I am Ph.D. student at Wright State University. My research area is computational mechanics and design optimization. I mainly focused on design optimization for coupled fluid-solid interaction problems with applications to aerospace vehicles.
Joshua B. Hecht has over 5 years of experience in aerospace engineering. He has worked as an Aerospace Engineer III at Paragon Space Development Corporation where he managed production of a humidity control subsystem and led testing and failure analysis. As a graduate research assistant, he developed computer models and a thesis evaluating a self-regulating freezable heat exchanger. Prior to this, he worked as a Satellite Command Controller at the Laboratory for Atmospheric and Space Physics, conducting commanding for five NASA spacecraft.
Asif K.M.R. Kabir is seeking a mechanical engineering position utilizing his experience in modeling and simulation, computational fluid dynamics, finite element analysis, manufacturing processes, and statistical modeling. He has a PhD in Mechanical Engineering from North Carolina A&T State University and research experience assessing hydrokinetic energy resources through computational modeling and statistical analysis. His skills include fluid dynamics simulation software, programming languages, and engineering coursework.
The document discusses Environment Canada's plans to provide safety and security for the 2015 Pan/Parapan Am Games in Toronto through improved weather monitoring and forecasting. It will deploy the Automated Mobile Meteorological Observation System (AMMOS) to detect lake breezes and lake breeze fronts, which can cause sharp temperature drops and wind shifts, and issue more consistent, accurate and location-specific warnings with longer lead times to reduce risks. AMMOS will collect real-time weather data along pre-set routes to help forecasters identify developing weather hazards.
Ms. Ciya Varghese successfully completed a June-July 2018 internship at IIST researching numerical simulations of three-dimensional laminar incompressible flow and heat transfer in lobed-toroidal flow passages. The certificate confirms she analyzed heat transfer enhancement as part of carrying out simulations on fluid flow and heat transfer in twisted helical four lobe channels under the supervision of Associate Professor Deepu.
This document contains a general risk assessment form used by the BBC. It includes sections to outline the production details, hazards identified, likelihood and severity of harm from those hazards in a risk matrix, and spaces for an assessor and authorizer signature. The hazards listed cover health, physical/chemical, and situational risks. It is meant to assess risks for an unnamed production over an unspecified period of time involving a producer, editor, and other team members at an office or location in Whitley Bay.
Dustin Cole Howser is a senior at Vanderbilt University majoring in Mechanical Engineering and Mathematics with a 3.96 GPA. He has worked on several projects including building rockets at the Vanderbilt Aerospace Design Laboratory and analyzing data on crack propagation for aerospace applications as an intern at Vextec Corporation. Dustin has also designed exoskeleton and prosthetic devices at the Biomechanics and Assistive Technologies Laboratory and led maintenance projects as an intern at Domtar Paper Mill. His projects include an Arduino controlled mechanical oscilloscope, a self-blending beverage container, and an accelerometer controlled chromatic bass guitar tuner. He is currently Vice President of the Vanderb
This technical drawing document contains dimensions and specifications for a part called "Pawn A". It includes measurements in millimeters for the part's features and geometry. The document also lists the date it was drawn, the scale, the drawing title, file information, and notes that it was drawn and checked by students at Central Carolina Technical College for their Engineering Graphics Technology program.
Locations of China's 81 existing, constructing and planning coal-to-gas plants recorded in China Natural Gas Map 5, Project Directories and Reports published by ARA Research & Publication.
Joshua B. Hecht has over 5 years of experience in aerospace engineering. He has worked as an Aerospace Engineer III at Paragon Space Development Corporation where he managed production of a humidity control subsystem and led testing and failure analysis. As a graduate research assistant, he developed computer models and a thesis evaluating a self-regulating freezable heat exchanger. Prior to this, he worked as a Satellite Command Controller at the Laboratory for Atmospheric and Space Physics, conducting commanding for five NASA spacecraft.
Asif K.M.R. Kabir is seeking a mechanical engineering position utilizing his experience in modeling and simulation, computational fluid dynamics, finite element analysis, manufacturing processes, and statistical modeling. He has a PhD in Mechanical Engineering from North Carolina A&T State University and research experience assessing hydrokinetic energy resources through computational modeling and statistical analysis. His skills include fluid dynamics simulation software, programming languages, and engineering coursework.
The document discusses Environment Canada's plans to provide safety and security for the 2015 Pan/Parapan Am Games in Toronto through improved weather monitoring and forecasting. It will deploy the Automated Mobile Meteorological Observation System (AMMOS) to detect lake breezes and lake breeze fronts, which can cause sharp temperature drops and wind shifts, and issue more consistent, accurate and location-specific warnings with longer lead times to reduce risks. AMMOS will collect real-time weather data along pre-set routes to help forecasters identify developing weather hazards.
