Me2036 PRODUCTION PLANNING AND CONTROL
•
0 likes•137 views
This document contains a question paper for a mechanical engineering degree examination on production planning and control. It consists of two parts: Part A contains 10 short answer questions worth 2 marks each, covering topics like objectives of production planning, break even analysis, time study steps, value analysis, product planning, perpetual loading, product sequencing, advantages of two bin systems, and just-in-time (JIT). Part B contains 5 long answer questions worth 16 marks each, asking examinees to discuss benefits of production planning and control (PPC), compare batch and continuous production, explain product development and design, discuss work study steps, explain process planning steps, describe problems due to lack of product planning, analyze process capabilities in
Report
Share
Report
Share
Download to read offline
Recommended
Mf5102 computer-integrated-manufacturing-systems 1
This document contains questions from a Manufacturing Engineering exam on Computer Integrated Manufacturing Systems. It covers topics like CAD, CAM, CIM, FMS, material handling systems, production monitoring systems, lean vs agile manufacturing, and more. Students are asked questions involving definitions, explanations, comparisons, case studies, and calculations related to these manufacturing topics. The exam aims to test the students' understanding of key concepts and applications of computer integrated manufacturing.
171811 2171903-cam
Gujrat Technology University Exam Paper to help student for the preparation of Exam. Computer Aided Manufacturing subject. It is 7th semester subject
BPR (May - 2018) [IDOL: Old Course | Question Paper]
BPR (May - 2018) [IDOL: Old Course | Question Paper]
May - 2018, question papers, old question paper, mumbai university, bscit, tybscit, tybscit semester v, semester v question paper, old course, semester v old course, old course question paper, mumbai university old course, Internet Security, SQL - 2, Visual Basic - 6, Elective - I, Advanced Java, Embedded Systems And Programming, Multimedia, Web Design and Internet Based Applications, Elective - II, BPR, ERP Systems, GIS, Management Information Systems
Ie6605 PRODUCTION PLANNING AND CONTROL
This document appears to be an exam for a Production Planning and Control course. It contains three parts - Part A has 10 short answer questions, Part B has 5 long answer questions, and Part C has 2 essay questions to choose from. The questions cover a wide range of topics related to production planning and control, including the phases of PPC, factors affecting production planning, process planning functions, work study procedures, scheduling techniques, inventory control methods, and time and motion studies. The document provides an exam for students to demonstrate their understanding of key concepts and methods for production planning and control.
X10884 (omf551)
This document outlines the structure and content of an examination for a Product Design and Development course. It contains 3 parts (A, B, C) with multiple choice and long answer questions. Part A contains 10 short answer questions about issues to consider in project/product design, concept selection benefits, product performance estimation, concept generation approaches, product architecture establishment, industrial design needs, and design for manufacturing guidelines. Part B contains 3 long answer questions about product development processes, concept generation methods, and product architecture types and implications. Part C contains 1 long answer question about concept selection and generation methods.
Operations management presentations
This document outlines presentation topics and evaluation rules for an Operations Management presentation assignment for an MBA semester 1 class. It lists 34 potential presentation topics related to operations management concepts. It also provides rules for the presentation, including a 10 minute time limit per group, the option for groups to use examples, individual evaluation of members, and which MBA cohorts will present on specific dates. Finally, it outlines how the 30 point presentation will be evaluated, with scoring allocated to clarity, communication skills, body language, time management, and response to audience questions.
Robust Information Exchanges For BIM
This document discusses building information modeling (BIM) tools and data formats. It includes the following:
1. A table listing various BIM tools for massing, design, construction management, cost estimation, structural analysis, and energy analysis.
2. A table listing common 3D surface/shape and 3D object file formats used for BIM such as OBJ, IFC, STP.
3. A diagram showing how different engineers and building professionals can collaborate using a shared IFC model during design and construction.
Reverse engineering of gui models
The document presents a reverse engineering approach and tool called REGUI to generate a formal model from a graphical user interface (GUI) application. The approach uses static and dynamic analysis to extract structural information, navigation steps, and behavior from the GUI. It involves three phases: 1) automatically exploring the GUI to obtain structural information and navigation steps, 2) inferring dependencies between GUI elements, and 3) generating a Spec# model representing the GUI. A case study of applying the approach to a notepad application is also presented. The tool aims to reduce the effort required to construct GUI models for testing purposes.
Recommended
Mf5102 computer-integrated-manufacturing-systems 1
This document contains questions from a Manufacturing Engineering exam on Computer Integrated Manufacturing Systems. It covers topics like CAD, CAM, CIM, FMS, material handling systems, production monitoring systems, lean vs agile manufacturing, and more. Students are asked questions involving definitions, explanations, comparisons, case studies, and calculations related to these manufacturing topics. The exam aims to test the students' understanding of key concepts and applications of computer integrated manufacturing.
171811 2171903-cam
Gujrat Technology University Exam Paper to help student for the preparation of Exam. Computer Aided Manufacturing subject. It is 7th semester subject
BPR (May - 2018) [IDOL: Old Course | Question Paper]
BPR (May - 2018) [IDOL: Old Course | Question Paper]
May - 2018, question papers, old question paper, mumbai university, bscit, tybscit, tybscit semester v, semester v question paper, old course, semester v old course, old course question paper, mumbai university old course, Internet Security, SQL - 2, Visual Basic - 6, Elective - I, Advanced Java, Embedded Systems And Programming, Multimedia, Web Design and Internet Based Applications, Elective - II, BPR, ERP Systems, GIS, Management Information Systems
Ie6605 PRODUCTION PLANNING AND CONTROL
This document appears to be an exam for a Production Planning and Control course. It contains three parts - Part A has 10 short answer questions, Part B has 5 long answer questions, and Part C has 2 essay questions to choose from. The questions cover a wide range of topics related to production planning and control, including the phases of PPC, factors affecting production planning, process planning functions, work study procedures, scheduling techniques, inventory control methods, and time and motion studies. The document provides an exam for students to demonstrate their understanding of key concepts and methods for production planning and control.
X10884 (omf551)
This document outlines the structure and content of an examination for a Product Design and Development course. It contains 3 parts (A, B, C) with multiple choice and long answer questions. Part A contains 10 short answer questions about issues to consider in project/product design, concept selection benefits, product performance estimation, concept generation approaches, product architecture establishment, industrial design needs, and design for manufacturing guidelines. Part B contains 3 long answer questions about product development processes, concept generation methods, and product architecture types and implications. Part C contains 1 long answer question about concept selection and generation methods.
