This document provides operation, assembly, and parts information for Moyno brand progressing cavity pumps with frame sizes 1L4, 2L4, 3L4, 3M3, 6M3, 3P2, 6P2, and 9P2. It describes the pumping mechanism and identifies nameplate data, type designations based on materials of construction, and lists parts with corresponding part numbers. Disassembly and assembly instructions are also provided.
This document is a service manual that provides installation, operation, and maintenance procedures for Moyno 2000 pumps. It includes information on nameplate data, pump components, rotation direction, model numbers, materials, and disassembly and assembly of open throat and bridge breaker models. The manual contains sections on installation, operation, maintenance, storage, parts, and troubleshooting.
This document is a service manual that provides installation, operation, and maintenance instructions for Moyno 2000 pumps models G2 and G3. It outlines the key components of the pumps including the frame, type designation, version designation, and trim code. It also provides details on installation including piping, foundation, and shaft alignment. Sections cover operation, maintenance, troubleshooting, parts lists, and exploded views.
This document is a service manual that provides information on installation, operation, maintenance and troubleshooting for Moyno 2000 pumps with flanged suction ports. It includes sections on nameplate data, installation procedures, operation, maintenance, parts, troubleshooting, and variations of standard parts. The document outlines the pump components, materials, and model numbering system in detail to aid users in properly operating and servicing the Moyno 2000 pump.
Moyno l10 drive end operations and assemblyNelsonBort
This document provides assembly instructions and parts lists for Moyno brand progressing cavity pumps with frame sizes 1L10, 2L10, 3L10, 1L10H, 2L10H, 3M8, 3P6, 6P6, and 9P6. It describes the pump components and materials of construction, outlines the disassembly and reassembly procedures, and includes an exploded parts diagram with part numbers.
Moyno l6 drive end operations and assemblyNelsonBort
This document provides assembly instructions and parts lists for Moyno brand progressing cavity pumps with frame sizes 1L6, 2L6, 3L6, 3M4, 6M4, 3P3, 6P3, and 9P3. It describes the pumping action and components of the pump. Safety warnings and nameplate data are outlined. The document then provides an exploded parts list with part numbers for the various component materials and frame sizes. Detailed instructions are given for disassembly and assembly of the pump.
Moyno l8 drive end operations and assemblyNelsonBort
This document provides assembly instructions and parts lists for Moyno brand progressing cavity pumps with frame sizes 1L8, 2L8, 3L8, 3M6, 3P4, 6P4, and 9P4. It describes the pump components, identifies them using part numbers and type designations, and provides a disassembly and assembly procedure. Key details include an overview of the pumping mechanism, explanations of frame size and type designations, a table listing all pump parts and corresponding part numbers, and step-by-step instructions for disassembling and reassembling the pump.
Moyno l2 drive end operations and assemblyNelsonBort
This document provides instructions for disassembling and assembling Moyno brand progressing cavity pumps. It includes:
- An overview of Moyno pump components and operating principles, including the rotor-stator mechanism that creates pulsation-less flow.
- Details on identifying pump models using frame size, type designation, and nameplate data.
- An exploded parts list and part numbers for common pump components, organized by material of construction.
- A step-by-step procedure for disassembling pump components like the stator, rotor, drive shaft, bearings, and seals.
Yale c879 glc60 vx lift truck service repair manualfjjskdmnenemm
The document provides instructions for removing and installing the hood, seat, dash, and side covers on a lift truck. Key steps include removing the floor plate, side panels, fenders, steering column covers, dash, and kick panel. The gas springs and hinge screws are then removed to lift the hood off the frame. Reinstallation involves reversing these steps, making sure the hood latch striker aligns properly and the gas springs are installed in the correct holes based on the seat type.
This document is a service manual that provides installation, operation, and maintenance procedures for Moyno 2000 pumps. It includes information on nameplate data, pump components, rotation direction, model numbers, materials, and disassembly and assembly of open throat and bridge breaker models. The manual contains sections on installation, operation, maintenance, storage, parts, and troubleshooting.
This document is a service manual that provides installation, operation, and maintenance instructions for Moyno 2000 pumps models G2 and G3. It outlines the key components of the pumps including the frame, type designation, version designation, and trim code. It also provides details on installation including piping, foundation, and shaft alignment. Sections cover operation, maintenance, troubleshooting, parts lists, and exploded views.
This document is a service manual that provides information on installation, operation, maintenance and troubleshooting for Moyno 2000 pumps with flanged suction ports. It includes sections on nameplate data, installation procedures, operation, maintenance, parts, troubleshooting, and variations of standard parts. The document outlines the pump components, materials, and model numbering system in detail to aid users in properly operating and servicing the Moyno 2000 pump.
Moyno l10 drive end operations and assemblyNelsonBort
This document provides assembly instructions and parts lists for Moyno brand progressing cavity pumps with frame sizes 1L10, 2L10, 3L10, 1L10H, 2L10H, 3M8, 3P6, 6P6, and 9P6. It describes the pump components and materials of construction, outlines the disassembly and reassembly procedures, and includes an exploded parts diagram with part numbers.
Moyno l6 drive end operations and assemblyNelsonBort
This document provides assembly instructions and parts lists for Moyno brand progressing cavity pumps with frame sizes 1L6, 2L6, 3L6, 3M4, 6M4, 3P3, 6P3, and 9P3. It describes the pumping action and components of the pump. Safety warnings and nameplate data are outlined. The document then provides an exploded parts list with part numbers for the various component materials and frame sizes. Detailed instructions are given for disassembly and assembly of the pump.
Moyno l8 drive end operations and assemblyNelsonBort
This document provides assembly instructions and parts lists for Moyno brand progressing cavity pumps with frame sizes 1L8, 2L8, 3L8, 3M6, 3P4, 6P4, and 9P4. It describes the pump components, identifies them using part numbers and type designations, and provides a disassembly and assembly procedure. Key details include an overview of the pumping mechanism, explanations of frame size and type designations, a table listing all pump parts and corresponding part numbers, and step-by-step instructions for disassembling and reassembling the pump.
