Lesson 10- assembly design-multibladed rotor and rotor casing -help files ppt

•

0 likes•68 views

This tutorial on assembly design of a multi bladed turbine rotor with its casing helps the engineering students and working professionals to know completely the procedure involved in the CATIA assembly design of a turbine rotor with any number of blades and a casing. In the process of learning this assembly , the viewers will know how to start the assembly design, how to bring the components of the assembly and also they will know how to rename the parts going into properties. They will also learn about moving the individual components either by moving components with existing positioning or by using compass. In the process of assembling components they will know how to fix a component which is not moving, also learn about coincidence constraint and offset constraint. By doing the above procedures, the assembly will be ready for kinematics part and corresponding animation.

Engineering

COURSE ON ADVANCED CATIA V5
EXERCISES ON WIREFRAME & SURFACE DESIGN
LESSON-10
STEP BY STEP PROCEDURE
CATIA Assembly Design
Multi Bladed Rotor with Casing
Prepared
By
Dr.B.GURUDATT
(Former Professor & Head)
Department of Mechanical Engineering
Bangalore Institute Of Technology, K R Road, Bangalore-4)
Professor
Department of Mechanical Engineering
Nitte Meenakshi Institute Of Technology, Yelahanka
Bangalore-560064

CATIA SURFACE DESIGN- Lesson-10 Help File Slides
Prepared By Dr.B.Gurudatt, Professor, NMIT

Lesson 10- assembly design-multibladed rotor and rotor casing -help files ppt

This tutorial on surface design of a turbine rotor with multi blades helps the engineering students and working professionals to know completely the procedure involved in the CATIA surface design of a turbine rotor with multiple blades. In the process of learning this surface design of multi bladed rotor, they will know about various commands such as circle, extrude, hide and unhide, point on curve with respect to distance, line command, fill surface command, changing to part design, giving thickness for blade, circular pattern, closed surface command, revolve command, pocket command.

Lesson 13- surface and shape design-soap box design-help files ppt

Nitte Meenakshi Institute Of Technology

This tutorial on surface design of a Soap Box helps the engineering students and working professionals to know completely the exact procedure involved in the surface design of a Soap box. In the process of learning this surface design of a Soap box, they will know about various features such as sketcher design, project 3D element, converting into axis, drawing profile, sweep command, fill surface, sketching for a hole, extrude surface, creation of rectangular pattern both on the right and left part of extrusion, trim command, trimming of main extrude and left and right rectangular patterns, join command.

Lesson 9- surface design-multi bladed rotor casing design - help files ppt

Nitte Meenakshi Institute Of Technology

This tutorial on surface design of a turbine rotor casing with multi blades helps the engineering students and working professionals to know completely the procedure involved in the CATIA surface design of a casing. In the process of learning this surface design of a casing of a multi bladed rotor, they will know about various commands such as circle, plain with offset, project 3D element, conveting the projection into axis, three point arc, coincidence command, revolution command , switching to part design and learn about thickness command.

Lesson 12- surface design-tennis racket design-help files ppt

Nitte Meenakshi Institute Of Technology

Lesson 6- assembly design-rotor with eight blades and rotor casing -help fil...

Nitte Meenakshi Institute Of Technology

This tutorial on assembly design of a turbine rotor with eight blades and casing helps the engineering students and working professionals to know completely the procedure involved in the CATIA assembly design of a turbine rotor with eight blades and a casing. In the process of learning this assembly , the viewers will know how to start the assembly design, how to bring the components of the assembly and also they will know how to rename the parts going into properties. They will also learn about moving the individual components either by moving components with existing positioning or by using compass. In the process of assembling components they will know how to fix a component which is not moving, also learn about coincidence constraint and offset constraint. By doing the above procedures, the assembly will be ready for kinematics part and corresponding animation.

Lesson 4- surface design-rotor with 8 blades-help files ppt

Nitte Meenakshi Institute Of Technology

Lesson 11- multi bladed rotor assembly -Catia kinematics & animation -help fi...

Nitte Meenakshi Institute Of Technology

Lesson 7- kinematics & animation of bladed rotor inside the casing-help files...

Nitte Meenakshi Institute Of Technology

This tutorial on DMU (Digital Mock-up) kinematics of a rotor with eight blades and casing helps the engineering students and working professionals to know completely the procedure involved in the CATIA assembly kinematics with complete procedure to animate the assembly. In the process of learning this CATIA DMU kinematics , the viewers will know how to open the DMU kinematics and exact procedure to simulate or animate the bladed rotor with in the casing. They will also know about how to do simulation in a loop…. The rotor will be continuously rotating inside the casing …once clockwise and once anticlockwise…in the way we have given commands.

