Mewp pictures google search
•
1 like•478 views
This document appears to be a search page with sections for images, maps, shopping, and more as well as a search bar and tools. It mentions cookies are used to deliver services and provides options to learn more about privacy and terms or switch to a basic version.
Report
Share
Report
Share
Download to read offline
Recommended
Get the right MEWP for the job
This document provides an overview of powered access equipment and best practices for their safe use. It discusses the benefits of powered access equipment for working at heights, relevant legislation and safety advice. It also covers choosing the appropriate equipment for the job, operator training requirements, familiarization with specific models, and accident procedures. The document emphasizes assessing risks, having the right equipment for the task, and ensuring operators are properly trained.
Sfpsg best-practice-guide-for-mew ps-100715-4a
This document provides guidance on avoiding trapping and crushing injuries to people in MEWP (mobile elevating work platforms) baskets. It is aimed at planners, managers and trainers. Part 1 discusses hazards, risk assessment, MEWP selection, emergency planning, training requirements, and supervision. The annexes provide more detail on typical hazards at different stages of work and important factors to consider in planning, risk assessment, and MEWP selection to minimize trapping risks. The guidance emphasizes task-specific risk assessment and control measures to prevent accidents.
E20815
This document provides guidance on exiting mobile elevating work platforms (MEWPs) at height. It states that MEWPs are designed to lift people safely within the platform and not for transferring between levels. Exiting the platform should only be done at ground level or on the chassis. In exceptional cases, exiting at height may be allowed if a risk assessment shows it is the safest method and part of an emergency plan. Employers must ensure exiting at height is addressed in safety procedures and training before being done. A site-specific risk assessment should also be conducted to identify and mitigate all risks.
Mobile crane
This document provides an overview of mobile crane regulations around the world. It discusses the parts of mobile cranes including the chassis/base, upperworks, swing mechanism, and parameters considered for safe operation. Load charts and duty charts are described which specify the rated capacity of cranes under different configurations. Factors that influence safe working like ground conditions, wind, electricity hazards and multi-crane lifts are also covered.
Environmental ppt gshp ashp
This document provides an overview of heat pump systems, including:
- Heat pumps use a refrigeration cycle to convert low temperature heat to higher temperature heat.
- Common heat sources are air, ground, and water. Suitable emitters include underfloor heating and tank-in-tank water cylinders.
- Heat pumps can provide 300-500% more energy output than electrical input, with efficiencies described as Coefficient of Performance.
Br pdf ad_p_2013
This document provides guidance on electrical safety in dwellings as required by Part P of the Building Regulations. It outlines the technical requirements for electrical work in dwellings, defines the scope of Part P and what work is considered notifiable, and describes the certification, inspection and testing processes for electrical work.
Br pdf ad_j_2010_v2
This document provides guidance on complying with regulations related to combustion appliances and fuel storage systems in England and Wales. It covers requirements for air supply, flues, hearths, protection from fire, warning of carbon monoxide release, and liquid fuel storage. The document gives guidance on materials, ventilation, construction methods, installation, and other provisions to ensure appliances are safely installed and operated. It also outlines the responsibilities of those involved in building work and provides checklists and examples to demonstrate compliance.
Br pdf ad_h_2010
This document provides guidance on the Building Regulations 2010 concerning drainage and waste disposal in the United Kingdom. It outlines the key requirements for foul water drainage systems, wastewater treatment systems, rainwater drainage, building over sewers, and solid waste storage. The guidance covers topics such as pipe layout and sizing, pumping installations, protection from settlement, materials, testing, and maintenance of drainage systems. It also addresses repairs and alterations to existing drains and connection to public sewer systems.
Recommended
Get the right MEWP for the job
This document provides an overview of powered access equipment and best practices for their safe use. It discusses the benefits of powered access equipment for working at heights, relevant legislation and safety advice. It also covers choosing the appropriate equipment for the job, operator training requirements, familiarization with specific models, and accident procedures. The document emphasizes assessing risks, having the right equipment for the task, and ensuring operators are properly trained.
