Jis g4104 79
•
2 likes•1,107 views
The document contains multiple repetitions of the phrase "Copyright by the Japanese Industrial Standards" followed by a date and time. Each entry is separated by blank lines and there are a total of 12 entries spanning dates from August 25, 2001 at 09:31:35 to 09:32:51, with most entries occurring within one second of each other.
Report
Share
Report
Share
Download to read offline
Recommended
Tank heating calculation
Tank heating by hot oil which is batch process. For sizing of heating coil and hot oil heater.
Em03 welded steel penstocks
This document provides guidance on designing and constructing welded steel penstocks. It discusses factors to consider such as location, economics, head losses, stresses, supports, bends, accessories, materials, fabrication, installation, specifications, and corrosion control. Welded steel penstocks are well-suited for transmitting water from reservoirs or dams to hydroelectric turbines due to their strength and flexibility. They are designed according to codes like the ASME Boiler and Pressure Vessel Code to ensure safety. The document is intended to help designers solve problems and construct penstocks safely and efficiently.
Pipe Clamp Design, Application & Installation - November
This Webinar presentation includes pipe clamps, hold-down clamps, riser clamps and structural supports. Learn how the appropriate type of pipe support is chosen based on the different design conditions. Find out how Finite Element Analysis is used in the design process and view the custom pipe supports designed for extreme applications.
ASME BOILER & PRESSURE SECTION VIII.ppt
The document summarizes the American Society of Mechanical Engineers (ASME) Boiler & Pressure Vessel Code. It describes how the ASME committee was formed in 1911 to establish standards for steam boilers and pressure vessels. The code now provides rules for construction, inspection, testing, and certification of pressure vessels and includes sections on materials, welding, nondestructive examination, and care of boilers. Section VIII specifically addresses construction of unfired pressure vessels and has three divisions with different design requirements, testing criteria, and limitations on vessel use.
Power Piping ASME Guide.PDF
This document provides an introduction and overview of the book "Power Piping: The Complete Guide to ASME B31.1" by Charles Becht IV. It discusses the book's coverage of the ASME B31.1 code for power piping systems, the qualifications and experience of the author, and the book's table of contents. The introduction also provides brief biographies of Charles Becht and an overview of his extensive experience with pressure vessels and piping codes and standards.
smacna cad standard
This document provides guidelines for CAD layer standards for mechanical, plumbing and fire protection drawings. It summarizes the SMACNA CAD Standard, which was developed to promote consistency in CAD layer naming and organization. The standard builds upon the National CAD Standard and provides layer naming conventions for elements from various disciplines to allow for efficient sharing and manipulation of data between design professionals using CAD software. It includes recommendations for layer structure, guidelines for layer use, and specific layer names for mechanical, plumbing and fire protection components to facilitate coordination and integration of building information.
USSeal Catalog 2012 - Complete catalog
This catalog from U.S. Seal Mfg provides information for selecting replacement mechanical seals for pumps. It includes cross-reference tables to identify the correct U.S. Seal Mfg part number based on the pump manufacturer's part number. The catalog also details the various seal types and materials offered by U.S. Seal Mfg as well as installation instructions and troubleshooting guidance. Customers can use this catalog to find replacement seals for pumps from manufacturers in various industries such as water, petrochemical, food processing, and more.
Flow Induced Vibration of tubes and tube tanks- Kanwar Prateek
This document discusses fluid-induced vibration (FIV) in heat exchangers. It covers topics like vortex shedding, synchronization, critical velocity, fluid-elastic instability, and vibration damage patterns. The key points are:
- Vortex shedding from cylindrical structures can cause fluid excitation forces at the shedding frequency, and fluid-structure coupling forces if that frequency matches structural natural frequencies.
- There is a critical cross-flow velocity at which fluid-elastic instability occurs, causing rapid increases in vibration amplitude.
- Vibration damage in heat exchangers can include tube collisions, baffle damage, tube sheet effects, and acoustic resonance failures.
Recommended
Tank heating calculation
Tank heating by hot oil which is batch process. For sizing of heating coil and hot oil heater.
