Dream Catcher Lesson Plan
•Download as PPTX, PDF•
3 likes•5,250 views
This document provides information about geometric shapes and making dream catchers. It defines what a polygon is and gives examples of different polygons like squares, triangles, hexagons, and stars. It identifies key attributes of each shape like number of sides, angles, and vertices. The document instructs students to identify these attributes in the shapes they choose for their dream catchers.
Report
Share
Report
Share
Recommended
Drafting the basic pattern for short pants
This document provides instructions for drafting the front and back patterns for short pants in 3 steps:
1) For the front pattern, mark construction points and measure distances between points to shape the front, including the rise, seat, thigh, and waist measurements.
2) For the back pattern, mark points on the existing front pattern and measure distances to shape the back, including the waist, seat, and crotch measurements.
3) Rubrics and references are listed to evaluate understanding of the drafting process and sources for more information.
Visualising solid shapes
this is a presentation on shapes and map and is also about the map which is drawn in maths in chapter of solid shapes.
TLE 9.pptx
This document is the lesson plan for a sewing class. It discusses the important tools, equipment, and supplies needed for sewing. The lesson plan identifies different measuring tools like tape measures and rulers. It also covers cutting tools, marking tools, sewing accessories, pressing equipment, and common sewing supplies. Students are asked to identify photos of these various tools and equipment in a worksheet. The class will have a quiz on this material at the next meeting.
Basic Drafting Tools & Materials and Setting-Up your Drawing Table
This document outlines the basic drafting tools and materials needed for drawing, including a drawing table, T-square, triangles, ruler, eraser, pencils, and drafting tape. It then provides step-by-step instructions for properly setting up a drawing table with the T-square and securing a sheet of paper in place using drafting tape at the corners. The objectives are for students to be able to identify the basic drafting tools and materials and demonstrate how to set up a drawing table.
Tessellation tutorial part_1
This document provides instructions for creating tessellations, which are patterns made by repeating a shape so that there are no gaps or overlaps. It begins by explaining tessellations and providing examples. Readers are instructed to use graph paper to draw lines and create shapes that tessellate. Various line patterns are demonstrated. Readers are challenged to find hidden images within the patterns by rotating them. The document then guides refining one pattern to look more like seals. Finally, instructions are given for transferring and coloring the completed tessellation design.
Jim dine hearts
The document discusses Jim Dine, an American pop artist known for his heart series paintings and sculptures from the 1950s-60s. Dine's hearts are unique as they lack outlines and use color and value contrast rather than realistic shading. The document encourages students to create heart compositions using these pop art techniques of non-outlined shapes and contrasting colors/values.
TRAZADO DE POLÍGONOS REGULARES
Documento que muestra conceptos básicos sobre polígonos y construcciones de polígonos regulares paso a paso. Diseñado especialmente para el nivel de 3º de ESO pero aplicable en 1º de ESO y en cualquier otro curso superior a un nivel básico.
Surface Area & Volumes
The document thanks the teacher for giving the opportunity to do a wonderful project that helped increase knowledge. It also thanks parents and friends for their help in finishing the project on time. The purpose of the project was not just for marks but also to gain more knowledge. Thanks are expressed again to all who provided assistance.
Recommended
Drafting the basic pattern for short pants
This document provides instructions for drafting the front and back patterns for short pants in 3 steps:
1) For the front pattern, mark construction points and measure distances between points to shape the front, including the rise, seat, thigh, and waist measurements.
2) For the back pattern, mark points on the existing front pattern and measure distances to shape the back, including the waist, seat, and crotch measurements.
3) Rubrics and references are listed to evaluate understanding of the drafting process and sources for more information.
Visualising solid shapes
this is a presentation on shapes and map and is also about the map which is drawn in maths in chapter of solid shapes.
TLE 9.pptx
This document is the lesson plan for a sewing class. It discusses the important tools, equipment, and supplies needed for sewing. The lesson plan identifies different measuring tools like tape measures and rulers. It also covers cutting tools, marking tools, sewing accessories, pressing equipment, and common sewing supplies. Students are asked to identify photos of these various tools and equipment in a worksheet. The class will have a quiz on this material at the next meeting.