Sfpsg best-practice-guide-for-mew ps-100715-4a
This document provides guidance on avoiding trapping and crushing injuries to people in MEWP (mobile elevating work platforms) baskets. It is aimed at planners, managers and trainers. Part 1 discusses hazards, risk assessment, MEWP selection, emergency planning, training requirements, and supervision. The annexes provide more detail on typical hazards at different stages of work and important factors to consider in planning, risk assessment, and MEWP selection to minimize trapping risks. The guidance emphasizes task-specific risk assessment and control measures to prevent accidents.
E20815
This document provides guidance on exiting mobile elevating work platforms (MEWPs) at height. It states that MEWPs are designed to lift people safely within the platform and not for transferring between levels. Exiting the platform should only be done at ground level or on the chassis. In exceptional cases, exiting at height may be allowed if a risk assessment shows it is the safest method and part of an emergency plan. Employers must ensure exiting at height is addressed in safety procedures and training before being done. A site-specific risk assessment should also be conducted to identify and mitigate all risks.
Mobile crane
This document provides an overview of mobile crane regulations around the world. It discusses the parts of mobile cranes including the chassis/base, upperworks, swing mechanism, and parameters considered for safe operation. Load charts and duty charts are described which specify the rated capacity of cranes under different configurations. Factors that influence safe working like ground conditions, wind, electricity hazards and multi-crane lifts are also covered.
Environmental ppt gshp ashp
This document provides an overview of heat pump systems, including:
- Heat pumps use a refrigeration cycle to convert low temperature heat to higher temperature heat.
- Common heat sources are air, ground, and water. Suitable emitters include underfloor heating and tank-in-tank water cylinders.
- Heat pumps can provide 300-500% more energy output than electrical input, with efficiencies described as Coefficient of Performance.
Br pdf ad_p_2013
This document provides guidance on electrical safety in dwellings as required by Part P of the Building Regulations. It outlines the technical requirements for electrical work in dwellings, defines the scope of Part P and what work is considered notifiable, and describes the certification, inspection and testing processes for electrical work.
Br pdf ad_j_2010_v2
This document provides guidance on complying with regulations related to combustion appliances and fuel storage systems in England and Wales. It covers requirements for air supply, flues, hearths, protection from fire, warning of carbon monoxide release, and liquid fuel storage. The document gives guidance on materials, ventilation, construction methods, installation, and other provisions to ensure appliances are safely installed and operated. It also outlines the responsibilities of those involved in building work and provides checklists and examples to demonstrate compliance.
Br pdf ad_h_2010
This document provides guidance on the Building Regulations 2010 concerning drainage and waste disposal in the United Kingdom. It outlines the key requirements for foul water drainage systems, wastewater treatment systems, rainwater drainage, building over sewers, and solid waste storage. The guidance covers topics such as pipe layout and sizing, pumping installations, protection from settlement, materials, testing, and maintenance of drainage systems. It also addresses repairs and alterations to existing drains and connection to public sewer systems.
Br pdf ad_g_2010_v2
This document provides information about The Building Regulations 2010 Approved Document G: Sanitation, hot water safety and water efficiency. It outlines where copies of the Approved Document can be purchased. It also summarizes some of the main changes made in the 2010 edition compared to previous editions, including new requirements for water efficiency in dwellings, enhanced provisions for hot water supply safety, and requirements for sanitary conveniences and washing facilities. The document notes that the 2010 edition incorporates further amendments made in the same year.
Br pdf ad_f_2010_v2
This document summarizes the main changes to the Building Regulations 2010 regarding ventilation requirements. The key changes include new requirements for commissioning and air flow testing of mechanical ventilation systems, providing information to building owners on system maintenance, and increased ventilation provisions for very airtight dwellings. Technical guidance was also updated, including increasing the minimum passive stack ventilator size, clarifying ventilation when bathrooms/kitchens are refurbished, and referencing a new domestic ventilation compliance guide.
Br pdf ad_l1_a_2010_v2
This document summarizes The Building Regulations 2010 document. It contains 3 key points:
1) It provides guidance on complying with the energy efficiency requirements and regulation 7 of the Building Regulations 2010 for England and Wales. This includes requirements for new dwellings to meet targets for limiting carbon dioxide emissions.
