This document provides step-by-step instructions for turning a person's face into a latex Halloween mask. It begins by taking a lifecast of the face using alginate, then creating a plaster mold. From this mold, a clay copy is made and sculpted to add deformities and create a "monster mask". Another mold is made from the clay sculpture and latex is poured in to create the final mask. The mask is then painted to resemble diseased and decaying flesh.
French polishing is a process of coating wood with shellac dissolved in alcohol using a "rubber" made of rag and cotton wool. It produces a fine looking finish for furniture. The process involves bodying in the shellac to fill pores, building up layers, and spiriting out for a high gloss finish. Proper preparation of the wood surface is important for a smooth result.
Creating a two piece mold involves:
1) Sinking the pattern into clay until half is exposed to create the parting line.
2) Applying vents and inlets before pouring the second half of silicone.
3) Pouring the second half of silicone carefully to avoid disturbing the vents and inlets.
The document discusses common painting problems and how to avoid and remedy them. It identifies 13 specific problems including brushmarks, flaking, runs, specks and more. For each problem, it explains the likely causes and provides tips on proper surface preparation and application techniques to prevent issues. Safety precautions are also outlined when working with paints, especially older paints containing lead. Proper equipment, preparation, application and cleaning can help avoid most common painting problems.
A carpet has an essential role in making a room interior elegant and cozy. In some situations it also helps to protect expensive flooring. If you are searching for easy carpet cleaning tricks to maintain its beauty for a long period of time.
( https://kreatecube.com/blog/home-decor/carpet-cleaning-tricks-and-tips )
Here are some smart diy carpet cleaning tips.
1. Shaving Foam for Normal Dirt
2. Ice Cube Trick for Chewing Gum
3. Prevent Carpets with Shoe Caps
4. Remove Wax with Iron
5. Power of Dishwashing Agent
6. Blood Drops Removing Solution
7. Deal with Pet’s Dirt
8. Why not Use Vacuum Cleaner
Regular cleaning and maintenance is important to keep floors looking good and lasting longer. For vinyl, use a damp cloth with warm water and detergent. For laminate, vacuum or wipe with a damp mop and cleaning solution. Wood floors can be wiped with a buffing cloth or swept, and cleaned occasionally with a damp cloth and wood cleaner. Quick cleaning is better than waiting, as dirt and stains will set in. Hardwood floors require vacuuming and dusting weekly, and cleaning with products made for hardwood to avoid damage. Proper care includes avoiding water, ammonia, or wax on finished floors.
This document provides instructions for interior painting. It discusses preparing surfaces by removing fixtures, filling cracks and holes, washing surfaces, and sanding. It recommends starting at the top of walls and working down, painting in sections to avoid visible lines. Woodwork preparation involves washing, sanding, and priming bare wood. The instructions emphasize preparation, using the proper tools, and working systematically to achieve a smooth, professional finish.
Majoras' mask accurate replica tutorial cosjj.comkingdayone
Here, at cosjj.com, we have several talented designers and tailors and years costume production experience. The lowest price is not we are chasing. It’s the result due to the hard works we put in this business. We know how much you care about cosplay and how important a quality cosplay costume can be! Go visit at http://www.cosjj.com/ and find a perfect cosplay costume for your upcoming cosplay show!! Any question please feel free to contact us via info@cosjj.com .
1. Analysis of graffiti removal techniques.
2. Graffiti Removal Chemicals.
3. Current methods of graffiti removal.
4. Various Graffiti Removal Products.
5. Tools and techniques for removing graffiti.
6. How do you remove graffiti from brick?
7. How do you remove graffiti from metal?
8. Tips for Removing Graffiti From Wood, Plastic.
French polishing is a process of coating wood with shellac dissolved in alcohol using a "rubber" made of rag and cotton wool. It produces a fine looking finish for furniture. The process involves bodying in the shellac to fill pores, building up layers, and spiriting out for a high gloss finish. Proper preparation of the wood surface is important for a smooth result.
Creating a two piece mold involves:
1) Sinking the pattern into clay until half is exposed to create the parting line.
2) Applying vents and inlets before pouring the second half of silicone.
3) Pouring the second half of silicone carefully to avoid disturbing the vents and inlets.
The document discusses common painting problems and how to avoid and remedy them. It identifies 13 specific problems including brushmarks, flaking, runs, specks and more. For each problem, it explains the likely causes and provides tips on proper surface preparation and application techniques to prevent issues. Safety precautions are also outlined when working with paints, especially older paints containing lead. Proper equipment, preparation, application and cleaning can help avoid most common painting problems.
A carpet has an essential role in making a room interior elegant and cozy. In some situations it also helps to protect expensive flooring. If you are searching for easy carpet cleaning tricks to maintain its beauty for a long period of time.
( https://kreatecube.com/blog/home-decor/carpet-cleaning-tricks-and-tips )
Here are some smart diy carpet cleaning tips.
1. Shaving Foam for Normal Dirt
2. Ice Cube Trick for Chewing Gum
3. Prevent Carpets with Shoe Caps
4. Remove Wax with Iron
5. Power of Dishwashing Agent
6. Blood Drops Removing Solution
7. Deal with Pet’s Dirt
8. Why not Use Vacuum Cleaner
Regular cleaning and maintenance is important to keep floors looking good and lasting longer. For vinyl, use a damp cloth with warm water and detergent. For laminate, vacuum or wipe with a damp mop and cleaning solution. Wood floors can be wiped with a buffing cloth or swept, and cleaned occasionally with a damp cloth and wood cleaner. Quick cleaning is better than waiting, as dirt and stains will set in. Hardwood floors require vacuuming and dusting weekly, and cleaning with products made for hardwood to avoid damage. Proper care includes avoiding water, ammonia, or wax on finished floors.