Basic Drafting Tools & Materials and Setting-Up your Drawing Table
This document outlines the basic drafting tools and materials needed for drawing, including a drawing table, T-square, triangles, ruler, eraser, pencils, and drafting tape. It then provides step-by-step instructions for properly setting up a drawing table with the T-square and securing a sheet of paper in place using drafting tape at the corners. The objectives are for students to be able to identify the basic drafting tools and materials and demonstrate how to set up a drawing table.
Tessellation tutorial part_1
This document provides instructions for creating tessellations, which are patterns made by repeating a shape so that there are no gaps or overlaps. It begins by explaining tessellations and providing examples. Readers are instructed to use graph paper to draw lines and create shapes that tessellate. Various line patterns are demonstrated. Readers are challenged to find hidden images within the patterns by rotating them. The document then guides refining one pattern to look more like seals. Finally, instructions are given for transferring and coloring the completed tessellation design.
Jim dine hearts
The document discusses Jim Dine, an American pop artist known for his heart series paintings and sculptures from the 1950s-60s. Dine's hearts are unique as they lack outlines and use color and value contrast rather than realistic shading. The document encourages students to create heart compositions using these pop art techniques of non-outlined shapes and contrasting colors/values.
TRAZADO DE POLÍGONOS REGULARES
Documento que muestra conceptos básicos sobre polígonos y construcciones de polígonos regulares paso a paso. Diseñado especialmente para el nivel de 3º de ESO pero aplicable en 1º de ESO y en cualquier otro curso superior a un nivel básico.
Surface Area & Volumes
The document thanks the teacher for giving the opportunity to do a wonderful project that helped increase knowledge. It also thanks parents and friends for their help in finishing the project on time. The purpose of the project was not just for marks but also to gain more knowledge. Thanks are expressed again to all who provided assistance.
Faces vertices edges
The document discusses the key geometric properties of cubes and cuboids. It notes that a cube has 6 square faces, 8 vertices, and 12 edges. Similarly, it states that a cuboid also has 6 faces, though they can be rectangular or a combination of rectangles and squares, and like a cube it has 8 vertices and 12 edges.
Total Surface Area of Prisms
The document discusses calculating the total surface area (TSA) of different 3D shapes by unfolding them into their 2D nets. It provides the TSA formulas and worked examples for rectangular prisms, triangular prisms, cylinders, and square pyramids. Engineers, builders and others use TSA to determine material needs like paint or carpet for projects. The document emphasizes that TSA is an area measurement, not a volume.
Properties of triangles
1) The document discusses geometry concepts related to angles of triangles including the triangle angle sum theorem, exterior angle theorem, and finding measures of unknown angles using known information.
2) Key details include that the sum of the interior angles of any triangle is 180 degrees, and the measure of an exterior angle is equal to the sum of the remote interior angles.
3) Examples are provided to demonstrate using these theorems to find the measures of missing angles in different triangle scenarios.
Parts of a circle
This document defines and describes the key terms and concepts related to parts of a circle, including the center, radius, chord, diameter, arc, semicircle, circumference, secant line, tangent line, central angle, and inscribed angle. It explains that a circle is the set of all points at a fixed distance from a given center point, and defines other geometric shapes and measurements within or relating to the circular shape, such as radii, diameters, arcs of different lengths, and lines that intersect the circle.
Maruja Mallo
Maruja Mallo was a Spanish painter born in 1902 in Vivero, Spain. She had a romance with poet Rafael Alberti in 1925. In the 1930s, she had her first exhibition in Paris and taught in Spain. During the Spanish Civil War in 1936, she fled to Argentina. She returned to Spain in the 1960s. Maruja Mallo died in 1995 in Madrid and was known for her paintings including "Las uvas" and "La sorpresa del trigo."
Three dimensional figures
This document defines and describes various three-dimensional figures. It begins by defining 3D figures as solid objects that have length, width, and height. The parts of 3D figures are then identified as surfaces, faces, bases, edges, corners, and vertices. Examples are provided of common 3D shapes like cubes, spheres, cones, cylinders, pyramids, and rectangular prisms along with their characteristics and real-world examples. The document aims to build understanding of 3D geometry terms and the attributes of different three-dimensional shapes.
