Microsoft word ns-1082.doc (1)
•
0 likes•178 views
The document provides specifications for the McCloskey S130/190 Live Head. It has a double deck design with heavy duty screen bearings and foldable side plates for transport. Key specifications include screen dimensions of 2150mm x 3200mm for the top deck and 1930mm x 3200mm for the bottom deck. It can operate at a screen angle between 10 to 20 degrees with adjustable speed and a screen stroke of 5-6mm. Maximum feed heights are 4022mm for tracks and 4282mm for wheels. Optional configurations include punch plates and a single deck design.
Report
Share
Report
Share
Download to read offline
Recommended
Browning belt drive monthly february 2015 volume 37
Browning's new Tenso-Set quick release motor base allows belt changes to be completed in under a minute. At a recent trade show, the fastest belt change recorded was 20.1 seconds. The base uses a patent-pending quick release latch that slides the motor carriage forward with just a few turns of an adjusting screw, providing enough slack to easily change belts. The base also features a spring design that automatically maintains proper belt tension to reduce maintenance needs.
Browning Belt Drive Monthly / Volume 37
Is it True That One Minute Belt Changes Are Possible With Browning’s New Tenso-Set™ Quick Release Motor Base?...YES!!
Inertia dynamics sfpbc500f_specsheet
This document provides specifications for the SFPBC-500 normal duty clutch/brake coupling, including:
- Static torque ratings of 50 lb-ft for the clutch and 40 lb-ft for the brake.
- A maximum operating speed of 4,000 rpm.
- Standard voltage options of 6, 24, and 90V DC.
- Dimensions and tolerances for alignment of mounting surfaces.
- An exploded diagram and parts list for the coupling assembly.
Torque systems ms150_specsheet
The MS150 Linear Actuator provides accurate positioning with up to 150 lbs of thrust and speeds of 30 in/sec. It can replace pneumatic or hydraulic actuators requiring multiple positions. It integrates easily with machine controls via DC brush or brushless motors. Its stainless steel tube and seal provide trouble-free operation, and multiple mounting options eliminate custom brackets.
Thomson roundrail 1_dc_specsheet
This document provides specifications for various side mounted linear guide assemblies with table tops. It includes specifications for different sized linear guides, pillow block bearings, support rails, and table tops. Key specifications listed include part numbers, dimensions, load ratings, and material information. The document explains that Thomson linear guides require specifying the system length as a suffix to the standard part number.
Inertia dynamics sfpbc500fhd_specsheet
This document provides specifications for a heavy duty clutch/brake coupling. It includes dimensions, part numbers, and ordering information for the various components. The coupling comes in different voltage and bore size options and can be configured for inside or outside mounting. It meets UL and CSA safety standards when used with the appropriate conduit box.
780137
This document describes a patent application filed in 1957 relating to improvements in axial-flow compressors. Specifically, it describes using softer aluminum alloy sealing rings between stages to prevent damage to steel rotor rims from rubbing or interference during operation. The soft rings are able to deform away from the rotor to avoid scoring while wearing away through interference to maintain clearance. Tests showed aluminum rings would perform satisfactorily due to their higher hardness and melting point compared to air temperatures inside compressors, but lower than steel rotor rims. The rings are also angled non-perpendicular to the rotor flanges to reduce interference wear.
780137
This document describes a patent application filed in 1957 relating to improvements in axial-flow compressors. Specifically, it describes using softer aluminum alloy sealing rings between compressor stages to prevent damage to steel rotor rims from interference during operation. The soft rings are installed at a small initial clearance so that they deform away from the rotor to maintain a minimum gap without scoring the thin rim. Tests showed aluminum rings could satisfactorily wear away under high rim velocities over 800 feet per second due to their higher hardness and melting point compared to steel.
Recommended
Browning belt drive monthly february 2015 volume 37
Browning's new Tenso-Set quick release motor base allows belt changes to be completed in under a minute. At a recent trade show, the fastest belt change recorded was 20.1 seconds. The base uses a patent-pending quick release latch that slides the motor carriage forward with just a few turns of an adjusting screw, providing enough slack to easily change belts. The base also features a spring design that automatically maintains proper belt tension to reduce maintenance needs.
Browning Belt Drive Monthly / Volume 37
Is it True That One Minute Belt Changes Are Possible With Browning’s New Tenso-Set™ Quick Release Motor Base?...YES!!
Inertia dynamics sfpbc500f_specsheet
This document provides specifications for the SFPBC-500 normal duty clutch/brake coupling, including:
- Static torque ratings of 50 lb-ft for the clutch and 40 lb-ft for the brake.
- A maximum operating speed of 4,000 rpm.
- Standard voltage options of 6, 24, and 90V DC.