This document provides instructions for interior painting. It discusses preparing surfaces by removing fixtures, filling cracks and holes, washing surfaces, and sanding. It recommends starting at the top of walls and working down, painting in sections to avoid visible lines. Woodwork preparation involves washing, sanding, and priming bare wood. The instructions emphasize preparation, using the proper tools, and working systematically to achieve a smooth, professional finish.
Majoras' mask accurate replica tutorial cosjj.comkingdayone
Here, at cosjj.com, we have several talented designers and tailors and years costume production experience. The lowest price is not we are chasing. It’s the result due to the hard works we put in this business. We know how much you care about cosplay and how important a quality cosplay costume can be! Go visit at http://www.cosjj.com/ and find a perfect cosplay costume for your upcoming cosplay show!! Any question please feel free to contact us via info@cosjj.com .
1. Analysis of graffiti removal techniques.
2. Graffiti Removal Chemicals.
3. Current methods of graffiti removal.
4. Various Graffiti Removal Products.
5. Tools and techniques for removing graffiti.
6. How do you remove graffiti from brick?
7. How do you remove graffiti from metal?
8. Tips for Removing Graffiti From Wood, Plastic.
TheCrowdCafe | Investment Crowdfunding Presentation Jonathan Sandlund
Check out thecrowdcafe.com for research and data on the investment crowdfunding industry.
Presentation delivered at the Silicon Valley Crowdfund Conference on April 5, 2013
Twitter: @jsandlund
LinkedIn: www.linkedin.com/in/jsandlund
O trabalho de Karl Marx O 18 de Brumário de Luís Bonaparte (em alemão: "Der achtzehnte Brumaire des Louis Bonaparte"), escrito entre dezembro de 1851 e março de 18521 , publicado originalmente na revista Die Revolution, parte da análise concreta dos acontecimentos revolucionários em França, entre 1848 e 1851, que levaram ao golpe de estado pelo qual Napoleão III se nomeou imperador, à semelhança de seu tio Napoleão I .
Nesse trabalho, são desenvolvidas as teses fundamentais do materialismo histórico: a teoria da luta de classes e da revolução proletária, a doutrina do Estado e da ditadura do proletariado. Destaca-se a conclusão de Marx sobre a questão da atitude do proletariado em relação ao Estado burguês: "Todas as revoluções aperfeiçoavam esta máquina em vez de a destruir". A questão campesinato como aliado da classe operária na revolução iminente, o papel dos partidos políticos na vida social e uma caracterização profunda da essência do bonapartismo são outros aspectos marcantes desta obra
TheCrowdCafe: Global Crowdinvesting Industry Presentation Jonathan Sandlund
This document discusses the emerging investment crowdfunding industry and the impact of the JOBS Act. It summarizes data on global crowdfunding deals and regulations allowing general solicitation. The JOBS Act represents the first major change to securities law in over 70 years by allowing internet platforms to facilitate private capital raising, creating a more efficient process. Cultural trends also support crowdfunding as individuals seek more meaningful investment opportunities.
To make a latex mask:
1. Sculpt the mask shape out of clay on an armature like a foam head or wire frame.
2. Make a plaster mold by coating the clay sculpture in layers of plaster.
3. Once the plaster mold has hardened, remove the clay and pour liquid latex rubber into the mold to create the mask.
4. Let the latex mask dry fully before removing it from the mold. Cut out eye and mouth holes and paint the mask to complete it.
The Newest Art Form Doll Rebirthing - Terry QuinnEd Mccormick
Discover 'The Newest Art Form Doll'—a captivating blend of craftsmanship and imagination, where tradition meets modernity in stunning, collectible pieces.
This document provides instructions for various paint effect techniques that can be used to decorate walls and surfaces. Some of the simplest techniques only require inexpensive tools and materials. The techniques covered include color washing, rag rolling, bagging, combing, graining, sponging, stippling and stenciling. Most techniques involve applying a glaze over a dried basecoat paint to add texture and visual interest to surfaces. Proper preparation and practicing techniques on sample boards before large projects is recommended for best results.
Danelle created a chew toy for dogs to help clean their teeth. The toy has silicone spikes and a rubber material that brush against teeth and gums while remaining flexible and non-toxic. She designed the toy to meet criteria of helping clean teeth while still looking like a regular chew toy. Danelle made a clay model, created a mold using silicone and dish soap, and cast multiple silicone chew toys using cornstarch mixed with silicone. She provides recommendations for improving the process, such as using oven-hardening clay and being precise with mold-making.
This document provides information on two printing processes: Lumi printing and burnt-out printing.
Lumi printing uses Inkodye and sunlight to print vivid imagery onto natural materials like cotton and leather without chemical treatment. It was invented in the 2000s and allows for photographic prints that are colorfast after washing. Burnt-out printing uses acids instead of dyes to destroy fibers in certain areas and create designed holes in blended fabrics. Developed in the 1920s, it involves a multi-step process of applying, drying, heating and washing the fabric. Both processes produce unique printed effects but burnt-out printing requires more safety precautions due to the use of acids.