Moyno l2 drive end operations and assemblyNelsonBort
This document provides instructions for disassembling and assembling Moyno brand progressing cavity pumps. It includes:
- An overview of Moyno pump components and operating principles, including the rotor-stator mechanism that creates pulsation-less flow.
- Details on identifying pump models using frame size, type designation, and nameplate data.
- An exploded parts list and part numbers for common pump components, organized by material of construction.
- A step-by-step procedure for disassembling pump components like the stator, rotor, drive shaft, bearings, and seals.
Yale c879 glc60 vx lift truck service repair manualfjjskdmnenemm
The document provides instructions for removing and installing the hood, seat, dash, and side covers on a lift truck. Key steps include removing the floor plate, side panels, fenders, steering column covers, dash, and kick panel. The gas springs and hinge screws are then removed to lift the hood off the frame. Reinstallation involves reversing these steps, making sure the hood latch striker aligns properly and the gas springs are installed in the correct holes based on the seat type.
Kubota b5200 tractor service repair manualfjjskdmnenemm
This workshop manual provides information on servicing and repairing tractors models B5200, B6200, B7200, B6200HST, and B7200HST. The manual covers features of the engine including the cylinder block, cylinder head, crankshaft, pistons, connecting rods, camshaft, fuel camshaft, rocker arm assembly, intake and exhaust valves, flywheel, air cleaner, and muffler. It also describes the lubrication system components like the relief valve, by-pass valve, oil switch, and oil pump as well as the cooling system, fuel system, and engine oil flow.
The document provides specifications for various engine components of a D4DD engine including:
- Cylinder dimensions, compression ratio, firing order, output and torque specifications.
- Valve timing and dimensions, clearances, springs.
- Cylinder block, head and sleeve dimensions and clearances.
- Piston, ring, pin and connecting rod dimensions and clearances.
- Camshaft, crankshaft, bearing and gear dimensions and clearances.
This workshop manual provides information on servicing tractors models B5200, B6200, B7200, B6200HST, and B7200HST. The manual covers features of the engine including the cylinder block, cylinder head, crankshaft, pistons, connecting rods, camshaft, fuel camshaft, rocker arm assembly, valves, flywheel, air cleaner, and muffler. It also describes the lubrication system components like the relief valve, by-pass valve, oil switch, and oil pump, as well as the cooling system components of the water pump, thermostat, radiator, and radiator cap. The fuel system section covers the fuel filter, fuel pump,
This workshop manual provides information on servicing and repairing Kubota tractors models B5200, B6200, B7200, B6200HST, and B7200HST. The manual covers the engine, lubrication system, cooling system, and fuel system. The engine section describes components like the cylinder block, cylinder head, crankshaft, pistons, connecting rods, camshaft, valves, flywheel, air cleaner, and muffler. The lubrication system section covers the relief valve, by-pass valve, and oil switch. The cooling system section discusses the water pump, thermostat, radiator, and radiator cap. The fuel system section lists the fuel filter, fuel pump
This document is a catalog of bearing applications for Audi vehicles from 1972-2009. It provides specifications for main, connecting rod, and crankshaft bearings including bore size, stroke, bearing width, oil clearance, and installation torque for various Audi engines ranging from 1.5L to 2.0L. Dimensions and part numbers are given for specific bearing locations on each engine.
Case ih case international 1896 tractor service repair manualfujskekfmsme
This document provides a shop manual for Case/International tractor models 1896-2096. It begins with sections on identification numbers and an index of contents. The index lists components by system - like axles, brakes, engine, etc. Each system section provides removal, overhaul and installation instructions for components. Specifications are also provided in both US customary and metric units.
1. The document provides torque specifications for engine components on Detroit Diesel engines, including the air compressor drive gear nut which is specified as 210-250 N·m (155-185 lb·ft).
2. Instructions are given for installing the air compressor, including torquing the drive gear nut to 210-250 N·m and installing coolant and air lines.
3. Precautions are listed to ensure proper installation of the air compressor bolts, coolant lines, and retaining components.
The document provides instructions for building a miniature RC turbine engine from scratch. It describes the major components including the compressor, diffuser, combustion chamber, nozzle guide vanes, and turbine wheel.
The combustion chamber requires forming stainless steel cylinders and rolling them to size before spot welding the seams. Fuel injection sticks are secured in the chamber and fuel is delivered via hypodermic needles.
Detailed instructions are given for machining the shaft from 4140 steel and installing ceramic ball bearings. Lubrication is provided via a mixture of jet oil and kerosene delivered through the fuel system.
Overall the document outlines the process for manufacturing each custom part to exacting tolerances and assembling them into a
This document provides information on identifying and servicing engines in 1988 Jeep Cherokee vehicles. It describes how to identify the 4.0L and 4.2L 6-cylinder engines based on the vehicle identification number code. It also provides procedures for removing and installing components like the intake and exhaust manifolds, cylinder head, rocker arms, valves, and engine front cover. Special codes stamped on engines indicate if they have oversized or undersized components.
This document provides specifications and dimensions for "NEF" diesel engines, including 3 and 4 cylinder models. It describes the engine systems such as lubrication, cooling, turbocharging, and dimensions of components. The lubrication system uses a lobe oil pump to circulate oil through the crankshaft, camshaft, cylinder head and oil cooler. The cooling system has a radiator, visco-static fan, water pump, thermostat and oil cooler. Turbocharged models include an air filter and exhaust-driven turbocharger. Detailed dimensions are provided for build clearances, engine block components, cylinder head and valves. Torque specifications are also listed.