Ms. Ciya Varghese successfully completed a June-July 2018 internship at IIST researching numerical simulations of three-dimensional laminar incompressible flow and heat transfer in lobed-toroidal flow passages. The certificate confirms she analyzed heat transfer enhancement as part of carrying out simulations on fluid flow and heat transfer in twisted helical four lobe channels under the supervision of Associate Professor Deepu.
This document contains a general risk assessment form used by the BBC. It includes sections to outline the production details, hazards identified, likelihood and severity of harm from those hazards in a risk matrix, and spaces for an assessor and authorizer signature. The hazards listed cover health, physical/chemical, and situational risks. It is meant to assess risks for an unnamed production over an unspecified period of time involving a producer, editor, and other team members at an office or location in Whitley Bay.
Dustin Cole Howser is a senior at Vanderbilt University majoring in Mechanical Engineering and Mathematics with a 3.96 GPA. He has worked on several projects including building rockets at the Vanderbilt Aerospace Design Laboratory and analyzing data on crack propagation for aerospace applications as an intern at Vextec Corporation. Dustin has also designed exoskeleton and prosthetic devices at the Biomechanics and Assistive Technologies Laboratory and led maintenance projects as an intern at Domtar Paper Mill. His projects include an Arduino controlled mechanical oscilloscope, a self-blending beverage container, and an accelerometer controlled chromatic bass guitar tuner. He is currently Vice President of the Vanderb
This technical drawing document contains dimensions and specifications for a part called "Pawn A". It includes measurements in millimeters for the part's features and geometry. The document also lists the date it was drawn, the scale, the drawing title, file information, and notes that it was drawn and checked by students at Central Carolina Technical College for their Engineering Graphics Technology program.
Locations of China's 81 existing, constructing and planning coal-to-gas plants recorded in China Natural Gas Map 5, Project Directories and Reports published by ARA Research & Publication.
The document summarizes the requirements for obtaining a PhD from the University of Adelaide. It states that a PhD involves 3-4 years of original research under supervision, which develops the capacity for independent research. Candidates must complete an approved program of study and research, and present a thesis demonstrating significant contributions to their field. The thesis can take various forms, but examiners will evaluate the candidate's knowledge, ability to relate their research to the broader field, independence, and contribution to knowledge.
Dr. Vikram R. Patil received his Ph.D in Chemistry from Bharati Vidyapeeth Deemed University in March 2014. His thesis was titled "Kinetics and Mechanism of Oxidation of Amides." He has over 9 years of teaching experience as a lecturer and assistant professor of chemistry. His areas of expertise include kinetics and mechanisms of oxidation reactions. He has published research papers in international and national journals on topics such as silver and cobalt catalyzed oxidation reactions of amides using bromamine-T.
The document summarizes a company that was founded in 1999 and is a leading provider of Bluetooth audio technology. It provides Bluetooth audio stacks, middleware, and reference designs for mobile phones, audio players and automotive electronics. Major customers include Broadcom, Sony, and Texas Instruments. The company was acquired by SiRF in 2005. It offers various Bluetooth related software and services including protocol stacks, audio middleware, and codec solutions.
Social media can increase teenagers' self-esteem when they share stories of their achievements online. Uploading accomplishments provides validation that may be lacking offline. Sharing successes may help teenagers struggling to make real-world connections find acceptance in the virtual world.
The document outlines commitments from a recruiting firm and recruiters to candidates regarding placement services. The firm pledges to uphold its values of quality, integrity, and teamwork. Recruiters will listen to candidates' needs, obtain permission before sharing resumes, treat candidates with the highest standards, and provide support through the hiring process and after placement. The document also lists expectations of candidates to communicate honestly and timely with recruiters and provide documentation within 24 hours when requested.
Mohamed Ahmed El-Degwhy is seeking a sales position that utilizes his 9 years of experience in the dairy industry. He has held several supervisory and managerial roles at various dairy companies in Egypt, including managing retail staff, coaching employees, analyzing market trends, and ensuring product availability. El-Degwhy has a Bachelor's degree in Commerce from Mansoura University and additional training in sales team management, market analysis, and negotiation skills.
Android ha pasado por varias versiones desde 2008 que han introducido mejoras en la interfaz, funcionalidad y rendimiento. La versión inicial de 2008 ofrecía un sistema operativo móvil gratuito y de código abierto. Versiones posteriores como Eclair en 2009, Gingerbread en 2010 e Ice Cream Sandwich en 2011 agregaron características como soporte para pantallas más grandes, actualizaciones automáticas y compatibilidad multi-dispositivo. Las últimas versiones como Nougat en 2016 y Oreo en 2017 han continuado perfeccionando el diseño y rendimiento de
R.N.Chandra Mouli is seeking a senior managerial position and has over 25 years of experience in retail operations, sales, marketing, and business development. He has expertise in sales target achievement, expense optimization, profit maximization, and people management. Currently he is working as Head of Marketing and Sales at IDEA Clinics in Hyderabad, leading a team and responsible for sales, operations, recruitment, and business growth. His career includes several managerial roles with increasing responsibility in healthcare companies based in Hyderabad.