- Dimensions and tolerances for alignment of mounting surfaces.
- An exploded diagram and parts list for the coupling assembly.
Torque systems ms150_specsheet
The MS150 Linear Actuator provides accurate positioning with up to 150 lbs of thrust and speeds of 30 in/sec. It can replace pneumatic or hydraulic actuators requiring multiple positions. It integrates easily with machine controls via DC brush or brushless motors. Its stainless steel tube and seal provide trouble-free operation, and multiple mounting options eliminate custom brackets.
Thomson roundrail 1_dc_specsheet
This document provides specifications for various side mounted linear guide assemblies with table tops. It includes specifications for different sized linear guides, pillow block bearings, support rails, and table tops. Key specifications listed include part numbers, dimensions, load ratings, and material information. The document explains that Thomson linear guides require specifying the system length as a suffix to the standard part number.
Inertia dynamics sfpbc500fhd_specsheet
This document provides specifications for a heavy duty clutch/brake coupling. It includes dimensions, part numbers, and ordering information for the various components. The coupling comes in different voltage and bore size options and can be configured for inside or outside mounting. It meets UL and CSA safety standards when used with the appropriate conduit box.
780137
This document describes a patent application filed in 1957 relating to improvements in axial-flow compressors. Specifically, it describes using softer aluminum alloy sealing rings between stages to prevent damage to steel rotor rims from rubbing or interference during operation. The soft rings are able to deform away from the rotor to avoid scoring while wearing away through interference to maintain clearance. Tests showed aluminum rings would perform satisfactorily due to their higher hardness and melting point compared to air temperatures inside compressors, but lower than steel rotor rims. The rings are also angled non-perpendicular to the rotor flanges to reduce interference wear.
780137
This document describes a patent application filed in 1957 relating to improvements in axial-flow compressors. Specifically, it describes using softer aluminum alloy sealing rings between compressor stages to prevent damage to steel rotor rims from interference during operation. The soft rings are installed at a small initial clearance so that they deform away from the rotor to maintain a minimum gap without scoring the thin rim. Tests showed aluminum rings could satisfactorily wear away under high rim velocities over 800 feet per second due to their higher hardness and melting point compared to steel.
Inertia dynamics sfc400b_specsheet
This document provides specifications for an SFC-400 bearing mounted clutch coupling, including bore and keyway sizes for armatures and rotors, static torque and maximum speed, standard voltages, and part numbers for ordering. Dimensional drawings and an exploded view diagram show the components of the clutch coupling.
5298 kurt generic rotary table
This document summarizes the features of a Kurt rotary table workholding system. The system includes a high density vise tower that can hold multiple parts in eight clamping stations to increase productivity. It provides repeatable clamping down to 0.0002" and each station delivers up to 7,460 lbs of clamping force. A variety of jaw options are available to suit different applications. The system comes with components like a four-sided column, end support assembly, and indexer locator. Kits are compatible with several brands of CNC lathes and machining centers.
Team Nunchucks_updated 2 dec
The team designed a wind turbine power transmission system with the following specifications:
- Input speed of 16 rpm, output speed of 1800 rpm, for a speed ratio of 111.2
- Max power output of 1700Kw, steady state power of 1600Kw
- Uses two planetary gear sets followed by a parallel spur gear set
- Shafts, gears, bearings and keys were designed and analyzed to meet the requirements of max weight of 16000kg, 97% efficiency, and $150k max cost.
Stress analysis and factor of safety calculations were performed to validate the design.
Form 9879 e
The Browning Tenso-set Series 600 horizontal sliding motor base automatically maintains v-belt tension over time through a constant spring tension mechanism. It allows quick belt changes within minutes through an optional quick release that de-tensions the drive and slides open a release lever gate to access the belts. Benefits include reduced belt change time, improved efficiency through constant tension, superior drive alignment, and improved safety over traditional belt changes.
Harmonic shf shg_catalog
The document discusses Harmonic Drive SHF and SHG series precision gear components and housed units. It provides ordering information, descriptions of the strain wave gearing mechanism and principle, driving configurations, application examples, and specification tables for torque, speed, and other performance metrics. Key details include the 'S' tooth profile that increases torque capacity and life, hollow and solid shaft unit types, and example applications in robotics.
Inertia dynamics sfc1000f_specsheet
This document provides specifications for an SFC-1000 flange mounted clutch coupling. It lists dimensions, torque ratings, speeds, voltages and other technical details. Customers must maintain concentricity and squareness of mounting surfaces. The document includes an exploded view diagram labeling parts and provides instructions for ordering replacements.
Grinding Machine
The document discusses M&D Advance Technology Co., Ltd. and provides information about grinding machines and their specifications, including flexible shaft models and sizes, tool holders and accessories, the grinding machine assembly process, applications and sample working steps, abrasives used, and thanks customers for their trust in the company's products and services.
