The MSA ALTAIR Pro is a single-gas detector that provides reliable performance for detecting oxygen or toxic gases through user-replaceable sensors. It has a rugged, waterproof and dustproof design that allows for 2 years of maintenance-free operation. The device has simple one-button operation and provides alarms through flashing lights, audible sounds, and vibration to alert the user if hazardous gas levels are detected. It is suitable for accurately measuring various gases and offers adjustable alarm settings.

1. MSA ALTAIR Pro
Single-Gas Detector
The MSA ALTAIR Pro is a reliable high performance single gas detector with a wide
range of oxygen or toxic sensors to choose
from
Maintenance Free
There is no requirement for maintenance over its 2 year lifetime making
KEYBENEFITS
the ALTAIR an extremely economical instrument. This instrument will
• Superior dust and water protection
• Single button operation provides ease
of use
The extra thick rubberised housing provides protection from accidental
LEDs, audible alarm, and internal
drops and helps provide a tight seal, offering simple yet effective
vibrating alarm
for 24hours
sensor change or battery change is needed.
Rugged Design
• Alarms are indicated by flashing
• Great RFI performance
• Simple bump check with checkmark
continue to perform as long as battery capacity allows. No calibration,
resistance to water and dust ingress.
Plug-and-Play Sensor Operation
The superior triple alarm system fitted to the ALTAIR effectively alerts the
wearer to any danger. It consists of a distinctive audible alarm of 95 dB at
30 cm, super-bright LEDs visible from a 320o angle and a strong vibration
alarm.
CO
O2
H2S
NO2
PH3
HCN
NH3
ClO2
“
Simple intuitive operation, small
rugged design, and dependable
technology
“
GASESANALYSED

2. TECHNICALSPECIFICATION
GENERAL
• Accurately measures gas concentration or percent oxygen
• Replaceable battery and sensor
• Adjustable alarm set points are offered for LOW, HIGH,
TWA, and STEL
0-5.00 ppm
0-10% Vol
0-25% Vol
0-100%Vol
0-100%Vol
PHYSICAL
• Dimensions: 3.4” x 2.0” x 1.0”
• Weight: 4.0 oz including clip
• Case: Polycarbonate with rubberized shell
• IP67 Ingress Protection
GASES
• Oxygen
• Carbon monoxide
• Hydrogen sulphide
• Hydrogen cyanide
• Chlorine
• Chlorine dioxide
• Sulphur dioxide
• Nitrogen dioxide
• Ammonia
• Phosphine
• Carbon Dioxide
• Butane
• Methane
• Propane
0-25% by Vol
PERFORMANCE
0-1500 ppm
• Battery: CR2 lithium camera battery
• Run time: 9000 hour installed life - typical
0-200 ppm
0-30 ppm
0-20 ppm
CERTIFICATIONS
0-1.00 ppm
• Ex ia IIC T4
• Class I, Div. 1, Groups A, B, C and D; Class II,
0-20 ppm
0-20 ppm
Div. 1, Group G
0-100 ppm
ORDERINGINFORMATION
Part No.
Gas
Range
Part No.
Description
10070791
O2
19.5/23 Vol %
467895
Regulator, 0.25 lpm
10071364
O2
19.5/18 Vol %
10071364
Tubing, 16” (do not use with NH3,
Cl2, and CLO2)
10070750
CO
25/100ppm
10070750
10071334
CO
30/60ppm
Tubing, 16" Tygon-lined (NH3, Cl2,
and CLO2)
10071336
CO
35/400ppm
10071334
3V CR2 battery
10071361
H2S
5/10ppm
10071336
Clip, stainless steel
10070749
H2S
10/15ppm
10071363
H2S
7/14ppm
11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HT
T: +44(0)151 666 8300 F: +44(0)151 666 8329 E: sales@a1-cbiss.com
W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com
Cert No. 996
ISO 9001