2) It describes the general provisions, including definitions, types of work covered, exemptions, methods of demonstrating compliance, and notifying building work.
3) It outlines 5 criteria for achieving compliance: 1) meeting carbon dioxide emission rate targets, 2) following limits for building fabric and system efficiencies, 3) limiting solar gain in summer, 4) ensuring building performance is consistent with specifications, and 5)
_rain_and_greywater
The document discusses rainwater harvesting and greywater reuse systems. It describes how rainwater harvesting collects rainwater from roofs to use for non-potable purposes like gardening and flushing toilets in order to reduce water usage. Greywater reuse systems collect wastewater from laundry, dishwashing, and bathing for similar non-potable reuse after treatment. The document covers installation considerations and regulations for setting up these types of environmental technology systems.
Environmental legislation powerpoint
The document discusses several UK environmental protection acts and regulations:
- The Environmental Protection Act 1990 defines the structure for waste management and emissions control. It covers waste disposal, contaminated land, and genetically modified organisms.
- The Hazardous Waste Regulations aim to reduce hazardous waste generation and properly manage such waste.
- The Pollution Prevention and Control Act 1999 controls industries that emit significant pollution to all environmental media.
- The Waste Electrical and Electronic Equipment Regulations require proper treatment and disposal of electronic waste without environmental harm.
Rain and Greywater
This document provides information on rainwater harvesting and greywater reuse systems. It discusses the basic principles of how these systems work to collect and store rainwater and greywater for non-potable uses. The document also outlines the key regulatory requirements and installation considerations for these systems in the UK, as well as typical advantages and disadvantages.
Hydro
This document discusses micro-hydroelectric power systems. It explains that small-scale hydropower can provide clean electricity generation for homes using flowing water from streams or rivers. The key components of a micro-hydro system are described, including an intake, penstock, turbine, generator, and tailrace. Equations are provided to calculate the mechanical and electrical power output based on factors like flow rate, head, and system efficiencies. Advantages are reliable renewable energy without emissions, while disadvantages include high initial costs and limited expansion options.
Combine Heating and Power (chp)
Micro-CHP, or micro combined heat and power, is a technology that generates electricity and heat simultaneously for individual homes or buildings. It works by using a fuel like natural gas to power a system, such as a Stirling engine, to produce both electricity and hot water. Micro-CHP systems typically produce around 1kW of electricity and have a 6:1 ratio of heat to power output. Any excess electricity can be sold back to the grid. While not considered renewable, micro-CHP can reduce carbon emissions and energy costs when properly installed.
Wind Turbines
The document discusses micro wind technologies. It explains that micro wind turbines harness wind energy to generate electricity. It describes the basic workings of horizontal and vertical axis wind turbines. The document also outlines planning requirements, regulations, advantages such as feed-in tariffs, and disadvantages like inconsistent power generation from variable wind speeds.
Biomass
This document discusses biomass as an environmental technology system. It defines biomass as biological material derived from living or recently living organisms, including both plant and animal material. Biomass is a renewable, low-carbon fuel available in the UK that can provide environmental and social benefits if managed sustainably. Properly managed biomass can deliver significant carbon emission reductions compared to fossil fuels. The document also discusses biomass systems, considerations for biomass installations, building regulation requirements, advantages and disadvantages of biomass systems.
Streching questions pv
A photovoltaic system uses doped silicon semiconductors that generate electricity when exposed to light. N-type silicon has extra electrons added by doping, while P-type silicon has electron deficiencies added by doping. When joined together, the silicon types allow electrons to flow when struck by photons, generating electricity. A feeding tariff is a subsidy for solar power. An installer of a PV system would need qualifications in electrical work and safety procedures.
PV worksheet 1
Solar photovoltaic (PV) systems convert sunlight into electricity and require planning for optimal installation angles and orientation. An inverter in a solar PV system converts the variable direct current (DC) output of the solar panels into alternating current (AC) that can power homes or feed into electrical grids. Solar PV systems provide advantages such as reduced energy costs, reliability, and reduced environmental impact but also have disadvantages including high installation costs, dependence on sunlight, and limited storage capacity.
