Apresentação de fotografias do Instituto Nacional de Engenharia de Superfícies elaborada para evento de avaliação do Programa INCTs, realizado em Brasília nos dias 23 e 24 de novembro de 2010.
Stability of expanded austenite, generated by ion carburizing and ion nitridi...Javier García Molleja
Authors: J. García Molleja, M. Milanese, M. Piccoli, R. Moroso, J. Niedbalski, L. Nosei, J. Bürgi, E. Bemporad, J. Feugeas
Surface and Coatings Technology 218 (2013) 142-151 (March 15th 2013)
Only the first page is uploaded because Elsevier's copyrigth policy. Available at: http://dx.doi.org/10.1016/j.surfcoat.2012.12.043
Characterization of expanded austenite in stainless steels by ion carburizati...Javier García Molleja
Thesis dissertation in order to obtain the degree in Doctor in Physics. Austenitici stainless steel modification by ion carburization and study of its stability under plasma focus irradiation. Developed at Universidad Nacional de Rosario (Argentina) in March 2012
Apresentação do Dr. Felipe de Campos Carreri (ISIEngenharia de Superfícies) no 1° Workshop de Tecnologias a Plasma para o Setor Automotivo, realizado em Belo Horizonte (MG) em 3 de agosto de 2017, pelo ISI de Engenharia de Superfícies (participante do Instituto Nacional de Engenharia de Superfícies).
Apresentação de Prof. José Rubens Gonçalves Carneiro (PUC Minas) no 1° Workshop de Tecnologias a Plasma para o Setor Automotivo, realizado em Belo Horizonte (MG) em 3 de agosto de 2017, pelo Instituto SENAI de Inovação em Engenharia de Superfícies (participante do Instituto Nacional de Engenharia de Superfícies).
Stability of expanded austenite, generated by ion carburizing and ion nitridi...Javier García Molleja
Authors: J. García Molleja, M. Milanese, M. Piccoli, R. Moroso, J. Niedbalski, L. Nosei, J. Bürgi, E. Bemporad, J. Feugeas
Surface and Coatings Technology 218 (2013) 142-151 (March 15th 2013)
Only the first page is uploaded because Elsevier's copyrigth policy. Available at: http://dx.doi.org/10.1016/j.surfcoat.2012.12.043
Characterization of expanded austenite in stainless steels by ion carburizati...Javier García Molleja
Thesis dissertation in order to obtain the degree in Doctor in Physics. Austenitici stainless steel modification by ion carburization and study of its stability under plasma focus irradiation. Developed at Universidad Nacional de Rosario (Argentina) in March 2012
Apresentação do Dr. Felipe de Campos Carreri (ISIEngenharia de Superfícies) no 1° Workshop de Tecnologias a Plasma para o Setor Automotivo, realizado em Belo Horizonte (MG) em 3 de agosto de 2017, pelo ISI de Engenharia de Superfícies (participante do Instituto Nacional de Engenharia de Superfícies).
Apresentação de Prof. José Rubens Gonçalves Carneiro (PUC Minas) no 1° Workshop de Tecnologias a Plasma para o Setor Automotivo, realizado em Belo Horizonte (MG) em 3 de agosto de 2017, pelo Instituto SENAI de Inovação em Engenharia de Superfícies (participante do Instituto Nacional de Engenharia de Superfícies).
Seminário proferido na Universidade de Caxias do Sul em junho de 2017 para estudantes de graduação e pós-graduação pelo prof. Carlos A. Figueroa, pesquisador da seção UCS do Instituto.
Palestra proferida na seção UCS do Instituto em 04/04/17 por Felipe de Campos Carreri, pesquisador no Instituto SENAI de Inovação em Engenharia de Superfícies, Belo Horizonte. Diversos produtos e materiais com quem todos temos contato no dia-a-dia se devem à inovações na área de Engenharia de Superfícies. A necessidade de inovar se torna cada vez mais clara às indústrias que desejam se manter competitivas e presentes no mercado. Porém, em muitos casos, as demandas por parte da indústria por novas funcionalidades e propriedades de materiais está à frente da maturidade das tecnologias em nível de pesquisa básica, tornando mais desafiadora a pesquisa aplicada para o desenvolvimento de novos produtos. Esta apresentação tem como objetivo, apresentar algumas destas demandas à comunidade acadêmica, incentivando esforços para pesquisa básica em alguns pontos chave, de forma a facilitar no futuro a aplicação de novas tecnologias. Serão apresentadas também algumas tendências e exemplos de casos onde vêm ocorrendo inovações significativas, especialmente na área de tecnologias de plasma para modificação de superfícies. As tendências mostram um aumento da multidisciplinariedade na área, criando interações entre engenharia de materiais, engenharia mecânica, elétrica e computação de forma a criar equipamentos e processos inovadores.
