Operating system basics, Types of operating systems, Tasks, Process and Threads, Multiprocessing and Multitasking. ES UNIT 4.pptx

Embedded Systems
RTOS for Embedded System Design
Aditya College of Engineering & Technology
Department of Electronics & Communication Engineering
UNIT - 4

Operating System basics Types of operating systems Task, process and threads
Multiprocessing and Multitasking Task scheduling How to choose an RTOS.
UNIT-IV REAL TIME OPERATING SYSTEM:
Operating system basics, Types of operating systems, Tasks,
Process and Threads, Multiprocessing and Multitasking, Task
Scheduling, Threads, Processes and Scheduling, Task
communication, Task synchronization.
HARDWARE SOFTWARE CO-DESIGN:
Fundamental Issues in Hardware Software Co Design,
Computational models in embedded design, Hardware software
Trade-offs, Integration of Hardware and Firmware.

Operating System basics
 Acts as the abstraction layer between system resources and user applications.
 Contains a set of system libraries and services.
Operating System (OS) acts as a bridge between user applications/tasks and the
underlying system resources through a set of system functionalities and services.
The OS manages the system resources and makes them available to the user
applications/tasks on a need basis .
The primary functions of OS are:
1. Make the system convenient to use.
2. Organize and mange the system resources efficiently and correctly.
The Kernel:
 Is the core of OS and is responsible for managing the system resources
communication among the hardware and other system services.
and the

Now let us consider the Architecture of OS:
General Purpose OS contains different services
for handling

General Purpose OS contains different services for
handling
Primary Memory Management:
Refers to volatile memory RAM, where processes are
loaded and variables and shared data associated
with process are stored.
The Memory Management Unit (MMU) of the
kernel is responsible for
•Keeping track of which part of memory area is
currently used by which process.
•Allocating and de-allocating memory space on
need basis. (Dynamic Memory Allocation).

General Purpose OS contains different services for handling
Primary Memory Management:
Refers to volatile memory RAM, where processes are loaded
and variables and shared data associated with process are
stored.
The Memory Management Unit (MMU) of the kernel is
responsible for
•Keeping track of which part of memory area is currently used
by which process.
•Allocating and de-allocating memory space on need basis
(Dynamic Memory Allocation)
Process Management:
•Deals with managing the processes/tasks.
•By setting up the memory space for the process, loading the
process’s code into the memory space, allocating system
resources, scheduling and managing execution of process,
setting up and managing the Process Control Block (PCB),
Inter-process Communication and synchronization, process
termination/deletion etc.

Time Management:
Deals with at what time which process needs to be scheduled.
Till what duration processes needs to be executed.
After what time a process needs to be preempted.

Time Management:
Deals with at what time which process needs to be scheduled.
Till what duration processes needs to be executed.
After what time a process needs to be preempted.
File System Management:
File is collection of information.
A file could be a program, text file, image file, word
documents, audio/video files etc.
Each of these files differ in kind of information they hold
and the way in which information is stored.
The file system management service of kernel is responsible
for:
•Creation, deletion and alteration of files.
•Creation, deletion and alteration of directories.
•Saving of files in secondary storage memory.
•Providing automatic allocation of file space based on amount
of free space available.
•Providing a flexible naming convention for the files.
The various file system management operations are OS
dependent.

How to choose an RTOS.
Multiprocessing and Multitasking Task scheduling
I/O System Management:
Kernel is responsible for routing the I/O request coming from different
user applications to the appropriate I/O devices of the system
In a well structured OS direct access of I/O devices is not allowed and
access to them is provided through a Application Programming
Interfaces (API) exposed by kernel.
Kernel maintains a list of I/O devices of the system. This list may be
available well in advance at the time of building the kernel or in cases
Kernels dynamically updates the list and where the new device is
installed.
The service ‘Device Manager’ is responsible handling all I/O device
related operations.
The kernel talks to I/O devices through a set of low level system calls,
which are implemented in a service called device drivers. These drivers
are specific to a device or a class of devices.
The device manager is responsible for :
•Loading & unloading of device drivers.
• Exchanging information and the system specific controls to and from
the device.

The Operating System Architecture

Secondary Storage Management:
Deals with management of secondary storage devices.
Secondary memory is used as a backup medium for program
and data since the main memory is volatile.
In most of the systems the secondary storage is in the form
of disks (Hard disks).
The secondary storage management services of kernel deals
with : Disk Storage allocation.
Disk Scheduling .
Free disk space management
Protection System:
Most of the modern OS are designed in such a way that
they support multiple users with different levels of access
permissions .
Protection deals with implementing the security polices to
restrict the access to both user and system resources by different
applications or processes or users.
In multiuser OS, one user may not be allowed to view or modify
complete portion of another user’s data or profile details.
Also some applications may not be granted permissions to make
use of certain system resources.
Interrupt Handler:
Kernel provides handler mechanism for all external/internal interrupts generated by the system.
These are some of the services offered by kernel of an OS.
Depending on type of OS, a kernel may contain lesser/more number of services/components.
In addition to above mentioned services many OS offer a no. of add-on services to kernel, Network communication, network
management, user-interface graphics, timer services, error handler, database management etc.

