Moody sistema internacional
•
1 like•1,180 views
This document contains a Moody diagram which is used to determine the friction factor for fluid flow in pipes. It shows the relationship between friction factor, Reynolds number, and relative roughness. The diagram includes equations for laminar flow, critical zone, and turbulent flow in rough and smooth pipes. It also provides kinematic viscosity values for water and air at 20°C.
Report
Share
Report
Share
Download to read offline
Recommended
mecánica de fluidos
This document contains calculations involving trigonometric functions, areas of geometric shapes, forces, accelerations, and densities. Various values are calculated and labeled with physical quantities like lengths, masses, times, densities. Diagrams or figures are not present but could help explain the context of some calculations.
Fluid dynamics
This document provides an introduction to fluid mechanics. It discusses how fluids are essential to life and have shaped history. It then provides brief biographies of some important figures in the history of fluid mechanics, such as Archimedes, Newton, Euler, Stokes, and Reynolds. It also discusses the significance of fluid mechanics across many fields including weather, vehicles, physiology, sports, and engineering. The document concludes by outlining the key components of analytical fluid dynamics, experimental fluid dynamics, and computational fluid dynamics.
Hidráulica
Este documento presenta los apuntes originales del Dr. Jesús Alberto Rodríguez Castro sobre hidráulica básica, adaptados y complementados por Guillermo Benjamín Pérez Morales. El documento define hidráulica como la rama de la ingeniería civil que estudia los problemas relacionados con el uso y manejo de fluidos, principalmente el agua. Explica conceptos básicos como las propiedades de los fluidos, incluyendo densidad, peso específico y viscosidad. También presenta conceptos fundamentales de física como fuerza de graved
Design and experimental analysis of pipe in pipe heat exchanger
Pipe in pipe heat exchanger are used in industrial process to recover heat between two
process fluids. The project carried out design of pipe in pipe heat exchanger having tube with fin and
without fin. The fins were taken in the form of semi-circular type arranged in altenating way with
spacing of 50mm.The fins were only provided on the inner tube for creating turbulence of cold water.
The number of fin were 18 and its height and thickness 10 and 1.6mm respectively. Experiment were
performed for heat exchanger with fins and without fins. The experiment were performed for different
flow rates of hot and cold fluid Different parameters like Overall heat transfer,Nusselt
number,Convective heat transfer coefficient,Pressure drop,friction factor were obtained and compared
for simple inner tube and finned tube.
moody.pdf
This document contains information about pipe flow, including equations for calculating the Reynolds number, Darcy-Weisbach friction factor, and relationships between these values in various flow regimes. Tables show representative values for relative roughness, kinematic viscosity, and gravitational acceleration for different materials, fluids, and latitudes. Diagrams map the Reynolds number and relative roughness to identify laminar or turbulent flow and appropriate equations for calculating friction factors.
Solution manual for water resources engineering 3rd edition - david a. chin
Solution Manual for Water-Resources Engineering - 3rd Edition
Author(s) : David A. Chin
This solution manual include all problems (Chapters 1 to 17) of textbook. in second section of solution manual, Problems answered using mathcad software .
MOSFET Model PSpice vs. Micro-Cap using TOSHIBA MOSFET
This document compares MOSFET models in Micro-Cap and PSpice simulation software. It includes SPICE netlists for a standard MOSFET model and compares characteristics such as Vgs-Id, Rds(on), gate charge, switching time, output characteristics, and body diode forward current between the two simulators. Minor parameter differences are noted between the Micro-Cap and PSpice models.
Solutions manual for microelectronic circuits analysis and design 3rd edition...
Solutions Manual for Microelectronic Circuits Analysis and Design 3rd Edition by Rashid IBSN 9781305635166
Download at: https://goo.gl/ShMdzK
People also search:
microelectronic circuits analysis and design rashid pdf
microelectronics circuit analysis and design 3rd edition pdf
microelectronic circuits analysis and design pdf
microelectronic circuits analysis and design rashid solution manual
electronic circuit analysis and design
Recommended
mecánica de fluidos
This document contains calculations involving trigonometric functions, areas of geometric shapes, forces, accelerations, and densities. Various values are calculated and labeled with physical quantities like lengths, masses, times, densities. Diagrams or figures are not present but could help explain the context of some calculations.
