5 steps process - How to clean and seal block paving on driveways and patios
Crystaltek Green Products
1. Vinyl-Off
Adhesive-Off
Ghost-Off
brought to you by
SYTECH
Leading supplier of signage and graphics solutions
2. VINYL - OFF
LIQUID ADHESIVE VINYL REMOVER!
Save up to 90% of your time and labour costs
Would you like to strip vinyl What does this mean for you?
and adhesive safely and easily It means you'll get the job
from almost any surface in done faster. You can do twice
5 to 15 minutes? This new the work in less than half the
revolutionary spray-on time. Add some heat to make
liquid vinyl remover, it go even faster!
Vinyl-Off , is the answer. It's possible to take up to 90%
This product is less time than ever before! So
environmentally friendly you can save up to 90% on
and completely safe. It your labour costs!
won't damage paint on
factory vehicle What's more - it
paint finishes or doesn't take a lot to do
any other painted a big job. Strip up to
s u r f a c e s . 750 square metres
(However you with one litre!
have to test first.) A gallon lets you
Just spray on and remove up to 3000
peel off! square metres!
The adhesive
comes off, too! It It's so safe you could
takes all the bathe in it, but why
struggle out of waste it for that?
removing vinyl Purchase this amazing
graphics. product now to make
your life easier, and
In the past, once increase your
you had the vinyl company’s productivity.
off, you still had to
remove the Need more info? We're
adhesive. With as close as your email or
Vinyl-Off, you telephone. We’d love to
simply spray it or help you. Our heart is
wipe it on (distribute with your business. For one
evenly), and wait a few stop service, we'll answer all
minutes. The Vinyl-Off your questions, and you can
penetrates the vinyl to place your order over the
deactivate the adhesive, so it phone at the same time.
all comes off in one step!
Within 5 to 15 minutes you can CALL US NOW.
pull off even years old
graphics - no scraping!
3. How To Use Vinyl-Off
LIQUID ADHESIVE VINYL REMOVER
Step by Step
1. Wipe Vinyl- onto ONLY the vinyl you want to
Off
remove.
- A little goes a long way. “Less is More”
- Test. Some planning can save you a lot of effort!
- We also recommend starting with a small area and
thereby determining the best method of dwell time,
amount of heat, and angle of pull.
2. Allow at least 1 minute of dwell time.
Don’t be surprised when you see no visible evidence.
Vinyl-Off penetrates the vinyl and attacks the
adhesive behind it. You won’t see a visible change in
the vinyl.
- Dwell time will vary based on vinyl thickness and
age. Thin, unlaminated vinyl - pull immediately.
3. For best results, warm surface (80°F+) immediately
before removal. Warm to the touch.
Sun warmed on a warm day is perfect!
Non-Flammable and no toxic fumes! So you can use
a heat gun or propane to warm the surface even
indoors!
4. Lift an edge and pull. The vinyl will come off in larger
pieces because it has been rejuvenated. Most of the
adhesive should come off with the vinyl. If it leaves
the adhesive behind, Vinyl- is being too
Off
aggressive! Use less heat or shorten the dwell time if
this occurs.
5. Remove any remaining adhesive by applying
Adhesive –Off.
4. ADHESIVE - OFF
LIQUID VINYL GLUE REMOVER!
Get your surfaces squeaky clean
ADHESIVE-OFF is designed to
quickly remove adhesive,
grease, tar, paint overspray
and printing inks from glass,
metal, glass, canvas,
chromadeck and fiberglass.
It even removes bug juice and
chewing gum!
It is a powerful blend of
biodegradable solvents and
surfactants designed to quickly
dissolve adhesives. It contains
no caustics, acids or known
carcinogens.
We do not recommended use on
fabrics or soaking in carpets
because it has over 90% active
ingredients.
It comes in the new VANILLA
SMASH scent, that is very
popular.
Spray it onto the adhesive,
watch the adhesive swell, then
wipe off with a paper towel,
scrape off, or even pressure
wash for big jobs.
It's a powerful solvent and it
smells great!
5. How To Use Adhesive-Off
LIQUID ADHESIVE REMOVER!
Step by Step
1. Thoroughly drench dry adhesive:
- Spraying preferred, but a product
soaked cloth works fine.
2. Allow about 1 minute dwell time. You wil
see the adhesive swell. May use a stiff
brush to agitate, especially around
rivets.
- Works best over 19 degrees Celsius.
- Product may dry off quickly if used in
hot- weather. Resoak as needed.
dry
3. Pressure wash, scrape, or wipe off.
- Depending on the size of the job,
different removal methods can be
used. For BIG jobs, a pressure washer
or power hose works well. For medium
jobs, scrape from bottom to top.
For small jobs, wipe off with a paper
towel or other clean cloth. A scrub
brush works great around rivets, etc.
4. Re- apply as needed.
Thick layers of adhesive may require
multiple applications for full removal.
5. Use caution! This product will dry skin.
- Use skin lotion to re-moisturize after
thoroughly washing any exposed skin.
6. Prepare surface in traditional manner for
new application.
- Ghost-Off is great if the surface is
oxidized
- ½ rubbing alcohol, ½ water works well
for prepping a regular surface
6. GHOST - OFF
LIQUID OXIDATION REMOVER!
MAKE THOSE GHOST IMAGES DISAPPEAR
With cut vinyl signs on especially vehicle surfaces,
you will find that after the vinyl has been
removed from the surface, oxidation has set in
and has left the shape of the cut vinyl sign on
your vehicle permanently.
PERMANENTLY? Well not exactly.
GHOST-OFF will quickly restore your weather-
exposed signage surfaces by removing
all surface oxidation. The product is a heavily
concentrated mix of new surfactants.
This makes using the product a simple 1-2-3
step process with the most amazing visual
results.
It fades “ghost” images of completely
removed vinyl so vehicles are no longer
haunted by the
past. It’s also a great surface prep.
GHOST-OFF easily gets rid of ghost sign
images from vehicle surfaces.
Simply spray onto a dry oxidized surface,
wait for one minute and then agitate with a
soft truck brush.
Follow that with a cool water rinse from top
to bottom and watch the white oxidation
rinse away!
Ghost images disappear before your
eyes.
7. How To Use Ghost-Off
LIQUID OXIDATION REMOVER!
Step by Step
1. Thoroughly drench dry surface.
Spraying preferred, pre-rinsing is optional.
2. Allow up to 1 minute dwell time.
Agitate with a soft brush, sponge, etc.
Product may dry quickly when used in
hot, dry weather.
3. Wash off.
Rinse thoroughly! Ghost- rinses free
Off
even in cold water. Watch for the
oxidation running off.
4. Re-apply if needed.
Not intended as a weekly wash!
Even heavily oxidized surfaces rarely
require a second round.
5. Use with caution! This product may dry
your skin. Use skin lotion to
remoisturize after thoroughly washing
any exposed skin.
6. May also be used as a surface prep
before applying graphics or re-painting.
8. SY
SYTECH Suppliers to the Signage and Graphics Industry
2 Livingstone Road, Pinetown, Durban, South Africa, 3610
Tel: 031701 4500 Fax: 031 701 4516
Email: info@sytechsupplies.com
http://www.sytechsupplies.com