Modular Pod Structural Design
•Download as PPTX, PDF•
0 likes•164 views
A winning entry for the Young Structural International Design Competition (YSEIDC 2020) organized by Institute of Structural Engineers (IStructE). Presentation of design solution for building low cost sustainable structures in areas susceptible to floods and strong winds.
Report
Share
Report
Share
Recommended
Base in a box
Base In A Box offers complete and easily transportable expeditionary housing and life support packages for military, disaster relief, and humanitarian missions. Their solutions include housing, water purification, power generation, latrines, kitchens, trash disposal, and medical facilities, which can be scaled from small base camps up to 25-acre villages. Components are designed to be rapidly set up within 30 minutes by four people and are air-transportable.
Eng215 World Shelters
Engineering 215, Introduction to Design, at Humboldt State University partners with World Shelters 501(c)3 to bring improvements to the shelters and work with the resources in Haiti.
Washinton State University/Manchester Fuel Depot Senior Project
This document summarizes a project to renovate the support system for fuel pipelines at the Manchester Fuel Depot. The current nylon support system is failing with buckling pads, corrosion, and possible leaks. The proposed renovation would reduce the number of support monuments, use the existing monuments cut down to a lower height, and install a proven welded T-shoe support system. Analysis showed the modified monuments and new support system would meet safety factors and withstand stresses. The construction process is designed to take 37 days at an estimated cost under $179,000. In summary, the project aims to provide a 30+ year lifespan with reduced maintenance through replacing the failing support in a short timeline and at a lower
Seminar on Robotics in Construction
Modular construction involves prefabricating building sections off-site and transporting them for assembly. It offers several advantages over traditional construction including significantly reduced construction time, lower costs due to controlled factory conditions and simultaneous on-site/off-site work, and less waste. Modular buildings are built using wood or steel frames with walls, floors, and other components assembled indoors in sections and transported for cranes to piece together on foundations. Their strength and durability matches traditional buildings while providing environmental benefits like reduced materials use and easier deconstruction.
ASFPM 2016: Does Dry Floodproofing Work?
Adam Reeder co-presented "oes Dry Floodproofing Work?" at the 2016 Association of State Floodplain Managers conference.
Modular Buildings
Modular buildings consist of prefabricated rooms or sections that are constructed off-site and assembled on-site. They offer advantages like less waste, lower costs, safer construction, and shorter build times compared to conventional methods. The Dean 461 apartment building in Brooklyn is an example of a modular high-rise consisting of 32 stories and 363 pre-fab apartment blocks. While modular construction has advantages, it also has some disadvantages such as potential transport difficulties with large modules and an unconventional aesthetic.
Seminar on modular building
Modular construction involves prefabricating building sections off-site and assembling them on-site. This report discusses the advantages of modular buildings such as lower costs, faster construction, and reduced waste compared to traditional on-site building. Sections are constructed indoors in a factory setting using materials like wood and steel frames. Completed modules are transported to the construction site and assembled using cranes. The modular process allows buildings to be built quickly while controlling costs and minimizing weather delays.
Tunneling
This document provides an overview of the history, design, construction, and safety aspects of tunneling. It discusses key points such as:
- The history of tunnel construction dates back to ancient times but modern tunneling technology evolved from mining and military engineering.
- Tunnel planning requires considering geology, hydrology, ventilation, lighting, drainage, and safety systems such as emergency exits.
- India has increasingly developed tunneling for transportation and hydroelectric projects, with some of the largest examples being the Pir Panjal Railway Tunnel and underground water supply tunnels.
- Ensuring tunnel safety requires adequate width, ventilation, signage, and fire suppression systems. Lighting, electrical works, and drainage are also important design
Recommended
Base in a box
Base In A Box offers complete and easily transportable expeditionary housing and life support packages for military, disaster relief, and humanitarian missions. Their solutions include housing, water purification, power generation, latrines, kitchens, trash disposal, and medical facilities, which can be scaled from small base camps up to 25-acre villages. Components are designed to be rapidly set up within 30 minutes by four people and are air-transportable.
Eng215 World Shelters
Engineering 215, Introduction to Design, at Humboldt State University partners with World Shelters 501(c)3 to bring improvements to the shelters and work with the resources in Haiti.
Washinton State University/Manchester Fuel Depot Senior Project
This document summarizes a project to renovate the support system for fuel pipelines at the Manchester Fuel Depot. The current nylon support system is failing with buckling pads, corrosion, and possible leaks. The proposed renovation would reduce the number of support monuments, use the existing monuments cut down to a lower height, and install a proven welded T-shoe support system. Analysis showed the modified monuments and new support system would meet safety factors and withstand stresses. The construction process is designed to take 37 days at an estimated cost under $179,000. In summary, the project aims to provide a 30+ year lifespan with reduced maintenance through replacing the failing support in a short timeline and at a lower
Seminar on Robotics in Construction
Modular construction involves prefabricating building sections off-site and transporting them for assembly. It offers several advantages over traditional construction including significantly reduced construction time, lower costs due to controlled factory conditions and simultaneous on-site/off-site work, and less waste. Modular buildings are built using wood or steel frames with walls, floors, and other components assembled indoors in sections and transported for cranes to piece together on foundations. Their strength and durability matches traditional buildings while providing environmental benefits like reduced materials use and easier deconstruction.
