kk buildtech is one of the best waterproofing in Delhi NCR. we deal in all kinds of waterproofing Like Chemical waterproofing, Guniting, Kota, etc. We are the one of best waterproofing contactor in the market with holding experience of 30 years in the field. We are a team of qualified Civil Engineers, Supervisors and applicators working in this field for more than thirty years satisfactorily.
This document discusses various common waterproofing methods used in construction, including cementitious waterproofing, liquid waterproofing membranes, bituminous membranes and coatings, and polyurethane liquid membranes. Cementitious waterproofing uses easily available cement-based materials and is commonly used internally, while liquid membranes form flexible rubbery coatings. Bituminous membranes are popular for low-sloped roofs and come in torch-applied and self-adhesive types. Polyurethane liquid membranes offer high flexibility but are more expensive and sensitive to moisture levels. The document provides details on the materials, applications, advantages and limitations of each method.
This document discusses various aspects of waterproofing buildings, including:
1. It defines waterproofing as forming an impervious barrier to prevent water penetration through foundations, roofs, walls, and other structures.
2. It explains the need for waterproofing structures to provide moisture control, a safer foundation, healthier indoor environment by preventing mold/mildew, and eliminating insect growth.
3. It describes common waterproofing methods like cementitious, liquid membrane, bituminous membrane and coating, and polyurethane liquid membrane. It also discusses materials used and types available in the market.
This document summarizes the waterproofing treatment of the roof for an academic building. It discusses various waterproofing methods like cementitious waterproofing, liquid waterproofing membranes, bituminous membranes, bituminous coatings, and polyurethane liquid membranes. It also describes materials used for waterproofing like cement, sand, metal, brick bats, and various waterproofing chemicals. Finally, it covers damp proofing, damp proof courses, and causes and precautions for wall dampness.
This document discusses various methods and materials for waterproofing buildings. It describes common waterproofing materials like polyurethane liquid membranes, cementitious coatings, EPDM rubber, bituminous membranes, PVC, and thermoplastics. It also outlines methods for waterproofing basements, roofs, floors, toilets, and bathrooms. These include interior/exterior drainage systems and vapor barriers. Sheet and liquid-applied membrane waterproofing options are presented along with their advantages.
Which Waterproofing Method Should You Opt For?White metalco
Discover the optimal waterproofing method for your project. Explore sealants, membranes, and more to ensure effective protection against water damage. Make the right choice for long-lasting safeguarding.
WATERPROOFING,Damp proofing, Common Water Damage problems ,Benefits of Waterproofing,How Water can penetrate Concrete Strctures,Why Waterpoofing is Important,What could happen if a building isn’t waterproof , Importance of waterproofing in building ,Waterproofing Methods,Cementitious Waterproofing
Liquid Waterproofing Membrane,
Bituminous Membrane
Bituminous Coating
Polyurethane Liquid Membrane,
Problem solution for waterproofing,What is concrete cancerSix Common cause of concrete cancer include
Water proofing latest techniques and solutions, describes techniques for water proofing which are different from conventional techniques and the benefits of it. It also describes Bituminous coating technique.
Tanking refers to damp proofing walls retrospectively by creating a complete water-impermeable barrier. There are two main types of tanking methods: applying a damp proof membrane to the interior wall, or cementitious tanking where the wall is stripped and re-rendered with a cement mix. Both methods can be effective but also involve risks if not properly evaluated and applied. New materials are being developed that could provide a double protected system of interlocking waterproof panels with a cavity drain for mechanical water extraction to reduce risks.
This document discusses various common waterproofing methods used in construction, including cementitious waterproofing, liquid waterproofing membranes, bituminous membranes and coatings, and polyurethane liquid membranes. Cementitious waterproofing uses easily available cement-based materials and is commonly used internally, while liquid membranes form flexible rubbery coatings. Bituminous membranes are popular for low-sloped roofs and come in torch-applied and self-adhesive types. Polyurethane liquid membranes offer high flexibility but are more expensive and sensitive to moisture levels. The document provides details on the materials, applications, advantages and limitations of each method.
This document discusses various aspects of waterproofing buildings, including:
1. It defines waterproofing as forming an impervious barrier to prevent water penetration through foundations, roofs, walls, and other structures.
2. It explains the need for waterproofing structures to provide moisture control, a safer foundation, healthier indoor environment by preventing mold/mildew, and eliminating insect growth.
3. It describes common waterproofing methods like cementitious, liquid membrane, bituminous membrane and coating, and polyurethane liquid membrane. It also discusses materials used and types available in the market.