Fluid dynamics
This document provides an introduction to fluid mechanics. It discusses how fluids are essential to life and have shaped history. It then provides brief biographies of some important figures in the history of fluid mechanics, such as Archimedes, Newton, Euler, Stokes, and Reynolds. It also discusses the significance of fluid mechanics across many fields including weather, vehicles, physiology, sports, and engineering. The document concludes by outlining the key components of analytical fluid dynamics, experimental fluid dynamics, and computational fluid dynamics.
Hidráulica
Este documento presenta los apuntes originales del Dr. Jesús Alberto Rodríguez Castro sobre hidráulica básica, adaptados y complementados por Guillermo Benjamín Pérez Morales. El documento define hidráulica como la rama de la ingeniería civil que estudia los problemas relacionados con el uso y manejo de fluidos, principalmente el agua. Explica conceptos básicos como las propiedades de los fluidos, incluyendo densidad, peso específico y viscosidad. También presenta conceptos fundamentales de física como fuerza de graved
Design and experimental analysis of pipe in pipe heat exchanger
Pipe in pipe heat exchanger are used in industrial process to recover heat between two
process fluids. The project carried out design of pipe in pipe heat exchanger having tube with fin and
without fin. The fins were taken in the form of semi-circular type arranged in altenating way with
spacing of 50mm.The fins were only provided on the inner tube for creating turbulence of cold water.
The number of fin were 18 and its height and thickness 10 and 1.6mm respectively. Experiment were
performed for heat exchanger with fins and without fins. The experiment were performed for different
flow rates of hot and cold fluid Different parameters like Overall heat transfer,Nusselt
number,Convective heat transfer coefficient,Pressure drop,friction factor were obtained and compared
for simple inner tube and finned tube.
moody.pdf
This document contains information about pipe flow, including equations for calculating the Reynolds number, Darcy-Weisbach friction factor, and relationships between these values in various flow regimes. Tables show representative values for relative roughness, kinematic viscosity, and gravitational acceleration for different materials, fluids, and latitudes. Diagrams map the Reynolds number and relative roughness to identify laminar or turbulent flow and appropriate equations for calculating friction factors.
Solution manual for water resources engineering 3rd edition - david a. chin
Solution Manual for Water-Resources Engineering - 3rd Edition
Author(s) : David A. Chin
This solution manual include all problems (Chapters 1 to 17) of textbook. in second section of solution manual, Problems answered using mathcad software .
MOSFET Model PSpice vs. Micro-Cap using TOSHIBA MOSFET
This document compares MOSFET models in Micro-Cap and PSpice simulation software. It includes SPICE netlists for a standard MOSFET model and compares characteristics such as Vgs-Id, Rds(on), gate charge, switching time, output characteristics, and body diode forward current between the two simulators. Minor parameter differences are noted between the Micro-Cap and PSpice models.
Solutions manual for microelectronic circuits analysis and design 3rd edition...
Solutions Manual for Microelectronic Circuits Analysis and Design 3rd Edition by Rashid IBSN 9781305635166
Download at: https://goo.gl/ShMdzK
People also search:
microelectronic circuits analysis and design rashid pdf
microelectronics circuit analysis and design 3rd edition pdf
microelectronic circuits analysis and design pdf
microelectronic circuits analysis and design rashid solution manual
electronic circuit analysis and design
Quishpe mireya practica6
This document describes an experiment conducted to determine pressure losses in pipes and fittings. It provides objectives, equations, technical data, theoretical background, and test results. The specific objectives were to determine variation in friction factor for straight pipes, the relationship between total head loss and flow rate for fittings, and loss coefficients for each fitting. Tables show pressure loss data and calculations of friction factor, head losses in elbows, expansions/contractions, and loss coefficients for valves and fittings.
