The document provides an overview of the Catalyst 2900 series of Ethernet switches, including:
- The switches provide autosensing 10/100 ports that can be used to connect desktops, servers, hubs and other switches.
- The series includes models with 8 to 24 ports, and one model has two 100BaseFX fiber optic ports.
- Key features include autonegotiation, full-duplex support, MAC address table size, spanning tree protocol, and management options.
There are four main switch mode driver topologies used for LED systems: buck, boost, buck-boost, and flyback. Switch mode drivers are more efficient than discrete component or linear drivers. The presentation discusses the operation and advantages of each topology, including examples of driver ICs in each configuration. SEPIC configuration can regulate output voltage even when input voltage is higher or lower than output. Flyback topology allows for single or multiple outputs and is the most versatile.
This document provides instructions for configuring a network topology in Packet Tracer using 3 routers and 3 switches. It describes connecting the routers and switches with cables and configuring the IP addresses and default gateways for 6 PCs connected to the routers. It also includes directions for connecting the routers together with fiber cables and configuring RIP routing between the routers to establish communication between all devices on the 3 subnetworks.
Electrical wiring is used to carry current and power buildings and structures. There are different types of wiring for domestic, commercial, and industrial use. The choice of wiring depends on factors like durability, safety, appearance, cost, accessibility, and maintenance costs. Common types of wiring include cleat wiring, CTS/batten wiring, metal sheathed wiring, casing and capping, and conduit wiring. Each type has advantages and disadvantages for use depending on the situation. The document also discusses wire specifications and switch types.
El documento describe los contenidos de un curso sobre JDBC y URM. Explica que JDBC se utiliza para el acceso a bases de datos y URM para mapeadores de objetos relacionales. Detalla los conceptos clave de JDBC como drivers, conexión a la base de datos mediante DriverManager, ejecución de sentencias SQL y uso de ResultSet.
El documento describe los contenidos de un curso sobre JDBC y URM. Incluye dos bloques: JDBC para el acceso a bases de datos, y URM para mapeadores de objetos relacionales. Detalla los conceptos clave de JDBC como drivers, operaciones con JDBC, y ejemplos de código para conectarse a una base de datos, enviar consultas y cerrar la conexión. También cubre procedimientos almacenados, transacciones y otras funcionalidades avanzadas de JDBC.
El documento describe conceptos clave de seguridad en aplicaciones Java como criptografía, PKI, control de acceso, SSL y seguridad web. Explica la evolución del modelo de seguridad de Java desde JDK 1.1 hasta la introducción de ficheros de políticas de seguridad y JAAS, y cómo estos definen los permisos de acceso. También cubre temas como la implementación y localización por defecto de los ficheros de políticas de seguridad.
Este documento describe la administración de claves y certificados en aplicaciones Java. Explica las herramientas keytool y JarSigner para gestionar claves y firmar archivos JAR. También describe la infraestructura de clases clave KeyStore para la gestión programática de almacenes de claves.
There are four main switch mode driver topologies used for LED systems: buck, boost, buck-boost, and flyback. Switch mode drivers are more efficient than discrete component or linear drivers. The presentation discusses the operation and advantages of each topology, including examples of driver ICs in each configuration. SEPIC configuration can regulate output voltage even when input voltage is higher or lower than output. Flyback topology allows for single or multiple outputs and is the most versatile.
This document provides instructions for configuring a network topology in Packet Tracer using 3 routers and 3 switches. It describes connecting the routers and switches with cables and configuring the IP addresses and default gateways for 6 PCs connected to the routers. It also includes directions for connecting the routers together with fiber cables and configuring RIP routing between the routers to establish communication between all devices on the 3 subnetworks.
Electrical wiring is used to carry current and power buildings and structures. There are different types of wiring for domestic, commercial, and industrial use. The choice of wiring depends on factors like durability, safety, appearance, cost, accessibility, and maintenance costs. Common types of wiring include cleat wiring, CTS/batten wiring, metal sheathed wiring, casing and capping, and conduit wiring. Each type has advantages and disadvantages for use depending on the situation. The document also discusses wire specifications and switch types.
El documento describe los contenidos de un curso sobre JDBC y URM. Explica que JDBC se utiliza para el acceso a bases de datos y URM para mapeadores de objetos relacionales. Detalla los conceptos clave de JDBC como drivers, conexión a la base de datos mediante DriverManager, ejecución de sentencias SQL y uso de ResultSet.