This document summarizes the waterproofing treatment of the roof for an academic building. It discusses various waterproofing methods like cementitious waterproofing, liquid waterproofing membranes, bituminous membranes, bituminous coatings, and polyurethane liquid membranes. It also describes materials used for waterproofing like cement, sand, metal, brick bats, and various waterproofing chemicals. Finally, it covers damp proofing, damp proof courses, and causes and precautions for wall dampness.
This document discusses various methods and materials for waterproofing buildings. It describes common waterproofing materials like polyurethane liquid membranes, cementitious coatings, EPDM rubber, bituminous membranes, PVC, and thermoplastics. It also outlines methods for waterproofing basements, roofs, floors, toilets, and bathrooms. These include interior/exterior drainage systems and vapor barriers. Sheet and liquid-applied membrane waterproofing options are presented along with their advantages.
Which Waterproofing Method Should You Opt For?White metalco
Discover the optimal waterproofing method for your project. Explore sealants, membranes, and more to ensure effective protection against water damage. Make the right choice for long-lasting safeguarding.
WATERPROOFING,Damp proofing, Common Water Damage problems ,Benefits of Waterproofing,How Water can penetrate Concrete Strctures,Why Waterpoofing is Important,What could happen if a building isn’t waterproof , Importance of waterproofing in building ,Waterproofing Methods,Cementitious Waterproofing
Liquid Waterproofing Membrane,
Bituminous Membrane
Bituminous Coating
Polyurethane Liquid Membrane,
Problem solution for waterproofing,What is concrete cancerSix Common cause of concrete cancer include
Water proofing latest techniques and solutions, describes techniques for water proofing which are different from conventional techniques and the benefits of it. It also describes Bituminous coating technique.
Tanking refers to damp proofing walls retrospectively by creating a complete water-impermeable barrier. There are two main types of tanking methods: applying a damp proof membrane to the interior wall, or cementitious tanking where the wall is stripped and re-rendered with a cement mix. Both methods can be effective but also involve risks if not properly evaluated and applied. New materials are being developed that could provide a double protected system of interlocking waterproof panels with a cavity drain for mechanical water extraction to reduce risks.
Modified bitumen multi-ply roofing systems provide redundancy through multiple layers of membrane protection compared to single-ply roofs. They have longer service life due to thicker, specialized membrane plies and increased puncture and weather resistance. While both system types can be installed with a 20+ year warranty, multi-ply offers more installation and repair flexibility through multiple attachment and surface options tailored to a building's unique needs and climate.
WATER PROOFING FOR BUILDING
The treatment given to prevent leakage of water from external source is generally termed as WATER PROOFING.
Usually extensive waterproofing measures are added to a building at the time of construction ,to provide moisture control form starting.
Waterproofing may also be done after a building is built ,to address problems as they emerge or as part of building retrofit.
Waterproofing. Concrete. Civil Engineering . Rebair & RehabYash Shah
This document discusses various waterproofing techniques used in construction. It begins by explaining why waterproofing is necessary to prevent damage to buildings from water ingress. Then it describes different types of waterproofing materials and methods, including liquid waterproofing membranes made of bitumen, polyurethane, or acrylics; sheet membranes such as EPDM, polymer-modified bitumen, or PVC; injectable grouts for repairs; and integral waterproofing admixtures added to concrete. The document provides details on the properties, advantages, and disadvantages of each technique. It emphasizes that proper selection and application of waterproofing methods is important to prevent water leakage into buildings.
Curing concrete is important to allow the cement hydration process to continue and develop strength over time. Proper curing ensures concrete reaches its designed strength and durability by controlling moisture loss. Common curing methods include water curing through ponding, sprinkling or wet coverings; membrane curing using plastic sheeting or curing compounds; and steam curing to accelerate strength gain. Curing should continue for at least 7 days for normal concrete and 14 days if blended cements are used. Inadequate curing can lead to reduced strength, increased permeability and poor durability.
Presentation by
Primary Information Services
www.primaryinfo.com
mailto:primaryinfo@gmail.com
Download PDF Version at
https://www.slideshare.net/thorapadi/presentations
See YouTube Channel
https://www.youtube.com/user/ch600091/videos?view_as=subscriber
Started to create milestones, we S. M. Adhesives marked our presence in the year 1998 and operates in the manufacturing/servicing of Inorganic Concrete Penetrant And Water Repellent, Expansion Joint Water Proofing System, SMAC EPOTAR HB (Coal Tar Epoxy Coating), Ecofriendly Exterior Paint, Drain Outlets Water Proofing System since 13 years. Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of Inorganic Concrete Penetrant And Water Repellent, Expansion Joint Water Proofing System, SMAC EPOTAR HB (Coal Tar Epoxy Coating), Ecofriendly Exterior Paint, Drain Outlets Water Proofing System, Anti Corrosive Coating that has made us to deepen our roots in the market. We S. M. Adhesives breathe with the aim to satisfy our clients with our smart products/services. We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
This document discusses the benefits of multi-ply roofing systems compared to single-ply systems. It notes that multi-ply systems provide redundancy through multiple waterproof layers that work together to defend against punctures, heat, UV light, and other threats. This redundancy extends the service life of the roof by allowing repairs to individual layers without replacing the whole system. The document also highlights how multi-ply systems are better suited than single-ply for withstanding foot and vehicle traffic during installation and maintenance of rooftop equipment over the roof's lifetime.
