Leed™ At The Jobsite
•Download as PPT, PDF•
1 like•1,143 views
This document provides tips for contractors to successfully implement LEED certification on construction projects. It emphasizes the importance of getting buy-in from all parties early, clearly defining LEED requirements, and maintaining thorough documentation throughout the project. Proper submittals, clear communication, and designating a LEED champion are key to avoiding common problems and ensuring the certification process goes smoothly. The document recommends orienting subcontractors, tracking waste diversion, and keeping the LEED binder updated to demonstrate ongoing compliance.
Report
Share
Report
Share
![LEED ™ Requires “Teamwork” ,[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Smart Agreements and Green Litigation Risks
This presentation - given to the New Orleans Green Legal Matters Conference - analyzes the risks inherent in green building projects, and those contractual tricks that can be used to limit or minimize those risks. I gave this presentation on October 14th, joined by James d'Entremont of Phelps Dunbar.
Integrated project delivery case studies
This document provides a case study of the Autodesk Inc. AEC Solutions Division Headquarters project in Waltham, Massachusetts. The project used an Integrated Project Delivery (IPD) approach with early involvement of the owner, architect, builder, and major subcontractors. A multi-party contract established a shared risk/reward structure and collaborative decision-making teams. Specific, quantifiable goals were jointly established to measure the project's success. The project was completed within its tight schedule and budget, highlighting the benefits of the IPD approach.
Integrated project delivery for more effective development
Integrated Project Delivery (IPD) is a project delivery approach that integrates people, systems, business structures and practices into a process that collaboratively harnesses the talents and insights of all participants to optimize project results, increase value to the owner, reduce waste, and maximize efficiency through all phases of design, fabrication, and construction.
LEEDigation: LEEDs Impact on the Practice of Law
How will LEED and Green Building impact the practice of law, and litigation in general? This presentation looks to answer that question. To be given by Chris Hill and Scott Wolfe at the Green Legal Matters conference this upcoming September, these are the slides that will (likely) be used.
Earthern buildings
Precision Structural Engineering provides structural engineering design services for sustainable building projects, including earthbag buildings. They have extensive experience in green building design and structural engineering. They can provide design and engineering services to help clients with earthbag and natural building projects obtain necessary permits. Their engineers are familiar with building code requirements and work to merge codes with sustainable building practices. They provide structural designs, details, and drawings to facilitate the construction process.
A Practical Guide to the Construction (Design and Management) Regulations 2015
The Construction (Design and Management) Regulations 2015 came into effect in April 2015 and introduced several significant changes from the 2007 regulations. Key changes include:
- Replacing the CDM Coordinator role with a new 'Principal Designer' role to have more influence over design.
- Requiring written construction phase plans for all projects, not just notifiable ones.
- Applying the regulations to domestic clients who can delegate duties to contractors.
- Introducing transitional provisions for projects that began before April 2015.
- Awaiting new, shorter guidance from the HSE to replace the abolished Approved Code of Practice.
David kissack
A highly energetic and assiduous individual, David Kissack attended Tampa Technical Institute to pursue Associate of Arts degree in Architectural CADD. After that, he graduated Cum Laude, with Bachelor of Science degree in Mechanical Engineering, from Florida Atlantic University.
Avoiding Dental Construction Disasters
The document discusses common pitfalls in dental construction projects and provides tips to avoid disasters. Some key risks include using an inexperienced or financially unstable general contractor, insufficient planning by the architect, and taking on more project than your budget can afford. It warns that choosing the lowest bid contractor due to cost alone can lead to change orders, corners being cut, liens being filed, and projects being abandoned. Instead, it recommends proper planning, qualifying the general contractor, and finding a bank experienced in construction lending that can help guide the process.
Recommended
Smart Agreements and Green Litigation Risks
This presentation - given to the New Orleans Green Legal Matters Conference - analyzes the risks inherent in green building projects, and those contractual tricks that can be used to limit or minimize those risks. I gave this presentation on October 14th, joined by James d'Entremont of Phelps Dunbar.