Kernel Space Vs User Space:
The applications/services are classified into : User applications and Kernel applications
The program code corresponding to kernel applications/services are kept in contiguous area of primary memory and
is protected from unauthorized access by user programs/applications—Kernel Space
All user programs are loaded to a specific area of primary memory and this memory area is referred as User space.
The portioning of memory into Kernel space and user space is purely OS dependent.
In OS with virtual memory support, the user applications are loaded into corresponding virtual memory space
with demand paging technique — the entire code for user application need not be loaded into main memory at once;
instead user application is divided into different pages and these pages are loaded into and out of main memory area
on a need basis – Swapping.
Swapping happens between main memory and secondary storage memory.
Each process run in its own virtual memory space and are not allowed accessing the memory space corresponding
to another processes unless explicitly requested by the process.
Most of the OS keep the kernel application code in main memory and it is not swapped out into the secondary
memory.

Monolithic Kernel and Microkernel:
Monolithic Kernel
In monolithic kernel architecture, all kernel services run in
the kernel space.
All kernel modules run in same memory space under a
single kernel thread.
Tight internal integration of kernel modules allows the
effective utilization of the low level features of the
underlying system.
Major drawback is that any error or failure in any one of
the kernel modules leads to the crashing of entire kernel
applications.
LINUX, MS-DOS, SOLARIS are examples of monolithic
kernel OS.
The Monolithic kernel Model

Microkernel
Incorporates only essential set of OS services into the
kernel and rest of OS services are implemented in programs
known as Servers which run in user space.
Provides a highly modular design and OS-neutral
abstraction to the kernel.
Memory management, process management, time system
and interrupt handlers are essential services which forms the
part of microkernel.
Mach, QNX, MINIX3 are examples of microkernel OS.
Offers 2 benefits:
•Robustness: server programs can be reconfigured &
restarted, chances of corruption are ideally zero.
•Configurability: any server application can be changed
without restarting the entire system—dynamically
configurable
The Microkernel Model

Operating System basics Types of operating systems
Depending on kernel and kernel services, purpose and type of computing systems where OS is deployed and
responsiveness to applications, OSs are classified into 2 types:
General Purpose Operating System (GPOS)
Real-Time Operating System (RTOS)
General Purpose Operating System (GPOS)
Deployed in general computing systems.
Kernel is more generalized and it contains all kinds of
services required for executing generic applications.
Often non-deterministic in behavior, there services can
inject random delays into application software and may
cause slow responsiveness of an application at unexpected
times.
They are often deployed in general computing systems
where deterministic behavior is not important.
Personal computers/desktop system is typical example of
a system where GPOS is deployed.
Windows XP/MS-DOS etc. are examples of GPOSs.
Real-Time Operating System (RTOS)
Real-time implies deterministic timing behavior.
Means OS services consumes only known and expected
amounts of time regardless the number of services.
RTOS implements policies and rules concerning time-
critical allocation of system resources.
RTOS decides which application should run in which
order and how much time must be allocated for each
application.
Predictable performance is hallmark of RTOS. This is
achievable by consistent application of policies and rules.
Windows CE, QNX, VxWorks, MicroC/OS-II etc. are
examples of RTOS

Real Time Kernel:
kernel of RTOS
Compare to conventional OS kernel Real
Time kernel is highly specialized and it
contains only minimal set of services required
for running the user applications/tasks.
The basic functions of Real Time Kernel
are:
•Task/Process management.
•Task/Process scheduling.
•Task/Process synchronization.
•Error/Exception Handling.
•Memory management.
•Interrupt Handling.
•Time Management

Real Time Kernel:
kernel of RTOS
are:
•Time Management
Task/Process management:
Deals with setting up the memory space for the tasks, loading the task’s code
into the memory space, allocating system resources, setting up a Task Control
Block (TCB) for the task, termination and deletion.
TCB is used to hold information corresponding to task which includes:
Implementation of TCB is kernel dependent.
Task management service uses TCB of a task in following way:
•Creates a TCB for a task on creating a task.
•Delete/remove TCB of task when task is terminated/deleted
•Reads TCB to get the state of task.
•Update TCB with updated parameters on need basis.
•Modify TCB to change task priority dynamically.
•Task ID •Task state
•Task type •Task Priority
•Task context pointer •Task memory pointers
•Task system resource pointers •Task pointers.

