Oblique End-Setting Out_PPT.pdf
•
0 likes•790 views
An oblique end roof is a sloped roof that has ends that are sloped at an angle other than 90 degrees to the slope of the roof. The ends of the roof are cut on an angle rather than being squared off. This creates triangular sections at the ends of the roof rather than rectangular sections, changing the appearance and structure of the roof.
Report
Share
Report
Share
Download to read offline
Recommended
Place and Fix Reinforcement Materials Intro (2023 Edit).pptx
Steel reinforcement is used to strengthen concrete. Deformed steel bars or welded wire mesh are installed in formwork before pouring concrete. This creates a composite material with increased tensile and shear strength. Reinforcement prevents cracking and failure of concrete under loads. Common reinforcement materials include deformed bars, fabric mesh, and trench mesh configured for specific uses. Proper installation of reinforcement and vapor barriers is important for concrete strength and preventing moisture issues.
Demolition - 7 Process' of demolition Scenarios.pptx
This document lists various structures and items that may require demolition including a free standing carport, pergola or patio, a brick wall with color-bond fence, a small concrete pool, a timber clad wood shed, internal walls and joinery in a house, and external sections of a house once the internal structure has been demolished.
Practical Assessment_ Repair wall and floor tiling.docx
This document outlines the instructions and assessment criteria for a student to complete a practical assessment repairing and replacing wall and floor tiles. The student must remove and replace a minimum of three damaged wall tiles on different substrates and eight damaged floor tiles. They must follow safety procedures, correctly install tiles with adhesive and waterproofing, clean up their work area, and submit documentation and photos of their completed work. The student will have two attempts to successfully demonstrate their tiling skills based on a checklist of criteria.
Hansens Lodge Take-off.pdf
This document contains revisions to the Hanson's Lodge project plans. The revisions include updated window schedules, brick hatching, prices, and additional details on roofing and cost centers. The document provides site plans, elevations, sections, and schedules for the proposed residence, carport, and verandah. Details are given for framing, footings, windows, doors, and other building elements.
Small House Plans & Calculations.pdf
This document contains revisions to a residential construction project including calculation sheets to determine material requirements. It includes a plan view, elevations, schedules and 5 calculation sheets to determine quantities of materials needed for internal linings, external cladding, roofing, concrete slab, timber wall frame, timber roof and flooring. The latest revision on 18/10/2022 updated missing measurements on the plan view.
Deck and Screen plans & Calculations
The document provides plans, specifications, drawings and calculations for the construction of a deck and screen wall. It includes a title page, 5 pages of drawings showing plans, elevations and section views of the deck and screen wall, a materials schedule and costing table, calculation sheets, work schedules and pricing information for materials.
CIT Subject Guide EPT
CPCCCA3027 - Set up, operate and maintain indirect action powder-actuated power tools -CIT Subject Guide EPT
Recommended
Place and Fix Reinforcement Materials Intro (2023 Edit).pptx
Steel reinforcement is used to strengthen concrete. Deformed steel bars or welded wire mesh are installed in formwork before pouring concrete. This creates a composite material with increased tensile and shear strength. Reinforcement prevents cracking and failure of concrete under loads. Common reinforcement materials include deformed bars, fabric mesh, and trench mesh configured for specific uses. Proper installation of reinforcement and vapor barriers is important for concrete strength and preventing moisture issues.
Demolition - 7 Process' of demolition Scenarios.pptx
This document lists various structures and items that may require demolition including a free standing carport, pergola or patio, a brick wall with color-bond fence, a small concrete pool, a timber clad wood shed, internal walls and joinery in a house, and external sections of a house once the internal structure has been demolished.
Practical Assessment_ Repair wall and floor tiling.docx
This document outlines the instructions and assessment criteria for a student to complete a practical assessment repairing and replacing wall and floor tiles. The student must remove and replace a minimum of three damaged wall tiles on different substrates and eight damaged floor tiles. They must follow safety procedures, correctly install tiles with adhesive and waterproofing, clean up their work area, and submit documentation and photos of their completed work. The student will have two attempts to successfully demonstrate their tiling skills based on a checklist of criteria.