Kubota l175 tractor service repair manualjjfjsekksemm
This shop manual provides service and repair information for Kubota L175, L210, L225, L225DT, and L260 tractor models. It includes an index listing components by section and model, with specifications on tune-up procedures, engine details, fluid capacities and clearances. The condensed service data section provides general specifications on engines, batteries, idle speeds and hydraulic system details for each model.
This shop manual provides service and repair information for Kubota L175, L210, L225, L225DT, and L260 tractor models. The manual includes an index listing components by model and section. Sections cover systems like brakes, clutch, engine, transmission, differential, hydraulics, and electrical. Specification tables provide details on tune-up procedures, fluid capacities, component clearances and sizes for each model.
These cylinders provide virtually frictionless conversion of pneumatic pressure to linear force. The fact that there is no stiction or blow-by of any kind ensures accuracy, repeatability and sensitivity unheard of from conventional sliding seal air cylinders.
Website: www.AlphaFlo.com
AlphaFlo® design,manufacturer and offer the most reliable slurry pumps and Weir Warman pump replacement parts commiting to serve the global mining,mineral processing and industrials.
Horizontal heavy duty slurry pump
Vertical cantilever sump pump
Unlined metal gravel and sand pump
Replaceable metal and rubber lined pump
Versatile slurry pump spare parts
2004 polaris 700 xc sp edge snowmobile service repair manualfjskemdzaqmme
The document provides specifications for the Polaris 500 XC SP snowmobile, including engine details, carburetor settings, clutch components, dimensions, and suspension information. It lists the model number, engine displacement of 500cc, and carburetor as a 38mm Mikuni TM with jetting specifications. Drive clutch components include shift weights of 10-56 and spring colors of black/green. The rear suspension is the EDGE type and front is EDGE IFS with specified shock part numbers. Overall vehicle length is listed as 113 inches.
2004 polaris 800 xc sp edge snowmobile service repair manualfjjfyjsekdmme
The document provides specifications for the Polaris 500 XC SP snowmobile, including engine details, carburetor settings, clutch components, dimensions, and suspension information. It lists the model number, engine displacement, cylinder count, piston details, operating RPM range, and other engine specs. Drive system specs such as shift weights, springs, chaincase gearing are also included. Dimensions, capacities, and suspension details are presented. The specifications cover various ambient temperature and altitude ranges.
Hyundai R145CR-9 Crawler Excavator Service Repair Manual.pdfdjfksekmdmdm
The document provides instructions for removing and installing a hydraulic pump. It describes:
1) Lowering work equipment, releasing pressure from lines before removal, draining oil from the tank.
2) Disconnecting hoses and pipes, removing mounting bolts, and pulling the pump assembly out of the housing.
3) Reinstallation is done in reverse order, adding new oil and bleeding air from the system before testing.
1. The wet parts of the FSB series centrifugal pump are made of fluoroplastic alloy.
2. Compact structure, easily operating, and economical.
3. The pump casings, impellers, and mechanical seals of FSB/FSB (D) are interchangeable.
4. Impeller, mechanical seal and shaft are integrity, the torque transferred by morse taper shaft, and the shaft sealed by WB2 mechanical seal.
5. Main wet parts can be made by several material like: fluoroplastic , fluoroplastic alloy and PDFE etc.
6. Bracket structure, mating different power motors according to Medium gravity .
7. Grease – lubricated bearing,the bearing box needed to filled in engine oil .
Contact Us
Anhui Wolong Pump & Valve Co., Ltd Shanghai Branch
Add :Room A145, Lane 505, Changqing Road, Pudong New Dist., Shanghai, China
Email :sales@wolongpump-sh.com
Tel :0086 21 6841 5960
Fax :+86 21 6841 6330
Web :www.wolongpump-sh.com
2005 polaris 600 xc sp snowmobile service repair manualfjskemdzaqmme
- This document is the 2005 performance service manual for Polaris snowmobiles including the 500 XC SP, 600 XC SP, 700 XC SP, 800 XC SP, and 900 FUSION models. It provides specifications, maintenance procedures, diagrams and other technical information for certified technicians. The manual covers engine, clutch, suspension, electrical and other systems.
2005 polaris 500 xc sp m 10 snowmobile service repair manualolfjsekdmmes
- This document is the 2005 performance service manual for Polaris snowmobiles including the 500 XC SP, 600 XC SP, 700 XC SP, 800 XC SP, and 900 FUSION models. It provides specifications, maintenance procedures, diagrams and other technical information for certified technicians. The manual covers engine, clutch, suspension, electrical and other systems.
2005 polaris 700 xc sp m 10 snowmobile service repair manualfjjfyjsekdmme
- This document is the 2005 performance service manual for Polaris snowmobiles including the 500 XC SP, 600 XC SP, 700 XC SP, 800 XC SP, and 900 FUSION models. It provides specifications, maintenance procedures, diagrams and other technical information for certified technicians. The manual covers engine, clutch, suspension, electrical and other systems.
2005 polaris 700 xc sp edge snowmobile service repair manualfjjsekwsxkdmmem
- This document is the 2005 performance service manual for Polaris snowmobiles including the 500 XC SP, 600 XC SP, 700 XC SP, 800 XC SP, and 900 FUSION models. It provides specifications, maintenance procedures, diagrams and other technical information for certified technicians. The manual covers engine, clutch, suspension, electrical and other systems.
Kubota b5200 tractor service repair manualfjjskdmnenemm
This workshop manual provides information on servicing and repairing tractors models B5200, B6200, B7200, B6200HST, and B7200HST. The manual covers features of the engine including the cylinder block, cylinder head, crankshaft, pistons, connecting rods, camshaft, fuel camshaft, rocker arm assembly, intake and exhaust valves, flywheel, air cleaner, and muffler. It also describes the lubrication system components like the relief valve, by-pass valve, oil switch, and oil pump as well as the cooling system, fuel system, and engine oil flow.
The document provides specifications for various engine components of a D4DD engine including:
- Cylinder dimensions, compression ratio, firing order, output and torque specifications.
