2. The specifications and technical data may be subject to possible modifications without notice. 2/32
COMPANY
Solar Innova is a global company in the Renewable Energy sector, mainly in the Solar
fiel, both Photovoltaic and Thermal Energy, enabling our customers to improve efficiency
facilities and energy while reducing environmental impact.
Technology plays a key role in Solar Innova.
We develop products with advanced technologies that allow us to be more competitive
and to respect the environment. We are committed to providing our customers high quality
services to meet your expectations and guarantee your complete satisfaction.
We have a distribution network in constant growth, to provide a service with maximum
quality and speed.
We have a distribution network in constant growth, to provide the highest quality care
and speed.
We want to be present in all areas where is the development of alternative energy,
offering added value to our products and services such as:
√ Advice
√ Competitiveness
√ Sustainability
√ Professionalism
√ Service quality
√ Certified by internationally recognized laboratories
3. The specifications and technical data may be subject to possible modifications without notice. 3/32
MOUNTING RACKS
One of the most important elements in a photovoltaic installation, to ensure optimum use of
solar radiation is the support structure, in charge of supporting the solar modules, providing
the most appropriate inclination for modules receive the highest amount of radiation over of
the year.
Solar Innova structures are designed to withstand the elements. The materials used are hot
dip galvanized steel (UNE 37-501 and UNE 37-508 standards) that meets the minimum
required thickness according to the UNE EN ISO 1461. The screws used is galvanized or
stainless steel and meets the standard MV-106.
Galvanized coatings are metallurgically bonded to the steel base, so have excellent adhesion.
To be comprised of several even tougher than steel, and an outer layer of softer zinc layers of
zinc-iron alloys, are very resistant to impact and abrasion system.
The Solar Innova technical department designs the type of structure that completely suits the
particular needs of each client. Solar Innova has a wide range of standardized structures.
4. The specifications and technical data may be subject to possible modifications without notice. 4/32
SLOPING – SCREW – SI-ESF-S-CIT
DESCRIPTION
√ Place of installation: sloping roof
√ Frame of the module: depending on the order
√ Height: depending on the order
√ Maximum wind load: 150 km/h
√ Maximum snow load: 1.4 kN/m2
√ Module type: with frame or frameless
√ Module orientation: horizontal or vertical
√ Module size: any
√ Material: depending on the order
√ Warranty: 15 years
CERTIFICATES
Our production facilities have been prepared in accordance with the provisions of the
Guidelines:
√ ISO 9001:2008, in terms of Quality Management Systems..
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
5. The specifications and technical data may be subject to possible modifications without notice. 5/32
SLOPING – TILE SABER – SI-ESF-S-CIS
DESCRIPTION
√ Place of installation: sloping roof
√ Frame of the module: depending on the order
√ Height: depending on the order
√ Maximum wind load: 150 km/h
√ Maximum snow load: 1.4 kN/m2
√ Module type: with frame or frameless
√ Module Orientation: horizontal or vertical
√ Module size: any
√ Material: depending on the order
√ Warranty: 15 years
CERTIFICATES
Our production facilities have been prepared in accordance with the provisions of the
Guidelines:
√ ISO 9001:2008, in terms of Quality Management Systems..
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
6. The specifications and technical data may be subject to possible modifications without notice. 6/32
BALLAST – SI-ESF-S-CPL
DESCRIPTION
√ Installation place: flat roof
√ Module frame: depending on the order
√ Height: depending on the order
√ Maximum wind load: 130 km/h
√ Maximum snow load: 1 kN/m2
√ Module type: with frame
√ Module orientation: horizontal or vertical
√ Module size: any
√ Material: aluminum alloy
√ Warranty: 15 years
CERTIFICATES
Our production facilities have been prepared in accordance with the provisions of the
Guidelines:
√ ISO 9001:2008, in terms of Quality Management Systems..
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
7. The specifications and technical data may be subject to possible modifications without notice. 7/32
WIND STOP – SI-ESF-S CPP
DESCRIPTION
√ Installation place: flat roof
√ Height: depending on the order
√ Module frame: depending on the order
√ Maximum wind load: 130 km/h
√ Maximum snow load: 1 kN/m2
√ Module type: with frame
√ Module orientation: horizontal
√ Module size: any
√ Material: depending on the order
√ Warranty: 15 years
CERTIFICATES
Our production facilities have been prepared in accordance with the provisions of the
Guidelines:
√ ISO 9001:2008, in terms of Quality Management Systems..