El documento describe los contenidos de un curso sobre JDBC y URM. Incluye dos bloques: JDBC para el acceso a bases de datos, y URM para mapeadores de objetos relacionales. Detalla los conceptos clave de JDBC como drivers, operaciones con JDBC, y ejemplos de código para conectarse a una base de datos, enviar consultas y cerrar la conexión. También cubre procedimientos almacenados, transacciones y otras funcionalidades avanzadas de JDBC.
El documento describe conceptos clave de seguridad en aplicaciones Java como criptografía, PKI, control de acceso, SSL y seguridad web. Explica la evolución del modelo de seguridad de Java desde JDK 1.1 hasta la introducción de ficheros de políticas de seguridad y JAAS, y cómo estos definen los permisos de acceso. También cubre temas como la implementación y localización por defecto de los ficheros de políticas de seguridad.
Este documento describe la administración de claves y certificados en aplicaciones Java. Explica las herramientas keytool y JarSigner para gestionar claves y firmar archivos JAR. También describe la infraestructura de clases clave KeyStore para la gestión programática de almacenes de claves.
Este documento describe los conceptos básicos de la criptografía en aplicaciones Java, incluyendo certificados digitales, autoridades certificadoras, el estándar X.509 para certificados y sus extensiones. Explica el formato de los certificados X.509, las funciones de las autoridades certificadoras y algunos ejemplos como FNMT.
Este documento describe la criptografía en aplicaciones Java. Explica el cálculo de huellas digitales usando la clase MessageDigest y los algoritmos hash. También cubre firmas digitales mediante el uso de claves públicas y privadas, describiendo las clases Signature, Mac, SignedObject y excepciones como SignatureException.
Este documento describe la criptografía en aplicaciones Java. Explica los conceptos clave de la arquitectura criptográfica de Java (JCA) y la extensión criptográfica de Java (JCE), incluidos los proveedores, clases engine, claves criptográficas, generación de claves y servicios criptográficos. También cubre temas como la encriptación, firma digital y seguridad en aplicaciones web.
Este documento describe la criptografía en aplicaciones Java. Explica conceptos clave como la seguridad, la evolución del modelo de seguridad de Java, y las características de seguridad en J2EE. También define la criptografía y los sistemas criptográficos simétricos y asimétricos, así como la confidencialidad y la integridad.
Este documento establece las medidas de seguridad que deben aplicarse a los ficheros automatizados que contengan datos personales de acuerdo con tres niveles: básico, medio y alto. Define conceptos clave como sistema de información, usuario, recursos, accesos autorizados, e incidencia. Determina que todos los ficheros deben cumplir como mínimo el nivel básico y especifica cuales deben cumplir nivel medio u alto dependiendo del tipo de datos. Describe las medidas de seguridad de nivel básico como la elaboración de un document
Este documento provee una guía completa para la instalación y uso de Linux. Explica las diferentes distribuciones disponibles como Slackware y Red Hat, el proceso de instalación, y cómo administrar un sistema Linux incluyendo la configuración de teclado, particiones, montaje automático, cuotas de disco y swap. El documento contiene información detallada sobre cada paso requerido para configurar y usar exitosamente un sistema operativo Linux.
Este documento presenta una introducción al libro "El nucleo Linux" que describe los principios y mecanismos del núcleo de Linux. Explica que Linux comenzó como un proyecto personal de Linus Torvalds para crear su propio sistema operativo, y desde entonces ha crecido gracias a las contribuciones de la comunidad. También resume brevemente la historia y orígenes de Unix, y cómo Linux se basa en los estándares POSIX pero no contiene código de Unix.
This document provides an overview and summary of OSPF commands for the Matrix X Router. It describes the global OSPF command "router ospf" which is used to enter OSPF Router Configuration mode. It then lists and provides brief descriptions of various global OSPF commands including "advertise-subnet", "authentication", "compatible rfc1583", "dead-interval", and others. Tables are included that provide page references for additional command details.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) CurriculumMJDuyan
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Este documento describe los conceptos básicos de la criptografía en aplicaciones Java, incluyendo certificados digitales, autoridades certificadoras, el estándar X.509 para certificados y sus extensiones. Explica el formato de los certificados X.509, las funciones de las autoridades certificadoras y algunos ejemplos como FNMT.