ASFPM 2016: Does Dry Floodproofing Work?
Adam Reeder co-presented "oes Dry Floodproofing Work?" at the 2016 Association of State Floodplain Managers conference.
Modular Buildings
Modular buildings consist of prefabricated rooms or sections that are constructed off-site and assembled on-site. They offer advantages like less waste, lower costs, safer construction, and shorter build times compared to conventional methods. The Dean 461 apartment building in Brooklyn is an example of a modular high-rise consisting of 32 stories and 363 pre-fab apartment blocks. While modular construction has advantages, it also has some disadvantages such as potential transport difficulties with large modules and an unconventional aesthetic.
Seminar on modular building
Modular construction involves prefabricating building sections off-site and assembling them on-site. This report discusses the advantages of modular buildings such as lower costs, faster construction, and reduced waste compared to traditional on-site building. Sections are constructed indoors in a factory setting using materials like wood and steel frames. Completed modules are transported to the construction site and assembled using cranes. The modular process allows buildings to be built quickly while controlling costs and minimizing weather delays.
Tunneling
This document provides an overview of the history, design, construction, and safety aspects of tunneling. It discusses key points such as:
- The history of tunnel construction dates back to ancient times but modern tunneling technology evolved from mining and military engineering.
- Tunnel planning requires considering geology, hydrology, ventilation, lighting, drainage, and safety systems such as emergency exits.
- India has increasingly developed tunneling for transportation and hydroelectric projects, with some of the largest examples being the Pir Panjal Railway Tunnel and underground water supply tunnels.
- Ensuring tunnel safety requires adequate width, ventilation, signage, and fire suppression systems. Lighting, electrical works, and drainage are also important design
Modular Buildings
In this presentation, the technology of MODULAR BUILDINGS has been discussed along with its Uses, Construction Process, Manufacturing Process, Design Considerations, Zoning Considerations, Strength Considerations, Advantages and Disadvantages.
Piloting rainwater harvesting for MUS in Dire Dawa, Ethiopia
Presentation sharing the lessons on piloting rain water harvesting for MUS in Dire Dawa, Ethiopia. By Sean Patrick, RAIN Foundation. Presentation during the Seminar on Multiple Use Water Services in the context of Dutch policy and practice. Wednesday 26 June 2013, The Hague, The Netherlands.
UMAID IQBAL SEMINAR.pptx
This document summarizes a seminar presentation on box pushing technology. Box pushing technology involves prefabricating concrete box segments and pushing them underground using hydraulic jacks to form tunnels, culverts, and other underground structures with minimal excavation. The presentation covers the objectives of box pushing, key components of the process, construction steps, advantages over conventional excavation methods, safety measures, environmental benefits, and future trends in the technology. Box pushing allows for faster, less disruptive, and more cost-effective construction of underground infrastructure compared to traditional excavation methods.
Ct3 presentation slides
This document discusses blockwork construction and provides details on the manufacturing process and uses of concrete blocks. It describes how concrete blocks are made by mixing raw materials like cement, sand and gravel, then molding and curing the blocks. Examples are given of common block types and their compositions. The document also provides a case study on the use of blockwork in constructing a secondary school in Malaysia and residential buildings in India.
Latest ct3
This document discusses blockwork construction and provides details on the manufacturing process and uses of concrete blocks. It describes how concrete blocks are made by mixing raw materials like cement, sand and gravel, then molding and curing the blocks. Examples are given of common block types and their compositions. The document also provides a case study on the use of blockwork in constructing a secondary school in Malaysia and residential buildings in India.
Alternate Building Materials,Alternative Construction Technology and Rain Wat...
The Core of any construction project is its design and at basic level is the materials used.
During the first phase of civilization we used the raw material such as leaves, branches and animal hides for the construction but with increase in our intellect we started improvising other materials such as stone, clay and timber.
With growing time we developed other materials such as brick and concrete, these materials went under great change and stayed till date from the starting of Egyptian civilisation to the present one.
The sudden change in the palate for construction was marked by the INDUSTRIAL REVOLUTION giving birth to various materials such as metals, glass and steel. It gave rise to many new technologies.
After the industrial revolution many materials had come up over these years. Such as PVC and plastics , many types of concrete like ferrocrete & precast, GRF etc. even now lot of researches are going on new materials and about increasing the efficiency of earlier one.
Concrete homes intl_english_20130130(1)
Western Forms provides aluminum forming systems for cast-in-place concrete construction. Their systems allow builders to construct concrete homes, apartments, and other structures quickly and affordably. Their lightweight, modular forms can be used to construct exterior walls, interior walls, floors, and other elements. Builders can reportedly construct an entire house in a single day using Western Forms systems. The systems have been used on projects in over 40 countries.
