This document summarizes research on using nanoparticles for photothermal therapy on mice with cancer tumors. It includes figures showing the effects of different concentrations of nanoparticles and laser wavelengths on tumor temperature over time. The results show that injecting higher concentrations and doses of nanoparticles into tumors, followed by laser irradiation, led to greater increases in tumor temperature and helped shrink and eliminate tumors over time compared to lower doses.
On 11 May 2016, Karex CEO Goh Miah Kiat explained how Karex, the world's largest condom manufacturer, contributes to sustainability the dialogue on “Fostering Sustainable Procurement: How Procurers Can Change the Global Health Sector” in UN City, Copenhagen.
Provided geopolitical movement doesn’t derail his best laid predictions, Gordon Orr sees a year of slowing economic growth, headaches for multinationals, demographic anxiety, and buyer’s remorse for soccer tycoons.
On 11 May 2016, Karex CEO Goh Miah Kiat explained how Karex, the world's largest condom manufacturer, contributes to sustainability the dialogue on “Fostering Sustainable Procurement: How Procurers Can Change the Global Health Sector” in UN City, Copenhagen.
Provided geopolitical movement doesn’t derail his best laid predictions, Gordon Orr sees a year of slowing economic growth, headaches for multinationals, demographic anxiety, and buyer’s remorse for soccer tycoons.
L’entreprise peut agir sur son image, la perception de ses offres en identifiant les influenceurs dans son secteur d’activité et en suivant leurs avis !
Les influenceurs diffusent des contenus qui peuvent avoir un impact positif ou négatif sur l’image d’une entreprise, d’une offre … Ils utilisent pour cela différents outils, comme les blogs, les forums, les réseaux sociaux … les suivre peut permettre également d’anticiper de nouvelles tendances
Melanoma Image Segmentation using Self Organized Features MapsMunnangi Anirudh
This ppt presents a SOFM (Self Organizing Feature Maps) model addressing the problem of segmentation of Dermoscopic skin cancer images. It proposes a unique way of passing information from the image to the network and shows how to interpret the output of the network. The main aim is to train the network so that it segments novel images correctly.
Basic principles of chemotherapy/ AMAs covers definition, history of AMAs development, principles of AMAs, problems associated with AMAs, failure of therapy with examples.
Les Echosmédias Factory : votre usine à histoiresLes Echosmédias
Découvrez Factory, la cellule Opérations spéciales des Echosmédias, régie publicitaire des Echos.
#1 Une équipe engagée
La Factory est votre usine à histoires, tout comme Andy Warhol avait sa fabrique à chefs-d’oeuvre. Notre équipe, dédiée et experte, s’engage à mettre en scène votre histoire de marque sur-mesure et efficacement.
...Parce ce que votre marque est unique.
#2 Des supports innovants
La Factory vous propose des supports homogènes et ouverts à la créativité, au service d’histoires de marques qui ont du sens.
...Parce que la rigueur de l’expertise n’empêche pas l’originalité.
#3 Une cible influente
Les Decision Makers forment une cible à part, active, décisionnaire et exigeante. En touchant les Decision Makers, vous parlez aux trend-setters, ceux dont l’avis compte.
...Ceux que l’on suit sans se poser de questions.
#4 Des histoires uniques
Nos opérations spéciales ont toutes le même but : attirer l’attention d’une cible influente mais qui n’a pas de temps à perdre. La Factory s’engage à raconter des histoires de marque uniques : pas de solutions toutes faites, pas de copié-collé.
...Pour des histoires impactantes.
Papananou PhD thesis presentantion
Addition of nanosized inorganic materials in a polymeric matrix results to nanohybrids with optimized properties with respect to the initial components. On the other hand, the behavior of polymers when they are restricted in space or when they are close to surfaces can be very different from that in the bulk.
In this work, we modify the crystallinity of nanohybrids composed of poly(ethylene oxide) and two kinds of silica nanoparticles of different sizes in an attempt to bridge the case of severely confined polymers within the galleries of layered silicates with that of Polymer/single-nanoparticle hybrids. The two kinds of nanoparticles vary by an order of magnitude in radius as verified by Dynamic Light Scattering (DLS). Hybrids with different ratio between the two silica nanoparticles were prepared in order to achieve the highest confinement. The good dispersion of the nanoparticles was verified by Scanning Electron Microscopy (SEM), whereas the morphology and crystallization behavior of the hybrids were investigated with X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Polarised Optical Microscopy (POM). Polymer crystallinity in single nanoparticle hybrids decrease with increasing silica content whereas the behaviour in the three component systems is found indeed intermediate between the cases of PEO/Na+-MMT and PEO/SiO2 and can be tuned by varying the ratio of the large vs small nanoparticles.