Operations management presentations
This document outlines presentation topics and evaluation rules for an Operations Management presentation assignment for an MBA semester 1 class. It lists 34 potential presentation topics related to operations management concepts. It also provides rules for the presentation, including a 10 minute time limit per group, the option for groups to use examples, individual evaluation of members, and which MBA cohorts will present on specific dates. Finally, it outlines how the 30 point presentation will be evaluated, with scoring allocated to clarity, communication skills, body language, time management, and response to audience questions.
Robust Information Exchanges For BIM
This document discusses building information modeling (BIM) tools and data formats. It includes the following:
1. A table listing various BIM tools for massing, design, construction management, cost estimation, structural analysis, and energy analysis.
2. A table listing common 3D surface/shape and 3D object file formats used for BIM such as OBJ, IFC, STP.
3. A diagram showing how different engineers and building professionals can collaborate using a shared IFC model during design and construction.
Reverse engineering of gui models
The document presents a reverse engineering approach and tool called REGUI to generate a formal model from a graphical user interface (GUI) application. The approach uses static and dynamic analysis to extract structural information, navigation steps, and behavior from the GUI. It involves three phases: 1) automatically exploring the GUI to obtain structural information and navigation steps, 2) inferring dependencies between GUI elements, and 3) generating a Spec# model representing the GUI. A case study of applying the approach to a notepad application is also presented. The tool aims to reduce the effort required to construct GUI models for testing purposes.
[Question Paper] Advanced SQL (Revised Course) [April / 2014]
This is a Question Papers of Mumbai University for B.Sc.IT Student of Semester - III [Advanced SQL] (Revised Course). [Year - April / 2014] . . .Solution Set of this Paper is Coming soon...
R09 operations research
The document is an exam paper for an Operations Research course. It contains 8 questions related to topics like linear programming, transportation problem, shortest path problem, and geometric programming. The first question formulates an LPP model to determine the production quantities of 3 products to maximize profit given constraints on raw materials and demand. It asks the candidate to solve the model using the Simplex method.
[Question Paper] BPR (Old Syllabus) [April / 2013]
This is a Question Papers of Mumbai University for B.Sc.IT Student of Semester - V [BPR] (Old Syllabus). [Year - April / 2013] . . . Solution Set of this Paper is Coming soon . . .
One marks of entrepreneurial development
The document contains 10 multiple choice questions about project feasibility analysis terms and processes. These include defining a feasibility analysis, the difference between project formulation and a detailed project report, that techno-economic analysis estimates project demand potential, that network analysis identifies optimal courses of action, and that a project profile includes economic size, capital cost and profitability. It also asks about the time period for a financial profitability statement, that project objectives should be realistic and attainable, that desk research identifies projects, and identifies the network analysis system developed by the British Atomic Energy Authority as PERT. The final question asks about computing the social impact of a project in a cost benefit analysis by estimating social costs and benefits.
Project Management (April – 2015) [Question Paper | IDOL: Revised Course]
Project Management (April – 2015) [Question Paper | IDOL: Revised Course]
april - 2017, april - 2016, april - 2015, april - 2014, april - 2013, october - 2017, october - 2016, october - 2015, october - 2014, may - 2016, may - 2017, december - 2017, 75:25 pattern, 60:40 pattern, revised course, old course, mumbai bscit study, mumbai university, bscit semester vi, bscit question paper, old question paper, previous year question paper, semester vi question paper, question paper, CBSGS, IDOL, kamal t, internet technology, digital signals and systems, data warehousing, ipr and cyber laws, project management, geographic information system
Project Management (December - 2018) [IDOL - Revised Course]
Project Management (December - 2018) [IDOL - Revised Course]
.
bscit, bscit question paper, bscit question papers 2018, bscit semester vi, bscit smester 6 2018, cbsgs, cbsgs 75-25 pattern, may – 2018, mumbai university bscit, mumbai university question papers, project management cbsgs 2018, project management may - 2018, project management question paper, question paper, tybscit
ASP.NET With C# (May – 2018) [IDOL: Revised Course | Question Paper]
This document is a question paper for the ASP.NET with C# course for semester 5 of the B.Sc. IT program. It contains 7 sections with a total of 27 multiple choice and descriptive questions worth 100 marks. The questions cover topics like C# concepts, Windows forms, ASP.NET controls and features, ADO.NET, jQuery, web services and more. Students are instructed to answer 15 out of the 27 questions in detail within the allotted time of 3 hours.
Data Warehousig (Question Paper) [May – 2018 | CBSGS - 75:25 Pattern]
Q.1 ATTEMPT ANY TWO QUESTIONS: (10 MARKS)
(A) Differentiate between OLTP Database and Data Warehouse Database.
(B) Write a short note on Dimensional Model.
(C) Explain the different types of developing strategies to be considered before developing a Data Warehouse.
(D) Define Data Warehouse. Explain its characteristics.
Q.2 ATTEMPT ANY TWO QUESTIONS: (10 MARKS)
(A) What is a Design Center? Explain the three main windows of it.
(B) Explain with the help of diagram OWB Components and Architecture.
(C) List and explain the steps to configure the Repository and Workspace.
(D) What is a Module? Write the steps to create Oracle Database Module.
Q.3 ATTEMPT ANY TWO QUESTIONS: (10 MARKS)
(A) Explain the different tabs of the Cube Editor in the Data Object Editor.
(B) Write a note on OWB Design Objects.
(C) Explain the four characteristics that have to be defined for every Dimension.
(D) Write the steps to create a Time Dimension using Time Dimension Wizard.
Q.4 ATTEMPT ANY TWO QUESTIONS: (10 MARKS)
(A) What is Staging? Explain the factors on which staging depends.
(B) Define Constraint. Explain types of Constraints.
(C) Explain any five Source and Target Operators.
(D) What is ETL? Explain the Manual ETL process.
Q.5 ATTEMPT ANY TWO QUESTIONS: (10 MARKS)
(A) What is Validation? Explain the process of validation in Design Center.
(B) Explain any three Transformation Operators.
(C) Explain the three main Default Operating Modes of a Mapping.
(D) Explain the features and benefits of Oracle Warehouse Builder.
Q.6 ATTEMPT ANY TWO QUESTIONS: (10 MARKS)
(A) Explain the term Data Sparsity and Data Explosion with example.
(B) What is a Snapshot? Explain its type.
(C) Explain the following features of Integrated ROLAP.