780131
This document is a patent specification from 1957 describing improvements to screw presses. It details a screw press design that uses a hollow screw spindle with a suspension rod running longitudinally through it. The suspension rod engages with a thrust bearing assembly carrying the sliding head and is mounted at one end of the spindle. This overcomes issues with prior designs like notch effects and screw breakages, while allowing the screw to withstand greater pressures.
780131
This document is a patent specification from 1957 describing improvements to screw presses. It details a screw press design that uses a hollow screw spindle with a suspension rod running longitudinally through it. The suspension rod engages with a thrust bearing assembly carrying the sliding head and is mounted at one end of the spindle. This overcomes issues with prior designs like notch effects and screw breakages, while allowing the screw to withstand greater pressures.
Inertia dynamics sf1000fhd_specsheet
This document provides specifications for the Clutch Heavy Duty SF-1000 Flange Mounted clutch. It has a shaft size range of 0.500-2.000 inches, static torque of 240 lb-ft, and maximum speed of 3,600 rpm. Standard voltages are 6, 24, and 90 VDC. It provides dimensions for mounting holes and pilots. Tolerances are provided for concentricity and squareness that must be met by customers providing their own hub or pilot.
Thomson roundrail 1_cc_specsheet
The document contains specifications for various continuously supported linear guide assemblies with table tops, including dimensions, load ratings, and part numbers. It describes double linear guide assemblies with either 4 pillow blocks or 2 twin pillow blocks and a table top for mounting workpieces. Component materials and lubrication access options are also noted.
Thomson roundrail 1_vb_double_unsupported_specsheet
This document contains specifications for various FluoroNyliner linear guide models with part numbers, dimensions, mountings, and materials. It describes 1VB linear guides which use double linear race shafts and allow for custom end supports. Components include 4 or 2 self-aligning bearing pillow blocks. Specification of guides includes the part number, length, nominal diameter, bearing type, and block type. Performance notes provide contact information for additional engineering details.
Inertia dynamics sfpbc650fp_specsheet
This document provides specifications for the SFPBC-650 clutch/brake coupling, including:
- Shaft size range of 0.500-1.500 inches and maximum speed of 3,600 rpm.
- Static torque ratings of 95 lb-ft for both the clutch and brake.
- Standard voltage options of 6, 24, and 90V DC.
- Dimensions and mounting details for the various components.
12777 coastal single pages part39
This document provides information on hardware components for the Tritus Flush Casement Window System, including shoot bolt keeps, ear espag bolts, and IPA receivers. It lists various part numbers, descriptions, finishes, and specifications for components that can be used for single casement windows with shoot bolts or ear espag bolts. Dimensions and other details are provided for the different bolt options.
2011 5 ik-60w-gu-sp
1. The document provides specifications for 60W AC induction motors and gear motors including dimensions, ratings, torque values, and connection diagrams.
2. Speed control motors come in 90mm frames and include thermal overload protection. Permissible loads and inertia values are listed for round shafts.
3. Gear ratios from 3 to 200 are shown with efficiency and speed/torque values. Higher ratios require a 10:1 middle gearbox. Motor and gearhead dimensions and weights are also specified.
Inertia dynamics wrapspring_dcb5sm_specsheet
This document provides specifications and part numbers for the DCB-5 SUPER metric wrap spring clutch. It lists the maximum speed, static and anti-overrun torques, positioning accuracy, weight, and available solenoid voltages. Dimensional drawings and exploded views show the components, including input/output hubs, springs, plates, and actuators. Replacement part numbers are provided for wear items.
Tecnología educativa
El documento describe las características principales de un blog. Un blog es un sitio web donde uno o más autores publican contenido de forma cronológica, con las publicaciones más recientes apareciendo primero. Los blogs permiten comentarios de lectores y herramientas para que los autores coordinen, borren o reescriban artículos. Pueden usarse con fines periodísticos, empresariales, educativos u otros, y representan la esencia de publicar nuevo contenido con frecuencia y recibir retroalimentación de los lectores a través de comentarios
Academusoft
Los estudiantes de primer semestre de la universidad del atlántico o quienes aun no tienen dominio del sistema, pueden revisar las siguientes diapositivas para así tener mas claro el uso de esta herramienta académica virtual.
