnaflux Proceedure T.T.K.#6T.T.K.#6
- 23. T.T.K.#6T.T.K.#6
- 27. T.T.K.#6T.T.K.#6
- 28. T.T.K.#6T.T.K.#6
- 29. T.T.K.#6T.T.K.#6
- 30. T.T.K.#6T.T.K.#6
- 31. T.T.K.#6T.T.K.#6
- 32. T.T.K.#6T.T.K.#6
- 34. T.T.K.#6T.T.K.#6
- 35. T.T.K.#6T.T.K.#6
- 36. T.T.K.#6T.T.K.#6
- 38. T.T.K.#6T.T.K.#6
- 40. T.T.K.#6T.T.K.#6 To much oil clearance can cause oil burning
- 41. T.T.K.#6T.T.K.#6
- 43. Piston Temp. top to bottom 550° 450° 350° 350° 300° 200° 275° T.T.K.#6T.T.K.#6
- 45. T.T.K.#6T.T.K.#6
- 47. T.T..K#6T.T..K#6 MORE STRUTS AND HEAT DAMS
- 52. Major and Minor thrust sides T.T.K.#6T.T.K.#6
- 53. T.T.K. #6 T.T.K. #6 Ford Motor Company: There are approximately 36,500 drops of oil in one quart. If the engine consumed as little as 1/1100 of a drop of oil on each stroke it would use one quart of oil in 1000 miles!!
- 56. T.T.K.#6T.T.K.#6
- 57. T.T.K.#6T.T.K.#6
- 62. T.T.K. #6 T.T.K. #6 THE OPENING OF THE KEEPER RING WILL ALWAYS GO DOWN
- 64. T.T.K.#6T.T.K.#6
- 71. Proper Balance Set Up T.T. K.# 6 T.T. K.# 6
- 72. T.T.K. #6 T.T.K. #6 ¼ oz.¼ oz. OF WEIGHT 4”OF WEIGHT 4” FROM THE CENTER OFFROM THE CENTER OF THE CRANKSHAFTTHE CRANKSHAFT TURNING 8000 RPM’STURNING 8000 RPM’S WILL CAUSE A FORCEWILL CAUSE A FORCE OF 114 POUNDS!!OF 114 POUNDS!!
- 74. T.T.K.# 6 T.T.K.# 6 Measuring Big End of the Rod
- 75. T.T.K. #6 T.T.K. #6 The New Hot Set-up
- 77. T.T.K. #6 T.T.K. #6 Balance Shafts may have their own Drive belts or chains
- 79. T.T.K. #6 T.T.K. #6 Proper directional force when needed
- 80. T.T.K. #6 T.T.K. #6 Opposing force when not needed