Seminário proferido pelo pesquisador Thiago Burgo (Unicamp) em 26 de agosto de 2015 para cerca de 20 estudantes e professores, na seção UCS (Caxias do Sul, RS) do Instituto Nacional de Engenharia de Superfícies.
Seminário apresentado pelo professor Vladimir Trava Airoldi, da seção INPE do Instituto Nacional de Engenharia de Superfícies, em Caxias do Sul, na seção UCS do Instituto, no dia 4 de agosto de 2015, para cerca de 20 estudantes e professores.
Resumo de trabalho sobre o fenômeno de superlubrificação entre superfícies cerâmicas realizado no Laboratório de Fenômenos de Superfície, associado ao Instituto Nacional de Engenharia de Superfícies.
Invited lecture of the Simposium N "Surface Engineering - functional coatings and modified surfaces" at the XIII SBPMat (Brazilian MRS) meeting, in João Pessoa (Brazil). The lecture took place on September 29th, 2014.
The speaker was Tiberiu Minea, Professor at Université Paris-Sud (France), President of the French Federation of Scientific Societies and President of the Scientific and Technical Committee at the French Vacuum Society.
Invited lecture of the Simposium N "Surface Engineering - functional coatings and modified surfaces" at the XIII SBPMat (Brazilian MRS) meeting, in João Pessoa (Brazil). The lecture took place on September 29th, 2014.
The speaker was Prof. Amilton Sinatora (Escola Politécnica da USP, São Paulo state, Brazil).
Invited lecture of the Simposium N "Surface Engineering - functional coatings and modified surfaces" at the XIII SBPMat (Brazilian MRS) meeting, in João Pessoa (Brazil). The lecture took place on September 29th, 2014.
The speaker was Christopher Muratore, "Wright Brothers Institute Endowed Chair Professor" at the Department of Chemical and Materials Engineering from University of Dayton (USA).
Invited lecture of the Simposium N "Surface Engineering - functional coatings and modified surfaces" at the XIII SBPMat (Brazilian MRS) meeting, in João Pessoa (Brazil). The lecture took place on September 30th, 2014.
The speaker was Professor Christoph Genzel, from the Helmholtz-Zentrum Berlin für Materialien und Energie (HZB), in Germany, where he heads the Department of Microstructure and Residual Stress Analysis and he coordinates a group of diffraction and scattering. Genzel is also Associate Professor at the Technische Universität Berlin.
Workshop oferecido no dia 26 de agosto de 2014 na Universidade de Caxias do Sul (UCS) pelo professor Deniol Tanaka, professor titular da Escola Politécnica da USP (EPUSP), doutor em Engenharia Metalúrgica pela EPUSP, mestre em Ciências pelo ITA e engenheiro mecânico pela UNESP. O workshop foi realizado com a participação de cerca de 40 pessoas, entre outras, graduandos de Engenharias e Fotografia, mestrandos e doutorandos de Materiais e profissionais de empresas.
A workshop formou parte da programação do 1º Seminário de Tecnologia, Inovação e Desenvolvimento Social do Centro de Ciências Exatas e da Tecnologia (CCET) da UCS e foi patrocinado pelo Instituto Nacional de Engenharia de Superfícies.
ATENÇÃO: O arquivo original desta apresentação tem várias animações. Faça download do arquivo se deseja apreciar a apresentação com animações.
Palestra proferida pelo professor Deniol Tanaka (Escola Politécnica da USP), estudioso de Leonardo da Vinci desde a década de 1970. A apresentação ocorreu no UCS Teatro (teatro da Universidade de Caxias do Sul, UCS, no Rio Grande do Sul) na noite de 25 de agosto de 2014, com um público de cerca de 800 pessoas. Foi a palestra inaugural do 1º Seminário de Tecnologia, Inovação e Desenvolvimento Social do Centro de Ciências Exatas e da Tecnologia (CCET) da UCS e também a palestra comemorativa dos 10 anos do Programa de Pós-Graduação em Materiais (PGMAT) da UCS. A palestra foi patrocinada pelo Instituto Nacional de Engenharia de Superfícies.