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
8. The specifications and technical data may be subject to possible modifications without notice. 8/32
TRIANGULAR - SI-ESF-S-CPT
DESCRIPTION
√ Installation place: three sides system flat and sloping roofs
√ Height: depending on the order
√ Module frame: depending on the order
√ Maximum wind load: 130 km/h
√ Maximum snow load: 1 kN/m2
√ Module type: with frame
√ Module orientation: horizontal or vertical
√ Module size: any
√ Material: aluminum alloy
√ Color: natural
√ Warranty: 15 years
CERTIFICATES
Our production facilities have been prepared in accordance with the provisions of the
Guidelines:
√ ISO 9001:2008, in terms of Quality Management Systems..
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
9. The specifications and technical data may be subject to possible modifications without notice. 9/32
ONE PILE - VERTICAL - SI-ESF-S-SM1V
One pole structure for installation on the ground through direct nailed of the pole, designed to
accommodate one rows of standard panels, row portrait.
10. The specifications and technical data may be subject to possible modifications without notice. 10/32
ONE PILE - VERTICAL - SI-ESF-S-SM1V
QUALITY
√ The quality of Steel in all elements of these structures is S-235/275-JR, according to UNE-EN
10027-1:2006 and CR 10260.
√ The structures are dapted to the different dimensions of the panel son the market (one row
of panels) even with the assembled structure.
√ All structural elements and fixings are hot dip galvanized at 450º C, according to ISO
1461:2010.
√ Elements can be supplied with other qualities and finishes depending on customer
requirements and based on the UNE-EN 10326:2007 (Ex: S250GD + Z275).
√ The elements have a durable galvanized as set forth in the EN ISO 14713:2011, depending
on the type of environment to which they are exposed.
√ In these structures the connections between all elements are bolted, not welded existing
before or after the finishing process.
√ Including all hardware and fasteners. The hardware is stainless Steel quality A2, metric M8-
M10-M12-M16.
√ Ease of installation due to the simplicity of its elements and connections.
√ Systems perfect adaptability to the topography of the land.
√ Do not need foundation or any type of civil works.
CERTIFICATES
Our manufacturing plants have been prepared in accordance with:
√ ISO 9001:2008, in terms of Quality Management Systems.
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
WARRANTY
Manufacturing defects: 15 years.
11. The specifications and technical data may be subject to possible modifications without notice. 11/32
ONE PILE - HORIZONTAL - SI-ESF-S-SM2H
One pole structure for installation on the ground through direct nailed of the pole, designed to
accommodate one rows of standard panels, row landscape.
12. The specifications and technical data may be subject to possible modifications without notice. 12/32
ONE PILE - HORIZONTAL - SI-ESF-S-SM2H
QUALITY
√ The quality of Steel in all elements of these structures is S-235/275-JR, according to UNE-EN
10027-1:2006 and CR 10260.
√ The structures are dapted to the different dimensions of the panel son the market (two rows
of panels) even with the assembled structure.
√ All structural elements and fixings are hot dip galvanized at 450º C, according to ISO
1461:2010.
√ Elements can be supplied with other qualities and finishes depending on customer
requirements and based on the UNE-EN 10326:2007 (Ex: S250GD + Z275).
√ The elements have a durable galvanized as set forth in the EN ISO 14713:2011, depending
on the type of environment to which they are exposed.
√ In these structures the connections between all elements are bolted, not welded existing
before or after the finishing process.
√ Including all hardware and fasteners. The hardware is stainless Steel quality A2, metric M8-
M10-M12-M16.
√ Ease of installation due to the simplicity of its elements and connections.
√ Systems perfect adaptability to the topography of the land.
√ Do not need foundation or any type of civil works.
CERTIFICATES
Our manufacturing plants have been prepared in accordance with:
√ ISO 9001:2008, in terms of Quality Management Systems.
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
WARRANTY
Manufacturing defects: 15 years.
