The document discusses the selection of a photo for a building project. Five potential photos are rejected for reasons such as poor framing, an awkward model position, a boring background, lack of focus, and unprofessional body language. Photo 6 is chosen because the model is positioned between an interesting door and brick wall, looks directly at the camera, and is framed closely to clearly show the model and clothing.

1. Photo Selection
Building Photo

2. Photo 1
I have chosen not to use this photo because the
framing in the photo is not good enough on the
model, the model is also too far away from the
camera. Even if I was to zoom into the photo,
the model would still be in an awkward position.

3. Photo 2
I have not chosen to use this photo because the
background is very boring and bland. The background
I was going for is a mix between the green door and
the brickwall, almost where it splits between the two
in the middle of the photo.

4. Picture 3
I have chosen not to use this photo because of the
framing within the photo, the model is supposed to be
in the centre of the image with only a little bit of the
background in the photo, this will allow the audience
too see the models outfit but also the model’s clothing
(and the models direct address).

5. Picture 4
I have chosen not to use this photo because there is
deep focus and the lighting makes half of the models
head lighter than the other side. The models boday
language does not really represent any kind of
professionalism within the photo.

6. Picture 5
I have chosen not to use this photo due to the
background being boring and bland. Also the body
language of the model is off and the model is almost
slanted.

7. Chosen Photo
I have chosen to use this photo because the
model is stood in between the door and the
brickwall, the model is giving direct address and
the model is in a close up, allowing the audience
to see the clothing and the model.