Krystal Sayers has created hundreds of 3D components and assemblies in AutoCAD 2006 from physical measurements to use in experimental assemblies and submittals. She has also made 2D drawings for electrical contractors to facilitate cable and box installation using backgrounds supplied or recreated in AutoCAD 2010, typically completing assignments within an hour or three depending on the background format. With no prior CAD experience, Krystal learned AutoCAD efficiently and her work quality allowed her employer to reduce CAD operators from three to one in under a year.

1. Krystal Sayers
AutoCAD Portfolio

2. 3D Portfolio
• I used solids editing in AutoCAD 2006 to create my
renderings.
• I completed most of these renderings in less than a
day of work.
• I created them through having the component in
hand and measuring every detail. These were mainly
used in experimental assemblies and for submittal
paperwork.
• I have created hundreds of components and
samples, this is a small sampling of a massive
database I created.

3. Demo Wall for Sales Sample Wall Setup for Customer
to

4. Miscellaneous Components Used in Assemblies and Submittals
to

5. Blown Out Box Assembly for Submittal Switch Made for Sample Assemblies
to

6. 2D Portfolio
• I made these drawings for electrical contractors for ease of
installation of cable and box assemblies in the field.
• Backgrounds were either sent in and used in the form of external
references, or were once in PDF format and I retraced them in order
to build my own useable backgrounds.
• I created these drawings in AutoCAD 2010. When backgrounds
were supplied in CAD format, I typically completed them within an
hour of assignment. When supplied in PDF format, I typically
completed them within 3 hours.
• It is important to note that I did not design the electrical work; the
project coordinator or electrical contractor designed the electrical
by hand. It was my job to present them in a clear, concise manner. I
was also tasked with putting them together in a way that made
computer extraction of material possible.

7. I have made drawings for hotels:

8. Hotels:

9. Businesses:

10. Businesses:

11. Condominiums:

12. Condominiums:

13. Slab drawings for contractors:

14. 2D Portfolio
I also have experience in creating
drawings from scratch using
measurements either a contractor, my
superiors, or myself supplied. Everything
in the following drawings is my
work, start to finish.

15. Emergency escape route:

16. Elevations:

17. Elevation:

18. I started at my current job with no experience
2D Portfoliosoftware like it.
using AutoCAD or any other
My employers were able to cut down my
department from three CAD Operators to one
in less than a year because of my efficiency
and work quality.
In the event that the work presented in this portfolio
doesn’t correlate well with what you are looking for
in a CAD Operator, I am confident that I can either
apply my current knowledge to whatever needs to be
done, or I can learn whatever is necessary quickly
with or without someone to teach me.

19. Thank you for your time
and consideration!
Krystal Sayers
786-619-4678
krystal.sayers@yahoo.com