This document analyzes different platform concepts in the field of connected cars. It identifies platform types for connected cars through a qualitative study involving expert interviews and literature review. The document finds that original equipment manufacturers, suppliers, and IT companies have developed various connected car platform solutions with different business models, resulting in a complex platform landscape. It then classifies the range of observed connected car platform concepts based on generalized types defined by criteria from literature, including customer group, value proposition, participating actors, degree of openness, and barriers for other companies to participate.
PLM-17-Role of openness in industrial internet platform providers’ strategyKaran Menon
Paper presented in PLM 2017 Conference. Collaborators: Prof. Hannu Kärkkäinen (Tampere University of Technology, Finland) and Prof. Thorsten Wuest (West Virginia University, Finland)
When World's Collide - 'The Super-Six' strategic areas between the rail and c...Enda Casey
Delivering projects above, below, beside or on top of operational railways is traditionally seen as challenging. This rail and construction interface is often a source of project delivery issues. In December 2017, to help understand why, Mainguard Associates surveyed top practitioners in both rail and construction.
The survey identified the 'super-six', six key areas of challenge to effective rail and construction interfaces. These areas are:
1. Leadership & collaborative behaviours
2. Technical, Safety and Operations Understanding
3. Resources
4. Requirements
5. Complexity
6. Risk
The full survey results will be released as part of a white paper in Spring 2018. In the meantime, if you have any thoughts or questions on the rail/construction interface, please feel free to contact me via LinkedIn or at enda.casey@mainguardassociates.com.
AN OVERVIEW OF EXISTING FRAMEWORKS FOR INTEGRATING FRAGMENTED INFORMATION SYS...ijistjournal
Literatures show that there are several structured integration frameworks which emerged with the aim of facilitating pplication integration. But weakness and strength of these frameworks are not known. This
paper aimed at reviewing these frameworks with the focus on identifying their weakness and strength. Toaccomplish this, recommended comparison factors were identified and used to compare these frameworks.Findings shows that most of these structure frameworks are custom based on their motives. They focus onintegrating applications from different sectors within an organization for the purpose of eliminating communication inefficiencies. There is no framework which guides pplication’s integrators on goals of integrations, outcomes of integration, outputs of integration and skills which will be required for
types of applications expected to be integrated. The study recommended further study on integration
framework especial on designing unstructured framework which will support and guide application’s
integrators with consideration on consumer’s surrounding environment.
Suciu et al. The 15th International Conference on Informatics in Economy. Paper on. Dedicated Search Engines for Multimedia Big Data Indexing: Exalead Solutions
Offshore Engineering Development Center Engineering ServicesITC Infotech
This paper discusses various global sourcing
options that a company may consider and
further delves into providing a way to “rightsource”
to meet the engineering objectives
and the goals set
There are essential security considerations in the systems used by semiconductor companies like TI. Along
with other semiconductor companies, TI has recognized that IT security is highly crucial during web
application developers' system development life cycle (SDLC). The challenges faced by TI web developers
were consolidated via questionnaires starting with how risk management and secure coding can be
reinforced in SDLC; and how to achieve IT Security, PM and SDLC initiatives by developing a prototype
which was evaluated considering the aforementioned goals. This study aimed to practice NIST strategies
by integrating risk management checkpoints in the SDLC; enforce secure coding using static code analysis
tool by developing a prototype application mapped with IT Security goals, project management and SDLC
initiatives and evaluation of the impact of the proposed solution. This paper discussed how SecureTI was
able to satisfy IT Security requirements in the SDLC and PM phases.
E20 a supply and market analysis by G. Cattaneo and D. Bradshaw IDCKasia Szkuta
Presentation given at the "Enterprise 2.0 in Europe" workshop where the results of the interim report of the “Enterprise 2.0 study were presented and discussed with experts
Brussels, 14th of September 2010
PROPOSAL OF AN HYBRID METHODOLOGY FOR ONTOLOGY DEVELOPMENT BY EXTENDING THE P...ijitcs
W3C’s Semantic Web intents a common framework that allows data to be shared and reused across
application and enterprise. The semantic web and its related technologies are the main directions of
future web development where machine-processable information which supports user tasks. Ontologies are
playing the vital role in Semantic Web. Researches on Ontology engineering had pointed out that an effective
ontology application development methodology with integrated tool support is mandatory for its success. .
Potential benefits are there to ontology engineering in making the toolset of Model Driven Architecture
applicable to ontology modeling. Since Software and Ontology engineering are two complimentary
branches, the scope of extension of the well proven methodologies and UML based modeling approaches
used in software engineering to ontology engineering can bridge the gap between the engineering branches.
This research paper is an attempt to suggest an exclusive hybrid methodology for ontology development from
existing matured software engineering. Philosophical and engineering aspects of the newly derived
methodology have been described clearly An attempt has been made for the application of proposed
methodology with protégé editor. The full-fledged implementation of an domain ontology and its validation
is the future research direction.
PLM-17-Role of openness in industrial internet platform providers’ strategyKaran Menon
Paper presented in PLM 2017 Conference. Collaborators: Prof. Hannu Kärkkäinen (Tampere University of Technology, Finland) and Prof. Thorsten Wuest (West Virginia University, Finland)
When World's Collide - 'The Super-Six' strategic areas between the rail and c...Enda Casey
Delivering projects above, below, beside or on top of operational railways is traditionally seen as challenging. This rail and construction interface is often a source of project delivery issues. In December 2017, to help understand why, Mainguard Associates surveyed top practitioners in both rail and construction.
The survey identified the 'super-six', six key areas of challenge to effective rail and construction interfaces. These areas are:
1. Leadership & collaborative behaviours
2. Technical, Safety and Operations Understanding
3. Resources
4. Requirements
5. Complexity
6. Risk
The full survey results will be released as part of a white paper in Spring 2018. In the meantime, if you have any thoughts or questions on the rail/construction interface, please feel free to contact me via LinkedIn or at enda.casey@mainguardassociates.com.
AN OVERVIEW OF EXISTING FRAMEWORKS FOR INTEGRATING FRAGMENTED INFORMATION SYS...ijistjournal
Literatures show that there are several structured integration frameworks which emerged with the aim of facilitating pplication integration. But weakness and strength of these frameworks are not known. This
paper aimed at reviewing these frameworks with the focus on identifying their weakness and strength. Toaccomplish this, recommended comparison factors were identified and used to compare these frameworks.Findings shows that most of these structure frameworks are custom based on their motives. They focus onintegrating applications from different sectors within an organization for the purpose of eliminating communication inefficiencies. There is no framework which guides pplication’s integrators on goals of integrations, outcomes of integration, outputs of integration and skills which will be required for
types of applications expected to be integrated. The study recommended further study on integration
framework especial on designing unstructured framework which will support and guide application’s
integrators with consideration on consumer’s surrounding environment.
Suciu et al. The 15th International Conference on Informatics in Economy. Paper on. Dedicated Search Engines for Multimedia Big Data Indexing: Exalead Solutions
Offshore Engineering Development Center Engineering ServicesITC Infotech
This paper discusses various global sourcing
options that a company may consider and
further delves into providing a way to “rightsource”
to meet the engineering objectives
and the goals set
There are essential security considerations in the systems used by semiconductor companies like TI. Along
with other semiconductor companies, TI has recognized that IT security is highly crucial during web
application developers' system development life cycle (SDLC). The challenges faced by TI web developers
were consolidated via questionnaires starting with how risk management and secure coding can be
reinforced in SDLC; and how to achieve IT Security, PM and SDLC initiatives by developing a prototype
which was evaluated considering the aforementioned goals. This study aimed to practice NIST strategies
by integrating risk management checkpoints in the SDLC; enforce secure coding using static code analysis
tool by developing a prototype application mapped with IT Security goals, project management and SDLC
initiatives and evaluation of the impact of the proposed solution. This paper discussed how SecureTI was
able to satisfy IT Security requirements in the SDLC and PM phases.