SYTECH is a leading supplier of signage and graphics solutions. They offer three products for removing vinyl, adhesive, and oxidation from surfaces: Vinyl-Off removes vinyl graphics in 5-15 minutes without scraping; Adhesive-Off quickly dissolves adhesive residue; and Ghost-Off eliminates "ghost images" of removed vinyl in a simple 3-step process. The document provides instructions for safely and effectively using each product.
Mosaics have been around for thousands of years, dating back to around 2000 BC. Large mosaics are made by assembling small tiles or pieces of material to form a picture. The cost of mosaics can range widely, from $50 for a small piece to over $1000 for a large, professionally made mosaic. To finish a mosaic, the tiles are grouted together using a process that involves mixing grout, applying it between the tiles, smoothing it, and cleaning to reveal the final piece.
Inflatable repairs can be done to a great standard with a little planning and the right place to do the repairs. Or Nanaimo Boat Yard have a team on hand.
This document provides dos and don'ts for working with ceramics and glazes. It instructs the reader to cover clay with plastic to prevent drying, clean work areas, hollow out sculptural forms, handle pieces carefully, and sign pieces. It also advises asking before using glazes, glazing bisqueware only, washing pieces, using food-safe glazes, and applying glaze in thin coats. Improper practices warned against include leaving clay bags open, poking holes in clay bags, and mixing glazes.
This document provides an overview of training tools and modules for direct selling provided by SPBM (Success Principles By Modicare). It includes sections on learning anytime anywhere through their world class training support. The training tools allow learning modules on products and business as well as classroom, online, and phone training. It also highlights Samir Modi as the Managing Director and founder of Modicare, which is India's first direct selling company known for its diverse products and affordable prices.
Screen Printing With Water Based Inks: 5 SolutionsPrintavo
So many screen printing shops have a hard time working with water based inks.
It's not that water based inks are difficult. It's that most shops don't know where to start. They don't know they might want to get a reptile fogger (but I promise more on that later).
This article will answer 5 common questions about water based inks and give you tips you can use in your shop to get the most out of this exciting medium. There's some basic concepts to understand about working with water based inks before we dive in:
The less water you have in your ink, the harder it is to work with. Water based ink has lots of water in it (seems obvious, right?). But as the ink loses water, it becomes stubborn and hard to work with.
Think about water based ink like it's blood. If you get a small cut, it scabs up quickly. But a larger wound has flowing blood and won't immediately scab up or dry out.
Keep it moist, keep it moving. You've got to manage water based inks so they don't dry out and give you issues.
Let's go further into these eco-friendly, super-soft, ultra-durable, 100% breathable inks!
This document provides instructions for painting and wiring a hot rod guitar. It includes a list of 21 supplies needed for the painting project, such as auto paint, primer, clear coat, sandpaper, masking tape, plastic tape for flames, bondo filler, and rubbing/finishing compounds. The list also recommends safety gear like a face mask and supplies for cleaning like lacquer thinner. The instructions state that painting flames and gradients with spray cans requires practice but following the steps will result in a guitar that looks as good as the one on the cover.
1. This tutorial teaches how to create a photo caricature in Adobe Photoshop by exaggerating facial features through transforming, warping, and liquifying layers extracted from a portrait photo.
2. Key steps include isolating facial features like the head, chin, mouth, and nose into individual layers, transforming layers to exaggerate proportions, using the liquify filter to further distort features, and applying artistic effects to make it look like a painted caricature.
3. Techniques like enlarging the head, elongating the chin, expanding the mouth and nose, and warping the eyes and forehead through liquifying are used to comically exaggerate the facial features into a caricatured representation of the
The document discusses studies on producing a crackle finish on cowhide leather. It begins with acknowledgments and then defines what a crackle finish is, which creates a cracked paint effect. It discusses applying two paint colors - a base coat and top coat separated by a crackling medium. The top coat cracks to reveal the underlying base coat. The document outlines the aim of producing crackle finished leather, presents samples, and discusses physical and chemical test results. It concludes that crackle finish increases the value of lower grade leather and utilizes split leather byproducts.
TheCrowdCafe | Investment Crowdfunding Presentation Jonathan Sandlund
Check out thecrowdcafe.com for research and data on the investment crowdfunding industry.
Presentation delivered at the Silicon Valley Crowdfund Conference on April 5, 2013
Twitter: @jsandlund
LinkedIn: www.linkedin.com/in/jsandlund
O trabalho de Karl Marx O 18 de Brumário de Luís Bonaparte (em alemão: "Der achtzehnte Brumaire des Louis Bonaparte"), escrito entre dezembro de 1851 e março de 18521 , publicado originalmente na revista Die Revolution, parte da análise concreta dos acontecimentos revolucionários em França, entre 1848 e 1851, que levaram ao golpe de estado pelo qual Napoleão III se nomeou imperador, à semelhança de seu tio Napoleão I .