ATENÇÃO: O arquivo original desta apresentação tem várias animações. Faça download do arquivo se deseja apreciar a apresentação com animações.
Seminário proferido por Iñigo Braceras Izagirre, do Centro de P,D e I TECNALIA (San Sebastián, Espanha) na seção UCS do Instituto Nacional de Engenharia de Superfícies, no dia 17 de abril para um público de cerca de 30 estudantes e professores.
Arquivo do seminário proferido no dia 29 de agosto pelo professor Roberto Martins (USP) na seção UCS do Instituto Nacional de Engenharia de Superfícies sobre métodos numéricos na análise de esforços de contato em sistemas com e sem revestimento para um público de cerca de 20 estudantes de graduação e pós e professores.
Arquivo do seminário apresentado pelo professor Fernando Alvarez, pesquisador da seção Unicamp do Instituto Nacional de Engenharia de Superfícies, no dia 20 de agosto de 2013, na seção UCS do Instituto, para um público de 30 estudantes e professores de cursos de graduação e pós-graduação.
Arquivo do seminário apresentado pelo doutor Alexandre Martins Barros, diretor do Instituto SENAI de Inovação em Engenharia de Superfícies, no dia 4 de abril na seção UCS do Instituto Nacional de Engenharia de Superfícies para um público de 30 estudantes e professores.
Palestra apresentada por Carlos A. Figueroa, co-fundador da Plasmar Tecnologia (empresa spinoff da seção UCS do Instituto Nacional de Engenharia de Superfícies), na Câmara de Indústria, Comércio e Serviços de Caxias do Sul em 24 de agosto de 2012 para cerca de 200 pessoas e na Universidade de Caxias do Sul, no dia 1° de novembro, para cerca de 20 professores e estudantes.
Este livro eletrônico reúne 17 artigos de divulgação escritos por pesquisadores do Instituto Nacional de Engenharia de Superfícies sobre processos, materiais, aplicações e métodos da engenharia de superfícies. Faça download aqui ou entre em contato para solicitar o PDF: http://engenhariadesuperficies.com.br/fale-conosco.asp.
Versão do seminário apresentado por Celia Olivero (Horiba) na seção UCS do Instituto Nacional de Engenharia de Superfícies no dia 28 de junho para um público de 18 estudantes, professores e profissionais de empresas.
Apresentado pelo professor Israel Baumvol para lideranças dos sindicatos parceiros da seção UCS do Instituto, na CIC-Caxias do Sul no dia 27 de junho de 2012.
Apresentado pelo professor Thierry Czerwiec (Institut Jean Lamour, Nancy, France) no dia 12 de junho na Universidade de Caxias do Sul, em seminário realizado pelo Instituto Nacional de Engenharia de Superfícies e o PGMAT da UCS para um público de 16 estudantes e professores.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
More Related Content
More from Instituto Nacional de Engenharia de Superfícies
Seminário proferido na Universidade de Caxias do Sul em junho de 2017 para estudantes de graduação e pós-graduação pelo prof. Carlos A. Figueroa, pesquisador da seção UCS do Instituto.
Palestra proferida na seção UCS do Instituto em 04/04/17 por Felipe de Campos Carreri, pesquisador no Instituto SENAI de Inovação em Engenharia de Superfícies, Belo Horizonte. Diversos produtos e materiais com quem todos temos contato no dia-a-dia se devem à inovações na área de Engenharia de Superfícies. A necessidade de inovar se torna cada vez mais clara às indústrias que desejam se manter competitivas e presentes no mercado. Porém, em muitos casos, as demandas por parte da indústria por novas funcionalidades e propriedades de materiais está à frente da maturidade das tecnologias em nível de pesquisa básica, tornando mais desafiadora a pesquisa aplicada para o desenvolvimento de novos produtos. Esta apresentação tem como objetivo, apresentar algumas destas demandas à comunidade acadêmica, incentivando esforços para pesquisa básica em alguns pontos chave, de forma a facilitar no futuro a aplicação de novas tecnologias. Serão apresentadas também algumas tendências e exemplos de casos onde vêm ocorrendo inovações significativas, especialmente na área de tecnologias de plasma para modificação de superfícies. As tendências mostram um aumento da multidisciplinariedade na área, criando interações entre engenharia de materiais, engenharia mecânica, elétrica e computação de forma a criar equipamentos e processos inovadores.