13. The specifications and technical data may be subject to possible modifications without notice. 13/32
ONE PILE - VERTICAL - SI-ESF-S-SM2V
One pole structure for installation on the ground through direct nailed of the poles, designed to
accommodate 2 rows with 22 standard panels, row portrait.
14. The specifications and technical data may be subject to possible modifications without notice. 14/32
ONE PILE - VERTICAL - SI-ESF-S-SM2V
QUALITY
√ Weight: 63 Tn/MW.
√ The quality of Steel in all elements of these structures is S-235/275-JR, according to UNE-EN
10027-1:2006 and CR 10260.
√ The structures are dapted to the different dimensions of the panel son the market (two rows
of panels) even with the assembled structure.
√ All structural elements and fixings are hot dip galvanized at 450º C, according to ISO
1461:2010.
√ Elements can be supplied with other qualities and finishes depending on customer
requirements and based on the UNE-EN 10326:2007 (Ex: S250GD + Z275).
√ The elements have a durable galvanized as set forth in the EN ISO 14713:2011, depending
on the type of environment to which they are exposed.
√ In these structures the connections between all elements are bolted, not welded existing
before or after the finishing process.
√ Including all hardware and fasteners. The hardware is stainless Steel quality A2, metric M8-
M10-M12-M16.
√ Ease of installation due to the simplicity of its elements and connections.
√ Systems perfect adaptability to the topography of the land.
√ Do not need foundation or any type of civil works.
CERTIFICATES
Our manufacturing plants have been prepared in accordance with:
√ ISO 9001:2008, in terms of Quality Management Systems.
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
WARRANTY
Manufacturing defects: 15 years.
15. The specifications and technical data may be subject to possible modifications without notice. 15/32
ONE PILES - HORIZONTAL - SI-ESF-S-SM3H
One pole structure for installation on the ground through direct nailed of the pole, designed to
accommodate three rows of standard panels, row landscape.
16. The specifications and technical data may be subject to possible modifications without notice. 16/32
ONE PILES - HORIZONTAL - SI-ESF-S-SM3H
QUALITY
√ The quality of Steel in all elements of these structures is S-235/275-JR, according to UNE-EN
10027-1:2006 and CR 10260.
√ The structures are dapted to the different dimensions of the panel son the market (three
rows of panels) even with the assembled structure.
√ All structural elements and fixings are hot dip galvanized at 450º C, according to ISO
1461:2010.
√ Elements can be supplied with other qualities and finishes depending on customer
requirements and based on the UNE-EN 10326:2007 (Ex: S250GD + Z275).
√ The elements have a durable galvanized as set forth in the EN ISO 14713:2011, depending
on the type of environment to which they are exposed.
√ In these structures the connections between all elements are bolted, not welded existing
before or after the finishing process.
√ Including all hardware and fasteners. The hardware is stainless Steel quality A2, metric M8-
M10-M12-M16.
√ Ease of installation due to the simplicity of its elements and connections.
√ Systems perfect adaptability to the topography of the land.
√ Do not need foundation or any type of civil works.
CERTIFICATES
Our manufacturing plants have been prepared in accordance with:
√ ISO 9001:2008, in terms of Quality Management Systems.
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
WARRANTY
Manufacturing defects: 15 years.
17. The specifications and technical data may be subject to possible modifications without notice. 17/32
TWO PILES - VERTICAL - SI-ESF-S-SB2V
Two poles structure for installation on the ground through direct nailed of the poles, designed
to accommodate 2 rows with 36 standard panels, row portrait.
18. The specifications and technical data may be subject to possible modifications without notice. 18/32
TWO PILES - VERTICAL - SI-ESF-S-SB2V
QUALITY
√ Weigth: 110 Tn/MW.
√ The quality of Steel in all elements of these structures is S-235/275-JR, according to UNE-EN
10027-1:2006 and CR 10260.
√ The structures are dapted to the different dimensions of the panel son the market (two rows
of panels) even with the assembled structure.
√ All structural elements and fixings are hot dip galvanized at 450º C, according to ISO
1461:2010.
√ Elements can be supplied with other qualities and finishes depending on customer
requirements and based on the UNE-EN 10326:2007 (Ex: S250GD + Z275).