Maruja mallo
Maruja Mallo was a Spanish painter born in 1902 as Ana María González Mallo in Viveiro, Spain. She studied fine arts in Madrid where she met several famous artists. In the 1930s, she began focusing her artwork on farmers and fishermen, but had to flee to Buenos Aires during the Spanish Civil War in 1936. While in Argentina, she was inspired by the beaches to include geometric sea elements in her brightly colored paintings and also created a series of mask paintings. She lived in America for 25 years before returning to Spain in 1965.
Paul klee
Paul Klee nació en una familia de músicos, aunque pronto descubrió que le gustaba más la pintura. Estudió en una escuela de arte para aprender a ser un buen pintor y viajó mucho, descubriendo que le gustaban los colores. Finalmente se convirtió en un pintor muy famoso cuyas obras se exhiben en muchos museos.
Brittos presentation
Romero Britto is a Brazilian artist born in 1963 who combines elements of cubism, pop art, and graffiti in his vibrant, colorful works. Britto began drawing and painting at a young age and had his first art show in 1979, though he was unsure if he could succeed as an artist. He later studied art in Europe after realizing he could not continue down the path of law school. Britto is now famous worldwide for his celebratory works featuring hearts and familiar characters painted in a stylized, geometric manner that encourages creativity in viewers.
Henry Moore
Henry Moore was a British sculptor from Yorkshire active from 1898 to 1986. He used drawing studies as references for his larger public sculptures. By adapting shapes from both the internal and external human body, Moore created anthropomorphic sculptures that explored the human form in abstracted ways.
Drafting the fornt part of the skirt
The document provides step-by-step instructions for drafting a basic skirt pattern. It involves marking reference points on the drafting paper based on body measurements and connecting those points with lines and curves to create the skirt shape. Key steps include marking points for waist, hip, and hem measurements then connecting them to create the skirt front and back patterns. Pocket and zipper placement are also indicated on the front pattern.
Parts of a circle
The document defines a circle as a closed curve where all points are equidistant from the center. It lists and describes the main parts of a circle, including the radius, diameter, chord, tangent line, secant line, central angle, and inscribed angle. The radius is the line from the center to the circumference, the diameter passes through the center and is twice the length of the radius, and a chord connects two points on the circle.
Circles
This document defines and explains key terms and concepts related to circles in geometry. It discusses what a circle is, the history of circles, and important circle terminology like diameter, radius, chord, arc, sector, and segment. It also covers theorems about relationships between chords, tangents, secants, and angles in circles. Key ideas are that a circle is a set of points equidistant from the center, and that circles have been an important mathematical concept throughout history.
Xilografia
La xilografía es la técnica de impresión más antigua utilizando planchas de madera grabadas. Se originó en China y se perfeccionó en Japón, donde alcanzó su máxima expresión. Consiste en tallar la madera para eliminar las zonas que no se quieren imprimir y dejar las líneas del dibujo, que se entintan para pasar la imagen al papel. Fue muy popular en Japón para imprimir libros y estampas ukiyo-e de la vida cotidiana.
1.pptx
This document provides information about 2D and 3D shapes including their properties such as sides, edges, vertices, area and perimeter. It defines parallel and perpendicular lines and discusses different types of quadrilaterals, polygons, and 3D shapes such as prisms and pyramids. Examples are provided to demonstrate how to identify shapes and calculate their area and perimeter. Key terms are defined throughout including faces, edges, vertices, regular and irregular polygons.
Classifying polygons
The document provides guidance on classifying different types of polygons by describing their attributes, including the number of sides, presence of right angles, regularity, lines of symmetry, and overall shape name. Examples discussed include regular and irregular pentagons, hexagons, and an unknown shape to be identified.
Geometry Lesson 5G3 Pam's Work
The document discusses classifying two-dimensional geometric shapes based on their properties, with a focus on quadrilaterals. It explains that shapes can belong to multiple categories and get more specific as they are classified. Examples are provided of different types of quadrilaterals like squares, rectangles, rhombuses, and trapezoids along with their defining properties.