Seminário proferido pelo pesquisador Thiago Burgo (Unicamp) em 26 de agosto de 2015 para cerca de 20 estudantes e professores, na seção UCS (Caxias do Sul, RS) do Instituto Nacional de Engenharia de Superfícies.
Seminário apresentado pelo professor Vladimir Trava Airoldi, da seção INPE do Instituto Nacional de Engenharia de Superfícies, em Caxias do Sul, na seção UCS do Instituto, no dia 4 de agosto de 2015, para cerca de 20 estudantes e professores.
Resumo de trabalho sobre o fenômeno de superlubrificação entre superfícies cerâmicas realizado no Laboratório de Fenômenos de Superfície, associado ao Instituto Nacional de Engenharia de Superfícies.
Invited lecture of the Simposium N "Surface Engineering - functional coatings and modified surfaces" at the XIII SBPMat (Brazilian MRS) meeting, in João Pessoa (Brazil). The lecture took place on September 29th, 2014.
The speaker was Tiberiu Minea, Professor at Université Paris-Sud (France), President of the French Federation of Scientific Societies and President of the Scientific and Technical Committee at the French Vacuum Society.
Invited lecture of the Simposium N "Surface Engineering - functional coatings and modified surfaces" at the XIII SBPMat (Brazilian MRS) meeting, in João Pessoa (Brazil). The lecture took place on September 29th, 2014.
The speaker was Prof. Amilton Sinatora (Escola Politécnica da USP, São Paulo state, Brazil).
Invited lecture of the Simposium N "Surface Engineering - functional coatings and modified surfaces" at the XIII SBPMat (Brazilian MRS) meeting, in João Pessoa (Brazil). The lecture took place on September 29th, 2014.
The speaker was Christopher Muratore, "Wright Brothers Institute Endowed Chair Professor" at the Department of Chemical and Materials Engineering from University of Dayton (USA).
Invited lecture of the Simposium N "Surface Engineering - functional coatings and modified surfaces" at the XIII SBPMat (Brazilian MRS) meeting, in João Pessoa (Brazil). The lecture took place on September 30th, 2014.
The speaker was Professor Christoph Genzel, from the Helmholtz-Zentrum Berlin für Materialien und Energie (HZB), in Germany, where he heads the Department of Microstructure and Residual Stress Analysis and he coordinates a group of diffraction and scattering. Genzel is also Associate Professor at the Technische Universität Berlin.
Workshop oferecido no dia 26 de agosto de 2014 na Universidade de Caxias do Sul (UCS) pelo professor Deniol Tanaka, professor titular da Escola Politécnica da USP (EPUSP), doutor em Engenharia Metalúrgica pela EPUSP, mestre em Ciências pelo ITA e engenheiro mecânico pela UNESP. O workshop foi realizado com a participação de cerca de 40 pessoas, entre outras, graduandos de Engenharias e Fotografia, mestrandos e doutorandos de Materiais e profissionais de empresas.
A workshop formou parte da programação do 1º Seminário de Tecnologia, Inovação e Desenvolvimento Social do Centro de Ciências Exatas e da Tecnologia (CCET) da UCS e foi patrocinado pelo Instituto Nacional de Engenharia de Superfícies.
ATENÇÃO: O arquivo original desta apresentação tem várias animações. Faça download do arquivo se deseja apreciar a apresentação com animações.
Palestra proferida pelo professor Deniol Tanaka (Escola Politécnica da USP), estudioso de Leonardo da Vinci desde a década de 1970. A apresentação ocorreu no UCS Teatro (teatro da Universidade de Caxias do Sul, UCS, no Rio Grande do Sul) na noite de 25 de agosto de 2014, com um público de cerca de 800 pessoas. Foi a palestra inaugural do 1º Seminário de Tecnologia, Inovação e Desenvolvimento Social do Centro de Ciências Exatas e da Tecnologia (CCET) da UCS e também a palestra comemorativa dos 10 anos do Programa de Pós-Graduação em Materiais (PGMAT) da UCS. A palestra foi patrocinada pelo Instituto Nacional de Engenharia de Superfícies.