√ The elements have a durable galvanized as set forth in the EN ISO 14713:2011, depending
on the type of environment to which they are exposed.
√ In these structures the connections between all elements are bolted, not welded existing
before or after the finishing process.
√ Including all hardware and fasteners. The hardware is stainless Steel quality A2, metric M8-
M10-M12-M16.
√ Ease of installation due to the simplicity of its elements and connections.
√ Systems perfect adaptability to the topography of the land.
√ Do not need foundation or any type of civil works.
CERTIFICATES
Our manufacturing plants have been prepared in accordance with:
√ ISO 9001:2008, in terms of Quality Management Systems.
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
WARRANTY
Manufacturing defects: 15 years.
19. The specifications and technical data may be subject to possible modifications without notice. 19/32
TWO PILES - HORIZONTAL - SI-ESF-S-SB3H
Two poles structure for installation on the ground through direct nailed of the pole, designed to
accommodate three rows of standard panels, row landscape.
20. The specifications and technical data may be subject to possible modifications without notice. 20/32
TWO PILES - HORIZONTAL - SI-ESF-S-SB3H
QUALITY
√ The quality of Steel in all elements of these structures is S-235/275-JR, according to UNE-EN
10027-1:2006 and CR 10260.
√ The structures are dapted to the different dimensions of the panel son the market (three
rows of panels) even with the assembled structure.
√ All structural elements and fixings are hot dip galvanized at 450º C, according to ISO
1461:2010.
√ Elements can be supplied with other qualities and finishes depending on customer
requirements and based on the UNE-EN 10326:2007 (Ex: S250GD + Z275).
√ The elements have a durable galvanized as set forth in the EN ISO 14713:2011, depending
on the type of environment to which they are exposed.
√ In these structures the connections between all elements are bolted, not welded existing
before or after the finishing process.
√ Including all hardware and fasteners. The hardware is stainless Steel quality A2, metric M8-
M10-M12-M16.
√ Ease of installation due to the simplicity of its elements and connections.
√ Systems perfect adaptability to the topography of the land.
√ Do not need foundation or any type of civil works.
CERTIFICATES
Our manufacturing plants have been prepared in accordance with:
√ ISO 9001:2008, in terms of Quality Management Systems.
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
WARRANTY
Manufacturing defects: 15 years.
21. The specifications and technical data may be subject to possible modifications without notice. 21/32
TWO PILES - VERTICAL - SI-ESF-S-SB3V
Two poles structure for installation on the ground through direct nailed of the poles, designed
to accommodate three rows of standard panels, row portrait.
22. The specifications and technical data may be subject to possible modifications without notice. 22/32
TWO PILES - VERTICAL - SI-ESF-S-SB3V
QUALITY
√ The quality of Steel in all elements of these structures is S-235/275-JR, according to UNE-EN
10027-1:2006 and CR 10260.
√ The structures are dapted to the different dimensions of the panel son the market (three
rows of panels) even with the assembled structure.
√ All structural elements and fixings are hot dip galvanized at 450º C, according to ISO
1461:2010.
√ Elements can be supplied with other qualities and finishes depending on customer
requirements and based on the UNE-EN 10326:2007 (Ex: S250GD + Z275).
√ The elements have a durable galvanized as set forth in the EN ISO 14713:2011, depending
on the type of environment to which they are exposed.
√ In these structures the connections between all elements are bolted, not welded existing
before or after the finishing process.
√ Including all hardware and fasteners. The hardware is stainless Steel quality A2, metric M8-
M10-M12-M16.
√ Ease of installation due to the simplicity of its elements and connections.
√ Systems perfect adaptability to the topography of the land.
√ Do not need foundation or any type of civil works.
CERTIFICATES
Our manufacturing plants have been prepared in accordance with:
√ ISO 9001:2008, in terms of Quality Management Systems.
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
WARRANTY
Manufacturing defects: 15 years.
23. The specifications and technical data may be subject to possible modifications without notice. 23/32
TWO PILES - HORIZONTAL - SI-ESF-S-SB4H
Two poles structure for installation on the ground through direct nailed of the pole, designed to
accommodate four rows of standard panels, row landscape.