The document discusses surface preparation and application of undertile waterproofing membranes. It covers ensuring substrates are structurally sound, dry, free of contaminants and voids before applying primer and membranes in two coats with reinforcement at corners and joints. Factors like temperature, moisture and reinforcement installation are critical to achieving the required dry film thickness and preventing blistering.
Waterproof Membranes at Best Price in Australia 📞+61 1800 418 495 kodexcc
https://kodexcc.com/products/waterproofing-membranes
Explore Kodexxc's waterproofing membranes for durable and reliable solutions, perfect for your
buildings protection. Contact us today 1800 418 495 for membranes.
Protection: They protect structures from water damage, which can lead to decay, mold growth, and structural compromise.
Durability: Waterproofing membranes enhance the lifespan of buildings by preventing deterioration caused by water exposure.
Energy Efficiency: Proper waterproofing can improve insulation and reduce energy consumption by preventing moisture-related heat loss.
Cost Savings: Effective waterproofing reduces the need for costly repairs and maintenance caused by water damage.
Health and Comfort: Waterproofing helps maintain indoor air quality by preventing mold and mildew growth, enhancing occupant health and comfort.
Special Treatments required for building constructionUjasPandya2
various special treatments like termite treatments, damp proofing, fire protections, acoustics etc required in building construction in civil engineering. Essential treatments before and after construction of residential as well as public buildings. Services essential for building construction for maintenance and long life of building
The greatest method to keep your house mostly safe from water damage is to install waterproofing systems. Bacteria and mildew may thrive in the cosy habitat created by damp walls and ceilings.
There are several common causes of dampness in buildings, including rain penetration, poor drainage, and defective construction materials or techniques. To prevent dampness, it is important to use a damp proof course (DPC) or damp proof membrane (DPM) to block the rising of moisture from the ground. Other techniques include waterproof surface treatments and using integral damp proofing compounds in concrete or mortar. Proper site selection, building orientation, construction methods, and materials can also help reduce dampness in structures.
This document summarizes different methods of curing concrete and their effectiveness. It discusses that proper curing is crucial to obtaining design strength and maximum durability in concrete. Various curing methods are described, including ponding, fogging, wet coverings using burlap or impervious paper, membrane-forming compounds, internal curing using lightweight aggregates, leaving forms in place, and steam curing. Ponding and wet coverings using saturated materials are identified as most effective at maintaining moisture, while membrane compounds are more practical. The document concludes that curing method has a fundamental effect on concrete's mechanical properties and strengths. Immersion curing generally provides the best results.
How May Moisture Damage Be Prevented From Your Building With DPC Construction...yamunaNMH
Many people find the musty, wet smell of old buildings to be uncomfortable and unpleasant. Unbeknownst to you, these mouldy, wet structures can also be extremely harmful to your health? So, how can we avoid being victims of this unfavourable circumstance? The solution is DPC construction (Damp Proof Course). Even though undoing already-done damage could be costly, DPC can offer a long-term fix! Let’s clarify.
There are several common causes of dampness in buildings, including rain penetration, poor drainage, and defective construction materials or techniques. To prevent dampness, damp proof courses or membranes can be installed to form impervious barriers between floors, walls, and the ground. Surface treatments using waterproof plasters or paints can seal exterior surfaces. Integral treatments involve adding damp-proofing compounds to building materials like concrete and mortar. Properly installing damp proof courses, using waterproof finishes, and including damp-proofing additives can effectively prevent dampness in buildings.
The document discusses various aspects of waterproofing systems. It explains that conventional waterproofing involves applying membrane barriers to prevent water passage. It also notes that quality waterproofing is essential to preserve building envelope water-tightness, as below-grade areas and plaza decks experience hydrostatic pressure. The document then provides definitions for waterproofing versus damp-proofing and discusses different waterproofing materials and methods, including sheet membranes, liquid systems, bentonite, metal oxide, and cementitious options. It emphasizes that substrate preparation and multiple protective layers are important for effective waterproofing.
The document discusses considerations for basement waterproofing and grades of watertightness. It explains that the intended use of the basement determines the appropriate grade and level of waterproofing. Higher grades, like grade 4, require measures like a ventilated cavity to ensure a completely dry environment for uses like archives. Common ways to waterproof include reinforced concrete design, waterproofing membranes, and cavity drain systems. Quality of workmanship is important for successful waterproofing.
