LabproductTM is an ISO 9001 certified company that manufactures world class testing equipment. It has an in-house R&D center for continuous improvement and development of equipment using latest technologies. LabproductTM offers a wide range of automatic and digital testing equipment for industries such as government, defense, and private sectors. It provides complete testing solutions, equipment, training, and consultancy services to customers worldwide.
מדפסת תלת מימד של חברת 3DSystems, אשר מסוגלת להדפיס במגוון חומרי גלם כגון פלדה,אלומיניום,טיטניום,קרמיקה ועוד.
מדפסות ProX 100, ProX 200, ProX 300 מפיקות מודלים בחוזקים סופיים, עם פני השטח היפים בתעשייה במהירות הגבוהה ביותר.
Esco Weighing and Dispensing Containment Isolators (WDCI)Esco Group
Weighing and Dispensing Containment Isolators (WDCI) are advanced containment systems providing controlled negative pressure environments to maximize personnel protection during weighing and dispensing of potent compounds.
Esco WDCIs provide standard configurable designs able to adapt to various weighing and dispensing quantities and accuracy.
Basic Principles
Turbulent airflow allowing maximum containment with low airflow and therefore improved energy efficiency.
• Low negative pressure to reduce operator fatigue whilst providing maximum containment.
• Stable weighing accuracy as a result of low chamber pressure and flow in conjunction with Anti Vibration platform.
• Contained Pass In / Pass Out systems to allow safe material transfer
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
מדפסת תלת מימד של חברת 3DSystems, אשר מסוגלת להדפיס במגוון חומרי גלם כגון פלדה,אלומיניום,טיטניום,קרמיקה ועוד.
מדפסות ProX 100, ProX 200, ProX 300 מפיקות מודלים בחוזקים סופיים, עם פני השטח היפים בתעשייה במהירות הגבוהה ביותר.
Esco Weighing and Dispensing Containment Isolators (WDCI)Esco Group
Weighing and Dispensing Containment Isolators (WDCI) are advanced containment systems providing controlled negative pressure environments to maximize personnel protection during weighing and dispensing of potent compounds.
Esco WDCIs provide standard configurable designs able to adapt to various weighing and dispensing quantities and accuracy.
Basic Principles
Turbulent airflow allowing maximum containment with low airflow and therefore improved energy efficiency.
• Low negative pressure to reduce operator fatigue whilst providing maximum containment.
• Stable weighing accuracy as a result of low chamber pressure and flow in conjunction with Anti Vibration platform.
• Contained Pass In / Pass Out systems to allow safe material transfer
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Laboratory sieves products for laboratory analysis - VIBROTECHNIKVIBROTECHNIKLLC
The Sieve Shakers are designed for intermittent dry sieving of bulk materials according to particle size.
The Sieve Shaker consists of a vibration drive with a set of sieves installed, a tray, a cover and a device
for fastening the sieves. The type of vibration drive, the number of sieves, and the intermediate rings and trays are selected depending on the order and according to the size of the mesh or the apertures in the perforated plate.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Senior Capstone presentation,
"Slam Freezing Device for Electron Microscopy"
Adviser: Professor Ruberti
Team: Jamison Pezdek, Gabe Marquez, Nector Ritzakas, Nick Hermann, Afjal Wahidi
Brief introduction into some of the changes and updates to both the ISO 6892-1 and ASTM E8/8M tensile testing standards for metals and ambient temperature, importantly strain control.
For more information please visit www.instron.com
Golden laser | Professional pipe fiber laser cutting solutionGolden Laser Metal
Golden laser professional pipe fiber laser cutting machine is suitable for cutting round, square, rectangle, oval and other pipes. Now the machine has been widely applied in steel furniture, fitness equipment, steel structure, pipe processing and other industries.
OPTIMIZATION OF CUTTING PARAMETERS FOR CUTTING FORCE IN TURNING OF AISI 904L...ijiert bestjournal
Austenitic stainless steel is one of the most important engineering materials with wide variety
of applications. Superior resistance to corrosion and compatibility in high temperature and
high vacuum has particularly made it an attractive choice. However, the machinability of
austenitic stainless steel is not very promising owing to lower thermal conductivity, higher
degree of ductility and work harden ability. Chromium, Nickel, Copper and Molybdenum
gives 904L better corrosion resistance properties in sulphuric and phosphoric acid
environment. It has excellent forming and welding characteristics.