Visita a un infocentro
El infocentro Machado La Luz Sabanita se encuentra ubicado en la calle Cuba en La Sabanita. Fue inaugurado en mayo de 2007 y atiende de lunes a sábado de 8 am a 1 pm y de 1 pm a 6 pm, ofreciendo cursos de alfabetización tecnológica, talleres sociopolíticos y acceso a computadoras con sistema operativo Canaima. El inventario incluye 15 computadoras Vit con procesador de 512 MB, memoria RAM de 512 MB, disco duro de 240 GB y monitor de 18 pul
Programa nacional de formación en informática
Este documento presenta los integrantes y fundamentos del Programa Nacional de Formación en Informática. Los integrantes son 5 personas con sus respectivos números de cédula. Los fundamentos del programa incluyen desarrollar habilidades técnicas en el área informática según las necesidades y políticas del Estado venezolano, organización y participación responsable en la función pública, y preparación para el cambio con un enfoque de inclusión e identidad nacional.
More Related Content
What's hot
Inertia dynamics sfc400b_specsheet
This document provides specifications for an SFC-400 bearing mounted clutch coupling, including bore and keyway sizes for armatures and rotors, static torque and maximum speed, standard voltages, and part numbers for ordering. Dimensional drawings and an exploded view diagram show the components of the clutch coupling.
5298 kurt generic rotary table
This document summarizes the features of a Kurt rotary table workholding system. The system includes a high density vise tower that can hold multiple parts in eight clamping stations to increase productivity. It provides repeatable clamping down to 0.0002" and each station delivers up to 7,460 lbs of clamping force. A variety of jaw options are available to suit different applications. The system comes with components like a four-sided column, end support assembly, and indexer locator. Kits are compatible with several brands of CNC lathes and machining centers.
Team Nunchucks_updated 2 dec
The team designed a wind turbine power transmission system with the following specifications:
- Input speed of 16 rpm, output speed of 1800 rpm, for a speed ratio of 111.2
- Max power output of 1700Kw, steady state power of 1600Kw
- Uses two planetary gear sets followed by a parallel spur gear set
- Shafts, gears, bearings and keys were designed and analyzed to meet the requirements of max weight of 16000kg, 97% efficiency, and $150k max cost.
Stress analysis and factor of safety calculations were performed to validate the design.
Form 9879 e
The Browning Tenso-set Series 600 horizontal sliding motor base automatically maintains v-belt tension over time through a constant spring tension mechanism. It allows quick belt changes within minutes through an optional quick release that de-tensions the drive and slides open a release lever gate to access the belts. Benefits include reduced belt change time, improved efficiency through constant tension, superior drive alignment, and improved safety over traditional belt changes.
Harmonic shf shg_catalog
The document discusses Harmonic Drive SHF and SHG series precision gear components and housed units. It provides ordering information, descriptions of the strain wave gearing mechanism and principle, driving configurations, application examples, and specification tables for torque, speed, and other performance metrics. Key details include the 'S' tooth profile that increases torque capacity and life, hollow and solid shaft unit types, and example applications in robotics.
Inertia dynamics sfc1000f_specsheet
This document provides specifications for an SFC-1000 flange mounted clutch coupling. It lists dimensions, torque ratings, speeds, voltages and other technical details. Customers must maintain concentricity and squareness of mounting surfaces. The document includes an exploded view diagram labeling parts and provides instructions for ordering replacements.
Grinding Machine
The document discusses M&D Advance Technology Co., Ltd. and provides information about grinding machines and their specifications, including flexible shaft models and sizes, tool holders and accessories, the grinding machine assembly process, applications and sample working steps, abrasives used, and thanks customers for their trust in the company's products and services.
780131
This document is a patent specification from 1957 describing improvements to screw presses. It details a screw press design that uses a hollow screw spindle with a suspension rod running longitudinally through it. The suspension rod engages with a thrust bearing assembly carrying the sliding head and is mounted at one end of the spindle. This overcomes issues with prior designs like notch effects and screw breakages, while allowing the screw to withstand greater pressures.
780131
This document is a patent specification from 1957 describing improvements to screw presses. It details a screw press design that uses a hollow screw spindle with a suspension rod running longitudinally through it. The suspension rod engages with a thrust bearing assembly carrying the sliding head and is mounted at one end of the spindle. This overcomes issues with prior designs like notch effects and screw breakages, while allowing the screw to withstand greater pressures.
Inertia dynamics sf1000fhd_specsheet
This document provides specifications for the Clutch Heavy Duty SF-1000 Flange Mounted clutch. It has a shaft size range of 0.500-2.000 inches, static torque of 240 lb-ft, and maximum speed of 3,600 rpm. Standard voltages are 6, 24, and 90 VDC. It provides dimensions for mounting holes and pilots. Tolerances are provided for concentricity and squareness that must be met by customers providing their own hub or pilot.
Thomson roundrail 1_cc_specsheet
The document contains specifications for various continuously supported linear guide assemblies with table tops, including dimensions, load ratings, and part numbers. It describes double linear guide assemblies with either 4 pillow blocks or 2 twin pillow blocks and a table top for mounting workpieces. Component materials and lubrication access options are also noted.