Real Time Kernel:
kernel of RTOS
are:
•Time Management
Task/Process management:
Deals with setting up the memory space for the tasks, loading the task’s code
into the memory space, allocating system resources, setting up a Task Control
Block (TCB) for the task, termination and deletion.
TCB is used to hold information corresponding to task which includes:
Implementation of TCB is kernel dependent.
Task management service uses TCB of a task in following way:
•Creates a TCB for a task on creating a task.
•Delete/remove TCB of task when task is terminated/deleted
•Reads TCB to get the state of task.
•Update TCB with updated parameters on need basis.
•Modify TCB to change task priority dynamically.
Task/Process scheduling:
Deals with sharing CPU among various tasks/processes.
A kernel service called ‘Scheduler’ handles task scheduling.
Scheduler is nothing but an algorithm implementation which performs the
efficient and optimal scheduling of task to provide a deterministic behavior.
•Task ID •Task state
•Task type •Task Priority
•Task context pointer •Task memory pointers
•Task system resource pointers •Task pointers.

Real Time Kernel:
kernel of RTOS
are:
•Time Management
Task/Process synchronization:
Deals with the synchronization of concurrent access of resources, which is shared
across multiple tasks and communication between various tasks.

Real Time Kernel:
kernel of RTOS
are:
•Time Management
Error/Exception Handling:
Deals with registering and handling the errors occurred/exceptions raised during
execution of tasks.
Insufficient memory, timeouts, deadlocks, deadline missing, bus error, divide by
zero, unknown instruction execution etc. are examples of errors/exceptions.
Errors/Exceptions can occur at kernel level services or at task level. Deadlock is an
kernel level error whereas timeout is an example for task level.
The OS kernel gives the information in the form of System Call (API).
Watchdog timer will be used for handling timeouts.

Real Time Kernel:
kernel of RTOS
are:
•Time Management
Error/Exception Handling:
Deals with registering and handling the errors occurred/exceptions raised during
execution of tasks.
Insufficient memory, timeouts, deadlocks, deadline missing, bus error, divide by
zero, unknown instruction execution etc. are examples of errors/exceptions.
Errors/Exceptions can occur at kernel level services or at task level. Deadlock is an
kernel level error whereas timeout is an example for task level.
The OS kernel gives the information in the form of System Call (API).
Watchdog timer will be used for handling timeouts.
Memory Management:
Compare to GPOS, memory management of RTOS is slightly different.
Memory allocation time increases depending upon the block of memory needs to
be allocated and state of allocated memory.
RTOS makes use of ‘block’ based memory allocation technique instead of usual
dynamic memory allocation used by GPOS.
RTOS kernel uses blocks of fixed size of dynamic memory and block is allocated
to a task on need basis. The blocks are stored in ‘free buffer queues’.
To achieve predictable timing and avoid timing overhead, RTOS allows task to
access any memory blocks without any memory protection.
Few RTOS kernels implement Virtual Memory concept of memory allocation if
system supports secondary memory storage.

Real Time Kernel:
kernel of RTOS
are:
•Time Management
Interrupt Handling:
Deals with handling different types of interrupts.
Interrupts provide Real time behavior to system. Interrupts inform the
processor that an external device or an associated task requires
immediate attention of CPU.
Interrupts can be Synchronous or Asynchronous.
Interrupts that occur in sync with currently executing task are known
as Synchronous interrupts — usually software interrupts – divide by 0,
memory segmentation error etc. are few examples.
For Synchronous interrupts the interrupt handler runs in same context
of interrupting task.
Interrupts that occur at any point of execution of any task and are not
in sync with currently executing task are Asynchronous interrupts. –
generated by external devices connected to process/controller – timer
overflow interrupts, serial data reception/transmission interrupts etc. are
examples.
For Asynchronous interrupts the interrupt handler is usually written as
separate task and it runs in different context. Hence a context-switch
occurs while handling an asynchronous interrupt.
Priority levels can be assigned to interrupts and each interrupts can be
enabled and disabled individually.
Most of the RTOS kernel implements ‘Nested interrupts’ architecture,
which allows interruption of a Interrupt Service Routine (ISR), while
servicing an interrupt, by a high priority interrupt.

Real Time Kernel:
kernel of RTOS
are:
•Time Management
Time Management:
Accurate time management is essential for providing precise time
reference to all applications.
The time reference to kernel is provided by a high resolution Real-
Time-Clock (RTC) hardware chip.
The hardware time is programmed to interrupt the processor/controller
at a fixed interval. This is referred as ‘timer tick’. Usually varies in µsec.
If timer tick interval is 1 µsec, system time register will reset in
If timer tick interval is 1 millisecond, system time register will reset in
This timer tick can be utilized for:
•Save the current context.
•Increment the timer register by one.
•Update the timers implemented in kernel.
•Activate the periodic tasks, which are in idle state.
•Invoke the scheduler and schedule the tasks again based on scheduling
algorithm.
•Delete all terminated tasks and associated data structures (TCBs).
•Load the context for first task in the ready queue.