The present work is concentrated on dry turning of 904L. In this study the effect of cutting
parameters on cutting force is studied by experimentation. A plan of experiments is done by
Taguchi design of experiments to acquire data. The obtained data is validated by calculating
S/N ratio and plotting a graph.
The Bursting Strength Tester- Digital is the instrument that is mainly used in paper and packaging industries as well as the textile industries for ensuring the best quality of the packaging materials like leather, fabric, paper and corrugated sheets.
Measurement solutions for steel mill industryAMETEK STC
Measurement Solutions for the Steel Mill Industry is providing simple and informative overview of the process and the ideal measurement instrumentation. We cover linear position (LDT), Rotary position, brakes, level measurement, pressure measurement and the mill-duty cable and hose carriers Catrac as well. Read the brochure for inspiration to the optimal solutions in steel mill or similar heavy industry
Laboratory sieves products for laboratory analysis - VIBROTECHNIKVIBROTECHNIKLLC
The Sieve Shakers are designed for intermittent dry sieving of bulk materials according to particle size.
The Sieve Shaker consists of a vibration drive with a set of sieves installed, a tray, a cover and a device
for fastening the sieves. The type of vibration drive, the number of sieves, and the intermediate rings and trays are selected depending on the order and according to the size of the mesh or the apertures in the perforated plate.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Senior Capstone presentation,
"Slam Freezing Device for Electron Microscopy"
Adviser: Professor Ruberti
Team: Jamison Pezdek, Gabe Marquez, Nector Ritzakas, Nick Hermann, Afjal Wahidi
Brief introduction into some of the changes and updates to both the ISO 6892-1 and ASTM E8/8M tensile testing standards for metals and ambient temperature, importantly strain control.
For more information please visit www.instron.com
Golden laser | Professional pipe fiber laser cutting solutionGolden Laser Metal
Golden laser professional pipe fiber laser cutting machine is suitable for cutting round, square, rectangle, oval and other pipes. Now the machine has been widely applied in steel furniture, fitness equipment, steel structure, pipe processing and other industries.
OPTIMIZATION OF CUTTING PARAMETERS FOR CUTTING FORCE IN TURNING OF AISI 904L...ijiert bestjournal
Austenitic stainless steel is one of the most important engineering materials with wide variety
of applications. Superior resistance to corrosion and compatibility in high temperature and
high vacuum has particularly made it an attractive choice. However, the machinability of
austenitic stainless steel is not very promising owing to lower thermal conductivity, higher
degree of ductility and work harden ability. Chromium, Nickel, Copper and Molybdenum
gives 904L better corrosion resistance properties in sulphuric and phosphoric acid
environment. It has excellent forming and welding characteristics.
The present work is concentrated on dry turning of 904L. In this study the effect of cutting
parameters on cutting force is studied by experimentation. A plan of experiments is done by
Taguchi design of experiments to acquire data. The obtained data is validated by calculating
S/N ratio and plotting a graph.
The Bursting Strength Tester- Digital is the instrument that is mainly used in paper and packaging industries as well as the textile industries for ensuring the best quality of the packaging materials like leather, fabric, paper and corrugated sheets.
Measurement solutions for steel mill industryAMETEK STC
Measurement Solutions for the Steel Mill Industry is providing simple and informative overview of the process and the ideal measurement instrumentation. We cover linear position (LDT), Rotary position, brakes, level measurement, pressure measurement and the mill-duty cable and hose carriers Catrac as well. Read the brochure for inspiration to the optimal solutions in steel mill or similar heavy industry
From this PDF you'll know more about Taiyi lser cutting machine,such as the difference compared with other manufacturers' laser cutter,the features,applicable materials ,the advantage of ours,etc.
Published by Bruce liu from Taiyi laser ,Mobile/Wechat/whatsApp:+86 135 3855 4312
Thank you for focus !
Brochure Measurement Solutions for the Steel Mill Industry #3AMETEK STC
The steel industry creates some of the most demanding working environments for instrumentation. This brochure creates an overview of the process and solutions on all sorts of position and level measurement from landing the ore the production steps and the steel finishing. We provide a simple overview with recommendations on instruments such as linear displacement transducer (LDT), Rotary Position Limit switches (RLS), Cable and hose management (Catrac), Industrial Brakes, Level measurement and pressure sensors.
Here you can see all HeatSign Laser Marking Machines include laser etching machine, fiber laser engraver, CO2 laser marking macine, industry laser marker, handheld portable laser engraving systems etc.
