This is a slab formwork that is without a primary beam and a second beam. Also, it comes with an early-stripping head which helps to save lots of time and money.

1. Panel
1. Made of 6061-T6 & birch plywood(10mm thickness).
2. Size:1800x1200/1800x900/1800x600/1200x1200/
1200x900/1200x600/900x900/900x600/600x600mm.

2. 10mm Birch Plywood
68.16Mpa
Double sides are covered with film and
spraying waterproof paint around the edge.
Self-color & Powder-coated
Welding by robot Steel Core

3. Filler Beam
1. Made of aluminum(6061-T6) & birch plywood &ZG270-500.
2. Length: 600/900/1200/1800mm .
Lock Pin
Made of Q235 (Zinc plated). One filler beam has two lock pins.

4. Early-stripping Head
1. Made of Q235 and ZG230-450 (Zinc plated).
2. Height is 300mm.

5. Steel Prop
1. Made of Q235 & 20# (Powder-coated & Hot dip galvanized).
2. Adjustable length is 1950-3350mm.
3. Loading Capacity: 21KN -41KN (3:1).

6. We have 1000/1500/200mm extend leg for the high floor. It is made of Q235 (Powder-coated).

7. If the project has beam, it needs the support head. The height is 315mm and the surface treat is
zinc plated. Also, it is made of 20# and ZG270-550.

8. Truss
1. Made of Q235 (Powder-coated).
2. Length: 600/900/1200/1800mm (width is 600mm).

9. U Head
1. Made of Q235 (Hot dip galvanized).
2. When it can not use the early-stripping head, we use U head to replace.

10. Guardrail Post
1. Made of Q235 (Powder-coated).
2. Length is 1399mm.

11. Cantilever Support Brace
1. Made of Q 235 (Zinc plated).
2. Adjustable length is 2820-4780mm.

12. Panel Tool
1. Made of Q235 (Powder-coated).
2. Adjustable length is 1900-3398mm.
3. Use for assembly & disassembly panels.