This document provides information about Load King bottom dump trailers. It summarizes that Load King has 60 years of trailer manufacturing experience and their bottom dump trailers are suitable for hauling materials like sand, gravel, dirt, asphalt, and coal. Bottom dumps have advantages over end dumps like quick loading/unloading, ability to handle rugged terrain, and avoiding overhead obstructions. Two axle and three axle models are described with 20 cubic yard capacities and 60,000 pound payloads. Additional details are given about the trailers' components and options.

1. LOAD KING BOTTOM
DUMP TRAILERS
60 Years of Trailer
Manufacturing Experience

2. LOAD KING 2066-40-3
BOTTOM DUMP

3. APPLICATIONS
 SAND
 MILLINGS
 GRAVEL
 DIRT
 ASPHALT
 COAL

4. BOTTOM DUMP ADVANTAGES
QUICK AND EASY LOADING AND
UNLOADING
CAN HANDLE RUGGED TERRAIN
LOWER CENTER OF GRAVITY IN
COMPARISON TO END DUMPS
NO CONCERNS WITH OVERHEAD
OBSTRUCTIONS (BRIDGES,
POWERLINES, ETC…)

5. Model 2060-40-2
Nomenclature
•20 Cubic Yard Capacity Without Sideboards (22 cu. yd. capacity with sideboards)
•60,000 lb. Payload Capacity
•40 Foot Overall Standard Length (w/o Push block)
•2 Axle Configuration

6. Model 2060-40-3
Nomenclature
•20 Cubic Yard Capacity Without Sideboards (22 cu. yd. capacity with sideboards)
•60,000 lb. Payload Capacity
•40 Foot Overall Standard Length (w/o Pushblock)
•3 Axle Configuration

7. CORNER CASTING
The corner casting is located at the bottom corners
of the bottom dump shell. Each casting ties in the
slope sheets at two sides in this vulnerable, high
stress location.

8. RUBBER-BUSHED FIFTH WHEEL
The oscillating 5th
wheel plate includes a replaceable rubber bushing

9. Standard Apitong sideboards provide a long-lasting solution due to its dense
nature and resistance to sun and moisture.

10. Standard Heavy Duty Bolt on Push Block with Integrated Underride Protection

11. Handheld Remote Pendant Allows for Walk-Along Operator Control to Open
and Close Gates in Applications Requiring Precise Material Discharge.

12. Incremental gate stops allow for pre-setting the gate opening on 6 inch
increments.
Replaceable Gate Pivot Bearings.
Removable Tubular Landing Legs.

13. 60 Gallon Air Tank Provides Plenty of Air for Short Loading and Unloading
Cycles.

14. Heavy Duty Windrow Deflector (Axle Guard) on Front Axle Protects Axles and
Components from Damage.

15. BOTTOM DUMP OPTIONS
•Infinite gate controls (Includes
remote plug for ground control)
•Control center vandalism kit
•Front fenders
•Steel tubing sideboards
•Front and rear spill covers
•Electric or Manual style tarp
system
•Lower hopper extensions
•Single point suspension
• Air ride suspension
• Air lift w/ air ride (3 Axle Only)
• Full width rear mud flap
• Loose push block extension
• Air cushion pintle hitch
• Wiring & air lines to rear
• Gate seal kit