OPTICALFIBERTRANSMISSION LINK .pdf
•
0 likes•1 view
Kunal Saha is a 5th semester student with university roll number 10505522018 studying Optical Instrumentation in the AEIE department. His class roll number is 09 and the subject is Optical Fiber Transmission Link. Optical transmission employs modulated monochromatic light to carry information from transmitter to receiver over the wide light spectrum from far infrared to near ultraviolet. Propagating at such high frequencies, optical wavelengths are well-suited for high-rate broadband telecommunication.
Report
Share
Report
Share
Download to read offline
Recommended
EM spectrum applications, Electromagnetic Wave Theory
The document discusses various parts of the electromagnetic spectrum including radio waves, infrared, ultraviolet, visible light, x-rays, and gamma rays. It provides details on the wavelength ranges and common applications of each type of electromagnetic radiation. Examples of applications discussed include GPS, FM/AM radio, TV broadcasting, microwave ovens, MRI, radar, RFID, and radio telescopes. Harmful effects of electromagnetic radiation generally increase with higher frequency and energy.
Ch 1 microwave fundamentals
This document discusses microwaves and electromagnetic radiation. It defines microwaves as electromagnetic waves with frequencies between 500 MHz and 300 GHz. Microwaves are used for communication, radar, and heating. The document also discusses the electromagnetic spectrum and different types of electromagnetic radiation such as visible light, infrared, ultraviolet, x-rays, and radio waves. It notes hazards of electromagnetic radiation to personnel, ordnance, and fuel.
Microwaves.pptx
Microwaves are a form of electromagnetic radiation with wavelengths ranging from about 1 meter to 1 millimeter. They occupy the part of the electromagnetic spectrum between radio waves and infrared light. Microwaves are used for communication via line-of-sight paths like point-to-point links, wireless networks, and spacecraft communication. They are also used for applications like radar, remote sensing, industrial heating, and microwave ovens.
Microwave bani
The document provides information about microwave technology including definitions, generation, applications, transmission, and uses of microwaves. It discusses how microwaves have wavelengths between 1-30 cm and frequencies between 1-100 GHz. Key applications mentioned include radar, communications, radiometry, and cooking food in microwave ovens. Microwave transmission uses line-of-sight propagation through methods like waveguides, transmission lines, and radiation/reception with horns and reflectors.
Microwave radio link design
This document provides information about designing a microwave link between two sites in Pakistan for a semester project. It includes:
1) Details of the two sites and student information.
2) An introduction explaining microwave radio relay technology and how it is used to transmit signals over long distances using line-of-sight paths.
3) Technical explanations of key concepts in microwave communication systems like frequency, wavelength, free space loss, antenna gain, and how they relate to designing an optimal microwave link.
Transmission media
Transmission media are the means by which data is transmitted over long distances. Common transmission media include guided media like coaxial cable, twisted pair cable, and fiber optic cable as well as unguided or wireless media that transmit signals through air like radio waves, microwaves, and infrared. Each type of transmission medium has its own characteristics and applications. For example, coaxial cable provides good bandwidth and noise immunity but is more expensive than twisted pair cable. Fiber optic cable has the highest bandwidth but requires specialized equipment. Wireless transmission uses electromagnetic signals of varying frequencies that propagate through the air. [/SUMMARY]
OPTICAL COMMUNICATION
The document discusses optical communication and fiber optic communication systems. It defines optical communication as using light to carry information over distances. The most common wavelengths used fall between 0.83-1.55 microns. Optical communication can be analog or digital. Fiber optic communication uses total internal reflection to transmit pulses of light through optical fibers to carry digital data. A fiber optic system includes a transmitter that converts electrical signals to light pulses and a receiver that converts the light pulses back to electrical signals.
0 lecture 2 wp wireless protocol
This document discusses radio spectrum and wireless networks and protocols. It covers:
- The radio spectrum ranges from 30 Hertz to 300 GHz and is used for technologies like mobile phones, radio, TV and more.