Soft Real Time:
RTOSs that does not guarantee meeting deadlines but offer the best effort to meet the deadlines are referred as
‘Soft Real Time’systems.
Missing deadlines for tasks are acceptable if the frequency of deadline missing is within the compliance limit of
‘Quality of Service (QoS)’ .
Emphasizes on ‘ a late answer is a an acceptable answer, but it could have done bit faster’.
Most often have ‘Human in the loop (HITL)’,Automatic Teller machine (ATM) is a typical example.
A audio-video playback system is another example.
Hard Real Time:
RTOSs that strictly adhere to the timing constraints
for a task are referred as ‘Hard Real Time’systems.
Hard real time system must meet the deadlines for a
task without any slippage. Missing any deadlines may
produce catastrophic results for Hard real time systems
including permanent data lose and irrecoverable
damages to the system/users.
Emphasizes on ‘ a late answer is a wrong answer’ .
Air bag control system and Anti-lock Braking
System (ABS) are typical examples.
The airbag control system must be into action and
deploy the airbags when vehicles meet severe
accident.
Ideally speaking the response time of air bag system
must be zero and bags should be deployed exactly
within the time frame which is predefined.
Any delay in deployment of air-bags makes the life
of passengers under threat.
When the airbag deployment task is triggered, the
currently executing task must be preempted, airbag
deployment task must be brought into execution and
necessary I/O systems should be made readily available
As a Thumb rule hard real time systems doesn’t
implement virtual memory model. This eliminates the
delay in swapping in and out the code.
Most of the Hard Real Time systems are automatic
and does not contain a ‘human in the loop (HITL)’.

In OS context a ‘task’ is defined as the program in execution and the related information maintained by the OS
for the program.
A task is also known as ‘job’in OS context.
A program or part of it in execution is also called a ‘Process’
The terms ‘task’, ‘job’ and ‘process’ refer to the same entity in the OS context and most often they are used
interchangeably.
Process:
Also known as an instance of program in execution.
Multiple instances of the same program can execute simultaneously.
A process requires various system resources like CPU for executing the process, memory for storing the code
corresponding to the process and associated variables, I/O devices for information exchange etc.
A process is sequential in execution.

Structure of a Process
The Structure of a Process:
The concept of process leads to
concurrent execution of tasks thereby the
efficient utilization of CPU and other
system resources.
A process mimics a processor in
properties and holds:
•A stack for holding the local variables
associated with the process
•A set of working registers,
•Process status registers,
•A Program Counter (PC) to point to
next executable instruction of the
process and
•The code corresponding to process.

system resources.
process and

A process which inherits all properties of CPU can be considered as a
virtual processor, awaiting its turn to have its properties switched into
physical processor.
When process gets it turn, its registers and the PC register maps to
physical registers of CPU.
On loading a process into main memory, a specific area of memory
is allocated for the process.
Memory organization of a Process
Memory Organization of a Process:

physical processor.
On loading a process into main memory, a specific area of memory is
allocated for the process.
The memory occupied by process is segregated into 3 regions:
•Code Memory – contains the program code corresponding to process.

physical processor.
•Data Memory – holds all global data for the process.

physical processor.
•Stack Memory—holds all temporary data such as variables local to the
process.

physical processor.
•Stack Memory—holds all temporary data such as variables local to the
process.
Stack memory starts at the highest address from allocated memory
and grows downwards.
Say if allocated memory area for process is 2048-2100, the stack
memory starts at address 2100 and grows downwards. Memory organization of a Process

Process States and State Transition:
The creation of a process to its termination is not a single step
operation.
The process traverses a series of states during its transition from
newly created state to terminated state – ‘Process Life Cycle’.
Process Sates & State transition representation

operation.
‘Created’ state – state at which a process is created, OS recognizes
that a process is created but no resources are allocated.

operation.
‘Ready’ state – state where a process is incepted into the memory
and awaiting Processor time for execution. Processes is placed in
‘Ready list queue’.

operation.
‘Running’ state – state at which a process execution happens.

operation.
‘Blocked/Wait’ state – state where a running process is temporarily
suspended from execution and does not have immediate access to
resources.

operation.
resources.
‘Completed’ state – state where process completes its execution.

operation.
resources.
Transistion of a process from one state to another is called as
‘State Transistion’

Task scheduling How to choose an RTOS.
Multiprocessing and Multitasking
Threads:
A thread is the primitive that can execute
code.
A thread is a single sequential flow of
control within a process.
Thread is also known as light weighted
process.
A process can have many threads of
execution.