(i) Parallelization
(ii) Data Partitioning
(D) Explain the role of Recycle Bin in OWB.
Q.7 ATTEMPT ANY THREE QUESTIONS: (15 MARKS)
(A) Explain the three levels of Data Redundancy to be considered while creating a Data Warehouse.
(B) What is a Listener? Write down the steps to configure a Listener.
(C) Explain the following:
(i) Surrogate Identifier and Business Identifier.
(ii) Birds Eye View Window.
(D) Explain any three Data Flow Operators of OWB.
(E) Explain the Object Details Window of Control Center Manager.
(F) Explain the different Matching and Synchronizing Strategies to be used while Synchronizing Objects.
Me8691 question bank unit 1
This document discusses the topics covered in the sixth semester course on Computer Aided Design and Manufacturing (ME8691). It includes definitions of key terms like product cycle, design process, concurrent engineering, CAD systems, computer graphics, and 2D and 3D transformations. It also covers CAD/CAM concepts and applications, types of production systems, manufacturing metrics, and mathematical models for production performance. Students are asked questions testing their understanding of these concepts.
Om important part b questions for all 5 units for all subjects
This document contains important questions from 5 units of the Operations Management course for Jeppiaar Engineering College. It includes questions related to production systems, forecasting, capacity and aggregate planning, design of product and work systems, materials management, and project and facility planning. Students are asked to explain concepts, compare different techniques, provide examples, and solve numerical problems related to various topics in operations and production management.
6084639 rr322401industrialmanagement
This document contains four sets of questions for an Industrial Management exam. Each set contains 8 questions related to topics in industrial management, such as management theories, organizational structure, plant layout, quality control, human resources, and project management. Students must answer 5 out of the 8 questions in each set. The questions generally ask students to define or explain key terms, compare and contrast different concepts, or discuss approaches and their application to management problems.
15. challenging qp for toppers
This document contains questions and topics related to process planning and cost estimation for a mechanical engineering course. It covers the following key areas in 5 units:
1. Work study, method study, work measurement, and ergonomics
2. Process planning, computer-aided process planning (CAPP), and documentation
3. Introduction to cost estimation, types of estimates, and estimation methods
4. Elements of cost, types of cost, direct and indirect costs, and overhead expenses
5. Production cost estimation techniques for various manufacturing processes like forging, welding, casting etc.
Cs8251 faq1
This document contains a question bank for the subject Programming in C for the second semester of the first year. It is divided into three units - basics of C programming, arrays and strings, and functions and pointers. For each unit, it lists learning objectives, part A questions which test basic recall and understanding, and part B questions which require higher-order thinking skills like application, analysis, evaluation and creation. The questions cover various C programming concepts like data types, operators, decision making statements, arrays, strings, functions, pointers, and more. Model answers or programs are expected for many of the questions.
Ge6757 TOATAL QUALITY MANAGEMENT
This document appears to be an exam for a Total Quality Management course, with three parts testing different aspects of quality management. Part A contains 10 short-answer questions about topics like Kaizen, cost of quality, FMEA, quality circles, benchmarking, process capability, QFD, six sigma, quality auditing, and ISO 14000. Part B has 5 longer answer questions that can be chosen between two options on topics such as TQM concepts and Deming Philosophy, roles of team leaders vs facilitators, quality tools, benchmarking, six sigma, QFD, and quality systems. Part C is a single long-answer question that can be answered based on either QFD or tools and techniques used in TQM
Production Planning & Control
Production Planning & Control
We Also Provide SYNOPSIS AND PROJECT.
Contact www.kimsharma.co.in for best and lowest cost solution or
Email: amitymbaassignment@gmail.com
Call: 9971223030
0102 Building Planning And Construction Management
The document contains 8 questions related to building planning and construction management. It includes questions on building bye laws and regulations, factors for residential building design, planning of public buildings like cinema theaters and bus stations, objectives and principles of planning, determining optimum cost and time using CPM, planning infrastructure for mechanization, construction equipment like rollers, and processing of aggregates for concrete. Students need to answer any 5 questions out of the 8 questions provided.
0102 Building Planning And Construction Management
The document contains 8 questions related to building planning and construction management. It includes questions on building bye laws and regulations, factors for residential building design, planning of public buildings like cinema theaters and bus stations, objectives and principles of planning, determining optimum cost and time using CPM, planning infrastructure for mechanization, construction equipment like rollers, and processing of aggregates for concrete. Students need to answer any 5 questions out of the 8 questions provided.
2013-June: 5th Semester CSE / ISE Question Papers
This document contains questions from a Software Engineering exam, with multiple choice and descriptive answers across two sections. Key topics covered include:
1) Challenges in software engineering like project delivery and emergent system properties.
2) Critical systems and the spiral model of software development.
3) Non-functional requirements, requirement specifications, and standard requirement documents.
4) State charts, software project management, architectural design decisions, and control styles.
The questions assess understanding of software engineering principles and processes.
5th Semester CS / IS (2013-June) Question Papers
5th Semester CS / IS (2013-June) Question PapersBGS Institute of Technology, Adichunchanagiri University (ACU)
This document contains a software engineering exam with questions covering various topics:
1. The first part asks about key challenges in software engineering like delivery and emergent system properties. It also asks about critical systems and the spiral model.
2. The second part asks about architectural design decisions, control styles, and advantages of object models. It also covers agile methods, pair programming, and software prototyping.
3. The exam concludes with questions on verification vs validation, cleanroom software development, equivalence partitioning, software cost estimation, and project staffing.Ktu question paper-s1-me-imes
Model question paper for Introduction to mechanical engineering sciences (Course) for B.Tech programme of APJ Abdul kalam Technological University (KTU)
files are related to mechanical engineering department
This document outlines the curriculum for the 6th semester of the Diploma in Mechanical Engineering (Sandwich) program effective from the 2020-21 academic year. It includes details of the subjects, course codes, teaching periods, evaluation schemes, and syllabi. The subjects include Industrial Engineering and Management, Automobile Engineering and Hybrid Vehicles, Power Station Engineering, and an elective. The document provides information on the internal and end semester assessments along with the minimum passing criteria. It also lists some recommended textbooks and learning resources for each subject.
CS878 Green Computing Anna University Question Paper
This document is a question paper for the subject of Green Computing. It contains questions assessing students' knowledge of key concepts in green computing. The questions are divided into three parts - Part A contains 10 multiple choice questions worth 2 marks each, Part B contains 5 questions worth 13 marks each, and Part C contains 1 question worth 15 marks.