- The spectrum is divided into bands and sub-bands to prevent interference between users.
- Shannon's theorem establishes the maximum possible transmission speed over a channel based on its bandwidth and signal-to-noise ratio.
- Licensed spectrum reserves certain frequencies that individual companies can pay to use exclusively, while unlicensed spectrum allows open use but is more vulnerable to interference.
Recommended
EM spectrum applications, Electromagnetic Wave Theory
The document discusses various parts of the electromagnetic spectrum including radio waves, infrared, ultraviolet, visible light, x-rays, and gamma rays. It provides details on the wavelength ranges and common applications of each type of electromagnetic radiation. Examples of applications discussed include GPS, FM/AM radio, TV broadcasting, microwave ovens, MRI, radar, RFID, and radio telescopes. Harmful effects of electromagnetic radiation generally increase with higher frequency and energy.
Ch 1 microwave fundamentals
This document discusses microwaves and electromagnetic radiation. It defines microwaves as electromagnetic waves with frequencies between 500 MHz and 300 GHz. Microwaves are used for communication, radar, and heating. The document also discusses the electromagnetic spectrum and different types of electromagnetic radiation such as visible light, infrared, ultraviolet, x-rays, and radio waves. It notes hazards of electromagnetic radiation to personnel, ordnance, and fuel.
Microwaves.pptx
Microwaves are a form of electromagnetic radiation with wavelengths ranging from about 1 meter to 1 millimeter. They occupy the part of the electromagnetic spectrum between radio waves and infrared light. Microwaves are used for communication via line-of-sight paths like point-to-point links, wireless networks, and spacecraft communication. They are also used for applications like radar, remote sensing, industrial heating, and microwave ovens.
Microwave bani
The document provides information about microwave technology including definitions, generation, applications, transmission, and uses of microwaves. It discusses how microwaves have wavelengths between 1-30 cm and frequencies between 1-100 GHz. Key applications mentioned include radar, communications, radiometry, and cooking food in microwave ovens. Microwave transmission uses line-of-sight propagation through methods like waveguides, transmission lines, and radiation/reception with horns and reflectors.
Microwave radio link design
This document provides information about designing a microwave link between two sites in Pakistan for a semester project. It includes:
1) Details of the two sites and student information.
2) An introduction explaining microwave radio relay technology and how it is used to transmit signals over long distances using line-of-sight paths.
3) Technical explanations of key concepts in microwave communication systems like frequency, wavelength, free space loss, antenna gain, and how they relate to designing an optimal microwave link.
Transmission media
Transmission media are the means by which data is transmitted over long distances. Common transmission media include guided media like coaxial cable, twisted pair cable, and fiber optic cable as well as unguided or wireless media that transmit signals through air like radio waves, microwaves, and infrared. Each type of transmission medium has its own characteristics and applications. For example, coaxial cable provides good bandwidth and noise immunity but is more expensive than twisted pair cable. Fiber optic cable has the highest bandwidth but requires specialized equipment. Wireless transmission uses electromagnetic signals of varying frequencies that propagate through the air. [/SUMMARY]
OPTICAL COMMUNICATION
The document discusses optical communication and fiber optic communication systems. It defines optical communication as using light to carry information over distances. The most common wavelengths used fall between 0.83-1.55 microns. Optical communication can be analog or digital. Fiber optic communication uses total internal reflection to transmit pulses of light through optical fibers to carry digital data. A fiber optic system includes a transmitter that converts electrical signals to light pulses and a receiver that converts the light pulses back to electrical signals.
0 lecture 2 wp wireless protocol
This document discusses radio spectrum and wireless networks and protocols. It covers:
- The radio spectrum ranges from 30 Hertz to 300 GHz and is used for technologies like mobile phones, radio, TV and more.
- The spectrum is divided into bands and sub-bands to prevent interference between users.