E20 a supply and market analysis by G. Cattaneo and D. Bradshaw IDCKasia Szkuta
Presentation given at the "Enterprise 2.0 in Europe" workshop where the results of the interim report of the “Enterprise 2.0 study were presented and discussed with experts
Brussels, 14th of September 2010
PROPOSAL OF AN HYBRID METHODOLOGY FOR ONTOLOGY DEVELOPMENT BY EXTENDING THE P...ijitcs
W3C’s Semantic Web intents a common framework that allows data to be shared and reused across
application and enterprise. The semantic web and its related technologies are the main directions of
future web development where machine-processable information which supports user tasks. Ontologies are
playing the vital role in Semantic Web. Researches on Ontology engineering had pointed out that an effective
ontology application development methodology with integrated tool support is mandatory for its success. .
Potential benefits are there to ontology engineering in making the toolset of Model Driven Architecture
applicable to ontology modeling. Since Software and Ontology engineering are two complimentary
branches, the scope of extension of the well proven methodologies and UML based modeling approaches
used in software engineering to ontology engineering can bridge the gap between the engineering branches.
This research paper is an attempt to suggest an exclusive hybrid methodology for ontology development from
existing matured software engineering. Philosophical and engineering aspects of the newly derived
methodology have been described clearly An attempt has been made for the application of proposed
methodology with protégé editor. The full-fledged implementation of an domain ontology and its validation
is the future research direction.
PLM 2018 - Is Openness really free? A critical analysis of switching costs fo...Karan Menon
Paper Presentation in PLM 2018
Authors:
Karan Menon, Hannu Kärkkäinen, Thorsten Wuest & Timo Seppälä
Tampere University of Technology; West Virginia University; ETLA, Finland.
A multi channel system architecture for bankingIJCSEA Journal
Financial institutions have increased dependence upon the technology solutions that enable their financial products and services. The proliferation of Internet technologies, mobile devices, and competition from international commerce have placed increased pressure up banking and financial institutions to ensure that competitive leadership is maintained. A key challenge facing banking and finance is how to adopt the new Information and Communications Technologies (ICT) within the organization in a timely manner whilst not disrupting the embedded solutions that provide core banking capabilities to operate the business. In this paper we propose a multi-channel architecture for financial institutions such as banking. The architecture is based upon our industry experience in developing multi-channel solutions in similar industries and is refined further here based upon our experiences in banking. The proposed architecture may be used to facilitate decisions on how best to deploy new and emerging multi-channel technologies within the banking environment, providing a means for assessing how to ensure effective use of existing investments in systems and technologies. The solution may be used as a blueprint for banking institutions in developing their multi-channel strategies; addressing the incumbent, emerging, and future channels of banking distribution.
A MULTI-CHANNEL SYSTEM ARCHITECTURE FOR BANKINGIJCSEA Journal
This document proposes a multi-channel architecture for banking institutions to facilitate the adoption of new technologies while maintaining existing systems. The architecture supports both traditional channels like branches and ATMs as well as emerging channels like internet and mobile banking. It is based on the authors' industry experience and is intended to serve as a blueprint for financial institutions developing multi-channel strategies. The architecture layers customer devices, networks, channel applications, and a shared core banking system to provide a flexible way to integrate new technologies.
AN EMPIRICAL STUDY OF USING CLOUD-BASED SERVICES IN CAPSTONE PROJECT DEVELOPMENTcsandit
Cloud computing is gaining prominence and popularity in three important forms: Software as a Service, Platform as a Service, and Infrastructure as a Service. In this paper, we will present
an empirical study of how these cloud-based services were used in an undergraduate Computer Science capstone class to enable agile and effective development, testing, and deployment of sophisticated software systems, facilitate team collaborations among students, and ease the project assessment and grading tasks for teachers. Especially, in this class, students and teachers could leverage time, talent, and resources collaboratively and distributedly on his/her own schedule, from his/her convenient location, and using heterogeneous programming platforms thanks to such a completely All-In-Cloud environment, which eliminated the necessity of spending valuable development time on local setup, configuration, and maintenance, streamlined version control and group management, and greatly increased the collective productivity of student groups. Despite of the relatively steep learning curve in the beginning of the semester, all nine groups of students benefitted tremendously from such an All-In-Cloud experience and eight of them completed their substantial software projects successfully. This paper is concluded with a vision on expandin and standardizing the adoption of the Cloud ecosystem in other Computer Science classes in the future.
International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
Edge computing from standard to actual infrastructure deployment and software...DESMOND YUEN
Edge Computing is widely recognized as a key technology, supporting innovative services for a wide
ecosystem of companies, ranging from operators, infrastructure owners, technology leaders, application
and content providers, innovators, startups, etc.
The advent of 5G systems has also increased the attention to Edge Computing [1][2], as this technology
supports many of the most challenging 5G use cases, especially those for which high end-to-end (E2E)
performances are required. In fact, due to the presence of processing platforms and application
endpoints in close proximity to end-users, Edge Computing offers a low latency environment and
significant gains in terms of network bandwidth, which are key benefits for the deployment of 5G
networks
This three sentence summary provides the key details about the document:
This document proposes an integrated auction and market design method for parking space sharing and allocation using IoT technologies. It develops an IoT-enabled urban parking management cloud platform to share private parking spaces among drivers using a price-compatible top trading cycles and chains mechanism, and reallocate public parking spaces using a one-sided Vickrey-Clarke-Groves auction. Experimental results show the proposed mechanism achieves 20-30% system profitability and ex post budget balance for the platform.
1. Coordination across agencies - As threats evolve, the DHS will need to continue strengthening coordination between its various sub-agencies as well as other federal, state, and local partners.
2. Technology and information sharing - Advances in technology and the ability to share timely intelligence across organizations will be vital. The DHS must adapt to emerging technologies.
3. Addressing new and evolving threats - As threats change, the DHS needs flexibility to take on new responsibilities and tackle threats such as cybersecurity that have become more prominent.
Other issues
A methodology for model driven multiplatform mobile application developmentIAEME Publication
This document describes a methodology for developing mobile applications across multiple platforms using model-driven development. The methodology utilizes domain-specific modeling languages to define application logic, data structures, communication, and user interfaces in a platform-independent way. Model processors then generate executable code for different mobile platforms from these models. The generated code leverages platform-specific libraries and frameworks to optimize for energy efficiency on mobile devices. Some computation tasks are also offloaded to the cloud to further improve efficiency. The goal is to develop high-quality, energy-efficient mobile applications that can be maintained consistently across multiple platforms.
A methodology for model driven multiplatform mobile application developmentIAEME Publication
This document describes a methodology for developing mobile applications across multiple platforms using model-driven development. The methodology utilizes domain-specific modeling languages to define application logic, data structures, communication, and user interfaces in a platform-independent way. Model processors then generate executable code for different mobile platforms from these models. The generated code leverages platform-specific libraries and frameworks to optimize for energy efficiency on mobile devices. Some computation tasks are also offloaded to the cloud to further improve efficiency. The goal is to develop high-quality, energy-efficient mobile applications that can be maintained consistently across multiple platforms.
ENABLERS TO BOOST BLOCKCHAIN ADOPTION IN EUIJNSA Journal
This paper describes a framework to facilitate the adoption of the Blockchain technology and streamline the development of decentralised applications (DAPPs). It describes four enablers, as self-contained core modules, offering specific, key functionality using the Blockchain technology. The enabler functionality includes a) Blockchain-based ID management allowing for authentication and authorization, b) the storage of data in the IPFS distributed filesystem with guarantees of data integrity and authenticity, c) the trustworthy registration of entities, services, and bindings, d) the performance of trustworthy negotiations towards external marketplaces with the support of the Blockchain. The design and interactions of the enablers are described using sequence diagrams. The usage of the functionality provided by the enablers is also being evaluated. In parallel, we present the application of the Blockchain technology, mainly in the context of EU project Block.IS in three economic areas agriculture, finance, and logistics. We provide and discuss a digest of the decentralised applications designed and developed over a period of approximately 3 years (2019-2021). Key areas of interest, processes, workflows, and assets where Blockchain technology has been applied are described. Findings, in terms of Blockchain application, challenges and technical selections as well as third-party tools are also identified and discussed.