24. The specifications and technical data may be subject to possible modifications without notice. 24/32
TWO PILES - HORIZONTAL - SI-ESF-S-SB4H
QUALITY
√ The quality of Steel in all elements of these structures is S-235/275-JR, according to UNE-EN
10027-1:2006 and CR 10260.
√ The structures are dapted to the different dimensions of the panel son the market (three
rows of panels) even with the assembled structure.
√ All structural elements and fixings are hot dip galvanized at 450º C, according to ISO
1461:2010.
√ Elements can be supplied with other qualities and finishes depending on customer
requirements and based on the UNE-EN 10326:2007 (Ex: S250GD + Z275).
√ The elements have a durable galvanized as set forth in the EN ISO 14713:2011, depending
on the type of environment to which they are exposed.
√ In these structures the connections between all elements are bolted, not welded existing
before or after the finishing process.
√ Including all hardware and fasteners. The hardware is stainless Steel quality A2, metric M8-
M10-M12-M16.
√ Ease of installation due to the simplicity of its elements and connections.
√ Systems perfect adaptability to the topography of the land.
√ Do not need foundation or any type of civil works.
CERTIFICATES
Our manufacturing plants have been prepared in accordance with:
√ ISO 9001:2008, in terms of Quality Management Systems.
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
WARRANTY
Manufacturing defects: 15 years.
25. The specifications and technical data may be subject to possible modifications without notice. 25/32
PLATE BASE – SI-ESF-S-SP2V
Structure designed to accommodate 2 rows with 12 standard panels, placed row portrait or row
landscape.
DESCRIPTION
√ Installation place: open areas
√ Height: depending on the order
√ Maximum wind load: 150 km/h
√ Maximum snow load: 1.2 kN/m2
√ Module type: with frame
√ Module orientation: horizontal or vertical
√ Module size: any
√ Material: depending on the order
√ Color: natural
√ Warranty: 15 years
26. The specifications and technical data may be subject to possible modifications without notice. 26/32
CARPORT – SI-ESF-S-CARPOT
DESCRIPTION
√ Installation place: open areas
√ Module frame: depending on the order
√ Height: depending on the order
√ Maximum wind load: 150 km/h
√ Maximum snow load: 1.8 kN/m2
√ Type of module: any
√ Module orientation: horizontal or vertical
√ Module size: with frame
√ Material: depending on the order
√ Color: natural
√ Warranty: 15 years
CERTIFICATES
Our production facilities have been prepared in accordance with the provisions of the
Guidelines:
√ ISO 9001:2008, in terms of Quality Management Systems..
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
27. The specifications and technical data may be subject to possible modifications without notice. 27/32
POLE - SI-ESF-S-POLE
DESCRIPTION
√ Installation place: open areas
√ Module frame: depending on the order
√ Height: depending on the order
√ Maximum wind load: 150 km/h
√ Maximum snow load: 1.8 kN/m2
√ Type of module: with frame or frameless
√ Module Orientation: horizontal or vertical
√ Module size: any
√ Material: depending on the order
√ Warranty: 15 years
CERTIFICATES
Our production facilities have been prepared in accordance with the provisions of the
Guidelines:
√ ISO 9001:2008, in terms of Quality Management Systems..
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
28. The specifications and technical data may be subject to possible modifications without notice. 28/32
GREENHOUSE – SI-ESF-S-GREEN
The greenhouses are enclosures in which
temperature, humidity and other environmental
factors are kept help to promote agricultural crops.
They are always located in open areas where they
receive large amounts of direct solar radiation.
The greenhouses commonly used in agriculture,
have an arc section and are located longitudinally
north-south to reduce excessive radiation during
mid-day. The overall result in a cultivation system
is characterized by an optimal temperature profile
avoiding peaks that may be harmful.
The Solar Innova greenhouses are calculated and constructed to resist both the weight of its own roof
with photovoltaic modules and other loads such as rain, wind and snow.
The metallic structure in Solar Innova greenhouses is obtained by repeating a base module whose floor
and elevation dimensions have been designed specifically so that the installation of the photovoltaic
system is completely fit. Its crystal and metal structure is perfect for the integration of solar panels and
from an aesthetic point of view it does not have any impact in the surrounding environment.