- Shannon's theorem establishes the maximum possible transmission speed over a channel based on its bandwidth and signal-to-noise ratio.
- Licensed spectrum reserves certain frequencies that individual companies can pay to use exclusively, while unlicensed spectrum allows open use but is more vulnerable to interference.
9228e5ae8d984678aad8b1d3c8db3b46-compressed-46e3765ce750dd47728ed198f4d5d88c-...
This document discusses different frequency ranges used in electronic communication systems:
- Voice frequencies range from 300-3000 Hz for normal human speech.
- Very low frequencies range from 9 kHz to 30 kHz and are used for some government/military communication and musical instruments.
- Low frequencies from 30-300 kHz are used for aeronautical and marine navigation.
- Medium frequencies from 300 kHz to 3 MHz are used for AM radio broadcasting.
- The document then discusses high, very high, ultrahigh, microwave, and extremely high frequency ranges and their common uses.
Radio communication
This presentation provides an overview of radio communication. It discusses the history of radio from Maxwell's electromagnetic theory to modern innovations. It then covers key topics like classification of radio waves, modulation techniques, transmitter and receiver components, common uses, and future technologies like cognitive radio networks. The presentation aims to explain the basic mechanisms and applications of radio communication over the last hundred years.
BW and spectrum
The document discusses the electromagnetic spectrum, which encompasses all frequencies of electromagnetic signals. It describes how frequency and wavelength relate, with frequency being measured in cycles per second and wavelength being the distance between cycles. The spectrum is divided into segments including radio frequencies, microwaves, infrared, visible light, ultraviolet, and more. Managing bandwidth and developing standards help maximize the efficient use of the limited available spectrum.
Microwave agdon
Microwave transmission refers to using radio waves between 1-30 GHz to transmit information or power. Microwaves are well-suited for point-to-point wireless communication because their short wavelengths allow for directional antennas that do not interfere with nearby equipment using the same frequencies. Microwaves also provide a very large information-carrying capacity. Common uses of microwaves include wireless communication systems, radar, satellite communications, and radio astronomy. Sources of microwaves include vacuum tube devices, solid-state devices, and natural sources like the sun and cosmic microwave background radiation.
Wireless communication by waves
This is one of the presentation of Data Communication.Our teacher asked us on which topic (sector) of data communication will u work ?And we decided to work how waves affect on wireless communication or"Impact of waves on Wireless Communication" communication".
Radio Frequency Waves ,Data communication & Networks
Radio waves are electromagnetic waves that propagate through free space. They have a wavelength between 1mm and 30km and a frequency between 10KHz and 300GHz. Information such as sound and images can be transmitted using radio waves by modifying properties of the wave like its amplitude or frequency. Radio waves can propagate through different modes including ground waves, sky waves, and line-of-sight. Various factors can impair radio wave transmission over long distances including attenuation, noise, multipath propagation, and refraction in the atmosphere. Radio waves are generated by oscillating electric and magnetic fields produced by accelerating charges and can encode both analog and digital information.
01_AME_U1_INTRODUCTION AND MICROWAVE FREQUENCY BANDS.pptx
UNIT I introduces microwave systems and antennas. It discusses microwave frequency bands from 1 GHz to 300 GHz and key antenna concepts like near and far fields, gain, efficiency, impedance matching, and the Friis transmission equation. The unit also covers antenna pattern characteristics, radiated power and fields, and antenna noise temperature.
UNIT I provides an overview of key topics in microwave engineering and antenna fundamentals, including microwave frequency bands, antenna radiation mechanisms, near and far-field regions, antenna parameters like gain and pattern characteristics, impedance matching concepts, and noise modeling of microwave systems.
Microwave rizwan
This document discusses microwave technology and microwave transmission. Some key points:
- Microwaves have wavelengths between 1 mm to 1 m, with frequencies between 300 MHz to 300 GHz. They are used for point-to-point communication through directed beams.