This document discusses various methods for curing concrete, which is important for developing the concrete's strength, stability, and durability. It describes three main categories of curing methods: using impermeable membranes to minimize moisture loss; continuously wetting the surface to prevent moisture loss; and methods that keep the surface moist while also raising the temperature to increase the rate of strength gain. Specific curing methods discussed include leaving formwork in place, applying curing compounds, using internal curing compounds, water curing through ponding or sprinkling, and using wet coverings like fabrics. Proper curing requires providing adequate moisture for continued hydration over the required curing period.
The document discusses three building construction materials: aluminum composite panels (ACP), curtain walls, and structural glazing. ACP sheets are thin aluminum sheets bonded to a non-aluminum core used for cladding, ceilings, and partitions. Curtain walls are non-structural exterior walls that keep weather out while allowing natural light in. They must be designed to handle loads and prevent air/water penetration. Structural glazing bonds glass directly to a building's structure using high-strength, high-performance silicone sealants to transfer wind loads from the glass.
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
More Related Content
Similar to kk bildtech Bitumen membrane waterproofing_.pdf
Modified bitumen multi-ply roofing systems provide redundancy through multiple layers of membrane protection compared to single-ply roofs. They have longer service life due to thicker, specialized membrane plies and increased puncture and weather resistance. While both system types can be installed with a 20+ year warranty, multi-ply offers more installation and repair flexibility through multiple attachment and surface options tailored to a building's unique needs and climate.
WATER PROOFING FOR BUILDING
The treatment given to prevent leakage of water from external source is generally termed as WATER PROOFING.
Usually extensive waterproofing measures are added to a building at the time of construction ,to provide moisture control form starting.
Waterproofing may also be done after a building is built ,to address problems as they emerge or as part of building retrofit.
Waterproofing. Concrete. Civil Engineering . Rebair & RehabYash Shah
This document discusses various waterproofing techniques used in construction. It begins by explaining why waterproofing is necessary to prevent damage to buildings from water ingress. Then it describes different types of waterproofing materials and methods, including liquid waterproofing membranes made of bitumen, polyurethane, or acrylics; sheet membranes such as EPDM, polymer-modified bitumen, or PVC; injectable grouts for repairs; and integral waterproofing admixtures added to concrete. The document provides details on the properties, advantages, and disadvantages of each technique. It emphasizes that proper selection and application of waterproofing methods is important to prevent water leakage into buildings.
Curing concrete is important to allow the cement hydration process to continue and develop strength over time. Proper curing ensures concrete reaches its designed strength and durability by controlling moisture loss. Common curing methods include water curing through ponding, sprinkling or wet coverings; membrane curing using plastic sheeting or curing compounds; and steam curing to accelerate strength gain. Curing should continue for at least 7 days for normal concrete and 14 days if blended cements are used. Inadequate curing can lead to reduced strength, increased permeability and poor durability.
Presentation by
Primary Information Services
www.primaryinfo.com
mailto:primaryinfo@gmail.com
Download PDF Version at
https://www.slideshare.net/thorapadi/presentations
See YouTube Channel
https://www.youtube.com/user/ch600091/videos?view_as=subscriber
Started to create milestones, we S. M. Adhesives marked our presence in the year 1998 and operates in the manufacturing/servicing of Inorganic Concrete Penetrant And Water Repellent, Expansion Joint Water Proofing System, SMAC EPOTAR HB (Coal Tar Epoxy Coating), Ecofriendly Exterior Paint, Drain Outlets Water Proofing System since 13 years. Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of Inorganic Concrete Penetrant And Water Repellent, Expansion Joint Water Proofing System, SMAC EPOTAR HB (Coal Tar Epoxy Coating), Ecofriendly Exterior Paint, Drain Outlets Water Proofing System, Anti Corrosive Coating that has made us to deepen our roots in the market. We S. M. Adhesives breathe with the aim to satisfy our clients with our smart products/services. We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
This document discusses the benefits of multi-ply roofing systems compared to single-ply systems. It notes that multi-ply systems provide redundancy through multiple waterproof layers that work together to defend against punctures, heat, UV light, and other threats. This redundancy extends the service life of the roof by allowing repairs to individual layers without replacing the whole system. The document also highlights how multi-ply systems are better suited than single-ply for withstanding foot and vehicle traffic during installation and maintenance of rooftop equipment over the roof's lifetime.
The document discusses surface preparation and application of undertile waterproofing membranes. It covers ensuring substrates are structurally sound, dry, free of contaminants and voids before applying primer and membranes in two coats with reinforcement at corners and joints. Factors like temperature, moisture and reinforcement installation are critical to achieving the required dry film thickness and preventing blistering.