Thomson roundrail 1_vb_double_unsupported_specsheet
This document contains specifications for various FluoroNyliner linear guide models with part numbers, dimensions, mountings, and materials. It describes 1VB linear guides which use double linear race shafts and allow for custom end supports. Components include 4 or 2 self-aligning bearing pillow blocks. Specification of guides includes the part number, length, nominal diameter, bearing type, and block type. Performance notes provide contact information for additional engineering details.
Inertia dynamics sfpbc650fp_specsheet
This document provides specifications for the SFPBC-650 clutch/brake coupling, including:
- Shaft size range of 0.500-1.500 inches and maximum speed of 3,600 rpm.
- Static torque ratings of 95 lb-ft for both the clutch and brake.
- Standard voltage options of 6, 24, and 90V DC.
- Dimensions and mounting details for the various components.
12777 coastal single pages part39
This document provides information on hardware components for the Tritus Flush Casement Window System, including shoot bolt keeps, ear espag bolts, and IPA receivers. It lists various part numbers, descriptions, finishes, and specifications for components that can be used for single casement windows with shoot bolts or ear espag bolts. Dimensions and other details are provided for the different bolt options.
2011 5 ik-60w-gu-sp
1. The document provides specifications for 60W AC induction motors and gear motors including dimensions, ratings, torque values, and connection diagrams.
2. Speed control motors come in 90mm frames and include thermal overload protection. Permissible loads and inertia values are listed for round shafts.
3. Gear ratios from 3 to 200 are shown with efficiency and speed/torque values. Higher ratios require a 10:1 middle gearbox. Motor and gearhead dimensions and weights are also specified.
Inertia dynamics wrapspring_dcb5sm_specsheet
This document provides specifications and part numbers for the DCB-5 SUPER metric wrap spring clutch. It lists the maximum speed, static and anti-overrun torques, positioning accuracy, weight, and available solenoid voltages. Dimensional drawings and exploded views show the components, including input/output hubs, springs, plates, and actuators. Replacement part numbers are provided for wear items.
What's hot (16)
Thomson roundrail 1_vb_double_unsupported_specsheet
Thomson roundrail 1_vb_double_unsupported_specsheet
Viewers also liked
Tecnología educativa
El documento describe las características principales de un blog. Un blog es un sitio web donde uno o más autores publican contenido de forma cronológica, con las publicaciones más recientes apareciendo primero. Los blogs permiten comentarios de lectores y herramientas para que los autores coordinen, borren o reescriban artículos. Pueden usarse con fines periodísticos, empresariales, educativos u otros, y representan la esencia de publicar nuevo contenido con frecuencia y recibir retroalimentación de los lectores a través de comentarios
Academusoft
Los estudiantes de primer semestre de la universidad del atlántico o quienes aun no tienen dominio del sistema, pueden revisar las siguientes diapositivas para así tener mas claro el uso de esta herramienta académica virtual.
Visita a un infocentro
El infocentro Machado La Luz Sabanita se encuentra ubicado en la calle Cuba en La Sabanita. Fue inaugurado en mayo de 2007 y atiende de lunes a sábado de 8 am a 1 pm y de 1 pm a 6 pm, ofreciendo cursos de alfabetización tecnológica, talleres sociopolíticos y acceso a computadoras con sistema operativo Canaima. El inventario incluye 15 computadoras Vit con procesador de 512 MB, memoria RAM de 512 MB, disco duro de 240 GB y monitor de 18 pul
Programa nacional de formación en informática
Este documento presenta los integrantes y fundamentos del Programa Nacional de Formación en Informática. Los integrantes son 5 personas con sus respectivos números de cédula. Los fundamentos del programa incluyen desarrollar habilidades técnicas en el área informática según las necesidades y políticas del Estado venezolano, organización y participación responsable en la función pública, y preparación para el cambio con un enfoque de inclusión e identidad nacional.
Prac4
El documento describe las características y usos de varias herramientas de taller comunes, incluyendo sierras de arco para cortar metal y plástico, martillos para cualquier material con mango de madera y extremo de hierro, destornilladores con mango de plástico y punta de estrella o fina para cualquier material, ganzúas metálicas con diferentes puntas para cerrajeros, y llaves inglesas metálicas para ajustar y aflojar tornillos.
Exposicion
Este documento propone una lista de recursos informáticos para ser incluidos como contenidos en la enseñanza de la informática y la tecnología. Estos recursos incluyen bases de datos, mapas conceptuales, simulaciones, hojas de cálculo, herramientas de presentación multimedia y comunicación como chat y correo electrónico. El propósito es que estos recursos sirvan como herramientas para la construcción de conocimiento en lugar de una simple instrucción, ayudando al aprendizaje significativo.