Este documento describe la criptografía en aplicaciones Java. Explica el cálculo de huellas digitales usando la clase MessageDigest y los algoritmos hash. También cubre firmas digitales mediante el uso de claves públicas y privadas, describiendo las clases Signature, Mac, SignedObject y excepciones como SignatureException.
Este documento describe la criptografía en aplicaciones Java. Explica los conceptos clave de la arquitectura criptográfica de Java (JCA) y la extensión criptográfica de Java (JCE), incluidos los proveedores, clases engine, claves criptográficas, generación de claves y servicios criptográficos. También cubre temas como la encriptación, firma digital y seguridad en aplicaciones web.
Este documento describe la criptografía en aplicaciones Java. Explica conceptos clave como la seguridad, la evolución del modelo de seguridad de Java, y las características de seguridad en J2EE. También define la criptografía y los sistemas criptográficos simétricos y asimétricos, así como la confidencialidad y la integridad.
Este documento establece las medidas de seguridad que deben aplicarse a los ficheros automatizados que contengan datos personales de acuerdo con tres niveles: básico, medio y alto. Define conceptos clave como sistema de información, usuario, recursos, accesos autorizados, e incidencia. Determina que todos los ficheros deben cumplir como mínimo el nivel básico y especifica cuales deben cumplir nivel medio u alto dependiendo del tipo de datos. Describe las medidas de seguridad de nivel básico como la elaboración de un document
Este documento provee una guía completa para la instalación y uso de Linux. Explica las diferentes distribuciones disponibles como Slackware y Red Hat, el proceso de instalación, y cómo administrar un sistema Linux incluyendo la configuración de teclado, particiones, montaje automático, cuotas de disco y swap. El documento contiene información detallada sobre cada paso requerido para configurar y usar exitosamente un sistema operativo Linux.
Este documento presenta una introducción al libro "El nucleo Linux" que describe los principios y mecanismos del núcleo de Linux. Explica que Linux comenzó como un proyecto personal de Linus Torvalds para crear su propio sistema operativo, y desde entonces ha crecido gracias a las contribuciones de la comunidad. También resume brevemente la historia y orígenes de Unix, y cómo Linux se basa en los estándares POSIX pero no contiene código de Unix.
This document provides an overview and summary of OSPF commands for the Matrix X Router. It describes the global OSPF command "router ospf" which is used to enter OSPF Router Configuration mode. It then lists and provides brief descriptions of various global OSPF commands including "advertise-subnet", "authentication", "compatible rfc1583", "dead-interval", and others. Tables are included that provide page references for additional command details.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) CurriculumMJDuyan
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...TechSoup
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Led switch
1. C H A PT E R 1
Introduction
The Catalyst 2900 series XL switches are workgroup Ethernet switches that supply
autosensing 10BaseT or 100BaseT connections on all ports. These switches–also referred
to as Catalyst 2900 switches–can be deployed as backbone switches aggregating 100BaseT
traffic from other switches and hubs or in mixed configurations connecting hubs, switches,
servers, and desktops.
This chapter is a functional overview of the Catalyst 2900 series. The following topics
briefly describe the components and features that are shared by all switches in the series:
• Summary of key features
• Physical components on the front and rear panels of each switch
• Software and management options for the switches
• Examples of Catalyst 2900 series switches in different network topologies
Summary of Key Features
The Catalyst 2900 switches are members of an extended network system of stackable,
modular LAN and WAN products that increase LAN performance, connect remote offices
and users, and provide secure access.
Figure 1-1 shows the four available versions of the Catalyst 2900 series XL switches, and
Table 1-1 lists their key features.
Introduction 1-1
3. Summary of Key Features
Table 1-1 Summary of Key Features
Feature Description
Performance and Configuration • Autosensing transmission on 10/100 ports
• Autonegotiation of half- and full-duplex operation on 10/100 ports
• Full-duplex operation on 100BaseFX ports
• Two high-speed expansion slots supporting 10BaseT/100BaseTX,
100BaseFX and future gigabit, asynchronous transfer mode (ATM) and
Inter-Switch Link (ISL) modules (Catalyst 2916M XL only)
• Fast EtherChannel support for connections of up to 800 Mbps between
switches and servers
• Support for 2048 MAC addresses
• IEEE 802.1d Spanning-Tree Protocol support
• 4 Mb shared-memory architecture
• Cisco Group Management Protocol (CGMP) to limit the flooding of
multicast traffic to predefined ports
• Port security to prevent unauthorized access to the network
• Broadcast storm control to prevent performance degradation from broadcast
storms
• Embedded RMON (four groups)
Management • Embedded World Wide Web interface for most management tasks
• Cisco IOS command-line interface (CLI) via the console port or Telnet
• CiscoView device-management application
Redundancy • Connection for optional Cisco 600W AC redundant power system (RPS) as a
backup
Introduction 1-3
4. Front Panel Description
Front Panel Description
This section describes the switch 10/100 and 100BaseFX ports, expansion slots and their
associated modules, and the LEDs. All Ethernet ports and all LEDs are on the switch front
panel.