Op 1 september 2015 heeft Werkplaats Rotterdam Zuid (WRZ) de deuren geopend. Deze Social Impact Bond heeft ten doel om de
komende vijf jaar 750 mensen met een grote afstand tot de arbeidsmarkt in Rotterdam Zuid aan een baan te helpen.
Een Social Impact Bond (SIB) is een financieringsinstrument waarbij private investeerders investeren in een innovatieve
maatschappelijke interventie. De investeerders krijgen uitbetaald door een overheid (gemeente, rijk) op basis van de besparing die
de Social Impact Bond realiseert.
De aanpak van WRZ is een innovatie binnen het sociaal/maatschappelijke domein. Dit project wordt privaat gefinancierd door
FondsDBL. De gemeente Rotterdam keert prestatiebeloningen uit naar gelang de prestaties van WRZ. De prestatiebelongingen worden
betaald uit de besparing die wordt gerealiseerd doordat mensen geen bijstandsuitkering meer nodig hebben. Om over 5 jaar te kunnen
onderbouwen of deze innovatieve aanpak succesvol is, wordt de SIB onafhankelijk getoetst door Erasmus Universiteit Rotterdam
El documento describe la anatomía y exploración de los 12 pares craneales. Se detalla que los nervios craneales del III al XII son auténticos nervios periféricos originados en el tronco cerebral, mientras que los pares I y II no son nervios propiamente dichos. A continuación, se explica brevemente la anatomía, exploración y patología de cada uno de los 12 pares craneales.
Emilie E. Jordan is a Latin instructor and PhD candidate in Classical Languages. She received her BA from St. Mary's College in 2005 and MA from the University of Kansas in 2009. Her teaching experience includes Latin courses at St. Mary's Academy from 2005-2009 and 2014-present, and Latin courses at St. Mary's College from 2008-present. She has presented at several conferences and completed continuing education including an intensive seminar in Ancient Greek at Yale in 2009. Her personal interests include choral singing, Gregorian chant, and acting.
Dr. Zhypargul Abdullaeva is an Assistant Professor at Kumamoto University specializing in nanomaterials. She received her Ph.D. from Kumamoto University in 2013. Her research focuses on synthesizing graphene and other nanomaterials using solvothermal and pulsed plasma methods. She has over 10 publications and patents in the field and has presented her work at numerous international conferences.
Clara Sammet has extensive experience in education, professional experience, and community service. She received her PhD in Educational Psychology from Walden University in 2014 and has worked as a university faculty member since. She has owned and operated several businesses related to landscaping, real estate development, and health care claims review. She has volunteered in local schools and maintains licenses and certifications in real estate and organizational psychology.
This document outlines the academic requirements and policies for pursuing a Doctor of Philosophy degree at the University of Adelaide. It discusses the required academic background, the possibility of receiving credit for prior work, enrollment procedures, duration and modes of study, program requirements, and policies regarding remote candidature. Key points include that candidates must have an appropriate bachelor's or master's degree, the degree is pursued through full-time or part-time research and thesis work under supervisor guidance, and programs are reviewed at 12 months to determine continuation in the PhD program.
Christian Beynis has extensive education and experience in physics, including a PhD from University at Buffalo in physics with a focus on chalcogenide semiconductors for solar cells. He has worked as a teacher's assistant and lecturer at UB, tutored physics and math, and conducted research synthesizing chalcogenide semiconductors for thin film solar cells. His technical skills include sample analysis, solar cell fabrication, and programming languages including C++, Python, and Matlab.
Dr. Sherry Shipley has over 20 years of experience in higher education, including her current role as Department Chair and Assistant Professor of Business Administration at Trine University. She holds a PhD in Industrial Technology Management from Indiana State University and has taught both online and blended courses at the undergraduate and graduate level. Dr. Shipley has received several teaching awards and has been actively involved in her community through volunteer work.
This document discusses rigid impression materials that are incapable of recording undercuts and often fracture or distort upon removal from the mouth. It focuses on impression plaster and compounds. Impression plaster sets rapidly but has low strength and is used for mobile soft tissues. Impression compound is a thermoplastic that comes in types for different purposes. It requires heating to the proper temperature for manipulation. Both materials can record fine details but lack elasticity and often fracture in undercut areas. The document also covers zinc oxide eugenol paste, which sets via an acid-base reaction and forms a chelate compound. It has low viscosity initially but sets to a rigid impression.