La plaza para un millón de ciudadanos
La nueva plaza de Maipú es la gran oportunidad de reconocer en un espacio el proceso de crecimiento y modernización de una comuna.En las últimas dos décadas se ha consolidado como un polo de crecimiento urbano cuyo centro es la Plaza de Maipú.
Debido a esto que el objetivo principal de la renovación de la plaza es manejar de forma optima el nueva y gran flujo que traerá el metro. De ahí también su nombre La plaza de un millón de ciudadanos.
Web 2.
Este documento describe la evolución de la World Wide Web (WWW) hacia la Web 2.0. Explica que la Web 1.0 consistía en páginas web estáticas creadas en HTML, mientras que la Web 2.0 se caracteriza por sitios web dinámicos y participativos que aprovechan las redes sociales y el contenido generado por los usuarios, como blogs, wikis y plataformas de compartir videos y fotos. También analiza los cambios en las tecnologías y modelos de negocio asociados con el paso de la Web 1.0 a
Homophobia burleson2
Nursing has traditionally been a female-dominated profession, which can present challenges for male nurses in terms of fitting into the established culture. However, as more men enter the nursing field, the culture is gradually becoming more inclusive and diverse. Overall, while some differences may exist, providing quality care for patients should be the top priority for all nurses regardless of their gender.
Carlos gardel
Carlos Gardel fue un cantante, compositor y actor de cine argentino considerado el más importante exponente del tango en la primera mitad del siglo XX, nació ya sea en Francia o Uruguay pero vivió desde niño en Buenos Aires, falleció en 1935 en un accidente aéreo en Colombia.
Seanayy.com..(4)
The document is a blog post that provides information about the music business and recommends reading the book "All You Need to Know About the Music Business". It also includes links to streaming music services, discusses public school education, and introduces an upcoming music producer. The blog aims to educate and inform aspiring artists about the industry.
La parrillada presentacion
ES UNA PRESENTACION EN LA CUAL PODRA ENCONTRA TODO LO QUE QUIERAS SABER SOBRE NUESTRO NEGOSIO Y NUESTROS PLATOS
Viewers also liked (15)
Similar to Microsoft word ns-1082.doc (1)
Inertia dynamic type fsb_specsheet
This document provides information about type FSB flange mounted spring applied brakes, including:
- Dimensions and specifications for various FSB brake models in 1-3 sentences.
- Instructions for proper hub positioning during assembly depending on the model.
- Tables with mechanical and electrical specifications like torque, weight, voltage, amps, and ohms for each model.
12777 coastal single pages part52
The document discusses various window locking products from Coastal Group including espagnolette bolts, mushroom bolts, and the easyPilot Duplex locking system from Winkhaus. The espagnolette bolts and mushroom bolts are made from stainless steel and provide lifetime operation in coastal areas. The easyPilot Duplex locking system has up to 6 locking points, a robust central gearbox for smooth operation, and opposing steel mushrooms that lock into keeps on both sides for high security in casement windows.
Lintech 100 110_120_catalog
LINTECH's 100 and 110 series positioning tables offer precision performance for motion control applications. They use a low friction, preloaded, recirculating linear ball bearing system on precision ground linear rails mounted to an aluminum base, providing a rigid support. A variety of screw and motor options can be selected. Accessories like encoders, switches, and covers provide additional functionality. Specifications include load capacities, travel distances, speeds and other performance details.
Electromotor catalogue
The document provides an overview of MA series aluminum triphase squirrel cage induction motors. Key details include:
- Frame sizes range from 56-132. Output ranges from 0.06-18.5Kw at 50Hz. Motors are IP55 protection class with insulation grade F.
- Performance data is provided for 2 pole motors ranging from 0.09Kw to 11Kw in output. Data includes full load current, efficiency, power factor, and temperature rise.
- An exploded view diagram shows the main components including the frame, end shields, bearings, stator, and rotor.
- Intended applications include common machinery that has no special requirements, like reducers, pumps, and food
Sy series multiple cylinder hydraulic cone crusher
The document provides installation and maintenance instructions for SY series cone crushers. It describes the crusher components and operating principles in 3 pages, then discusses installation requirements and procedures over 7 pages. The crusher has hydraulic adjustment and clearing systems to control the discharge opening size and remove tramp iron. Detailed diagrams and tables show component weights, installation dimensions, and the steps for installing parts like the frame, drive shaft, pulley, eccentric sleeve, and bushing. Maintaining proper alignment and clearances during installation is emphasized.