Nesse trabalho, são desenvolvidas as teses fundamentais do materialismo histórico: a teoria da luta de classes e da revolução proletária, a doutrina do Estado e da ditadura do proletariado. Destaca-se a conclusão de Marx sobre a questão da atitude do proletariado em relação ao Estado burguês: "Todas as revoluções aperfeiçoavam esta máquina em vez de a destruir". A questão campesinato como aliado da classe operária na revolução iminente, o papel dos partidos políticos na vida social e uma caracterização profunda da essência do bonapartismo são outros aspectos marcantes desta obra
TheCrowdCafe: Global Crowdinvesting Industry Presentation Jonathan Sandlund
This document discusses the emerging investment crowdfunding industry and the impact of the JOBS Act. It summarizes data on global crowdfunding deals and regulations allowing general solicitation. The JOBS Act represents the first major change to securities law in over 70 years by allowing internet platforms to facilitate private capital raising, creating a more efficient process. Cultural trends also support crowdfunding as individuals seek more meaningful investment opportunities.
To make a latex mask:
1. Sculpt the mask shape out of clay on an armature like a foam head or wire frame.
2. Make a plaster mold by coating the clay sculpture in layers of plaster.
3. Once the plaster mold has hardened, remove the clay and pour liquid latex rubber into the mold to create the mask.
4. Let the latex mask dry fully before removing it from the mold. Cut out eye and mouth holes and paint the mask to complete it.
The Newest Art Form Doll Rebirthing - Terry QuinnEd Mccormick
Discover 'The Newest Art Form Doll'—a captivating blend of craftsmanship and imagination, where tradition meets modernity in stunning, collectible pieces.
This document provides instructions for various paint effect techniques that can be used to decorate walls and surfaces. Some of the simplest techniques only require inexpensive tools and materials. The techniques covered include color washing, rag rolling, bagging, combing, graining, sponging, stippling and stenciling. Most techniques involve applying a glaze over a dried basecoat paint to add texture and visual interest to surfaces. Proper preparation and practicing techniques on sample boards before large projects is recommended for best results.
Danelle created a chew toy for dogs to help clean their teeth. The toy has silicone spikes and a rubber material that brush against teeth and gums while remaining flexible and non-toxic. She designed the toy to meet criteria of helping clean teeth while still looking like a regular chew toy. Danelle made a clay model, created a mold using silicone and dish soap, and cast multiple silicone chew toys using cornstarch mixed with silicone. She provides recommendations for improving the process, such as using oven-hardening clay and being precise with mold-making.
This document provides information on two printing processes: Lumi printing and burnt-out printing.
Lumi printing uses Inkodye and sunlight to print vivid imagery onto natural materials like cotton and leather without chemical treatment. It was invented in the 2000s and allows for photographic prints that are colorfast after washing. Burnt-out printing uses acids instead of dyes to destroy fibers in certain areas and create designed holes in blended fabrics. Developed in the 1920s, it involves a multi-step process of applying, drying, heating and washing the fabric. Both processes produce unique printed effects but burnt-out printing requires more safety precautions due to the use of acids.
SYTECH is a leading supplier of signage and graphics solutions. They offer three products for removing vinyl, adhesive, and oxidation from surfaces: Vinyl-Off removes vinyl graphics in 5-15 minutes without scraping; Adhesive-Off quickly dissolves adhesive residue; and Ghost-Off eliminates "ghost images" of removed vinyl in a simple 3-step process. The document provides instructions for safely and effectively using each product.
Mosaics have been around for thousands of years, dating back to around 2000 BC. Large mosaics are made by assembling small tiles or pieces of material to form a picture. The cost of mosaics can range widely, from $50 for a small piece to over $1000 for a large, professionally made mosaic. To finish a mosaic, the tiles are grouted together using a process that involves mixing grout, applying it between the tiles, smoothing it, and cleaning to reveal the final piece.
Inflatable repairs can be done to a great standard with a little planning and the right place to do the repairs. Or Nanaimo Boat Yard have a team on hand.
This document provides dos and don'ts for working with ceramics and glazes. It instructs the reader to cover clay with plastic to prevent drying, clean work areas, hollow out sculptural forms, handle pieces carefully, and sign pieces. It also advises asking before using glazes, glazing bisqueware only, washing pieces, using food-safe glazes, and applying glaze in thin coats. Improper practices warned against include leaving clay bags open, poking holes in clay bags, and mixing glazes.
This document provides an overview of training tools and modules for direct selling provided by SPBM (Success Principles By Modicare). It includes sections on learning anytime anywhere through their world class training support. The training tools allow learning modules on products and business as well as classroom, online, and phone training. It also highlights Samir Modi as the Managing Director and founder of Modicare, which is India's first direct selling company known for its diverse products and affordable prices.
Screen Printing With Water Based Inks: 5 SolutionsPrintavo
So many screen printing shops have a hard time working with water based inks.
It's not that water based inks are difficult. It's that most shops don't know where to start. They don't know they might want to get a reptile fogger (but I promise more on that later).
This article will answer 5 common questions about water based inks and give you tips you can use in your shop to get the most out of this exciting medium. There's some basic concepts to understand about working with water based inks before we dive in:
The less water you have in your ink, the harder it is to work with. Water based ink has lots of water in it (seems obvious, right?). But as the ink loses water, it becomes stubborn and hard to work with.
Think about water based ink like it's blood. If you get a small cut, it scabs up quickly. But a larger wound has flowing blood and won't immediately scab up or dry out.
Keep it moist, keep it moving. You've got to manage water based inks so they don't dry out and give you issues.
Let's go further into these eco-friendly, super-soft, ultra-durable, 100% breathable inks!