El documento habla sobre la logística en las franquicias. Explica que una franquicia es un tipo de contrato donde una empresa franquiciadora cede a un franquiciado la licencia de su marca registrada y sus métodos de negocio a cambio de pagos periódicos. De esta manera, el franquiciado puede aprovechar la experiencia y reconocimiento de la marca franquiciadora para iniciar su propio negocio con menos riesgo e inversión inicial.
Dhananjay Mishra is seeking a challenging career where he can utilize his aerospace engineering skills. He has a Bachelor of Technology degree in Aerospace Engineering from the University of Petroleum and Energy Studies with a focus on avionics. His academic and project experience includes developing an inertial navigation system with GPS integration using MATLAB, designing a matched filter for radar simulation, conducting airfoil curvature analysis in CATIA, and performing structural analysis projects in ANSYS. He has skills in CAD software like CATIA and SOLIDWORKS as well as FEA tools like ANSYS, Nastran, and Patran. He is proficient in programming languages like C and C++ and seeks to relocate for new opportunities.
Ritangshu Giri is seeking a position applying his knowledge and skills in fluid mechanics, both experimentally and computationally. He has a Master of Science in Aerospace Engineering from the University of Cincinnati and a Bachelor of Technology in Mechanical Engineering from the National Institute of Technology, Silchar, India. His thesis involved modeling and simulating non-reacting flows in a swirl stabilized lean pressure atomizer. He has work experience with Hindustan Petroleum Corporation and as a research assistant at the University of Cincinnati's Gas Dynamics and Propulsion Laboratory.
Bharat B. Sharma has over 3 years of experience as a CFD Researcher. He has expertise in performing geometry cleanups, mesh generation, and CFD simulations using tools like ANSYS Fluent and ICEM CFD. He has contributed to projects for organizations like CSIR-CMERI and SONA-KOYO. Currently, he is pursuing his PhD from Jadavpur University, investigating transport phenomena in loop heat pipes using CFD tools.
Ali Mosahebi has over 12 years of experience in mechanical and aerospace engineering, including 7 years in industry. He has advanced knowledge in fluid dynamics, aerodynamics, turbomachinery, thermodynamics, and heat transfer. Currently he is a Bombardier Research Fellow at École Polytechnique de Montréal where he leads collaborative R&D projects with Bombardier Aerospace. Previously he worked as a research assistant at McGill University and as a project manager and R&D engineer at the Vehicle, Fuel & Environment Research Institute in Iran. He holds a Ph.D. in Mechanical Engineering from McGill University.
The document summarizes the requirements for obtaining a PhD from the University of Adelaide. It states that a PhD involves 3-4 years of original research under supervision, which develops the capacity for independent research. Candidates must complete an approved program of study and research, and present a thesis demonstrating significant contributions to their field. The thesis can take various forms, but examiners will evaluate the candidate's knowledge, ability to relate their research to the broader field, independence, and contribution to knowledge.
Dr. Vikram R. Patil received his Ph.D in Chemistry from Bharati Vidyapeeth Deemed University in March 2014. His thesis was titled "Kinetics and Mechanism of Oxidation of Amides." He has over 9 years of teaching experience as a lecturer and assistant professor of chemistry. His areas of expertise include kinetics and mechanisms of oxidation reactions. He has published research papers in international and national journals on topics such as silver and cobalt catalyzed oxidation reactions of amides using bromamine-T.
The document summarizes a company that was founded in 1999 and is a leading provider of Bluetooth audio technology. It provides Bluetooth audio stacks, middleware, and reference designs for mobile phones, audio players and automotive electronics. Major customers include Broadcom, Sony, and Texas Instruments. The company was acquired by SiRF in 2005. It offers various Bluetooth related software and services including protocol stacks, audio middleware, and codec solutions.
Social media can increase teenagers' self-esteem when they share stories of their achievements online. Uploading accomplishments provides validation that may be lacking offline. Sharing successes may help teenagers struggling to make real-world connections find acceptance in the virtual world.
The document outlines commitments from a recruiting firm and recruiters to candidates regarding placement services. The firm pledges to uphold its values of quality, integrity, and teamwork. Recruiters will listen to candidates' needs, obtain permission before sharing resumes, treat candidates with the highest standards, and provide support through the hiring process and after placement. The document also lists expectations of candidates to communicate honestly and timely with recruiters and provide documentation within 24 hours when requested.
Mohamed Ahmed El-Degwhy is seeking a sales position that utilizes his 9 years of experience in the dairy industry. He has held several supervisory and managerial roles at various dairy companies in Egypt, including managing retail staff, coaching employees, analyzing market trends, and ensuring product availability. El-Degwhy has a Bachelor's degree in Commerce from Mansoura University and additional training in sales team management, market analysis, and negotiation skills.