10/100 Ports
Catalyst 2900 10/100 ports are internally switched to all other switch ports and use RJ-45
connectors and Category 5 cabling. They can operate at either 10 Mbps or 100 Mbps in full
or half duplex. For autonegotiation with other devices, the ports are
IEEE 802.3u-compliant.
When connected to another device, a port senses the speed and duplex settings of the
attached device and advertises its own capabilities. If the connected device also supports
autonegotiation, the Catalyst 2900 port negotiates the best connection it can and configures
itself accordingly. Ports can also be explicitly set to operate in any combination of half
duplex, full duplex, 10 Mbps, or 100 Mbps. In all cases, the attached device must be within
100 meters of the switch.
100BaseFX Ports
The Catalyst 2924C XL switch (see Figure 1-2) has two 100BaseFX ports on the front
panel. These ports use 10/125- or 62.5/125-micron multimode fiber-optic cabling. In the
default full-duplex mode, these ports can connect to other 100BaseFX devices over
distances of up to 2 kilometers. In half-duplex mode, the ports support connections to
devices up to 412 meters from the switch.
100BaseFX ports default to full-duplex operation and do not autonegotiate.
1-4 Catalyst 2900 Series XL Installation and Configuration Guide
5. High-Speed Expansion Slots
Figure 1-2 Catalyst 2924C XL 100BaseFX Ports
H11771
10BaseT/100BaseTX SERIES
RPS
1x 2x 3x 4x 100BaseFX
5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x 16x 17x 18x 19x 20x 21x 22x 23 24
MODE
10/100 ports 100BaseFX ports
High-Speed Expansion Slots
The Catalyst 2916M XL switch (see Figure 1-3) has two high-speed expansion slots for the
Catalyst 2916M XL hot-swappable modules. These modules provide a variety of
possibilities for connecting backbones, servers, and other high-performance devices. Each
module port is internally switched to all other Catalyst 2916M XL ports.
The Catalyst 2916M XL modules automatically configure themselves when you insert
them in an expansion slot and tighten the thumb screws. The switch does not need to be
reset, and a power-on self-test (POST) verifies that the module is working properly before
it starts forwarding packets.
Introduction 1-5
6. LEDs
Figure 1-3 Catalyst 2916M XL
Expansion slots
SERIES
H10928
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x 16x
MODE
Autosensing 10/100 ports
LEDs
Catalyst 2900 LEDs are indicators of switch activity and performance. Figure 1-4 and
Figure 1-5 show the location of the LEDs and the Mode button. You can use the Mode
button to select one of the port mode LEDs.
The switch LEDs are also displayed on the image of the switch available through the
web-based Switch Manager. All of the LEDs described in this section, with the exception
of the utilization meter (UTL), are visible on the Basic System Configuration page of
Switch Manager. See the “Using Switch Manager” section in the “Web-Based
Management” chapter for more information.
1-6 Catalyst 2900 Series XL Installation and Configuration Guide
7. LEDs
Figure 1-4 Catalyst 2908 XL, 2924 XL, and 2924C XL LEDs
Port status LEDs
System LED RPS
1x 2x 3x
Port mode LED
H10330
MODE
Mode Redundant power
button system LED
Figure 1-5 Catalyst 2916M XL LEDs
Port status LEDs
System LED
Redundant power
system LED
Expansion slot
status LEDs
Port mode LED
1x 2x 3x 4x
Mode button
H10988
MODE
Introduction 1-7
8. LEDs
System LED
The system LED indicates whether the system is receiving power and functioning properly.
Table 1-2 lists the LED colors and their meanings.
Table 1-2 System LED
Color System Status
Off System is not powered up.
Green System is operating normally.
Amber System is receiving power but is not functioning properly.
RPS LED
The redundant power system (RPS) LED shows the RPS status. Table 1-3 lists the LED
colors and their meanings.