This document provides instructions for painting and wiring a hot rod guitar. It includes a list of 21 supplies needed for the painting project, such as auto paint, primer, clear coat, sandpaper, masking tape, plastic tape for flames, bondo filler, and rubbing/finishing compounds. The list also recommends safety gear like a face mask and supplies for cleaning like lacquer thinner. The instructions state that painting flames and gradients with spray cans requires practice but following the steps will result in a guitar that looks as good as the one on the cover.
1. This tutorial teaches how to create a photo caricature in Adobe Photoshop by exaggerating facial features through transforming, warping, and liquifying layers extracted from a portrait photo.
2. Key steps include isolating facial features like the head, chin, mouth, and nose into individual layers, transforming layers to exaggerate proportions, using the liquify filter to further distort features, and applying artistic effects to make it look like a painted caricature.
3. Techniques like enlarging the head, elongating the chin, expanding the mouth and nose, and warping the eyes and forehead through liquifying are used to comically exaggerate the facial features into a caricatured representation of the
The document discusses studies on producing a crackle finish on cowhide leather. It begins with acknowledgments and then defines what a crackle finish is, which creates a cracked paint effect. It discusses applying two paint colors - a base coat and top coat separated by a crackling medium. The top coat cracks to reveal the underlying base coat. The document outlines the aim of producing crackle finished leather, presents samples, and discusses physical and chemical test results. It concludes that crackle finish increases the value of lower grade leather and utilizes split leather byproducts.
Resin casting is a method of plastic casting where a mold is filled with liquid synthetic resin that then hardens. The process involves measuring the resin and catalyst amounts needed, thoroughly mixing them, pouring the resin into the mold in layers, allowing each layer to gel before adding embedments or additional layers, and finishing the back of the casting. Defects like air bubbles can be prevented by pouring some resin into the mold before adding embedments and gently pressing them to release trapped bubbles.
The document provides tips for furniture finishing and repair. It discusses how to remove waxy build-up, hide light scratches, paint over an existing finish, remove white spots from water, and tips for handling and moving furniture. Key points include using mineral spirits or steel wool to remove waxy build-up, using padding lacquer or polishing compounds to hide light scratches, thorough sanding and cleaning when painting over a finish, and using steel wool or oils to remove white spots from water damage.
Youwill need to supply a roller frame and extension pole,and stiff bristle shop broom.ArmorChipmust be applied
between 60-90 deg F and when relative humidity is 80%or less.
This document provides guidelines from the Institute of Inspection, Cleaning and Restoration (IICRC) for carpet cleaning frequencies based on the amount of traffic and soil levels. It includes a chart that recommends vacuuming, spot cleaning, heavy-use area cleaning, and restorative cleaning frequencies for light, normal, heavy, and extreme soil levels. Additional sections provide tips for carpet care, spot removal steps, and specific stain removal instructions for 27 common spots and spills. The document aims to help homeowners properly maintain their carpets to extend their useful lifetime.
This document provides instructions for creating molds and casting duplicates of objects. It discusses:
- Casting involves creating identical copies of a master object through mold-making and pouring casting material.
- Common mold materials include silicone, plaster, resin, latex, with silicone being best for detail and longevity.
- Molds must be designed to allow duplicates to be removed without getting stuck on undercuts. This may require two-part molds or repositioning the master.
- A step-by-step process is described for making a two-part silicone mold for a resin piece, including adding keys to ensure proper alignment of the mold parts.
Este documento apresenta o Estatuto dos Servidores Públicos Municipais de Bauru, São Paulo. O estatuto define termos como cargo público, carreira e quadro e estabelece regras para provimento de cargos por nomeação, transferência, reintegração, reversão e outras formas. Também trata de concursos públicos, substituições, licenças, promoções, aposentadoria e outras questões relativas aos direitos e deveres dos servidores públicos municipais.
Este documento discute a importância dos profissionais cenotécnicos no teatro brasileiro, destacando a necessidade de valorização e reconhecimento desta classe. Refere-se ao I Encontro Nacional de Profissionais Arquitetos Cênicos, Cenógrafos e Cenotécnicos em 1987, que sistematizou a nomenclatura da área e despertou consciência sobre a contribuição dos cenotécnicos. Também aborda as funções da cenotécnica no teatro e a escassez de literatura e formação técnica
Ninguém Escreve ao Coronel (El coronel no tiene quien le escriba) foi um dos primeiros contos a serem escritos por Gabriel García Márquez, publicado no final de 1961.
O Coronel foi um dos muitos oficiais da revolução, e por isso passa anos esperando a chegada de uma carta que iria anunciar a sua tão esperada pensão. Enquanto ele espera, a sua vida vai passando. A sua mulher tem uma doença respiratória e ambos vivem numa extrema pobreza. O seu filho morre e deixa como herança um galo de briga, que se torna a única esperança - além da tão esperada carta - de pagar suas dívidas e conseguir alimento para a família.