Plaxis Report.pdf
The document describes soil parameters and material properties for different soil types used in a PLAXIS simulation model. It includes properties like unit weight, drainage type, elasticity parameters, strength parameters, and permeability for materials including alluvial soil, riprap, backfill, and bedrock. The document also lists results sections for outputs like displacements, stresses, pore pressures, and seepage flows for different phases of the simulation like initial equilibrium, rapid drawdown, and pseudo-static analyses.
Chapter 16 solutions
This document provides calculations for determining braking forces and torques in a drum brake system. It gives equations and applies them to example problems, providing values for forces, pressures, and torques. In one example, a maximum pressure of 734.5 kPa is found on the right shoe for clockwise rotation. The total braking torque is calculated to be 422 N-m. In another example, a braking capacity of 1750 N-m is determined.
Resistencias en Serie y en Paralelo
This document describes a circuit analysis project involving a supernode circuit with 30 resistances. The objective is to optimally determine the current and voltage measurements in the circuit. The circuit diagram and resistance values are provided. Nodal analysis is used to derive a system of equations to solve for the node voltages. The calculated voltages are then used to determine the current and voltage drop across each individual resistance. The theoretical calculations are compared to simulated and measured values.
Reciprocal symmetry plots in Countercurrent Chromatography
This document provides instructions for representing chromatographic data using reciprocal symmetry (ReS) and reciprocal symmetry scaling (ReSS). It explains how to calculate partition coefficients (K) from chromatograms and plot the data in ReS or ReSS format. Guidelines are given for selecting the midline position and adjusting the x-axis to fit the data appropriately. Examples show how these techniques can be used to compare chromatographic methods and solvent systems.
SIBA Fuses DC Traction Fuses - Rail Industry Fuse Links
SIBA URDC DC fuses are available for use on traction, battery and railway circuit applications - traction fuses are designed for heavy duty circuit protection to following standards UIC550, IEC60269 and VDE 0636-40.
HTE Size 2512 1206 - 090721.pdf
This document provides specifications for HTE series low ohm power resistors from HTR India. It describes 14 resistor models in sizes 2512 and 1206 with power ratings from 1.5W to 6W and resistance values from 0.3 to 10 mohm. The document specifies parameters like tolerance, dimensions, temperature coefficient, derating curves and packaging/ordering information.
Original MOSFET N-CHANNEL FDPF7N50F 7N50 TO-220 7A 500V New
Original MOSFET N-CHANNEL FDPF7N50F 7N50 TO-220 7A 500V New
https://authelectronic.com/original-mosfet-n-channel-fdpf7n50f-7n50-to-220-7a-500v-new
Dev1insulating solid liquid 2
This document summarizes the key points from a homework assignment on insulating materials. It includes two main problems:
1) Computations related to water content and breakdown voltage in transformer insulation materials. The diffusion of water between cellulose paper and insulating oil is analyzed.
2) Analysis of partial discharges in a solid dielectric with two cavities, including derivation of the equivalent circuit model, calculation of cavity capacitances and voltages required to initiate partial discharges.
HTE
This document provides specifications for HTE series low ohm power resistors. It describes 14 resistor models in the 2512 and 1206 sizes with power ratings from 1.5W to 4W and resistance values from 0.3mOhm to 10mOhm. Key parameters specified include tolerance, temperature coefficient, derating curves, testing requirements, packaging and shelf life. The resistors are qualified for applications such as current sensing, automotive systems, and power modules.
Hte
This document provides specifications for HTE series low ohm power resistors. It describes 14 resistor models in the series with part numbers like R0003 and R0005. The resistors have power ratings from 1.5W to 4W at temperatures from 70C to 100C, tolerances from ±0.25% to ±5%, and resistance values from 0.3 to 10 mohm. The document provides details on dimensions, derating curves, testing standards, packaging, and other specifications.