3 Ways the New Thermo Scientific LC MS Triple Quads Improve Residue AnalysisThermo Fisher Scientific
Learn how the new Thermo Scientific LC-MS triple quadrupole mass spectrometers incorporate unique design features that improve analysis of food matrices for veterinary drug and pesticide residues.
L’entreprise peut agir sur son image, la perception de ses offres en identifiant les influenceurs dans son secteur d’activité et en suivant leurs avis !
Les influenceurs diffusent des contenus qui peuvent avoir un impact positif ou négatif sur l’image d’une entreprise, d’une offre … Ils utilisent pour cela différents outils, comme les blogs, les forums, les réseaux sociaux … les suivre peut permettre également d’anticiper de nouvelles tendances
Melanoma Image Segmentation using Self Organized Features MapsMunnangi Anirudh
This ppt presents a SOFM (Self Organizing Feature Maps) model addressing the problem of segmentation of Dermoscopic skin cancer images. It proposes a unique way of passing information from the image to the network and shows how to interpret the output of the network. The main aim is to train the network so that it segments novel images correctly.
Basic principles of chemotherapy/ AMAs covers definition, history of AMAs development, principles of AMAs, problems associated with AMAs, failure of therapy with examples.
Les Echosmédias Factory : votre usine à histoiresLes Echosmédias
Découvrez Factory, la cellule Opérations spéciales des Echosmédias, régie publicitaire des Echos.
#1 Une équipe engagée
La Factory est votre usine à histoires, tout comme Andy Warhol avait sa fabrique à chefs-d’oeuvre. Notre équipe, dédiée et experte, s’engage à mettre en scène votre histoire de marque sur-mesure et efficacement.
...Parce ce que votre marque est unique.
#2 Des supports innovants
La Factory vous propose des supports homogènes et ouverts à la créativité, au service d’histoires de marques qui ont du sens.
...Parce que la rigueur de l’expertise n’empêche pas l’originalité.
#3 Une cible influente
Les Decision Makers forment une cible à part, active, décisionnaire et exigeante. En touchant les Decision Makers, vous parlez aux trend-setters, ceux dont l’avis compte.
...Ceux que l’on suit sans se poser de questions.
#4 Des histoires uniques
Nos opérations spéciales ont toutes le même but : attirer l’attention d’une cible influente mais qui n’a pas de temps à perdre. La Factory s’engage à raconter des histoires de marque uniques : pas de solutions toutes faites, pas de copié-collé.
...Pour des histoires impactantes.
Papananou PhD thesis presentantion
Addition of nanosized inorganic materials in a polymeric matrix results to nanohybrids with optimized properties with respect to the initial components. On the other hand, the behavior of polymers when they are restricted in space or when they are close to surfaces can be very different from that in the bulk.
In this work, we modify the crystallinity of nanohybrids composed of poly(ethylene oxide) and two kinds of silica nanoparticles of different sizes in an attempt to bridge the case of severely confined polymers within the galleries of layered silicates with that of Polymer/single-nanoparticle hybrids. The two kinds of nanoparticles vary by an order of magnitude in radius as verified by Dynamic Light Scattering (DLS). Hybrids with different ratio between the two silica nanoparticles were prepared in order to achieve the highest confinement. The good dispersion of the nanoparticles was verified by Scanning Electron Microscopy (SEM), whereas the morphology and crystallization behavior of the hybrids were investigated with X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Polarised Optical Microscopy (POM). Polymer crystallinity in single nanoparticle hybrids decrease with increasing silica content whereas the behaviour in the three component systems is found indeed intermediate between the cases of PEO/Na+-MMT and PEO/SiO2 and can be tuned by varying the ratio of the large vs small nanoparticles.
3 Ways the New Thermo Scientific LC MS Triple Quads Improve Residue AnalysisThermo Fisher Scientific
Learn how the new Thermo Scientific LC-MS triple quadrupole mass spectrometers incorporate unique design features that improve analysis of food matrices for veterinary drug and pesticide residues.
Increasing Amorphous Selenium Thickness in Direct Conversion Flat-Panel Image...David Scaduto
Purpose: Contrast-enhanced (CE) breast imaging using iodinated contrast agents requires imaging with x-ray spectra at energies greater than those used in mammography. Optimizing amorphous selenium (a-Se) flat panel imagers (FPI) for this higher energy range may increase lesion conspicuity.