Em 1597, um pedido da rainha Elizabeth incumbiu Shakespeare (1564-1616) de escrever uma peça às pressas. O resultado, criado em quatorze dias, foi As alegres matronas de Windsor, esta comédia de costumes farsesca, protagonizada por Sir John Falstaff (personagem também da peça Henrique IV). Falstaff é considerado por muitos um dos melhores personagens de Shakespeare. É o caso de Harold Bloom, para quem Falstaff figura, juntamente com Hamlet, no centro do universo criativo shakesperiano. A ação de passa na cidade de Windsor, na Inglaterra. Falstaff, um cavalheiro falido que se encontra numa maré de azar, inventa um plano para enriquecer. Seduzirá não uma, mas duas senhoras ricas da região, a sra. Ford e a sra. Pajem, na tentativa de pôr as mãos no dinheiro do marido de cada uma delas. Mas aparentemente as matronas de Windsor são mais espertas que ele, que vai se ver em apuros. Irônica, cheia de reviravoltas e peripécias, a peça acompanha de um modo engraçado, mas também fraterno, os ciúmes, as suspeitas, adultérios e outras cômicas situações matrimoniais. Esta tradução de Millôr Fernandes conserva toda a hilariedade original da pena do bardo inglês.
Única comédia em prosa do Bardo, conta como Falstaff, metido a garanhão, quer seduzir duas senhoras e a partir daí, toda confusão se forma. Conta-se que esta pea teria sido escrita por encomenda da Rainha.
Um casamento marcado pelo conflito. De um lado amigos; do outro familiares. A troca de ironias e acusações ganha formas e expressões nesta peça em que o dramaturgo alemão Bertold Brecht retrata a decadência do pensamento burguês.
Neste documento, dois homens famintos, Chumbinho e Julião, tentam arranjar comida de diferentes maneiras sem sucesso. Julião ouve o dono Joaquim pedir para sua esposa Maria entregar um pastelão para alguém que faça um sinal específico. Julião sugere que Chumbinho vá até Maria fingindo ser o mensageiro de Joaquim para conseguir o pastelão.
Dois homens famintos, Chumbinho e Julião, elaboram um plano para enganar a esposa de um fazendeiro, Dona Maria, e conseguir o pastelão que ela havia preparado. Chumbinho finge ser o mensageiro enviado pelo marido dela para buscar o pastelão. A estratagema funciona e ele consegue o pastelão, para deleite dele e de Julião. Porém, o marido chega em casa mais cedo e descobre o engano.
O resumo é do primeiro ato da peça "Esperando Godot", de Samuel Beckett. Os personagens Vladimir e Estragon aguardam na beira de uma estrada a chegada de alguém chamado Godot, sem saber ao certo o dia ou motivo da espera. Eles discutem eventos passados e tentam matar o tempo, enquanto lidam com a incerteza e tédio de sua situação.
Tartufo (em francês Le Tartuffe) é uma comédia de Molière, e uma das mais famosas da língua francesa em todos os tempos. Sua primeira encenação data de 1664 e foi quase que imediatamente censurada pelos devotos religiosos que, no texto, foram retratados na personagem-título como hipócritas e dissimulados.
Os devotos sentiram-se ofendidos, e a peça quase foi proibida por esta razão, pelos tribunais do rei Luís XIV de França, onde tinham grande influência.
Na língua portuguesa, o termo tartufo, como em outro idiomas, passou a ter a acepção de pessoa hipócrita ou falso religioso, originando ainda uma série de derivados como tartufice, tartúfico ou ainda o verbo tartuficar - significando enganar, ludibriar com atos de tartufice.
1. O homem conversa com um garoto que aparece frequentemente em sua casa sem avisar e lê seus livros.
2. O garoto fala sobre seu pai ausente e sobre a relação distante que tem com ele.
3. O homem revela que passou alguns anos em um seminário quando era adolescente.
1) O documento é uma peça teatral de Luigi Pirandello chamada "O Homem da Flor na Boca".
2) A peça se passa em uma rua à noite, onde um homem estranho conversa com um pacato viajante que perdeu o trem.
3) O homem estranho gosta de observar as vidas dos outros e imaginar detalhes sobre eles, para se agarrar à vida de uma forma.
O documento é uma peça teatral de Luigi Pirandello chamada "O Homem da Flor na Boca". A peça apresenta um diálogo noturno entre o Homem da Flor na Boca e um Pacífico Freguês que perdeu o último trem. O Homem da Flor na Boca reflete sobre a vida e a morte de forma sombria e angustiada, enquanto observa a vida dos outros.
1) O documento apresenta o prólogo e as ideias do autor para seu drama Leonor de Mendonça. Ele explora a temática da fatalidade e como as circunstâncias podem levar um homem a cometer um crime.
2) O autor desenhou personagens como a duquesa Leonor de Mendonça, o duque D. Jaime, e a família Alcoforado para explorar os temas da sujeição feminina e como os defeitos dos personagens os levam a se oporem.
3) O autor pretende usar a interação dos personagens para cri
NIOUKHINE dá uma conferência sobre os malefícios do tabaco a pedido de sua esposa, apesar de ser ele próprio um fumador inveterado. Ele desvia-se do tema falando sobre sua vida doméstica difícil com sua esposa controladora e sete filhas. Ele revela seu desejo de fugir dessa vida medíocre e se lembrar dos dias em que era jovem e livre.
Um velho ator cômico que, embriagado, havia adormecido na coxia, desperta e quando retorna ao palco, percebe que o espetáculo já findou e o público já se foi. A partir disso, repensa toda sua vida.
As irmãs se preparam para ir a um show da cantora Ivete Sangalo, mas passam por uma série de contratempos e discussões que quase fazem com que desistam de ir. Elas precisam se arrumar, escrever um bilhete para a afilhada e lidar com o atraso, quase perdendo o início do show.