Hansens Lodge Take-off.pdf
This document contains revisions to the Hanson's Lodge project plans. The revisions include updated window schedules, brick hatching, prices, and additional details on roofing and cost centers. The document provides site plans, elevations, sections, and schedules for the proposed residence, carport, and verandah. Details are given for framing, footings, windows, doors, and other building elements.
Small House Plans & Calculations.pdf
This document contains revisions to a residential construction project including calculation sheets to determine material requirements. It includes a plan view, elevations, schedules and 5 calculation sheets to determine quantities of materials needed for internal linings, external cladding, roofing, concrete slab, timber wall frame, timber roof and flooring. The latest revision on 18/10/2022 updated missing measurements on the plan view.
Deck and Screen plans & Calculations
The document provides plans, specifications, drawings and calculations for the construction of a deck and screen wall. It includes a title page, 5 pages of drawings showing plans, elevations and section views of the deck and screen wall, a materials schedule and costing table, calculation sheets, work schedules and pricing information for materials.
CIT Subject Guide EPT
CPCCCA3027 - Set up, operate and maintain indirect action powder-actuated power tools -CIT Subject Guide EPT
Hansens Lodge for Plan and Organise
This document contains revisions to the Hanson's Lodge project plans. The revisions include updated window schedules, brick hatching, prices, and additional details on roofing and cost centers. A new roof plan was also added. The document provides site plans, elevations, sections, and schedules for windows, doors, framing and other project details. Revisions have been made on five different dates between May 2022 and October 2022.
Work Effectively and Sustainably_Student Practical Assessment.docx
This document provides instructions and assessment materials for a construction industry practical assessment involving working effectively as a team. Students are to complete the assessment as part of a team task and related documentation, including materials lists, toolbox talks, and a report evaluating the team's planning, roles, skills, and environmental considerations. The assessment consists of collaborative teamwork during a practical construction task, followed by individual documentation and reflection uploaded to an online portal.
Hansens Lodge version 1.2 updated Layout for Ready skills updated on 171022.pdf
Hansens Lodge version 1.2 updated Layout for Ready skills updated on 171022.pdfCanberra Institute of technology
This document contains revisions to the Hanson's Lodge project plans. The revisions include updated window schedules, brick hatching, prices, and additional details on roofing and cost centers. A new roof plan was also added. The document provides site plans, elevations, sections and details of the proposed residence and includes schedules for windows, doors, timber framing and other project specifications.Axon Cladding Installation Guide
This document provides installation guidelines for James Hardie Axon cladding. It includes information on:
- Sheet sizes and accessories for Axon cladding
- Framing requirements including minimum stud sizes and spacing based on wind load classifications
- Safe working practices for cutting including using dust-reducing saws and appropriate respirators
- Moisture management requirements including installing a weather barrier under the cladding
- Design considerations such as ground clearances, termite protection, and fire ratings that can be achieved.
Woodhouse installation guide for cladding boards
This document provides installation guidelines for Woodhouse Timber Company's Weatherproof cladding boards. It discusses the sizes and profiles available, requirements under the National Construction Code regarding structural performance and weatherproofing, fire safety considerations for different building classes, bushfire rating requirements, and guidelines for proper storage, handling, acclimation and installation to allow for moisture movement of the timber cladding over time. Attention to flashing, sealing cuts and ends, and designing for drainage is advised to protect the cladding from expansion and shrinkage due to changes in moisture content.
Optical Dumpy Enlarge staff reading.docx
This short document contains 5 sections labeled A through E. It appears to be an outline or listing of topics but provides no other context or details about the content of each section.
Cladding introduction class presentation
Cladding is made up of four layers that protect the exterior of a structure: a thermal and vapour barrier, a cavity for airflow, cladding material like boards or panels, and flashings. The barrier stops moisture from entering while the cavity allows drying; cladding protects these layers from weather. Flashings weatherproof intersections to direct water away from the structure. Together, these layers keep buildings dry, comfortable and protected from the elements.
Practical assessment 2 - Install horizontal weatherboards to internal corner
Practical assessment 2 - Install horizontal weatherboards to internal cornerCanberra Institute of technology
Practical assessment 2 - Install horizontal weatherboards to internal corner.
CPCCCA3017 - Install exterior claddingPractical Assessment 1 - Install horizontal weatherboards
This document provides instructions for assessing a student's practical installation of exterior cladding. It outlines the tasks the student must complete, including installing weatherboards around corners, windows and doors. The student will have up to four hours to complete the assessment and at least two attempts if not satisfactory on the first try. The document provides detailed instructions on correctly installing the cladding materials according to manufacturer's specifications and safety standards.