The questions in Part A cover topics such as green IT metrics, carbon footprint, green assets, data centers, teleporting, material recycling, greenwashing, ISO 14000 standards, 'As Is' state in organizations, and advantages of green IT at home. Part B questions involve explaining concepts such as the relationship between business/environment and IT, green IT strategy benefits, major
More Related Content
What's hot
[Question Paper] Advanced SQL (Revised Course) [April / 2014]
This is a Question Papers of Mumbai University for B.Sc.IT Student of Semester - III [Advanced SQL] (Revised Course). [Year - April / 2014] . . .Solution Set of this Paper is Coming soon...
R09 operations research
The document is an exam paper for an Operations Research course. It contains 8 questions related to topics like linear programming, transportation problem, shortest path problem, and geometric programming. The first question formulates an LPP model to determine the production quantities of 3 products to maximize profit given constraints on raw materials and demand. It asks the candidate to solve the model using the Simplex method.
[Question Paper] BPR (Old Syllabus) [April / 2013]
This is a Question Papers of Mumbai University for B.Sc.IT Student of Semester - V [BPR] (Old Syllabus). [Year - April / 2013] . . . Solution Set of this Paper is Coming soon . . .
One marks of entrepreneurial development
The document contains 10 multiple choice questions about project feasibility analysis terms and processes. These include defining a feasibility analysis, the difference between project formulation and a detailed project report, that techno-economic analysis estimates project demand potential, that network analysis identifies optimal courses of action, and that a project profile includes economic size, capital cost and profitability. It also asks about the time period for a financial profitability statement, that project objectives should be realistic and attainable, that desk research identifies projects, and identifies the network analysis system developed by the British Atomic Energy Authority as PERT. The final question asks about computing the social impact of a project in a cost benefit analysis by estimating social costs and benefits.
Project Management (April – 2015) [Question Paper | IDOL: Revised Course]
Project Management (April – 2015) [Question Paper | IDOL: Revised Course]
april - 2017, april - 2016, april - 2015, april - 2014, april - 2013, october - 2017, october - 2016, october - 2015, october - 2014, may - 2016, may - 2017, december - 2017, 75:25 pattern, 60:40 pattern, revised course, old course, mumbai bscit study, mumbai university, bscit semester vi, bscit question paper, old question paper, previous year question paper, semester vi question paper, question paper, CBSGS, IDOL, kamal t, internet technology, digital signals and systems, data warehousing, ipr and cyber laws, project management, geographic information system
Project Management (December - 2018) [IDOL - Revised Course]
Project Management (December - 2018) [IDOL - Revised Course]
.
bscit, bscit question paper, bscit question papers 2018, bscit semester vi, bscit smester 6 2018, cbsgs, cbsgs 75-25 pattern, may – 2018, mumbai university bscit, mumbai university question papers, project management cbsgs 2018, project management may - 2018, project management question paper, question paper, tybscit
ASP.NET With C# (May – 2018) [IDOL: Revised Course | Question Paper]
This document is a question paper for the ASP.NET with C# course for semester 5 of the B.Sc. IT program. It contains 7 sections with a total of 27 multiple choice and descriptive questions worth 100 marks. The questions cover topics like C# concepts, Windows forms, ASP.NET controls and features, ADO.NET, jQuery, web services and more. Students are instructed to answer 15 out of the 27 questions in detail within the allotted time of 3 hours.
Data Warehousig (Question Paper) [May – 2018 | CBSGS - 75:25 Pattern]
Q.1 ATTEMPT ANY TWO QUESTIONS: (10 MARKS)
(A) Differentiate between OLTP Database and Data Warehouse Database.
(B) Write a short note on Dimensional Model.
(C) Explain the different types of developing strategies to be considered before developing a Data Warehouse.
(D) Define Data Warehouse. Explain its characteristics.
Q.2 ATTEMPT ANY TWO QUESTIONS: (10 MARKS)
(A) What is a Design Center? Explain the three main windows of it.
(B) Explain with the help of diagram OWB Components and Architecture.
(C) List and explain the steps to configure the Repository and Workspace.
(D) What is a Module? Write the steps to create Oracle Database Module.
Q.3 ATTEMPT ANY TWO QUESTIONS: (10 MARKS)
(A) Explain the different tabs of the Cube Editor in the Data Object Editor.
(B) Write a note on OWB Design Objects.
(C) Explain the four characteristics that have to be defined for every Dimension.
(D) Write the steps to create a Time Dimension using Time Dimension Wizard.
Q.4 ATTEMPT ANY TWO QUESTIONS: (10 MARKS)
(A) What is Staging? Explain the factors on which staging depends.
(B) Define Constraint. Explain types of Constraints.
(C) Explain any five Source and Target Operators.
(D) What is ETL? Explain the Manual ETL process.
Q.5 ATTEMPT ANY TWO QUESTIONS: (10 MARKS)
(A) What is Validation? Explain the process of validation in Design Center.
(B) Explain any three Transformation Operators.
(C) Explain the three main Default Operating Modes of a Mapping.
(D) Explain the features and benefits of Oracle Warehouse Builder.
Q.6 ATTEMPT ANY TWO QUESTIONS: (10 MARKS)
(A) Explain the term Data Sparsity and Data Explosion with example.
(B) What is a Snapshot? Explain its type.
(C) Explain the following features of Integrated ROLAP.
(i) Parallelization
(ii) Data Partitioning
(D) Explain the role of Recycle Bin in OWB.
Q.7 ATTEMPT ANY THREE QUESTIONS: (15 MARKS)
(A) Explain the three levels of Data Redundancy to be considered while creating a Data Warehouse.
(B) What is a Listener? Write down the steps to configure a Listener.
(C) Explain the following:
(i) Surrogate Identifier and Business Identifier.
(ii) Birds Eye View Window.
(D) Explain any three Data Flow Operators of OWB.
(E) Explain the Object Details Window of Control Center Manager.
(F) Explain the different Matching and Synchronizing Strategies to be used while Synchronizing Objects.
