JM- iso 898 1 bolt mechanical properties and head marking
•
1 like•3,259 views
This document provides specifications for various bolt sizes including diameter, tension strength, yield strength, proof load, elongation, and hardness based on ISO 898-1 standards. Bolt sizes range from 4.6mm to 12.9mm diameter with minimum property requirements defined for each size and grade, including B67-95 through C39-44. The bottom section lists head markings that indicate bolt grade according to ISO 898-1 and DIN931/933 standards.
Report
Share
Report
Share
Download to read offline
Recommended
WELDER QUALIFICATION TEST CERTIFICATE
This document is a welder qualification test certificate for heat fusion bonding of polyvinylidene fluoride pipe. It certifies that the welder passed tests joining pipe with diameters between 25mm and 110mm and wall thicknesses between 2mm and 8mm, using sleeve/socket joints in all positions. The tests were conducted on sample pipes with outside diameters of 32mm, 50mm, and 75mm to cover the full range of sizes.
Tecnical aplicacion1 abb
This document discusses selectivity techniques for low voltage circuit breakers, including time-current selectivity, current selectivity, time selectivity, energy selectivity, and zone selectivity. It defines key terms like selectivity, total discrimination, partial discrimination, overload zone, and short-circuit zone. The document also discusses how to evaluate the real currents circulating in circuit breakers and the importance of considering tolerances when analyzing selectivity.
WPS_ISO_form_template.pdf
This document provides a preliminary welding procedure specification (WPS) for welding pipe. It specifies TIG welding for the root pass and MMA welding for the fill and cap passes. The WPS qualifies butt joints in pipe using filler metals ER70S-6 and E7018-1 for welding ASTM A333 Grade 6 pipe that is 10.97 mm thick with an outside diameter of 168.3 mm. The WPS is applicable for welding in the horizontal-fixed position.
ASME Section IX Presentation.pptx
The document summarizes the key parts and requirements of the ASME BPVC Section IX code related to welding. It describes that Section IX is divided into four parts, including Part QW for welding. Part QW further divides welding into five articles related to general requirements, procedure qualification, performance qualification, welding data, and welding procedure specifications. The document then focuses on explaining the requirements in Part QG, including procedure specifications, procedure qualification records, performance qualification, variables, and organizational responsibilities.
API_510_for_Exam.pdf
This document provides an overview of API 510 exam preparation materials covering service restrictions, joint efficiencies, and radiography requirements in ASME Section VIII. Some key points:
- Welded joints in vessels containing lethal substances must be fully radiographed and the vessel postweld heat treated if carbon/low alloy steel. Category A joints must be Type 1 (double welded) while Categories B-C can be Type 1 or 2.
- Joint categories define joint locations (e.g. longitudinal, circumferential). Type defines joint construction (e.g. double welded, single welded).
- Radiographs must show a minimum penetrameter image and identify unacceptable imperfections over certain size thresholds
Painting procedure rev 0 (d 1157)
This document provides procedures for surface preparation and protective coating of carbon steel. It outlines responsibilities, safety requirements, surface preparation methods including abrasive blasting, coating application procedures, materials, and record keeping. The foreman and QC engineer are responsible for ensuring work complies with specifications. Proper abrasive blasting is required to achieve a 2-2.5 mil surface profile. A three-coat paint system consisting of a zinc-rich epoxy primer, epoxy mid-coat, and polyurethane finish coat is specified, with total dry film thickness of 10 mils. Inspection reports are required to document compliance.
Welding qualification a
This document discusses welding qualification requirements and procedures. It covers the need for welding procedures to be qualified according to applicable codes and standards. It also describes the process for qualifying welding procedures, which involves preparing a welding procedure specification, making a test weld coupon according to the WPS, performing mechanical tests on the coupon, and documenting the results in a procedure qualification record. The variables that determine whether a change requires requalification are also outlined.
Recommended
WELDER QUALIFICATION TEST CERTIFICATE
This document is a welder qualification test certificate for heat fusion bonding of polyvinylidene fluoride pipe. It certifies that the welder passed tests joining pipe with diameters between 25mm and 110mm and wall thicknesses between 2mm and 8mm, using sleeve/socket joints in all positions. The tests were conducted on sample pipes with outside diameters of 32mm, 50mm, and 75mm to cover the full range of sizes.