- Valve timing and dimensions, clearances, springs.
- Cylinder block, head and sleeve dimensions and clearances.
- Piston, ring, pin and connecting rod dimensions and clearances.
- Camshaft, crankshaft, bearing and gear dimensions and clearances.
This workshop manual provides information on servicing tractors models B5200, B6200, B7200, B6200HST, and B7200HST. The manual covers features of the engine including the cylinder block, cylinder head, crankshaft, pistons, connecting rods, camshaft, fuel camshaft, rocker arm assembly, valves, flywheel, air cleaner, and muffler. It also describes the lubrication system components like the relief valve, by-pass valve, oil switch, and oil pump, as well as the cooling system components of the water pump, thermostat, radiator, and radiator cap. The fuel system section covers the fuel filter, fuel pump,
This workshop manual provides information on servicing and repairing Kubota tractors models B5200, B6200, B7200, B6200HST, and B7200HST. The manual covers the engine, lubrication system, cooling system, and fuel system. The engine section describes components like the cylinder block, cylinder head, crankshaft, pistons, connecting rods, camshaft, valves, flywheel, air cleaner, and muffler. The lubrication system section covers the relief valve, by-pass valve, and oil switch. The cooling system section discusses the water pump, thermostat, radiator, and radiator cap. The fuel system section lists the fuel filter, fuel pump
This document is a catalog of bearing applications for Audi vehicles from 1972-2009. It provides specifications for main, connecting rod, and crankshaft bearings including bore size, stroke, bearing width, oil clearance, and installation torque for various Audi engines ranging from 1.5L to 2.0L. Dimensions and part numbers are given for specific bearing locations on each engine.
Case ih case international 1896 tractor service repair manualfujskekfmsme
This document provides a shop manual for Case/International tractor models 1896-2096. It begins with sections on identification numbers and an index of contents. The index lists components by system - like axles, brakes, engine, etc. Each system section provides removal, overhaul and installation instructions for components. Specifications are also provided in both US customary and metric units.
1. The document provides torque specifications for engine components on Detroit Diesel engines, including the air compressor drive gear nut which is specified as 210-250 N·m (155-185 lb·ft).
2. Instructions are given for installing the air compressor, including torquing the drive gear nut to 210-250 N·m and installing coolant and air lines.
3. Precautions are listed to ensure proper installation of the air compressor bolts, coolant lines, and retaining components.
The document provides instructions for building a miniature RC turbine engine from scratch. It describes the major components including the compressor, diffuser, combustion chamber, nozzle guide vanes, and turbine wheel.
The combustion chamber requires forming stainless steel cylinders and rolling them to size before spot welding the seams. Fuel injection sticks are secured in the chamber and fuel is delivered via hypodermic needles.
Detailed instructions are given for machining the shaft from 4140 steel and installing ceramic ball bearings. Lubrication is provided via a mixture of jet oil and kerosene delivered through the fuel system.
Overall the document outlines the process for manufacturing each custom part to exacting tolerances and assembling them into a
This document provides information on identifying and servicing engines in 1988 Jeep Cherokee vehicles. It describes how to identify the 4.0L and 4.2L 6-cylinder engines based on the vehicle identification number code. It also provides procedures for removing and installing components like the intake and exhaust manifolds, cylinder head, rocker arms, valves, and engine front cover. Special codes stamped on engines indicate if they have oversized or undersized components.
This document provides specifications and dimensions for "NEF" diesel engines, including 3 and 4 cylinder models. It describes the engine systems such as lubrication, cooling, turbocharging, and dimensions of components. The lubrication system uses a lobe oil pump to circulate oil through the crankshaft, camshaft, cylinder head and oil cooler. The cooling system has a radiator, visco-static fan, water pump, thermostat and oil cooler. Turbocharged models include an air filter and exhaust-driven turbocharger. Detailed dimensions are provided for build clearances, engine block components, cylinder head and valves. Torque specifications are also listed.
Kubota l175 tractor service repair manualjjfjsekksemm
This shop manual provides service and repair information for Kubota L175, L210, L225, L225DT, and L260 tractor models. It includes an index listing components by section and model, with specifications on tune-up procedures, engine details, fluid capacities and clearances. The condensed service data section provides general specifications on engines, batteries, idle speeds and hydraulic system details for each model.
This shop manual provides service and repair information for Kubota L175, L210, L225, L225DT, and L260 tractor models. The manual includes an index listing components by model and section. Sections cover systems like brakes, clutch, engine, transmission, differential, hydraulics, and electrical. Specification tables provide details on tune-up procedures, fluid capacities, component clearances and sizes for each model.
These cylinders provide virtually frictionless conversion of pneumatic pressure to linear force. The fact that there is no stiction or blow-by of any kind ensures accuracy, repeatability and sensitivity unheard of from conventional sliding seal air cylinders.
Website: www.AlphaFlo.com
AlphaFlo® design,manufacturer and offer the most reliable slurry pumps and Weir Warman pump replacement parts commiting to serve the global mining,mineral processing and industrials.
Horizontal heavy duty slurry pump
Vertical cantilever sump pump
Unlined metal gravel and sand pump
Replaceable metal and rubber lined pump
Versatile slurry pump spare parts
2004 polaris 700 xc sp edge snowmobile service repair manualfjskemdzaqmme
The document provides specifications for the Polaris 500 XC SP snowmobile, including engine details, carburetor settings, clutch components, dimensions, and suspension information. It lists the model number, engine displacement of 500cc, and carburetor as a 38mm Mikuni TM with jetting specifications. Drive clutch components include shift weights of 10-56 and spring colors of black/green. The rear suspension is the EDGE type and front is EDGE IFS with specified shock part numbers. Overall vehicle length is listed as 113 inches.