Waterproof Membranes at Best Price in Australia 📞+61 1800 418 495 kodexcc
https://kodexcc.com/products/waterproofing-membranes
Explore Kodexxc's waterproofing membranes for durable and reliable solutions, perfect for your
buildings protection. Contact us today 1800 418 495 for membranes.
Protection: They protect structures from water damage, which can lead to decay, mold growth, and structural compromise.
Durability: Waterproofing membranes enhance the lifespan of buildings by preventing deterioration caused by water exposure.
Energy Efficiency: Proper waterproofing can improve insulation and reduce energy consumption by preventing moisture-related heat loss.
Cost Savings: Effective waterproofing reduces the need for costly repairs and maintenance caused by water damage.
Health and Comfort: Waterproofing helps maintain indoor air quality by preventing mold and mildew growth, enhancing occupant health and comfort.
Special Treatments required for building constructionUjasPandya2
various special treatments like termite treatments, damp proofing, fire protections, acoustics etc required in building construction in civil engineering. Essential treatments before and after construction of residential as well as public buildings. Services essential for building construction for maintenance and long life of building
The greatest method to keep your house mostly safe from water damage is to install waterproofing systems. Bacteria and mildew may thrive in the cosy habitat created by damp walls and ceilings.
There are several common causes of dampness in buildings, including rain penetration, poor drainage, and defective construction materials or techniques. To prevent dampness, it is important to use a damp proof course (DPC) or damp proof membrane (DPM) to block the rising of moisture from the ground. Other techniques include waterproof surface treatments and using integral damp proofing compounds in concrete or mortar. Proper site selection, building orientation, construction methods, and materials can also help reduce dampness in structures.
This document summarizes different methods of curing concrete and their effectiveness. It discusses that proper curing is crucial to obtaining design strength and maximum durability in concrete. Various curing methods are described, including ponding, fogging, wet coverings using burlap or impervious paper, membrane-forming compounds, internal curing using lightweight aggregates, leaving forms in place, and steam curing. Ponding and wet coverings using saturated materials are identified as most effective at maintaining moisture, while membrane compounds are more practical. The document concludes that curing method has a fundamental effect on concrete's mechanical properties and strengths. Immersion curing generally provides the best results.
How May Moisture Damage Be Prevented From Your Building With DPC Construction...yamunaNMH
Many people find the musty, wet smell of old buildings to be uncomfortable and unpleasant. Unbeknownst to you, these mouldy, wet structures can also be extremely harmful to your health? So, how can we avoid being victims of this unfavourable circumstance? The solution is DPC construction (Damp Proof Course). Even though undoing already-done damage could be costly, DPC can offer a long-term fix! Let’s clarify.
There are several common causes of dampness in buildings, including rain penetration, poor drainage, and defective construction materials or techniques. To prevent dampness, damp proof courses or membranes can be installed to form impervious barriers between floors, walls, and the ground. Surface treatments using waterproof plasters or paints can seal exterior surfaces. Integral treatments involve adding damp-proofing compounds to building materials like concrete and mortar. Properly installing damp proof courses, using waterproof finishes, and including damp-proofing additives can effectively prevent dampness in buildings.
The document discusses various aspects of waterproofing systems. It explains that conventional waterproofing involves applying membrane barriers to prevent water passage. It also notes that quality waterproofing is essential to preserve building envelope water-tightness, as below-grade areas and plaza decks experience hydrostatic pressure. The document then provides definitions for waterproofing versus damp-proofing and discusses different waterproofing materials and methods, including sheet membranes, liquid systems, bentonite, metal oxide, and cementitious options. It emphasizes that substrate preparation and multiple protective layers are important for effective waterproofing.
The document discusses considerations for basement waterproofing and grades of watertightness. It explains that the intended use of the basement determines the appropriate grade and level of waterproofing. Higher grades, like grade 4, require measures like a ventilated cavity to ensure a completely dry environment for uses like archives. Common ways to waterproof include reinforced concrete design, waterproofing membranes, and cavity drain systems. Quality of workmanship is important for successful waterproofing.
This document discusses various methods for curing concrete, which is important for developing the concrete's strength, stability, and durability. It describes three main categories of curing methods: using impermeable membranes to minimize moisture loss; continuously wetting the surface to prevent moisture loss; and methods that keep the surface moist while also raising the temperature to increase the rate of strength gain. Specific curing methods discussed include leaving formwork in place, applying curing compounds, using internal curing compounds, water curing through ponding or sprinkling, and using wet coverings like fabrics. Proper curing requires providing adequate moisture for continued hydration over the required curing period.