Practical assessment 3 - Install horizontal and vertical sheet panels
Practical assessment 3 - Install horizontal and vertical sheet panels Canberra Institute of technology
Practical assessment 3 - Install horizontal and vertical sheet panels.
CPCCCA3017 - Install exterior claddingMakita cold cut manual
The document is an instruction manual for a cordless metal cutter. It provides specifications for the tool such as its blade diameter, maximum cutting depth, voltage, weight, and applicable battery cartridges and chargers. It also contains safety warnings and instructions for proper use, including maintaining control of the tool, keeping hands away from the cutting area, risks of kickback, and ensuring the guard is working properly. Symbols used on the tool are defined. Noise and vibration levels are specified according to industry standards.
Small House Calculations
This document contains calculations and material schedules for a proposed residence project. It includes plans, elevations, and sections of the design. Calculation sheets determine quantities of materials needed for internal linings, cladding, roofing, concrete slab, timber framing, flooring, and more. Annexes specify material choices for various components. The document was initially released on June 15, 2022 as Version 1.0 and was updated on August 31, 2022 to Version 1.1 with additional details.
3. Practical Assessment Skillion roof.docx
This document provides instructions and assessment criteria for students to construct a skillion roof with a scotch valley. It outlines the key tasks such as completing a job safety analysis, selecting tools and materials, performing calculations, erecting the roof frame, installing the scotch valley, taking photos, dismantling and cleaning up. Students must demonstrate their skills in safely and correctly completing these tasks to pass the assessment. They have two attempts to successfully meet all the criteria.
Practical assessment Pitched Roof.docx
The document is an assessment for students to construct a pitched roof. It includes instructions for students to complete a job safety analysis, toolbox talk, material and tool selection, roof calculations, construction of the roof, and clean-up. Students are assessed on their skills and given up to two attempts to satisfactorily complete the task.
Form Release Agent SDS
This safety data sheet provides information on Fosroc Form Release Agent. It is classified as a hazardous and dangerous good. It lists the product ingredients and properties. It cautions that the product may be fatal if swallowed, cause skin and eye irritation, and drowsiness. It provides handling, storage, exposure control and personal protection recommendations. It also covers first aid measures, fire fighting, accidental release, toxicological information, and disposal considerations.
Practical Assessment 3 - Reinforcement
The document provides instructions for a student to complete a practical assessment on placing and fixing reinforcement material. It includes specifications for constructing pad footings and a slab, cutting and placing rebar, mesh, and fittings according to the plans. It outlines tasks, materials, time allowed, assessment conditions, and a checklist for the assessor to provide feedback on the student's demonstration of skills.
Practical Assessment 2- Reinforcement
1) The document provides instructions and specifications for a practical assessment on placing and fixing reinforcement material. It includes details on the tasks to be completed, materials to use, photos required, time allowed, and assessment conditions.
2) Students must correctly set up formwork, select and install reinforcement materials like mesh and rebar according to the given plan and specifications. This includes making footing cages, installing trench mesh, and correctly placing layers of slab mesh.
3) Students will be assessed on their ability to complete the tasks safely and according to instructions, with up to two attempts allowed to achieve a satisfactory result. Photos and a checklist are used to document completion of the key steps.
Practical Assessment 1 - Reinforcement
The document provides instructions and specifications for a practical assessment requiring a student to correctly place and fix reinforcement material into simulated formwork. The student must read plans, measure, cut, and bend reinforcement materials to construct footing cages. They must then install the cages in the formwork with proper laps, splices, and cover according to specifications and code requirements. Finally, the student must clean up their work area and store equipment properly. The assessor will observe and provide feedback on the student's work.
Trench Mesh Quantities Calculations
This document provides instructions and specifications for a student activity calculating reinforcement requirements for a concrete footing. It includes a legend, plan, and section drawings of the footing along with specifications on the trench mesh, concrete dimensions, and cover requirements. Students are asked to calculate the perimeter of the footing, lengths of trench mesh needed including laps and splices, required spacer height accounting for cover, and number of trench mesh supports. The goal is to practice calculations relevant to determining reinforcement quantities as required for carpentry work.