Android ha pasado por varias versiones desde 2008 que han introducido mejoras en la interfaz, funcionalidad y rendimiento. La versión inicial de 2008 ofrecía un sistema operativo móvil gratuito y de código abierto. Versiones posteriores como Eclair en 2009, Gingerbread en 2010 e Ice Cream Sandwich en 2011 agregaron características como soporte para pantallas más grandes, actualizaciones automáticas y compatibilidad multi-dispositivo. Las últimas versiones como Nougat en 2016 y Oreo en 2017 han continuado perfeccionando el diseño y rendimiento de
R.N.Chandra Mouli is seeking a senior managerial position and has over 25 years of experience in retail operations, sales, marketing, and business development. He has expertise in sales target achievement, expense optimization, profit maximization, and people management. Currently he is working as Head of Marketing and Sales at IDEA Clinics in Hyderabad, leading a team and responsible for sales, operations, recruitment, and business growth. His career includes several managerial roles with increasing responsibility in healthcare companies based in Hyderabad.
Op 1 september 2015 heeft Werkplaats Rotterdam Zuid (WRZ) de deuren geopend. Deze Social Impact Bond heeft ten doel om de
komende vijf jaar 750 mensen met een grote afstand tot de arbeidsmarkt in Rotterdam Zuid aan een baan te helpen.
Een Social Impact Bond (SIB) is een financieringsinstrument waarbij private investeerders investeren in een innovatieve
maatschappelijke interventie. De investeerders krijgen uitbetaald door een overheid (gemeente, rijk) op basis van de besparing die
de Social Impact Bond realiseert.
De aanpak van WRZ is een innovatie binnen het sociaal/maatschappelijke domein. Dit project wordt privaat gefinancierd door
FondsDBL. De gemeente Rotterdam keert prestatiebeloningen uit naar gelang de prestaties van WRZ. De prestatiebelongingen worden
betaald uit de besparing die wordt gerealiseerd doordat mensen geen bijstandsuitkering meer nodig hebben. Om over 5 jaar te kunnen
onderbouwen of deze innovatieve aanpak succesvol is, wordt de SIB onafhankelijk getoetst door Erasmus Universiteit Rotterdam
El documento describe la anatomía y exploración de los 12 pares craneales. Se detalla que los nervios craneales del III al XII son auténticos nervios periféricos originados en el tronco cerebral, mientras que los pares I y II no son nervios propiamente dichos. A continuación, se explica brevemente la anatomía, exploración y patología de cada uno de los 12 pares craneales.
Emilie E. Jordan is a Latin instructor and PhD candidate in Classical Languages. She received her BA from St. Mary's College in 2005 and MA from the University of Kansas in 2009. Her teaching experience includes Latin courses at St. Mary's Academy from 2005-2009 and 2014-present, and Latin courses at St. Mary's College from 2008-present. She has presented at several conferences and completed continuing education including an intensive seminar in Ancient Greek at Yale in 2009. Her personal interests include choral singing, Gregorian chant, and acting.
Dr. Zhypargul Abdullaeva is an Assistant Professor at Kumamoto University specializing in nanomaterials. She received her Ph.D. from Kumamoto University in 2013. Her research focuses on synthesizing graphene and other nanomaterials using solvothermal and pulsed plasma methods. She has over 10 publications and patents in the field and has presented her work at numerous international conferences.
Clara Sammet has extensive experience in education, professional experience, and community service. She received her PhD in Educational Psychology from Walden University in 2014 and has worked as a university faculty member since. She has owned and operated several businesses related to landscaping, real estate development, and health care claims review. She has volunteered in local schools and maintains licenses and certifications in real estate and organizational psychology.
This document outlines the academic requirements and policies for pursuing a Doctor of Philosophy degree at the University of Adelaide. It discusses the required academic background, the possibility of receiving credit for prior work, enrollment procedures, duration and modes of study, program requirements, and policies regarding remote candidature. Key points include that candidates must have an appropriate bachelor's or master's degree, the degree is pursued through full-time or part-time research and thesis work under supervisor guidance, and programs are reviewed at 12 months to determine continuation in the PhD program.
Christian Beynis has extensive education and experience in physics, including a PhD from University at Buffalo in physics with a focus on chalcogenide semiconductors for solar cells. He has worked as a teacher's assistant and lecturer at UB, tutored physics and math, and conducted research synthesizing chalcogenide semiconductors for thin film solar cells. His technical skills include sample analysis, solar cell fabrication, and programming languages including C++, Python, and Matlab.
Dr. Sherry Shipley has over 20 years of experience in higher education, including her current role as Department Chair and Assistant Professor of Business Administration at Trine University. She holds a PhD in Industrial Technology Management from Indiana State University and has taught both online and blended courses at the undergraduate and graduate level. Dr. Shipley has received several teaching awards and has been actively involved in her community through volunteer work.