Photovoltaic systems
The document discusses solar photovoltaic (PV) systems, including how PV cells work by converting sunlight into electricity, how solar inverters convert the direct current from PV panels into alternating current, and considerations for installing a solar PV system such as suitable roof orientation and any planning or building regulation requirements. It also outlines advantages such as receiving feed-in tariffs for electricity exported to the grid and reducing carbon emissions, and disadvantages like needing a large unshaded south-facing roof area to maximize returns.
Air Source Heat Pumps
The document discusses air source heat pumps, which absorb heat from outside air to heat buildings. It explains that air source heat pumps extract heat from outside air using a refrigerant cycle, even when temperatures are as low as -15°C. The document also outlines the types of air source heat pump systems, how they work, considerations for installation location and planning, and the advantages and disadvantages of air source heat pumps.
Ground_Source Heat Pumps
Ground source heat pumps extract heat from the ground through a system of pipes or coils to heat buildings. They work like a refrigerator by using a compressor to move heat from one place to another. The heat pump unit is installed indoors while horizontal coils are buried underground to absorb heat from the ground. Ground source heat pumps have advantages like reduced running costs and emissions but require careful installation to work effectively.
Solar_Thermal
The document discusses solar thermal hot water systems, which use solar panels fitted to roofs or other surfaces to collect sunlight and heat water. It notes the main renewable energy sources for homes include sunlight, heat from the earth/air/water, biomass, waste, hydropower, and wind. Solar thermal systems can reduce energy bills and carbon footprint while providing hot water year-round, though they only work during the day and have high upfront costs. Proper installation requires checking the roof's structural ability to support panels and avoiding shaded areas, with some systems qualifying as permitted development under planning rules.
Abse lev1 2_101-201_launch(full permission)
The document discusses safe working practices in the construction industry. It covers UK health and safety laws like HASAWA, COSHH, CDM Regulations, and RIDDOR which aim to protect workers' health and safety. Employers have duties around risk assessments, personal protective equipment, and reporting accidents. Common construction accidents involve falls, electrocution, injuries from tools or debris. Signs are used to warn of hazards and mandatory safety procedures. Workers must follow conduct rules, use tools safely, and respond appropriately to hazardous situations.
Stepladder guide
This document provides guidance on safely using stepladders and ladders. It emphasizes selecting the right equipment for the job, inspecting for damage or defects, positioning safely with three points of contact and the correct angle, and avoiding overreaching. Standards are outlined for stepladder and ladder load ratings. Most accidents are caused by improper use rather than equipment failures. Safety is emphasized above all.
Indg163five steps to risk assessment
The document provides guidance on conducting a 5-step workplace risk assessment. It explains that a risk assessment identifies hazards, decides who may be harmed and how, evaluates risks and implements controls, records findings, and reviews the assessment. The 5 steps include identifying hazards, identifying those at risk, evaluating risks and controls, recording the assessment, and reviewing it periodically. The guidance stresses that risk assessment should be a practical process to focus on significant hazards and control risks in a way that is reasonable and proportionate to the risk.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
More Related Content
More from wirethehouse
Br pdf ad_g_2010_v2
This document provides information about The Building Regulations 2010 Approved Document G: Sanitation, hot water safety and water efficiency. It outlines where copies of the Approved Document can be purchased. It also summarizes some of the main changes made in the 2010 edition compared to previous editions, including new requirements for water efficiency in dwellings, enhanced provisions for hot water supply safety, and requirements for sanitary conveniences and washing facilities. The document notes that the 2010 edition incorporates further amendments made in the same year.
Br pdf ad_f_2010_v2
This document summarizes the main changes to the Building Regulations 2010 regarding ventilation requirements. The key changes include new requirements for commissioning and air flow testing of mechanical ventilation systems, providing information to building owners on system maintenance, and increased ventilation provisions for very airtight dwellings. Technical guidance was also updated, including increasing the minimum passive stack ventilator size, clarifying ventilation when bathrooms/kitchens are refurbished, and referencing a new domestic ventilation compliance guide.