Tecnical aplicacion1 abb
This document discusses selectivity techniques for low voltage circuit breakers, including time-current selectivity, current selectivity, time selectivity, energy selectivity, and zone selectivity. It defines key terms like selectivity, total discrimination, partial discrimination, overload zone, and short-circuit zone. The document also discusses how to evaluate the real currents circulating in circuit breakers and the importance of considering tolerances when analyzing selectivity.
WPS_ISO_form_template.pdf
This document provides a preliminary welding procedure specification (WPS) for welding pipe. It specifies TIG welding for the root pass and MMA welding for the fill and cap passes. The WPS qualifies butt joints in pipe using filler metals ER70S-6 and E7018-1 for welding ASTM A333 Grade 6 pipe that is 10.97 mm thick with an outside diameter of 168.3 mm. The WPS is applicable for welding in the horizontal-fixed position.
ASME Section IX Presentation.pptx
The document summarizes the key parts and requirements of the ASME BPVC Section IX code related to welding. It describes that Section IX is divided into four parts, including Part QW for welding. Part QW further divides welding into five articles related to general requirements, procedure qualification, performance qualification, welding data, and welding procedure specifications. The document then focuses on explaining the requirements in Part QG, including procedure specifications, procedure qualification records, performance qualification, variables, and organizational responsibilities.
API_510_for_Exam.pdf
This document provides an overview of API 510 exam preparation materials covering service restrictions, joint efficiencies, and radiography requirements in ASME Section VIII. Some key points:
- Welded joints in vessels containing lethal substances must be fully radiographed and the vessel postweld heat treated if carbon/low alloy steel. Category A joints must be Type 1 (double welded) while Categories B-C can be Type 1 or 2.
- Joint categories define joint locations (e.g. longitudinal, circumferential). Type defines joint construction (e.g. double welded, single welded).
- Radiographs must show a minimum penetrameter image and identify unacceptable imperfections over certain size thresholds
Painting procedure rev 0 (d 1157)
This document provides procedures for surface preparation and protective coating of carbon steel. It outlines responsibilities, safety requirements, surface preparation methods including abrasive blasting, coating application procedures, materials, and record keeping. The foreman and QC engineer are responsible for ensuring work complies with specifications. Proper abrasive blasting is required to achieve a 2-2.5 mil surface profile. A three-coat paint system consisting of a zinc-rich epoxy primer, epoxy mid-coat, and polyurethane finish coat is specified, with total dry film thickness of 10 mils. Inspection reports are required to document compliance.
Welding qualification a
This document discusses welding qualification requirements and procedures. It covers the need for welding procedures to be qualified according to applicable codes and standards. It also describes the process for qualifying welding procedures, which involves preparing a welding procedure specification, making a test weld coupon according to the WPS, performing mechanical tests on the coupon, and documenting the results in a procedure qualification record. The variables that determine whether a change requires requalification are also outlined.
Automotive Circle Conference: bmw insight edition 2016 - Constellium presenta...
Constellium presented the theme "Stiffness Improved Aluminium Alloys for Automotive Body Sheet Applications"
Sudkabel EHV XLPE Cable Terminations & Cable Joints
1. The document discusses Südkabel's range of accessories for XLPE-insulated high and extra-high voltage cables, including compact terminations, outdoor terminations, and joints.
2. Südkabel offers a variety of compact termination types for different voltage applications that are maintenance-free, quick to install, and can accommodate different cable designs.
3. Outdoor terminations can be filled with liquid insulation or use dry, gas-filled designs. They meet relevant test standards and are available with composite or porcelain insulators.
REPORT ON FIRE INCIDENT
As on 03rd March 2018 around 2.30 PM a sudden Fire Incident took place at Huplong Bazar (Under Jubarajnagar RD Block, Dharmanagar, North Tripura), where as many as 110 Shops burned to ashes along with all the goods and furniture’s.