Threads:
code.
process.
execution.
Different threads, which are part of a
process, share the same address space (same
code, data and heap memory area).
Memory Organization of a process & its associated threads

Threads:
code.
process.
execution.
Different threads, which are part of a
process, share the same address space (same
code, data and heap memory area).
Threads maintain there own thread status—
CPU register values, PC and stack. Memory Organization of a process & its associated threads

A process/thread in a embedded application may be a
complex or lengthy one and it may contain various sub-
operations like getting input from I/O devices
connected to processor, performing some internal
calculations /operations, updating some I/O devices etc.
If all these sub-operations are executed in sequence,
the CPU utilization may not be efficient.
Instead of this single sequential execution of the
whole process, if task/process is split into different
threads carrying out the different sub-functionalities of
the process, the CPU can be effectively utilized.
Threads corresponding to I/O operations enter wait
state, while other threads which do not require I/O can
be switched to execution.
The concept of Multithreading:

If the process is split into multiple threads, which
executes a portion of the process, there will be a main
thread and rest of them will be created within main
thread.
Use of multiple threads to execute a process results in
following advantages:
Better Memory Utilization: multiple threads of
same process share address space for data memory,
also reduces inter thread communication since variables
will be shared.
Speedy execution: since process splits into different
threads, when one thread enters wait state other thread
can be scheduled.
Efficient CPU Utilization: CPU is engaged all time
Process with multi-threads

The above primitive is used for creating new thread for running the function start_function.
Here pthread_t is the handle to newly created thread and pthread_attr_t is data type for holding thread attributes.
Start_function is the function, the thread is going to execute, arguments is the arguments for start_function
On successful creation of a Pthread, Pthread_create() associates the TCB corresponding to the newly created thread to
variable of type Pthread_t
Thread Standard:
Thread standard deals with different standards available for thread creation and management.
These standards utilize OS for thread creation and management. It is a set of thread class libraries.
The commonly available thread class libraries are POSIX threads, Win32 Threads, Java Threads etc.
POSIX Threads:
Stands for Portable Operating System Interface.
POSIX. 4 standard deals with real time extensions and POSIX.4a standard deals with thread extensions.
The POSIX standard library for thread creation and management is ‘Pthreads’.
The Pthreads library defines the set of POSIX thread creation and management functions in ‘C’ language.
int pthread_create(pthread_t *new_thread_ID, const pthread_attr_t *attribute,
void * (*start function) (void *), void *arguments;

int pthread_join (pthread_t new_thread, void *, *thread_status);
The above primitive blocks the current thread and waits until the completion of the thread pointed by it.
All POSIX thread calls return an integer.
A return value of zero indicates the success of the call. It is always good to check the return value of each call.
Example:
Write a multithread appliction to print “Hello I’m in main thread” from the main thread and “Hello I’m in new
thread” 5 times each, using pthread_create() and pthread_join() POSIX primitives.
#include <pthread.h>
#include <stdlib.h>
#include <stdio.h>
Void *new_thread (void *thread_args)
{
int i,j;
for (j=0;j<5;j++)
{
printf( “Hello I’m in new threadn”);
for (i=0;i<10000;i++)
}
return NULL;
}

if (pthread_join(tcb, NULL))
{
printf(“Error in thread joiningn”);
return -1;
}
return 1;
}
int main (void)
{
int i,j;
pthread_t tcb;
If (pthread_create(&tcb, NULL, new-thread ,NULL))
{
printf(“Error in creating new threadn”);
return -1;
}
for (j=0;j<5;j++)
{
printf( “Hello I’m in main threadn”);
for (i=0;i<10000;i++)
}
Termination of thread can happen in different ways:
•Natural termination—threads completes executions and returns
back to main thread through simple return or by executing
pthread_exit().
•Forced termination—by calling pthread_cancel() or termination
of main thread with exit or exec function.
Exiting with pthread_exit() will not perform a cleanup.
Calling pthread_join() at the end of main thread is best way to
achieve synchronization and cleanup.

Thread
Thread is a single unit of execution and is part of
process.
Process
Process is a program in execution and contains one or
more threads.
Thread does not have its own data memory and
heap memory. It shares the data memory and
heap memory with other threads of same process.
Thread cannot live independently: it lives within
the process.
Process has its own code memory, data memory and stack
memory
Process contains at least one thread
There can be multiple threads in a process. The
first thread calls the main function and occupies
the start of stack memory of the process.
Threads are very inexpensive to create.
Threads within a Process shares data, code and heap
memory. Each thread holds separate memory area for
stack.(Share the total stack memory of process)
Process are very expensive to create as they involve many
OS overhead.
Context switching is inexpensive. and fast Context switching is complex and involves lot of OS
overhead and comparatively slower.
If a Thread expires, its stack is reclaimed by the
process.
If a process dies, the resources allocated to it reclaimed by
OS and all associated threads of the process also dies.