Lc1 d
1) The document provides specifications for TeSys contactors and reversing contactors for various applications and power ratings.
2) It includes information on rated operational current and voltage, number of poles, rated operational power, auxiliary contacts, thermal overload relays, suppressor modules, interfaces and contactor/reversing contactor type references.
3) The contactors and reversing contactors can be used for applications such as industrial control systems, building automation systems, and other control system applications. They provide operational power ratings from 1.5kW to 900kW at voltages ranging from 220V to 690V.
VIZAG Steel
Vizag Steel has implemented extensive water conservation and recycling measures to reduce water consumption. Total water recycling is over 155,494 cubic meters per hour with make-up water needs of only 3,750 cubic meters per hour. Various projects have been implemented since 2004 to reduce water usage, such as recycling blowdown water, installing ultra filters, repairing pipelines, and modifying cooling systems. These projects have resulted in annual water savings of over 4 million cubic meters and costs recovered in under 3 years. Vizag Steel's specific water consumption of 2.33 cubic meters per ton of liquid steel is lower than other major steel producers. Further schemes are planned to achieve zero discharge of water.
Htr india-products-current-sense-resistors-electron-beam-welded-hre-english.pdf
This document provides information on low ohm power resistors made by HTR India. It describes the physical and electrical specifications including power ratings at different temperatures, resistance values, dimensions, tolerances and other parameters. It also includes application examples, features, recommended layout, testing characteristics and packaging details.
Htr india-products-current-sense-resistors-electron-beam-welded-heb-english
This document provides information on low ohm battery shunt resistors made by HTR. It includes specifications for 20 different resistor models varying in size, power rating, and resistance value between 0.000035 ohms and 0.002 ohms. The document discusses the physical and electrical characteristics including temperature range, tolerance, life testing results, and derating curves. It also provides packaging and ordering information.
Cálculos 2
1. The document describes an experimental procedure to study chlorine removal using an electrochemical reactor. Materials and equipment included electrodes, pipettes, beakers, a power source, and a spectrophotometer.
2. The procedure involved assembling the equipment, adding an electrolyte solution to the reactor, applying a voltage of 9.2V and current of 0.45A for 15 minutes, sampling solutions over time and measuring chlorine concentration.
3. Calculations were shown to determine the initial chlorine concentration, electrode surface area, average mass transfer coefficient, conversion rate, and current efficiency. Results showed a chlorine concentration of 9000 mg/L, electrode area of 0.01212 m2
Htr india-products-current-sense-resistors-electron-beam-welded-heb-english.pdf
This document provides specifications for low ohm battery shunt resistors produced by HTR in various sizes and resistance values:
- The resistors are open frame designs made of FeCrAl or manganin and can dissipate power continuously up to specified temperatures.
- Dimensions, electrical characteristics like tolerance and temperature coefficient, and derating curves are provided for each resistor size in tables and charts.
- The resistors can be used for current sensing in applications like electric vehicles and solar inverters.
Htr india-products-current-sense-resistors-electron-beam-welded-hte-english
This document provides specifications for HTE series low ohm power resistors. It includes details on construction, ratings, dimensions, tolerances, and performance characteristics. The resistors are available in 2512 and 1206 sizes with resistance values from 0.3-4 milliohms and power ratings from 1-6 watts depending on the model. Tables provide information on each model number including resistance, tolerance, dimensions, and other parameters.
The Rheological and Empirical Characteristics of Steel Fibre Reinforced Self-...
Investigating whether a correlation exists between rheology and empiricism for various steel fibre self-compacting concrete mixtures with additional cementitious additions (such as PFA and GGBS).
HRE
This document provides information on low ohm power resistors made by HTR. It describes the physical and electrical specifications including power ratings from 2W to 12W, resistance values from R0002 to R005, tolerances from ±0.25% to ±5%, and dimensions. It also provides recommended solder profiles, environmental test results, derating curves, packaging and ordering information.