The document discusses three building construction materials: aluminum composite panels (ACP), curtain walls, and structural glazing. ACP sheets are thin aluminum sheets bonded to a non-aluminum core used for cladding, ceilings, and partitions. Curtain walls are non-structural exterior walls that keep weather out while allowing natural light in. They must be designed to handle loads and prevent air/water penetration. Structural glazing bonds glass directly to a building's structure using high-strength, high-performance silicone sealants to transfer wind loads from the glass.
Similar to kk bildtech Bitumen membrane waterproofing_.pdf (20)
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Structural Design Process: Step-by-Step Guide for BuildingsChandresh Chudasama
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...ABHILASH DUTTA
This presentation provides a thorough examination of Over-the-Top (OTT) platforms, focusing on their development and substantial influence on the entertainment industry, with a particular emphasis on the Indian market.We begin with an introduction to OTT platforms, defining them as streaming services that deliver content directly over the internet, bypassing traditional broadcast channels. These platforms offer a variety of content, including movies, TV shows, and original productions, allowing users to access content on-demand across multiple devices.The historical context covers the early days of streaming, starting with Netflix's inception in 1997 as a DVD rental service and its transition to streaming in 2007. The presentation also highlights India's television journey, from the launch of Doordarshan in 1959 to the introduction of Direct-to-Home (DTH) satellite television in 2000, which expanded viewing choices and set the stage for the rise of OTT platforms like Big Flix, Ditto TV, Sony LIV, Hotstar, and Netflix. The business models of OTT platforms are explored in detail. Subscription Video on Demand (SVOD) models, exemplified by Netflix and Amazon Prime Video, offer unlimited content access for a monthly fee. Transactional Video on Demand (TVOD) models, like iTunes and Sky Box Office, allow users to pay for individual pieces of content. Advertising-Based Video on Demand (AVOD) models, such as YouTube and Facebook Watch, provide free content supported by advertisements. Hybrid models combine elements of SVOD and AVOD, offering flexibility to cater to diverse audience preferences.
Content acquisition strategies are also discussed, highlighting the dual approach of purchasing broadcasting rights for existing films and TV shows and investing in original content production. This section underscores the importance of a robust content library in attracting and retaining subscribers.The presentation addresses the challenges faced by OTT platforms, including the unpredictability of content acquisition and audience preferences. It emphasizes the difficulty of balancing content investment with returns in a competitive market, the high costs associated with marketing, and the need for continuous innovation and adaptation to stay relevant.
The impact of OTT platforms on the Bollywood film industry is significant. The competition for viewers has led to a decrease in cinema ticket sales, affecting the revenue of Bollywood films that traditionally rely on theatrical releases. Additionally, OTT platforms now pay less for film rights due to the uncertain success of films in cinemas.
Looking ahead, the future of OTT in India appears promising. The market is expected to grow by 20% annually, reaching a value of ₹1200 billion by the end of the decade. The increasing availability of affordable smartphones and internet access will drive this growth, making OTT platforms a primary source of entertainment for many viewers.
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Best practices for project execution and deliveryCLIVE MINCHIN
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
1. What is Bitumen membrane waterproofing?
Bitumen membrane waterproofing is a way used to protect buildings and structures from water
penetration. It includes the application of bituminous (asphalt-based) membranes to various
surfaces, such as roofs, foundations, and walls. These layers are made of bitumen, which is a
sticky and viscous form of petroleum.
There are different types of bitumen films, including:
1. SBS (Styrene-Butadiene-Styrene) Modified Bitumen Membranes: These are flexible and
durable membranes that can withstand temperature changes and movements in the underlying
structure.
2. APP (Atactic Polypropylene) Modified Bitumen Membranes: These membranes have
added polypropylene, enhancing their resistance to UV rays and giving better flexibility in cold
temperatures.
3. Self-Adhesive Bitumen Membranes: These membranes come with a self-adhesive backing,
making them easy to install by simply peeling off the protective layer and sticking them to the
surface.
The application of bitumen membranes provides a waterproof barrier, stopping water from
seeping into the structure and causing damage. It's widely used in roofing systems, basements,
and other areas prone to water exposure.
So, in a word, bitumen membrane waterproofing is like giving your building a sturdy
raincoat to keep it dry and happy.
Why is bitumen membrane waterproofing one of the best
waterproofing services?
Bitumen membrane waterproofing has gained fame for several reasons that contribute to
its effectiveness as a waterproofing solution:
1. Durability: Bitumen membranes are known for their durability and ability to resist various
weather conditions, including extreme temperatures and UV exposure. This durability provides a
long-lasting waterproofing solution.
2. Flexibility: Many bitumen films, especially those modified with polymers like SBS or APP, are
flexible. This flexibility allows them to adapt to the movement and settling of the building without
losing their waterproofing capabilities.