What's hot (8)
[Question Paper] Advanced SQL (Revised Course) [April / 2014]
[Question Paper] Advanced SQL (Revised Course) [April / 2014]
[Question Paper] BPR (Old Syllabus) [April / 2013]
[Question Paper] BPR (Old Syllabus) [April / 2013]
Project Management (April – 2015) [Question Paper | IDOL: Revised Course]
Project Management (April – 2015) [Question Paper | IDOL: Revised Course]
Project Management (December - 2018) [IDOL - Revised Course]
Project Management (December - 2018) [IDOL - Revised Course]
ASP.NET With C# (May – 2018) [IDOL: Revised Course | Question Paper]
ASP.NET With C# (May – 2018) [IDOL: Revised Course | Question Paper]
Data Warehousig (Question Paper) [May – 2018 | CBSGS - 75:25 Pattern]
Data Warehousig (Question Paper) [May – 2018 | CBSGS - 75:25 Pattern]
Similar to Me2036 PRODUCTION PLANNING AND CONTROL
Me8691 question bank unit 1
This document discusses the topics covered in the sixth semester course on Computer Aided Design and Manufacturing (ME8691). It includes definitions of key terms like product cycle, design process, concurrent engineering, CAD systems, computer graphics, and 2D and 3D transformations. It also covers CAD/CAM concepts and applications, types of production systems, manufacturing metrics, and mathematical models for production performance. Students are asked questions testing their understanding of these concepts.
Om important part b questions for all 5 units for all subjects
This document contains important questions from 5 units of the Operations Management course for Jeppiaar Engineering College. It includes questions related to production systems, forecasting, capacity and aggregate planning, design of product and work systems, materials management, and project and facility planning. Students are asked to explain concepts, compare different techniques, provide examples, and solve numerical problems related to various topics in operations and production management.
6084639 rr322401industrialmanagement
This document contains four sets of questions for an Industrial Management exam. Each set contains 8 questions related to topics in industrial management, such as management theories, organizational structure, plant layout, quality control, human resources, and project management. Students must answer 5 out of the 8 questions in each set. The questions generally ask students to define or explain key terms, compare and contrast different concepts, or discuss approaches and their application to management problems.
15. challenging qp for toppers
This document contains questions and topics related to process planning and cost estimation for a mechanical engineering course. It covers the following key areas in 5 units:
1. Work study, method study, work measurement, and ergonomics
2. Process planning, computer-aided process planning (CAPP), and documentation
3. Introduction to cost estimation, types of estimates, and estimation methods
4. Elements of cost, types of cost, direct and indirect costs, and overhead expenses
5. Production cost estimation techniques for various manufacturing processes like forging, welding, casting etc.
Cs8251 faq1
This document contains a question bank for the subject Programming in C for the second semester of the first year. It is divided into three units - basics of C programming, arrays and strings, and functions and pointers. For each unit, it lists learning objectives, part A questions which test basic recall and understanding, and part B questions which require higher-order thinking skills like application, analysis, evaluation and creation. The questions cover various C programming concepts like data types, operators, decision making statements, arrays, strings, functions, pointers, and more. Model answers or programs are expected for many of the questions.
Ge6757 TOATAL QUALITY MANAGEMENT
This document appears to be an exam for a Total Quality Management course, with three parts testing different aspects of quality management. Part A contains 10 short-answer questions about topics like Kaizen, cost of quality, FMEA, quality circles, benchmarking, process capability, QFD, six sigma, quality auditing, and ISO 14000. Part B has 5 longer answer questions that can be chosen between two options on topics such as TQM concepts and Deming Philosophy, roles of team leaders vs facilitators, quality tools, benchmarking, six sigma, QFD, and quality systems. Part C is a single long-answer question that can be answered based on either QFD or tools and techniques used in TQM
Production Planning & Control
Production Planning & Control
We Also Provide SYNOPSIS AND PROJECT.
Contact www.kimsharma.co.in for best and lowest cost solution or
Email: amitymbaassignment@gmail.com
Call: 9971223030
0102 Building Planning And Construction Management
The document contains 8 questions related to building planning and construction management. It includes questions on building bye laws and regulations, factors for residential building design, planning of public buildings like cinema theaters and bus stations, objectives and principles of planning, determining optimum cost and time using CPM, planning infrastructure for mechanization, construction equipment like rollers, and processing of aggregates for concrete. Students need to answer any 5 questions out of the 8 questions provided.
0102 Building Planning And Construction Management
The document contains 8 questions related to building planning and construction management. It includes questions on building bye laws and regulations, factors for residential building design, planning of public buildings like cinema theaters and bus stations, objectives and principles of planning, determining optimum cost and time using CPM, planning infrastructure for mechanization, construction equipment like rollers, and processing of aggregates for concrete. Students need to answer any 5 questions out of the 8 questions provided.
2013-June: 5th Semester CSE / ISE Question Papers
This document contains questions from a Software Engineering exam, with multiple choice and descriptive answers across two sections. Key topics covered include:
1) Challenges in software engineering like project delivery and emergent system properties.
2) Critical systems and the spiral model of software development.
3) Non-functional requirements, requirement specifications, and standard requirement documents.
4) State charts, software project management, architectural design decisions, and control styles.
The questions assess understanding of software engineering principles and processes.
5th Semester CS / IS (2013-June) Question Papers
5th Semester CS / IS (2013-June) Question PapersBGS Institute of Technology, Adichunchanagiri University (ACU)
This document contains a software engineering exam with questions covering various topics:
1. The first part asks about key challenges in software engineering like delivery and emergent system properties. It also asks about critical systems and the spiral model.
2. The second part asks about architectural design decisions, control styles, and advantages of object models. It also covers agile methods, pair programming, and software prototyping.
3. The exam concludes with questions on verification vs validation, cleanroom software development, equivalence partitioning, software cost estimation, and project staffing.Ktu question paper-s1-me-imes
Model question paper for Introduction to mechanical engineering sciences (Course) for B.Tech programme of APJ Abdul kalam Technological University (KTU)
files are related to mechanical engineering department
This document outlines the curriculum for the 6th semester of the Diploma in Mechanical Engineering (Sandwich) program effective from the 2020-21 academic year. It includes details of the subjects, course codes, teaching periods, evaluation schemes, and syllabi. The subjects include Industrial Engineering and Management, Automobile Engineering and Hybrid Vehicles, Power Station Engineering, and an elective. The document provides information on the internal and end semester assessments along with the minimum passing criteria. It also lists some recommended textbooks and learning resources for each subject.
CS878 Green Computing Anna University Question Paper
This document is a question paper for the subject of Green Computing. It contains questions assessing students' knowledge of key concepts in green computing. The questions are divided into three parts - Part A contains 10 multiple choice questions worth 2 marks each, Part B contains 5 questions worth 13 marks each, and Part C contains 1 question worth 15 marks.