More Related Content
More from Canberra Institute of technology
Hansens Lodge for Plan and Organise
This document contains revisions to the Hanson's Lodge project plans. The revisions include updated window schedules, brick hatching, prices, and additional details on roofing and cost centers. A new roof plan was also added. The document provides site plans, elevations, sections, and schedules for windows, doors, framing and other project details. Revisions have been made on five different dates between May 2022 and October 2022.
Work Effectively and Sustainably_Student Practical Assessment.docx
This document provides instructions and assessment materials for a construction industry practical assessment involving working effectively as a team. Students are to complete the assessment as part of a team task and related documentation, including materials lists, toolbox talks, and a report evaluating the team's planning, roles, skills, and environmental considerations. The assessment consists of collaborative teamwork during a practical construction task, followed by individual documentation and reflection uploaded to an online portal.
Hansens Lodge version 1.2 updated Layout for Ready skills updated on 171022.pdf
Hansens Lodge version 1.2 updated Layout for Ready skills updated on 171022.pdfCanberra Institute of technology
This document contains revisions to the Hanson's Lodge project plans. The revisions include updated window schedules, brick hatching, prices, and additional details on roofing and cost centers. A new roof plan was also added. The document provides site plans, elevations, sections and details of the proposed residence and includes schedules for windows, doors, timber framing and other project specifications.Axon Cladding Installation Guide
This document provides installation guidelines for James Hardie Axon cladding. It includes information on:
- Sheet sizes and accessories for Axon cladding
- Framing requirements including minimum stud sizes and spacing based on wind load classifications
- Safe working practices for cutting including using dust-reducing saws and appropriate respirators
- Moisture management requirements including installing a weather barrier under the cladding
- Design considerations such as ground clearances, termite protection, and fire ratings that can be achieved.
Woodhouse installation guide for cladding boards
This document provides installation guidelines for Woodhouse Timber Company's Weatherproof cladding boards. It discusses the sizes and profiles available, requirements under the National Construction Code regarding structural performance and weatherproofing, fire safety considerations for different building classes, bushfire rating requirements, and guidelines for proper storage, handling, acclimation and installation to allow for moisture movement of the timber cladding over time. Attention to flashing, sealing cuts and ends, and designing for drainage is advised to protect the cladding from expansion and shrinkage due to changes in moisture content.
Optical Dumpy Enlarge staff reading.docx
This short document contains 5 sections labeled A through E. It appears to be an outline or listing of topics but provides no other context or details about the content of each section.
Cladding introduction class presentation
Cladding is made up of four layers that protect the exterior of a structure: a thermal and vapour barrier, a cavity for airflow, cladding material like boards or panels, and flashings. The barrier stops moisture from entering while the cavity allows drying; cladding protects these layers from weather. Flashings weatherproof intersections to direct water away from the structure. Together, these layers keep buildings dry, comfortable and protected from the elements.
Practical assessment 2 - Install horizontal weatherboards to internal corner
Practical assessment 2 - Install horizontal weatherboards to internal cornerCanberra Institute of technology
Practical assessment 2 - Install horizontal weatherboards to internal corner.
CPCCCA3017 - Install exterior claddingPractical Assessment 1 - Install horizontal weatherboards
This document provides instructions for assessing a student's practical installation of exterior cladding. It outlines the tasks the student must complete, including installing weatherboards around corners, windows and doors. The student will have up to four hours to complete the assessment and at least two attempts if not satisfactory on the first try. The document provides detailed instructions on correctly installing the cladding materials according to manufacturer's specifications and safety standards.
Practical assessment 3 - Install horizontal and vertical sheet panels
Practical assessment 3 - Install horizontal and vertical sheet panels Canberra Institute of technology
Practical assessment 3 - Install horizontal and vertical sheet panels.
CPCCCA3017 - Install exterior claddingMakita cold cut manual
The document is an instruction manual for a cordless metal cutter. It provides specifications for the tool such as its blade diameter, maximum cutting depth, voltage, weight, and applicable battery cartridges and chargers. It also contains safety warnings and instructions for proper use, including maintaining control of the tool, keeping hands away from the cutting area, risks of kickback, and ensuring the guard is working properly. Symbols used on the tool are defined. Noise and vibration levels are specified according to industry standards.