Welding book
THIS BOOK IS VERY IMPORTANT TO WHO IS GOING TO BE A WELDER TO CARRY OUT WELDING PROCESS IN A WELDING WORKSHOP.
Pqr asme ix completed
This document is a welder performance qualification record that certifies welder Elder Z.W. It summarizes the tests conducted including:
- Welding process used was gas tungsten arc welding in the 6G position.
- Materials welded were SA-106 Grade B carbon steel pipes 0.875 inches thick.
- Visual and guided bend tests were conducted and met the acceptance criteria of ASME Section IX.
Overview fusion welding standards
This document provides an overview of European and international standards related to welding. It lists numerous standards organized by topic, including standards for welding procedures, welder qualification, inspection and testing of welds, classification of welding consumables, and safety. The standards cover various welding processes and materials like steel, aluminum, titanium and more.
Wind Turbine Blade Reliability, Effects of Manufacturing Defects and Composit...
Wind Turbine Blade Reliability, Effects of Manufacturing Defects and Composit...Sandia National Laboratories: Energy & Climate: Renewables
This document summarizes research on defects in wind turbine composite materials and repairs. It discusses how manufacturing defects like waves and porosity affect the strength of composite laminates and substructures. Both experimental testing and computational modeling were used to analyze the effects of full-width and partial-width defects. The results show that partial defects allow for more load redistribution than full defects. Adhesive bonding quality and thick adhesive joints were also discussed. Composite repair techniques and their effects were evaluated through testing of coupons and substructures.Flange Bolt Chart
This document provides specifications for flanges and bolts for piping systems. It includes tables with information on flange size, bolt quantity, stud size, and end-to-end length for different pipe sizes. The tables cover Class 150, 300, 400, 600 and 900 flanges under product lines such as Series A, B, and others.
Torque to yield fasteners
Torque-to-yield bolts are better than standard bolts for clamping because they provide more consistent torque over varying conditions and are designed to match the gasket and prevent failures. The bolts stretch into the plastic deformation region when tightened, meaning they will not loosen on their own. However, overtightening the bolts can cause them to snap, so it is important to follow the shop manual's instructions for the correct torque and tightening procedure.
Brugg Cable Tools - High Voltage Cable Jointing Tools
This document provides information on various tools from Brugg Cables for working with polymer cables, including:
1) Cutting and peeling devices for shaping cable insulation up to diameters of 130mm and 150mm.
2) A handheld peeling and stripping tool for removing outer layers from cables up to 160mm diameter.
3) Motorized peeling tools for removing semiconductor layers from cables up to 150mm diameter.
4) An electro-hydraulic pump and press head for pressing bolts and sleeves onto cables up to 1000mm2.
U.S. Bellows Expansion Joints In-Depth Webinar
U.S. Bellows is a manufacturer of metallic and fabric expansion joints located in Houston, Texas. They have over 450,000 square feet of manufacturing space and 800 years of combined experience among their staff. U.S. Bellows produces a wide variety of expansion joints from 2 to 138 inches in diameter out of materials like stainless steel, Monel, and Hastelloy to withstand high temperatures and corrosion. They provide expansion joints, technical support, and custom engineering solutions to industries worldwide.
SPIROL Slotted Spring Pin Design Guide
Slotted spring pins are general purpose fasteners that provide continuous pressure inside holes due to their spring action. They can accommodate wider tolerances than solid pins, reducing manufacturing costs. SPIROL slotted pins have advantages over other brands like lower insertion force and better conformance to holes. SPIROL is a global supplier of high quality slotted pins and offers various sizes, materials, finishes and related installation equipment.
criteria of weld defects
The document discusses weld defect acceptance criteria according to different codes such as ASTM B31.1, ASME VIII, ASME B31.3, and AWS D1.1. It provides details on acceptance limits for various weld defects depending on the examination method, material thickness, loading conditions, and material application. Defects discussed include cracks, lack of fusion, incomplete penetration, undercuts, porosity, and reinforcement. Acceptance criteria include maximum defect sizes, numbers of defects allowed, cumulative lengths of defects, and distances between defects.