Continuity in the development of seamless mobility: An approach for a system-...IRJET Journal
This document discusses approaches to enable continuity and traceability in interdisciplinary product development for systems-of-systems (SoS) environments. It addresses the challenges of developing complex, interconnected systems where independent teams use various tools and methods.
The document presents three approaches: 1) A classification of four dimensions of continuity in product engineering to address consistency across levels of detail, temporal changes, different projects, and partial models. 2) The KaRDF and Vitruvius methods for consistently modeling heterogeneous development artifacts using semantic technologies. 3) A methodology based on SPALTEN problem-solving processes to support management of changes in distributed development.
Integrating these approaches would support distributed development of seamless mobility systems with high consistency
Multiagent multiobjective interaction game system for service provisoning veh...redpel dot com
Multiagent multiobjective interaction game system for service provisoning vehicular cloud
for more ieee paper / full abstract / implementation , just visit www.redpel.com
The document discusses the evolution of Energy Trading and Risk Management (ETRM) systems over the past 20 years. It highlights how newer ETRM solutions focus more on system architecture and design compared to older solutions. The document then summarizes Contigo's approach to ETRM system design, which emphasizes principles like modularity, integration capabilities, and a time-series data architecture to enable rapid implementation and flexibility.
ICT research in the context of European Union
CASE SUMMER SCHOOL ON APPLIED SOFTWARE ENGINEERING
APPLIED SOFTWARE PROCESS MANAGEMENT AND TESTING
JULY 6-10, 2009, BOZEN/BOLZANO, ITALY
The document discusses cloud computing technology and its potential to provide an innovative business model for companies by reducing costs and increasing scalability. However, the adoption rate of cloud computing has been slower than expected due to issues of vendor lock-in, where a lack of standardization among cloud providers leads to proprietary interfaces and services. This heterogeneity of cloud offerings can result in vendor lock-in scenarios that make it difficult for customers to switch providers. The document argues that open standards and interoperability between cloud platforms are needed to address vendor lock-in and accelerate the adoption of cloud computing.
http://assignment-partner.com/ .That's a sample paper - essay / paper on the topic "Information system infrastructure" created by our writers!
Disclaimer: The paper above have been completed for actual clients. We have acclaimed personal permission from the customers to post it.
IRJET - Survey Paper on Tools Used to Enhance User's Experience with Cons...IRJET Journal
The document discusses and compares different tools that can be used to develop cross-platform mobile applications for enhancing the user experience of consumer real estate applications. It analyzes native mobile development, hybrid applications, and compiled applications like React Native and Flutter. Key criteria for comparison include code reusability, ecosystem support, performance, and accessing native device features. The goal is to identify the best tools for implementing features like 3D walkthroughs, chatbots, and optical character recognition in a real estate mobile app.
Simulation Modelling Practice and Theory 47 (2014) 28–45Cont.docxedgar6wallace88877
Simulation Modelling Practice and Theory 47 (2014) 28–45
Contents lists available at ScienceDirect
Simulation Modelling Practice and Theory
j o u r n a l h o m e p a g e : w w w . e l s e v i e r . c o m / l o c a t e / s i m p a t
Insight Maker: A general-purpose tool for web-based modeling
& simulation
http://dx.doi.org/10.1016/j.simpat.2014.03.013
1569-190X/� 2014 The Author. Published by Elsevier B.V.
This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/3.0/).
E-mail address: [email protected]
1 The exact search query used was ‘’’modeling tool’’ OR ‘‘simulation tool’’’ in the Topic field.
Scott Fortmann-Roe
University of California, Berkeley, Department of Environmental Science, Policy, and Management, 130 Mulford Hall, Berkeley, CA 94720-3114, United States
a r t i c l e i n f o a b s t r a c t
Article history:
Received 29 April 2013
Received in revised form 23 March 2014
Accepted 26 March 2014
Available online 14 June 2014
Keywords:
Modeling
Simulation
Web-based technologies
System Dynamics
Agent-Based Modeling
A web-based, general-purpose simulation and modeling tool is presented in this paper. The
tool, Insight Maker, has been designed to make modeling and simulation accessible to a
wider audience of users. Insight Maker integrates three general modeling approaches –
System Dynamics, Agent-Based Modeling, and imperative programming – in a unified
modeling framework. The environment provides a graphical model construction interface
that is implemented purely in client-side code that runs on users’ machines. Advanced fea-
tures, such as model scripting and an optimization tool, are also described. Insight Maker,
under development for several years, has gained significant adoption with currently more
than 20,000 registered users. In addition to detailing the tool and its guiding philosophy,
this first paper on Insight Maker describes lessons learned from the development of a com-
plex web-based simulation and modeling tool.
� 2014 The Author. Published by Elsevier B.V. This is an open access article under the CC BY
license (http://creativecommons.org/licenses/by/3.0/).
1. Introduction
The field of modeling and simulation tools is diverse and emergent. General-purpose modeling tools (e.g. MATLAB’s
Simulink or the Modelica language [1]) sit beside highly focused and domain-specific applications (e.g. [2] for modeling
network control systems, [3] for simulating the behavior of wireless network routing protocols, or [4] for the simulation
and control of turbines). Interest in and published works on such tools has grown over time. The ISI Web of Knowledge
reports a substantial growth in papers published on modeling or simulation tools with 299 such papers published in the span
of 1985–1989, 1482 published from 1995 to 1999, and 3727 published from 2005 to 2009.1
For end-users, simulation and modeling tools are generally designed as executables to be run on a consumer operating
system such as W.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
PLM 2018 - Is Openness really free? A critical analysis of switching costs fo...Karan Menon
Paper Presentation in PLM 2018
Authors:
Karan Menon, Hannu Kärkkäinen, Thorsten Wuest & Timo Seppälä
Tampere University of Technology; West Virginia University; ETLA, Finland.
A multi channel system architecture for bankingIJCSEA Journal
Financial institutions have increased dependence upon the technology solutions that enable their financial products and services. The proliferation of Internet technologies, mobile devices, and competition from international commerce have placed increased pressure up banking and financial institutions to ensure that competitive leadership is maintained. A key challenge facing banking and finance is how to adopt the new Information and Communications Technologies (ICT) within the organization in a timely manner whilst not disrupting the embedded solutions that provide core banking capabilities to operate the business. In this paper we propose a multi-channel architecture for financial institutions such as banking. The architecture is based upon our industry experience in developing multi-channel solutions in similar industries and is refined further here based upon our experiences in banking. The proposed architecture may be used to facilitate decisions on how best to deploy new and emerging multi-channel technologies within the banking environment, providing a means for assessing how to ensure effective use of existing investments in systems and technologies. The solution may be used as a blueprint for banking institutions in developing their multi-channel strategies; addressing the incumbent, emerging, and future channels of banking distribution.
A MULTI-CHANNEL SYSTEM ARCHITECTURE FOR BANKINGIJCSEA Journal
This document proposes a multi-channel architecture for banking institutions to facilitate the adoption of new technologies while maintaining existing systems. The architecture supports both traditional channels like branches and ATMs as well as emerging channels like internet and mobile banking. It is based on the authors' industry experience and is intended to serve as a blueprint for financial institutions developing multi-channel strategies. The architecture layers customer devices, networks, channel applications, and a shared core banking system to provide a flexible way to integrate new technologies.