This document discusses rigid impression materials that are incapable of recording undercuts and often fracture or distort upon removal from the mouth. It focuses on impression plaster and compounds. Impression plaster sets rapidly but has low strength and is used for mobile soft tissues. Impression compound is a thermoplastic that comes in types for different purposes. It requires heating to the proper temperature for manipulation. Both materials can record fine details but lack elasticity and often fracture in undercut areas. The document also covers zinc oxide eugenol paste, which sets via an acid-base reaction and forms a chelate compound. It has low viscosity initially but sets to a rigid impression.
El documento habla sobre la logística en las franquicias. Explica que una franquicia es un tipo de contrato donde una empresa franquiciadora cede a un franquiciado la licencia de su marca registrada y sus métodos de negocio a cambio de pagos periódicos. De esta manera, el franquiciado puede aprovechar la experiencia y reconocimiento de la marca franquiciadora para iniciar su propio negocio con menos riesgo e inversión inicial.
Dhananjay Mishra is seeking a challenging career where he can utilize his aerospace engineering skills. He has a Bachelor of Technology degree in Aerospace Engineering from the University of Petroleum and Energy Studies with a focus on avionics. His academic and project experience includes developing an inertial navigation system with GPS integration using MATLAB, designing a matched filter for radar simulation, conducting airfoil curvature analysis in CATIA, and performing structural analysis projects in ANSYS. He has skills in CAD software like CATIA and SOLIDWORKS as well as FEA tools like ANSYS, Nastran, and Patran. He is proficient in programming languages like C and C++ and seeks to relocate for new opportunities.
Ritangshu Giri is seeking a position applying his knowledge and skills in fluid mechanics, both experimentally and computationally. He has a Master of Science in Aerospace Engineering from the University of Cincinnati and a Bachelor of Technology in Mechanical Engineering from the National Institute of Technology, Silchar, India. His thesis involved modeling and simulating non-reacting flows in a swirl stabilized lean pressure atomizer. He has work experience with Hindustan Petroleum Corporation and as a research assistant at the University of Cincinnati's Gas Dynamics and Propulsion Laboratory.
Bharat B. Sharma has over 3 years of experience as a CFD Researcher. He has expertise in performing geometry cleanups, mesh generation, and CFD simulations using tools like ANSYS Fluent and ICEM CFD. He has contributed to projects for organizations like CSIR-CMERI and SONA-KOYO. Currently, he is pursuing his PhD from Jadavpur University, investigating transport phenomena in loop heat pipes using CFD tools.
Ali Mosahebi has over 12 years of experience in mechanical and aerospace engineering, including 7 years in industry. He has advanced knowledge in fluid dynamics, aerodynamics, turbomachinery, thermodynamics, and heat transfer. Currently he is a Bombardier Research Fellow at École Polytechnique de Montréal where he leads collaborative R&D projects with Bombardier Aerospace. Previously he worked as a research assistant at McGill University and as a project manager and R&D engineer at the Vehicle, Fuel & Environment Research Institute in Iran. He holds a Ph.D. in Mechanical Engineering from McGill University.
Forrest G. Vaughn is an aerospace engineer seeking new opportunities. He has over 5 years of experience in structural design, finite element analysis, and project management for aerospace and power systems companies. His background includes work on spacecraft payload systems, gas turbine components, and unmanned aerial vehicles. Vaughn also has skills in 3D CAD modeling, simulation, and collaboration. He holds a Bachelor's degree in Aerospace Engineering from the University of Central Florida.
Dr. Muniyandy Elangovan has over 25 years of experience in ship design, construction, research, software development, and classification. He has worked as a designer, senior designer, design engineer, deputy manager, surveyor, senior surveyor, technical consultant, and technical director. He is currently an Associate Professor teaching industrial safety engineering. His research interests include reducing ship operational costs, improving transportation systems, and developing new marine software using technologies like cloud, big data analysis, and CFD. He has a Doctor of Engineering degree from Hiroshima University and has published over 30 research papers.
Ravikiran Anapagaddi provides a resume summarizing his education and work experience in steel process engineering. He received a Master's degree in chemical engineering from IIT Madras and worked as a process engineer and systems engineer developing mathematical models of various steelmaking processes. His work focused on areas like gasification, inclusion behavior, thermodynamic modeling, and developing reduced order models and optimization techniques for steel production processes.
Harsha Teja Garimella is a PhD candidate in Mechanical Engineering at Penn State. He received his BTech from IIT Guwahati in 2013 and is expected to receive his PhD from Penn State in June 2017. His research focuses on developing finite element models of the human head and brain using techniques like embedded elements to model axonal tractography and investigate brain injury from extreme loading. He has published journal articles and conference papers on this topic and received the second prize in the ASME IMECE 2016 PhD paper competition.