Orifice Plates
The document discusses orifice plate flow measurement. It describes the different types of orifice plates including square edge, quarter circle, segmental, and eccentric. It also discusses orifice plate materials like stainless steel, Hastelloy, Monel, and titanium. The document provides details on ANSI B16.36 orifice flanges, integral orifice assemblies, impulse piping, and technical specifications.
Copper wire drawing and enamelling
Copper Wire Drawing and Enamelling. Manufacturing of Copper and Copper Products. Start Your Own Industry In Wire & Copper.
Copper wire is an essential material for motor and transformer winding. Copper wire is available in different gauges (32 gauge to 18 gauge). The gauge of the copper wire depends upon the winding required for the specific motor or transformer. The wire having conductor diameter from 0.500 to 4.000 mm, is suitable for submersible motor winding. There is a heavy market for copper wire/enamelled copper wire in motor and transformer manufacturers and this wire is also used in rewinding of motors and transformers. Reasons for its wide use is that the copper has resistance to atmospheric corrosion because of the formation of uniform layer of oxide on the surface of metal.
For More Details, Click Here: https://niir.org/profile-project-reports/profiles/copper-copper-products-projects/z,,61,14,a/index.html?_sort_by=default
https://niir.org/profile-project-reports/profile/4530/copper-wire-drawing-enamelling.html
Contact us
Niir Project Consultancy Services
An ISO 9001:2015 Company
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
277 1992
This document is the Indian Standard specification for galvanized steel sheets, both plain and corrugated. It outlines the requirements, classifications, testing procedures and tolerances for galvanized steel sheets intended for general purposes like panelling and roofing. The standard specifies three classifications for galvanized plain and corrugated sheets based on the grade of raw material used. It also provides requirements for the zinc coating thickness, bend testing, coating mass determination and retests in case of failure. Dimensions and tolerances for plain sheets/coils are defined.
Fatigue Technology - Corporate Brochure
FTI is a leading provider of cold expansion products for the aerospace industry. Their products include bushings, fittings, fastening systems, and cold working solutions that are engineered to improve structural performance, reduce costs, and simplify production and maintenance. FTI has over 40 years of experience innovating cold expansion technologies and working closely with customers such as Boeing and the US Air Force to develop solutions that optimize aircraft structural integrity and performance.
Swagelok
Este documento proporciona información sobre diferentes tipos de mangueras y tubos flexibles, incluyendo sus materiales de construcción, tamaños disponibles, rangos de presión y temperatura de servicio. Se incluye una guía de selección que resume las especificaciones clave de cada serie. El documento también contiene términos relacionados con las mangueras y tubos flexibles.
Asme sec viii div 2
This document summarizes ASME Section VIII Division 2 requirements for welding and non-destructive testing of welds. It outlines weld categories, fabrication requirements including repair of defects, welding identification markings, and acceptance standards for radiographic, penetrant, and ultrasonic testing of welds. Impact testing of welds is also addressed including testing of vessel test plates to qualify welding procedures for different weld categories.
2. Heat Shrink Cable Termination (HV) - 11kV 33kV Single Core XLPE BS6622 Cables
2. Heat Shrink Cable Termination (HV) - 11kV 33kV Single Core XLPE BS6622 CablesThorne & Derrick International
This document provides installation instructions for heat shrink termination of single core polymeric cables rated between 7.2kV and 36kV. The instructions are as follows:
1. Remove the outer cable sheath to the specified length and remove any fillers.
2. Treat the cable screen by applying mastic tape and removing copper wires or tape to the specified points before attaching an earth braid.
3. Treat the conductive layer by removing it to the specified points using the appropriate tool to avoid damage to the primary insulation.
4. Apply stress relief tape to the specified points before installing stress control tubes and cable lugs using mastic tape. Install anti-track tubes and sheds as required3 Simple Steps To Buy Verified Payoneer Account In 2024
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
The latest Heat Pump Manual from Newentide
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
More Related Content
What's hot
Automotive Circle Conference: bmw insight edition 2016 - Constellium presenta...
Constellium presented the theme "Stiffness Improved Aluminium Alloys for Automotive Body Sheet Applications"
Sudkabel EHV XLPE Cable Terminations & Cable Joints
1. The document discusses Südkabel's range of accessories for XLPE-insulated high and extra-high voltage cables, including compact terminations, outdoor terminations, and joints.