2. 3. Adhesion: Bitumen membranes often have excellent adhesion qualities, ensuring a strong
bond to the substrate. This stops water from finding its way through seams or gaps, providing a
reliable barrier against water infiltration.
4. Versatility: Bitumen membranes are flexible and can be applied to various surfaces,
including roofs, foundations, and walls. They are ideal for both new construction projects and as
a solution for waterproofing existing structures.
5. Ease of Application: The application of bitumen membranes is usually simple, especially
with self-adhesive variants. This can reduce the complexity and time needed for installation
compared to some other waterproofing methods.
6. Cost-Effectiveness: Bitumen membrane waterproofing is often considered cost-effective in
terms of both supplies and installation. This makes it an attractive choice for a wide range of
construction projects.
7. Proven Track Record: Bitumen layer waterproofing has been used for many years and has
a proven track record of success in protecting buildings from water damage. Its reliability has
contributed to its continued use in the construction business.
However, it's important to note that the effectiveness of any waterproofing method relies on
factors such as proper installation, maintenance, and the specific requirements of the building.
While bitumen membrane waterproofing is a popular choice, the best solution may vary based
on the unique characteristics of each building project.
Why is bitumen membrane waterproofing so important?
Bitumen membrane waterproofing plays a crucial part in protecting buildings and
structures from the damaging effects of water infiltration. Here's why it's so important:
1. Prevents Water Damage: The main purpose of waterproofing is to prevent water from
penetrating the structure. Water can cause severe damage to buildings, leading to issues such
as rot, mold growth, and deterioration of building materials. Bitumen membrane provides a
barrier that keeps water out, keeping the integrity of the structure.
2. Increases Structural Longevity: Water damage can greatly reduce the lifespan of a
building. By preventing water ingress, bitumen membrane waterproofing helps stretch the life of
the structure, saving on repair and replacement costs in the long run.
3. Protects Interior Spaces: Waterproofing is important to protect interior spaces from water
leaks. It avoids damage to walls, ceilings, and possessions inside the building. This is
particularly important in places prone to heavy rainfall or where groundwater levels are high.
3. 4. Prevents Mold and Mildew: Moisture infiltration can create a climate conducive to the
growth of mold and mildew. These not only compromise indoor air quality but can also pose
health risks. Bitumen membrane waterproofing helps in making a dry environment, stopping the
growth of harmful microorganisms.
5. Preserves Insulation: Water infiltration can compromise the efficiency of insulation
materials. By keeping water out, the bitumen branesrane helps maintain the thermal efficiency
of insulation, adding to energy savings and occupant comfort.
6. Minimizes Maintenance Costs: Regular maintenance and repairs due to water damage can
be expensive. Bitumen membrane waterproofing provides a proactive and cost-effective solution
to avoid such damage, reducing the need for frequent and expensive repairs.
7. Maintains Property Value: Waterproofing adds to the overall structural integrity and
aesthetics of a building. A well-maintained, dry structure retains its value over time, making it
more attractive to possible buyers or tenants.
8. Complies with Building Codes: Many building rules and regulations require proper
waterproofing to ensure the safety and longevity of structures. Adhering to these standards not
only stops legal issues but also ensures that the building meets quality and safety requirements.
In essence, bitumen membrane waterproofing is important because it safeguards the
investment in a building, protects its occupants, and adds to its long-term sustainability. It's a
proactive measure that addresses the basic challenge of keeping water where it
belongs—outside the structure.
What is the Procedure for Bitumen Membrane waterproofing?
The process for bitumen membrane waterproofing typically involves several key steps. Keep in
mind that the specific details may vary based on the type of bitumen membrane used and the
characteristics of the surface being waterproofed. Here's a general overview:
1. Surface Preparation: - Ensure that the surface is clean, dry, and free from dust, dirt, and
other contaminants.
● Repair any cracks, holes, or uneven spots on the surface.
2. Priming (if necessary): - Some surfaces may require priming to improve the adhesion of the
bitumen membrane. This is particularly important for porous or uneven surfaces.
3. Membrane Application: - Roll out the bitumen membrane onto the prepared area.
4. ● Use a propane torch or hot air gun to heat the membrane, providing proper adhesion to
the substrate.
● For self-adhesive membranes, simply peel off the protected backing and press the
membrane onto the surface.
4. Overlapping Seams: - Overlap the edges of adjacent membrane sheets according to the
manufacturer's specs. This helps make a continuous and watertight barrier.
5. Sealing and Detailing: - Seal any seams, edges, or penetrations with additional layers of
bitumen membrane or compatible sealant to avoid water infiltration.
6. Protection Layer (if required): - In some cases, a protective layer, such as a layer of sand
or gravel, may be placed over the bitumen membrane to shield it from UV rays and physical
damage.