The questions in Part A cover topics such as green IT metrics, carbon footprint, green assets, data centers, teleporting, material recycling, greenwashing, ISO 14000 standards, 'As Is' state in organizations, and advantages of green IT at home. Part B questions involve explaining concepts such as the relationship between business/environment and IT, green IT strategy benefits, major
7th Semester (June-2016) Computer Science and Information Science Engineering...
7th Semester (June-2016) Computer Science and Information Science Engineering...BGS Institute of Technology, Adichunchanagiri University (ACU)
This document contains questions from a seventh semester computer engineering exam on advanced computer architecture. It asks questions about instruction set architecture, pipelining, hazards, and branch prediction. Specifically:
- Part A asks about ISA dimensions, MTTF calculations, and emerging technologies critical to modern implementations. It also asks about pipeline stages and minimizing hazards through forwarding.
- Part B asks about scheduling and unrolling a MIPS loop to calculate cycles per iteration under different scenarios. It also asks about drawbacks of 1-bit dynamic branch prediction and how 2-bit prediction overcomes this.7th Semester (June-2016) Computer Science and Information Science Engineering...
7th Semester (June-2016) Computer Science and Information Science Engineering...BGS Institute of Technology, Adichunchanagiri University (ACU)
The document contains questions from a seventh semester examination in programming and web technologies. It includes 10 questions split into two parts - Part A and Part B. The questions cover topics like standard XHTML document structure, web servers, common HTML/XHTML tags, JavaScript functions, DOM navigation, CSS positioning, differences between HTML and XHTML, CSS selectors, and creating an XHTML form. Students are instructed to answer any 5 full questions selecting at least 2 from each part.unit 1 &2.pdf
This document contains the syllabus for the course ME8691 Computer Aided Design and Manufacturing. It includes 5 units: Introduction, Geometric Modeling, CAD Standards, Fundamentals of CNC and Part Programming, and Cellular Manufacturing and Flexible Manufacturing Systems. It outlines the objectives, expected outcomes, textbook references, and content for each unit. The units cover topics like 2D and 3D transformations, parametric curves and surfaces, CAD data standards, CNC programming, and cellular manufacturing techniques.
solve 6 , quiz 2link of book httpwww.irccyn.ec-nantes.fr~mart.pdf
solve 6 , quiz 2
link of book :http://www.irccyn.ec-
nantes.fr/~martinet/Mobrob/FundamentalsofVehicleDynamics.pdf 122% Document Elements
Tables charts Smart Art Review A Home Layout Paragraph Style Cambria (Body) 12 Aa A
AaBbc AaBbCcDdE Normal No spacing Heading 1 Heading 2 Tit Problem 6 Propose a currently
non-commercially available car mechatronics system. Describe the sensors, ac uators and control
system you ntend to use. Explain the purpose of this innovation and specify what the added value
is for the user [i.e why would anyone want to buy it?]. Print Layout View Sec 1 Pages: rds: 32 of
45 Search in Document Aa Text Box Shape Picture Themes 22% O
Solution
COMPUTER AIDED DESIGN OF MECHATRONIC SYSTEMS I Use of advanced computer
tools in the product development process is necessary to meet the market needs for fast product
development. I These tools allows for the verification of the design in all phases of the
development process. I Virtual prototypes, I The main drawback of using the computer tools is
that they are mostly limited to specific domains. The main requirement to the computer tools for
mechatronic system design I to apply to the systems from various domains. I to simultaneously
use different system representations (block diagram, physical model, bond graph)
Matuško&Koloni 2 of 43 MECHATRONICS SYSTEMS 2014/2015 CLASSICAL (NON-
MECHATRONIC) OPTIMIZATION I Classical approach to the optimization during the design
process assumes that the parameters of the process, sensors, actuators are known and constant
and only controller parameters are optimized. CONTROLLER PROCESS INTERFACE
SENSOR OPTIMIZATION + - yR(t) y(t) Matuško&Koloni 3 of 43 MECHATRONICS
SYSTEMS 2014/2015 OPTIMIZATION IN MECHATRONIC SYSTEM I Since the main
characteristic of the mechatronic design approach is simultaneous design of all system
components, the optimization process is performed, not only on the controller parameters but
also on the parameters of the other parts of the system. CONTROLLER PROCESS
INTERFACE SENSOR OPTIMIZATION + - yR(t) y(t) Matuško&Koloni 4 of 43
MECHATRONICS SYSTEMS 2014/2015 MODELS OF MECHATRONIC SYSTEMS I
Physical models, I Bond graphs I Control oriented models I Block diagrams, I Bode diagrams, I
Nyquist diagram, I Sate space models. I Time domain models I Animation I C-code
Matuško&Koloni 5 of 43 MECHATRONICS SYSTEMS 2014/2015 PHYSICAL MODELS I
Physical models describe the system behavior both on functional and structural level, I Model
parameters are real physical parameters, I Generally, physical models are not suitable for the
control system design, I Building such models requires a deep insight into a physical behavior of
the system. Matuško&Koloni 6 of 43 MECHATRONICS SYSTEMS 2014/2015 BOND
GRAPHS I Universal representation of the system behavior, independent of the system nature. I
Based on power flow analysis of the system. I Two quantities that define the system behavior
and power flow within the system (and with its environment).
C O M P U T E R P R O G R A M M I N G J N T U M O D E L P A P E R{Www
This document contains four sets of questions for a Computer Programming exam. Each set contains 8 questions ranging from concepts of pseudocode, flowcharts, and program development stages to more advanced topics like data structures, file handling, searching and sorting algorithms, and graph algorithms. Students must answer any 5 questions out of the 8 in each set. The questions test knowledge of programming fundamentals in C language as well as ability to write programs to demonstrate various programming concepts and techniques.
Computer Programming Jntu Model Paper{Www.Studentyogi.Com}
This document contains four sets of questions for a Computer Programming exam. Each set contains 8 questions ranging from concepts of pseudocode, flowcharts, and program development stages to more advanced topics like data structures, file handling, searching and sorting algorithms, and graph algorithms. Students must answer any 5 questions out of the 8 in each set. The questions test knowledge of programming fundamentals in C language as well as ability to write programs to demonstrate various programming concepts.
Similar to Me2036 PRODUCTION PLANNING AND CONTROL (20)
Om important part b questions for all 5 units for all subjects
Om important part b questions for all 5 units for all subjects
0102 Building Planning And Construction Management
0102 Building Planning And Construction Management
0102 Building Planning And Construction Management
0102 Building Planning And Construction Management
files are related to mechanical engineering department
files are related to mechanical engineering department
CS878 Green Computing Anna University Question Paper
CS878 Green Computing Anna University Question Paper
7th Semester (June-2016) Computer Science and Information Science Engineering...