2. Südkabel offers a variety of compact termination types for different voltage applications that are maintenance-free, quick to install, and can accommodate different cable designs.
3. Outdoor terminations can be filled with liquid insulation or use dry, gas-filled designs. They meet relevant test standards and are available with composite or porcelain insulators.
REPORT ON FIRE INCIDENT
As on 03rd March 2018 around 2.30 PM a sudden Fire Incident took place at Huplong Bazar (Under Jubarajnagar RD Block, Dharmanagar, North Tripura), where as many as 110 Shops burned to ashes along with all the goods and furniture’s.
Welding book
THIS BOOK IS VERY IMPORTANT TO WHO IS GOING TO BE A WELDER TO CARRY OUT WELDING PROCESS IN A WELDING WORKSHOP.
Pqr asme ix completed
This document is a welder performance qualification record that certifies welder Elder Z.W. It summarizes the tests conducted including:
- Welding process used was gas tungsten arc welding in the 6G position.
- Materials welded were SA-106 Grade B carbon steel pipes 0.875 inches thick.
- Visual and guided bend tests were conducted and met the acceptance criteria of ASME Section IX.
Overview fusion welding standards
This document provides an overview of European and international standards related to welding. It lists numerous standards organized by topic, including standards for welding procedures, welder qualification, inspection and testing of welds, classification of welding consumables, and safety. The standards cover various welding processes and materials like steel, aluminum, titanium and more.
Wind Turbine Blade Reliability, Effects of Manufacturing Defects and Composit...
Wind Turbine Blade Reliability, Effects of Manufacturing Defects and Composit...Sandia National Laboratories: Energy & Climate: Renewables
This document summarizes research on defects in wind turbine composite materials and repairs. It discusses how manufacturing defects like waves and porosity affect the strength of composite laminates and substructures. Both experimental testing and computational modeling were used to analyze the effects of full-width and partial-width defects. The results show that partial defects allow for more load redistribution than full defects. Adhesive bonding quality and thick adhesive joints were also discussed. Composite repair techniques and their effects were evaluated through testing of coupons and substructures.Flange Bolt Chart
This document provides specifications for flanges and bolts for piping systems. It includes tables with information on flange size, bolt quantity, stud size, and end-to-end length for different pipe sizes. The tables cover Class 150, 300, 400, 600 and 900 flanges under product lines such as Series A, B, and others.
Torque to yield fasteners
Torque-to-yield bolts are better than standard bolts for clamping because they provide more consistent torque over varying conditions and are designed to match the gasket and prevent failures. The bolts stretch into the plastic deformation region when tightened, meaning they will not loosen on their own. However, overtightening the bolts can cause them to snap, so it is important to follow the shop manual's instructions for the correct torque and tightening procedure.
Brugg Cable Tools - High Voltage Cable Jointing Tools
This document provides information on various tools from Brugg Cables for working with polymer cables, including:
1) Cutting and peeling devices for shaping cable insulation up to diameters of 130mm and 150mm.
2) A handheld peeling and stripping tool for removing outer layers from cables up to 160mm diameter.
3) Motorized peeling tools for removing semiconductor layers from cables up to 150mm diameter.
4) An electro-hydraulic pump and press head for pressing bolts and sleeves onto cables up to 1000mm2.
U.S. Bellows Expansion Joints In-Depth Webinar
U.S. Bellows is a manufacturer of metallic and fabric expansion joints located in Houston, Texas. They have over 450,000 square feet of manufacturing space and 800 years of combined experience among their staff. U.S. Bellows produces a wide variety of expansion joints from 2 to 138 inches in diameter out of materials like stainless steel, Monel, and Hastelloy to withstand high temperatures and corrosion. They provide expansion joints, technical support, and custom engineering solutions to industries worldwide.
