The document provides step-by-step instructions for configuring a laser printer for printing receipts from the SchoolAdmin software. It describes how to add the printer, select the correct port and driver, name the printer, set the paper size to A5 or A6, and test printing a receipt to ensure proper installation. The instructions also explain how to access and print receipts from within the SchoolAdmin software once the printer is configured.

1. Configuring Laser Printer for Printing SchoolAdmin Receipts
1 | copyright 2009-2013, MarvelSoft, www.marvelsoft.co.in
SchoolAdmin default printer Setting for printing receipt s(LaserJet printers)
Goto Start->Control Panel->Printer and Faxes->Click on Add a Printer.
Click on next button.
Select local printer attached this computer and lick on next.

2. Configuring Laser Printer for Printing SchoolAdmin Receipts
2 | copyright 2009-2013, MarvelSoft, www.marvelsoft.co.in
Select printer port ,if printer contain USB port select USB001(Virtual printer port for USB) otherwise
select LPT: (Recommended printer port) then click on next button.

3. Configuring Laser Printer for Printing SchoolAdmin Receipts
3 | copyright 2009-2013, MarvelSoft, www.marvelsoft.co.in
Select the manufacturer and model of your printer then click on next.
In this following screen shot HP is manufacturer and hp LaserJet 1000 is the printer model.
A driver is already installed for this computer.you can use same driver.
Select keep existing driver (recommended) then click on next.

4. Configuring Laser Printer for Printing SchoolAdmin Receipts
4 | copyright 2009-2013, MarvelSoft, www.marvelsoft.co.in
Type a name for this Printer, in this case printer name is Receipt Printer. Make the printer as default by
selecting Yes.

5. Configuring Laser Printer for Printing SchoolAdmin Receipts
5 | copyright 2009-2013, MarvelSoft, www.marvelsoft.co.in
To conform that the printer is installed properly you can print a test by selecting yes ,in this example we
have selected no.
Click on finish. If you have followed the above steps correctly, then you have successfully installed the
printer.
Configuring Newly installed Printer for Receipt Printing
Now you can observe the icon Receipt Printer created in printer and Faxes folder.
Select the Printer just now we have installed i.e., Receipt printer. Right click on Receipt Printer and
select properties.

6. Configuring Laser Printer for Printing SchoolAdmin Receipts
6 | copyright 2009-2013, MarvelSoft, www.marvelsoft.co.in
Click on Advanced ->Printing Defaults
Click on paper if you want to print receipt in A5 size select A5 then click on apply.

7. Configuring Laser Printer for Printing SchoolAdmin Receipts
7 | copyright 2009-2013, MarvelSoft, www.marvelsoft.co.in
Note:
A5 Receipt is exactly half of A4 size paper, and A6 is 1/4th
of A4), base on which paper size you want to
print the receipt select the respective paper size. MarvelSoft SchoolAdmin supports printing receipts on
A4, A5 and A6 size papers.

8. Configuring Laser Printer for Printing SchoolAdmin Receipts
8 | copyright 2009-2013, MarvelSoft, www.marvelsoft.co.in
if you want print in A6 size Select A6
Goto SchoolAdmin->Feepayment->Do Fee payment for a student ->click on print.
The receipt will open in PDF ->click on printer icon on left corner of the PDF page.

9. Configuring Laser Printer for Printing SchoolAdmin Receipts
9 | copyright 2009-2013, MarvelSoft, www.marvelsoft.co.in
You can see Printer name Selected Receipt Printer by default
Insert A5 size paper click on OK your receipt will print .