Olympus Global - Multiple Products One SourceShaun Jackson
Since 1974 Olympus Global Ltd have developed, implemented and managed long term supply partnerships with many major OEM customers either directly or via first tier suppliers.
Through an established global supply chain we specialise in the following core components;
• Turned & Machined Parts
• Automotive Cold Forgings
• Ford World Series Parts
• Hot Forgings
• Gravity, Investment & Pressure Die Castings
• Pressing & Welded Assemblies
• Spring Steel
• Wire Forms
• Tube Manipulation
• Sheet Metal Fasteners
• Rubber & Plastic Mouldings & Extrusions
ISO9002 was awarded in 1993 and our current BS ISO 9001 2000 Quality Management System was awarded in 2004. Environmental Standard IS0 14001 was awarded in 1999.
Components are supplied with initial samples and certification to PPAP level 3, following approval all production parts are supplied with full batch traceability. In house Coordinate Measuring, Hardness Testing and Automated Optical Sorting equipment ensures quality is maintained to consistently high standards.
We develop, implement and manage all forms of supply method including;
• Discrete Order
• Schedule
• Kanfax
• Direct Line Feed
Where possible we utilise electronic data transfer and can offer consolidated monthly invoices which helps reduce administrative functions for us both. Regular review meetings to discuss forecasts, service levels, quality, NPI and on going drawing issue management are essential and a must for any successful partnership.
Olympus Global -Multiple Products One SourceShaun Jackson
Since 1974 Olympus Global Ltd have developed, implemented and managed long term supply partnerships with many major OEM customers either directly or via first tier suppliers, the likes of Dennis Eagle, JLR, Ford and Volvo for example. Through an established global supply chain we specialise in the following core components;
• Turned & Machined Parts
• Automotive Cold Forgings
• Ford World Series Parts
• Hot Forgings
• Gravity, Investment & Pressure Die Castings
• Pressing & Welded Assemblies
• Spring Steel
• Wire Forms
• Tube Manipulation
• Sheet Metal Fasteners
• Rubber & Plastic Mouldings & Extrusions
ISO9002 was awarded in 1993 and our current BS ISO 9001 2000 Quality Management System was awarded in 2004. Environmental Standard IS0 14001 was awarded in 1999.
Components are supplied with initial samples and certification to PPAP level 3, following approval all production parts are supplied with full batch traceability. In house Coordinate Measuring, Hardness Testing and Automated Optical Sorting equipment ensures quality is maintained to consistently high standards.
We develop, implement and manage all forms of supply method including;
• Discrete Order
• Schedule
• Kanfax
• Direct Line Feed
Where possible we utilise electronic data transfer and can offer consolidated monthly invoices which helps reduce administrative functions for us both. Regular review meetings to discuss forecasts, service levels, quality, NPI and on going drawing issue management are essential and a must for any successful partnership.
Medición de diámetros interiores al momento de rectificado o mecanizado de piezas tipo flecha.
Preciso y automático, retroalimenta a la maquina CNC para ajustar el mecanizado.
Solo por Jenoptik.
AWgage-150 measures sheet resistance in ohms per square or milliohms per square. If specific resistivity is known, the thickness of the deposited film layer can be computed from the sheet resistance. The choice of measurement data is easily get in the software. AWgage-150 can accommodate 150mm (6″) wafers as well as the standard 2″, 3″,4″, 5″ wafers without any hardware change.
Allwin21 AWgage-150 Features:
30 years proven Eddy Sheet Resistance Measurement technologies.
Non-contact Sheet Resistance Measurement technologies.
1mΩ/square to 19,990 Ω/square measurement range capability
Touch Screen Monitor and PC w/ Advanced Allwin21 control software.
Wafer carriage travel programmed with internal encoder step motor , without encoder disk.
Consistent wafer-to-wafer process cycle repeatability.
Small footprint and energy efficiency.
Made in U.S.A.