2004 polaris 800 xc sp edge snowmobile service repair manualfjjfyjsekdmme
The document provides specifications for the Polaris 500 XC SP snowmobile, including engine details, carburetor settings, clutch components, dimensions, and suspension information. It lists the model number, engine displacement, cylinder count, piston details, operating RPM range, and other engine specs. Drive system specs such as shift weights, springs, chaincase gearing are also included. Dimensions, capacities, and suspension details are presented. The specifications cover various ambient temperature and altitude ranges.
Hyundai R145CR-9 Crawler Excavator Service Repair Manual.pdfdjfksekmdmdm
The document provides instructions for removing and installing a hydraulic pump. It describes:
1) Lowering work equipment, releasing pressure from lines before removal, draining oil from the tank.
2) Disconnecting hoses and pipes, removing mounting bolts, and pulling the pump assembly out of the housing.
3) Reinstallation is done in reverse order, adding new oil and bleeding air from the system before testing.
1. The wet parts of the FSB series centrifugal pump are made of fluoroplastic alloy.
2. Compact structure, easily operating, and economical.
3. The pump casings, impellers, and mechanical seals of FSB/FSB (D) are interchangeable.
4. Impeller, mechanical seal and shaft are integrity, the torque transferred by morse taper shaft, and the shaft sealed by WB2 mechanical seal.
5. Main wet parts can be made by several material like: fluoroplastic , fluoroplastic alloy and PDFE etc.
6. Bracket structure, mating different power motors according to Medium gravity .
7. Grease – lubricated bearing,the bearing box needed to filled in engine oil .
Contact Us
Anhui Wolong Pump & Valve Co., Ltd Shanghai Branch
Add :Room A145, Lane 505, Changqing Road, Pudong New Dist., Shanghai, China
Email :sales@wolongpump-sh.com
Tel :0086 21 6841 5960
Fax :+86 21 6841 6330
Web :www.wolongpump-sh.com
2005 polaris 600 xc sp snowmobile service repair manualfjskemdzaqmme
- This document is the 2005 performance service manual for Polaris snowmobiles including the 500 XC SP, 600 XC SP, 700 XC SP, 800 XC SP, and 900 FUSION models. It provides specifications, maintenance procedures, diagrams and other technical information for certified technicians. The manual covers engine, clutch, suspension, electrical and other systems.
2005 polaris 500 xc sp m 10 snowmobile service repair manualolfjsekdmmes
- This document is the 2005 performance service manual for Polaris snowmobiles including the 500 XC SP, 600 XC SP, 700 XC SP, 800 XC SP, and 900 FUSION models. It provides specifications, maintenance procedures, diagrams and other technical information for certified technicians. The manual covers engine, clutch, suspension, electrical and other systems.
2005 polaris 700 xc sp m 10 snowmobile service repair manualfjjfyjsekdmme
- This document is the 2005 performance service manual for Polaris snowmobiles including the 500 XC SP, 600 XC SP, 700 XC SP, 800 XC SP, and 900 FUSION models. It provides specifications, maintenance procedures, diagrams and other technical information for certified technicians. The manual covers engine, clutch, suspension, electrical and other systems.
2005 polaris 700 xc sp edge snowmobile service repair manualfjjsekwsxkdmmem
- This document is the 2005 performance service manual for Polaris snowmobiles including the 500 XC SP, 600 XC SP, 700 XC SP, 800 XC SP, and 900 FUSION models. It provides specifications, maintenance procedures, diagrams and other technical information for certified technicians. The manual covers engine, clutch, suspension, electrical and other systems.
Similar to Moyno l4 drive end operations and assembly (10)
How to Implement a Real Estate CRM SoftwareSalesTown
To implement a CRM for real estate, set clear goals, choose a CRM with key real estate features, and customize it to your needs. Migrate your data, train your team, and use automation to save time. Monitor performance, ensure data security, and use the CRM to enhance marketing. Regularly check its effectiveness to improve your business.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Company Valuation webinar series - Tuesday, 4 June 2024FelixPerez547899
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
HOW TO START UP A COMPANY A STEP-BY-STEP GUIDE.pdf46adnanshahzad
How to Start Up a Company: A Step-by-Step Guide Starting a company is an exciting adventure that combines creativity, strategy, and hard work. It can seem overwhelming at first, but with the right guidance, anyone can transform a great idea into a successful business. Let's dive into how to start up a company, from the initial spark of an idea to securing funding and launching your startup.
Introduction
Have you ever dreamed of turning your innovative idea into a thriving business? Starting a company involves numerous steps and decisions, but don't worry—we're here to help. Whether you're exploring how to start a startup company or wondering how to start up a small business, this guide will walk you through the process, step by step.
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...Neil Horowitz
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Digital Marketing with a Focus on Sustainabilitysssourabhsharma
Digital Marketing best practices including influencer marketing, content creators, and omnichannel marketing for Sustainable Brands at the Sustainable Cosmetics Summit 2024 in New York
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
1. Section:
L and J FRAME PUMPS
Page: 1
Date: (Revision 11/94)
OPERATION – ASSEMBLY INSTRUCTIONS AND PARTS LIST FOR
“L4” DRIVE END
(FRAMES SIZES 1L4, 2L4, 3L4, 3M3, 6M3, 3P2, 6P2, 9P2)
GENERAL
The Moyno
®
Pump is one of the most versatile pumps
available. It has been proven in thousands of applications
over the past 50 years. It is backed by the experience
gained over the years, both in application and manufacturing
know-how.
The Moyno progressing cavity pump is a single-screw
rotary pump. The pumping action is created by the single
helical rotor rolling eccentrically in the double threaded helix
of the stator. In its revolution, the rotor forms in conjunction
with the stator a series of sealed cavities 180 degrees apart.
As the rotor turns the cavities progress from the suction to
the discharge. As one cavity diminishes, the opposing cavity
is increasing at exactly the same rate. Thus, the sum of the
two discharges is a constant volume. The result is a
pulsation-less positive displacement flow with no valves.