7th Semester (June-2016) Computer Science and Information Science Engineering...
7th Semester (June-2016) Computer Science and Information Science Engineering...
7th Semester (June-2016) Computer Science and Information Science Engineering...
solve 6 , quiz 2link of book httpwww.irccyn.ec-nantes.fr~mart.pdf
solve 6 , quiz 2link of book httpwww.irccyn.ec-nantes.fr~mart.pdf
C O M P U T E R P R O G R A M M I N G J N T U M O D E L P A P E R{Www
C O M P U T E R P R O G R A M M I N G J N T U M O D E L P A P E R{Www
Computer Programming Jntu Model Paper{Www.Studentyogi.Com}
Computer Programming Jntu Model Paper{Www.Studentyogi.Com}
More from BIBIN CHIDAMBARANATHAN
ME8391 ENGINEERING THERMODYNAMICS UNIT II (SCANNED).pdf
The document is a collection of pages that repeatedly state that Bibin Chidambaranathan is an Associate Professor at RMKCET. Each page contains his name, title, and place of work.
ME8391 ENGINEERING THERMODYNAMICS UNIT V (SCANNED).pdf
The document is a collection of pages that repeatedly state that Bibin Chidambaranathan is an Associate Professor at RMKCET. Each page contains his name, title, and place of work.
ME8391 ENGINEERING THERMODYNAMICS UNIT III (SCANNED).pdf
The document is a collection of 116 pages that all state "BIBIN CHIDAMBARANATHAN ASSOCIATE PROFESSOR RMKCET" in large text. Each page appears to be a scanned page from a document or form with this repeated text.
ME8391 ENGINEERING THERMODYNAMICS UNIT IV (SCANNED).pdf
The document is a collection of pages that repeatedly state that Bibin Chidambaranathan is an Associate Professor at RMKCET. Each page contains his name, title, and place of work.
ME8391 ENGINEERING THERMODYNAMICS UNIT I (SCANNED).pdf
The document consists of 128 pages that are all identical. On each page is the text "BIBIN CHIDAMBARANATHAN ASSOCIATE PROFESSOR RMKCET" repeated, indicating it is some type of certificate or document for Bibin Chidambaranathan identifying him as an Associate Professor at RMKCET.
THERMODYNAMICS NOTES - HAND WRITTEN - unit - 1 - PART 1.pdf
The document outlines a plan for a neighborhood block party to be held on June 15th from 12pm to 4pm. The event will include food, games, and music in the park located at Main Street and Elm Avenue. Residents are asked to RSVP by June 1st so organizers can plan accordingly.
X10885 (omf751)
This document appears to be an exam paper for a course on Lean Six Sigma. It contains 16 questions across three parts:
- Part A contains 10 multiple choice questions worth 2 marks each, related to Lean Six Sigma concepts like customer centricity, scatter charts, Pareto analysis, failure modes, DFSS methodology, champions, organizational structures, preventative maintenance.
- Part B contains 5 questions worth 13 marks each, asking students to discuss symptoms indicating the need for Lean Six Sigma, explain the PDCA cycle and CTQ tree, define Risk Priority Number and explain the DMAIC process, discuss leadership activities and project selection in Lean Six Sigma.
- Part C contains 1 question worth 15 marks, asking students to
X10732 (mg8591)
This document contains a case study about Matt James, the new manager of Health-Time fitness club. He implemented stricter rules and schedules for staff to improve finances. However, morale declined as some staff quit or switched jobs. Matt is perplexed about the staff's lack of motivation and pride in the club's success. He asks for strategies to address the problem. The case study is followed by four questions analyzing the motivational issues using Maslow's hierarchy, expectancy theory, and equity theory. An optional question asks to justify if concentration of power or delegation of authority is better for an organization.
X10730 (mg8091)
This document contains a question paper for an entrepreneurship development exam with three parts. Part A contains 10 short answer questions about topics like defining entrepreneurship, characteristics of entrepreneurs, motivation, market research, project reports, and more. Part B contains 5 long answer questions about types of entrepreneurs, entrepreneurial growth factors, stress management techniques, setting up a business, sources of financial support, and more. Part C contains 1 long answer question about developing a business plan or discussing policy support for small industries. The exam covers a range of entrepreneurship topics and tests students' understanding through definitions, explanations, discussions, and developing a business plan.
X10730 (mg8091)
This document contains a question paper for an entrepreneurship development exam with three parts. Part A contains 10 short answer questions about topics like defining entrepreneurship, characteristics of entrepreneurs, motivation, market research, project reports, and more. Part B contains 5 long answer questions about types of entrepreneurs, entrepreneurial growth factors, stress management techniques, setting up a business, sources of financial support, and more. Part C contains 1 long answer question about developing a business plan or discussing policy support for small industries. The exam covers a range of entrepreneurship topics and tests students' understanding through definitions, explanations, discussions, and developing a business plan.
X10713 (me8793)
This document contains details regarding a mechanical engineering examination, including questions on topics like process planning, cost estimation, machine selection, jigs and fixtures design, and manufacturing processes. It provides multiple choice and numerical questions to calculate costs, times, and parameters for various manufacturing steps like welding, turning, shaping and upsetting.
X10712 (me8792)
This document provides information about an examination for a power plant engineering course, including questions that assess knowledge of various power plant components, systems, and principles. It begins with general multiple choice and short answer questions about different power plant types. Longer questions then require explaining the working principles and components of specific power plant technologies like circulating fluidized bed combustors, supercritical boilers, diesel power plants, gas turbines, nuclear reactors, wind turbines, and solar power plants. The document concludes with numerical problems involving calculating costs and efficiencies for different power generation scenarios.
X10711 (me8791)
This document contains questions for an exam on the topic of Mechatronics. It includes multiple choice and descriptive questions in three parts:
Part A contains 10 multiple choice questions worth 2 marks each, covering topics like measurement systems, potentiometers, microprocessors, interfacing, PLCs and stepper motors.
Part B contains 5 questions worth 13 marks each, with choices between two questions on topics like sensors, microprocessor architecture, interfacing, PLC architecture and applications of stepper motors.
Part C contains one 15 mark question providing a circuit design problem using a PLC or describing a car engine management system using a mechatronic approach.