AN EMPIRICAL STUDY OF USING CLOUD-BASED SERVICES IN CAPSTONE PROJECT DEVELOPMENTcsandit
Cloud computing is gaining prominence and popularity in three important forms: Software as a Service, Platform as a Service, and Infrastructure as a Service. In this paper, we will present
an empirical study of how these cloud-based services were used in an undergraduate Computer Science capstone class to enable agile and effective development, testing, and deployment of sophisticated software systems, facilitate team collaborations among students, and ease the project assessment and grading tasks for teachers. Especially, in this class, students and teachers could leverage time, talent, and resources collaboratively and distributedly on his/her own schedule, from his/her convenient location, and using heterogeneous programming platforms thanks to such a completely All-In-Cloud environment, which eliminated the necessity of spending valuable development time on local setup, configuration, and maintenance, streamlined version control and group management, and greatly increased the collective productivity of student groups. Despite of the relatively steep learning curve in the beginning of the semester, all nine groups of students benefitted tremendously from such an All-In-Cloud experience and eight of them completed their substantial software projects successfully. This paper is concluded with a vision on expandin and standardizing the adoption of the Cloud ecosystem in other Computer Science classes in the future.
International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
Edge computing from standard to actual infrastructure deployment and software...DESMOND YUEN
Edge Computing is widely recognized as a key technology, supporting innovative services for a wide
ecosystem of companies, ranging from operators, infrastructure owners, technology leaders, application
and content providers, innovators, startups, etc.
The advent of 5G systems has also increased the attention to Edge Computing [1][2], as this technology
supports many of the most challenging 5G use cases, especially those for which high end-to-end (E2E)
performances are required. In fact, due to the presence of processing platforms and application
endpoints in close proximity to end-users, Edge Computing offers a low latency environment and
significant gains in terms of network bandwidth, which are key benefits for the deployment of 5G
networks
This three sentence summary provides the key details about the document:
This document proposes an integrated auction and market design method for parking space sharing and allocation using IoT technologies. It develops an IoT-enabled urban parking management cloud platform to share private parking spaces among drivers using a price-compatible top trading cycles and chains mechanism, and reallocate public parking spaces using a one-sided Vickrey-Clarke-Groves auction. Experimental results show the proposed mechanism achieves 20-30% system profitability and ex post budget balance for the platform.
1. Coordination across agencies - As threats evolve, the DHS will need to continue strengthening coordination between its various sub-agencies as well as other federal, state, and local partners.
2. Technology and information sharing - Advances in technology and the ability to share timely intelligence across organizations will be vital. The DHS must adapt to emerging technologies.
3. Addressing new and evolving threats - As threats change, the DHS needs flexibility to take on new responsibilities and tackle threats such as cybersecurity that have become more prominent.
Other issues
A methodology for model driven multiplatform mobile application developmentIAEME Publication
This document describes a methodology for developing mobile applications across multiple platforms using model-driven development. The methodology utilizes domain-specific modeling languages to define application logic, data structures, communication, and user interfaces in a platform-independent way. Model processors then generate executable code for different mobile platforms from these models. The generated code leverages platform-specific libraries and frameworks to optimize for energy efficiency on mobile devices. Some computation tasks are also offloaded to the cloud to further improve efficiency. The goal is to develop high-quality, energy-efficient mobile applications that can be maintained consistently across multiple platforms.
A methodology for model driven multiplatform mobile application developmentIAEME Publication
This document describes a methodology for developing mobile applications across multiple platforms using model-driven development. The methodology utilizes domain-specific modeling languages to define application logic, data structures, communication, and user interfaces in a platform-independent way. Model processors then generate executable code for different mobile platforms from these models. The generated code leverages platform-specific libraries and frameworks to optimize for energy efficiency on mobile devices. Some computation tasks are also offloaded to the cloud to further improve efficiency. The goal is to develop high-quality, energy-efficient mobile applications that can be maintained consistently across multiple platforms.
ENABLERS TO BOOST BLOCKCHAIN ADOPTION IN EUIJNSA Journal
This paper describes a framework to facilitate the adoption of the Blockchain technology and streamline the development of decentralised applications (DAPPs). It describes four enablers, as self-contained core modules, offering specific, key functionality using the Blockchain technology. The enabler functionality includes a) Blockchain-based ID management allowing for authentication and authorization, b) the storage of data in the IPFS distributed filesystem with guarantees of data integrity and authenticity, c) the trustworthy registration of entities, services, and bindings, d) the performance of trustworthy negotiations towards external marketplaces with the support of the Blockchain. The design and interactions of the enablers are described using sequence diagrams. The usage of the functionality provided by the enablers is also being evaluated. In parallel, we present the application of the Blockchain technology, mainly in the context of EU project Block.IS in three economic areas agriculture, finance, and logistics. We provide and discuss a digest of the decentralised applications designed and developed over a period of approximately 3 years (2019-2021). Key areas of interest, processes, workflows, and assets where Blockchain technology has been applied are described. Findings, in terms of Blockchain application, challenges and technical selections as well as third-party tools are also identified and discussed.
Continuity in the development of seamless mobility: An approach for a system-...IRJET Journal
This document discusses approaches to enable continuity and traceability in interdisciplinary product development for systems-of-systems (SoS) environments. It addresses the challenges of developing complex, interconnected systems where independent teams use various tools and methods.
The document presents three approaches: 1) A classification of four dimensions of continuity in product engineering to address consistency across levels of detail, temporal changes, different projects, and partial models. 2) The KaRDF and Vitruvius methods for consistently modeling heterogeneous development artifacts using semantic technologies. 3) A methodology based on SPALTEN problem-solving processes to support management of changes in distributed development.
Integrating these approaches would support distributed development of seamless mobility systems with high consistency
Multiagent multiobjective interaction game system for service provisoning veh...redpel dot com
Multiagent multiobjective interaction game system for service provisoning vehicular cloud
for more ieee paper / full abstract / implementation , just visit www.redpel.com
The document discusses the evolution of Energy Trading and Risk Management (ETRM) systems over the past 20 years. It highlights how newer ETRM solutions focus more on system architecture and design compared to older solutions. The document then summarizes Contigo's approach to ETRM system design, which emphasizes principles like modularity, integration capabilities, and a time-series data architecture to enable rapid implementation and flexibility.
ICT research in the context of European Union
CASE SUMMER SCHOOL ON APPLIED SOFTWARE ENGINEERING
APPLIED SOFTWARE PROCESS MANAGEMENT AND TESTING
JULY 6-10, 2009, BOZEN/BOLZANO, ITALY
The document discusses cloud computing technology and its potential to provide an innovative business model for companies by reducing costs and increasing scalability. However, the adoption rate of cloud computing has been slower than expected due to issues of vendor lock-in, where a lack of standardization among cloud providers leads to proprietary interfaces and services. This heterogeneity of cloud offerings can result in vendor lock-in scenarios that make it difficult for customers to switch providers. The document argues that open standards and interoperability between cloud platforms are needed to address vendor lock-in and accelerate the adoption of cloud computing.
http://assignment-partner.com/ .That's a sample paper - essay / paper on the topic "Information system infrastructure" created by our writers!
Disclaimer: The paper above have been completed for actual clients. We have acclaimed personal permission from the customers to post it.
IRJET - Survey Paper on Tools Used to Enhance User's Experience with Cons...IRJET Journal
The document discusses and compares different tools that can be used to develop cross-platform mobile applications for enhancing the user experience of consumer real estate applications. It analyzes native mobile development, hybrid applications, and compiled applications like React Native and Flutter. Key criteria for comparison include code reusability, ecosystem support, performance, and accessing native device features. The goal is to identify the best tools for implementing features like 3D walkthroughs, chatbots, and optical character recognition in a real estate mobile app.