Integrated project delivery case studies
This document provides a case study of the Autodesk Inc. AEC Solutions Division Headquarters project in Waltham, Massachusetts. The project used an Integrated Project Delivery (IPD) approach with early involvement of the owner, architect, builder, and major subcontractors. A multi-party contract established a shared risk/reward structure and collaborative decision-making teams. Specific, quantifiable goals were jointly established to measure the project's success. The project was completed within its tight schedule and budget, highlighting the benefits of the IPD approach.
Integrated project delivery for more effective development
Integrated Project Delivery (IPD) is a project delivery approach that integrates people, systems, business structures and practices into a process that collaboratively harnesses the talents and insights of all participants to optimize project results, increase value to the owner, reduce waste, and maximize efficiency through all phases of design, fabrication, and construction.
LEEDigation: LEEDs Impact on the Practice of Law
How will LEED and Green Building impact the practice of law, and litigation in general? This presentation looks to answer that question. To be given by Chris Hill and Scott Wolfe at the Green Legal Matters conference this upcoming September, these are the slides that will (likely) be used.
Earthern buildings
Precision Structural Engineering provides structural engineering design services for sustainable building projects, including earthbag buildings. They have extensive experience in green building design and structural engineering. They can provide design and engineering services to help clients with earthbag and natural building projects obtain necessary permits. Their engineers are familiar with building code requirements and work to merge codes with sustainable building practices. They provide structural designs, details, and drawings to facilitate the construction process.
A Practical Guide to the Construction (Design and Management) Regulations 2015
The Construction (Design and Management) Regulations 2015 came into effect in April 2015 and introduced several significant changes from the 2007 regulations. Key changes include:
- Replacing the CDM Coordinator role with a new 'Principal Designer' role to have more influence over design.
- Requiring written construction phase plans for all projects, not just notifiable ones.
- Applying the regulations to domestic clients who can delegate duties to contractors.
- Introducing transitional provisions for projects that began before April 2015.
- Awaiting new, shorter guidance from the HSE to replace the abolished Approved Code of Practice.
David kissack
A highly energetic and assiduous individual, David Kissack attended Tampa Technical Institute to pursue Associate of Arts degree in Architectural CADD. After that, he graduated Cum Laude, with Bachelor of Science degree in Mechanical Engineering, from Florida Atlantic University.
Avoiding Dental Construction Disasters
The document discusses common pitfalls in dental construction projects and provides tips to avoid disasters. Some key risks include using an inexperienced or financially unstable general contractor, insufficient planning by the architect, and taking on more project than your budget can afford. It warns that choosing the lowest bid contractor due to cost alone can lead to change orders, corners being cut, liens being filed, and projects being abandoned. Instead, it recommends proper planning, qualifying the general contractor, and finding a bank experienced in construction lending that can help guide the process.
Surat warranty
The document is a template letter of total completion for a construction project. It indicates that a warranty review was completed and no outstanding issues were found, so contractual obligations are considered fully met with exception of any extended warranties. The letter serves to notify the contractor that the project is considered totally complete.
One Page Project Plan With Objectives And Cost Presentation Report Infographi...
“You can download this product from SlideTeam.net”
Here we present One Page Project Plan With Objectives And Cost Presentation Report Infographic PPT PDF Document one pager PowerPoint template. Wouldnt it be easy to track the progress of your project if you have a synchronized plan that would aid you in prioritizing and identifying the activities Obviously, it would be, this is why we have brought you this pre designed one pager project plan PowerPoint template. This amazingly curated project status one pager PowerPoint slide show will assist you in defining various parameters. Provide a comprehensive baseline of how the project is to be carried out and make it easy to understand for your audience. It includes different sections where you can jot down the project s name, the scope of statement, initiating date, the date of completion, and the overall progress of the project. Display the name of the managers responsible for handling the project taking the assistance of this customizable project management PowerPoint template. Track the performance of each task and shed a light over the status of each such task whether completed, in progress or not yet started. The pre developed PPT template being completely editable is so easy to use and can be altered as per the persons specific needs. Since, it is compatible with various Microsoft version it can be accessed from anywhere in the world. Grab this One Page Project Plan With Objectives And Cost Presentation Report Infographic PPT PDF Document one pager template now. https://bit.ly/2Zu8ZSN
Contractor
The general contractor is responsible for overseeing all aspects of a construction project from start to finish. They work closely with architects and subcontractors, soliciting bids, coordinating schedules, and ensuring work is completed on time and on budget. General contractors handle permitting, scheduling inspections, providing skilled labor, and addressing any issues that arise during construction. They aim to manage all facets of a project from initial planning through final completion.