Em03 welded steel penstocks
This document provides guidance on designing and constructing welded steel penstocks. It discusses factors to consider such as location, economics, head losses, stresses, supports, bends, accessories, materials, fabrication, installation, specifications, and corrosion control. Welded steel penstocks are well-suited for transmitting water from reservoirs or dams to hydroelectric turbines due to their strength and flexibility. They are designed according to codes like the ASME Boiler and Pressure Vessel Code to ensure safety. The document is intended to help designers solve problems and construct penstocks safely and efficiently.
Pipe Clamp Design, Application & Installation - November
This Webinar presentation includes pipe clamps, hold-down clamps, riser clamps and structural supports. Learn how the appropriate type of pipe support is chosen based on the different design conditions. Find out how Finite Element Analysis is used in the design process and view the custom pipe supports designed for extreme applications.
ASME BOILER & PRESSURE SECTION VIII.ppt
The document summarizes the American Society of Mechanical Engineers (ASME) Boiler & Pressure Vessel Code. It describes how the ASME committee was formed in 1911 to establish standards for steam boilers and pressure vessels. The code now provides rules for construction, inspection, testing, and certification of pressure vessels and includes sections on materials, welding, nondestructive examination, and care of boilers. Section VIII specifically addresses construction of unfired pressure vessels and has three divisions with different design requirements, testing criteria, and limitations on vessel use.
Power Piping ASME Guide.PDF
This document provides an introduction and overview of the book "Power Piping: The Complete Guide to ASME B31.1" by Charles Becht IV. It discusses the book's coverage of the ASME B31.1 code for power piping systems, the qualifications and experience of the author, and the book's table of contents. The introduction also provides brief biographies of Charles Becht and an overview of his extensive experience with pressure vessels and piping codes and standards.
smacna cad standard
This document provides guidelines for CAD layer standards for mechanical, plumbing and fire protection drawings. It summarizes the SMACNA CAD Standard, which was developed to promote consistency in CAD layer naming and organization. The standard builds upon the National CAD Standard and provides layer naming conventions for elements from various disciplines to allow for efficient sharing and manipulation of data between design professionals using CAD software. It includes recommendations for layer structure, guidelines for layer use, and specific layer names for mechanical, plumbing and fire protection components to facilitate coordination and integration of building information.
USSeal Catalog 2012 - Complete catalog
This catalog from U.S. Seal Mfg provides information for selecting replacement mechanical seals for pumps. It includes cross-reference tables to identify the correct U.S. Seal Mfg part number based on the pump manufacturer's part number. The catalog also details the various seal types and materials offered by U.S. Seal Mfg as well as installation instructions and troubleshooting guidance. Customers can use this catalog to find replacement seals for pumps from manufacturers in various industries such as water, petrochemical, food processing, and more.
Flow Induced Vibration of tubes and tube tanks- Kanwar Prateek
This document discusses fluid-induced vibration (FIV) in heat exchangers. It covers topics like vortex shedding, synchronization, critical velocity, fluid-elastic instability, and vibration damage patterns. The key points are:
- Vortex shedding from cylindrical structures can cause fluid excitation forces at the shedding frequency, and fluid-structure coupling forces if that frequency matches structural natural frequencies.
- There is a critical cross-flow velocity at which fluid-elastic instability occurs, causing rapid increases in vibration amplitude.
- Vibration damage in heat exchangers can include tube collisions, baffle damage, tube sheet effects, and acoustic resonance failures.
MANUAL.pdf
This document provides installation, operation and maintenance instructions for McIntyre 320, 407, 500 and 600 alligator shear models. It details safety warnings, component specifications, daily inspection checks, troubleshooting tips, and procedures for blade replacement and hydraulic system maintenance. Record keeping sections include operator training, safety checklists and equipment ownership documents.
Basic engineering design_guide_r_0
This document provides a basic engineering design guide for the El Palito Refinery Expansion Project in Venezuela. The project involves installing new units and revamping existing units to allow the refinery to process new heavy crude oil blends.