Unit -II Spectroscopy - EC I B.Tech.pdf
Chemical engineering and electronics engineering and chemical development of the day of the almighty paw paw paw
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
More Related Content
Similar to Moody sistema internacional
Quishpe mireya practica6
This document describes an experiment conducted to determine pressure losses in pipes and fittings. It provides objectives, equations, technical data, theoretical background, and test results. The specific objectives were to determine variation in friction factor for straight pipes, the relationship between total head loss and flow rate for fittings, and loss coefficients for each fitting. Tables show pressure loss data and calculations of friction factor, head losses in elbows, expansions/contractions, and loss coefficients for valves and fittings.
Plaxis Report.pdf
The document describes soil parameters and material properties for different soil types used in a PLAXIS simulation model. It includes properties like unit weight, drainage type, elasticity parameters, strength parameters, and permeability for materials including alluvial soil, riprap, backfill, and bedrock. The document also lists results sections for outputs like displacements, stresses, pore pressures, and seepage flows for different phases of the simulation like initial equilibrium, rapid drawdown, and pseudo-static analyses.
Chapter 16 solutions
This document provides calculations for determining braking forces and torques in a drum brake system. It gives equations and applies them to example problems, providing values for forces, pressures, and torques. In one example, a maximum pressure of 734.5 kPa is found on the right shoe for clockwise rotation. The total braking torque is calculated to be 422 N-m. In another example, a braking capacity of 1750 N-m is determined.
Resistencias en Serie y en Paralelo
This document describes a circuit analysis project involving a supernode circuit with 30 resistances. The objective is to optimally determine the current and voltage measurements in the circuit. The circuit diagram and resistance values are provided. Nodal analysis is used to derive a system of equations to solve for the node voltages. The calculated voltages are then used to determine the current and voltage drop across each individual resistance. The theoretical calculations are compared to simulated and measured values.
Reciprocal symmetry plots in Countercurrent Chromatography
This document provides instructions for representing chromatographic data using reciprocal symmetry (ReS) and reciprocal symmetry scaling (ReSS). It explains how to calculate partition coefficients (K) from chromatograms and plot the data in ReS or ReSS format. Guidelines are given for selecting the midline position and adjusting the x-axis to fit the data appropriately. Examples show how these techniques can be used to compare chromatographic methods and solvent systems.
SIBA Fuses DC Traction Fuses - Rail Industry Fuse Links
SIBA URDC DC fuses are available for use on traction, battery and railway circuit applications - traction fuses are designed for heavy duty circuit protection to following standards UIC550, IEC60269 and VDE 0636-40.
HTE Size 2512 1206 - 090721.pdf
This document provides specifications for HTE series low ohm power resistors from HTR India. It describes 14 resistor models in sizes 2512 and 1206 with power ratings from 1.5W to 6W and resistance values from 0.3 to 10 mohm. The document specifies parameters like tolerance, dimensions, temperature coefficient, derating curves and packaging/ordering information.
Original MOSFET N-CHANNEL FDPF7N50F 7N50 TO-220 7A 500V New
Original MOSFET N-CHANNEL FDPF7N50F 7N50 TO-220 7A 500V New
https://authelectronic.com/original-mosfet-n-channel-fdpf7n50f-7n50-to-220-7a-500v-new
Dev1insulating solid liquid 2
This document summarizes the key points from a homework assignment on insulating materials. It includes two main problems:
1) Computations related to water content and breakdown voltage in transformer insulation materials. The diffusion of water between cellulose paper and insulating oil is analyzed.
2) Analysis of partial discharges in a solid dielectric with two cavities, including derivation of the equivalent circuit model, calculation of cavity capacitances and voltages required to initiate partial discharges.
HTE
This document provides specifications for HTE series low ohm power resistors. It describes 14 resistor models in the 2512 and 1206 sizes with power ratings from 1.5W to 4W and resistance values from 0.3mOhm to 10mOhm. Key parameters specified include tolerance, temperature coefficient, derating curves, testing requirements, packaging and shelf life. The resistors are qualified for applications such as current sensing, automotive systems, and power modules.