Lecture_all.pdf
The document provides information on building construction steps including specifying the project target, preparing project requirements, engineering design, and project execution. It discusses types of buildings classified by execution method (site execution vs. precast/prefabricated) and construction design (frame, bearing wall, and frame & bearing wall buildings). The document also covers building construction development factors like good design, suitable materials, execution, and quality control.
T e m p o r a r y s t r u c t u r e s 2 1
The document discusses different types of temporary structures. It begins with introducing temporary structures and defining them. It then discusses the history of temporary structures dating back 44,000 years. Some key early temporary structures discussed include tipis and yurts. The document then covers classifications of temporary structures according to their basic functions and structural behavior. It identifies and describes different types of temporary structures including membrane structures like tents, pneumatic structures, net structures, shell structures, space frame structures, geodesic domes, folded plate structures, and bamboo structures. The document provides examples and diagrams to illustrate these different temporary structure types.
Introduction to Underground Structures _ Building Structures
Underground infrastructure refers to any physical infrastructure that is placed beneath the surface.
The space created below the ground surface. Underground space is available almost everywhere, which may provide the
site for activities or infrastructure that are difficult or impossible to install aboveground
or whose presence aboveground is unacceptable or undesirable. Another
fundamental characteristic of underground space lies in the natural protection
it offers to whatever is placed underground. This protection is simultaneously
mechanical, thermal, acoustic, and hydraulic (i.e., watertight). It is effective
not only in relation to the surface, but also within the underground space itself.
Thus underground infrastructure offers great safety against all natural disasters
and nuclear wars, ultraviolet rays from holes in the ozone layer, global warming,
electromagnetic pollution, and massive solar storms. Increasing population and the developing needs and aspirations of humankind
for our living environment require increasing provision of space of all
kinds. This has become a high priority for most “mega cities” since the closing
years of the 20th century. The world’s population is becoming more urbanized,
at an unprecedented pace.
In different countries, various facilities have been built underground. These
facilities include:
● Underground parking space
● Rail and road tunnels
● Sewage treatment plants
● Garbage incineration plants
● Underground mass rapid transport systems, popularly known as “underground
metro”
● Underground oil storage and supply systems (through pipelines in tunnels)
● Underground cold storage
● Hydroelectric projects with extensive use of underground caverns and
tunnels
In the primitive ages, beginning roughly three million years ago, from the time
human beings first existed on earth to the Neolithic age of approximately 3000
B.C., underground space was used in the form of cave dwellings so that people
could protect themselves from the threats posed by natural (primarily climatic)
hazards. The world’s biggest cave is 207 m high and 152 m wide in a Vietnam
forest. This Hang Son Doong cave is larger than the Dear cave in Sarawak,
Malaysia, which is more than 100 m high and 90 m wide. Following this period,
in ancient times from roughly 3000 B.C. to A.D. 500, which spanned the civilizations
of Egypt, Mesopotamia, Greece, and Rome, technology employed in
the construction of tunnels progressed considerably.
The earliest examples of underground structures in India were in the form of
dwelling pits cut into the compacted loess deposits in Kashmir around 3000 and
500 B.C. This was brought to light by the Archaeological Survey of India (ASI)
during excavations in 1960. These pit houses were found to provide excellent protection
against cold and severe winter weather as well as the heat of summer. They
also offered protection against external attack. Dwellings dating back to 1600 B.C.
were also noted at Nagarjuna Konda in Andhra
Emergency shelter System Design by Shirish Avrani
The document describes the design of an emergency shelter system for earthquake victims in Kutch, India. The shelter was designed to be (1) made from locally available and reusable materials like steel pipes and corrugated sheets, (2) modular for fast construction through a do-it-yourself approach, and (3) able to be incrementally upgraded over time as needs change. The proposed design uses steel pipe cots as modular units that can be assembled into different shelter configurations and easily transported, constructed, reused, or dismantled. A demonstration shelter was successfully constructed using this system to house earthquake victims.
B.con 2 report
The document outlines the design and construction of a 1:5 scale model of a temporary bus shelter. It describes the initial design process which included ideas inspired by a clothes drying rack. The final design features a butterfly roof structure supported by timber columns. Detailed construction steps are provided, including how the floor, walls, roof and other elements are connected through various joints like lap joints and L-shaped brackets. The project aimed to demonstrate understanding of building construction techniques.
Mod. 1.pptx
This document outlines the details of a course on Advanced Construction Technology. The course aims to teach students the latest construction techniques applied to substructure and superstructure. It covers 6 modules that will provide knowledge on techniques like box jacking, pipe jacking, ground improvement methods, dredging systems, and rehabilitation/strengthening techniques. On completing the course, students will gain expertise in evaluating construction procedures, understanding various construction stages, and applying new construction technologies to special structures.
Modular building seminar REPORT 1
Modular buildings are constructed of prefabricated components made in a factory that are then assembled on-site. They offer advantages of faster construction at lower costs compared to traditional on-site building. Modular buildings can be used for both temporary and permanent structures and come in a range of sizes from small single units to large multi-building campuses. They are built to the same codes and standards as traditional buildings and have equivalent durability and lifespan.