- Microwave transmission does not require wires and is used for communications, including satellite and cellular networks. It has a large bandwidth but is limited by line of sight.
- Microwave radio relay is used to transmit signals between two locations using directional antennas in a line of sight path. It was widely used historically but fiber optic cable is now more common.
Ofc
This document provides an overview of optical fiber communication (OFC). It begins with the historical development and need for optical systems due to limitations of traditional communication methods. The basics of OFC are explained, including the system block diagram and principles of operation using ray theory and total internal reflection. Different types of optical fibers are described based on refractive index, materials, and propagation mode. Key aspects like attenuation, bandwidth, and dispersion that influence transmission characteristics are covered. Finally, common optical components used in OFC systems like fiber splices, connectors, and couplers are outlined.
Optical Fiber Communication
This document provides an overview of optical fiber communication (OFC). It begins with the historical development and need for optical systems due to limitations of traditional communication methods. The basics of OFC are explained, including the system block diagram and principles of operation using ray theory and total internal reflection. Fiber types and transmission characteristics such as attenuation and bandwidth are covered. Finally, key optical components used in OFC systems such as fiber splices, connectors, and couplers are outlined.
04-TransmissionMedia.ppt
The document discusses various types of transmission media used for data communication, including guided media like twisted pair, coaxial cable, and optical fiber, as well as unguided wireless transmission. It covers characteristics of each medium such as bandwidth, attenuation, interference susceptibility, and data rates. Key concerns in transmission media design are maximizing bandwidth to increase data rates while minimizing transmission impairments over distance.
Ch 1 optical fiber introduction
This document provides an overview of optical fiber communication. It discusses how optical fibers can be used to transmit light signals for communication purposes, providing advantages over existing electrical communication systems. Key points include:
- Optical fiber communication uses light signals transmitted through optical fibers. This provides enormous potential bandwidth compared to existing electrical cables.
- Optical fibers are small, lightweight, and electrically isolated, providing advantages for installation and immunity to electromagnetic interference.
- Early optical fibers had high transmission losses, but losses were reduced below 20 dB/km by 1970, allowing commercial deployment of optical communication systems.
Transmission media
This document discusses different types of transmission media used for data communication. It describes guided media like twisted pair wires, coaxial cables, and optical fibers. It also covers wireless or unguided media such as terrestrial microwave, satellite microwave, broadcast radio, and infrared. For each medium, it provides details on characteristics, advantages, disadvantages, and applications. The key factors that affect the quality of a transmission medium are its bandwidth, interference levels, and transmission impairments. Optical fiber has the highest bandwidth capacity but was initially more expensive over short distances.
TRANSMISSION MEDIA BY DHAVAL MAJITHIA
This document discusses different types of transmission media, including guided and unguided media. It describes four types of guided media: open wire, twisted pair, coaxial cable, and fiber optic cable. Twisted pair cable uses two insulated copper wires twisted together to reduce interference. Coaxial cable has an inner conductor surrounded by insulation and an outer shield. Fiber optic cable uses thin glass fibers to carry light signals. It also discusses four types of unguided or wireless media: radio waves, microwaves, infrared, and visible light. Radio waves can travel long distances while microwaves use line-of-sight transmission between towers. Infrared is used for short-range indoor communication.
Antenna fundamentals
The document discusses the fundamentals of antennas. It begins with a brief history of antennas dating back to Faraday's experiments in the 1830s. It then provides an overview of common antenna types including Yagi-Uda antennas from the 1920s, horn antennas from 1939, antenna arrays from the 1940s, parabolic reflectors, and patch antennas from the 1970s. The document concludes by defining key antenna parameters such as frequency, radiation patterns, field regions, directivity, efficiency, gain, beamwidths, and side lobes that are important for understanding antenna operation and design.