X10710 (me8694)
This document contains questions that will be asked in an examination for a Mechanical Engineering course on hydraulics and pneumatics. It includes questions in three parts - Part A contains 10 short answer questions worth 2 marks each about fluid power applications, components, and concepts. Part B contains 5 longer answer questions worth 13 marks each about hydraulic pumps, motors, circuits and accumulators. Part C contains 1 question worth 15 marks asking to either design a fluid power circuit for a drilling machine or develop a pneumatic circuit using cascade method for multiple cylinders.
X10709 (me8693)
This document contains details regarding an examination for a heat and mass transfer course, including:
1) The exam has 3 parts consisting of short answer, long answer, and case study questions worth 20, 65, and 15 marks respectively.
2) Sample questions assess topics like fin analysis, boundary layers, heat exchanger design, phase change processes, and radiation heat transfer.
3) One long answer question involves calculating temperatures in a multi-layer wall and determining the heat loss, while another evaluates melting of an iceberg towed through water.
X10708 (me8692)
The document provides details regarding an examination for Automobile Engineering students, including sample questions that assess knowledge of finite element analysis. It includes questions related to boundary conditions, weighted residual methods, shape functions, element types, numerical integration techniques, and advantages of natural coordinates. Sample problems assess determining temperature distributions, stresses/strains, shape functions, and calculating displacements under pressure. The document tests a range of foundational finite element analysis concepts.
X10707 (me8691)
The document contains questions from a Mechatronics Engineering exam on the topic of computer aided design and manufacturing. It has three parts - Part A contains 10 short answer questions worth 2 marks each, Part B contains 5 long answer questions worth 13 marks each, and Part C contains 1 long answer question worth 15 marks. The questions cover topics such as product life cycles, spline curves, solid modeling approaches, CAD data exchange, CNC programming, flexible manufacturing systems, and geometric modeling techniques like Bezier curves.
X10706 (me8651)
This document contains a question paper for the subject Design of Transmission Systems. It has three parts - Part A contains 10 short answer questions, Part B contains 5 long answer numerical problems, and Part C contains 1 design problem. Some of the topics covered include types of pulleys and belts, gear trains, brakes, wire rope sheaves and gearbox design. The paper is for a Bachelor's degree examination with a duration of three hours and total marks of 100.
X10705 (me8595)
This document contains details of an examination for a thermal engineering course, including 16 questions across three parts. Part A contains 10 short answer questions about topics like steam nozzles, boiler components, refrigeration systems. Part B contains 5 longer answer questions involving calculations related to steam nozzles, boiler efficiency, turbine blade efficiency. Part C contains a single longer question involving steam conditions for a process heating system or psychrometric analysis of an air conditioning system.
More from BIBIN CHIDAMBARANATHAN (20)
ME8391 ENGINEERING THERMODYNAMICS UNIT II (SCANNED).pdf
ME8391 ENGINEERING THERMODYNAMICS UNIT II (SCANNED).pdf
ME8391 ENGINEERING THERMODYNAMICS UNIT V (SCANNED).pdf
ME8391 ENGINEERING THERMODYNAMICS UNIT V (SCANNED).pdf
ME8391 ENGINEERING THERMODYNAMICS UNIT III (SCANNED).pdf
ME8391 ENGINEERING THERMODYNAMICS UNIT III (SCANNED).pdf
ME8391 ENGINEERING THERMODYNAMICS UNIT IV (SCANNED).pdf
ME8391 ENGINEERING THERMODYNAMICS UNIT IV (SCANNED).pdf
ME8391 ENGINEERING THERMODYNAMICS UNIT I (SCANNED).pdf
ME8391 ENGINEERING THERMODYNAMICS UNIT I (SCANNED).pdf
THERMODYNAMICS NOTES - HAND WRITTEN - unit - 1 - PART 1.pdf
THERMODYNAMICS NOTES - HAND WRITTEN - unit - 1 - PART 1.pdf
THERMODYNAMICS NOTES - HAND WRITTEN - unit - 1 - PART 2.pdf
THERMODYNAMICS NOTES - HAND WRITTEN - unit - 1 - PART 2.pdf
Recently uploaded
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaRecently uploaded (20)
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Me2036 PRODUCTION PLANNING AND CONTROL
- 1. Reg. No.': I I I. I I Questiol) Paper Code : 23832 .B.E./B.Tech.DEGREE EXAMINATION, NOVEMB~RJDECEMBER 2018. Eighth Semester Mechanical Engineering ME 2036- PRODUCTION PLANNING AND CONTROL (Common to Production Engineering/ Mechanical and Automation Engineering) (Regulations 2()0S) (Also common to PTME 2036 ---'- Production Planning and Control for B.E. (Part ~Time) ~eventh Se:rnester- Mechanical Engineering- Regulations 2009) Time : Three hours Maximum : 100 marks Answer ALL questions.. PART A- (10 x 2 = 20 marks) 1. · ·What are the objectives of production planning? . ; 2. What is break even analysis? ~' 3. What are therbligs? Give any two therbligs with symbols.. . . 4. List the steps involved in time study. 5. What is value analysis? 6. Define product planning. 7. Write a note on perpetual loading. 8, . What is product sequencing? 9. ·List the advantages of two bin system. .10. What is JIT? BIBIN.C / ASSOCIATE PROFESSOR / MECHANICAL ENGINEERING / RMK COLLEGE OF ENGINEERING AND TECHNOLOGY 1
- 2. 11. (a) (i) (ii) PART B- (5 x 16 = 80 marks) Discuss benefits of PPC. (8) Distinguish between batch production and continuous productio.n. (8) Or. (b) Explain the different aspects ofproduct development and design. (16) 12. · (a) Explain the steps involved in work study. . Ot (b) Briefly discuss the steps in work Sampling study. 13. (a) Define process Planning. Di8cuss in detail steps for the same. (16) (b) (i) )(ii) Or Describe the problems due to the lack of product Planning. (6) Explain how prooesa capabilities are analysed in a multi product system. · (10) 14. (a) Discuss in detail the method ofobtaining the master production fiehedule for a system with examples. Suitable assumptions can ~ made. · ·or (b) Explain in detail the various components ofMRP and their functions and objectives. 15. (a) Sta~irlg the assumptions .in the EOQ model .derive systematically the expression for economic lot size providing explanations wherever appropriate. Or· (b) Discuss in detail the fundamentals ofMRP II and ERP. • 2 23832 • BIBIN.C / ASSOCIATE PROFESSOR / MECHANICAL ENGINEERING / RMK COLLEGE OF ENGINEERING AND TECHNOLOGY 2