CT III IBS Formwork System
This document discusses tunnel formwork construction and provides details about a group project on the topic. It begins with an introduction to Industrialized Building Systems (IBS) and focuses on tunnel formwork. The construction process is described along with advantages like quality, speed, cost savings and disadvantages such as initial costs. Two case studies are presented: a 44-story residential building in Atlanta used tunnel forms to complete a floor every 3 days and a residential project in India that used tunnel forms to construct 25 towers efficiently.
PREFABRICATED CONSTRUCTION
Prefabricated structures, also known as prefab structures, offer several benefits across various sectors. Some of the key advantages include:
Speed of Construction: Prefabricated structures are built off-site in a controlled environment concurrently with site preparation, significantly reducing construction time. Once on-site, assembly is quicker compared to traditional construction methods, saving time and resources.
Cost-Effectiveness: Prefab structures often result in cost savings due to efficient material usage, reduced labor expenses, and minimized construction waste. Additionally, economies of scale in manufacturing contribute to lower overall project costs.
Quality Control: Manufacturing prefabricated components in a factory setting allows for stringent quality control measures. This results in higher-quality products with consistent standards, as factors such as weather conditions and on-site variables are mitigated.
Design Flexibility: Prefabricated structures offer versatile design options to meet diverse architectural and functional requirements. Modular components can be customized, combined, or replicated to create tailored solutions for various applications.
Environmental Sustainability: Prefabrication reduces environmental impact by optimizing material usage, minimizing waste generation, and often incorporating sustainable materials. Additionally, the controlled manufacturing process can enhance energy efficiency and reduce carbon emissions.
Improved Safety: Prefabrication can enhance on-site safety by reducing the need for labor-intensive tasks and minimizing exposure to hazardous conditions. The controlled environment of factory production also reduces the risk of accidents compared to traditional construction sites.
Adaptability and Scalability: Prefabricated structures are inherently adaptable and scalable, allowing for easy modification, expansion, or relocation as needs evolve. This flexibility makes them suitable for a wide range of applications, including temporary and permanent structures.
Predictability and Consistency: Prefabricated construction offers greater predictability in project timelines and outcomes. With standardized components and assembly processes, there is reduced variability, resulting in more reliable project delivery.
Overall, the benefits of prefabricated structures make them a compelling choice for various construction projects, offering efficiency, cost savings, quality assurance, and sustainability advantages.
UCEN SRP PROJECT.pptx
This document discusses the design of a fire protection system for the University College of Engineering (UCEN) building using AutoCAD. It outlines the advantages of designing fire protection systems in AutoCAD, including minimizing errors compared to manual drafting. It then discusses common fire-resistant construction materials and firefighting equipment like sprinklers and extinguishers. The document details how the UCEN building will be modeled in AutoCAD, including placing sprinklers in labs and extinguishers every 30 meters. Implementing this fire protection system will help protect lives and property in case of a fire.
Optimizing and Saving WATER in achieving Green Construction
- Water conservation is important as only 3% of the world's water is potable and available for drinking. Construction activities currently consume significant amounts of water.
- Sustainable construction focuses on reducing water usage through efficient designs, materials selection, rainwater harvesting, and wastewater recycling. Techniques presented included using local materials, reducing cement/steel, harvesting rainwater, installing efficient fittings, and treating wastewater on-site.
- A national innovation week is being organized in India to encourage schools to calculate their water usage and carbon footprint to increase awareness around efficient water usage and sustainability.
Marina barrage (09/10s2)
The document outlines the design and construction of the Marina Barrage in Singapore. It was built across the Marina Channel to create a reservoir and address flooding issues. Some key points:
- It serves as a water supply source, provides flood control, and is a lifestyle attraction.
- Nine crest gates were installed to block seawater. Over 850 piles support the barrage structure.
- Environmental features include a green roof, solar panels, and sustainable materials and technologies.
- The interior design maximizes natural light, ventilation and reuse of materials to reduce energy usage.
Louisiana coastal master plan
In this deck from the HPC User Forum, Zachary Cobell from ARCADIS-US presents: High Performance Computing for the Louisiana Coastal Master Plan.
Watch the video presentation: http://insidehpc.com/2015/09/video-hpc-for-the-louisiana-coastal-master-plan/
Learn more: http://hpcuserforum.com
Sign up for our insideHPC Newsletter: http://insidehpc.com/newsletter
一比一原版肯特大学毕业证UKC成绩单一模一样
原件一模一样【微信：6496090】【肯特大学毕业证UKC学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理肯特大学毕业证UKC学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理肯特大学毕业证UKC学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理肯特大学毕业证UKC学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理肯特大学毕业证UKC学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Timeless Principles of Good Design
Timeless Principles of Good Design from my 2015 Presentation at TYPO SF
More Related Content
Similar to Modular Pod Structural Design
Modular Buildings
In this presentation, the technology of MODULAR BUILDINGS has been discussed along with its Uses, Construction Process, Manufacturing Process, Design Considerations, Zoning Considerations, Strength Considerations, Advantages and Disadvantages.