LEEDigation: The Impact of LEED 3.0, Litigation & Building Regulation
Presentation at the 2010 Green Matters Conference in New Orleans, LA, scheduled for Friday, October 15th. Scott Wolfe is co-presenting this topic with Chris Hill, focusing on Litigation caused by or associated with the LEED Certification Process. This is the powerpoint presentation that will be used.
CDM 2015 Regulations for Construction Firms
The Construction (Design & Management) Regulations updated in 2015 spell some big changes to construction firms and their legal responsibilities. Find out how it might affect you
CDM 2015 - A quick summary
This document provides an overview of the key changes to the Construction Design and Management (CDM) regulations that will take effect in April 2015 in the UK. Some of the main changes include: 1) Projects will only need to be notified to the HSE if they last over 30 days with over 20 people on site, rather than 30 days or 500 person days; 2) Domestic projects involving two or more contractors will now be included; 3) The role of the CDM Coordinator will be replaced by the Principal Designer who will have design phase responsibilities. The client will have new duties including appointing the Principal Designer and Contractor and ensuring they fulfill their roles.
Profile of Bala
Mr. N. Balasubramaniam has over 15 years of experience in consulting, training, and architecting J2EE and enterprise solutions. He specializes in J2EE, SOA, EAI, and service virtualization and has worked with many organizations on Java-based applications. He also has expertise in performance monitoring and WAN optimization solutions from CA and Riverbed and often delivers training programs on these platforms. Mr. Balasubramaniam has worked with over 25 companies across various industries and brings best practices from the J2EE community to his consulting.
General Contractor Miami
Mastco Construction LLC.
Miami,FL
(305) 992-3845
http://www.mastcoconstruction.com/
With more than 7 years of experience in the construction and remodeling industry, Mastco Construction LLC provides to its customers the highest quality results in each of their projects. It is our business to provide competitive pricing, supreme quality, and on-time delivery.
Belco Electrical Brochure
Belco Electrical is an engineering consulting firm that provides quality design reviews, process management, and post-construction services to manage risk and ensure project success. They take a collaborative approach and focus on delivering independent, tailored advice and solutions. Their services include feasibility studies, electrical system design, lighting design, code compliance reviews, and dispute resolution. Belco Electrical aims to form reliable partnerships with clients and serve as an extension of their project teams.
Cdm 2015 13/04/15 ICE
This document summarizes a presentation given on the new CDM 2015 regulations in the UK. It outlines 10 key points speakers discussed: 1) Safety in the construction industry has improved significantly since 2007 but it remains dangerous; 2) The Principal Designer role mirrors the previous Principal Contractor role; 3) CDM regulations work alongside other health and safety laws; 4) Laws set a minimum standard and professionals should aim higher; 5) Client duties are significant; 6) Projects require integration and teamwork with the client's needs prioritized; 7) Health issues need repeated review; 8) Professionals must be competent and properly manage projects; 9) Training is available to demonstrate competence; 10) Registering demonstrates meeting defined health and
Dramatic Savings
Project Partners provides supplemental engineering staff to municipalities and public agencies. By bringing engineering projects in-house using Project Partners staff, one client saved $150,000 on a pipeline replacement project compared to consultant estimates of $250,000 to $300,000. Project Partners offers significant cost savings through lower billing rates while also providing experienced personnel and flexible resources to complete projects efficiently.