Três irmãs recebem ingressos para um show da cantora Ivete Sangalo. Após uma longa discussão sobre se irão ou não, elas passam por uma série de contratempos que colocam em dúvida se chegarão a tempo para o show, como não acharem os ingressos e se atrasarem na preparação.
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...Diana Rendina
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.
How to Fix the Import Error in the Odoo 17Celine George
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
1. 54 HORRORSHOW HORRORSHOW 55
HOW TOMake your own face into a
latex monster mask!
By Arnold Goldman of The Monster Makers
I am sure you have all heard it said before—“Boy,
would your face make a great Halloween mask!”or,“That
mask is almost as scary as my (brother, uncle, sister, fa-
ther, etc.)!” Anyone who has ever made, seen, or owned
a scary Halloween mask has heard that corny line many
times, and I thought it would be fun to do a demo that
would finally put some real meaning into those annoy-
ing and predictable remarks. So, come along as I show
you a simple process for turning your own face into a
gruesome latex Halloween mask!
STEP 1. Meet our unfortunate victim and fellow Monster
Makers crew member, Ronnie K. Ron has kindly agreed
to let us replicate and then destroy his cool exterior.
He understands that it is for a good cause. So no hard
feelings.
STEP 2. The first task in turning Ron’s face into a mask
is to take a lifecast. We’ve prepped all of our materials:
Prosthetic Grade Cream Alginate, plaster bandages, latex
gloves, water, and a couple of buckets.We start by mixing
the alginate with water.
STEP 3. It’s a messy job but someone has be the victim.
If you’re especially claustrophobic you might not be the
best candidate for a mask, but Ron has been through all
of this before and gladly agrees to receive the first glob of
gooey alginate. Yuck!
STEP 4. The alginate goes on quickly. When applying al-
ginate, press it firmly against the skin so you do not trap
air. This is especially important around the eyes, corners
of the mouth, and behind the edges of the nostrils. We
are just doing the face, so no bald cap is necessary. You
of course DO NOT want to cover the nostrils. Be sure
to work carefully around that area. If the nostrils do get
covered just have your subject exhale sharply though
them to open up the airway. No need to panic should it
happen. Just discuss it with your subject in advance.
1. 2. 3. 4. 5. 6. 7. 8. 9.
2. 56 HORRORSHOW HORRORSHOW 57
STEP 5. Just before the alginate begins to set, we should
press some cotton fiber into the alginate. This will
allow the plaster bandages to adhere to the alginate by
forming a mechanical bond between the alginate and the
bandages.
STEP 6. After the alginate sets we begin to apply the
plaster bandages. It is also important to work the ban-
dages against the alginate to make sure that they make
complete contact with the alginate so there are no air
pockets.
STEP 7. The bandages are applied over all exposed alg-
inate, leaving the nose for last. Beforehand it is impor-
tant to prepare various size small strips that you can use
to cover the nose area.
STEP 8. Once the plaster bandages have set, have the
subject lean forward and help remove the mold. We ap-
plied a little Vaseline along the eyebrows and hairline be-
forehand so the mold comes free easily.
STEP 9. Here is our subject, happy to be free from the
mold. Most people describe it as a very relaxing expe-
rience. This mold looks like it will work great for our
purpose.
STEP 10. Because latex masks are made from plaster
molds, we will need to first cast the face in a material
that is malleable. We also want to make some gruesome
changes so we will need to create a copy of the face in
clay. For that we will melt down some oil-based clay and
pour it into the mold.
As you melt it you will want to make sure it is suf-
ficiently hot to pour. Our clay melts to a pourable con-
sistency at around 200-degrees F. Some of the Chavant
clays melt very well, too. Be very careful, though, when
melting clay—it can get dangerously hot and cause se-
vere burns. Never exceed 220-degrees F.
STEP 11. After about 10 minutes the clay will build up
sufficiently in the mold and we pour out the excess. We
have deposited about a half-inch thickness in the mold
that will work fine.
STEP 12. After the clay is completely cool (you can re-
frigerate the mold or submerge it in cold water), we can
begin to demold.
STEP 13. The clay comes out very easily. No mold re-
lease is necessary. Keep in mind that the mold is usually
destroyed in the process so you cannot reuse it.
STEP 14. Here is the finished clay copy. Any imperfec-
tions can be easily removed. In the case of making a
monster mask we can’t really have enough defects, so we
will be adding a generous amount of exciting new flaws!
Muuaahhaahaha!
STEP 15. Here is the clay all cleaned up and ready for
damage.
STEP 16. Now we can get busy on making changes for
the mask. I have decided that we will give Ron a disease.
Let’s see—leprosy? necrotizing fasciitis?—there are so
many to choose from. Why don’t we just make this up as
we go along, then? I like Ron, but he did spill a drum of
latex once. This will be fun!
STEP 17. It doesn’t take long for things to go horribly
wrong with Ron’s complection. Yikes! But now we need
to remove his clay eye and put in a fake eye. We will leave
one diseased and one unaffected.
STEP 18. Once the fake eye is positioned and the eyelids
sculpted we can begin to ready the pattern for the mold.
Here I am filling the gaps around the bottom of the oil
clay as it meets the tabletop, using water-based clay.
STEP 19. Here you can see a closeup of one of the gaps.