Finding Shapes- Math
I would use this with my students. Having them create their own and finding their own shapes. I would use the first slides to have students come up to the board
Visualizing solid shapes
It an interesting ppt from with a child can understand the concept of solid shape and different views of a solid shapes from different sides .
thank you
Geometric shapes
This document defines and provides examples of various geometric shapes:
- Planes are flat surfaces defined by length and width.
- Prisms have identical parallel ends and flat faces along their length, like skyscrapers.
- Cubes are solid objects formed by 6 square faces joined at edges, with 8 corners called vertices.
- Pyramids have a polygon base and triangular sides meeting at an apex, like the pyramids in Egypt.
Mathematics quater 3 week 2 for Grade 6.ppt
Solid figures, also known as three-dimensional shapes or 3D shapes, are geometric objects that possess three dimensions: length, width, and height. These figures exist in the physical world and have volume, unlike two-dimensional shapes that only have area. Solid figures can be classified into various types based on their unique characteristics and properties.
Cube:
A cube is a six-faced solid figure with all faces being congruent squares.
All angles within a cube are right angles, and all edges are of equal length.
Cylinder:
A cylinder consists of two parallel circular bases connected by a curved surface.
The height of a cylinder is the perpendicular distance between the two bases.
Sphere:
A sphere is a perfectly round, three-dimensional object with all points on its surface equidistant from its center.
It has no vertices or edges, only a smooth, continuous surface.
Cone:
A cone has a circular base and a single curved surface that extends from the base to a point called the apex.
The height of a cone is the distance from the apex to the center of the base.
Rectangular Prism:
A rectangular prism, or rectangular parallelepiped, has six faces that are rectangles.
All angles within a rectangular prism are right angles, and opposite faces are parallel and congruent.
Pyramid:
A pyramid has a polygonal base and triangular sides that meet at a common vertex called the apex.
The height of a pyramid is the perpendicular distance from the base to the apex.
Solid figures play a crucial role in geometry, architecture, engineering, and various scientific disciplines. Understanding their properties and relationships is essential for solving problems related to volume, surface area, and spatial configurations. Additionally, these figures are encountered in everyday objects and structures, contributing to their significance in both theoretical and practical applications.
Geometrical figures
This document discusses different geometrical shapes and their characteristics. It begins with an activity where students find and identify circles, triangles, squares, and rectangles around the room. It then defines each shape, such as a circle as a set of points equidistant from the center, and a rectangle as a shape with two short sides and two long sides forming four right angles. It further explains different types of triangles, such as equilateral triangles with three equal sides and three equal angles. In the end, it prompts students to discuss possible combinations of triangle characteristics.
More Related Content
What's hot
Faces vertices edges
The document discusses the key geometric properties of cubes and cuboids. It notes that a cube has 6 square faces, 8 vertices, and 12 edges. Similarly, it states that a cuboid also has 6 faces, though they can be rectangular or a combination of rectangles and squares, and like a cube it has 8 vertices and 12 edges.
Total Surface Area of Prisms
The document discusses calculating the total surface area (TSA) of different 3D shapes by unfolding them into their 2D nets. It provides the TSA formulas and worked examples for rectangular prisms, triangular prisms, cylinders, and square pyramids. Engineers, builders and others use TSA to determine material needs like paint or carpet for projects. The document emphasizes that TSA is an area measurement, not a volume.
Properties of triangles
1) The document discusses geometry concepts related to angles of triangles including the triangle angle sum theorem, exterior angle theorem, and finding measures of unknown angles using known information.
2) Key details include that the sum of the interior angles of any triangle is 180 degrees, and the measure of an exterior angle is equal to the sum of the remote interior angles.
3) Examples are provided to demonstrate using these theorems to find the measures of missing angles in different triangle scenarios.
Parts of a circle
This document defines and describes the key terms and concepts related to parts of a circle, including the center, radius, chord, diameter, arc, semicircle, circumference, secant line, tangent line, central angle, and inscribed angle. It explains that a circle is the set of all points at a fixed distance from a given center point, and defines other geometric shapes and measurements within or relating to the circular shape, such as radii, diameters, arcs of different lengths, and lines that intersect the circle.