SEW Power Presses: SNX Serese Power Press Brochure
This document provides specifications for a line of precision power presses called SNX presses. It includes details on features like reduced noise and vibrations, high rigidity frames, precision forming for long die life, pneumatic clutches and brakes, gear transmissions, and hydraulic overload safety. Dimensional specifications are provided for each press model ranging from 35 to 250 tonnes. Accessories include electric motors and control panels, PLC interfaces, lubrication systems, safety devices, and quick die change systems.
SPEEDFLOOR
SPEEDFLOOR, the unique suspended concrete flooring system, is an innovation in the building industry. So quick and easy to install,
SPEEDFLOOR is a lightweight, cost-effective system that's perfect for multi-storey buildings and carparks. Whether it's one storey or fifteen,
the recipe is very simple. take sufficient quantity of SPEEDFLOOR, add structural steel or concrete supports, mix concrete and pourlAt the
heart of the system is a specially rollformed, galvanised steel joist that offers all the benefits of an open-webbed truss system at a more
enough to be man- handled into place, reducing cranaage costs. Services are easily accommodated through the joists which are delivered to
the site ready to install. SPEEDFLOOR The perfectly simple, simply perfect solution to multi-storey construction.
SYS II_Presentation
This document lists parts and components for various systems and pieces of equipment used in a continuous casting and breakdown, roughing, and finishing mills process. It includes rollers, machine parts, gearboxes, and rolls for 9 stands across the different systems. The parts are identified by manufacturer part numbers.
Lintech 130series 140series_specsheet
The document provides information on the 130 and 140 series positioning tables from Lintech, including:
- The 130 series offers precision performance for a wide range of motion control applications and includes options like various screw types, encoder mounts, and safety switches.
- Features of the 130 series include a low friction linear ball bearing system, precision machined aluminum construction, and a variety of screw and motor options.
- The document provides detailed specifications, dimensions, load capacities, and an ordering guide for selecting the proper 130 series table configuration.
GRA200 Jingdiao High Speed Machining Center
The document summarizes a 5-axis high speed machining center called the GRA200. It can achieve high precision machining with 0.1um feeding and 1um accuracy. It features full closed-loop control, various spindle options, an automatic tool inspection system, and on-machine measurement. It is suitable for die/mold machining and provides examples of complex medical and optical parts it can machine. The document also describes the machine's structure, cooling system, precision spindle options, CNC control system, tool magazine options, and remote monitoring capabilities.
2011 Kawasaki Z1000SX
The document provides information on the 2011 Kawasaki Z1000SX motorcycle model. It includes details on the key features such as the seductive supersport styling, exciting engine with 101.5 kW of power, sporty chassis with inverted front fork and radial-mount brakes, and everyday versatility with a relaxed riding position and large 19L fuel tank. Color options are Candy Lime Green or Ebony.
Lintech 150series catalog
The document provides information on LINTECH's 150 series positioning tables, including:
- They offer precision performance for motion control applications, with travel lengths from 6-62 inches and options for acme screws, ball screws, waycovers, and multiple axis configurations.
- Key features include a low friction, preloaded, recirculating linear ball bearing system on precision ground linear rails mounted to an aluminum base, with a machined aluminum carriage and stainless steel inserts.
- Available options include EOT and home switches, linear and rotary encoders, power-off electric brakes, motor mounts, and couplings.
Smart Machine Tool - Milling Series
The document describes the SM Series of high performance machining centers from Smart Machine Tool. It provides specifications for several models including the SM 212/312/412/316, SM 600/1000, and SM 965/1165/1365/1565/1575. Key features highlighted include box way construction, spindle configurations with up to 12,000 rpm, tool changers with 24-40 tools, rigid machine structures, and chip removal systems.
Lintech 250series catalog
The document provides specifications for LINTECH's 250 series positioning tables. The tables offer precision performance for motion control applications, with options for different screw types, motor mounts, encoders, and switches. Key features include a low friction linear ball bearing system, precision ground rails, and rigid aluminum bases and carriages. Travel lengths range from 6 to 56 inches. Load capacities, speeds, and other technical specifications are provided.
35 13 drive pinion & hollow shaft assembly
This document provides instructions for disassembling and assembling a drive pinion and hollow shaft. It lists the special tools required and identifies each component by number. For many components, it provides figures illustrating how to remove and install the parts, with notes about heating, pressing, or checking clearances. It also includes information on adjusting components and determining the proper circlip thickness.
Harmonic fb specshseet
This document provides information about harmonic drive gearing components and their specifications. It describes the basic components of the harmonic drive gear set, which includes the wave generator, flexspline, circular spline, and dynamic spline. It also provides typical installation diagrams and ordering information examples. Performance ratings including torque, speed, backlash, and efficiency characteristics are outlined for various gear set sizes.