Hte
This document provides specifications for HTE series low ohm power resistors. It describes 14 resistor models in the series with part numbers like R0003 and R0005. The resistors have power ratings from 1.5W to 4W at temperatures from 70C to 100C, tolerances from ±0.25% to ±5%, and resistance values from 0.3 to 10 mohm. The document provides details on dimensions, derating curves, testing standards, packaging, and other specifications.
Lc1 d
1) The document provides specifications for TeSys contactors and reversing contactors for various applications and power ratings.
2) It includes information on rated operational current and voltage, number of poles, rated operational power, auxiliary contacts, thermal overload relays, suppressor modules, interfaces and contactor/reversing contactor type references.
3) The contactors and reversing contactors can be used for applications such as industrial control systems, building automation systems, and other control system applications. They provide operational power ratings from 1.5kW to 900kW at voltages ranging from 220V to 690V.
VIZAG Steel
Vizag Steel has implemented extensive water conservation and recycling measures to reduce water consumption. Total water recycling is over 155,494 cubic meters per hour with make-up water needs of only 3,750 cubic meters per hour. Various projects have been implemented since 2004 to reduce water usage, such as recycling blowdown water, installing ultra filters, repairing pipelines, and modifying cooling systems. These projects have resulted in annual water savings of over 4 million cubic meters and costs recovered in under 3 years. Vizag Steel's specific water consumption of 2.33 cubic meters per ton of liquid steel is lower than other major steel producers. Further schemes are planned to achieve zero discharge of water.
Htr india-products-current-sense-resistors-electron-beam-welded-hre-english.pdf
This document provides information on low ohm power resistors made by HTR India. It describes the physical and electrical specifications including power ratings at different temperatures, resistance values, dimensions, tolerances and other parameters. It also includes application examples, features, recommended layout, testing characteristics and packaging details.
Htr india-products-current-sense-resistors-electron-beam-welded-heb-english
This document provides information on low ohm battery shunt resistors made by HTR. It includes specifications for 20 different resistor models varying in size, power rating, and resistance value between 0.000035 ohms and 0.002 ohms. The document discusses the physical and electrical characteristics including temperature range, tolerance, life testing results, and derating curves. It also provides packaging and ordering information.
Cálculos 2
1. The document describes an experimental procedure to study chlorine removal using an electrochemical reactor. Materials and equipment included electrodes, pipettes, beakers, a power source, and a spectrophotometer.
2. The procedure involved assembling the equipment, adding an electrolyte solution to the reactor, applying a voltage of 9.2V and current of 0.45A for 15 minutes, sampling solutions over time and measuring chlorine concentration.
3. Calculations were shown to determine the initial chlorine concentration, electrode surface area, average mass transfer coefficient, conversion rate, and current efficiency. Results showed a chlorine concentration of 9000 mg/L, electrode area of 0.01212 m2
Htr india-products-current-sense-resistors-electron-beam-welded-heb-english.pdf
This document provides specifications for low ohm battery shunt resistors produced by HTR in various sizes and resistance values:
- The resistors are open frame designs made of FeCrAl or manganin and can dissipate power continuously up to specified temperatures.
- Dimensions, electrical characteristics like tolerance and temperature coefficient, and derating curves are provided for each resistor size in tables and charts.
- The resistors can be used for current sensing in applications like electric vehicles and solar inverters.
Htr india-products-current-sense-resistors-electron-beam-welded-hte-english
This document provides specifications for HTE series low ohm power resistors. It includes details on construction, ratings, dimensions, tolerances, and performance characteristics. The resistors are available in 2512 and 1206 sizes with resistance values from 0.3-4 milliohms and power ratings from 1-6 watts depending on the model. Tables provide information on each model number including resistance, tolerance, dimensions, and other parameters.
The Rheological and Empirical Characteristics of Steel Fibre Reinforced Self-...
Investigating whether a correlation exists between rheology and empiricism for various steel fibre self-compacting concrete mixtures with additional cementitious additions (such as PFA and GGBS).