Maruja Mallo
Maruja Mallo was a Spanish painter born in 1902 in Vivero, Spain. She had a romance with poet Rafael Alberti in 1925. In the 1930s, she had her first exhibition in Paris and taught in Spain. During the Spanish Civil War in 1936, she fled to Argentina. She returned to Spain in the 1960s. Maruja Mallo died in 1995 in Madrid and was known for her paintings including "Las uvas" and "La sorpresa del trigo."
Three dimensional figures
This document defines and describes various three-dimensional figures. It begins by defining 3D figures as solid objects that have length, width, and height. The parts of 3D figures are then identified as surfaces, faces, bases, edges, corners, and vertices. Examples are provided of common 3D shapes like cubes, spheres, cones, cylinders, pyramids, and rectangular prisms along with their characteristics and real-world examples. The document aims to build understanding of 3D geometry terms and the attributes of different three-dimensional shapes.
Maruja mallo
Maruja Mallo was a Spanish painter born in 1902 as Ana María González Mallo in Viveiro, Spain. She studied fine arts in Madrid where she met several famous artists. In the 1930s, she began focusing her artwork on farmers and fishermen, but had to flee to Buenos Aires during the Spanish Civil War in 1936. While in Argentina, she was inspired by the beaches to include geometric sea elements in her brightly colored paintings and also created a series of mask paintings. She lived in America for 25 years before returning to Spain in 1965.
Paul klee
Paul Klee nació en una familia de músicos, aunque pronto descubrió que le gustaba más la pintura. Estudió en una escuela de arte para aprender a ser un buen pintor y viajó mucho, descubriendo que le gustaban los colores. Finalmente se convirtió en un pintor muy famoso cuyas obras se exhiben en muchos museos.
Brittos presentation
Romero Britto is a Brazilian artist born in 1963 who combines elements of cubism, pop art, and graffiti in his vibrant, colorful works. Britto began drawing and painting at a young age and had his first art show in 1979, though he was unsure if he could succeed as an artist. He later studied art in Europe after realizing he could not continue down the path of law school. Britto is now famous worldwide for his celebratory works featuring hearts and familiar characters painted in a stylized, geometric manner that encourages creativity in viewers.
Henry Moore
Henry Moore was a British sculptor from Yorkshire active from 1898 to 1986. He used drawing studies as references for his larger public sculptures. By adapting shapes from both the internal and external human body, Moore created anthropomorphic sculptures that explored the human form in abstracted ways.
Drafting the fornt part of the skirt
The document provides step-by-step instructions for drafting a basic skirt pattern. It involves marking reference points on the drafting paper based on body measurements and connecting those points with lines and curves to create the skirt shape. Key steps include marking points for waist, hip, and hem measurements then connecting them to create the skirt front and back patterns. Pocket and zipper placement are also indicated on the front pattern.
Parts of a circle
The document defines a circle as a closed curve where all points are equidistant from the center. It lists and describes the main parts of a circle, including the radius, diameter, chord, tangent line, secant line, central angle, and inscribed angle. The radius is the line from the center to the circumference, the diameter passes through the center and is twice the length of the radius, and a chord connects two points on the circle.
Circles
This document defines and explains key terms and concepts related to circles in geometry. It discusses what a circle is, the history of circles, and important circle terminology like diameter, radius, chord, arc, sector, and segment. It also covers theorems about relationships between chords, tangents, secants, and angles in circles. Key ideas are that a circle is a set of points equidistant from the center, and that circles have been an important mathematical concept throughout history.
Xilografia
La xilografía es la técnica de impresión más antigua utilizando planchas de madera grabadas. Se originó en China y se perfeccionó en Japón, donde alcanzó su máxima expresión. Consiste en tallar la madera para eliminar las zonas que no se quieren imprimir y dejar las líneas del dibujo, que se entintan para pasar la imagen al papel. Fue muy popular en Japón para imprimir libros y estampas ukiyo-e de la vida cotidiana.
