Jason Heinrichs has over 10 years of experience in aviation maintenance and safety. He holds an FAA Airframe and Powerplant certificate and OSHA certifications. His most recent role is as a Mechanical Specialist at Mitsubishi Hitachi Power Systems, where he performs turbine maintenance, troubleshooting, and precision measurement tasks. Prior to this, he served 6 years in the U.S. Navy as an aviation machinist mate and logistics specialist, maintaining aircraft engines and systems. Heinrichs has a bachelor's degree in Aviation Maintenance Management and Occupational Safety & Health from Southeastern Oklahoma State University.

1. Jason Heinrichs
411 Topsail Way
Crosby, Texas 77532
713-906-3688 (cell phone)
JHeinrichs1208@gmail.com
Certifications: Endorsement(s) Certificate Number: Date ofIssue:
FAA Certified Mechanic Airframe/Powerplant 3207815 12/19/2006
OSHA
Confined Space Permit Required 08/11/2015
10 Hour General Industry 08/11/2015
Construction 11/13/2015
Navy
EAWS - Enlisted Aviation Warfare Specialist
Security Clearance:Secret 03/2011
Mitsubishi Hitachi
Operator Class VForklift 02/11/2016
Vertical Mast internal combustion
Class VII Forklift 02/11/2016
Telescopic Boom all terrain
Qualified Rigger 02/11/2016
Overhead Crane 02/12/2016
Qualified Signalperson 02/12/2016
Cranes & Forklifts
Education:
Southeastern Oklahoma State University (SOSU)
Durant, Oklahoma
-Bachelor Science Degree
-Major: Aviation Maintenance Management
-Major: Occupational Safety & Health
Redstone Institute (formerly Westwood Aviation Institute)
Houston, TX
-Aviation Maintenance Technology: Airframe and Powerplant
Experience:
Mitsubishi Hitachi Power Systems-Orlando, FL
Aug 2015 – Present Mechanical Specialist C
- Alignment of turbine combustors and components including inter-stage seal
housings, blade rings, and transitions
- Using proper rigging techniques associated with but not limited to blade ring
rollout, heavy cylinder and casing lifts, and turbine rotor removal/installation
- Coupling alignments on small industrial rotating equipment and industrial
generators
- Utilizing proper material control procedures during opening, inspection, and
closing of turbines and generators
- Removal and installation of turbine blade and vane segments
- Utilizing precision measuring equipment for maintaining proper clearances
- Troubleshooting complicated mechanical/electrical problems
- Utilizing proper crane and forklift lifting signals
- Maintain tooling inventory and communicate re-order with field supervisor

2. United States Navy – Jacksonville, FL
2013 – May 2015 Assigned to Engine Mechanic shop - PatrolSquadron (VP-26)
- Performed maintenance on the Allison T-56-A-14 turboprop engines and
subsystems and the -10 Auxiliary Power Unit.
- Performed inspections and repairs on the engines and the propeller systems,
including all types of required inspections (ex: Special, Scheduled, Daily).
- Performed Troubleshooting of problems within the systems
- Removed and replaced worn parts)
2012 - 2013 Assigned to aviation logistics department - Patrol Squadron (VP-26)
- Ordered,Received, and issued parts to the work centers of the squadron
- Maintained proper parts inventory of all parts received and issued
- Maintained proper tooling inventory of all special tools.
- Maintained proper inventory of all Hazmat
- Properly disposing of hazmat related waste
May 2011 Enlisted U.S. Navy
Eaker Field – Durant, OK
2009 A&P Maintenance Technician
- Performed maintenance on Cessna 150s, 172s, 310s
- Performed 100 hr. inspections
- Kept shop and work spaces clean and organized
Aeroframe Services - Lake Charles, LA
2008 A&P Maintenance Technician
- Removed and replaced failed system components on aircraft (Ratheon DC-10-10)
- Assisted in modification of fuselage to accommodate new research equipment.
Work History:
2015 – 2016 Mitsubishi Hitachi Power Systems – MechanicalSpecialist C – Orlando, FL
2011 – 2015 US Navy – Aviation Machinist Mate – Jacksonville, FL
2010 – 2011 IISG LLC (Inland) – Field Safety Technician - Deer Park,TX
2009 Eaker Field – A&P Maintenance Technician - Durant, OK
2008 Aeroframe Services – A&P Maintenance Technician - Lake Charles, LA
2006 Fabrication and Construction (F&C) - Shop Helper - Dayton, TX
Computer Skills: Proficient in Microsoft Word, PowerPoint and Excel
Tools: Proficient/familiar with aircraft airframe and powerplant tools, mechanics tools, metal
fabrication tools, welding equipment, and woodworking tools. self-taught welder
(mig, stick)
Achievements: Earned Eagle Scout Rank - Boy Scouts of America - 2003