HRE
This document provides information on low ohm power resistors made by HTR. It describes the physical and electrical specifications including power ratings from 2W to 12W, resistance values from R0002 to R005, tolerances from ±0.25% to ±5%, and dimensions. It also provides recommended solder profiles, environmental test results, derating curves, packaging and ordering information.
Similar to Moody sistema internacional (20)
Reciprocal symmetry plots in Countercurrent Chromatography
Reciprocal symmetry plots in Countercurrent Chromatography
SIBA Fuses DC Traction Fuses - Rail Industry Fuse Links
SIBA Fuses DC Traction Fuses - Rail Industry Fuse Links
Original MOSFET N-CHANNEL FDPF7N50F 7N50 TO-220 7A 500V New
Original MOSFET N-CHANNEL FDPF7N50F 7N50 TO-220 7A 500V New
Htr india-products-current-sense-resistors-electron-beam-welded-hre-english.pdf
Htr india-products-current-sense-resistors-electron-beam-welded-hre-english.pdf
Htr india-products-current-sense-resistors-electron-beam-welded-heb-english
Htr india-products-current-sense-resistors-electron-beam-welded-heb-english
Htr india-products-current-sense-resistors-electron-beam-welded-heb-english.pdf
Htr india-products-current-sense-resistors-electron-beam-welded-heb-english.pdf
Htr india-products-current-sense-resistors-electron-beam-welded-hte-english
Htr india-products-current-sense-resistors-electron-beam-welded-hte-english
The Rheological and Empirical Characteristics of Steel Fibre Reinforced Self-...
The Rheological and Empirical Characteristics of Steel Fibre Reinforced Self-...
Recently uploaded
Unit -II Spectroscopy - EC I B.Tech.pdf
Chemical engineering and electronics engineering and chemical development of the day of the almighty paw paw paw
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
FULL STACK PROGRAMMING - Both Front End and Back End
This ppt gives details about Full Stack Programming and its basics.
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
The need for ecofriendly materials as building materials in this century cannot be overemphasized
Accident detection system project report.pdf
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
一比一原版(USF毕业证)旧金山大学毕业证如何办理
原件一模一样【微信：95270640】【旧金山大学毕业证USF学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理旧金山大学毕业证USF学位证毕业证学位证【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
This study Examines the Effectiveness of Talent Procurement through the Imple...
In the world with high technology and fast
forward mindset recruiters are walking/showing interest
towards E-Recruitment. Present most of the HRs of
many companies are choosing E-Recruitment as the best
choice for recruitment. E-Recruitment is being done
through many online platforms like Linkedin, Naukri,
Instagram , Facebook etc. Now with high technology E-
Recruitment has gone through next level by using
Artificial Intelligence too.
Key Words : Talent Management, Talent Acquisition , E-
Recruitment , Artificial Intelligence Introduction
Effectiveness of Talent Acquisition through E-
Recruitment in this topic we will discuss about 4important
and interlinked topics which are
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
Levelised Cost of Hydrogen (LCOH) Calculator Manual
The aim of this manual is to explain the
methodology behind the Levelized Cost of
Hydrogen (LCOH) calculator. Moreover, this
manual also demonstrates how the calculator
can be used for estimating the expenses associated with hydrogen production in Europe
using low-temperature electrolysis considering different sources of electricity
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
The Network on Chip (NoC) has emerged as an effective
solution for intercommunication infrastructure within System on
Chip (SoC) designs, overcoming the limitations of traditional
methods that face significant bottlenecks. However, the complexity
of NoC design presents numerous challenges related to
performance metrics such as scalability, latency, power
consumption, and signal integrity. This project addresses the
issues within the router's memory unit and proposes an enhanced
memory structure. To achieve efficient data transfer, FIFO buffers
are implemented in distributed RAM and virtual channels for
FPGA-based NoC. The project introduces advanced FIFO-based
memory units within the NoC router, assessing their performance
in a Bi-directional NoC (Bi-NoC) configuration. The primary
objective is to reduce the router's workload while enhancing the
FIFO internal structure. To further improve data transfer speed,
a Bi-NoC with a self-configurable intercommunication channel is
suggested. Simulation and synthesis results demonstrate
guaranteed throughput, predictable latency, and equitable
network access, showing significant improvement over previous
designs
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
Recently uploaded (20)
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
FULL STACK PROGRAMMING - Both Front End and Back End
FULL STACK PROGRAMMING - Both Front End and Back End
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
This study Examines the Effectiveness of Talent Procurement through the Imple...