Construction Design And Management Regulations (Cdm2007) Presentation
CDM2007 - The Construction Design and Manangement regulations here is a brief overview on this piece of legsilation for Clients having construction work done.
Expectations seminar 8.16.10
This document provides an overview of expectations for remodeling a home presented by Nickolas Sosa, CEO of S3 Design Group. It discusses selecting a qualified contractor, the design and construction processes, contractor and client expectations, and finishing the project smoothly. The goal is to educate homeowners, develop an understanding of expectations, and build relationships that last through open communication and an emphasis on quality.
Operations class project
The document summarizes a project to relocate Autodesk's Massachusetts office to a new building in Waltham. The project objectives were to use public display space to showcase Autodesk technology, design the space to showcase Autodesk's development recommendations, and manage a limited budget and short timeline. The project utilized building information modeling (BIM) for 3D space mapping and integrated project delivery (IPD) for highly collaborative design between architects and contractors. Key objectives were to move 300 employees on schedule, create a case study for customers, and achieve LEED Platinum Certification for sustainable design. The project faced challenges including delays, scope changes, and balancing stakeholder needs but ultimately helped Autodesk with marketing materials
Bonny Resume ( Proc)
This document contains a curriculum vitae and summary of qualifications for Bonny Sam Oommen. It includes personal details, contact information, languages spoken, objective, work experience from 2006-2014 in procurement and contracts roles for various companies in Abu Dhabi, academic credentials, current roles and responsibilities, skills gained, strengths, sample projects and activities handled as a procurement and contracts engineer. The CV provides concise information on the professional's background and qualifications in a single document for employment purposes.
Reinvent your sports and leisure building
This webinar discusses the design of sports, leisure and hospitality buildings for schools, sports clubs and private members clubs. I looked at innovation, futureproofing of your building, storytelling, using architectural design to help you develop a strong brand, intangible assets, and how to design a tech enabled smart asset
ACH 231 Lecture 06 (Project Delivery)
The document discusses various project delivery methods and factors that influence their selection. It describes design-bid-build, design-build, fast track, and construction management at-risk and advisor methods. Key determinants of which method to choose include the owner's sophistication, project size and complexity, schedule vs. budget priorities, and bidding climate. Each method has advantages and disadvantages regarding costs, schedules, risk allocation, and relationships between parties.
ACH 231 Lecture 06 (Project Delivery)
The document discusses various project delivery methods and factors that influence their selection. It describes design-bid-build, design-build, fast-track construction, and construction management at-risk and as an advisor. Key determinants of delivery method include owner sophistication, project size/complexity, schedule vs. budget priorities, and bidding climate. Each method has advantages and disadvantages related to communication, cost control, risk allocation, and owner involvement.
LEED Green Associate Study Session #1
This is a summed up version of our first of four LEED Green Associate Training Sessions. The LEED Credentialing Study Sessions are a service that our club, Sustainable Build and Design has offered over the last two years, preparing over 30 LEED APs from BYU, industry, and nearby universities.
Large renovations and what you need to know 2010
This document provides an overview of what homeowners need to know when planning large renovations. It discusses the importance of planning goals and budgets, working with designers and contractors, obtaining necessary permits, dealing with construction impacts, and potential grants and rebates. The contractor, Wo-Built, specializes in innovative and green design/build renovations and aims to educate the public about best practices.
PASBA 2010 presentation
This deck was presented to the Pennsylvania School Boards Association (PSBA) in 2010. It addressed some commonly overlooked critical items in the planning and execution of construction projects which could improve the overall performance of the project and reduce the risk of disputes and claims.
Collaboration Efforts with LED Specifications - Reducing Confusion During Co...
In this presentation we will investigate the specification of LED luminaries and ways to communicate design intent through initial concern to Construction Administration. We will cover how much information is necessary in specs and drawings to facilitate an accurate bids and installation, reduce RFI's and maintain design integrity. We will also cover areas of concern where coordination is paramount to a successful project.