WARNING
1. Enclose all rotating belts, pulleys, drive shafts, etc., to
comply with acceptable industry safety standards for
rotating equipment. Failure to comply could result in
personal injury.
2. All pulleys have speed limitations. Refer to pulley
manufacturer’s literature for specifications and follow all
recommendations, to prevent personal injury.
NAMEPLATE DATA
The Moyno Pump nameplate, located on the bearing
housing, carries the serial number, frame size, and type
designation. All are extremely important and must be used
when ordering spare parts.
Record the nameplate data of your pump in the spaces
provided in the heading of Page 3.
Moyno Pumps are identified by Frame and Type. Pump
Frame is essentially an indication of size. It consists of a
number, a letter, and a number (i.e. 2L4). The first number
indicates the number of stages in the pumping elements.
The letter indicates the model. The final number indicates
the size of the rotor-stator pumping elements. A frame 2L4
pump, therefore, has two stages of size 4 pumping
elements.
The “L” in the frame size indicates a standard
relationship between the housing, bearings, and drive shaft
and the size of the pumping elements. Many variations may
be made by adapting smaller element sizes to a larger drive
end size. This may be necessary due to the severity of a
specific pumping application. In cases where the drive end
(housing, bearings, and drive shaft) is one size larger than
the element size normally used, the pump is referred to
as an “M” frame pump (i.e. 3M3). If the drive end is two
sizes larger than the element size, the pump is referred to
as a “P” frame. Thus, a frame 3L4, 3M3, and 3P2 would all
use a common drive end.
Type designation is a series of letters which identify the
“Materials of Construction” in component groups of parts.
The usual type designation will consist of three letters.
The first letter identifies the material of the suction
housing casting or the body casting where the bearing
housing is a part of the suction housing.
C — Cast Iron
E — Alloy cb-20 Stainless
H — Hastelloy “C”
M — Monel
S — 316 Stainless Steel
W — Cast Steel (Available only on 1L14 body)
X — Special to application
The second letter indicates the material used in the drive
shaft, pins, connecting rod, rotor, and other minor metallic
parts in contact with the material being pumped.
D — Alloy Steel
E — Alloy cb-20 Stainless
G — 416 Stainless Steel
H — Hastelloy “C”
J — 17-4 PH Stainless Steel
M — Monel
S — 316 Stainless Steel
X — Special to application
The third letter determines the material of the stator. It
identifies only the stator material and not that of the tube in
which the stator is placed.
B — EPDM 300, 70 Durometer
C — Nitrile 103, 50 Durometer
D — Tool Steel
E — Nitrile 110, 70 Durometer
F — Viton 500, 75 Durometer
G —416 Stainless Steel
H — Hastelloy “C”
J — 17-4 PH Stainless Steel
K — Hypalon 800, 70 Durometer
M — Nitrile 100M, 70 Durometer
P — Thiokol 70 Durometer
Q — Nitrile 100, 700 Durometer
R — Natural Rubber 200, 55 Durometer
T — Teflon 15% glass
U — Urethane 70 Durometer
X — Special to application
Z — Nitrile 150, 70 Durometer
3. * Add third letter of type designation to complete Part No. ** Bearing Kit includes Items A thru G
EX: Type CDQ pump – add Q to basic number of stator
*** Connecting Rod Kit includes items Q thru V. + See pages 5 – 6 for variations
“L4” DRIVE END PARTS
TYPE DESIGNATIONS
Select type column corresponding to type designation at left.
Order by part number Refer to frame size to select proper rotor and stator.
REF.
NO. DESCRIPTION
CDQ
CDR
CDB
CDF
Part No.
CDD
CDG
CDT
Part No.
CSQ
CSR
CSB
CSF
Part No.
CSG
CSD
CST
Part No.
SSQ
SSR
SSB
SSF
Part No.
SSG
SST
Part No.
A. Ball Bearing (Radial) A04291 A04291 A04291 A04291 A04291 A04291
B. Ball Bearing (Thrust) A04301 A04301 A04301 A04301 A04301 A04301
C. Bearing Spacer A04331 A04331 A04331 A04331 A04331 A04331
D. Bearing Lock Nut A04581 A04581 A04581 A04581 A04581 A04581
E. Bearing Lock Washer A04591 A04591 A04591 A04591 A04591 A04591
F. Grease Seal (Radial) A04611 A04611 A04611 A04611 A04611 A04611
G. Grease Seal (Thrust) A04621 A04621 A04621 A04621 A04621 A04621
Bearing Kit** K04291 K04291 K04291 K04291 K04291 K04291
H. Bearing Housing A04051 A04051 A04051 A04051 A04051 A04051
I. Bearing Cover Plate A04341 A04341 A04341 A04341 A04341 A04341
J. Pump Support A04371 A04371 A04371 A04371 A04371 A04371
K. Shaft Collar A04491 A04491 A04491 A04491 A04491 A04491
M. Lantern Ring A04571 A04571 A04571 A04571 A04571 A04571
N. Stator Support 1L4, 2L4
3L3, 6M3 A04381 A04382 A04381 A04382 A04381 A04382
3M3, 6P2, 3P2 A04381 A04381 A04381 A04381 A04381 A04381
9P2 A04383 ---------- A04383 ---------- A04383 ----------
O. Support Bushing 3M3 A04711 ---------- A04711 ---------- A04711 ----------
3P2, 6P2 A03711 A04711 A03711 A04711 A03711 A04711
P. Pin Retainer A04501 A04501 A04501 A04501 A04501 A04501
Q. Retaining Screw Washer A04731 A04731 A04731 A04731 A04731 A04731
R. Connecting Rod Washer A04531 A04531 A04531 A04531 A04531 A04531