Ray am hafele
This document provides information about undermounted concealed and single extension soft closing runners from Hafele including installation instructions, drilling patterns, dimensions, load bearing capacities up to 30 kg, lengths available from 300 to 550 mm, and catalog numbers with prices in VND. specifications are subject to change without notice. The runners are for internal use only.
Lintech 160 170_180series_catalog
This document provides specifications for LINTECH's 160 and 170 series positioning tables. It describes the standard features such as compact size, recirculating linear ball bearing system, precision ground rails, and end of travel and home switches. It lists available options like various screw types, encoder options, motor mounts, and covers. The ordering guide provides information on how to select options to configure a positioning table with a 6 inch carriage. The document concludes with load capacity charts and additional specifications for the 160 series tables.
catalogue FLED-SENSOR-DIMMING.pdf
Manufacture of high Quality LED
Industrial Lighting Fittings
FLED - [Flat Fluorescent Film Light Source]
FLED UFO high bay light ……………………………….01-05
Flat FLED street light ……………………………………06-07
FLED flood light …………………………………………08-10
FLED fish attraction light ………………………………..11-12
FLED strip light ………………………………………….13-18
FLED corn light ………………………………………….19-20
Xhnotion air cylinder 2016
this catalogue includes DNC air cylinder, SC pneumatic cylinder, ISO6431, ISO6432 cylinder, compact air cylinder, miniature cylinder, cylinder kits, barrels, piston, installing accessories
Similar to Microsoft word ns-1082.doc (1) (20)
Sy series multiple cylinder hydraulic cone crusher
Sy series multiple cylinder hydraulic cone crusher
SEW Power Presses: SNX Serese Power Press Brochure
SEW Power Presses: SNX Serese Power Press Brochure
Recently uploaded
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
The Fourth Industrial Revolution is transforming industries, including healthcare, by integrating digital,
physical, and biological technologies. This study examines the integration of 4.0 technologies into
healthcare, identifying success factors and challenges through interviews with 70 stakeholders from 33
countries. Healthcare is evolving significantly, with varied objectives across nations aiming to improve
population health. The study explores stakeholders' perceptions on critical success factors, identifying
challenges such as insufficiently trained personnel, organizational silos, and structural barriers to data
exchange. Facilitators for integration include cost reduction initiatives and interoperability policies.
Technologies like IoT, Big Data, AI, Machine Learning, and robotics enhance diagnostics, treatment
precision, and real-time monitoring, reducing errors and optimizing resource utilization. Automation
improves employee satisfaction and patient care, while Blockchain and telemedicine drive cost reductions.
Successful integration requires skilled professionals and supportive policies, promising efficient resource
use, lower error rates, and accelerated processes, leading to optimized global healthcare outcomes.
Recently uploaded (20)
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Microsoft word ns-1082.doc (1)
- 1. S130/190 Live Head Apr. 2007, issue 001 1 All specifications are current as of this printing, but are subject to change SPECIFICATIONS McCloskey S130/190 Live Head
- 2. S130/190 Live Head Apr. 2007, issue 001 2 All specifications are current as of this printing, but are subject to change DESCRIPTION Heavy duty Live Head with following features: - Double deck Live Head. - Heavy duty screen bearings. - Side plates fold for transport to lower overall height. - Hydraulic angle adjustment. - Heavy duty Hardox bofor top deck screens - End tensioned mesh bottom deck. - Independent mounting frame to attach direct to S Series machines. SPECIFICATIONS Dimensions - top deck 2150mm x 3200mm (7' x 10.5') Dimensions - bottom deck 1930mm x 3200mm (6.3' x 10.5') Bearing type NSK 110mm bore Screens - top deck 7' x 5.25' bolted direct to frame Screens - bottom deck 6.3' x 5.25' end tension - 2 off Tensioning - top deck Direct bolted to frame Tensioning - bottom deck Clamp and bolts. Screen angle 10 to 20 deg Screen motor (S190) DBH MCC2213 (85.7cc/rev) Screen motor (S130) DBH MCC2208 (58.9cc/rev) Drive system Direct drive with HRC180 coupling Hydraulic flowrate (S190) 101.2 Lpm (26.7 US gpm) Hydraulic flowrate (S130) 72.6 Lpm (19.2 US gpm) Speed adjustable YES - Pressure compensated FCV Screen stroke 5 - 6mm Screen shaft speed 1030-1050 rpm Screen 'g' force 4.29 g Feed height - Track maximum (20 deg) 4022mm Feed height - Track minimum (10 deg) 3687mm Feed height - Wheel maximum (20 deg) 4282mm Feed height - Wheel minimum (10 deg) 3947mm OPTIONS Top deck punch plate Bottom deck punch plate Single deck (no bottom deck frame structure fitted)
- 3. S130/190 Live Head Apr. 2007, issue 001 3 All specifications are current as of this printing, but are subject to change