Presented by:
avatar for Jana Owens
Jana Owens, Electrical Engineer, Henderson Engineers & rienne Willcock, Lighting Designer, Illuminart
More Related Content
What's hot
Surat warranty
The document is a template letter of total completion for a construction project. It indicates that a warranty review was completed and no outstanding issues were found, so contractual obligations are considered fully met with exception of any extended warranties. The letter serves to notify the contractor that the project is considered totally complete.
One Page Project Plan With Objectives And Cost Presentation Report Infographi...
“You can download this product from SlideTeam.net”
Here we present One Page Project Plan With Objectives And Cost Presentation Report Infographic PPT PDF Document one pager PowerPoint template. Wouldnt it be easy to track the progress of your project if you have a synchronized plan that would aid you in prioritizing and identifying the activities Obviously, it would be, this is why we have brought you this pre designed one pager project plan PowerPoint template. This amazingly curated project status one pager PowerPoint slide show will assist you in defining various parameters. Provide a comprehensive baseline of how the project is to be carried out and make it easy to understand for your audience. It includes different sections where you can jot down the project s name, the scope of statement, initiating date, the date of completion, and the overall progress of the project. Display the name of the managers responsible for handling the project taking the assistance of this customizable project management PowerPoint template. Track the performance of each task and shed a light over the status of each such task whether completed, in progress or not yet started. The pre developed PPT template being completely editable is so easy to use and can be altered as per the persons specific needs. Since, it is compatible with various Microsoft version it can be accessed from anywhere in the world. Grab this One Page Project Plan With Objectives And Cost Presentation Report Infographic PPT PDF Document one pager template now. https://bit.ly/2Zu8ZSN
Contractor
The general contractor is responsible for overseeing all aspects of a construction project from start to finish. They work closely with architects and subcontractors, soliciting bids, coordinating schedules, and ensuring work is completed on time and on budget. General contractors handle permitting, scheduling inspections, providing skilled labor, and addressing any issues that arise during construction. They aim to manage all facets of a project from initial planning through final completion.
LEEDigation: The Impact of LEED 3.0, Litigation & Building Regulation
Presentation at the 2010 Green Matters Conference in New Orleans, LA, scheduled for Friday, October 15th. Scott Wolfe is co-presenting this topic with Chris Hill, focusing on Litigation caused by or associated with the LEED Certification Process. This is the powerpoint presentation that will be used.
CDM 2015 Regulations for Construction Firms
The Construction (Design & Management) Regulations updated in 2015 spell some big changes to construction firms and their legal responsibilities. Find out how it might affect you
CDM 2015 - A quick summary
This document provides an overview of the key changes to the Construction Design and Management (CDM) regulations that will take effect in April 2015 in the UK. Some of the main changes include: 1) Projects will only need to be notified to the HSE if they last over 30 days with over 20 people on site, rather than 30 days or 500 person days; 2) Domestic projects involving two or more contractors will now be included; 3) The role of the CDM Coordinator will be replaced by the Principal Designer who will have design phase responsibilities. The client will have new duties including appointing the Principal Designer and Contractor and ensuring they fulfill their roles.
Profile of Bala
Mr. N. Balasubramaniam has over 15 years of experience in consulting, training, and architecting J2EE and enterprise solutions. He specializes in J2EE, SOA, EAI, and service virtualization and has worked with many organizations on Java-based applications. He also has expertise in performance monitoring and WAN optimization solutions from CA and Riverbed and often delivers training programs on these platforms. Mr. Balasubramaniam has worked with over 25 companies across various industries and brings best practices from the J2EE community to his consulting.
General Contractor Miami
Mastco Construction LLC.
Miami,FL
(305) 992-3845
http://www.mastcoconstruction.com/
With more than 7 years of experience in the construction and remodeling industry, Mastco Construction LLC provides to its customers the highest quality results in each of their projects. It is our business to provide competitive pricing, supreme quality, and on-time delivery.