Piloting rainwater harvesting for MUS in Dire Dawa, Ethiopia
Presentation sharing the lessons on piloting rain water harvesting for MUS in Dire Dawa, Ethiopia. By Sean Patrick, RAIN Foundation. Presentation during the Seminar on Multiple Use Water Services in the context of Dutch policy and practice. Wednesday 26 June 2013, The Hague, The Netherlands.
UMAID IQBAL SEMINAR.pptx
This document summarizes a seminar presentation on box pushing technology. Box pushing technology involves prefabricating concrete box segments and pushing them underground using hydraulic jacks to form tunnels, culverts, and other underground structures with minimal excavation. The presentation covers the objectives of box pushing, key components of the process, construction steps, advantages over conventional excavation methods, safety measures, environmental benefits, and future trends in the technology. Box pushing allows for faster, less disruptive, and more cost-effective construction of underground infrastructure compared to traditional excavation methods.
Ct3 presentation slides
This document discusses blockwork construction and provides details on the manufacturing process and uses of concrete blocks. It describes how concrete blocks are made by mixing raw materials like cement, sand and gravel, then molding and curing the blocks. Examples are given of common block types and their compositions. The document also provides a case study on the use of blockwork in constructing a secondary school in Malaysia and residential buildings in India.
Latest ct3
This document discusses blockwork construction and provides details on the manufacturing process and uses of concrete blocks. It describes how concrete blocks are made by mixing raw materials like cement, sand and gravel, then molding and curing the blocks. Examples are given of common block types and their compositions. The document also provides a case study on the use of blockwork in constructing a secondary school in Malaysia and residential buildings in India.
Alternate Building Materials,Alternative Construction Technology and Rain Wat...
The Core of any construction project is its design and at basic level is the materials used.
During the first phase of civilization we used the raw material such as leaves, branches and animal hides for the construction but with increase in our intellect we started improvising other materials such as stone, clay and timber.
With growing time we developed other materials such as brick and concrete, these materials went under great change and stayed till date from the starting of Egyptian civilisation to the present one.
The sudden change in the palate for construction was marked by the INDUSTRIAL REVOLUTION giving birth to various materials such as metals, glass and steel. It gave rise to many new technologies.
After the industrial revolution many materials had come up over these years. Such as PVC and plastics , many types of concrete like ferrocrete & precast, GRF etc. even now lot of researches are going on new materials and about increasing the efficiency of earlier one.
Concrete homes intl_english_20130130(1)
Western Forms provides aluminum forming systems for cast-in-place concrete construction. Their systems allow builders to construct concrete homes, apartments, and other structures quickly and affordably. Their lightweight, modular forms can be used to construct exterior walls, interior walls, floors, and other elements. Builders can reportedly construct an entire house in a single day using Western Forms systems. The systems have been used on projects in over 40 countries.
Lecture_all.pdf
The document provides information on building construction steps including specifying the project target, preparing project requirements, engineering design, and project execution. It discusses types of buildings classified by execution method (site execution vs. precast/prefabricated) and construction design (frame, bearing wall, and frame & bearing wall buildings). The document also covers building construction development factors like good design, suitable materials, execution, and quality control.
T e m p o r a r y s t r u c t u r e s 2 1
The document discusses different types of temporary structures. It begins with introducing temporary structures and defining them. It then discusses the history of temporary structures dating back 44,000 years. Some key early temporary structures discussed include tipis and yurts. The document then covers classifications of temporary structures according to their basic functions and structural behavior. It identifies and describes different types of temporary structures including membrane structures like tents, pneumatic structures, net structures, shell structures, space frame structures, geodesic domes, folded plate structures, and bamboo structures. The document provides examples and diagrams to illustrate these different temporary structure types.
Introduction to Underground Structures _ Building Structures
Underground infrastructure refers to any physical infrastructure that is placed beneath the surface.
The space created below the ground surface. Underground space is available almost everywhere, which may provide the
site for activities or infrastructure that are difficult or impossible to install aboveground
or whose presence aboveground is unacceptable or undesirable. Another
fundamental characteristic of underground space lies in the natural protection
it offers to whatever is placed underground. This protection is simultaneously
mechanical, thermal, acoustic, and hydraulic (i.e., watertight). It is effective
not only in relation to the surface, but also within the underground space itself.
Thus underground infrastructure offers great safety against all natural disasters
and nuclear wars, ultraviolet rays from holes in the ozone layer, global warming,
electromagnetic pollution, and massive solar storms. Increasing population and the developing needs and aspirations of humankind
for our living environment require increasing provision of space of all
kinds. This has become a high priority for most “mega cities” since the closing
years of the 20th century. The world’s population is becoming more urbanized,
at an unprecedented pace.