Microwave engineering jwfiles
This document provides an overview of microwaves, including:
1) Microwaves are electromagnetic waves with wavelengths between 1 mm and 1 m, or frequencies between 300 MHz and 300 GHz. They require transmission line theory and distributed circuit elements rather than lumped elements.
2) Common applications of microwaves include radar, wireless communication technologies like WiFi, microwave ovens, and satellite navigation systems.
3) Key concepts in microwave engineering include transmission lines, scattering parameters for circuit analysis, and the different microwave frequency bands designated by letters.
mwe FINAL ppt.pptx
This document provides an introduction to microwave engineering and microwave technology. It discusses key topics such as:
1) Microwaves are a form of electromagnetic radiation with wavelengths between 1 mm to 1 m and frequencies between 300 MHz to 300 GHz. Common applications include radar, wireless communication, and microwave ovens.
2) Microwaves propagate through waveguides such as rectangular, circular, and ridged waveguides. Waveguides allow microwaves to be transmitted with low power loss through reflection off the waveguide walls.
3) Microwave technology has advantages over lower radio frequencies including larger bandwidth, better directivity, smaller antenna size, and lower power consumption. Key applications areas are communication, remote
04 transmission media
This document summarizes various transmission media used for data and computer communications. It discusses both guided media like twisted pair, coaxial cable, and optical fiber as well as unguided or wireless media. Key factors in transmission include bandwidth, data rate, attenuation, interference, and the number of potential receivers. Different media have varying characteristics like maximum bandwidth, typical attenuation rates, and optimal repeater spacing. The document also examines wireless transmission frequencies, antenna types, wireless propagation techniques, and challenges like free space loss, multipath interference, and atmospheric absorption that affect wireless signals.
Implementation of Direct Sequence Spread Spectrum Communication System Using ...
This paper presents the designed and implementation of spread spectrum technology for data transfer to overcome the interference problems associated with narrow band, very high frequency and ultra high frequency data transfer systems. The spread spectrum communication is used to reduce jamming of communication and provides a heightened secure communication. In this paper, the design and analyzes are implemented by Field Programmable Gate Array (FPGA) for baseband spread spectrum communication system using Pseudo Noise Sequences (PNS) for spreading digital data. The sequence generator and direct sequence spread spectrum (DSSS) for a single user is implemented in a FPGA module. The generated pseudo noise sequences are investigated for autocorrelation, cross correlation and balance properties. The bit error rates performance of the system is evaluated in multiuser environment under AWGN and reveals that, the DSSS system using pseudo noise sequences as spreading sequences significantly outperforms for the conventional PN sequences system
Optical fibre
This document summarizes optical fiber communication and fiber optic systems. It discusses how optical fibers transmit light to carry information over long distances with little attenuation. It also describes the basics of how total internal reflection allows light to propagate along the fiber and lists some key applications of fiber optic technology like telephones, internet, and cable TV networks.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
More Related Content
Similar to OPTICALFIBERTRANSMISSION LINK .pdf
9228e5ae8d984678aad8b1d3c8db3b46-compressed-46e3765ce750dd47728ed198f4d5d88c-...
This document discusses different frequency ranges used in electronic communication systems:
- Voice frequencies range from 300-3000 Hz for normal human speech.
- Very low frequencies range from 9 kHz to 30 kHz and are used for some government/military communication and musical instruments.
- Low frequencies from 30-300 kHz are used for aeronautical and marine navigation.
- Medium frequencies from 300 kHz to 3 MHz are used for AM radio broadcasting.
- The document then discusses high, very high, ultrahigh, microwave, and extremely high frequency ranges and their common uses.
Radio communication
This presentation provides an overview of radio communication. It discusses the history of radio from Maxwell's electromagnetic theory to modern innovations. It then covers key topics like classification of radio waves, modulation techniques, transmitter and receiver components, common uses, and future technologies like cognitive radio networks. The presentation aims to explain the basic mechanisms and applications of radio communication over the last hundred years.