Immanuvel D is seeking entry-level managerial positions in R&D or production. He has a M.E. in Aeronautical Engineering and experience working on projects for DRDO and NAL. Currently he is a senior research fellow at PSG College of Technology. He has skills in CAD, CFD, and structural analysis software and experience in design, simulation, and computational analysis. He is interested in heat transfer, turbomachinery, and aerodynamics.
CV - Aravind Kamsanahally Sriramamurthy Aravind K S
My CV for search of opportunities in the domain of CAD based Software Development, 3D Parametric Modelling, Visual Programming, Structural Design & Analysis, Fracture Mechanics, FE Tool Development.
This document is a resume for Immanuvel D that provides personal and professional details. It summarizes his objective of seeking an entry-level managerial role in R&D or production. It outlines his work experience as a senior research fellow, technical qualifications in various design and simulation software, areas of interest in heat transfer and aerodynamics, and academic background including a M.E. in Aeronautical Engineering.
- Mehlam Jupiterwala has a Master's in Mechanical Engineering from Stony Brook University with a focus on thermal fluid science (CFD). They have experience designing nozzles, ducts, combustion processes, engine cooling/exhaust systems, and working on component and system level design. They are proficient in C, Fortran, CAD, and CFD software like ANSYS and COMSOL.
Ahmed F. Mahdi is a mechanical engineer with over 9 years of experience in engineering design, thermal and fluid systems, and teaching engineering. He has a Ph.D. in Mechanical & Equipment Engineering and certifications in AutoCAD, Inventor, SolidWorks, and Revit. His experience includes engineering design, finite element analysis, computational fluid dynamics, hydraulic and pneumatic systems design, and aircraft maintenance. Currently he is seeking opportunities as a mechanical engineer where he can apply his skills.
Autocad, solidworks, creo and ansys portfolio for slideshareRahul Gupta
this is a mechanical design engineer portfolio presentation.
In this present includes autocad drawing, solidworks models, PTC creo models and ansys simulation and analysis. It have also 3d printing process and 3d print sample.
H. Pratap is seeking a position that allows continual growth through applying his knowledge and skills. He has a B.E. in Mechanical Engineering and experience in CFD analysis of steam turbine valves through projects at Infosys, ALSTOM, and Central Power Research Institute. His technical expertise includes using ANSYS ICEM CFD, CFX, Hypermesh and other tools to perform meshing, fluid flow analysis, and predict critical erosion regions in hydro turbines.
This document provides a summary of an individual's experience as a senior structural engineer including:
- Over 8 years of experience performing finite element analysis for structures in defence, aerospace, and rail transportation using various CAE software.
- Experience leading projects involving structural analysis, testing, and documentation for clients such as DRDO, UTC, and Bombardier.
- Education includes a Bachelor's degree in Mechanical Engineering and diploma in Mechanical Engineering.
Pushkaraj Bhagwat is seeking a full-time position in product design and development utilizing his 2 years of experience in finite element analysis, computational solid mechanics, modeling and simulation. He has a Master's in Mechanical Engineering from the University of Cincinnati and experience with ANSYS, Abaqus, CATIA, SolidWorks and other engineering tools. His project experience includes structural design of a Hyperloop pod, crash analysis, fluid dynamics simulations, and optimization of diaper manufacturing equipment.
This document provides a summary of Ravikiran Anapagaddi's background and qualifications. It includes his contact information, education history, areas of interest, professional experience, projects undertaken, research projects, technical skills, publications, presentations, and training. The document highlights that he has a Master of Technology degree from IIT Madras and a Bachelor of Technology degree from GVP College of Engineering. He has over 5 years of work experience in process engineering and research related to mathematical modeling and simulation of metallurgical processes.