Types of operating systems
Task, process and threads
Multiprocessing and Multitasking sounds alike.
In OS context Multiprocessing describes the ability to execute multiple process simultaneously.
Systems that are capable of performing multiprocessing, are known as multiprocessor systems.
Multiprocessor systems posses multiple processors (CPUs) and can execute multiple processes simultaneously.
The ability of OS multiple programs in memory, which are ready for execution is referred as
Multiprogramming.
In uniprocessor system, it is not possible to execute multiple process simultaneously.
However with uniprocessor system it is possible to achieve some degree of pseudo parallelism in the execution
of multiple processes by switching the execution among different processes.
The ability of the processor to hold multiple processes in memory and switch the processor from executing one
process to another process is known as multitasking.
Multitasking creates the illusion of multiple tasks executing in parallel.
Ina multitasking environment when task/process switching happens, the virtual processor (task/process) gets its
properties converted into that of physical processor. This is controlled by scheduler of OS kernel.
Whenever a CPE switching happens, the current context of execution should be saved to retrieve it at a later
stage when CPU switches to process which was interrupted due to execution switching.
This context saving and later retrieval is essential for resuming exactly from the point where it was interrupted.
Act of switching CPU among the processes or changing current execution context— ‘Context switching’
Act of saving the current context details(Registers, memory, system resource, execution time etc.)— ‘Context
saving’
Process of retrieving the saved context details for a process, which is going to resume its execution— ‘Context
retrieval’

Multitasking involves ‘Context Switching’, ‘Context Saving’and ‘Context Retrieving’.
Process
Time
Aditya College of Engineering & Technology 23

Time
Process
Process 1
running
idle

Time
Process
Process 2
Process 1
running
idle

Most primitive form of multitasking, in which a task/process gets a chance to execute only when currently
executing voluntarily relinquishes the CPU.
Any task/process can hold CPU as much time as it wants.
This name because, this type of implementation involves mercy of tasks each other for getting CPU time for
execution.
If tasks are non-cooperative, the other tasks have to wait for a long time to get the CPU.
Types of Multitasking:
Co-operative Multitasking:
Preemptive Multitasking:
Non-Preemptive Multitasking:
Ensures that every task/process gets a chance to execute.
When and how much time a process gets is dependent on the implementation of preemptive scheduling.
The currently running task/process is preempted to give a chance to other tasks/processes to execute.
Preemption of task may be based on time slots or task/process priority.
The task/process to which CPU is currently allocated is allocated to execute until it terminates or enters
‘Blocked/wait’state, waiting for I/O or system resource.
In cooperative multitasking process/task will not relinquish CPU when it enters s ‘Blocked/wait’state.
Where as in Non-preemptive multitasking currently executing process/task relinquish CPU when it waits for an
I/O or system resource or an event to occur.

Task scheduling
MultM
ip
ur
lo
tic
pe
ro
sc
se
in
ssg
in
a
gna
d
nd
MM
uu
lt
lt
it
ita
as
sk
ki
in
ng
g
There should be some mechanism in place to share the CPU among the different tasks and to decide which
process/task is to be executed at a given point of time.
Determining which task/process is to be executed at given point if time is known as Task Scheduling.
Task scheduling forms the basis for multitasking.
Scheduling polices form the guidelines for determining which task is to be executed when.
The scheduling polices are run in an algorithm by the OS kernel as a service.
The kernel service/application which implements scheduling algorithm, is known as Scheduler.
The process scheduling decision may take place under 4 scenarios, when a process switches its state to:
•Ready’State from ‘Running’State — Scenario 1
•‘Blocked/Wait’State from ‘Running’State — Scenario 2
•‘Ready’State from ‘Blocked/Wait’State — Scenario 3
•‘Completed’State — Scenario 4
Scenario 1: A process switches to ‘Ready’ state from ‘Running’ state when its preempted.— Preemptive Scheduling.
Scheduling in Scenario 2 can be either preemptive or non-preemptive.
Scenario 3: When a high priority process in Blocked/Wait Ready state , the scheduler picks it for execution if
scheduling policy is priority based preemptive.
Scheduling under Scenario 4 can be preemptive, non-preemptive or cooperative scheduling.

