One of the additional discouraging image framing tasks to the unseasoned framer is that the actual mounting, or hinging, of the design onto the mounting board. The majority apprehends higher than to use Scotch tape, however on the far side that, the typical amateur is unsure concerning the way to properly suspend design and is usually overcome with the range of hinging merchandise offered. This text provides all the data necessary to hinge design.

1. Picture Frame Mounting Techniques
One of the additional discouraging image framing tasks to the unseasoned fr
framer is that the actual
mounting, or hinging, of the design onto the mounting board. The majority apprehends higher than to
use Scotch tape, however on the far side that, the typical amateur is unsure concerning the way to
properly suspend design and is usually overcome with the range of hinging merchandise offered. This
usually
text provides all the data necessary to hinge design.
There square measure many design hinging techniques / materials offered. We are going to cowl 3 of
the foremost well-liked, that square measure 1.hanging, 2.corners, and 3.strips. Usually quite one
liked,
strips.
technique works for a given project, whereas at different times one technique works best. Typically this
relies on the fabric the design is placed on, and therefore the geometric area offered among the image
frame package. For instance, rice paper, that is terribly light-weight, needs a special hinging material
light weight,
than a heavier canvas. Also, a frame with an oversized mat can have more room for hinging whereas one
while not a mat would require that the framer be alittle cleverer with concealing the hinge.
that

2. Some smart news: in contrast to once discussing matting, there isn’t extremely any conservation or pHvalue issues to form with the varied styles of hinging materials. This can be as a result of as long united is
buying from an honorable company like Linco or Filmoplast, all the hinging material are freed from
polymer (chemical compound sometimes derived from wood), and so safe to use on every type of
design.
Mounting Method #1: Hanging
If at all potential, the most effective methodology for mounting design is to connect it from its prime.
This effectively hangs (or vertically hinges) the design from its prime. Hanging it from the highest, as
hostile tape recording all sides, give the artwork room to contact and expand with change of humidity.
This prevents wrinkling within the frame. Anything is subject to changes in humidity like paper, canvas,
and rice paper all fall into this class.
Hinging material comes in two broad categories: tissue and tape. Both are cotton based and so acid free,
and are pressure sensitive adhesives. The adhesive is with chemicals stable and can not get brittle or
yellow over time. Hinging tissue is terribly delicate and can tear easily; white tape is stronger and
typically used a lot of typically. It’s called hinging tape because it's wont to make hinges, rather like door
hinges.
Hinging tissue is best used for terribly delicate, light-weight or semitransparent items like paper or
different works that require possessing the tape be invisible. The concept in conservation framing is to
use a hinging material that may tear a lot of simply than the design. This way, if the design is
anaesthetise any stress, the tape can tear before the design as a result of it's the weaker link. This
suggests that the glue within the hinging paper is activated once pressure is applied to the tissue. It’ll
hold most all papers, however not all. Sometimes, it should be necessary to double abreast of the paper
hinges to create them robust enough for heavier design. Simply make certain that the hinge is often the
weakest link which it breaks initialy.
Hinging tape may be a stronger various to hinging tissue. In fact, it's used far more typically once
hanging design as a result of the tissue is merely required for very delicate things. It serves 2 purposes:
to hinge the design to the mounting board and to hinge the window mat to mounting board. Figure one

3. shows this. It’s robust and acid-free (cotton based). It’s an unsmooth woven look It terribly robust and
look.
doesn't tear, however may be cut with scissors.
ver
The T-Hinge
The T-hinge may be a good all-purpose hanging method where one piece of tape is applied to
hinge
all purpose
the backside of the artwork and also the other crosses over the exposed tape perpendicularity and
ackside
attaches to the mounting board. This type of hinge is the most popular because it is simple and strong.
Its major disadvantage is that it can't be done if there's no matting offered, although this can be rarely
the case.
The V-Hinge
The V-hinge is somewhat a lot of complicated and needs a lot of lifting and handing of the
hinge
complicated
design. However, it is often used once there's not plenty of matting offered. The box can have directions
for a way to use it. A V-hinge is hid behind design thus it works well with glass frames that are gaining
hinge
some quality. And it permits for the edges of the design to show.

4. Mounting technique #2: Mounting Corners
Next on the list of hinging techniques are mounting corners. Mounting corners are used to mount design
that wants to be supported by all four corners. This includes things like images, documents, diplomas,
and certificates. Like hinging tape, mounting corners are safe on the design and straightforward to use.
They’re created with a non-yellowing acrylic adhesive and also the adhesive is pressure sensitive. An
excellent advantage over hinging tape is that the adhesive ne'er comes into contact with the design.
Their disadvantage is that since they support the design on all four sides, there's a risk of the design
folding and/or buckling because the paper expands and contracts with wetness changes over time.
There are 2 sorts of corners: people who are full and people that are sacred out.
Mounting technique #3: Mounting Strips
Mounting strips are items of adhesive plastic that have alittle non-adhesive lip. The image Frame Guys
sells FrameTek adhesive strips. These are applied by golf stroke the sticky aspect of the strip in grips with
the sides of the backing board. Within the frame package, the frame's lips can hide the strips. The aim of
strips is to avoid the design from coming back into contact with the glue. These are nice an excellent
choice wherever matting isn't desired, or on larger items that matting isn't offered (over 32" x 40#).
The above three methods of mounting will give you well in mounting artwork. If you have any queries or
would like to share your own project with us, please contact www.framemasters1969.com .