ATENÇÃO: O arquivo original desta apresentação tem várias animações. Faça download do arquivo se deseja apreciar a apresentação com animações.
Seminário proferido por Iñigo Braceras Izagirre, do Centro de P,D e I TECNALIA (San Sebastián, Espanha) na seção UCS do Instituto Nacional de Engenharia de Superfícies, no dia 17 de abril para um público de cerca de 30 estudantes e professores.
Arquivo do seminário proferido no dia 29 de agosto pelo professor Roberto Martins (USP) na seção UCS do Instituto Nacional de Engenharia de Superfícies sobre métodos numéricos na análise de esforços de contato em sistemas com e sem revestimento para um público de cerca de 20 estudantes de graduação e pós e professores.
Arquivo do seminário apresentado pelo professor Fernando Alvarez, pesquisador da seção Unicamp do Instituto Nacional de Engenharia de Superfícies, no dia 20 de agosto de 2013, na seção UCS do Instituto, para um público de 30 estudantes e professores de cursos de graduação e pós-graduação.
Arquivo do seminário apresentado pelo doutor Alexandre Martins Barros, diretor do Instituto SENAI de Inovação em Engenharia de Superfícies, no dia 4 de abril na seção UCS do Instituto Nacional de Engenharia de Superfícies para um público de 30 estudantes e professores.
Palestra apresentada por Carlos A. Figueroa, co-fundador da Plasmar Tecnologia (empresa spinoff da seção UCS do Instituto Nacional de Engenharia de Superfícies), na Câmara de Indústria, Comércio e Serviços de Caxias do Sul em 24 de agosto de 2012 para cerca de 200 pessoas e na Universidade de Caxias do Sul, no dia 1° de novembro, para cerca de 20 professores e estudantes.
Este livro eletrônico reúne 17 artigos de divulgação escritos por pesquisadores do Instituto Nacional de Engenharia de Superfícies sobre processos, materiais, aplicações e métodos da engenharia de superfícies. Faça download aqui ou entre em contato para solicitar o PDF: http://engenhariadesuperficies.com.br/fale-conosco.asp.
Versão do seminário apresentado por Celia Olivero (Horiba) na seção UCS do Instituto Nacional de Engenharia de Superfícies no dia 28 de junho para um público de 18 estudantes, professores e profissionais de empresas.
Apresentado pelo professor Israel Baumvol para lideranças dos sindicatos parceiros da seção UCS do Instituto, na CIC-Caxias do Sul no dia 27 de junho de 2012.
Apresentado pelo professor Thierry Czerwiec (Institut Jean Lamour, Nancy, France) no dia 12 de junho na Universidade de Caxias do Sul, em seminário realizado pelo Instituto Nacional de Engenharia de Superfícies e o PGMAT da UCS para um público de 16 estudantes e professores.
More from Instituto Nacional de Engenharia de Superfícies (20)
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
The Metaverse and AI: how can decision-makers harness the Metaverse for their...Jen Stirrup
The Metaverse is popularized in science fiction, and now it is becoming closer to being a part of our daily lives through the use of social media and shopping companies. How can businesses survive in a world where Artificial Intelligence is becoming the present as well as the future of technology, and how does the Metaverse fit into business strategy when futurist ideas are developing into reality at accelerated rates? How do we do this when our data isn't up to scratch? How can we move towards success with our data so we are set up for the Metaverse when it arrives?
How can you help your company evolve, adapt, and succeed using Artificial Intelligence and the Metaverse to stay ahead of the competition? What are the potential issues, complications, and benefits that these technologies could bring to us and our organizations? In this session, Jen Stirrup will explain how to start thinking about these technologies as an organisation.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Enhancing Performance with Globus and the Science DMZGlobus
ESnet has led the way in helping national facilities—and many other institutions in the research community—configure Science DMZs and troubleshoot network issues to maximize data transfer performance. In this talk we will present a summary of approaches and tips for getting the most out of your network infrastructure using Globus Connect Server.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.