In different countries, various facilities have been built underground. These
facilities include:
● Underground parking space
● Rail and road tunnels
● Sewage treatment plants
● Garbage incineration plants
● Underground mass rapid transport systems, popularly known as “underground
metro”
● Underground oil storage and supply systems (through pipelines in tunnels)
● Underground cold storage
● Hydroelectric projects with extensive use of underground caverns and
tunnels
In the primitive ages, beginning roughly three million years ago, from the time
human beings first existed on earth to the Neolithic age of approximately 3000
B.C., underground space was used in the form of cave dwellings so that people
could protect themselves from the threats posed by natural (primarily climatic)
hazards. The world’s biggest cave is 207 m high and 152 m wide in a Vietnam
forest. This Hang Son Doong cave is larger than the Dear cave in Sarawak,
Malaysia, which is more than 100 m high and 90 m wide. Following this period,
in ancient times from roughly 3000 B.C. to A.D. 500, which spanned the civilizations
of Egypt, Mesopotamia, Greece, and Rome, technology employed in
the construction of tunnels progressed considerably.
The earliest examples of underground structures in India were in the form of
dwelling pits cut into the compacted loess deposits in Kashmir around 3000 and
500 B.C. This was brought to light by the Archaeological Survey of India (ASI)
during excavations in 1960. These pit houses were found to provide excellent protection
against cold and severe winter weather as well as the heat of summer. They
also offered protection against external attack. Dwellings dating back to 1600 B.C.
were also noted at Nagarjuna Konda in Andhra
Emergency shelter System Design by Shirish Avrani
The document describes the design of an emergency shelter system for earthquake victims in Kutch, India. The shelter was designed to be (1) made from locally available and reusable materials like steel pipes and corrugated sheets, (2) modular for fast construction through a do-it-yourself approach, and (3) able to be incrementally upgraded over time as needs change. The proposed design uses steel pipe cots as modular units that can be assembled into different shelter configurations and easily transported, constructed, reused, or dismantled. A demonstration shelter was successfully constructed using this system to house earthquake victims.
B.con 2 report
The document outlines the design and construction of a 1:5 scale model of a temporary bus shelter. It describes the initial design process which included ideas inspired by a clothes drying rack. The final design features a butterfly roof structure supported by timber columns. Detailed construction steps are provided, including how the floor, walls, roof and other elements are connected through various joints like lap joints and L-shaped brackets. The project aimed to demonstrate understanding of building construction techniques.
Mod. 1.pptx
This document outlines the details of a course on Advanced Construction Technology. The course aims to teach students the latest construction techniques applied to substructure and superstructure. It covers 6 modules that will provide knowledge on techniques like box jacking, pipe jacking, ground improvement methods, dredging systems, and rehabilitation/strengthening techniques. On completing the course, students will gain expertise in evaluating construction procedures, understanding various construction stages, and applying new construction technologies to special structures.
Modular building seminar REPORT 1
Modular buildings are constructed of prefabricated components made in a factory that are then assembled on-site. They offer advantages of faster construction at lower costs compared to traditional on-site building. Modular buildings can be used for both temporary and permanent structures and come in a range of sizes from small single units to large multi-building campuses. They are built to the same codes and standards as traditional buildings and have equivalent durability and lifespan.
CT III IBS Formwork System
This document discusses tunnel formwork construction and provides details about a group project on the topic. It begins with an introduction to Industrialized Building Systems (IBS) and focuses on tunnel formwork. The construction process is described along with advantages like quality, speed, cost savings and disadvantages such as initial costs. Two case studies are presented: a 44-story residential building in Atlanta used tunnel forms to complete a floor every 3 days and a residential project in India that used tunnel forms to construct 25 towers efficiently.
PREFABRICATED CONSTRUCTION
Prefabricated structures, also known as prefab structures, offer several benefits across various sectors. Some of the key advantages include:
Speed of Construction: Prefabricated structures are built off-site in a controlled environment concurrently with site preparation, significantly reducing construction time. Once on-site, assembly is quicker compared to traditional construction methods, saving time and resources.
Cost-Effectiveness: Prefab structures often result in cost savings due to efficient material usage, reduced labor expenses, and minimized construction waste. Additionally, economies of scale in manufacturing contribute to lower overall project costs.
Quality Control: Manufacturing prefabricated components in a factory setting allows for stringent quality control measures. This results in higher-quality products with consistent standards, as factors such as weather conditions and on-site variables are mitigated.
Design Flexibility: Prefabricated structures offer versatile design options to meet diverse architectural and functional requirements. Modular components can be customized, combined, or replicated to create tailored solutions for various applications.
Environmental Sustainability: Prefabrication reduces environmental impact by optimizing material usage, minimizing waste generation, and often incorporating sustainable materials. Additionally, the controlled manufacturing process can enhance energy efficiency and reduce carbon emissions.
Improved Safety: Prefabrication can enhance on-site safety by reducing the need for labor-intensive tasks and minimizing exposure to hazardous conditions. The controlled environment of factory production also reduces the risk of accidents compared to traditional construction sites.