S. Connecting Rod B0425D B0425D B0425S B0425S B0425S B0425S
T. Rotor Pin B0445D B0445D B0445S B0445S B0445S B0445S
U. Shaft Pin B0446D B0446D B0446S B0446S B0446S B0446S
V. Drive Pin Retaining Screw B0454D B0454D B0454S B0454S B0454S B0454S
Connecting Rod Kit*** K0425D K0425D K0425S K0425S K0425S K0425S
W. Suction Housing B04021 B04022 B04021 B04022 B04026 B04027
X. Reducer 1L4, 2L4, 3L4 B04091 B04092 B04091 B04092 B04096 B04097
6M3 B03092 B04092 B03091 B04092 B03096 B04097
3M3 B03091 B03092 B03091 B03092 B03096 B03097
3P2, 6P2 B02091 B02092 B02091 B02092 B02096 B02097
9P2 B03091 ---------- B03091 ---------- B03096 ----------
Y. Drive Shaft + B04261 B04261 B04266 B04266 B04266 B04266
Z. Packing Gland B0441D B0441D B0441S B0441S B0441S B0441S
AA. Packing + B04421 B04421 B04425 B04425 B04425 B04425
BB. Packing Washer B0465D B0465D B0465S B0465S B0465S B0465S
CC. Adapter Bushing 3M3, 9P2 B03512 B04511 B03512 B04511 B04516 B03517
3P2, 6P2 B04512 B03511 B04512 B03512 B04517 B03517
FF. Stator Frame 1L4 C4104* C4104* C4104* C4104* C5104* C5104*
Frame 2L4 C4204* C4204* C4204* C4204* C5204* C5204*
Frame 3L4 C4304* C4304* C4304* C4304* C5304* C5304*
Frame 3M3 C4303* C4303* C4303* C4303* C5303* C5303*
Frame 6M3 C4603* C4603* C4603* C4603* C5603* C5603*
Frame 3P2 C4303* C4303* C4302* C4302* C5302* C5302*
Frame 6P2 C4602* C4602* C4602* C4602* C5602* C5602*
Frame 9P2 C4902* ---------- C4902* ---------- C5902* ----------
GG. Rotor Frame 1L4 + C71041 C71041 C81041 C81041 C81041 C81041
Frame 2L4 + C72041 C72041 C82041 C82041 C82041 C82041
Frame 3L4 + C73041 C73041 C83041 C83041 C83041 C83041
Frame 3M3 + M73031 M73031 M83031 M83031 M83031 M83031
Frame 6M3 + C76031 C76031 C86031 C86031 C86031 C86031
Frame 3P2 + P73021 P73021 P83021 P83021 P83021 P83021
Frame 6P2 + P76021 P76021 P86021 P96021 P86021 P86021
Frame 9P2 + P79021 ---------- P89021 ---------- P89021 ----------
3
4. A typical type designation such as CDQ would result in
the following:
C = Cast Iron Suction Housing
D = Hardened Steel Internals including drive shaft,
pins, connecting rod, rotor, and other minor
metallic parts in contact with the material being
pumped
• Q = Buna N Synthetic Rubber Stator (70 durometer)
Also included on the nameplate is the three-character
trim code designation. This only appears on pumps which
have semi-standard or special construction. The first letter
identifies sealing variations, the second character identifies
internal variations, and the third letter identifies rotor
variations.
On page 5 of this manual are variations available for
modifying pumps to meet specialized pumping conditions. If
the trim code of your pump is other than “AAA", contact your
nearest Moyno representative for clarification. Do not use
any variation unless you have determined that it is
compatible with your application.
INSTRUCTIONS FOR DISASSEMBLY AND ASSEMBLY
Frames 1L4, 2L4, 3L4, 3M3, 6M3, 3P2, 6P2, 9P2
Disassembly Procedure
1. Disconnect the power source.
2. Close the suction and discharge valves to isolate the
pump from the line.
3. Turn off flush water to packing or rotary seal if used.
4. Remove drain plug in suction housing to drain away any
fluid remaining in pump.
5. Place a support block under suction housing in area of
drain plug. Wooden blocks are sufficient. The purpose is
to prevent undue stress on pump support when pump is
disassembled.
6. Disconnect piping from stator end of pump.
7. Stator Removal - With pipe wrench or strap wrench
remove discharge reducer (X). Remove cap of stator
support and with strap wrench or pipe wrench, unscrew
the stator (FF) from the suction housing. Pull Stator off
the rotor.
8. Rotor Removal . The rotor (GG) is removed with the
connecting rod (S) and rotor pin (T) as a unit. Removal
of the unit is accomplished by removing the two drive
pin retaining screws (V) located in the shaft collar (K).
This step reveals the shaft drive pin (U) which is
removed by driving the pin from the drive shaft (Y) with
a small punch or drift pin. Slide the shaft collar toward
the packing gland (Z) and remove the retaining screw
washers (Q) from each side of the drive shaft. The rotor
and connecting rod can now be removed by pulling
them from the pump. To disassemble, clamp the
connecting rod (S) by its mid-section in a vise and, with
a drift pin, drive the pin retainer (P) from the head of the
rotor. The rotor pin (T) can now be removed from the
rotor freeing the connecting rod. Remove the
connecting rod washers (R) if present.
9. To remove packing (AA), remove nuts holding packing
gland (Z). Slip packing gland from studs, remove
packing rings, lantern ring (M), and remaining packing
rings. Packing rings can be removed with a standard
packing puller. Note: If step 10 is to be performed, it
should precede step 9 as packing can then be removed
by freeing packing gland and driving packing, lantern
ring, and packing washer (BB) from housing using a
small rod. Rod should enter where stator screws into
suction housing. Place rod on packing washer and tap.
Entire set should easily exit from opposite end of
stuffing box.