Small House Calculations
This document contains calculations and material schedules for a proposed residence project. It includes plans, elevations, and sections of the design. Calculation sheets determine quantities of materials needed for internal linings, cladding, roofing, concrete slab, timber framing, flooring, and more. Annexes specify material choices for various components. The document was initially released on June 15, 2022 as Version 1.0 and was updated on August 31, 2022 to Version 1.1 with additional details.
3. Practical Assessment Skillion roof.docx
This document provides instructions and assessment criteria for students to construct a skillion roof with a scotch valley. It outlines the key tasks such as completing a job safety analysis, selecting tools and materials, performing calculations, erecting the roof frame, installing the scotch valley, taking photos, dismantling and cleaning up. Students must demonstrate their skills in safely and correctly completing these tasks to pass the assessment. They have two attempts to successfully meet all the criteria.
Practical assessment Pitched Roof.docx
The document is an assessment for students to construct a pitched roof. It includes instructions for students to complete a job safety analysis, toolbox talk, material and tool selection, roof calculations, construction of the roof, and clean-up. Students are assessed on their skills and given up to two attempts to satisfactorily complete the task.
Form Release Agent SDS
This safety data sheet provides information on Fosroc Form Release Agent. It is classified as a hazardous and dangerous good. It lists the product ingredients and properties. It cautions that the product may be fatal if swallowed, cause skin and eye irritation, and drowsiness. It provides handling, storage, exposure control and personal protection recommendations. It also covers first aid measures, fire fighting, accidental release, toxicological information, and disposal considerations.
Practical Assessment 3 - Reinforcement
The document provides instructions for a student to complete a practical assessment on placing and fixing reinforcement material. It includes specifications for constructing pad footings and a slab, cutting and placing rebar, mesh, and fittings according to the plans. It outlines tasks, materials, time allowed, assessment conditions, and a checklist for the assessor to provide feedback on the student's demonstration of skills.
Practical Assessment 2- Reinforcement
1) The document provides instructions and specifications for a practical assessment on placing and fixing reinforcement material. It includes details on the tasks to be completed, materials to use, photos required, time allowed, and assessment conditions.
2) Students must correctly set up formwork, select and install reinforcement materials like mesh and rebar according to the given plan and specifications. This includes making footing cages, installing trench mesh, and correctly placing layers of slab mesh.
3) Students will be assessed on their ability to complete the tasks safely and according to instructions, with up to two attempts allowed to achieve a satisfactory result. Photos and a checklist are used to document completion of the key steps.
Practical Assessment 1 - Reinforcement
The document provides instructions and specifications for a practical assessment requiring a student to correctly place and fix reinforcement material into simulated formwork. The student must read plans, measure, cut, and bend reinforcement materials to construct footing cages. They must then install the cages in the formwork with proper laps, splices, and cover according to specifications and code requirements. Finally, the student must clean up their work area and store equipment properly. The assessor will observe and provide feedback on the student's work.
Trench Mesh Quantities Calculations
This document provides instructions and specifications for a student activity calculating reinforcement requirements for a concrete footing. It includes a legend, plan, and section drawings of the footing along with specifications on the trench mesh, concrete dimensions, and cover requirements. Students are asked to calculate the perimeter of the footing, lengths of trench mesh needed including laps and splices, required spacer height accounting for cover, and number of trench mesh supports. The goal is to practice calculations relevant to determining reinforcement quantities as required for carpentry work.
More from Canberra Institute of technology (20)
Work Effectively and Sustainably_Student Practical Assessment.docx
Work Effectively and Sustainably_Student Practical Assessment.docx
Hansens Lodge version 1.2 updated Layout for Ready skills updated on 171022.pdf
Hansens Lodge version 1.2 updated Layout for Ready skills updated on 171022.pdf
Practical assessment 2 - Install horizontal weatherboards to internal corner
Practical assessment 2 - Install horizontal weatherboards to internal corner
Practical Assessment 1 - Install horizontal weatherboards
Practical Assessment 1 - Install horizontal weatherboards
Practical assessment 3 - Install horizontal and vertical sheet panels
Practical assessment 3 - Install horizontal and vertical sheet panels
Recently uploaded
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Recently uploaded (20)
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Oblique End-Setting Out_PPT.pdf
- 1. Setting out an OBLIQUE END ROOF