This document contains a summary of Alireza Bahrami's technical skills, engineering experiences, academic experiences, and education. It highlights his research focus on welding processes using CFD and FEA modeling at Clarkson University from 2010 to present. It also notes his experience applying renewable energy sources and designing energy efficient buildings in Iran from 2004 to 2010.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEMHODECEDSIET
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
New techniques for characterising damage in rock slopes.pdf
Koorosh gobal Resume
1. Koorosh Gobal
gobal.2@wright.edu ○ (714) 615 – 2962
EDUCATION
Doctor of Philosophy in Engineering (Anticipated: September 2016)
Concentration: Multidisciplinary Design and Optimization
Wright State University (WSU), Dayton, OH
Bachelor of Science, Mechanical Engineering (June 2012)
Sharif University of Technology, Tehran, Iran
Thesis: CFD Modelling of Particle Deposition in Human Respiratory Tracts
TECHNICAL SKILLS AND CORE COMPETENCIES
Finite Element Analysis (FEA): Abaqus, Nastran, ANSYS
Computation Fluid Dynamics (CFD): ANSYS Fluent, CFX, OpenFOAM, XFOIL
Structural Design Optimization
Reliability-based Design
Structural Health Monitoring
Computer Aided Design (CAD): SolidWorks, CATIA, AutoCAD, Seimens NX
Data Acquisition and Analysis
Computer Programming Languages: C++, Java, Python, MATLAB
Technical Presentation/Writing
PROFESSIONAL EXPERIENCE
Graduate Research Assistant (2012 – Present)
Ohio Center of Excellence for Product Reliability and Optimization (CEPRO)
WSU, Dayton, OH
o Researched methods for the design of aerospace structures under aero-elastic loads using multidisciplinary
design optimization (MDO) techniques
o Developed custom computational fluid dynamics software for viscous flows with immersed boundary technique
o Collaborated with Air Force Research Laboratory (AFRL), Air Vehicles Directorate & Virginia Tech
o Involved in proposal preparations and grant writing for research team
o Completed quarterly and annual progress reports submitted to AFRL research sponsors
o Presented research work at annual technical and advisory committee meetings
o Reliability analysis of wing-box to uncertainties in lifting surfaces shape and material defects
o Calculate aerodynamic loads for NACA series airfoil using XFOIL
o Design optimization of wing-box due to static aeroelastic loads based on panel method
o Validation of aerodynamic Pistion theory and CFD code with wind tunnel data for double wedge lifting surface
Structural Design Engineer (2010 – 2012)
Sangin Dandeh Company
Tehran, Iran
o Designed stone crusher gearbox using Abaqus
o Scanned and modeled different blades modules for use in spur gear production
o Disassembled and prepared drawings for gearbox components
o Prepared technical reports for designed components
HVAC Engineer (2009 – 2010)
Ashna Tech Company
Tehran, Iran
o CFD modeling of clean rooms using ANSYS Fluent/Gambit
o Designed cleanroom ventilation system according to ISO14644
o Design and CFD simulation of PEM impactor for monitoring the aerosols within a carpentry shop
2. Koorosh Gobal Page 2
Power Plant Engineer (Intern) (June – Aug 2010)
MAPNA Group, Iran Power Plant Projects Management Company
Tehran, Iran
o Conducted thermal modeling of heat transfer in gas turbine pipelines
o Design of a multi-pass shell and tube heat exchanger for preheating gas turbine vapor feed
o Designed thermal insulation for pipelines according to ASTM standard
Mechanical Engineer (Intern) (June – Aug 2009)
FARAB Company, Energy and Water Projects
Tehran, Iran
o Developed a MATLAB code for selecting bolts of the hydro-turbine casing according to VDI2230
o Developed CFD models for flow through a butterfly valve using ANSYS Fluent
o Propeller modeling for a medium size ship and investigating the shaft angle on its performance using CFD
JOURNAL ARTICLES
Gobal, K., Grandhi, R. V., and Kolonay, R. M. “Continuum Sensitivity Analysis for Structural Shape Design
Variables Using Finite-Volume Method.” AIAA Journal, Vol. 53, No. 2, 2014, pp. 347-355.
Vasu, A., Gobal, K., and Grandhi, R. V. “A computational methodology for determining the optimum re-peening
schedule to increase the fatigue life of laser peened aircraft components.” International Journal of Fatigue, Vol. 70,
2015, pp. 395-405.
PEER REVIEWED CONFERENCE PAPERS
Gobal, K., and Grandhi, R. V. “An Immersed Boundary Approach for Sensitivity Analysis of Fluid-structure
Interactions.” 11th World Congress on Structural and Multidisciplinary Optimization 7th - 12th, June 2015,
Sydney, Australia
Gobal, K., and Grandhi, R. V. “Aerodynamic Sensitivity Analysis based on Modified Navier-Stokes Equations.”
15th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 16th - 20th, June 2014, Atlanta, GA
Gobal, K., and Grandhi, R. V. “Nonlinear Aeroelastic Analysis of High Aspect-Ratio Wings Using Immersed
Boundary Technique” 53rd AIAA Aerospace Sciences Meeting, 5th - 9th, January 2015, Kissimmee, FL
PROFESSIONAL AFFILIATIONS
American Institute for Aeronautics and Astronautics (AIAA) (2014 – Present)
HONORS
Recipient of University Assistantship Award at WSU (2012)
Recipient of Graduate Research Assistantship at WSU (2013 – Present)
Reviewer of AIAA Journal (2014 – Present)
Ranked 84 among more than 600,000 attendees in the undergraduate studies entry exam (2006)
MISCELLANEOUS
Volunteer graphic designer at Tehran’s Council of Mobeds. (June – Aug 2011)
Volunteer organizer of sport competitions and cultural events at Zoroastrian Students Association. (2008 – 2012)