The main process units included are a new atmospheric and vacuum distillation unit with a capacity of 140 thousand barrels per day, revamp of existing distillation units, a new naphtha hydrotreating and continuous catalytic reforming unit, and a new vacuum gas oil hydrotreating unit. The document outlines the engineering procedures, design considerations, and standards to be used for the project.
API 600 - Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets
This presentation briefs about the basic requirements & overall structure of API 600 Standard. The presentation includes clause by clause illustration with examples. NPS 4 (DN 100) Class 150 (PN 20) Manually Operated Bolted Bonnet Gate Valve is taken as an example & the requirements for this valve has been highlighted in the presentation. So that it becomes easy for one to understand what API is asking for.
The various screenshots from different standards are added to make it simpler & easier to understand. The detailed guidelines for testing of the prototype valve (example) from API 598 have been included in this presentation. Similarly, marking guidelines are taken from ASME B16.34 as specified in this standard.
API 600 is the primary steel gate valve purchase specification. API 600 details valve design/construction criteria as well as material/trim designations. ISO 10434 is a similar spec published in the ISO format.
For any queries, feel free to contact me at mistrynilesh@icloud.com
Asme b 36.19
This document provides standards for stainless steel pipe, including specifications for size, materials, wall thickness, weights, and permissible variations. It defines the scope as covering dimensions of welded and seamless stainless steel pipe for high or low temperatures and pressures. Size is identified by nominal pipe size. Wall thicknesses for various pipe schedules are provided in Table 1. Nominal weights are calculated using provided formulas and rounded values for outside diameter and wall thickness.
Isla de jekyll y reserva federal
Según Edward Griffin, la eliminación del Sistema de la Reserva Federal debe producirse por siete motivos:
Es incapaz de cumplir los objetivos que tiene establecidos.
Es un cartel que opera en contra del bien común.
Es un instrumento supremo de usura.
Genera el impuesto más injusto, que es la inflación.
Alimenta la guerra.
Desestabiliza la economía.
Es un instrumento de totalitarismo.
Bsi bs en_iso_9692-1_welding_and_allied_processes_recommendations_for_joint_p...
This document provides recommendations for joint preparation for manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding, and beam welding of steels. It specifies the materials in scope, welding processes covered, required finish of the joint preparation, and types of joint preparation that can be used. The document supersedes a previous British standard and is the adopted English language version of the European standard EN ISO 9692-1:2003.
Basic vibration analysis ii
Misalignment in rotating equipment can occur in two types - angular or offset. Angular misalignment produces axial vibration at 1X RPM while offset produces radial vibration at 2X or 3X RPM. Misalignment is characterized by high axial vibration levels at 1, 2, and 3X shaft RPM as well as high radial vibration at these frequencies. The waveform will be repeatable with one or two clear peaks per revolution and a 180 degree phase shift across couplings. If the 2X amplitude is over 50% of 1X, coupling damage can occur, and over 150% requires stopping for correction.
Hi-Lok Installation
As well as product supply - Blue Sky Industries have the technical experience to provide engineering support if & where required.
Design of Ice Manufacturing Plant 2000 lb
This document describes the design of an ice manufacturing plant with a production capacity of 2000 pounds per day. It discusses the main components of the refrigeration system, including the condenser, compressor, evaporator and expansion device. The design calculations determine the required cooling capacity, compressor size, evaporator tube length, and condenser tube length. These include determining the heat rejected from water, refrigerant flow rate, piston displacement, heat transfer coefficients, and surface areas. The goal is to reduce the water temperature from 27°C to -7.2°C. The design considers factors like refrigerant type, operating temperatures, compressor speed, and heat exchange calculations.
Stahl 8570 - 16Amp Plugs & Switched Sockets & Couplers Zone 1 & 2 (ATEX IECEx)
Stahl 8570 - 16Amp Plugs & Switched Sockets & Couplers Zone 1 & 2 (ATEX IECEx)Thorne & Derrick International
This document provides information on plugs and sockets from the SolConeX and CES series from R. STAHL for applications ranging from 16A to 125A. It includes selection tables that list the various models of plugs and sockets with details on their voltage ranges, pole configurations, ordering codes, and weights. Dimensional drawings with measurements are also provided.Refrigeration cycle
The document discusses the ideal and actual vapor-compression refrigeration cycles. The ideal cycle involves reversible processes while the actual cycle accounts for irreversibilities in components. Several refrigerants are discussed for use in refrigeration systems, with factors like ozone depletion and global warming potential considered in selection. Heat pumps are also covered, with air, water, and ground-source systems compared for heating and cooling applications.