If we didn’t fill this, the plaster would seep underneath
and make a very unsightly and unworkable mold.
STEP 20. In this image I have everything ready to go. All
we need is some hydrocal, a brush, and a bucket of room
temperature water.
STEP 21. Carefully sift the plaster into the water until
it comes up a few inches above the top and doesn’t sink
back down. Mix until it is creamy and has no lumps.
STEP 22. Once the plaster is uniform, apply with a brush
to capture all of the detail.A few sharp breaths of air over
10. 11. 12. 13. 14. 15.
16. 17. 18. 19. 20.
21. 22. 23. 24. 25. 26.
3. 58 HORRORSHOW HORRORSHOW 59
Ultra-Realistic Silicone Skin
PlatSil®
Gel-10 & Deadener make skins so
real, they’ll take your breath away!
PlatSil Gel-10 offers:
• Unmatched versatility-any skin hardness
• Translucency for any coloration or effect
• Self-sticking if needed, adheres to skin, reuseable
• Easy 1:1 mix, rapid cure
• Pour, brush or spray application
800-858-5990 • www.polytek.com
Polytek®
manufactures liquid rubbers & plastics and is a
single source for all your mold making & casting needs.
Call Polytek for Low-Cost Trial Kits!
No other
FAKE skin
looks, acts
or feels as
REAL!
Mystique from X-Men by FXSmith
the surface will release all the bubbles and better capture
the detail.
STEP 23. Here is a shot of the finished detail coat.
STEP 24. Once the plaster thickens sufficiently you can
glob it on and build it up fast. Just make sure there are no
thin spots. We want at least one inch all the way around,
preferably two-inches thick.
STEP 25. As the plaster sets you can shape a flattish top
that allows you to rest the mold on its back while you
pour in the latex.
STEP 26. Once the plaster is set we can carefully remove
the clay sculpt. Be sure the plaster mold gets hot before
you remove the clay.
STEP 27. Here is the finished mold with the clay re-
moved. We have a little clean up left but nothing signifi-
cant.
STEP 28. To make sure we capture all the detail we will
apply the latex with a brush.You do not have to wait long
to do this, and in fact the mold is still warm when I be-
gin.
STEP 29. Make sure you gently scrub the latex into the
mold to get all the nasty detail.You can than pour the re-
maining latex into the mold. Let it sit for about 10 min-
utes to build up a sufficient thickness.
STEP 30. After the time is up, drain the excess latex
back into the container. We used about six ounces for
this casting. Turn the mold over and leave it in front side
down to drain the excess latex. Five minutes should do.
You can then place the mold open side up in front of a
fan overnight to dry.
STEP 31. Once the latex is dry you can carefully peel it
from the mold. The latex will still contain some moisture
so it is a good idea to powder it with cornstarch to keep it
from sticking to itself and creating a crease.
STEP 32. Since I’m only doing a face mask I’ve attached
an elastic band to hold the mask in place on one of our
head forms. This will allow me to work hands-free while
I paint.
STEP 33. I start with a jaundiced-looking flesh tone us-
ing mask paint. As with the previous demos, I am using
a Paasche H to apply the base color. Since it is all set up I
will stick with it for the entire demo and use a new tech-
nique that I learned for some of the detailing.
STEP 34. For the diseased areas I spray a brownish color
to act as a background for layering. I turn down the spray
to about 50 PSI. For the base color I usually set it a bit
higher at up to 80 PSI. It is hard on the hose but mask
paint sometimes needs the extra push since it is a thicker
medium than acrylics and inks.
STEP 35. Over the brown I use a sponge to stipple a
lightened version of the base color. This is lightly applied
to the high areas of the diseased spots to create a second-
ary background to accentuate the additional colors that
will be overlaid.
STEP 36. Next I start to add some bits of color to break
up the skin tone. These little flecks of color are splashed
on using a chip brush, which is cut in half with your
finger running through the brush near the mask. Mask
maker extraordinaire Jordu Schell demonstrated this
very effective technique at our June seminar. All kinds of
subtle color variations can be easily added this way.
STEP 37. I then go back to the diseased area and begin to
stipple additional colors over the highlighted base.Green,
red, and yellow are all added to the boils and affected ar-
eas. I am starting to really like my Ronnie mask, now! As
I think back to all of that valuable latex he poured down
the drain, I start to ratchet it up a notch. More puss!
STEP 38. To make the diseased areas stand out I add
some darker colors to the low points of the wounds. I
also spray some red around the bad spots.
STEP 39. Next I get busy on the good eye. The iris is
carefully painted. First a dark blue for the background
color and then lighter for the iris detail. This time I use a
small brush to do the iris detailing.
STEP 40. I decide to add quite a bit more red around
the face to adjust the flesh tone. I’ve concentrated the red
around the edges of the diseased areas as well. This pulls
all the colors together and creates a nice finished look.
STEP 41. For the last touches I add five-minute epoxy to
gloss the eyes and Perma-Wet over the diseased spots.
At last, here is the finished piece—Ronnie will never
be the same! He is actually a great guy and we love to
have him around the shop. Let’s give a big round of ap-
plause to Ronnie and P.J. for assisting me with this really
fun demo.
For more details on the making of this mask, be sure to
log on to www.monstermakers.com.
27. 28. 29. 30. 31. 32.
33. 34. 35. 36. 37.
38. 39. 40. 41.