SPIROL Slotted Spring Pin Design Guide
Slotted spring pins are general purpose fasteners that provide continuous pressure inside holes due to their spring action. They can accommodate wider tolerances than solid pins, reducing manufacturing costs. SPIROL slotted pins have advantages over other brands like lower insertion force and better conformance to holes. SPIROL is a global supplier of high quality slotted pins and offers various sizes, materials, finishes and related installation equipment.
criteria of weld defects
The document discusses weld defect acceptance criteria according to different codes such as ASTM B31.1, ASME VIII, ASME B31.3, and AWS D1.1. It provides details on acceptance limits for various weld defects depending on the examination method, material thickness, loading conditions, and material application. Defects discussed include cracks, lack of fusion, incomplete penetration, undercuts, porosity, and reinforcement. Acceptance criteria include maximum defect sizes, numbers of defects allowed, cumulative lengths of defects, and distances between defects.
Orifice Plates
The document discusses orifice plate flow measurement. It describes the different types of orifice plates including square edge, quarter circle, segmental, and eccentric. It also discusses orifice plate materials like stainless steel, Hastelloy, Monel, and titanium. The document provides details on ANSI B16.36 orifice flanges, integral orifice assemblies, impulse piping, and technical specifications.
Copper wire drawing and enamelling
Copper Wire Drawing and Enamelling. Manufacturing of Copper and Copper Products. Start Your Own Industry In Wire & Copper.
Copper wire is an essential material for motor and transformer winding. Copper wire is available in different gauges (32 gauge to 18 gauge). The gauge of the copper wire depends upon the winding required for the specific motor or transformer. The wire having conductor diameter from 0.500 to 4.000 mm, is suitable for submersible motor winding. There is a heavy market for copper wire/enamelled copper wire in motor and transformer manufacturers and this wire is also used in rewinding of motors and transformers. Reasons for its wide use is that the copper has resistance to atmospheric corrosion because of the formation of uniform layer of oxide on the surface of metal.
For More Details, Click Here: https://niir.org/profile-project-reports/profiles/copper-copper-products-projects/z,,61,14,a/index.html?_sort_by=default
https://niir.org/profile-project-reports/profile/4530/copper-wire-drawing-enamelling.html
Contact us
Niir Project Consultancy Services
An ISO 9001:2015 Company
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
277 1992
This document is the Indian Standard specification for galvanized steel sheets, both plain and corrugated. It outlines the requirements, classifications, testing procedures and tolerances for galvanized steel sheets intended for general purposes like panelling and roofing. The standard specifies three classifications for galvanized plain and corrugated sheets based on the grade of raw material used. It also provides requirements for the zinc coating thickness, bend testing, coating mass determination and retests in case of failure. Dimensions and tolerances for plain sheets/coils are defined.
Fatigue Technology - Corporate Brochure
FTI is a leading provider of cold expansion products for the aerospace industry. Their products include bushings, fittings, fastening systems, and cold working solutions that are engineered to improve structural performance, reduce costs, and simplify production and maintenance. FTI has over 40 years of experience innovating cold expansion technologies and working closely with customers such as Boeing and the US Air Force to develop solutions that optimize aircraft structural integrity and performance.
Swagelok
Este documento proporciona información sobre diferentes tipos de mangueras y tubos flexibles, incluyendo sus materiales de construcción, tamaños disponibles, rangos de presión y temperatura de servicio. Se incluye una guía de selección que resume las especificaciones clave de cada serie. El documento también contiene términos relacionados con las mangueras y tubos flexibles.
Asme sec viii div 2
This document summarizes ASME Section VIII Division 2 requirements for welding and non-destructive testing of welds. It outlines weld categories, fabrication requirements including repair of defects, welding identification markings, and acceptance standards for radiographic, penetrant, and ultrasonic testing of welds. Impact testing of welds is also addressed including testing of vessel test plates to qualify welding procedures for different weld categories.
2. Heat Shrink Cable Termination (HV) - 11kV 33kV Single Core XLPE BS6622 Cables
2. Heat Shrink Cable Termination (HV) - 11kV 33kV Single Core XLPE BS6622 CablesThorne & Derrick International
This document provides installation instructions for heat shrink termination of single core polymeric cables rated between 7.2kV and 36kV. The instructions are as follows:
1. Remove the outer cable sheath to the specified length and remove any fillers.
2. Treat the cable screen by applying mastic tape and removing copper wires or tape to the specified points before attaching an earth braid.