U.S. Bellows Expansion Joints In-Depth Webinar
U.S. Bellows is a manufacturer of metallic and fabric expansion joints located in Houston, Texas. They have over 450,000 square feet of manufacturing space and 800 years of combined experience among their staff. U.S. Bellows produces a wide variety of expansion joints from 2 to 138 inches in diameter out of materials like stainless steel, Monel, and Hastelloy to withstand high temperatures and corrosion. They provide expansion joints, technical support, and custom engineering solutions to industries worldwide.
Psychrometry & Air Conditioning
Psychrometry & Air Conditioning: Psychrometry, psychrometry chart and various psychometric processes, comfort and industrial air conditioning, effective temperature and comfort chart, unitary and central air conditioning systems.
AWS-Z49-2021.pdf
This document is the American National Standard Z49.1:2021 which provides safety requirements for welding, cutting, and allied processes. It aims to protect both personnel and property from injuries, illnesses, fires, and explosions that can arise from these processes. The standard provides guidance for educators, operators, managers, supervisors on the safe setup, use of equipment, and performance of welding and cutting operations. It includes safety provisions for processes like oxy-fuel gas welding, arc welding, resistance welding, laser beam welding, and brazing but also applies more generally to other welding processes. The standard does not pertain to equipment design/manufacture, building systems, bulk gas supply systems, or electrical installations. Equivalent or superior
Approve standard for diesel engine fire pump drivers
This document provides standards for approval of diesel engine fire pump drivers. It outlines requirements in several areas, including physical features, instrumentation and controls, starting and fuel systems, performance testing, and markings. Products must demonstrate meeting the intent of the standards through testing and quality control to receive FM Approval. Continued approval depends on compliance with agreements and satisfactory field performance based on re-examinations and audits. The standards aim to facilitate technological development while preventing property damage.
Pipeline integrity documentation
Pipeline documentation is required to provide a history of pipelines and ensure regulatory compliance. Key documents that should be retained include pipeline maps, licensing information, inspection records, corrosion monitoring data, repair reports, and audit results. Proper documentation of tasks like right-of-way patrols, material balances, shutdown device testing, corrosion assessments, and repairs provides a history to evaluate pipeline integrity and ensure safety requirements are met. Documentation should generally be kept for the life of the pipeline.
6502 in action
This document summarizes a presentation given by Greg James, Barry Silverman, and Brian Silverman at SIGGRAPH 2010. The presentation discussed their ongoing project to preserve and document historic computer systems through simulation. It focused on their accurate simulation of the MOS Technology 6502 CPU at the transistor level using polygon models. The simulation was then combined with a simulation of the Atari TIA chip to generate video output and emulate 2600 games. The goal is to honor the pioneers behind early computer graphics and make these systems accessible for education.
Boxer BM 150 UG 2022.pdf
This document is a spare parts catalogue for the Boxer BM 150 motorcycle. It contains pictorial indexes that allow users to locate parts by plate number and page number. The catalogue provides part numbers, descriptions, and other details to help users correctly identify and order spare parts. Instructions are provided on how to read the catalogue and order parts correctly. Abbreviations used in the catalogue are also defined to help users understand part information.
Cooling system ppt
The document provides an overview of cooling systems for automobile engines. It discusses that cooling systems control an engine's temperature for optimal performance. There are two main types: air cooling systems which use air flow over the engine, and liquid cooling systems which circulate coolant through water jackets. Liquid cooling systems have advantages like more uniform cooling and lower fuel consumption, but have disadvantages like higher cost and requirement of water jackets. The document outlines different liquid cooling system types like thermosyphon, forced pump, and thermostatic regulator cooling.