7. Quality Checks: - Conduct thorough quality checks to ensure that the installation is uniform,
free of defects, and meets the manufacturer's specs.
8. Final Inspection: - Inspect the entire waterproofing system for any overlooked problems.
● Ensure that all details, such as flashings and transitions, are properly handled.
9. Post-Installation care: - Provide guidelines for post-installation care to ensure the ongoing
effectiveness of the waterproofing system.
It's crucial to follow the manufacturer's guidelines and suggestions throughout the entire
process. Additionally, compliance with local building codes and regulations is important to
ensure that the waterproofing system meets the required standards. If you're not comfortable
with a blowtorch, maybe leave this one to the pros!
Advantages of Bitumen Membrane waterproofing
Bitumen membrane waterproofing offers several benefits, making it a popular choice for
protecting buildings and structures. Here are some key advantages:
1. Waterproofing Effectiveness: The primary benefit is, of course, its effectiveness in creating
a waterproof barrier. Bitumen membranes provide a reliable shield against water infiltration,
avoiding damage to the structure.
2. Durability: Bitumen membranes are known for their longevity and resistance to weathering.
They can resist various environmental conditions, including UV exposure, temperature
fluctuations, and harsh weather.
3. Flexibility: Many bitumen coverings are flexible, allowing them to adapt to the movement and
settling of the building. This flexibility prevents cracks or damage to the waterproofing layer,
keeping its integrity over time.
5. 4. Ease of Application: The application of bitumen membranes is often simple, especially with
self-adhesive variants. This can result in faster and more cost-effective installations compared to
some other waterproofing methods.
5. Compatibility with Various Surfaces: Bitumen membranes can be added to a variety of
surfaces, including concrete, metal, wood, and more. This versatility makes them suitable for
different types of construction jobs.
6. Range of Types: There are different types of bitumen membranes, including SBS and
APP-modified membranes, as well as self-adhesive versions. This variety allows for flexibility in
choosing the most suitable membrane for a particular application.
7. Cost-Effective: Bitumen membrane waterproofing is often considered cost-effective in terms
of both supplies and installation. This can be particularly beneficial for large-scale construction
projects.
8. Proven Track Record: Bitumen layer waterproofing has been used for many years and has
a proven track record of success in protecting buildings. The reliability of this method is backed
by its extensive use in the construction business.
9. Low Maintenance: Once properly installed, bitumen membrane waterproofing generally
needs low maintenance. This is helpful for building owners and managers, reducing the need for
frequent and costly repairs.
10. Energy Efficiency: By maintaining the integrity of insulation materials, bitumen membrane
waterproofing adds to energy efficiency within the building. It helps protect the thermal
performance of insulation, leading to potential energy savings.
11. Compliance with Building Codes: Bitumen membrane waterproofing systems often
comply with building codes and standards, ensuring that the waterproofing solution meets
needed safety and quality specifications.
These benefits collectively make bitumen membrane waterproofing a reliable and preferred
choice for protecting structures from water damage.
6. The benefits of using KK Buildtech Waterproofing Bitumen
Membrane Waterproofing Services
KK Buildtech is a leading waterproofing company in Delhi that provides a wide range of
services, including bitumen membrane waterproofing. Bitumen membrane waterproofing is a
popular and effective way to protect your home from water damage. It is a versatile material that
can be used on a variety of surfaces, including roofs, terraces, and basements.
Here are some of the benefits of using KK Buildtech Waterproofing Bitumen Membrane
Waterproofing Services:
Durability: Bitumen membrane waterproofing is a durable material that can withstand harsh
weather conditions. It is also resistant to UV rays, chemicals, and foot traffic.
Flexibility: Bitumen membrane waterproofing is a flexible material that can conform to irregular
shapes and surfaces. This makes it an ideal choice for roofs, balconies, and other areas with
complex geometry.
Waterproofing: Bitumen membrane waterproofing is an effective way to prevent water from
entering your home. It can be used to seal cracks and gaps and create a waterproof barrier
around your home.
Longevity: Bitumen membrane waterproofing can last for many years with proper care and
maintenance.
KK Buildtec is an experienced and reputed company providing high-quality bitumen
membrane waterproofing services. They use the latest materials and technologies to ensure
that your home is safe from water damage.
In addition to the benefits listed above, KK Buildtech also offers many other benefits, including:
Free Consultation: KK Buildtech offers a free consultation to assess your needs and
recommend the best waterproofing solution for your home.
Competitive Pricing: KK Buildtech offers competitive pricing for its bitumen membrane
waterproofing services.
Warranty: KK Buildtech offers a warranty on its bitumen membrane waterproofing services.
If you are considering KK Buildtec Waterproofing bitumen membrane waterproofing services, I
encourage you to contact us today for a free consultation.