What's hot (14)
Similar to Dream Catcher Lesson Plan
1.pptx
This document provides information about 2D and 3D shapes including their properties such as sides, edges, vertices, area and perimeter. It defines parallel and perpendicular lines and discusses different types of quadrilaterals, polygons, and 3D shapes such as prisms and pyramids. Examples are provided to demonstrate how to identify shapes and calculate their area and perimeter. Key terms are defined throughout including faces, edges, vertices, regular and irregular polygons.
Classifying polygons
The document provides guidance on classifying different types of polygons by describing their attributes, including the number of sides, presence of right angles, regularity, lines of symmetry, and overall shape name. Examples discussed include regular and irregular pentagons, hexagons, and an unknown shape to be identified.
Geometry Lesson 5G3 Pam's Work
The document discusses classifying two-dimensional geometric shapes based on their properties, with a focus on quadrilaterals. It explains that shapes can belong to multiple categories and get more specific as they are classified. Examples are provided of different types of quadrilaterals like squares, rectangles, rhombuses, and trapezoids along with their defining properties.
Finding Shapes- Math
I would use this with my students. Having them create their own and finding their own shapes. I would use the first slides to have students come up to the board
Visualizing solid shapes
It an interesting ppt from with a child can understand the concept of solid shape and different views of a solid shapes from different sides .
thank you
Geometric shapes
This document defines and provides examples of various geometric shapes:
- Planes are flat surfaces defined by length and width.
- Prisms have identical parallel ends and flat faces along their length, like skyscrapers.
- Cubes are solid objects formed by 6 square faces joined at edges, with 8 corners called vertices.
- Pyramids have a polygon base and triangular sides meeting at an apex, like the pyramids in Egypt.
Mathematics quater 3 week 2 for Grade 6.ppt
Solid figures, also known as three-dimensional shapes or 3D shapes, are geometric objects that possess three dimensions: length, width, and height. These figures exist in the physical world and have volume, unlike two-dimensional shapes that only have area. Solid figures can be classified into various types based on their unique characteristics and properties.
Cube:
A cube is a six-faced solid figure with all faces being congruent squares.
All angles within a cube are right angles, and all edges are of equal length.
Cylinder:
A cylinder consists of two parallel circular bases connected by a curved surface.
The height of a cylinder is the perpendicular distance between the two bases.
Sphere:
A sphere is a perfectly round, three-dimensional object with all points on its surface equidistant from its center.
It has no vertices or edges, only a smooth, continuous surface.
Cone:
A cone has a circular base and a single curved surface that extends from the base to a point called the apex.
The height of a cone is the distance from the apex to the center of the base.
Rectangular Prism:
A rectangular prism, or rectangular parallelepiped, has six faces that are rectangles.
All angles within a rectangular prism are right angles, and opposite faces are parallel and congruent.
Pyramid:
A pyramid has a polygonal base and triangular sides that meet at a common vertex called the apex.
The height of a pyramid is the perpendicular distance from the base to the apex.
Solid figures play a crucial role in geometry, architecture, engineering, and various scientific disciplines. Understanding their properties and relationships is essential for solving problems related to volume, surface area, and spatial configurations. Additionally, these figures are encountered in everyday objects and structures, contributing to their significance in both theoretical and practical applications.
Geometrical figures
This document discusses different geometrical shapes and their characteristics. It begins with an activity where students find and identify circles, triangles, squares, and rectangles around the room. It then defines each shape, such as a circle as a set of points equidistant from the center, and a rectangle as a shape with two short sides and two long sides forming four right angles. It further explains different types of triangles, such as equilateral triangles with three equal sides and three equal angles. In the end, it prompts students to discuss possible combinations of triangle characteristics.
Properties of 2_d_3d_shapes
The document describes various 2D and 3D shapes. It defines key properties such as faces, edges, vertices, parallel and perpendicular lines. It provides examples of common 3D shapes like cubes, spheres, pyramids and discusses which have parallel/perpendicular faces and edges. The document also covers 2D plane shapes including polygons, quadrilaterals and gives examples like rectangles, squares, rhombus. It asks the reader to name shapes with 7, 9 or 10 sides and examples of triangles.