Task scheduling
MultM
ip
ur
lo
tic
pe
ro
sc
se
in
ssg
in
a
gna
d
nd
MM
uu
lt
lt
it
ita
as
sk
ki
in
ng
g
The selection of a scheduling criterion/algorithm should consider the following factors:
CPU Utilization: should be high. It is the direct measure of how much percentage of CPU is being utilized.
Throughput: indicates no. of processes executed per unit time. It should always be higher.
Turnaround time: It is the amount of time taken by a process for completing its execution.
It includes time spent by process for waiting for the main memory, time spent in the ready queue, time
spent on completing I/O operations and time spent in execution.
Waiting Time: It is the amount of time spent by process in ‘Ready’ queue waiting to get CPU, should be minimal.
Response Time: time elapsed between submission of process and the first response, should be as least as possible.
Therefore a good scheduling algorithm should have high CPU utilization, minimum Turn Around Time
(TAT), maximum throughput and least response time.
 The OS maintains various queues in connection with CPU scheduling and a process passes through these queues
during the course of admittance to execution completion.
•Job queue: contains all processes in the system.
•Ready queue: contains all processes which are ready for execution and waiting for CPU. Empty when no
process is ready for running.
•Device queue contains a processes, which are waiting for an I/O device

Task scheduling
MultM
ip
ur
lo
tic
pe
ro
sc
se
in
ssg
in
a
gna
d
nd
MM
uu
lt
lt
it
ita
as
sk
ki
in
ng
g
Now let us consider an diagrammatic representation that shows transition of Process through various queues:
Illustration of Process transition through various queues

Task scheduling
MultM
ip
ur
lo
tic
pe
ro
sc
se
in
ssg
in
a
gna
d
nd
MM
uu
lt
lt
it
ita
as
sk
ki
in
ng
g
Non-Preemptive Scheduling:
Non-Preemptive Scheduling is employed in systems, which implement non-preemptive multitasking model.
The currently executing task/process is allowed to run until it terminates or enters the Block/Wait state waiting for
an I/O or system resource.
The various types of non-preemptive scheduling adopted in task/process scheduling are:
First Come First Served (FCFS)/FIFO Scheduling
Last Come First Served (LCFS)/LIFO Scheduling
Shortest Job First (SJF) Scheduling
Priority Based Scheduling
First Come First Served (FCFS)/FIFO Scheduling:
Allocates CPU time to the process based on order in which they enter the ‘Ready’ queue.
Example is Ticket reservation system where people need to stand in a queue and the first person in the queue is
serviced first.
The first entered process is serviced first, also called as First In First Out (FIFO) scheduling.

Task scheduling
MultM
ip
ur
lo
tic
pe
ro
sc
se
in
ssg
in
a
gna
d
nd
MM
uu
lt
lt
it
ita
as
sk
ki
in
ng
g
Example 1:
Three processes with process IDs P1,P2 and P3 with estimated completion time 10,5,7 milliseconds respectively enters the ready queue
together in the order P1,P2,P3. Calculate the waiting time and Turn Around Time(TAT) for each process and the average waiting time
and average Turn Around Time(Assuming there is no I/O waiting for the Processes.)
The sequence of execution of the processes by CPU is represented as
P1 P2 P3
0 10 15 22
10 5 7
Assuming the CPU is readily available at the time of arrival of
P1, P1 starts execution without any waiting in ‘Ready’ queue.
Hence the waiting time of Process, P1 will be zero. Therefore,
waiting time of Process, P1 = 0ms (P1 starts execution first)
waiting time of Process, P2 = 10ms (P2 starts execution after completion of P1 )
waiting time of Process, P3 = 15ms (P3 starts execution after completion of P1 and P2)
Therefore, Average waiting time = (waiting time of (P1+P2+P3) / 3)
(0 + 10 +15) / 3 = 25/3 = 8.33 milliseconds
Turn Around Time of Process, P1 = 10ms (time spent in Ready Queue + Execution Time)
Therefore, Average Turn Around Time = (Turn Around Time of (P1+P2+P3) / 3)
(10 + 15 +22) / 3 = 47/3 = 15.66 milliseconds
Average Execution Time = (Execution Time of (P1+P2+P3) / 3)
(10 + 5 +7) / 3 = 22/3 = 7.33 milliseconds
Average Turn Around Time = Average waiting time + Average Execution Time
8.33 + 7.33 = 15.66 milliseconds