Specifications:
Test Sights: Single center-point, 5-point, or 9-point.5-9
Highly Conductive or Metal Sheet Resistance:
1 to 1,999 mΩ/square
1 to 1,999 Ω/square
Or
10 to 19,990 Ω/square
Highly Conductive or Metal Film ThicknessMinimum: 100 ÅngströmMaximum: Proportional to resistivity. Maximum for a resistivity of 2.7 mW-cm is 270 kÅ (27 mm
Measurement and metrology products guide - Banbros engineeringBanbros Engineering
Here is the summary of all products that we manufacture and supplies to the different industries. The range of products summarized in this catalog are-
1. One touch inspection system
2. Vision Measurement machines
3. Video projectors
4. Profile projectors
5. Hardness Testers
6. Table top magnifiers
7. Wide Field Microscopes
8. Stereo Microscopes
9. Metallurgical Microscopes
10. Metallurgical sample preparation equipments
11. Abrasive cutoff machines
12. Metallographic polishing machines
13. Hot mounting press
14. Belt grinders
15. Material Testing machines
16. U/V notch cutting machine
17. Environmental Test equipments
18. Humidity Test chamber
19. Salt spray test chamber
20. Steam aging test chambers
Pacorr Melt Flow Index tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index
of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a
jet of a particular length and diameter.
Similar to Testing/Manufacture/Lab product catalogue (20)
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
An introduction to the cryptocurrency investment platform Binance Savings.Any kyc Account
Learn how to use Binance Savings to expand your bitcoin holdings. Discover how to maximize your earnings on one of the most reliable cryptocurrency exchange platforms, as well as how to earn interest on your cryptocurrency holdings and the various savings choices available.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
FIA officials brutally tortured innocent and snatched 200 Bitcoins of worth 4...jamalseoexpert1978
Farman Ayaz Khattak and Ehtesham Matloob are government officials in CTW Counter terrorism wing Islamabad, in Federal Investigation Agency FIA Headquarters. CTW and FIA kidnapped crypto currency owner from Islamabad and snatched 200 Bitcoins those worth of 4 billion rupees in Pakistan currency. There is not Cryptocurrency Regulations in Pakistan & CTW is official dacoit and stealing digital assets from the innocent crypto holders and making fake cases of terrorism to keep them silent.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
2. About Us
Lab Product M Having our own in house R&D Center for con-tinuous
improvement of eqipment due to use Latest Technol-ogy
and worldwide customers requirement. For Chenging
the World Class Technology and latest up to date Standards.
Some of our Equipments using PLC, Scada, VB, and Other
Hardware and software for serve the Better and Latest world
Class Testing Equipments to our Customers. Also we have
our all equipments are (Automatic and Digital Version) as
per National & International Standard Like
ISO, BS, ASTM, BIS, JIS, TAPPI DIN SASO....etc
Development, Special purpose Testing Euipment. We have
complete solution for Various Industries of Testing Equip-ment
Like Govt. Road Transport, DGS & D, Railway,
Defense, Export and Private Industries. We are an ISO 9001
Certified Company.
In House Training Reserch & Development
LabproductTM is the sister concern of FEC group of Testing
Equipments Incorporated in Delhi (India). He have more then
two decade in the expriance of testing and training as per nation-al
& international standards. His sharp business acumen and rich
industry experience has always inspirednus to provied maximum
satisfaction to our clients across the word. Incorporated in the
year 1995, in Delhi (India),we are a leading manufacturer and
supplier of a superior quality range of Metal & Automobile Test-ing.
The offered range of products is precisely manufactured in
adherence to international quality standerds utilizing optimum
quality raw material and sophisticated technology under the su-pervision
of our quality experts. As per the varied requirements
of clients, these products can be availed in various specifica-tions
laid down by our esteemed clients. Our offered products
are widely appreciated in the markit for some of their feaiuers
like robust construction, percision engineered, easy to use, low
maintenance, corrosion resistance, application specific design
and perfect finish.
3. • Rare Gas Purifier is a stand-alone unit for the Purification of Argon or any of the other
• rare gases: helium, neon, xenon and krypton.
• It offers a compact system for delivery of purified gas directly to the point of use
• New improved design of heating chamber separated from the main body to
• maximize heat dissipation , Stainless steel tubes.
• Fail safe Design- Offering long term optimum performance and reliability.
• Automatic thermocouple temperature control system.
• Length x Width x Height : 18” x 10” x 25”
Inverted-Metallurgical-Microscopes
Allows a burn free sample production and ensoure an absolute minimal deformation.•
Robust construction and rigid clamping thus minimizing wheel breakage.•
5 HP/3 HP Motor capacity for 12” and 8” wheels.•
Enclosed Cutting Compartment.•
Built in Coolant Tank ans Pump with Re-circulation. •
Cutting capacity upto 80 - 100 mm Job Table Y feed, Xfeed total•
Abrassive - Cutt - Off - Machine
Argon - Gas - Purifier
Binocular Siedentopf Inclined at 30 degree.•
Diopter adjustment ring on ocular tube•
Working Distance Plan Achromatic 10X/20X, 40X (SL)/80X (SL) Dry•
Co-axial focusing system with large knobs, pre- focuing lever & tension adjustmant ring.•
Mechanical stage is 150 mm X 200 mm.•
The Mechanical stage has low positioned co-axial controls on ball bearing guide ways.•
Hand rests on both sides.•
The reflected light illuminator has 6V-20W halogen lamp, adjustable brightness.•
Trinocular Metallurgical Microscopes
Co-axial focusing system with large knobs, pre-foucing lever & tension adjustment ring Reverse angle quadruple • nosepiece on ball bearing.