In short, the reasons for the installation of a solar greenhouse are:
√ aesthetic value
√ total integration
√ improvement in the production of crops
√ sale of clean energy
√ reduction of CO2 emission among others.
29. The specifications and technical data may be subject to possible modifications without notice. 29/32
GREENHOUSE – SI-ESF-S-GREEN
QUALITY
√ The structures are adapted to the different dimensions of the panels.
√ The quality of steel in all elements of these structures is S-235/275/355JR, according to EN
10027-1:2006 y CR 10260.
√ Elements can be supplied with other qualities and finishes depending on customer
requirements and based on the UNE-EN 10326:2007 (Ex: S250SD + Z275).
√ All structural elements and fixings are hot dip galvanized according to UNE-EN ISO
1461:2010.
√ The elements have a durable galvanized as established in the UNE-EN ISO 14713:2011,
depending on the type of environment to which they are exposed.
√ In these structures the connections between all elements are bolted, not welded existing
before or after the finishing process.
√ Including all hardware and fasteners. The hardware is stainless steel quality A2, metric M8-
M10-M12-M16.
√ Ease and speed of assembly due to the simplicity their components and joints because it
does not required welding on site.
√ The enclosures can be flexible (plastic film) or rigid (PVC, polycarbonate, etc).
√ All models can incorporate a ventilation system on deck.
CERTIFICATES
Our production facilities have been prepared in accordance with the provisions of the
Guidelines:
√ ISO 9001:2008, in terms of Quality Management Systems..
√ ISO 14001:2004, in terms of Environmental Management System.
√ OHSAS 18001:2007, in terms of Occupational Health and Safety Management
Systems.
30. The specifications and technical data may be subject to possible modifications without notice. 30/32
SERVICES
Solar Innova is constituted by a team of highly qualified and specialized in renewable
energy commitment to the implementation of clean energy to enable sustainable growth and a
better future for all, not forgetting the fair return on its investors and customers.
The main advantage that report Solar Innova services comes from its professional and
specialized management, which allows obtaining higher and safer returns, reducing risks,
optimizing and streamlining processes and, above all, avoiding hassles and concerns to their
clients. Have the same advantage, any company or person with a small investment, you will
have access to investments in renewable energy, inexhaustible and clean.
Solar Innova, born with the firm purpose of contributing to a more sustainable future.
Energy saving is the first way to combat the changes that are happening on our planet.
Alternative energy, now fully consolidated as a viable way to preserve the environment,
is the only solution for eliminating pollution and CO2.
The world needs systems based on solar power with improved quality and efficiency. This
is the definitive answer to a paradigm shift cleaner energy, sustainable and economically.
Besides thinking about how to produce clean energy, we must learn to make rational use
of energy as a priority.
Full customer satisfaction is our commitment, and he devoted one hundred percent of
our time and effort. We monitor daily performance and quality in products and services.
We have a rigorous internal quality control in order to offer the customer the best
service.
31. The specifications and technical data may be subject to possible modifications without notice. 31/32
DEALERS
We want to make sure your solar experience is fully satisfactory. This is why we have
selected highly skilled dealers and installers around the world. Our Official Dealers and
Installers will provide you with a professional installation job and a high-level customer
service.
Consistent with our commitment of pushing forward existing quality requirements, we
have drafted a Quality Charter for dealers and installers, that defines a series of rules aimed at
guaranteeing the best quality of service to homeowners choosing Solar Innova products.
Having signed our Quality Charter, Official Dealers and Installers prove to share the same
vision of quality as us, and take responsibility for providing their clients with a better service.
Our Official Dealers and Installers have gone one step further, formalized by the
signature of Solar Innova Letter of Commitment. Having your Solar Innova products installed
by an Official Installer, you can enjoy the benefits of your home photovoltaic system with
absolute peace of mind.
We want solar energy to be recognized as a prime choice for the generation of
electricity and we believe the satisfaction of each and every of our customers is the best way
to reach this goal.
32. The specifications and technical data may be subject to possible modifications without notice. 32/32
INTERNATIONAL OFFICES
EUROPE
SPAIN
Paseo de los Molinos, 12-Bajo
03660 – NOVELDA
Alicante
T: +34 965075767
F: +34 965075767
info@solarinnova.net