Simulation Modelling Practice and Theory 47 (2014) 28–45Cont.docxedgar6wallace88877
Simulation Modelling Practice and Theory 47 (2014) 28–45
Contents lists available at ScienceDirect
Simulation Modelling Practice and Theory
j o u r n a l h o m e p a g e : w w w . e l s e v i e r . c o m / l o c a t e / s i m p a t
Insight Maker: A general-purpose tool for web-based modeling
& simulation
http://dx.doi.org/10.1016/j.simpat.2014.03.013
1569-190X/� 2014 The Author. Published by Elsevier B.V.
This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/3.0/).
E-mail address: [email protected]
1 The exact search query used was ‘’’modeling tool’’ OR ‘‘simulation tool’’’ in the Topic field.
Scott Fortmann-Roe
University of California, Berkeley, Department of Environmental Science, Policy, and Management, 130 Mulford Hall, Berkeley, CA 94720-3114, United States
a r t i c l e i n f o a b s t r a c t
Article history:
Received 29 April 2013
Received in revised form 23 March 2014
Accepted 26 March 2014
Available online 14 June 2014
Keywords:
Modeling
Simulation
Web-based technologies
System Dynamics
Agent-Based Modeling
A web-based, general-purpose simulation and modeling tool is presented in this paper. The
tool, Insight Maker, has been designed to make modeling and simulation accessible to a
wider audience of users. Insight Maker integrates three general modeling approaches –
System Dynamics, Agent-Based Modeling, and imperative programming – in a unified
modeling framework. The environment provides a graphical model construction interface
that is implemented purely in client-side code that runs on users’ machines. Advanced fea-
tures, such as model scripting and an optimization tool, are also described. Insight Maker,
under development for several years, has gained significant adoption with currently more
than 20,000 registered users. In addition to detailing the tool and its guiding philosophy,
this first paper on Insight Maker describes lessons learned from the development of a com-
plex web-based simulation and modeling tool.
� 2014 The Author. Published by Elsevier B.V. This is an open access article under the CC BY
license (http://creativecommons.org/licenses/by/3.0/).
1. Introduction
The field of modeling and simulation tools is diverse and emergent. General-purpose modeling tools (e.g. MATLAB’s
Simulink or the Modelica language [1]) sit beside highly focused and domain-specific applications (e.g. [2] for modeling
network control systems, [3] for simulating the behavior of wireless network routing protocols, or [4] for the simulation
and control of turbines). Interest in and published works on such tools has grown over time. The ISI Web of Knowledge
reports a substantial growth in papers published on modeling or simulation tools with 299 such papers published in the span
of 1985–1989, 1482 published from 1995 to 1999, and 3727 published from 2005 to 2009.1
For end-users, simulation and modeling tools are generally designed as executables to be run on a consumer operating
system such as W.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Paper02
1. Platforms and Ecosystems for Connected Car Services
Micha Bosler1
, Christopher Jud2
and Georg Herzwurm2
1
University of Stuttgart, Chair of General Business Administration, esp. Innovation & Service
Management, Keplerstr. 17, 70174 Stuttgart, Germany
micha.bosler@bwi.uni-stuttgart.de
2
University of Stuttgart, Chair of Information Systems II (Business Software), Keplerstr. 17,
70174 Stuttgart, Germany
{jud, herzwurm}@wius.bwi.uni-stuttgart.de
Abstract. Value-adding services are introduced in more and more industries.
Often such services are delivered by platforms as in the example of connected
cars. In this industry, a broad range of platforms appears to provide actors like
customers and owners of vehicles with services. Consequently, complex
ecosystems are developed around the connected vehicles. This article deals with
platform concepts in the mentioned area. A study with qualitative research
design identified different platform types for connected cars.
Keywords Connected Cars · Connected mobility · Platforms · Ecosystems
1 Introduction
Within the automotive industry, the digitalization effects a fundamental change
towards vehicles equipped with data connectivity. The resulting connected cars (CC)
are based on the integration of information technology and telecommunication
components into the vehicle architecture. This enables network functionalities and
allows the exchange of data and information over mobile networks. Consequently, the
mentioned digitalization ultimately transforms cars into cyber-physical systems:
virtual telematic features extend the primary mechanical and electronical capabilities
of the vehicles [1]. The described development enables novel digital services that
generate added value for customers. Needs for information and entertainment
complement the need for mobility in the car. These digital services are offered
through platforms. Next to the original equipment manufacturers (OEMs) also
suppliers, as well as IT companies, want to participate in the industry change and
pursue own platform offerings. Thereby, underlying concepts and business models
vary considerably between different actors, due to various initial situations. The
resulting heterogeneous platform landscape is intransparent.
Based on this complex situation, the aim of this paper is to analyze and
characterize connected car platforms. The research question, therefore, is: “What
state-of-the-art digital platform concepts in the field of the connected car can been
characterized and classified?”
IWSECO 2017 16
2. The developed classification of CC platforms organizes the range of platform
concepts based on generalized types and explains the different types as well as their
interaction in the superordinate ecosystem of CC. The used criteria to structure the
overserved object of study have been literature-based (on previous publications which
deal with general classifications of platforms and associated characteristics) of [2], [3]
and [4]: customer group, value proposition, participating actors, the degree of
openness, and entry barriers for complementors. An exploratory literature review in
the preparation of the research yield to results which have been very technical or
describe fundamental concepts regarding the CC. Especially platforms and the
emergence of ecosystems have been not analyzed in depth so far. Due to the
scientifically unexplored nature of connected cars, the authors chose a qualitative
research design including expert interviews with representatives from different
relevant connected car platforms. The paper is structured as follows: The next chapter
handles the theoretical foundations. Section 3 defines different platform concepts in
the field of connected cars and discusses interactions between the classified solutions.
Concluding, in the last chapter, the results are summed up and discussed as well as an
outlook is given.
2 Theoretical foundations and state of the art
The exchange of digital products and services often takes place on IT-platforms.
Therefore, platform concepts are an intensively studied object in the literature [2,5].
Tiwana et al. (2010) define a platform as the extensible base of a software-based
system that provides core functionality shared by modules as well as interfaces to the
interoperation of the components. A module is described by Tiwana et al. (2010) as
an add-on software subsystem that connects to the platform and provides additional
functionalities [5]. Examples for platform modules can be found in applications for
mobile operating systems or plug-ins for web browsers.
Sometimes, a module is offered by a complementor instead of the platform owner.
Complementors are external actors who don't operate an own platform but use a
different platform to distribute their developed complementary modules [2].
Researchers on platform-related phenomena identified complementors as an essential
factor for the success of a platform because they increase the available modules for
the platform users. Therefore, the number of complementary modules influences the
benefit of a platform for existing and potential end users (network effects).
Conversely, a large number of end users attracts more additional complementors to
join the platform [6]. From the perspective of the platform owner, the integration of
complementors promises an increasing growth of the platform through the mentioned
network effects. However, the participation of complementors varies from platform to
platform. At this point, the openness of a platform is a relevant criterion. The open
platform allows free access to any complementor, who acts within the guidelines.
Owners of a closed platform cooperate exclusively with selected complementors [7].
In the latter case, a platform access without invitation by the owner is excluded.
Within the business of connected cars, most platforms are closed. The platform
IWSECO 2017 17
3. owners decide on the offered services and the participated players. The design and
diversity of the existing platforms depend on the degree of maturity of an industry. If
an industry is still in the phase of development, the spectrum of different platforms is
very high. In mature industries, a relatively homogenous range of platforms can be
found. The emerging ecosystem surrounding the field of connected cars is
characterized by a considerable heterogeneity of platform concepts. OEMs, as well as
suppliers and IT-companies, developed platform-based solutions for connected car
services. Their various business models cause the complex platform landscape.
In scientific literature, new services and thus also platforms in the context of the
connected cars have been analyzed extremely cautious, besides to the high level of
relevance and current development in the field of this topic. For this reason, the
present paper investigates and classifies different concepts of CC platforms.