This tutorial on surface design of a Water Jug helps the engineering students and working professionals to know completely the exact procedure involved in the surface design of a Water Jug. In the process of learning this surface design of a Water Jug, they will know about various features such as complex sketcher design, Point command, Join command, forming the neck portion of water jug using multi section surface, replace command, forming the body portion, base portion, join command, hide/show command, changing the colour, designing the handle, plane perpendicular to curve, ellipse command, trim command etc.

Lesson 14- surface design-centrifugal impeller -help files ppt

Nitte Meenakshi Institute Of Technology

This tutorial on Surface design of centrifugal impeller helps the engineering students and working professionals to know completely the exact procedure involved in the surface design of a centrifugal impeller. In the process of learning this surface design of a centrifugal impeller, they will know about various features and how to toggle between part design and surface design. They will know how to apply a point on curve with ratio options, Helix with pitch and length options, line commands, multi section surface, giving thickness going back to part design, circular pattern, going back to part design, sketching, pocket, etc.

Lesson- 3 - Surface design-umbrella design-help files ppt

Nitte Meenakshi Institute Of Technology

Lesson 2 - Surface design-multi section-help files ppt

Nitte Meenakshi Institute Of Technology

This basic tutorial on different commands of CATIA surface design helps the engineering students and working professionals to know completely the basics involved in the CATIA surface design. In the process of learning this surface design on multi section surface, they will know about various commands involving multi section surface operations such as circle. cutting a circle using axis commands, construction of additional planes, project 3D elements on a plane and hence converting it into axis, spline, coincidence applications for spline ends, operation of multi section surface, applying thickness switching to part design etc

Lesson 1 - Surface design-basic commands-help files ppt

Nitte Meenakshi Institute Of Technology

This basic tutorial on different commands of CATIA surface design helps the engineering students and working professionals to know completely the basics involved in the CATIA surface design. In the process of learning this surface design , they will know about Ellipse command, extrude, point, Fill surface, circle, extrude, trim, fill surface, join surface , closed surface ,section using spline command and split commands. By implementing all these commands in this design , students and working professionals will have very good knowledge on Wireframe and surface design basic concepts.

Mouse tutorials/design -Using CATIA Wireframe and Surface Design-Exercise -1

Nitte Meenakshi Institute Of Technology

ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...

Mukeshwaran Balu

Understanding Inductive Bias in Machine Learning

SUTEJAS

This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models. The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees. By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.

Properties Railway Sleepers and Test.pptx

MDSABBIROJJAMANPAYEL

Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...

University of Maribor

Slides from talk presenting: Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking. Presentation at IcETRAN 2024 session: "Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation" IEEE Slovenia GRSS IEEE Serbia and Montenegro MTT-S IEEE Slovenia CIS 11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING 3-6 June 2024, Niš, Serbia

Question paper of renewable energy sources

mahammadsalmanmech

Literature Review Basics and Understanding Reference Management.pptx

Dr Ramhari Poudyal

5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...

ihlasbinance2003

DfMAy 2024 - key insights and contributions

gestioneergodomus

Embedded machine learning-based road conditions and driving behavior monitoring

IJECEIAES

Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.

ACEP Magazine edition 4th launched on 05.06.2024

Rahul

This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.

International Conference on NLP, Artificial Intelligence, Machine Learning an...

gerogepatton

International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.

Generative AI leverages algorithms to create various forms of content

Hitesh Mohapatra

Harnessing WebAssembly for Real-time Stateless Streaming Pipelines

Christina Lin

Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.

Technical Drawings introduction to drawing of prisms

heavyhaig

A review on techniques and modelling methodologies used for checking electrom...

nooriasukmaningtyas

The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.

More from Nitte Meenakshi Institute Of Technology

Lesson 1 - surface design-basic commands-voice help files ppt

Nitte Meenakshi Institute Of Technology

Lesson 15- surface design-Water jug modeling -help files ppt

Nitte Meenakshi Institute Of Technology

Lesson 14- surface design-centrifugal impeller -help files ppt

Nitte Meenakshi Institute Of Technology

Lesson- 3 - Surface design-umbrella design-help files ppt

Nitte Meenakshi Institute Of Technology

Lesson 2 - Surface design-multi section-help files ppt

Nitte Meenakshi Institute Of Technology

Lesson 1 - Surface design-basic commands-help files ppt

Nitte Meenakshi Institute Of Technology

This basic tutorial on different commands of CATIA surface design helps the engineering students and working professionals to know completely the basics involved in the CATIA surface design. In the process of learning this surface design , they will know about Ellipse command, extrude, point, Fill surface, circle, extrude, trim, fill surface, join surface , closed surface ,section using spline command and split commands. By implementing all these commands in this design , students and working professionals will have very good knowledge on Wireframe and surface design basic concepts.