Table 1-3 RPS LED
Color RPS Status
Off RPS is off or is not installed.
Green RPS is operational.
Flashing green The RPS and the switch AC power supply are both powered up. If the
switch power supply fails, the switch powers down and restarts after
15 seconds using power from the RPS. The switch goes through its normal
boot sequence when it restarts.
Amber RPS is connected but not functioning properly. One of the power supplies
in the RPS could be powered down or a fan on the RPS could have failed.
1-8 Catalyst 2900 Series XL Installation and Configuration Guide
9. Port Mode and Port Status LEDs
Port Mode and Port Status LEDs
The port mode LED indicates the mode you selected using the Mode button. There are four
possible modes:
STAT The port status. This is the default mode.
UTL The current bandwidth in use by the switch.
FDUP The port duplex mode: full duplex or half duplex.
100 The port operating speed: 10 Mbps or 100 Mbps.
See Table 1-4 for a description of the LED colors and their meanings for the different
modes.
Changing the Port Mode
To change the port mode, press the Mode button (see Figure 1-6) to highlight in sequence
each of the possibilities. Release the button to enable the lit function.
Figure 1-6 Changing the Port Mode
RPS
1x 2x 3x
H10326
MODE
Introduction 1-9
10. LEDs
Table 1-4 Port Status LEDs by Mode
Port Mode Color Meaning
STAT (port status) Off No link.
Solid green Link present.
Flashing green Activity; port is transmitting or receiving data.
Alternating Link fault. Error frames can affect connectivity, and errors such as excessive
green-amber collisions, CRC errors, and alignment and jabber errors are monitored for a
link-fault indication.
Solid amber Port is not forwarding. Port was disabled by management or an address
violation or blocked by Spanning-Tree Protocol.
UTL (utilization) Green If all port status LEDs are green, the switch is using 50% or more of its total
bandwidth capacity.
If the right-most LED is off, the switch is using less than 50% of its total
bandwidth. If the LED to the left of the right-most LED is off, the switch is
using less than 25% of its total capacity. If the next LED to the left is off, the
switch is using 12.5% of its total bandwidth.
Each subsequent LED to the left that is turned off indicates a further reduction
of 50% in the amount of switch bandwidth in use.
FDUP (full duplex) Off Port is operating in half duplex.
Green Port is operating in full duplex.
100 (speed) Off Port is operating at 10 Mbps.
Green Port is operating at 100 Mbps.
1-10 Catalyst 2900 Series XL Installation and Configuration Guide
11. Expansion Slot LEDs
Expansion Slot LEDs
The expansion slot LEDs indicate the status of installed modules. The LEDs are numbered
1 (left slot) and 2 (right slot). Table 1-5 lists the LED colors and their meanings.
Table 1-5 Expansion Slot LEDs
Color Expansion Slot Status
Off No module is installed.
Green Module is operating normally.
Amber Module failed power-on self-test and should be replaced.
Rear Panel Description
The rear panels of the Catalyst 2900 switches (see Figure 1-7, Figure 1-8, and Figure 1-9)
contain an AC power receptacle, a redundant power system (RPS) receptacle, an RJ-45
console port, and fans.
Power Receptacles
You can provide power to the switch either by using the internal power supply or by
connecting the Cisco RPS to the RPS receptacle on the switch. Only one power source can
be supplying power to the switch at a time.
If you want to use the internal power supply, an autoranging unit supporting input voltages
between 100 and 240 VAC, use the supplied AC power cord to connect the AC power
receptacle to an AC power outlet.
If you want to use the RPS, the switch AC power cord must not be plugged in. See the Cisco
RPS documentation for detailed information on connecting to the RPS.
Warning Attach only the Cisco RPS (model PWR600-AC-RPS) to the RPS receptacle.
Introduction 1-11
12. Rear Panel Description
Figure 1-7 Catalyst 2908 XL Rear Panel
H10345
RATING
DC INPUT 100-120/200-240V ~
CONSOLE 0.7A/0.4A 50-60HZ
DC INPUTS FOR REMOTE
POWER SUPPLY
SPECIFIED IN MANUAL.