3 electro hydraulic, component, circuits
The document discusses electro-hydraulic circuits and components. It describes how signal input can be manual, mechanical, or electronic and then processed hydraulically or electrically. It outlines the main components of hydraulic systems like directional control valves and solenoid valves. Solenoid valves are described as electromechanically operated valves that use electrical current to switch fluid flow. Electrical control of circuits is also covered including relays, switches, and logic functions. Sensors like limit switches and proximity sensors are explained for use in hydraulic systems.
More Related Content
What's hot
MANUAL.pdf
This document provides installation, operation and maintenance instructions for McIntyre 320, 407, 500 and 600 alligator shear models. It details safety warnings, component specifications, daily inspection checks, troubleshooting tips, and procedures for blade replacement and hydraulic system maintenance. Record keeping sections include operator training, safety checklists and equipment ownership documents.
Basic engineering design_guide_r_0
This document provides a basic engineering design guide for the El Palito Refinery Expansion Project in Venezuela. The project involves installing new units and revamping existing units to allow the refinery to process new heavy crude oil blends.
The main process units included are a new atmospheric and vacuum distillation unit with a capacity of 140 thousand barrels per day, revamp of existing distillation units, a new naphtha hydrotreating and continuous catalytic reforming unit, and a new vacuum gas oil hydrotreating unit. The document outlines the engineering procedures, design considerations, and standards to be used for the project.
API 600 - Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets
This presentation briefs about the basic requirements & overall structure of API 600 Standard. The presentation includes clause by clause illustration with examples. NPS 4 (DN 100) Class 150 (PN 20) Manually Operated Bolted Bonnet Gate Valve is taken as an example & the requirements for this valve has been highlighted in the presentation. So that it becomes easy for one to understand what API is asking for.
The various screenshots from different standards are added to make it simpler & easier to understand. The detailed guidelines for testing of the prototype valve (example) from API 598 have been included in this presentation. Similarly, marking guidelines are taken from ASME B16.34 as specified in this standard.
API 600 is the primary steel gate valve purchase specification. API 600 details valve design/construction criteria as well as material/trim designations. ISO 10434 is a similar spec published in the ISO format.
For any queries, feel free to contact me at mistrynilesh@icloud.com
Asme b 36.19
This document provides standards for stainless steel pipe, including specifications for size, materials, wall thickness, weights, and permissible variations. It defines the scope as covering dimensions of welded and seamless stainless steel pipe for high or low temperatures and pressures. Size is identified by nominal pipe size. Wall thicknesses for various pipe schedules are provided in Table 1. Nominal weights are calculated using provided formulas and rounded values for outside diameter and wall thickness.
Isla de jekyll y reserva federal
Según Edward Griffin, la eliminación del Sistema de la Reserva Federal debe producirse por siete motivos:
Es incapaz de cumplir los objetivos que tiene establecidos.
Es un cartel que opera en contra del bien común.
Es un instrumento supremo de usura.
Genera el impuesto más injusto, que es la inflación.
Alimenta la guerra.
Desestabiliza la economía.
Es un instrumento de totalitarismo.
Bsi bs en_iso_9692-1_welding_and_allied_processes_recommendations_for_joint_p...
This document provides recommendations for joint preparation for manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding, and beam welding of steels. It specifies the materials in scope, welding processes covered, required finish of the joint preparation, and types of joint preparation that can be used. The document supersedes a previous British standard and is the adopted English language version of the European standard EN ISO 9692-1:2003.
Basic vibration analysis ii
Misalignment in rotating equipment can occur in two types - angular or offset. Angular misalignment produces axial vibration at 1X RPM while offset produces radial vibration at 2X or 3X RPM. Misalignment is characterized by high axial vibration levels at 1, 2, and 3X shaft RPM as well as high radial vibration at these frequencies. The waveform will be repeatable with one or two clear peaks per revolution and a 180 degree phase shift across couplings. If the 2X amplitude is over 50% of 1X, coupling damage can occur, and over 150% requires stopping for correction.
Hi-Lok Installation
As well as product supply - Blue Sky Industries have the technical experience to provide engineering support if & where required.