Mouse tutorials/design -Using CATIA Wireframe and Surface Design-Exercise -1

Nitte Meenakshi Institute Of Technology

More from Nitte Meenakshi Institute Of Technology (7)

Lesson 1 - surface design-basic commands-voice help files ppt

Lesson 15- surface design-Water jug modeling -help files ppt

Lesson 14- surface design-centrifugal impeller -help files ppt

Lesson- 3 - Surface design-umbrella design-help files ppt

Lesson 2 - Surface design-multi section-help files ppt

Lesson 1 - Surface design-basic commands-help files ppt

Mouse tutorials/design -Using CATIA Wireframe and Surface Design-Exercise -1

Recently uploaded

ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...

Mukeshwaran Balu

Understanding Inductive Bias in Machine Learning

SUTEJAS

Properties Railway Sleepers and Test.pptx

MDSABBIROJJAMANPAYEL

Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...

University of Maribor

Question paper of renewable energy sources

mahammadsalmanmech

Literature Review Basics and Understanding Reference Management.pptx

Dr Ramhari Poudyal

5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...

ihlasbinance2003

DfMAy 2024 - key insights and contributions

gestioneergodomus

Embedded machine learning-based road conditions and driving behavior monitoring

IJECEIAES

ACEP Magazine edition 4th launched on 05.06.2024

Rahul

International Conference on NLP, Artificial Intelligence, Machine Learning an...

gerogepatton

Generative AI leverages algorithms to create various forms of content

Hitesh Mohapatra

Harnessing WebAssembly for Real-time Stateless Streaming Pipelines

Christina Lin

Technical Drawings introduction to drawing of prisms

heavyhaig

A review on techniques and modelling methodologies used for checking electrom...

nooriasukmaningtyas

Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf

RadiNasr

CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT

jpsjournal1

The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been referred to as the "New Great Game." This research centres on the power struggle, considering geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil politics, and conventional and nontraditional security are all explored and explained by the researcher. Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role in Central Asia. This study adheres to the empirical epistemological method and has taken care of objectivity. This study analyze primary and secondary research documents critically to elaborate role of china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade, pipeline politics, and winning states, according to this study, thanks to important instruments like the Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study, China is seeing significant success in commerce, pipeline politics, and gaining influence on other governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai Cooperation Organisation and the Belt and Road Economic Initiative.

哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样

insn4465

原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma 1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700 留信网认证的作用: 1:该专业认证可证明留学生真实身份 2:同时对留学生所学专业登记给予评定 3:国家专业人才认证中心颁发入库证书 4:这个认证书并且可以归档倒地方 5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息 6:个人职称评审加20分 7:个人信誉贷款加10分 8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才

CSM Cloud Service Management Presentarion

rpskprasana

Advanced control scheme of doubly fed induction generator for wind turbine us...

IJECEIAES

This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.

Recently uploaded (20)

ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...

Understanding Inductive Bias in Machine Learning

Properties Railway Sleepers and Test.pptx

Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...

Question paper of renewable energy sources

Literature Review Basics and Understanding Reference Management.pptx

5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...

DfMAy 2024 - key insights and contributions

Embedded machine learning-based road conditions and driving behavior monitoring

ACEP Magazine edition 4th launched on 05.06.2024

International Conference on NLP, Artificial Intelligence, Machine Learning an...

Generative AI leverages algorithms to create various forms of content

Harnessing WebAssembly for Real-time Stateless Streaming Pipelines

Technical Drawings introduction to drawing of prisms

A review on techniques and modelling methodologies used for checking electrom...

Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf

CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT

哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样

CSM Cloud Service Management Presentarion

Advanced control scheme of doubly fed induction generator for wind turbine us...

Lesson 10- assembly design-multibladed rotor and rotor casing -help files ppt

1. COURSE ON ADVANCED CATIA V5 EXERCISES ON WIREFRAME & SURFACE DESIGN LESSON-10 STEP BY STEP PROCEDURE CATIA Assembly Design Multi Bladed Rotor with Casing Prepared By Dr.B.GURUDATT (Former Professor & Head) Department of Mechanical Engineering Bangalore Institute Of Technology, K R Road, Bangalore-4) Professor Department of Mechanical Engineering Nitte Meenakshi Institute Of Technology, Yelahanka Bangalore-560064

2. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

3. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

4. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

5. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

6. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

7. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

8. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

9. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

10. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

11. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

12. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

13. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

14. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

15. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

16. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

17. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

18. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

19. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

20. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

21. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

22. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

23. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

24. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

25. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

26. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

27. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

28. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

29. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

30. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

31. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

32. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

33. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

34. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

35. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

36. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

37. CATIA SURFACE DESIGN- Lesson-10 Help File Slides Prepared By Dr.B.Gurudatt, Professor, NMIT

Lesson 10- assembly design-multibladed rotor and rotor casing -help files ppt

Recommended

Recommended

More Related Content

More from Nitte Meenakshi Institute Of Technology

More from Nitte Meenakshi Institute Of Technology (7)

Recently uploaded

Recently uploaded (20)

Lesson 10- assembly design-multibladed rotor and rotor casing -help files ppt