3. Treat the conductive layer by removing it to the specified points using the appropriate tool to avoid damage to the primary insulation.
4. Apply stress relief tape to the specified points before installing stress control tubes and cable lugs using mastic tape. Install anti-track tubes and sheds as requiredWhat's hot (20)
Automotive Circle Conference: bmw insight edition 2016 - Constellium presenta...
Automotive Circle Conference: bmw insight edition 2016 - Constellium presenta...
Sudkabel EHV XLPE Cable Terminations & Cable Joints
Sudkabel EHV XLPE Cable Terminations & Cable Joints
Wind Turbine Blade Reliability, Effects of Manufacturing Defects and Composit...
Wind Turbine Blade Reliability, Effects of Manufacturing Defects and Composit...
Brugg Cable Tools - High Voltage Cable Jointing Tools
Brugg Cable Tools - High Voltage Cable Jointing Tools
2. Heat Shrink Cable Termination (HV) - 11kV 33kV Single Core XLPE BS6622 Cables
2. Heat Shrink Cable Termination (HV) - 11kV 33kV Single Core XLPE BS6622 Cables
Recently uploaded
3 Simple Steps To Buy Verified Payoneer Account In 2024
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
The latest Heat Pump Manual from Newentide
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & InnovationOperational Excellence Consulting
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentationsNIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
“After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.”
一比一原版(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证文凭如何办理
永久可查学历认证【微信：A575476】【(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Profiles of Iconic Fashion Personalities.pdf
The fashion industry is dynamic and ever-changing, continuously sculpted by trailblazing visionaries who challenge norms and redefine beauty. This document delves into the profiles of some of the most iconic fashion personalities whose impact has left a lasting impression on the industry. From timeless designers to modern-day influencers, each individual has uniquely woven their thread into the rich fabric of fashion history, contributing to its ongoing evolution.
Maksym Vyshnivetskyi: PMO KPIs (UA) (#12)
Maksym Vyshnivetskyi: PMO KPIs (UA)
Lemberg PMO School 2024
Website – https://lembs.com/pmoschool
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Digital Transformation Frameworks: Driving Digital Excellence
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Schedule Unveiled
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
2022 Vintage Roman Numerals Men Rings
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
Leaders who possess self-awareness deeply understand their emotions, strengths, and weaknesses.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
TIMES BPO: Business Plan For Startup Industry
Starting a business is like embarking on an unpredictable adventure. It’s a journey filled with highs and lows, victories and defeats. But what if I told you that those setbacks and failures could be the very stepping stones that lead you to fortune? Let’s explore how resilience, adaptability, and strategic thinking can transform adversity into opportunity.
Best practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
Recently uploaded (20)
3 Simple Steps To Buy Verified Payoneer Account In 2024
3 Simple Steps To Buy Verified Payoneer Account In 2024
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & Innovation
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
Digital Transformation Frameworks: Driving Digital Excellence
Digital Transformation Frameworks: Driving Digital Excellence
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
JM- iso 898 1 bolt mechanical properties and head marking
- 1. Bolt Size Tension Stength Yield Strength Proof Load Stress Enlogation mm Mpa Mpa Mpa % 4.6 400min 240min 225 22 B67-95 4.8 420min 340min 310 - B71-95 5.6 500min 300min 280 20 B79-95 5.8 520min 420min 380 - B 82-95 6.8 600min 480min 440 - B 89-99.5 ≤16 800min 640min 580 12 C22-32 >16 830min 660min 600 12 C23-34 10.9 1000min 940min 830 9 C32-39 12.9 1080min 1100min 970 8 C39-44 ISO 898-1 Bolt Mechanical Properties and Head Marking The value-added source for quailty bolts, nuts, screw, washers and other industrial fasteners & hardwares Tel:0086-21 33328690 Fax:021-68413263 Shanghai Jian & Mei Industry and Trade Co.,Ltd E-mail: info@jm-industry.com Head Marking ISO 898-1 2009(DIN931/9 33) Standar for Bolt Grade Hardness 8.8