Adaptability and Scalability: Prefabricated structures are inherently adaptable and scalable, allowing for easy modification, expansion, or relocation as needs evolve. This flexibility makes them suitable for a wide range of applications, including temporary and permanent structures.
Predictability and Consistency: Prefabricated construction offers greater predictability in project timelines and outcomes. With standardized components and assembly processes, there is reduced variability, resulting in more reliable project delivery.
Overall, the benefits of prefabricated structures make them a compelling choice for various construction projects, offering efficiency, cost savings, quality assurance, and sustainability advantages.
UCEN SRP PROJECT.pptx
This document discusses the design of a fire protection system for the University College of Engineering (UCEN) building using AutoCAD. It outlines the advantages of designing fire protection systems in AutoCAD, including minimizing errors compared to manual drafting. It then discusses common fire-resistant construction materials and firefighting equipment like sprinklers and extinguishers. The document details how the UCEN building will be modeled in AutoCAD, including placing sprinklers in labs and extinguishers every 30 meters. Implementing this fire protection system will help protect lives and property in case of a fire.
Optimizing and Saving WATER in achieving Green Construction
- Water conservation is important as only 3% of the world's water is potable and available for drinking. Construction activities currently consume significant amounts of water.
- Sustainable construction focuses on reducing water usage through efficient designs, materials selection, rainwater harvesting, and wastewater recycling. Techniques presented included using local materials, reducing cement/steel, harvesting rainwater, installing efficient fittings, and treating wastewater on-site.
- A national innovation week is being organized in India to encourage schools to calculate their water usage and carbon footprint to increase awareness around efficient water usage and sustainability.
Marina barrage (09/10s2)
The document outlines the design and construction of the Marina Barrage in Singapore. It was built across the Marina Channel to create a reservoir and address flooding issues. Some key points:
- It serves as a water supply source, provides flood control, and is a lifestyle attraction.
- Nine crest gates were installed to block seawater. Over 850 piles support the barrage structure.
- Environmental features include a green roof, solar panels, and sustainable materials and technologies.
- The interior design maximizes natural light, ventilation and reuse of materials to reduce energy usage.
Louisiana coastal master plan
In this deck from the HPC User Forum, Zachary Cobell from ARCADIS-US presents: High Performance Computing for the Louisiana Coastal Master Plan.
Watch the video presentation: http://insidehpc.com/2015/09/video-hpc-for-the-louisiana-coastal-master-plan/
Learn more: http://hpcuserforum.com
Sign up for our insideHPC Newsletter: http://insidehpc.com/newsletter
Similar to Modular Pod Structural Design (20)
Piloting rainwater harvesting for MUS in Dire Dawa, Ethiopia
Piloting rainwater harvesting for MUS in Dire Dawa, Ethiopia
Alternate Building Materials,Alternative Construction Technology and Rain Wat...
Alternate Building Materials,Alternative Construction Technology and Rain Wat...
Introduction to Underground Structures _ Building Structures
Introduction to Underground Structures _ Building Structures
Optimizing and Saving WATER in achieving Green Construction
Optimizing and Saving WATER in achieving Green Construction
Recently uploaded
一比一原版肯特大学毕业证UKC成绩单一模一样
原件一模一样【微信：6496090】【肯特大学毕业证UKC学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理肯特大学毕业证UKC学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理肯特大学毕业证UKC学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理肯特大学毕业证UKC学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理肯特大学毕业证UKC学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Timeless Principles of Good Design
Timeless Principles of Good Design from my 2015 Presentation at TYPO SF
Impact of Fonts: in Web and Apps Design
Fonts play a crucial role in both User Interface (UI) and User Experience (UX) design. They affect readability, accessibility, aesthetics, and overall user perception.
哪里办理美国中央华盛顿大学毕业证双学位证书原版一模一样
原版一模一样【微信：741003700 】【美国中央华盛顿大学毕业证双学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
International Upcycling Research Network advisory board meeting 4
Slides used for the International Upcycling Research Network advisory board 4 (last one). The project is based at De Montfort University in Leicester, UK, and funded by the Arts and Humanities Research Council.
Divertidamente SLIDE.pptxufururururuhrurid8dj
Hsuehebvdhdueuw8wiiwieih3udud8e8wisbdydvw7wbidj38ehehdheuwjhdiwjwieheheueurhryrurhrgryd7eueue
AHMED TALAAT ARCHITECTURE PORTFOLIO .pdf
Architectural and constructions management experience since 2003 including 18 years located in UAE.
Coordinate and oversee all technical activities relating to architectural and construction projects,
including directing the design team, reviewing drafts and computer models, and approving design
changes.
Organize and typically develop, and review building plans, ensuring that a project meets all safety and
environmental standards.
Prepare feasibility studies, construction contracts, and tender documents with specifications and
tender analyses.
Consulting with clients, work on formulating equipment and labor cost estimates, ensuring a project
meets environmental, safety, structural, zoning, and aesthetic standards.