Br pdf ad_l1_a_2010_v2
This document summarizes The Building Regulations 2010 document. It contains 3 key points:
1) It provides guidance on complying with the energy efficiency requirements and regulation 7 of the Building Regulations 2010 for England and Wales. This includes requirements for new dwellings to meet targets for limiting carbon dioxide emissions.
2) It describes the general provisions, including definitions, types of work covered, exemptions, methods of demonstrating compliance, and notifying building work.
3) It outlines 5 criteria for achieving compliance: 1) meeting carbon dioxide emission rate targets, 2) following limits for building fabric and system efficiencies, 3) limiting solar gain in summer, 4) ensuring building performance is consistent with specifications, and 5)
_rain_and_greywater
The document discusses rainwater harvesting and greywater reuse systems. It describes how rainwater harvesting collects rainwater from roofs to use for non-potable purposes like gardening and flushing toilets in order to reduce water usage. Greywater reuse systems collect wastewater from laundry, dishwashing, and bathing for similar non-potable reuse after treatment. The document covers installation considerations and regulations for setting up these types of environmental technology systems.
Environmental legislation powerpoint
The document discusses several UK environmental protection acts and regulations:
- The Environmental Protection Act 1990 defines the structure for waste management and emissions control. It covers waste disposal, contaminated land, and genetically modified organisms.
- The Hazardous Waste Regulations aim to reduce hazardous waste generation and properly manage such waste.
- The Pollution Prevention and Control Act 1999 controls industries that emit significant pollution to all environmental media.
- The Waste Electrical and Electronic Equipment Regulations require proper treatment and disposal of electronic waste without environmental harm.
Rain and Greywater
This document provides information on rainwater harvesting and greywater reuse systems. It discusses the basic principles of how these systems work to collect and store rainwater and greywater for non-potable uses. The document also outlines the key regulatory requirements and installation considerations for these systems in the UK, as well as typical advantages and disadvantages.
Hydro
This document discusses micro-hydroelectric power systems. It explains that small-scale hydropower can provide clean electricity generation for homes using flowing water from streams or rivers. The key components of a micro-hydro system are described, including an intake, penstock, turbine, generator, and tailrace. Equations are provided to calculate the mechanical and electrical power output based on factors like flow rate, head, and system efficiencies. Advantages are reliable renewable energy without emissions, while disadvantages include high initial costs and limited expansion options.
Combine Heating and Power (chp)
Micro-CHP, or micro combined heat and power, is a technology that generates electricity and heat simultaneously for individual homes or buildings. It works by using a fuel like natural gas to power a system, such as a Stirling engine, to produce both electricity and hot water. Micro-CHP systems typically produce around 1kW of electricity and have a 6:1 ratio of heat to power output. Any excess electricity can be sold back to the grid. While not considered renewable, micro-CHP can reduce carbon emissions and energy costs when properly installed.
Wind Turbines
The document discusses micro wind technologies. It explains that micro wind turbines harness wind energy to generate electricity. It describes the basic workings of horizontal and vertical axis wind turbines. The document also outlines planning requirements, regulations, advantages such as feed-in tariffs, and disadvantages like inconsistent power generation from variable wind speeds.
Biomass
This document discusses biomass as an environmental technology system. It defines biomass as biological material derived from living or recently living organisms, including both plant and animal material. Biomass is a renewable, low-carbon fuel available in the UK that can provide environmental and social benefits if managed sustainably. Properly managed biomass can deliver significant carbon emission reductions compared to fossil fuels. The document also discusses biomass systems, considerations for biomass installations, building regulation requirements, advantages and disadvantages of biomass systems.
Streching questions pv
A photovoltaic system uses doped silicon semiconductors that generate electricity when exposed to light. N-type silicon has extra electrons added by doping, while P-type silicon has electron deficiencies added by doping. When joined together, the silicon types allow electrons to flow when struck by photons, generating electricity. A feeding tariff is a subsidy for solar power. An installer of a PV system would need qualifications in electrical work and safety procedures.