Machanical stage is 150 mm X 200 mm. •
The Machanical stage has low positioned co-axial controls on ball beating guide ways.•
Binocular interchangeable with trinocular head for micro- photography / Video projection.•
The reflected light illuminator has 6V-20W halogen lamp, adjustable brightness •
Metallurgical microscope
Designed for preparing samples on site, microscop observe and microscope Photograph•
Equipped with wide field-of-view achromatic objectives •
Camera lens is capable of directly connecting with microscope, auto camera can take photograph on site, • and measurement of light strength automatically.
Consists of :- •
Portable grinder, 2. Electric motor instrument, 3. Portable metalloscope, 4. Microscope photographer 1.
4. Stereo - Zoom - Microscope
• Trinocular Observation head inclined at 450
• Diopter adjustable ring on both ocular tube.
• Interpupillary distance frome 55 mm to 75 mm
• Objectives zoom 0.62X to 5X Twin with magnification ratio of 7:1
• Inclined and transmitted light system with 12V-10W halogen tungsten lamp.
• The system regulated with transformer has intensity control knob.
• Working Distance 115 mm
Metallurgy-Plus
• Can be used in steel plants, metal forging Industry, Oil & Gas Industry, Material Science, Mineralogy
metal and Metal Strength Analysis Cement (Klincker) quality control and where ever metallurgical mi-croscopes
are used.
• It has two main toolbars: 1) Measurment Tool 2) Metallography Tools.
• Measurement tools: It has following measuring tools
• Calibration, Length, Angle, Perimeter, Width, Radius, Area, Color, Counting
• Metallography Tools: It has different parameters. Some of which are as follows
1. Grain Size - ASTM E112, (2) Phase - ASTM E 566 1245, (3) Decarbization - ASTM E 1077, (4) Coating Thickness
- ASTM B 487, (5) Nodularity - ASTMA 247, (6) Porosity - ASTM E 276, (7) Inclusion - ASTM E 454 - E 1245, (6)
Inclusion DIN - Standards 50602
Mouning Press
• Permanent Mounting of metallographic specimen for correct polishing results
• Reliable hydraulic jack with pressure gauge Mould
• Specimen Mounting Press: Manual/Hydraulic Operation 1",1¼", 1½" & 2"
• Mould Heater Mould with Internal Cooling System Digital
Laboratory Press used for the preparation tablet in spectral analysis. Laboratory Press uses boric
acid as a material to create a sample tablet, steel rings, aluminum cups, plastic rings and low-pressure
polyethylene. The unique automatic compression-decompression program slowly gives or removes the pressure.
The main advantage of the press - simple and reliability.
Double Dis Grinding/ Lapping Machine
• Complete metallography polishing set up
• Double disc variable speed, backed up by high torque, noiseless D.C. motors with D.C drives, driving discs
indendently
• Disc dia - 200 mm
• Continuous steeples variable speed upto 1400 r.p.m. with digital R.P.M indicator
• It gives the specimen a scratch free mirror like finish.
• Consists of 20cm balanced polishing disc mounted on a steel stride.
• The spindle is located on heavy-duty ball bearing.
• Easily removable disc
• Speed of disc can be continuously varied from 350 to 1400- 2400 r.p.m.
• Suitable for operation on 220/230 volts single phase A.C. supply.
Single Disc Polishing Machine
5. Portable Electrolytic Polisher/Etcher
• Designed to get single stage polishing/etching on variety of metals.
• Supply Voltage: 230V AC 50 HZ.
• Power Consumption: 280W maximum while operating
• Etching Voltage: 0 - 18V (To be set with sample)
• Etching Current H Range : 0 - 750 milliamps.
• Etching Current L Range : 5 - 30 milliamps.
• Etching Timer : 0 - 90 Sec.
Profile-Projector
• Suitable for inspection checking and measurement of highly components like watch parts, form tools, surgical needles.