3 Types of platforms in Connected Car domain
The superordinate value proposition of connected cars relies on the implementation of
new digital services for the customer. This requires a suitable technical infrastructure
inside and outside the vehicle. Regarding the connectivity, most vehicles have a
communication module with integrated SIM cards. Also, a screen to display
connected car services is required in the car. Screen and belonging processor and
operating system constitute the so-called head-unit. A complex IT landscape with
backend servers as well as databases, that handle and store all car-specific or
customer-specific data work in the background of the platforms [8]. The described
infrastructure and equipment represent the technical requirements for the supply of
digital services through CC platforms. Being of great importance in practice but not
yet in scientific research, the mentioned platforms are considered as the main object
of investigation in this paper.
As already discussed above, the uncharted character of the field of study required
and authorized a qualitative research design. More precisely, the gain in knowledge in
this article is predicated primarily on the systematic analysis of expert interviews with
executives from different platform owners in the context of CC. Also, secondary data
like press releases, annual reports or official service descriptions were used as
additional information on the respective platforms. Comparable cases were included
in the investigation to confirm or adjust the findings.
For analysis of the different platforms, a multiple case setup has been used [9]. In a
first step, the platforms had been analyzed based on public available documents like
reports or guidelines to gain insights regarding the characteristics, technologies and
uses cases of different platforms. In a second step, semi-structured interviews have
been executed following the advice of Yin (2014) and Eisenhardt (1989) [9,10].
Potential interviewees have been contacted via two online platforms for professionals,
XING and LinkedIn, as well as via email. Based on the positive responses, a regional
reference of the research emerged focusing German OEMs as well as participants.
Nevertheless, all participants with the research worked for leading companies that
offered services and products for CC worldwide. For the interviews, a questionnaire
IWSECO 2017 18
4. has been developed and pre-tested with Ph.D. students to verify comprehensibility as
well as clarity. The interviews took in average 60 minutes. Six interviews had been
conducted in the course of the research. Applied data triangulation with multiple
sources of evidence (expert interviews an secondary data analysis) increased the
informative value of this research. For structuring the findings, we used literature-
based classification criteria extracted from respected platform research. Gawer
(2009), Thomas et al. (2014) and Gawer (2014) deal with general platform
classifications [3,11,12]. Comparing the studies, we developed a consensus on the
used classification criteria: level of analysis, stakeholders, value proposition, and
architecture. The level of analysis refers to the platform scope, whereas the
stakeholder criterion is divided into the customer group and other involved actors.
The platform scope and the interaction between the actors result in the creation of
value and hence in the value proposition of the platform. The latter is closely related
to the platform architecture, which determines the underlying formal structure. In
addition to the mentioned points, we added the criterion of openness, because the
degree of openness is essential concerning the integration of complementors. In this
context, we refer to the work of Benlian et al. (2015) [4].
Finally, the research design identified three alternative platform concepts which
currently dominate the ecosystem of CC. Those are platforms of OEMs, platforms for
smartphone integration and the "Platforms as a Service"-approach for CC (see table
1). The essential characteristics of each platform concept are described in the
following. In the next section interactions and relationships between the platform
concepts are discussed.
3.1 OEM platforms
The customer in person of the driver or owner of a CC deals initially with the OEM
platform. Many automotive OEMs operate own platforms to offer services for CC.
This is equally true for premium and medium-class as well as volume OEMs, who
primarily branded their solutions. Examples include Audi Connect, BMW
ConnectedDrive, Mercedes me connect, VW Car-Net or Porsche Car Connect. In
contrast, Tesla does not use a branding for his platform and services [13]. Platforms
of OEM aims to offer customers of CC additional value-adding services – both inside
and outside the car.
A common core of connected car services exists across the various OEMs. While
driving, the customer benefits from a wide range of infotainment applications like live
traffic, weather data, news or music streaming services. Further, applications for
mobile devices as well as web portals allow remote access via the mobile network
(for example open or lock the door) and relevant vehicle data (for example fluid level,
range or parking position). All those additional digital services improve the value for
customers. Also, the transfer of car data to the OEM increases customer safety. In
case of an accident, specific information are sent to the emergency call center of
OEM, and necessary actions like emergency call (eCall) or triggering a brake-down
service are triggered based on that information. Besides that, diagnosis based on
telematics data leads to an optimization of the maintenance of cars.
IWSECO 2017 19
5. The actuality of the topic leads to a highly competitive pressure. This requires a
permanent development and release of new services on the platforms. For some
services as well as new functionalities, software updates are necessary. To deliver
such updates, several alternatives are available for OEMs. The existing mobile radio
connection to cars enables a new way for upgrades. Particularly Tesla provides
updates using the cellular network to update the software of the car and deploy
additional services and functions over the air. Tesla even supplements the described
options with functionalities that go beyond the scope of digital services and relate to
the immediate driving behavior of the car. In case of the Model S, the OEM added
various driving assistance systems such as an automatic emergency brake or an
autopilot via over-the-air updates after-market launch. Besides the provision of
additional services, over-the-air updates offer options to fix failures and malfunction
in the software but also with systems of the car. Therefore, the digitalization of
vehicles avoids costly recalls. In the future, services based on car-to-X
communication will be an essential component of the OEM platforms. This means
that hazard situations registered by vehicle sensors (for example the end of a traffic
jam or obstacles on the road) are automatically reported to the backend. The platform
evaluates and aggregates such information and warns the following drivers at an early
stage via the head unit.
About the underlying architecture, OEM platforms according to [1] consist of
front-end and back-end areas. The front-end serves the interaction with the customer
and comprises the display unit in the cockpit, the smartphone application as well as a
web-portals. The backend refers to a complex IT infrastructure that implements the
handling of the services, the communication between vehicle and platform, the data
management and the data storage. Also, the back-end architecture needs interfaces to
cooperating partners like mobile radio providers for the provision of the Internet
connection in the vehicle or IT service providers. For a vibrant ecosystem,
complementors play an important role. In this context, two different roles for
complementors exist. Either they act as the content provider for in-car data (traffic,
wheater, etc.) or they deliver fully developed service respectively service bundles. In
latter case, the OEM outsources the service development. In general, the OEM as
platform owner decides which third parties are granted access to the ecosystem based
on legal cooperation agreements. Based on that circumstances, the platforms, as well
as the ecosystems emerging around them, are seen as closed ecosystems.
OEMs could earn additional revenues by selling CC services related to the
platforms as additional equipment for a certain premium. The customer usually has
several options to book service packages for an extra charge. Sometimes OEMs link
the availability of selected services to the availability of certain premium head-units.
As a result, platforms and the services partially generate additional exclusive values
for the premium head-units, which also need to be bought as additional equipment.
Convincing customers of benefits to investing in such additional equipment, free trial
phases are included in the car purchase. Although, the supply and price conception of
such additional equipment as well as services varies considerably between OEMs.
IWSECO 2017 20
6. 3.2 Integration of Smartphone Platforms in Connected Cars
Solutions for the integration of smartphones in CC aim to enable the driver to use his
smartphone in the car like through the built-in head-unit. This requires a connection
via USB-cable or Wi-Fi between the smartphone and the car. Android Auto from
Google as well as Apple's CarPlay are the most famous representatives in this area.
According to this, an expansion of smartphone ecosystems to the CC domain takes
place. Google and / or Apple in the role of the platform owner determine which
smartphone applications are unlocked for the use in cars. Then, the corresponding
developers receive necessary application programming interfaces to adapt
functionalities for the application in cars. The adjustments are necessary because of
restrictions for applications in cars like display applications in reduced form on
screens in the car to minimize driver's deflection. Also, animations are not allowed for
applications in cars to avoid the distraction of drivers. The use of CarPlay or Android
Auto in cars always requires the agreement of the OEM which decides about the
integration of the solutions provided by Google or Apple.