Task scheduling
MultM
ip
ur
lo
tic
pe
ro
sc
se
in
ssg
in
a
gna
d
nd
MM
uu
lt
lt
it
ita
as
sk
ki
in
ng
g
Example 2:
Three processes with process IDs P1,P2 and P3 with estimated completion time 10,5,7 milliseconds respectively enters the ready queue
together in the order P2,P1,P3. Calculate the waiting time and Turn Around Time(TAT) for each process and the average waiting time
and average Turn Around Time(Assuming there is no I/O waiting for the Processes.)
The sequence of execution of the processes by CPU is represented as
P2 P1 P3
0 5 15 22
5 10 7
Assuming the CPU is readily available at the time of arrival of
P2, P2 starts execution without any waiting in ‘Ready’ queue.
Hence the waiting time of Process, P2 will be zero. Therefore,
waiting time of Process, P1 = 5ms (P1 starts execution after completion of P2 )
Therefore, Average waiting time = (waiting time of (P2+P1+P3) / 3)
(0 + 5 +15) / 3 = 20/3 = 6.66 milliseconds
Therefore, Average Turn Around Time = (Turn Around Time of (P2+P1+P3) / 3)
(5 + 15 +22) / 3 = 42/3 = 14 milliseconds
Average Execution Time = (Execution Time of (P2+P1+P3) / 3)
(5 + 10 +7) / 3 = 22/3 = 7.33 milliseconds
Average Turn Around Time = Average waiting time + Average Execution Time
6.66 + 7.33 = 14 milliseconds

Task scheduling
MultM
ip
ur
lo
tic
pe
ro
sc
se
in
ssg
in
a
gna
d
nd
MM
uu
lt
lt
it
ita
as
sk
ki
in
ng
g
Analysis:
The Average Waiting Time and Average Turn Around Time depends upon order in which the processes enter
the ‘Ready’ queue.
The Average Waiting Time and Average Turn Around Time improves if the process with shortest execution
time is scheduled first.
Major Drawbacks are:
It favors monopoly of process. A process, which does not contain any I/O operation continues it execution till it
finishes. If the task/process contains I/O operation, the CPU is relinquished by the process.
In general FCFS algorithm favors CPU bound processes and I/O bound processes must wait until completion of
CPU bound processes, if currently executing process is a CPU bound Process.
This leads to poor device utilization.Average waiting Time is not minimal for FCFS scheduling algorithm.
Last Come First Served (LCFS)/LIFO Scheduling:
Also allocates CPU time to the process based on order in which they enter the ‘Ready’ queue.
The Last entered process is serviced first, also called as Last In First Out (LIFO) scheduling where the the process,
which is put last into ‘Ready’ queue is serviced first.

Task scheduling
MultM
ip
ur
lo
tic
pe
ro
sc
se
in
ssg
in
a
gna
d
nd
MM
uu
lt
lt
it
ita
as
sk
ki
in
ng
g
Example 1:Three processes with process IDs P1,P2 and P3 with estimated completion time 10,5,7 milliseconds respectively enters the
ready queue together in the order P1,P2,P3 (Assume only P1 is present in ‘Ready’ queue when the scheduler picks it up and P2, P3
entered ‘Ready’ queue after that ). Now a new process, P4 with estimated completion time 6 ms enters the ‘Ready’ queue after 5ms of
scheduling P1. Calculate the waiting time and Turn Around Time(TAT) for each process and the average waiting time and average
TurnAround Time(Assuming there is no I/O bound Processes.)
Initially there is only P1 available in the ready queue and the
scheduling sequence will be P1, P3, P2.
P4 enters the queue during execution of P1and becomes the last
process to enter the ‘Ready’ queue. Now the order of execution
changes to P1, P4, P3, P2 and can be represented as:
0
10 7
waiting time of Process, P4 = 5ms (P4 starts execution after completion of P1 but P4
arrived after 5ms of execution of P1, (10-5=5))
waiting time of Process, P2 = 23ms (P2 starts execution after completion of P1, P4 & P3)
Therefore, Average waiting time = (waiting time of (P1+P4+P3+P2) / 4)
(0 + 5 +16 + 23) / 4 =44/4 = 11 milliseconds
TurnAround Time of Process, P2 = 28ms (time spent in Ready Queue + Execution Time)
Therefore, Average TurnAround Time = (Turn Around Time of (P1+P4+P3 + P2) / 4)
(10 + 11+23+28) / 4 = 72/4 = 18 milliseconds
P1 P4 P3 P2
10 16 23 28
6 5

Operating system basics, Types of operating systems, Tasks, Process and Threads, Multiprocessing and Multitasking. ES UNIT 4.pptx

Operating system basics, Types of operating systems, Tasks, Process and Threads, Multiprocessing and Multitasking. ES UNIT 4.pptx

Recommended

Recommended

More Related Content

Similar to Operating system basics, Types of operating systems, Tasks, Process and Threads, Multiprocessing and Multitasking. ES UNIT 4.pptx

Similar to Operating system basics, Types of operating systems, Tasks, Process and Threads, Multiprocessing and Multitasking. ES UNIT 4.pptx (20)

More from SattiBabu16

More from SattiBabu16 (13)

Recently uploaded

Recently uploaded (20)

Operating system basics, Types of operating systems, Tasks, Process and Threads, Multiprocessing and Multitasking. ES UNIT 4.pptx