+5V @8A, +12V @0.5A
AC power RPS connector
receptacle Fan
Figure 1-8 Catalyst 2924 XL and Catalyst 2924C XL Rear Panel
H11751
RATING
100-127/200-240V~
1.0A/O.5A 50-80HZ
DC INPUTS FOR REMOTE
POWER SUPPLY
SPECIFIED IN MANUAL
+5V @9A, +12V @0.5A
AC power
connector Cisco RPS
connector
1-12 Catalyst 2900 Series XL Installation and Configuration Guide
13. Console Port
Figure 1-9 Catalyst 2916M XL Rear Panel
Fans
H10929
RATING
100-120/200-240V ~
DC INPUTS FOR REMOTE 2.0A/1.0A 50-60HZ
POWER SUPPLY
SPECIFIED IN MANUAL.
+5V @24A, +12V @1.0A
DC INPUT
CONSOLE
RJ-45 console port
Redundant AC power
power system connector
connector
Console Port
You can connect a Catalyst 2900 to a PC or terminal via the console port and the supplied
rollover cable. For the data characteristics of the console port, see the “Connecting a
Terminal or PC to the Console Port” section in the “Installation” chapter.
Introduction 1-13
14. Catalyst 2900 Series XL Management Options
Catalyst 2900 Series XL Management Options
You can use the following techniques to manage Catalyst 2900 series switches:
• Catalyst 2900 series Switch Manager
With JavaScript enabled on either Netscape Communicator 4.0 or Microsoft Internet
Explorer 4.0, you can use the web-based Switch Manager to configure the switch,
monitor a live image of the switch, and display statistics. If you are connected to the
Internet, you can link directly from the switch home page to Cisco Systems for new
software releases and the latest Catalyst 2900 series documentation.
• Cisco IOS command-line interface (CLI) via console or Telnet
You can access the Cisco IOS CLI by connecting a PC or terminal to the console port
on the rear panel or by using Telnet. Instructions for using the CLI are in the “Cisco IOS
Management” chapter.
• CiscoView
The CiscoView device-management application displays an image of the switch. You
can point and click on the image to set configuration parameters and get statistics about
the switch and its performance. CiscoView runs as a stand-alone application or as part
of an SNMP network-management platform.
• SNMP network management platforms
Catalyst 2900 series switches can be managed with an SNMP-compatible management
station running such platforms as HP OpenView and SunNet Manager. The switch
supports a comprehensive set of MIB extensions along with MIB II, the 802.1d bridge
MIB, and four Remote Monitoring (RMON) groups.
1-14 Catalyst 2900 Series XL Installation and Configuration Guide
15. Deployment Strategies
Deployment Strategies
This section describes three examples of how you could deploy the Catalyst 2900 in your
network.
• High-performance client/server workgroup
• Wiring closet aggregator
• Power workgroup
High-Performance Client/Server Workgroup
Figure 1-10 shows a Catalyst 2916M XL connecting workstations, 100BaseTX hubs, and
servers in a topology suited to client/server applications. The links to the 100BaseTX
servers and workstations can be full duplex. A repeater does not support full-duplex
transmission, so the links to the 100BaseTX repeaters are always half duplex.
Introduction 1-15
17. Wiring Closet Aggregator
Wiring Closet Aggregator
Figure 1-11 shows a Catalyst 2916M XL connecting 100BaseTX and 10BaseT devices. In
this topology, the switch is in the middle of the network and can provide connectivity to any
mixture of hubs, switches, and servers.
Figure 1-11 Catalyst 2916M XL in a Wiring Closet
Fast EtherChannel, Catalyst Switched full-duplex
ATM, Gigabit 2924M XL 100BaseTX
Ethernet, or ISL links
Catalyst 5000 switch Switched Server farm
or Cisco 7000 router 100BaseTX
links
Catalyst
1900/2820
FastHub
300 stack Switched full-duplex
10BaseT links
Shared
100BaseTX
links
10BaseT workstations
NM5334
100BaseTX workstations
Introduction 1-17
18. Deployment Strategies
Power Workgroup
Figure 1-12 shows a Catalyst 2924C XL or 2924 XL with a 100BaseFX uplink to a
Catalyst 5000 and 10/100 connections to individual workstations.
Figure 1-12 Catalyst 2924C XL or Catalyst 2924 XL in a Power Workgroup
Configuration
Catalyst 2924 or Catalyst 5000 switch or
Catalyst 2924C XL Cisco 7000 router
Fast EtherChannel
over 100BaseTX or
100BaseFX
H11765
10BaseT and 100BaseTX workstations
1-18 Catalyst 2900 Series XL Installation and Configuration Guide