If the user activates the integration solutions by connecting its smartphone with the
car, the corresponding interface appears on the screen in the cockpit. Apps (on the
smartphone) which are certified by the platform owner (Apple or Google), can be
used through the head-unit. The platform owners as mentioned above are responsible
for the selection of applications as well as the design of the graphical user interface
(GUI) of the integration solution. The GUI of the platform of the respective OEM is
deactivated as long as the smartphone integration is active. The user therefore
controls, whether available platform modules such as navigation, music streaming, or
messages are used via the native platform provided by the OEM or via CarPlay
respectively Android Auto. Despite the substitutional nature, the smartphone
integration solutions of Apple and Google show an excellent availability among the
OEMs [14,15]. This is based on the need of customers demanding the smartphone
integration services and leads to pressure on the OEM to support such solutions.
However, the OEMs can offer the integration solutions like CarPlay and Android
Auto as additional equipment and thus benefit financially from the offerings. Car
brands from the lower price segment sometimes don't have the necessary resources
and capabilities to develop a platform, as participants of the interviews mentioned. In
this initial situation, it is possible to use the smartphone integration instead of own
platform solution.
3.3 Platform as a Service for Connected Cars
It's not necessary that OEMs develop the whole range of CC service portfolio by
themselfs. They have the option to obtain selected CC service from third-party
providers. Often, these providers operate own platform concepts for the delivery of
services across the OEM to the end user. Their business model can be denoted as
"Connected Car Platform as a Service" inspired from the terms used in cloud
computing. In this context, an OEM obtains third-party platforms which are white-
labeled, so the use of external platforms remains invisible to the customer. Some
IWSECO 2017 21
7. representatives of this approach also provide hardware and software required in the
car to use the service. This applies to companies such as QNX or Harman, which thus
act as a provider of entire service bundles. A suitable example for service platform
bundles without any dependencies is the INRIX OpenCar platform. The INRIX
solution just requires a head-unit including a web-browser in the car. Services from
INRIX are available via the web-browser, but the customer does not even notice the
use of services from a third-party provider because the solution is completely
integrated with the look and feel of the OEM platform.
The described "CC Platform as a Service"-approach focuses all OEMs who already
offer an own CC platform or intend to introduce CC services in the future. In the
future, two scenarios are likely regarding the use of such external service platforms:
Particularly for volume or small OEMs, the opportunities arise, instead of developing
own platforms, to obtain services platforms from third-party partners. On the other
hand, brands from the upper price segment are likely to rely on proprietary platform
solutions due to the strategic relevance of connected cars. They integrate selected
external services into the existing service portfolios of their platforms to extend the
range of services. Providers of the "Connected Car Platform as a Service" approach
also work with additional complementors like content providers. In case of the
OpenCar solution, INRIX follows a notable strategy regarding an open platform. First
of all, the platform owner offers self-developed complementary proprietary modules
like live traffic data or parking and fuel prices. Beyond that, every interested
developer can register on the platform and publish new services using a software
development kit (SDK). By keeping entry barriers for the complementors low, a
service ecosystem should be evolved [16]. The OEM in the role of the direct customer
decides for every available service – from INRIX or a registered developer – whether
this is taken into the vehicle.
3.4 Discussion
The three identified and classified concepts of platforms are not to be understood as
isolated concepts. In fact, they have supported, alternating or substituting
relationships to at least one other platform concept. The interdependent ecosystem of
CC results from the interaction of different platform concepts and their platform-
ecosystems [7]. The core of the emerging CC ecosystem, are platforms of OEMs. The
OEMs are responsible for the governance and security as well as legal defaults of
vehicles and thus decide, whether other platform-based solutions are integrated with
their cars (apart from the integration of necessary content providers). Smartphone
integration solutions like Car Play and Android Auto have a substitute relationship
regarding platforms of OEMs since the functional scope overlaps partially. On the
other hand, smartphone integration solutions also extend services offered to the
customer and the car brands gain additional revenues by additional equipment. For
example, BMW ConnectedDrive supports Apple CarPlay, but this service needs to be
obtained for a premium by customers and leads to additional revenues for BMW.
Mercedes-Benz claims a charge of costs for Android Auto and CarPlay. The
"Connected Car Platform as a Service" approach allows OEMs the integration of
IWSECO 2017 22
8. external developed services into the own platform. This indicates an alternating
relationship. Regarding interdependencies between the approach and the solutions for
smartphone integration solutions, no general statements can be made. For example,
Harman and QNX explicitly support CarPlay and Android Auto, while INRIX sees
the OpenCar Platform as a competing and substituting product to the offerings of
Apple and Google [17].
The explanations above represent the current state of the art of digital services in
the domain of CC. Regarding the dynamism of the market and the intensive efforts of
its stakeholders, the development will continue. We expect a consolidation of
platforms as well as new offerings. Therefore, the classification with the identified
platform concepts must be seen as the first generation of platforms in CC, which
forms the basis for following evolution stages. Until now, efforts of the OEMs have
focused mainly on offering functionalities and services in cars, which customers
already know from smartphones (for example music streaming, news, e-mail,
messages, calendar, or weather). With smartphone integration solutions like CarPlay
and Android Auto, however, a serious substitute for those services arises. According
to the expert interviewed, the tendency leads towards that customers prefer such
services by using the smartphone integration. For this reason, OEMs and their
complementors will need to focus on services for CC in the future, which are more
integrated into the automotive architecture and use among other sensor data of the car
as well as of its environment. Audi, BMW, and Daimler already joined a consortium
and established the "Open Location Platform" by HERE's data. Data from vehicle
sensors and systems are sent to the common platform, aggregated and analyzed to
detect hazardous situations or provide services like free parking lots roadside or
within car parks. The resulting information is provided to the other drivers by the
respective OEM platform. Maybe in the second generation, a further relevant platform
concept for cross-OEM cooperation emerge in the ecosystem of CC. Actors also
could cover several of the classified platform concepts. Google, for example,
announced to develop an own in-car system, similar to platforms of the OEM. Such a
platform would substitute platforms of OEMs completely. Nevertheless, OEMs need
to implement such substitutes in cars. Therefore, they are still gatekeeper of cars.
Depending on the pressure of the market or scenarios where Google establish
exclusive cooperation with automotive OEMs or offer own vehicles, the position of
OEM may be attacked.
Also, completely new scenarios appear around cars which drive autonomous and
the driver no longer has to concentrate on the road. In this case, the full attention of all
passengers is available for the connected car services during the whole trip. To give
an example, the "driver" could join a business video conference using the head-unit
while the car navigates autonomously.
4 Conclusion, Implications and Outlook
The digitization of the cars is a megatrend in the automotive industry. OEMs,
suppliers and new players like Google and Apple participate in the development of
IWSECO 2017 23
9. platform-based digital services for connected vehicles. Consequently, the ecosystems
surrounding the connected cars appears heterogeneous and highly fragmented. This
article contributes to the structure of the non-transparent ecosystem of platforms in
CC. With the practiced qualitative research design, three important platform concepts
have been identified and characterized. As described above the development will
continue. Despite the upcoming changes, it can be expected, that the identified
platform concepts will continue to play an important role. However, the interviewed
experts assumed a consolidation that will occur in the next years, thus reducing the
number of platforms and maybe also platform concepts.
Based on the findings, managerial implications, as well as starting points for
further research, can be derived. Up to now, OEMs are the dominating factor in the
outlined ecosystem in CC. Currently, OEMs decide which digital services are offered
to the customer in cars as well as which partners participate in development and
offering of unique services and solutions. However, the power and influence of
Google and Apple in the automotive industry are increasing. The thought whether
OEM will continue to play such a prominent role in the future is justified. It seems to
be likely that other platform operators gain significant impact and take the position of
the OEMs of today, towards the contact and interaction with the customer. Further
research could investigate, which core competencies are necessary to the success in a
fully digitalized automotive industry.