BW and spectrum
The document discusses the electromagnetic spectrum, which encompasses all frequencies of electromagnetic signals. It describes how frequency and wavelength relate, with frequency being measured in cycles per second and wavelength being the distance between cycles. The spectrum is divided into segments including radio frequencies, microwaves, infrared, visible light, ultraviolet, and more. Managing bandwidth and developing standards help maximize the efficient use of the limited available spectrum.
Microwave agdon
Microwave transmission refers to using radio waves between 1-30 GHz to transmit information or power. Microwaves are well-suited for point-to-point wireless communication because their short wavelengths allow for directional antennas that do not interfere with nearby equipment using the same frequencies. Microwaves also provide a very large information-carrying capacity. Common uses of microwaves include wireless communication systems, radar, satellite communications, and radio astronomy. Sources of microwaves include vacuum tube devices, solid-state devices, and natural sources like the sun and cosmic microwave background radiation.
Wireless communication by waves
This is one of the presentation of Data Communication.Our teacher asked us on which topic (sector) of data communication will u work ?And we decided to work how waves affect on wireless communication or"Impact of waves on Wireless Communication" communication".
Radio Frequency Waves ,Data communication & Networks
Radio waves are electromagnetic waves that propagate through free space. They have a wavelength between 1mm and 30km and a frequency between 10KHz and 300GHz. Information such as sound and images can be transmitted using radio waves by modifying properties of the wave like its amplitude or frequency. Radio waves can propagate through different modes including ground waves, sky waves, and line-of-sight. Various factors can impair radio wave transmission over long distances including attenuation, noise, multipath propagation, and refraction in the atmosphere. Radio waves are generated by oscillating electric and magnetic fields produced by accelerating charges and can encode both analog and digital information.
01_AME_U1_INTRODUCTION AND MICROWAVE FREQUENCY BANDS.pptx
UNIT I introduces microwave systems and antennas. It discusses microwave frequency bands from 1 GHz to 300 GHz and key antenna concepts like near and far fields, gain, efficiency, impedance matching, and the Friis transmission equation. The unit also covers antenna pattern characteristics, radiated power and fields, and antenna noise temperature.
UNIT I provides an overview of key topics in microwave engineering and antenna fundamentals, including microwave frequency bands, antenna radiation mechanisms, near and far-field regions, antenna parameters like gain and pattern characteristics, impedance matching concepts, and noise modeling of microwave systems.
Microwave rizwan
This document discusses microwave technology and microwave transmission. Some key points:
- Microwaves have wavelengths between 1 mm to 1 m, with frequencies between 300 MHz to 300 GHz. They are used for point-to-point communication through directed beams.
- Microwave transmission does not require wires and is used for communications, including satellite and cellular networks. It has a large bandwidth but is limited by line of sight.
- Microwave radio relay is used to transmit signals between two locations using directional antennas in a line of sight path. It was widely used historically but fiber optic cable is now more common.
Ofc
This document provides an overview of optical fiber communication (OFC). It begins with the historical development and need for optical systems due to limitations of traditional communication methods. The basics of OFC are explained, including the system block diagram and principles of operation using ray theory and total internal reflection. Different types of optical fibers are described based on refractive index, materials, and propagation mode. Key aspects like attenuation, bandwidth, and dispersion that influence transmission characteristics are covered. Finally, common optical components used in OFC systems like fiber splices, connectors, and couplers are outlined.
Optical Fiber Communication
This document provides an overview of optical fiber communication (OFC). It begins with the historical development and need for optical systems due to limitations of traditional communication methods. The basics of OFC are explained, including the system block diagram and principles of operation using ray theory and total internal reflection. Fiber types and transmission characteristics such as attenuation and bandwidth are covered. Finally, key optical components used in OFC systems such as fiber splices, connectors, and couplers are outlined.