Belco Electrical Brochure
Belco Electrical is an engineering consulting firm that provides quality design reviews, process management, and post-construction services to manage risk and ensure project success. They take a collaborative approach and focus on delivering independent, tailored advice and solutions. Their services include feasibility studies, electrical system design, lighting design, code compliance reviews, and dispute resolution. Belco Electrical aims to form reliable partnerships with clients and serve as an extension of their project teams.
Cdm 2015 13/04/15 ICE
This document summarizes a presentation given on the new CDM 2015 regulations in the UK. It outlines 10 key points speakers discussed: 1) Safety in the construction industry has improved significantly since 2007 but it remains dangerous; 2) The Principal Designer role mirrors the previous Principal Contractor role; 3) CDM regulations work alongside other health and safety laws; 4) Laws set a minimum standard and professionals should aim higher; 5) Client duties are significant; 6) Projects require integration and teamwork with the client's needs prioritized; 7) Health issues need repeated review; 8) Professionals must be competent and properly manage projects; 9) Training is available to demonstrate competence; 10) Registering demonstrates meeting defined health and
Dramatic Savings
Project Partners provides supplemental engineering staff to municipalities and public agencies. By bringing engineering projects in-house using Project Partners staff, one client saved $150,000 on a pipeline replacement project compared to consultant estimates of $250,000 to $300,000. Project Partners offers significant cost savings through lower billing rates while also providing experienced personnel and flexible resources to complete projects efficiently.
Construction Design And Management Regulations (Cdm2007) Presentation
CDM2007 - The Construction Design and Manangement regulations here is a brief overview on this piece of legsilation for Clients having construction work done.
Expectations seminar 8.16.10
This document provides an overview of expectations for remodeling a home presented by Nickolas Sosa, CEO of S3 Design Group. It discusses selecting a qualified contractor, the design and construction processes, contractor and client expectations, and finishing the project smoothly. The goal is to educate homeowners, develop an understanding of expectations, and build relationships that last through open communication and an emphasis on quality.
What's hot (13)
One Page Project Plan With Objectives And Cost Presentation Report Infographi...
One Page Project Plan With Objectives And Cost Presentation Report Infographi...
LEEDigation: The Impact of LEED 3.0, Litigation & Building Regulation
LEEDigation: The Impact of LEED 3.0, Litigation & Building Regulation
Construction Design And Management Regulations (Cdm2007) Presentation
Construction Design And Management Regulations (Cdm2007) Presentation
Similar to Leed™ At The Jobsite
Operations class project
The document summarizes a project to relocate Autodesk's Massachusetts office to a new building in Waltham. The project objectives were to use public display space to showcase Autodesk technology, design the space to showcase Autodesk's development recommendations, and manage a limited budget and short timeline. The project utilized building information modeling (BIM) for 3D space mapping and integrated project delivery (IPD) for highly collaborative design between architects and contractors. Key objectives were to move 300 employees on schedule, create a case study for customers, and achieve LEED Platinum Certification for sustainable design. The project faced challenges including delays, scope changes, and balancing stakeholder needs but ultimately helped Autodesk with marketing materials
Bonny Resume ( Proc)
This document contains a curriculum vitae and summary of qualifications for Bonny Sam Oommen. It includes personal details, contact information, languages spoken, objective, work experience from 2006-2014 in procurement and contracts roles for various companies in Abu Dhabi, academic credentials, current roles and responsibilities, skills gained, strengths, sample projects and activities handled as a procurement and contracts engineer. The CV provides concise information on the professional's background and qualifications in a single document for employment purposes.
Reinvent your sports and leisure building
This webinar discusses the design of sports, leisure and hospitality buildings for schools, sports clubs and private members clubs. I looked at innovation, futureproofing of your building, storytelling, using architectural design to help you develop a strong brand, intangible assets, and how to design a tech enabled smart asset
ACH 231 Lecture 06 (Project Delivery)
The document discusses various project delivery methods and factors that influence their selection. It describes design-bid-build, design-build, fast track, and construction management at-risk and advisor methods. Key determinants of which method to choose include the owner's sophistication, project size and complexity, schedule vs. budget priorities, and bidding climate. Each method has advantages and disadvantages regarding costs, schedules, risk allocation, and relationships between parties.
