2. Hip Replacement
- Acetobular cup system & Uncemented stem
- Acetobular cup system & cemented stem
- Bi-polar cup system & Cemented stem
Knee Replacement
- Freedom Knee
- DestiKnee
3. 1. Acetobular cup system &
Uncemented stem
2. Acetobular cup system &
cemented stem
3. Bipolar cup system &
Uncemented stem
5. Cementless Acetabular System:
1. Shell
2. Liner
Femoral Head :
1. Bilox®: Ceramic Head
2. Latitude CoCr: Metal Head
Cementless Stem System:
1. Acetobular cup system & Uncemented stem
6. LATITUD ACETABULAR CUP SYSTEM
1. Shell:
hemispherical , titanium
Rough porous coating on outer surface
Coated with adhesion(Hydroxyapatite HA),
Two/Three screw holes for fixation with bone
available in different sizes from 40 to 70 mm
in 2 mm increments
2. Liner:
Polyethylene (UHMWPE)
sizes: inner diameter (22 – 40 mm) +2
outer diameter (35 – 52 mm) +2
1. Acetobular cup system & Uncemented stem
7. LATITUD FEMORAL HEAD
Modular Femoral Head is manufactured from Cobalt-
Chromium alloy (CoCr)
Modular Femoral Head is intended to be used with
uncemented stem or cemented stem through 12/14
taper connection
. Modular Femoral Head is available in different sizes
based on outer diameter ranging from 22 to 40 mm
with different offsets viz. +0.0, +3.5, -3.5, +4.0, -4.0,
+7.0
1. Acetobular cup system & Uncemented stem
8. Uncemented femoral stem is manufactured from Titanium
Uncemented femoral stem has both vertical and horizontal
grooves to provide rotational and axial stability.
hydroxyapatite (HA) coating.
Uncemented femoral stem is available in (11) sizes (viz. 0,
1, 2, 3, 4, 5, 6, 7, 8, 9, 10) with three different neck angle
viz:
1. 135 Standard (for stem size 0 to size 10).
2. 135 lateralized (for stem size 0 to size 10).
3. 125 Standard (for stem size 0 to size 10).
Recommended to be used with CoCr femoral head, or
Ceramic femoral head.
LATITUD CEMENTLESS FEMORAL STEM
1. Acetobular cup system & Uncemented stem
11. The cemented femoral stem is manufactured from High
Nitrogen Stainless Steel(HNSS)
highly polished, double tapered, collarless design and is
intended to be used with bone cement (cemented
fixation).
The cemented femoral stem neck has standard 12/14
taper male trunnion for connection to modular femoral
head.
This stem is available in 9 different sizes with:
- standard (sizes 0, 1, 2, 3, 4) and
- narrow (sizes 1, 2, 3, 4) neck offsets
Recommended to be used with HNSS metal femoral
head, or Ceramic femoral head.
2. Acetobular cup system & cemented stem
12. LATITUD-BIPOLAR CUP SYSTEM
Bipolar monoblock shell is comprised of inner
liner and highly polished stainless steel outer
metal dome.
In Vivo, the outer surface of the bipolar
monoblock shell articulates directly with well-
preserved acetabulum while the inner surface
of bipolar monoblock shell articulates with
compatible modular femoral head.
The bipolar monoblock shell is available in
variety of sizes with different outer diameter
(37 mm to 43 mm) and an inner diameter (22
mm and 28 mm).
3. Bipolar cup system & cemented stem
16. Total Knee
Replacement
The only 7-radii femoral implant in
the world.
Radii 1,2 & 3 patella-femoral
contact.
Thin Anterior flange
Small femoral box profile
Smooth extensor mechanism helps
in reducing anterior knee pain.
17. Total Knee
Replacement
Achieve rotation up to 15 degree
at deep flexion to prevent post-
cam impingement, thereby
reducing wear & tear of poly.
Increased femoral roll back (High
Flexion 150°).
Concentrate load towards center
of the poly.
22. Total Knee
Replacement
Small femoral box profile – for the
preservation of the host’s bone
7-radii patented design.
120 degree flexion
7 sizes for left & right knee