• It features a 300mm diameter screen with 10x, 20x and 25x magnification lens
• Equipped with a rotary protractor screen for angular measurement
• Two one – micron micrometer heads and a quartz halogen profile and surface illumination.
• Coated optics gives bright, clear and sharp images.
• Highly Polished and lapped front-coated mirrors provide distortion – less reproduction.
• A precision, hard chrome plated coordinate work stage featuring hard ground ball tracks at one micron least count.
• Photoelectric measuring system widely used in the trade of mechanism, meter, electricity, light industry, college, research institute and measurement-inspecting department.
• Good quality optical system, imaging lens clear and accurate magnification. In the transmission of the illumination
• Profile measurement error is less than 0.08%.
• Measuring accuracy(mm) 3+L/75
• Table Resolution: (X-axis,Y-axis):0.001mm
• Screen size (mm):Ø 312 Used range>Ø 300(with the meter line)
• Magnification: 10X(option) 25X(option) 50X(option) 100X(option)
• Power : 110V/220V(AC), 50/60HZ
Digital-Profile-Projector
Special Furnace with DTC, Thyristor controlled panel avoids temp. over shooting.•
At a time three jominy test can be can be carried out.•
Quick transfer of spcimen to queching fixture with in special tong.•
Quenching fixture designed stricitly as per BS/SAE with specifications like 45_angle of top plate, • quenching distance, jet stopper release just before quenching etc.
Motorised water circulation with storage & test tank.•
Hardness testing fixture for progressive hardness Indentations.•
Jominy End Quench Hardenability Set Up
SLE-YE Series digital CTM is used to test the compressive strength of concrete, stone & related building material such as road, bridge etc including metallic & non-metallic construction parts.The model is capable of data storage & can be interfaced with PC
Compression Testing Machine
6. Color Touch ScreenDigital Rockwell Hardness Tester
Color Touch Screen Digital Brinell Hardness Tester
Equips with Auto Turret, Close loop loading system,key panel and touch screen double input methods, blue tooth transferring technology; Two models with max loading force at 1Kgf(Vicky MHV-1000) and 2Kgf(VickyMHV-2000), meets different kinds of materials measuring requirment. Close loop loading system is to realize auto loading, dwell and unloading, makes better accuracy and easier installation.
Ultrasonic hardness tester is widely used to measure hardness of small forings, cast material, weld inspection, heat affected zone, lon-nitrided stamping dies and molds, forms, presses, thin walled parts, bearings, tooth flanks, etc.
Half automatic hardness tester except loding initial force and change force knob. Operation is very convenient and fast.
Color touch screen, display loading force, indenter type, dwell time, and conversion scale.
Motorized control loading, dwell and unloading, eliminates error by manual operation.
Auto hardness conversion to others scales, no need to check table and improve working efficiency.
Support Multiple languages, English, Turkish, German, etc. Convenient for local customers operation.
Metal shell, nice appearance design
Available to save 500 groups test results.
4” LCD to display hardness result, conversion result, Max, Min, Mean value.
Support blue tooth printer, with RS232 to connect computer for software running.
Can test all kinds of metal which more than 5kg
Vexus SHB-3000D differs from like product is close loop loding system, kye panel touch screen double input methods, blue tooth transferring technology and digital measurement indentation technology. High accuracy close loop loding sensor replace traditional weights loading method, to realize automatic loading, dewell and unloading, makes easier installation and better measurement accuracy.
Color Touch Screen Digital Micro Vickers Hardness Tester
Ultrasonic Hardness Tester
Leed Hardness Tester
Pin-On-Disc Abrasive wear Test
This Test Conforms to As per ASTM G99 standard test method•
Analyzes wear • and friction characteristics of sliding contacts (dry or lubricated conditions)
Pin-On Disc • Tests can be performed on a variety of materials: metals, polymers, composites, ceramics, lubricants, cutting fluids, abrasive slurries, coatings, and heat- related samples
DATA software • package varies and records pin pressure, pin temperature, sliding speed, and lubrication parameters
7.
8. Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll No. 816, New Delhi 110043 (INDIA)
Correspondence Address : Plot No. 35, K-1 Extn., Bank Wali Gali Gurudwara Road, Mohan Garden, Uttam Nager, Delhi-110059
Cell - 9811478874, 9811938703, 9212912990
E-Mail : info@fecproduct.com / inquiry_fecproduct.com
Website : www.fecproduct.com
ISO 9001 Certified