This study Examines the Effectiveness of Talent Procurement through the Imple...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
openshift technical overview - Flow of openshift containerisatoin
openshift technical overview - Flow of openshift containerisatoin
Levelised Cost of Hydrogen (LCOH) Calculator Manual
Levelised Cost of Hydrogen (LCOH) Calculator Manual
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
Moody sistema internacional
- 1. 3 10 VD for water at 20°C (V in m/s, D in cm) ® ¬ Transition zone ®¬ Complete turbulence, rough pipes, R > 3500/r, 1/Öf = 1.14 − 2 log r 4 10 5 10 6 10 7 10 0.07 0.06 0.05 0.045 0.04 0.035 0.03 0.025 0.02 0.0175 0.015 0.0125 0.01 0.008 0.006 0.004 0.003 0.002 0.0015 0.001 0.0008 0.0006 0.0004 0.0002 0.0001 5e−005 2e−005 8 10 −1 10 9 8 7 6 5.5 5 4.5 4 3.5 3 2.5 2 1.8 1.6 1.4 1.2 −2 10 9 8 6 7 8 2 3 4 5 6 7 8 2 3 4 5 6 7 8 2 3 4 5 6 7 8 2 3 4 5 6 7 8 2 3 4 5 6 7 8 1e−005 Laminar flow Critical zone VD n Reynolds number R Í ÄÄ (V in m/s, D in m, n in m 2/s) Darcy−Weisbach friction factor f Í ÄÄÄÄ 2hDg LV 2 Relative roughness r Í Äe (e in mm, D in mm) D Moody Diagram Metzger & Willard, Inc. http://www.metzgerwillard.com r = 5e−006 r = 1e−006 Smooth pipes, r = 0 1/Öf = 2 log(R Öf ) − 0.8 Hagen−Poisseuille equation R £ 2300, f = 64/R Colebrook equation, R ³ 2300 1/Öf = −2 log(r /3.7 + 2.51/(R Öf )) Continuity equation, Q = AV A = p D 2/4, V = 4Q /(p D 2) __ __ __ __ __ 0.06 | | 0.1 | 0.2 | 0.4 | 0.6 | 0.8 | 1| 2| 4| 6| 8| 10 | 20 | 40 | 60 | | 100 | 200 | 400 | 600 | | 1000 | 2000 | 4000 | 6000 | | 10000 ____________________________________________________________________________________________________________________________________________________________________________________________________| VD for atmospheric air at 20°C 1| 2| 4| 6| 8| 10 | 20 | 40 | 60 | | 100 | 200 | 400 | 600 | | 1000 | 2000 | 4000 | 6000 | | 10000 | 20000 | 40000 | 60000 | | 100000 | Material ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Riveted steel Concrete Wood stave Cast iron Galvanized iron Asphalted cast iron Commercial steel Drawn tubing e (mm) ÄÄÄÄÄÄÄÄÄ 0.9−9 0.3−3 0.18−0.9 0.25 0.15 0.12 0.046 0.0015 Fluid at 20°C ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Water Air (101.325 kPa) n (m2/s) ÄÄÄÄÄÄÄÄÄ 1.003e−006 1.511e−005 Latitude (WGS84) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Sea level Standard Sea level 0.0 45.5 90.0 ° ° ° g (m/s2) ÄÄÄÄÄÄÄÄÄ 9.78033 9.80665 9.83219