Design of Ice Manufacturing Plant 2000 lb
This document describes the design of an ice manufacturing plant with a production capacity of 2000 pounds per day. It discusses the main components of the refrigeration system, including the condenser, compressor, evaporator and expansion device. The design calculations determine the required cooling capacity, compressor size, evaporator tube length, and condenser tube length. These include determining the heat rejected from water, refrigerant flow rate, piston displacement, heat transfer coefficients, and surface areas. The goal is to reduce the water temperature from 27°C to -7.2°C. The design considers factors like refrigerant type, operating temperatures, compressor speed, and heat exchange calculations.
Stahl 8570 - 16Amp Plugs & Switched Sockets & Couplers Zone 1 & 2 (ATEX IECEx)
Stahl 8570 - 16Amp Plugs & Switched Sockets & Couplers Zone 1 & 2 (ATEX IECEx)Thorne & Derrick International
This document provides information on plugs and sockets from the SolConeX and CES series from R. STAHL for applications ranging from 16A to 125A. It includes selection tables that list the various models of plugs and sockets with details on their voltage ranges, pole configurations, ordering codes, and weights. Dimensional drawings with measurements are also provided.Refrigeration cycle
The document discusses the ideal and actual vapor-compression refrigeration cycles. The ideal cycle involves reversible processes while the actual cycle accounts for irreversibilities in components. Several refrigerants are discussed for use in refrigeration systems, with factors like ozone depletion and global warming potential considered in selection. Heat pumps are also covered, with air, water, and ground-source systems compared for heating and cooling applications.
U.S. Bellows Expansion Joints In-Depth Webinar
U.S. Bellows is a manufacturer of metallic and fabric expansion joints located in Houston, Texas. They have over 450,000 square feet of manufacturing space and 800 years of combined experience among their staff. U.S. Bellows produces a wide variety of expansion joints from 2 to 138 inches in diameter out of materials like stainless steel, Monel, and Hastelloy to withstand high temperatures and corrosion. They provide expansion joints, technical support, and custom engineering solutions to industries worldwide.
Psychrometry & Air Conditioning
Psychrometry & Air Conditioning: Psychrometry, psychrometry chart and various psychometric processes, comfort and industrial air conditioning, effective temperature and comfort chart, unitary and central air conditioning systems.
AWS-Z49-2021.pdf
This document is the American National Standard Z49.1:2021 which provides safety requirements for welding, cutting, and allied processes. It aims to protect both personnel and property from injuries, illnesses, fires, and explosions that can arise from these processes. The standard provides guidance for educators, operators, managers, supervisors on the safe setup, use of equipment, and performance of welding and cutting operations. It includes safety provisions for processes like oxy-fuel gas welding, arc welding, resistance welding, laser beam welding, and brazing but also applies more generally to other welding processes. The standard does not pertain to equipment design/manufacture, building systems, bulk gas supply systems, or electrical installations. Equivalent or superior
Approve standard for diesel engine fire pump drivers
This document provides standards for approval of diesel engine fire pump drivers. It outlines requirements in several areas, including physical features, instrumentation and controls, starting and fuel systems, performance testing, and markings. Products must demonstrate meeting the intent of the standards through testing and quality control to receive FM Approval. Continued approval depends on compliance with agreements and satisfactory field performance based on re-examinations and audits. The standards aim to facilitate technological development while preventing property damage.
Pipeline integrity documentation
Pipeline documentation is required to provide a history of pipelines and ensure regulatory compliance. Key documents that should be retained include pipeline maps, licensing information, inspection records, corrosion monitoring data, repair reports, and audit results. Proper documentation of tasks like right-of-way patrols, material balances, shutdown device testing, corrosion assessments, and repairs provides a history to evaluate pipeline integrity and ensure safety requirements are met. Documentation should generally be kept for the life of the pipeline.
6502 in action
This document summarizes a presentation given by Greg James, Barry Silverman, and Brian Silverman at SIGGRAPH 2010. The presentation discussed their ongoing project to preserve and document historic computer systems through simulation. It focused on their accurate simulation of the MOS Technology 6502 CPU at the transistor level using polygon models. The simulation was then combined with a simulation of the Atari TIA chip to generate video output and emulate 2600 games. The goal is to honor the pioneers behind early computer graphics and make these systems accessible for education.