Methods: We compare imaging performance of a conventional FPI with 200 μm a-Se conversion layer to a prototype FPI with 300 μm a-Se layer. Both detectors are evaluated in a Siemens MAMMOMAT Inspiration prototype digital breast tomosynthesis (DBT) system using low-energy (W/Rh 28 kVp) and high-energy (W/Cu 49 kVp) x-ray spectra. Detectability of iodinated lesions in dual-energy images is evaluated using an iodine contrast phantom. Effects of beam obliquity are investigated in projection and reconstructed images using different reconstruction methods. The ideal observer signal-to-noise ratio is used as a figure-of-merit to predict the optimal a-Se thickness for CE lesion detectability without compromising conventional full-field digital mammography (FFDM) and DBT performance.
Results: Increasing a-Se thickness from 200 μm to 300 μm preserves imaging performance at typical mammographic energies (e.g. W/Rh 28 kVp), and improves the detective quantum efficiency (DQE) for high energy (W/Cu 49 kVp) by 30%. While the more penetrating high-energy x-ray photons increase geometric blur due to beam obliquity in the FPI with thicker a-Se layer, the effect on lesion detectability in FBP reconstructions is negligible due to the reconstruction filters employed. Ideal observer SNR for CE objects shows improvements in in-plane detectability with increasing a-Se thicknesses, though small lesion detectability begins to degrade in oblique projections for a-Se thickness above 500 μm.
Conclusion: Increasing a-Se thickness in direct conversion FPI from 200 μm to 300 μm improves lesion detectability in CE breast imaging with virtually no cost to conventional FFDM and DBT.
This work was partially supported by a research grant from Siemens Healthcare.
Tuning the crystallinity of Poly(ethylene oxide) in PEO-SiO2 nanocompositesEleni 'Hellen' Papananou
Addition of nanosized inorganic materials in a polymeric matrix results to nanohybrids with optimized properties with respect to the initial components. On the other hand, the behavior of polymers when they are restricted in space or when they are close to surfaces can be very different from that in the bulk.
In this work, we modify the crystallinity of nanohybrids composed of poly(ethylene oxide) and two kinds of silica nanoparticles of different sizes in an attempt to bridge the case of severely confined polymers within the galleries of layered silicates with that of Polymer/single-nanoparticle hybrids. The two kinds of nanoparticles vary by an order of magnitude in radius as verified by Dynamic Light Scattering (DLS). Hybrids with different ratio between the two silica nanoparticles were prepared in order to achieve the highest confinement. The good dispersion of the nanoparticles was verified by Scanning Electron Microscopy (SEM), whereas the morphology and crystallization behavior of the hybrids were investigated with X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Polarised Optical Microscopy (POM). Polymer crystallinity in single nanoparticle hybrids decrease with increasing silica content whereas the behaviour in the three component systems is found indeed intermediate between the cases of PEO/Na+-MMT and PEO/SiO2 and can be tuned by varying the ratio of the large vs small nanoparticles.
Vibrafoam provides effective protection against vibration and shock. This High-tech polyurethane elastomer can be used as two-dimensional matting for decoupling components, as a blank according to the respective component geometry or as custom-made molding. We offer a wide range of 13 standard materials and also offer the possibility to produce special types in various colours and thicknesses to suit your requirements
Inspired Noise UK Vibrafoam provides effective protection against vibration and shock. This High-tech polyurethane elastomer can be used as two-dimensional matting for decoupling components, as a blank according to the respective component geometry or as custom-made moulding. We offer a wide range of 13 standard materials and also offer the possibility to produce special types in various colours and thicknesses to suit your requirements.
Vibrafoam provides effective protection against vibration and shock. This High-tech polyurethane elastomer can be used as two-dimensional matting for decoupling components, as a blank according to the respective component geometry or as custom-made molding. We offer a wide range of 13 standard materials and also offer the possibility to produce special types in various colours and thicknesses to suit your requirements
7. 30
35
40
45
50
55
60
65
70
0 50 100 150 200 250 300
Temperature(Celcius)
Time (Seconds)
Temperature Vs. Time Of Different O.D.
0 O.D.
12.5 O.D.
25 O.D.
50 O.D.
Power Density = 550
8. 30
35
40
45
50
55
60
65
70
0 50 100 150 200 250 300
Temperature(Celcius)
Time (Seconds)
Temperature of Tumor
50 ul NNP
100 ul NNP
200 ul NNP
Tumor, 200 ul (100 OD),
0 seconds
Tumor, 200 ul (100 OD),
30 seconds
Tumor, 200 ul (100 OD),
1.5 minutes
PD= 400