For OEMs, we recommend a connected car strategy which is not limited to the
imitation of existing smartphone functionalities. OEMs should focus on the
development of services using sensor data that Google and Apple cannot cover with
their (current) platforms. At the same time, the industry is also responsible for
considering increasing traffic safety with certain services or optimize traffic flow by,
e.g., communicating with traffic lights and inform the driver to adapt speed to avoid a
stop. Such services are already in development by BMW or AUDI. Also, it is
important to note that with the introduction of new services, the complexity of the
ecosystem will inevitably increase. This creates, even more, challenges to operate the
platforms and their services as well as to guarantee the related cyber-security of the
vehicles. If the complexity cannot be handled, customer satisfaction will be reduced.
But not just customers of services need to be in focus, equally important are
complementors, which in turn influence the platform value. It must be considered,
that the platform of a single OEM has very limited number of cars. Compared to the
range of mobile operating systems like iOS and Android with hundreds of millions of
devices, the number of vehicles equipped with connectivity functionalities of a single
car manufacturer represents a huge disadvantage. The lower the number of devices
(and therefore the user), the more the profitability of platform memberships are
questioned by complementors. Despite this, a complementors access to every closed
OEM platform requires new development activities. Different requirements and
several systems architectures need to be accommodated. From complementors, it
seems more attractive to use smartphone integration solutions to offer their services
on the head-unit of cars; despite the risk to depend on the platform operators Apple
and Google. Regarding the INRIX OpenCar solution, a promising alternative is
already available, that is not restricted to an OEM. The approach of INRIX relies on a
IWSECO 2017 24
10. OEM-spanning cloud platform that offers services. The services can be chosen and
integrated into cars based on requirements of OEMs. If the OEMs don't want to use
this existing solution, they should jointly develop own industry standards, which
allow complementors a fast platform entry and offering of services across several
platforms of OEMs.
Regarding the findings of former platform and ecosystems research, we
recommend opening platform boundaries to exploit their potentials. In principle, the
more actors act on a platform, the higher is the value for all participants, as already
discussed in the literature of two-sided markets. Furthermore, we advise OEMs to join
consortia and cooperation like the HERE Open Location Platform to establish OEM-
spanning standards whereby the number of users is not limited to one automotive
brand. Also, the ecosystem like in CC needs further investigation. As described
above, with OEMs in the field of CC, different alternatives of platforms can be
integrated with their ecosystems. So far, such concepts are still under-investigated in
current research in this field.
References
1. Schäfer T., Jud C., Mikusz M.: Plattform-Ökosysteme im Bereich der intelligent
vernetzten Mobilität: Eine Geschäftsmodellanalyse. HMD Prax Wirtschaftsinform 52(3),
pp. 386–-400 (2015)
2. Gawer A., Cusumano M.A.: Industry platforms and ecosystem innovation. J Prod Innov
Manag 31(3), pp. 417-433 (2014)
3. Thomas LDW, Autio E, Gann DM.: Architectural leverage, putting platforms in context.
Acad ManagPerspect 28(2), pp. 198-–219 (2014)
4. Benlian A, Hilkert D, Hess T.: How open is this platform? The meaning and measurement
of platform openness from the complementors’ perspective. J Inf Technol 30(S3), pp. 209-
228 (2015)
5. Tiwana A., Konsynski B., Bush A.A.: Research commentary – platform evolution,
coevolution of platform architecture, governance, and environmental dynamics. Inf Syst
Res 21(4), pp. 675-–687 (2010)
6. Tiwana A.: Platform Ecosystems, Aligning Architecture, Governance, and Strategy.
Morgan Kaufmann, Amsterdam Waltham (2014)
7. Ceccagnoli M., Forman C., Huang P., Wu D.J.: Cocreation of value in a platform
ecosystem: the case of enterprise software. MISQ 36(1), pp. 263--290 (2012)
8. Johanning V., Mildner R.: Car IT kompakt, Das Auto der Zukunft – Vernetzt und
autonom fahren. Springer, Wiesbaden (2015)
9. Yin, R. K.: Case Study Research. vol. 5, SAGE Publications, Thousand Oaks (2014)
10. Eisenhardt, K. M.: Building Theories from Case Study Research. Academy of
Management Review 14 (4), pp. 532-550. Academy of Management, Briarcliff Manor
(1989)
11. Gawer, A.: Platform dynamics and strategies: from products to services. In: Gawer, A.:
Platforms, Markets and Innovation, pp. 45-76. Edward Elgar Publishing, Northampton
(2009)
12. Gawer, A.: Bridging differing perspectives on technological platforms. Research Policy 43
(7), pp. 1239-1249. Elsevier, Kidlington (2014)
IWSECO 2017 25
11. 13. Andersen, M.; Dauner, T.; Lang, N.; Palme, T.: What Automakers Can Learn from the
Tesla Phenomenon. BCG Perspectives. URL:
https://www.bcgperspectives.com/content/articles/automotive-what-automakers-can-learn-
from-tesla-phenomenon/ Accessed: 17/11/2017
14. Android: Android Auto. https://www.android.com/intl/en_us/auto/. Accessed: 17/11/2017
(2017)
15. Apple: CarPlay – Available Models. https://www.apple.com/ios/carplay/available-
models/. Accessed: 17/11/2017 (2017)
16. INRIX: INRIX acquires OpenCar to challenge Apple and Google in the car.
http://inrix.com/press-releases/opencar. Accessed: 17/11/2017 (2016)
17. HERE: HERE unveils next generation real-time data services for automotive industry.
https://www.here.com/en/company/newsroom/press-releases/2017-10-01-58. Accessed:
17/11/2017 (2016).
IWSECO 2017 26
12. Table 1. Classification of platform types for the CC
Platform type criterion Platforms of OEM Smartphone Integration CC Platform as a Service
Level of Analysis Ecosystem around the CC Ecosystem around smartphone & CC Ecosystem around the CC
Customer Group Buyer, driver and owner of the vehicles Driver or occupant with smartphone & OEM OEM
Value Proposition
Smart services as added value for customers: remote access
to the vehicle, optimized maintenance, a wide range of
infotainment applications; in the future, over-the-air updates
and car-to-X services are an increased objective of the
manufacturers: Revenue by additional equipment based on
such value-adding services
Use of selected smartphone applications during driving
(reduced surface and interactions with driver). Objective:
Integration of smartphones and related platforms in CC Selected services or the complete Connected-Car portfolio
provided by third party providers.
Objective: Alternative to the self-development of the services
(by OEMs)
Actors
Platform operators, customer (owner / driver), supporting IT
service providers, mobile communications providers, operator
of smartphone-integration-solutions, content providers or
complementers, developers of third party systems (like CC
Platform as a Service)
Platform operators (operators of mobile operating systems),
smartphone users (drivers / occupants), OEMs, developers
(complementors) of smartphone applications
Platform operators, OEMs (B-2-B customers), complementers
(developers), owners and drivers of cars as users of the
services
Components of Architecture
Frontend (Head-Unit, Webportal, Smartphone-Application),
Backend infrastructure, interfaces towards supporting or
additional actors, services or platforms
Smartphone including operating system, Head-Unit in the car
(frontend of B2C-Plattform) & interface, technology for
implemetation
Cloud-Infrastructure, developer tools for complementors, HMI
layer for OEMs, Head-Unit including Webbrowser, interfaces
between actors
Degree of Openness
Closed, meaning no free access for third parties; open for
selected cooperation partners (especially content providers,
chosen by OEM)
Open or limited open for developers of applications (from
smartphone ecosystem)
Closed or open, depending on Platform & Strategy
Entry Barriers for
Complements
Approval by the platform operator; Criteria: Best quality, lowest
price respectively specific demand of end users
Platform operators decide which smartphone apps are
unlocked for the integration in the CC
In case of an open platform: compliance to policies (what
services offered are defined by OEMs)
Example(s) Audi Connect, BMW ConnectedDrive, Mercedes me connect Apple CarPlay, Google Android Auto INRIX OpenCar
IWSECO 2017 27