04-TransmissionMedia.ppt
The document discusses various types of transmission media used for data communication, including guided media like twisted pair, coaxial cable, and optical fiber, as well as unguided wireless transmission. It covers characteristics of each medium such as bandwidth, attenuation, interference susceptibility, and data rates. Key concerns in transmission media design are maximizing bandwidth to increase data rates while minimizing transmission impairments over distance.
Ch 1 optical fiber introduction
This document provides an overview of optical fiber communication. It discusses how optical fibers can be used to transmit light signals for communication purposes, providing advantages over existing electrical communication systems. Key points include:
- Optical fiber communication uses light signals transmitted through optical fibers. This provides enormous potential bandwidth compared to existing electrical cables.
- Optical fibers are small, lightweight, and electrically isolated, providing advantages for installation and immunity to electromagnetic interference.
- Early optical fibers had high transmission losses, but losses were reduced below 20 dB/km by 1970, allowing commercial deployment of optical communication systems.
Transmission media
This document discusses different types of transmission media used for data communication. It describes guided media like twisted pair wires, coaxial cables, and optical fibers. It also covers wireless or unguided media such as terrestrial microwave, satellite microwave, broadcast radio, and infrared. For each medium, it provides details on characteristics, advantages, disadvantages, and applications. The key factors that affect the quality of a transmission medium are its bandwidth, interference levels, and transmission impairments. Optical fiber has the highest bandwidth capacity but was initially more expensive over short distances.
TRANSMISSION MEDIA BY DHAVAL MAJITHIA
This document discusses different types of transmission media, including guided and unguided media. It describes four types of guided media: open wire, twisted pair, coaxial cable, and fiber optic cable. Twisted pair cable uses two insulated copper wires twisted together to reduce interference. Coaxial cable has an inner conductor surrounded by insulation and an outer shield. Fiber optic cable uses thin glass fibers to carry light signals. It also discusses four types of unguided or wireless media: radio waves, microwaves, infrared, and visible light. Radio waves can travel long distances while microwaves use line-of-sight transmission between towers. Infrared is used for short-range indoor communication.
Antenna fundamentals
The document discusses the fundamentals of antennas. It begins with a brief history of antennas dating back to Faraday's experiments in the 1830s. It then provides an overview of common antenna types including Yagi-Uda antennas from the 1920s, horn antennas from 1939, antenna arrays from the 1940s, parabolic reflectors, and patch antennas from the 1970s. The document concludes by defining key antenna parameters such as frequency, radiation patterns, field regions, directivity, efficiency, gain, beamwidths, and side lobes that are important for understanding antenna operation and design.
Microwave engineering jwfiles
This document provides an overview of microwaves, including:
1) Microwaves are electromagnetic waves with wavelengths between 1 mm and 1 m, or frequencies between 300 MHz and 300 GHz. They require transmission line theory and distributed circuit elements rather than lumped elements.
2) Common applications of microwaves include radar, wireless communication technologies like WiFi, microwave ovens, and satellite navigation systems.
3) Key concepts in microwave engineering include transmission lines, scattering parameters for circuit analysis, and the different microwave frequency bands designated by letters.
mwe FINAL ppt.pptx
This document provides an introduction to microwave engineering and microwave technology. It discusses key topics such as:
1) Microwaves are a form of electromagnetic radiation with wavelengths between 1 mm to 1 m and frequencies between 300 MHz to 300 GHz. Common applications include radar, wireless communication, and microwave ovens.
2) Microwaves propagate through waveguides such as rectangular, circular, and ridged waveguides. Waveguides allow microwaves to be transmitted with low power loss through reflection off the waveguide walls.