ACH 231 Lecture 06 (Project Delivery)
The document discusses various project delivery methods and factors that influence their selection. It describes design-bid-build, design-build, fast-track construction, and construction management at-risk and as an advisor. Key determinants of delivery method include owner sophistication, project size/complexity, schedule vs. budget priorities, and bidding climate. Each method has advantages and disadvantages related to communication, cost control, risk allocation, and owner involvement.
LEED Green Associate Study Session #1
This is a summed up version of our first of four LEED Green Associate Training Sessions. The LEED Credentialing Study Sessions are a service that our club, Sustainable Build and Design has offered over the last two years, preparing over 30 LEED APs from BYU, industry, and nearby universities.
Large renovations and what you need to know 2010
This document provides an overview of what homeowners need to know when planning large renovations. It discusses the importance of planning goals and budgets, working with designers and contractors, obtaining necessary permits, dealing with construction impacts, and potential grants and rebates. The contractor, Wo-Built, specializes in innovative and green design/build renovations and aims to educate the public about best practices.
PASBA 2010 presentation
This deck was presented to the Pennsylvania School Boards Association (PSBA) in 2010. It addressed some commonly overlooked critical items in the planning and execution of construction projects which could improve the overall performance of the project and reduce the risk of disputes and claims.
Collaboration Efforts with LED Specifications - Reducing Confusion During Co...
In this presentation we will investigate the specification of LED luminaries and ways to communicate design intent through initial concern to Construction Administration. We will cover how much information is necessary in specs and drawings to facilitate an accurate bids and installation, reduce RFI's and maintain design integrity. We will also cover areas of concern where coordination is paramount to a successful project.
Presented by:
avatar for Jana Owens
Jana Owens, Electrical Engineer, Henderson Engineers & rienne Willcock, Lighting Designer, Illuminart
ABDUL HAKEEM_PROJECT ENGINEER_RESUME
1) Abdul Hakeem has over 7 years of experience as a Project Engineer working on engineering projects in Qatar and India.
2) His responsibilities include coordinating engineering work, reviewing deliverables, organizing meetings, cost estimation, and ensuring projects are completed safely and on schedule.
3) He has successfully led projects for companies such as Chiyoda Almana Engineering, Qatar Fuel Additives Company, Qatar Chemicals, and SBQ Projects, spanning various stages from concept to detailed design.
IPD Prime Time 0210 V1
The document discusses lessons learned from case studies on integrated project delivery (IPD). It summarizes that IPD works best with early collaboration among participants, shared risks and rewards, and jointly developed goals. However, it requires owners to be engaged and teams to change behaviors. While it reduces risks and costs, IPD may not benefit smaller, simpler projects due to upfront work. When done successfully, IPD fosters mutual respect and satisfaction among equal project partners.
DPS Hi End Manufacturing Brochure
D/P/S is an architecture, interiors, planning and engineering firm with offices in New Mexico, Nevada and Texas. They provide services for public and private clients on projects ranging from housing to laboratories. The firm has a diverse staff of licensed professionals and uses the latest technology to meet client needs. D/P/S focuses on creating functional, beautiful and stimulating buildings that are user-driven, responsive to technology and meet high standards of design and compliance. They take a collaborative approach and work with clients throughout the entire design and construction process.
Bridging Gt Apr09
The document discusses various project delivery methods and their advantages and disadvantages. It argues that the bridging method reduces costs, risks, and disputes compared to traditional design-bid-build. The bridging method brings in a contractor early to provide cost estimates and guarantees, while maintaining the owner's control through an owner's design consultant who oversees the design process. Several recently completed projects using the bridging method are listed.
Leed green associate i. synergistic opportunities and leed application proces...
The document contains a sample exam for the LEED Green Associate exam. It includes 10 multiple choice questions about LEED requirements, policies, and processes. Key points covered in the questions include:
- Prerequisites are mandatory for LEED certification while credits are optional.