Squares & rhombuspt2
This document compares and contrasts squares and rhombuses. It defines a rhombus as a quadrilateral with four equal sides and explains how to find the area and perimeter of a rhombus. A square is defined as a quadrilateral with four equal sides that are also right angles. The document provides fun facts about both shapes and explains how to find the area of a square by squaring one of its sides.
Symmetry greta
This is a PowerPoint I prepared during my Teaching Practice on Symmetry. Not all slides are original !! It covers the whole symmetry topic :) Hope you find it useful !
Symmetry: Lines, Reflection, Rotation
This is a PowerPoint presentation I put together for my Final Teaching Practice.
It covers the whole symmetry topic : identifying lines of symmetry, reflecting in symmetry line and rotational symmetry.
Not all slides are original - some of the slides were adapted from PowerPoints found on TES Resources however the amalgamation and several slides are original.
I hope it will be useful :)
UNIT 8 lesson 8.1 g7.pptx
Photosystem II captures and transfers energy.
– chlorophyll absorbs
energy from sunlight
– energized electrons
enter electron
transport chain
– water molecules are
split
– oxygen is released as
waste
– hydrogen ions are
transported across
thylakoid membrane
4.1 Chemical Energy and ATP
• Photosystem I captures energy and produces energycarrying molecules.
– chlorophyll absorbs
energy from sunlight
– energized electrons
are used to make
NADPH
– NADPH is transferred
to light-independent
reactions
4.1 Chemical Energy and ATP
• The light-dependent reactions produce ATP.
– hydrogen ions flow through a channel in the thylakoid
membrane
– ATP synthase attached to the channel makes ATP
4.1 Chemical Energy and ATP
• Light-independent
reactions occur in the
stroma and use CO2
molecules.
The second stage of photosynthesis uses energy from
the first stage to make sugars.
4.1 Chemical Energy and ATP
• A molecule of glucose is formed as it stores some of the
energy captured from sunlight.
– carbon dioxide molecules enter the Calvin scrdeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeePhotosystem II captures and transfers energy.
– chlorophyll absorbs
energy from sunlight
– energized electrons
enter electron
transport chain
– water molecules are
split
– oxygen is released as
waste
– hydrogen ions are
transported across
thylakoid membrane
4.1 Chemical Energy and ATP
• Photosystem I captures energy and produces energycarrying molecules.
– chlorophyll absorbs
energy from sunlight
– energized electrons
are used to make
NADPH
– NADPH is transferred
to light-independent
reactions
4.1 Chemical Energy and ATP
• The light-dependent reactions produce ATP.
– hydrogen ions flow through a channel in the thylakoid
membrane
– ATP synthase attached to the channel makes ATP
4.1 Chemical Energy and ATP
• Light-independent
reactions occur in the
stroma and use CO2
molecules.
The second stage of photosynthesis uses energy from
the first stage to make sugars.
4.1 Chemical Energy and ATP
• A molecule of glucose is formed as it stores some of the
energy captured from sunlight.
– carbon dioxide molecules enter the Calvin Photosystem II captures and transfers energy.
– chlorophyll absorbs
energy from sunlight
– energized electrons
enter electron
transport chain
– water molecules are
split
– oxygen is released as
waste
– hydrogen ions are
transported across
thylakoid membrane
4.1 Chemical Energy and ATP
• Photosystem I captures energy and produces energycarrying molecules.
– chlorophyll absorbs
energy from sunlight
– energized electrons
are used to make
NADPH
– NADPH is transferred
to light-independent
reactions
4.1 Chemical Energy and ATP
• The light-dependent reactions produce ATP.
– hydrogen ions flow through a channel in the thylakoid
membrane
– ATP synthase attached to the channel makes ATP
Quadrilaterals
This document defines and discusses various types of quadrilaterals, including their properties and theorems. It begins by defining a quadrilateral as any 4-sided shape and discusses convex vs concave quadrilaterals. It then covers the angle sum property and defines specific types of quadrilaterals like squares, rectangles, parallelograms, rhombi, trapezoids, and kites. The document concludes by proving the midpoint theorem, which states that the midpoint of a line segment divides it into two congruent halves and is parallel to the original segment.