Boxer BM 150 UG 2022.pdf
This document is a spare parts catalogue for the Boxer BM 150 motorcycle. It contains pictorial indexes that allow users to locate parts by plate number and page number. The catalogue provides part numbers, descriptions, and other details to help users correctly identify and order spare parts. Instructions are provided on how to read the catalogue and order parts correctly. Abbreviations used in the catalogue are also defined to help users understand part information.
Cooling system ppt
The document provides an overview of cooling systems for automobile engines. It discusses that cooling systems control an engine's temperature for optimal performance. There are two main types: air cooling systems which use air flow over the engine, and liquid cooling systems which circulate coolant through water jackets. Liquid cooling systems have advantages like more uniform cooling and lower fuel consumption, but have disadvantages like higher cost and requirement of water jackets. The document outlines different liquid cooling system types like thermosyphon, forced pump, and thermostatic regulator cooling.
3 electro hydraulic, component, circuits
The document discusses electro-hydraulic circuits and components. It describes how signal input can be manual, mechanical, or electronic and then processed hydraulically or electrically. It outlines the main components of hydraulic systems like directional control valves and solenoid valves. Solenoid valves are described as electromechanically operated valves that use electrical current to switch fluid flow. Electrical control of circuits is also covered including relays, switches, and logic functions. Sensors like limit switches and proximity sensors are explained for use in hydraulic systems.
What's hot (20)
API 600 - Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets
API 600 - Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets
Bsi bs en_iso_9692-1_welding_and_allied_processes_recommendations_for_joint_p...
Bsi bs en_iso_9692-1_welding_and_allied_processes_recommendations_for_joint_p...
Stahl 8570 - 16Amp Plugs & Switched Sockets & Couplers Zone 1 & 2 (ATEX IECEx)
Stahl 8570 - 16Amp Plugs & Switched Sockets & Couplers Zone 1 & 2 (ATEX IECEx)
Approve standard for diesel engine fire pump drivers
Approve standard for diesel engine fire pump drivers
More from Serveone
Jis g4051 79
The document contains multiple repetitions of the copyright notice "Copyright by the Japanese Standards Association" followed by a date and time from Monday, June 4, 2001 between 13:33 and 13:34. It appears to be automatically generated copyright notices.
Jis g3106 95
The document repeatedly states "Copyright by the Japanese Industrial Standards" on multiple lines, indicating it asserts copyright of the Japanese Industrial Standards over some unstated work or material. It provides the copyright notice and date of Thursday, November 16, 2000 for each line.
Jis g3101 95
The document repeats the phrase "Copyright by the Japanese Industrial Standards" multiple times on different dates and times in 2001, indicating standards or works protected under copyright. No other substantive information is provided.
More from Serveone (6)
Jis g4104 79
- 1. Copyright by the Japanese Industrial Standards Sat Aug 25 09:31:35 2001
- 2. Copyright by the Japanese Industrial Standards Sat Aug 25 09:32:43 2001
- 3. Copyright by the Japanese Industrial Standards Sat Aug 25 09:32:44 2001
- 4. Copyright by the Japanese Industrial Standards Sat Aug 25 09:32:45 2001
- 5. Copyright by the Japanese Industrial Standards Sat Aug 25 09:32:46 2001
- 6. Copyright by the Japanese Industrial Standards Sat Aug 25 09:32:46 2001
- 7. Copyright by the Japanese Industrial Standards Sat Aug 25 09:32:47 2001
- 8. Copyright by the Japanese Industrial Standards Sat Aug 25 09:32:48 2001
- 9. Copyright by the Japanese Industrial Standards Sat Aug 25 09:32:48 2001
- 10. Copyright by the Japanese Industrial Standards Sat Aug 25 09:32:49 2001
- 11. Copyright by the Japanese Industrial Standards Sat Aug 25 09:32:50 2001
- 12. Copyright by the Japanese Industrial Standards Sat Aug 25 09:32:51 2001