3) Microwave technology has advantages over lower radio frequencies including larger bandwidth, better directivity, smaller antenna size, and lower power consumption. Key applications areas are communication, remote
04 transmission media
This document summarizes various transmission media used for data and computer communications. It discusses both guided media like twisted pair, coaxial cable, and optical fiber as well as unguided or wireless media. Key factors in transmission include bandwidth, data rate, attenuation, interference, and the number of potential receivers. Different media have varying characteristics like maximum bandwidth, typical attenuation rates, and optimal repeater spacing. The document also examines wireless transmission frequencies, antenna types, wireless propagation techniques, and challenges like free space loss, multipath interference, and atmospheric absorption that affect wireless signals.
Implementation of Direct Sequence Spread Spectrum Communication System Using ...
This paper presents the designed and implementation of spread spectrum technology for data transfer to overcome the interference problems associated with narrow band, very high frequency and ultra high frequency data transfer systems. The spread spectrum communication is used to reduce jamming of communication and provides a heightened secure communication. In this paper, the design and analyzes are implemented by Field Programmable Gate Array (FPGA) for baseband spread spectrum communication system using Pseudo Noise Sequences (PNS) for spreading digital data. The sequence generator and direct sequence spread spectrum (DSSS) for a single user is implemented in a FPGA module. The generated pseudo noise sequences are investigated for autocorrelation, cross correlation and balance properties. The bit error rates performance of the system is evaluated in multiuser environment under AWGN and reveals that, the DSSS system using pseudo noise sequences as spreading sequences significantly outperforms for the conventional PN sequences system
Optical fibre
This document summarizes optical fiber communication and fiber optic systems. It discusses how optical fibers transmit light to carry information over long distances with little attenuation. It also describes the basics of how total internal reflection allows light to propagate along the fiber and lists some key applications of fiber optic technology like telephones, internet, and cable TV networks.
Similar to OPTICALFIBERTRANSMISSION LINK .pdf (20)
9228e5ae8d984678aad8b1d3c8db3b46-compressed-46e3765ce750dd47728ed198f4d5d88c-...
9228e5ae8d984678aad8b1d3c8db3b46-compressed-46e3765ce750dd47728ed198f4d5d88c-...
Radio Frequency Waves ,Data communication & Networks
Radio Frequency Waves ,Data communication & Networks
01_AME_U1_INTRODUCTION AND MICROWAVE FREQUENCY BANDS.pptx
01_AME_U1_INTRODUCTION AND MICROWAVE FREQUENCY BANDS.pptx
Implementation of Direct Sequence Spread Spectrum Communication System Using ...
Implementation of Direct Sequence Spread Spectrum Communication System Using ...
Recently uploaded
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Recently uploaded (20)
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
OPTICALFIBERTRANSMISSION LINK .pdf
- 1. NAME - KUNAL SAHA DEPARTMENT- AEIE UNIVERSITY ROLL NO - 10505522018 REGISTRATION NUMBER- 221050120104 SEMESTER - 5th CLASS ROLL NO - 09 SUBJECT CODE - PE-EI501 SUBJECT NAME - OPTICAL INSTRUMENTATION TOPIC NAME - OPTICAL FIBER TRANSMISSION LINK BANKURA UNNAYANI INSTITUTE OF ENGINEERING
- 3. Optical transmission Optical instrumentation employs a beam of modulated monochromatic light carry information from transmitter to receiver. The light spectrum spans a tremendous range in the electromagnetic spectrum, extending from the region of 10 terahertz (104 gigahertz) to 1 million terahertz (109 gigahertz). This frequency range essentially covers the spectrum from far infrared (0.3-mm wavelength) through all visible light to near ultraviolet (0.0003-micrometre wavelength). Propagating at such high frequencies, optical wavelengths are naturally suited for high- rate broadband telecommunication. For example, amplitude modulation of an optical carrier at the near-infrared frequency of 300 terahertz by as little as 1 percent yields a transmission bandwidth that exceeds the highest available coaxial cable bandwidth by a factor of 1,000 or more.
- 8. 1. Absorption loss, 2. Scattering loss, 3. Dispersion loss, 4. Radiation loss, 5. Coupling loss. Types of losses in optical fibers:-