Classify polygons
This document defines and classifies different types of polygons. It begins by defining a polygon as a closed figure formed by line segments that intersect only at endpoints. Polygons are then classified as convex, concave, regular, or irregular based on their angles and sides. Specific polygons are also named based on the number of sides, such as triangles having 3 sides, quadrilaterals having 4 sides, etc. Regular polygons are defined as having all congruent sides and angles. The document also provides formulas for calculating the area of regular polygons based on their number of sides and apothem length. Triangles and quadrilaterals are further classified based on side lengths and angle measures.
3D SHAPES.pptx
This document provides an overview of 3-dimensional shapes, including definitions, examples, and key terms. It begins by defining dimensions and reviewing 0D, 1D, and 2D shapes. It then defines 3D shapes as having length, width, and height. Important 3D shape terms are introduced, such as faces, edges, and vertices. Common 3D shapes - cubes, cuboids, cones, cylinders, and spheres - are defined with their geometric properties. The document emphasizes that studying 3D shapes helps students develop visual thinking and understand relationships between shapes and sizes in the real world.
UNIT 8 lesson 8.1 grade 7.pptx
rvderRFVERVGERVDFTYREWERTYUJIKLPKJHGFDSDFGHJKL;KJHGFDSDRTYUIOKJHGFDSAERTYUIOKJHGFDSE567IOPLKJNBVFDSW34RTYUIKJHGFDSEDRTYUIOKJNBVCXSERTYUIOLKMJNBVCDXSASERTYUIOL;KJNBHGVFDSD
Math 7 triangles and quadrilaterals
This document provides information about classifying triangles according to their sides and angles. It discusses scalene, isosceles, equilateral, acute, right, and obtuse triangles. Examples of classifying triangles based on their properties are provided. Students are instructed to draw triangles with given side or angle measures and classify triangles they draw on their own. The document also covers properties of quadrilaterals such as parallelograms, rectangles, rhombuses, squares, and trapezoids.
Introduction of Quadrilaterals
This document introduces different types of quadrilaterals. It defines a quadrilateral as a 2D shape with four straight sides. The main types discussed are rectangles, rhombi, squares, parallelograms, trapezoids, kites, and irregular quadrilaterals. It provides characteristics to define each type, such as sides of equal length or right angles. Additionally, it presents a family tree showing how some quadrilaterals are subsets of others, like squares being a type of rectangle. In conclusion, the document establishes the foundation for understanding different quadrilateral categories.
Similar to Dream Catcher Lesson Plan (20)
Dream Catcher Lesson Plan
- 1. WHAT IS A DREAM CATCHER? • Dream Catchers are meant to “catch” your bad dreams • They can be made many different ways
- 2. TODAY: We will be making dream catchers using Geometric Shapes! By the end of this activity, I want each and every one of you to be able to identify at LEAST two different parts of the shapes you choose for your dream catcher. For example…
- 4. LET’S LOOK AT THE DIFFERENT TWO- DIMENSIONAL SHAPES
- 5. WHAT IS A POLYGON? A plane (flat surface) shape with straight sides KEY TERMS RIGHT ANGLE AN ANGLE THAT MEASURES 90 DEGREES A PERFECT “L” WHAT IS A VERTEX? A vertex (plural: vertices) is a point where two or more straight lines meet
- 6. ARE THESE SHAPES POLYGONS? YES YES NO, EXPLAI N WHY YES
- 7. A SQUARE…. • Is a polygon • Has 4 sides of equal (the same) length • Has 4 right angle corners • Has 4 vertices **When shapes have sides that are the same length, the correct term to use is------Congruent (con- groo-ent)**
- 8. A TRIANGLE…. • Is a polygon • Has three congruent sides • Has three angles • Has how many vertices?
- 9. A HEXAGON…. • Is a polygon • Has six congruent sides • Has how many angles? • Has six vertices
- 10. A STAR…. • Is a polygon • Has 10 congruent sides • Has 10 angles (can you find them?) • Has 10 vertices