10. Drive Shaft & Bearing Removal - With rotor removed
it is now possible to remove the drive shaft and
bearings as a sub-assembly. Remove the four cap
screws holding the bearing cover plate (I) and slip from
shaft. Insert a bar or rod into the hollow end of drive
shaft (Y) where it enters the suction cavity. By tapping
on the rod the entire assembly will be forced from the
bearing housing.
To disassemble, remove bearing lock nut (D) and
bearing lock washer (E). Using an arbor press remove
radial bearing (A), bearing spacer (C), and thrust
bearing (B). Apply pressure to inner race only.
When replacing drive shaft and/or bearings, it is
recommended that both grease seals be replaced.
Grease seals are pressed into the bearing housing and
bearing cover plate.
Assembly Procedure
Moyno pumps are reassembled in the reverse order of
disassembly with special notes as outlined below:
1. Always replace all old washers, “O” rings, and packing.
We also recommend replacing grease seals when new
bearings are installed.
2. Bearing Shaft Assembly - When installing new
bearings, make sure that they are seated against the
shoulder on the shaft. Replace bearing lock washer and
bearing lock nut. Tighten bearing lock nut securely.
Bend tab down onto lock nut to prevent loosening of
nut.
Make sure that the shaft collar, packing gland, and
packing washer are installed on the drive shaft as the
hollow end emerges in the bearing housing and
approaches the stuffing box area.
When replacing the bearing cover plate, tighten all cap
screws evenly to prevent damage to the bearing cover
plate and thrust grease seal.
Do not over-lubricate bearings. (See Maintenance)
3. When installing the connecting rod, make sure that the
hole in the rod is aligned with the holes in the drive
shaft and shaft collar before inserting the pin. Always
use retaining screw washers and make sure that the
hollowed end of the retaining screw fits over the end of
the shaft pin to ensure a tight fit. Retaining screws
must seat on retaining screw washers and not on pin.
4. When replacing packing, insert two rings on the shaft,
the lantern ring, and then four more rings. This will allow
the lantern ring to line up with the grease fitting on the
stuffing box. Make sure you stagger the ends of the
packing rings.
When installing the new packing, you may find that all
but one ring will go on the drive shaft. When the pump
has run for a short time and the new packing is
compressed, this final ring can be installed.
5. When installing the stator on the rotor, it is best to
lubricate the rotor with water (or a lubricant compatible
with the rubber in the stator) to allow the stator to slip
on easier. (Grease or oil is not compatible with type "R”
or “B” stators.)
When replacing the stator, always tighten it with the
pipe wrench on the end of the stator nearest the suction
housing. This will prevent it from binding and damaging
the threads.
If your stator has a stainless steel sleeve, use a teflon
tape or similar material on the threads before replacing
-- on all stators with a carbon steel sleeve, use pipe
dope.
4
5. 6. CautIon: Dry operation is harmful to the pump.
Always fill the pump with fluid to be handled prior to
start up. Check any valves in discharge line to
determine that no restrictions exist.
MAINTENANCE
The Moyno pump has been designed for a minimum of
maintenance, the extent of which is routine lubrication and
adjustment of packing and infrequent lubrication of the
bearings. The pump is one of the easiest to work on in that
the main elements are very accessible and require few tools
to disassemble.
Packing
The Moyno pump is normally furnished with die formed
packing. The packing may be either grease lubricated
through a grease fitting in the stuffing box or have plumbing
connected to the housing to allow a water flush. (See Water
Flush of Packing)
Packing gland adjusting nuts should be evenly adjusted
so they are little more than finger tight. Over-tightening of the
packing gland may result in premature packing failure and
possible damage to the shaft and gland. When the packing
is new, frequent minor adjustments are recommended for
the first few hours of operation in order to compress and
seat the packing. Greasing the packing often but with limited
quantities of grease is the best practice. This can be done
through a grease fitting which leads to a lantern ring in the
mid-section of the packing. Do not use a one-piece spiral
wrap of packing.
Water Flush of Packing
When the material being pumped is abrasive in nature, it
may be advantageous to flush the packing to prevent
leakage under packing and excessive shaft wear.
Clean water can be injected through a 1/8” NPT tapped
hole that normally houses the grease fitting for lubricating
the packing. The water can be permitted to leak axially along
the shaft in either direction or can be removed from the
second tapped hole in the stuffing box. In both cases, the
discharge from the stuffing box should be throttled slightly to
maintain 10-15 PSI higher pressure in the stuffing box than
is present in the suction housing.
This is a basic arrangement, other variations can be used.
(1) Throttling Valve (2) Pressure Guage (3) Pressure
Regulating Valve
Bearings
The Moyno pump is equipped with ball bearings in the drive
end size L2 through L10. The bearings are lubricated at the
factory and do not need additional lubrication for at least 1500
hours of normal operation.
When relubricating the bearings, the bearing-shaft
assembly should be removed (See Disassembly instructions)
and cleaned of old grease. Add only enough grease to fill the
area between the bearings 1/3 full. Add a few drops of oil to
bearing seals before reassembling. It is normal for bearings to
run warm to the touch for the first few hours of operation.
Any type of Ep Lithium soap base grease is satisfactory for
bearing lubrication. The use of Sodium or Calcium base grease
is not recommended.
The following is a partial listing of approved
bearing lubricants:
Dow Corning DC 33
Keystone Lubricating Co. Keystone #89
Texaco Regal AFB2
Shell Oil Co. Cyprina #3
Humble Oil & Refining Co. Beacon 325
American Oil Co. Supermil Grease #A72832
Mobil EP1
Shell Oil Co. Alvania #2
VARIATIONS OF STANDARD PARTS
Following are variations available for modifying pumps to
meet specialized pumping conditions. If the trim code of your
pump is other than “AAA,” contact your nearest Moyno
representative for clarification. Do not modify your pump with
any variation unless you have determined that it is compatible
with your application.
The three-character trim code is designed as follows. The
first character identifies any sealing variations, the second
character identifies any internal variations, and the third
character identifies any rotor variations.
5