PV worksheet 1
Solar photovoltaic (PV) systems convert sunlight into electricity and require planning for optimal installation angles and orientation. An inverter in a solar PV system converts the variable direct current (DC) output of the solar panels into alternating current (AC) that can power homes or feed into electrical grids. Solar PV systems provide advantages such as reduced energy costs, reliability, and reduced environmental impact but also have disadvantages including high installation costs, dependence on sunlight, and limited storage capacity.
Photovoltaic systems
The document discusses solar photovoltaic (PV) systems, including how PV cells work by converting sunlight into electricity, how solar inverters convert the direct current from PV panels into alternating current, and considerations for installing a solar PV system such as suitable roof orientation and any planning or building regulation requirements. It also outlines advantages such as receiving feed-in tariffs for electricity exported to the grid and reducing carbon emissions, and disadvantages like needing a large unshaded south-facing roof area to maximize returns.
Air Source Heat Pumps
The document discusses air source heat pumps, which absorb heat from outside air to heat buildings. It explains that air source heat pumps extract heat from outside air using a refrigerant cycle, even when temperatures are as low as -15°C. The document also outlines the types of air source heat pump systems, how they work, considerations for installation location and planning, and the advantages and disadvantages of air source heat pumps.
Ground_Source Heat Pumps
Ground source heat pumps extract heat from the ground through a system of pipes or coils to heat buildings. They work like a refrigerator by using a compressor to move heat from one place to another. The heat pump unit is installed indoors while horizontal coils are buried underground to absorb heat from the ground. Ground source heat pumps have advantages like reduced running costs and emissions but require careful installation to work effectively.
Solar_Thermal
The document discusses solar thermal hot water systems, which use solar panels fitted to roofs or other surfaces to collect sunlight and heat water. It notes the main renewable energy sources for homes include sunlight, heat from the earth/air/water, biomass, waste, hydropower, and wind. Solar thermal systems can reduce energy bills and carbon footprint while providing hot water year-round, though they only work during the day and have high upfront costs. Proper installation requires checking the roof's structural ability to support panels and avoiding shaded areas, with some systems qualifying as permitted development under planning rules.
Abse lev1 2_101-201_launch(full permission)
The document discusses safe working practices in the construction industry. It covers UK health and safety laws like HASAWA, COSHH, CDM Regulations, and RIDDOR which aim to protect workers' health and safety. Employers have duties around risk assessments, personal protective equipment, and reporting accidents. Common construction accidents involve falls, electrocution, injuries from tools or debris. Signs are used to warn of hazards and mandatory safety procedures. Workers must follow conduct rules, use tools safely, and respond appropriately to hazardous situations.
Stepladder guide
This document provides guidance on safely using stepladders and ladders. It emphasizes selecting the right equipment for the job, inspecting for damage or defects, positioning safely with three points of contact and the correct angle, and avoiding overreaching. Standards are outlined for stepladder and ladder load ratings. Most accidents are caused by improper use rather than equipment failures. Safety is emphasized above all.
Indg163five steps to risk assessment
The document provides guidance on conducting a 5-step workplace risk assessment. It explains that a risk assessment identifies hazards, decides who may be harmed and how, evaluates risks and implements controls, records findings, and reviews the assessment. The 5 steps include identifying hazards, identifying those at risk, evaluating risks and controls, recording the assessment, and reviewing it periodically. The guidance stresses that risk assessment should be a practical process to focus on significant hazards and control risks in a way that is reasonable and proportionate to the risk.
More from wirethehouse (20)
Recently uploaded
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
20 Comprehensive Checklist of Designing and Developing a Website
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsUni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Recently uploaded (20)
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
20 Comprehensive Checklist of Designing and Developing a Website
20 Comprehensive Checklist of Designing and Developing a Website
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Mewp pictures google search
- 1. mewp pictures Web Images +Niel Maps Shopping More Search tools Cookies help us deliver our services. By using our services, you agree to our use of cookies. OK Learn more 285 × 402 - hse.gov.uk Share SafeSearch
- 8. Help Send feedback Privacy & Terms Switch to basic version