Monitoring the progress of a project to assess whether or not it is in compliance with building plans
and project deadlines.
Attention to detail, exceptional time management, and strong problem-solving and communication
skills are required for this role.
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...Designforuminternational
India’s architectural landscape is a vibrant tapestry that weaves together the country's rich cultural heritage and its modern aspirations. From majestic historical structures to cutting-edge contemporary designs, the work of Indian architects is celebrated worldwide. Among the many firms shaping this dynamic field, Design Forum International stands out as a leader in innovative and sustainable architecture. This blog explores some of the best Indian architects, highlighting their contributions and showcasing the most famous architects in India.SECURING BUILDING PERMIT CITY OF CALOOCAN.pdf
How to apply for building permit in the city of Caloocan?
What is a building permit?
Who applies for building permit?
Manual ISH (International Society of Hypertension)
Manual ISH (International Society of Hypertension)
定制美国西雅图城市大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【美国西雅图城市大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANE
CapCut is an easy-to-use video editing app perfect for beginners. To start, download and open CapCut on your phone. Tap "New Project" and select the videos or photos you want to edit. You can trim clips by dragging the edges, add text by tapping "Text," and include music by selecting "Audio." Enhance your video with filters and effects from the "Effects" menu. When you're happy with your video, tap the export button to save and share it. CapCut makes video editing simple and fun for everyone!
一比一原版阿肯色大学毕业证(UCSF毕业证书)如何办理
学校原件一模一样【微信：6496090】【阿肯色大学毕业证(UCSF毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
ARENA - Young adults in the workplace (Knight Moves).pdf
Presentations of Bavo Raeymaekers (Project lead youth unemployment at the City of Antwerp), Suzan Martens (Service designer at Knight Moves) and Adriaan De Keersmaeker (Community manager at Talk to C)
during the 'Arena • Young adults in the workplace' conference hosted by Knight Moves.
原版制作(MDIS毕业证书)新加坡管理发展学院毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(MDIS毕业证书)新加坡管理发展学院毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(LSBU毕业证书)伦敦南岸大学毕业证如何办理
学校原件一模一样【微信：6496090 】【(LSBU毕业证书)伦敦南岸大学毕业证成绩单】【微信：6496090 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微6496090
【主营项目】
一.毕业证【q微6496090】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微6496090】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (20)
International Upcycling Research Network advisory board meeting 4
International Upcycling Research Network advisory board meeting 4
Introduction to User experience design for beginner
Introduction to User experience design for beginner
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...
Manual ISH (International Society of Hypertension)
Manual ISH (International Society of Hypertension)
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANE
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANE
ARENA - Young adults in the workplace (Knight Moves).pdf
ARENA - Young adults in the workplace (Knight Moves).pdf
Modular Pod Structural Design
- 1. Modular Pod Structures Pranav Manoj Darda MS Structural Engineering Politecnico di Milano www.istructe.org
- 2. Drury Award Why Bangladesh ? • 80% land-mass is flood prone • Waterlogged land for 3 months • Subject to frequent storms Modular Pod Structures 2
- 3. Drury Award Mono-pod Design • Vernacular styled structure using local materials • Improvising using empty drums and scaffolding (hollow) steel bar 3 Modular Pod Structures
- 4. Drury Award Flood-Protection Mechanism • A unique tube-in-tube mechanism • Scaffolding bar acting as a stilt in dry condition and as guiding pole in floods • Empty drums give buoyancy • Amphibious styled structure 4 Modular Pod Structures
- 5. Drury Award Construction Process • Feasible during floods as well • Portable units speed up construction • Simple process empowering local communities 5 Modular Pod Structures Stage 1: During Floods • Temporary assembly of Structure Stage 2: After Floods • Concreting and bracing
- 6. Drury Award Space Design • Mono-pod units can be assembled to make larger units • Personalised spaces as per family and occupational needs • Possibility to plan own houses improves the adoption on actual sites 6 Modular Pod Structures
- 7. Drury Award Safe Structures Conceptual structural analysis carried out with respect to: • Strong Winds • Lateral Water pressure • Working of buoyant raft • Material strength of bamboo Results, prove that the design is safe for actual use 7 Modular Pod Structures
- 8. Drury Award 8 Modular Pod Structures Why this design works ! • Low cost • Simple • Sustainable • Scope for improvisation • Alternatives available • Empowers and safeguards the local community Success in small community could inspire large scale adaptations
- 9. Modular Pod Structures Pranav Manoj Darda MS Structural Engineering Politecnico di Milano 9
Editor's Notes
- Speaker’s cover slide
- Text only slide
- Text only slide – example 2. Please use the colours in this palette for bullet points/charts
- Text only slide – example 2. Please use the colours in this palette for bullet points/charts
- Text only slide – example 2. Please use the colours in this palette for bullet points/charts
- Text only slide – example 2. Please use the colours in this palette for bullet points/charts
- Text only slide – example 2. Please use the colours in this palette for bullet points/charts
- Image only slide – placeholder image as guidance only.
- Divider slide – example.