- Closed systems aim to have no waste by reusing materials, while open systems release materials outside the system.
- The primary goal of the USGBC is to drive market transformation in the building industry through continuous improvement of the LEED rating system.
- Only organizations approved by the USGBC marketing department can use the USGBC logo.
Ipd Convention 2009 Lessons Learned Presentation Final
This document summarizes a presentation on lessons learned from applied Integrated Project Delivery (IPD). The presentation aims to identify, explore, and understand IPD through real project case studies. It discusses the value of IPD processes and how traditional design/construction can be transformed. It also evaluates technological tools that support collaboration within design teams and across project stakeholders. Key takeaways include assessing the benefits of collaboration and continuous budget confirmation through an open book process. Contracts should encourage collaboration through multi-party agreements and shared risk/reward arrangements.
CCDC-Boise-Parking-Structure-Design-Guidelines_2016-Final-Draft-08-04-2016.pdf
This document provides guidelines for parking structure design in downtown Boise. It discusses project delivery methods, sustainable design and accreditation, site requirements and constraints, concept design considerations, circulation and ramping options, one-way vs two-way traffic flows, access design, parking layouts and dimensions, pedestrian requirements, lighting, signage, drainage, and other structural and operational factors. The goal is to produce functional, well-designed, and user-friendly parking structures that meet the needs of different user types and become valued infrastructure for downtown.
How to become leed certified - Get Brief Information
Green building marketplace is an emerging sector today. Suddenly it has started to receive attention from everywhere. Every new and existing organization need to be a LEED certified. Why so? Why has it become so important today to have a LEED certification? Let's take a look at what LEED certification is all about?
ACE Team 2 - WK6 - IPD Presentation
ACE is a mentoring program designed to bring together Chicago's best architecture, engineering, and construction companies to mentor high school teens. The students learn about the building process through weekly activities organized by the mentors.
KB CV
Ken Bird has over 15 years of experience as an electrical designer, estimator, and manager. He currently works as a Senior Estimator and Design Manager at Bloom & Wake Electrical, where he leads a team of estimators on projects ranging from small to very large. Previously, he has held roles as an electrical designer, estimator, and manager on a range of projects in various industries.
Sustain sc 2012 g tech it-logistic presentation
Sustain SC Presentation by Douglas Rackley, AIA, LEED AP BD+C about Greenville Technical College's first LEED Certified new building on its main campus.
Similar to Leed™ At The Jobsite (20)
Collaboration Efforts with LED Specifications - Reducing Confusion During Co...
Collaboration Efforts with LED Specifications - Reducing Confusion During Co...
Leed green associate i. synergistic opportunities and leed application proces...
Leed green associate i. synergistic opportunities and leed application proces...
Ipd Convention 2009 Lessons Learned Presentation Final
Ipd Convention 2009 Lessons Learned Presentation Final
CCDC-Boise-Parking-Structure-Design-Guidelines_2016-Final-Draft-08-04-2016.pdf
CCDC-Boise-Parking-Structure-Design-Guidelines_2016-Final-Draft-08-04-2016.pdf
How to become leed certified - Get Brief Information
How to become leed certified - Get Brief Information
Leed™ At The Jobsite
- 1. LEED ™ at the Jobsite How to Stay Ahead of the Curve
- 11. LESS IS NOT MORE PHOTO’s to Document Progress / Compliance
- 12. Keep On-Going Documentation Co-mingled Construction Waste Management Log
- 16. Submittal Exhibits for Subs Low Emitting Information Sheet Low Emitting Requirements EQ 4 Materials Information Sheet MR 3-7 IAQ Flush-out Plan IAQ Management Plan EQ3 CWM Recycling Requirements CWM Plan MR2 No Smoking Policy LEED Scorecard Subcontractor Letter General C.L.I. LEED Tool Credit/Prereq Subcontractor Submittal Exhibit Contents [Contractor] [Project Name] C.L.I. Group, LLC - LEED NC 2.2 PM